Lineeye Co Ltd
Lineeye LE-590TX Ethernet LAN Pakettester
Lineeye LE-590TX Ethernet LAN Pakettester
Verfügbarkeit für Abholungen konnte nicht geladen werden
Der Lineeye LE-590TX ist ein LAN-Analysator, der an den USB2.0-Anschluss eines PCs angeschlossen wird. Im TAP-Modus können Sie Vollduplex-Daten auf 10/100Base-TX erfassen und diese mit 480 Mbit/s über die USB 2.0-Schnittstelle an den PC übertragen. Im PG-Modus können Sie Testpakete mit einer Leitungsgeschwindigkeit von bis zu 100 Mbit/s generieren.
●Überprüfen der LAN-Protokolle und Daten der Kommunikation der Zielgeräte.
●Überprüfen und Analysieren des Datenverkehrs.
●Bereitstellung statistischer Informationen, wie etwa Fehlerrate usw.
●Testpakete für Netzwerktests erstellen.
●Messen der QoS, wie etwa Latenz usw.
● Studium von Netzwerkkommunikationsprotokollen.
Capture 10/100Mbps LAN Packets Via USB
TAP mode captures 10/100Mbps full-duplex data on PortA/ PortB, and transmits to PC via USB2.0 port. Captured data can be displayed on PC.
Filter To Capture The Specific Packets
LE-590TX is not only able to capture all frames but also filter the specific packets. Filtering conditions can be set by MAC/IP address, protocols (ARP/IP/ICMP/IGMP/TCP/UDP/use defined), and specifying IP address/port/packet size etc.
Visualize the amount of traffic
You can evaluate the amount of traffic visually by a line, pie, an bar graph.
Generate Packets Max. At 100Mbps Line Speed.
PG mode generates test packets at your specified transmitting speed. Tells you the processing ability of the network devices and how they work at the high traffic. Test packets are generated in the FPGA, so it will not be affected by the performance of PC.
User Defined Test Packets
The user can define 2-7 layer of data frames up to 64 for each of A and B port, and transmit them continuously or selected times. Add errors (CRC etc.) and VLAN tags. Captured packets can be used as transmitting packets.
RFC 2544 based Test Tool is attached
LINEEYE provide an Utility software "LE590-2544; which is basing on RFC 2544 (an technical standard of network interconnection).
- Throughput
- Latency
- Packet Loss
- Back to Back (Test of Buffer Capacity)
You can check those 4 tests by simple operation. The result can be output as a report.
Can be used as a NIC via USB
Using a LE590-NIC, the packet tester acts as a network interface via USB. LE590-NIC can also be used for firmware update too.
Lineeye LE-590TX Ethernet LAN Pakettester
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.