EnOcean 2 Click Board
EnOcean 2 Click Board
Key Features
- Der 2,4 GHz IEEE 802.15.4 Funkstandard, EnOcean Serial Protocol 3.0, 3,3V Stromversorgung, UART-Schnittstelle
- Basierend auf dem TCM 515Z IEEE 802.15.4 Transceiver von EnOcean
- Integrieren Sie batterielose, kabellose Energy Harvesting-Module in Ihre Designs
- mikroBUS: UART-Schnittstelle
Das EnOcean 2 Click Board™ verfügt über den TCM 515Z-Transceiver, der auf dem 2,4-GHz-Funkstandard IEEE 802.15.4 basiert. Das Click Board™ ist für den Betrieb mit einer 3,3-V-Stromversorgung ausgelegt. Es kommuniziert über die UART-Schnittstelle mit dem Ziel-Mikrocontroller.
Dieses stromsparende Funkmodul ist für den Einsatz mit den Energy Harvesting-Modulen von EnOcean vorgesehen. Dabei handelt es sich um miniaturisierte Konverter, die Energie aus Bewegung, Licht oder Temperaturunterschieden gewinnen und in Form von batterielosen, drahtlosen Schaltern, Sensoren und Aktoren mit eigener Stromversorgung erhältlich sind.
The EnOcean 2 Click Board™ carries the TCM 515Z transceiver, based on the 2.4 GHz IEEE 802.15.4 radio standard. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over UART interface.
This low-powered wireless module is intended for use together with EnOcean's range of energy harvesting modules. These are miniaturized converters that harness energy from motion, light or temperature differences, that come in the form of self-powered, battery-free wireless switches, sensors and actuators.
TCM 515Z
TCM 515Z enables the realization of line-powered actuators, controllers, and gateways communicating based on the 2.4 GHz IEEE 802.15.4 radio standard.
It provides a transparent radio link between EnOcean 2.4 GHz devices and an external host connected via the standardized ESP3 interface (EnOcean Serial Protocol V3).
TCM 515Z works on a 2.4 GHz frequency for ZigBee systems.
ENOCEAN SERIAL PROTOCOL 3.0 (ESP3)
ESP3 is a Point-to-Point protocol with a packet data structure.
The maximum size of transferred data is 65535 bytes. Compared with ESP2.0, that has the maximum of 25 bytes, it's a considerable improvement.
ONBOARD ANTENNA
TCM 515Z receives and transmits data based on a 50Ω whip antenna connected to its ANTENNA input.
SPECIFICATIONS
Type | 2.4 GHz Transceivers,EnOcean |
Applications | Incorporate battery-free wireless energy harvesting modules into your designs |
On-board modules | TCM 515Z |
Key Features | the 2.4 GHz IEEE 802.15.4 radio standard, EnOcean Serial Protocol 3.0, 3.3V power supply, UART interface |
Interface | UART |
Compatibility | mikroBUS |
Click board size | L (57.15 x 25.4 mm) |
Input Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout of the EnOcean 2 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Notes | Pin | Pin | Notes | ||||
---|---|---|---|---|---|---|---|
NC | 1 | AN | PWM | 16 | NC | ||
NC | 2 | RST | INT | 15 | NC | ||
NC | 3 | CS | TX | 14 | UART_TX | UART transmit | |
NC | 4 | SCK | RX | 13 | UART_RX | UART receive | |
NC | 5 | MISO | SCL | 12 | NC | ||
NC | 6 | MOSI | SDA | 11 | NC | ||
Power supply | +3.3V | 7 | 3.3V | 5V | 10 | NC | |
Ground | GND | 8 | GND | GND | 9 | GND | Ground |
JUMPERS AND SETTINGS
Designator | Name | Default Position | Default Option | Description |
---|---|---|---|---|
JP1 | TURBO MODE | Right | Disable | Change the default ESP3 interface speed at power up from 57600 Bit per second to 460800 Bit per second. |
Software Support
Code examples for the EnOcean 2 Click Board™, written for MikroElektronika hardware and compilers are available on Libstock.
The library implements EnOcean Serial Protocol 3. It can be used for communication between a host and an EnOcean module. Recieved packets, if valid, are forwarded to a user via the callback function.
The demo demonstrates the library functionality using the EnOcean 2 Click Board™ and PTM215ZE Pushbutton Transmitter Module. When the user pushes the button, a corresponding LED is turned on or off.
CODE SNIPPET
The code snippet shows how to use library packet type and send command to an EnOcean module.
01 static void read_version() 02 { 03 esp3_packet_t cmd_packet; 04 uint8_t cmd_packet_buffer[1]; 05 06 cmd_packet.data_length = 1; 07 cmd_packet.option_length = 0; 08 cmd_packet.type = ESP3_TYPE_COMMON; 09 cmd_packet.data_buffer = cmd_packet_buffer; 10 // Command code. 11 cmd_packet_buffer[0] = ESP3_CO_RD_VERSION; 12 13 esp3_send(&cmd_packet); 14 }
Software Support
Code examples for the EnOcean 2 Click Board™, written for MikroElektronika hardware and compilers are available on Libstock.
The library implements EnOcean Serial Protocol 3. It can be used for communication between a host and an EnOcean module. Recieved packets, if valid, are forwarded to a user via the callback function.
The demo demonstrates the library functionality using the EnOcean 2 Click Board™ and PTM215ZE Pushbutton Transmitter Module. When the user pushes the button, a corresponding LED is turned on or off.
CODE SNIPPET
The code snippet shows how to use library packet type and send command to an EnOcean module.
01 static void read_version() 02 { 03 esp3_packet_t cmd_packet; 04 uint8_t cmd_packet_buffer[1]; 05 06 cmd_packet.data_length = 1; 07 cmd_packet.option_length = 0; 08 cmd_packet.type = ESP3_TYPE_COMMON; 09 cmd_packet.data_buffer = cmd_packet_buffer; 10 // Command code. 11 cmd_packet_buffer[0] = ESP3_CO_RD_VERSION; 12 13 esp3_send(&cmd_packet); 14 }
EnOcean 2 Click Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.