Zu Produktinformationen springen
1 von 5

Mikroelektronika d.o.o.

RTC 4 Click-Platine

RTC 4 Click-Platine

SKU: MIKROE-1891

Normaler Preis
€20,95 EUR ohne MwSt
Normaler Preis Verkaufspreis
€20,95 EUR ohne MwSt
Sale Ausverkauft
Versand wird beim Checkout berechnet
If no stock shown above, check availability
Vollständige Details anzeigen

Overview

The RTC 4 Click Board™ is a time measurement add-on board that incorporates DS2417 IC. The DS2417 is a real-time clock/calendar (RTC) with a fully compatible 1-Wire MicroLAN interface. It also features a programmable interrupt output for system wakeup on a separate pin. It utilizes an on-chip oscillator that is connected to an external 32.768 kHz crystal. Being a 1-Wire device, it features a unique, factory-lasered 64-bit long ROM code that allows the user to use it in a MicroLAN network.

It uses a backup energy source that maintains a charge with an onboard coin-cell 1F supercapacitor. The real-time clock has an accuracy of +/- 2 minutes per month at 25°C.

The RTC4 Click Board™ communicates with the target board MCU either through MikroBUS AN or PWM pin (here, GPI01, GPIO0), plus the INT pin, depending on the position of the onboard jumper.

Downloads

Das RTC 4 Click Board™ ist eine Zusatzplatine für Zeitmessungen, die DS2417 IC enthält. Das DS2417 ist eine Echtzeituhr/ein Echtzeitkalender (RTC) mit einer vollständig kompatiblen 1-Wire MicroLAN-Schnittstelle. Es verfügt außerdem über einen programmierbaren Interrupt-Ausgang zum Aktivieren des Systems auf einem separaten Pin. Es verwendet einen On-Chip-Oszillator, der an einen externen 32,768-kHz-Quarz angeschlossen ist. Da es sich um ein 1-Wire-Gerät handelt, verfügt es über einen einzigartigen, werkseitig gelaserten 64-Bit-ROM-Code, der es dem Benutzer ermöglicht, es in einem MicroLAN-Netzwerk zu verwenden.

Es verwendet eine Backup-Energiequelle, die die Ladung mithilfe eines integrierten 1F-Knopfzellen-Superkondensators aufrechterhält. Die Echtzeituhr hat bei 25 °C eine Genauigkeit von +/- 2 Minuten pro Monat.

Das RTC4 Click Board™ kommuniziert mit der MCU der Zielplatine entweder über den MikroBUS AN- oder PWM-Pin (hier GPI01, GPIO0) sowie den INT-Pin, abhängig von der Position des integrierten Jumpers.

Frequently Asked Questions

Have a Question?

Be the first to ask a question about this.

Ask a Question