Zu Produktinformationen springen
1 von 5

Mikroelektronika d.o.o.

Flammenklickbrett

Flammenklickbrett

SKU: MIKROE-1820

Normaler Preis
€11,95 EUR ohne MwSt
Normaler Preis Verkaufspreis
€11,95 EUR ohne MwSt
Sale Ausverkauft
Versand wird beim Checkout berechnet
If no stock shown above, check availability
Vollständige Details anzeigen

Overview

The MikroE Flame Click Board™ is a fire detection solution sensitive only to the infrared radiation from an open flame. This fire detector Click Board™ features a PT334-6B NPN silicon phototransistor covered in black epoxy. Being an infrared sensor, once properly calibrated, it can be used in a range of applications where you need to detect the presence of a high-heat source. Proper calibration can be done using the onboard potentiometer that allows the user to set up the exact detection threshold. When the threshold level is attained, the module sends an interrupt to the target board's MCU through the MikroBUS INT pin. Otherwise, the sensor can also output a continuous analogue signal through the MikroBUS AN pin.

Based on a highly sensitive phototransistor, the Flame Click Board™ has a faster reaction time than smoke or heat sensors and thus makes for a good choice for electric fuse boxes, motor boxes, cameras, etc. It is designed to use either a 3.3V or 5V power supply.

Das MikroE Flame Click Board™ ist eine Branderkennungslösung, die nur auf die Infrarotstrahlung einer offenen Flamme reagiert. Dieses Brandmelder Click Board™ verfügt über einen PT334-6B NPN-Silizium-Fototransistor, der mit schwarzem Epoxid beschichtet ist. Da es sich um einen Infrarotsensor handelt, kann er nach ordnungsgemäßer Kalibrierung in einer Reihe von Anwendungen eingesetzt werden, in denen Sie das Vorhandensein einer Hochwärmequelle erkennen müssen. Die ordnungsgemäße Kalibrierung kann mithilfe des integrierten Potentiometers erfolgen, mit dem der Benutzer den genauen Erkennungsschwellenwert einstellen kann. Wenn der Schwellenwert erreicht ist, sendet das Modul über den MikroBUS INT-Pin einen Interrupt an die MCU der Zielplatine. Andernfalls kann der Sensor auch ein kontinuierliches analoges Signal über den MikroBUS AN-Pin ausgeben.

Das Flame Click Board™ basiert auf einem hochempfindlichen Fototransistor und verfügt über eine schnellere Reaktionszeit als Rauch- oder Wärmesensoren. Daher ist es eine gute Wahl für Sicherungskästen, Motorkästen, Kameras usw. Es ist für die Verwendung mit einer 3,3-V- oder 5-V-Stromversorgung ausgelegt.

Frequently Asked Questions

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)