Zu Produktinformationen springen
1 von 2

Fieger Technology

Fieger ClampMan Leiterplattensonde

Fieger ClampMan Leiterplattensonde

SKU: CLM-1050

Normaler Preis
€678,95 EUR exc tax
Normaler Preis Verkaufspreis
€678,95 EUR exc tax
Sale Ausverkauft
Versand wird beim Checkout berechnet
If no stock is shown above, order now and we'll dispatch within 10 working days.

Zahlungsmethoden

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Banküberweisung
Vollständige Details anzeigen

Overview

The Fieger ClampMan Probe (CLM-1050) is a free-standing probe positioner for boards that cannot be clamped in a ClampMan Classic or Light. It comprises a 3 kg browned steel round base plate, one 400 mm hydraulic joint stand and a CLM-1110 probe holder with adjustable tip pressure, and the base takes up to four joint stands (300 mm or 400 mm). The oscilloscope probe is not included.

The Fieger ClampMan Probe (CLM-1050) is a free-standing probe positioner: a 3 kg round steel base plate, one 400 mm hydraulic joint stand and a CLM-1110 probe holder with adjustable tip pressure. Fieger designed it for probing boards that cannot be clamped in a ClampMan Classic or ClampMan Light, and the base plate takes up to four joint stands (300 mm or 400 mm), so one bench setup can hold several probes on a powered board while both hands stay free for the oscilloscope or the soldering iron.

The ClampMan Probe suits hardware and test engineers who spend long sessions on a single test point and need the probe to stay exactly where they put it.

A Stand-Alone Base for Up to Four Joint Stands

The CLM-1118 round base plate in the kit is made of browned steel and weighs 3 kg, so fitted arms stay firmly anchored in use. Fieger rates the base for a maximum of four joint stands (300 mm or 400 mm), so the CLM-1050 grows from a single probe point to four-point probing by adding arms rather than buying a second stand.

Hydraulic Joint Stand with About 400 mm Reach

The supplied 106327 hydraulic joint stand has an action radius of about 400 mm, which gives room to reach test points across the board from one base position. A quick-change (QC) adapter at the end of the stand lets you swap the probe holder for tweezers, a vice or your own fixture.

Probe Holder with Adjustable Tip Pressure

The CLM-1110 probe holder lets you set the contact pressure of the probe tip. That gives steady contact on a via or component lead during long captures, without excessive force on the circuit. The oscilloscope probe itself is not included.

Specifications

Order number CLM-1050
Supplied parts CLM-1118 round base plate, 106327 400 mm joint stand, CLM-1110 probe holder
Base plate Browned steel, 3 kg
Base plate capacity Up to four joint stands, 300 mm or 400 mm
Joint stand reach Action radius about 400 mm
Joint stand type Hydraulic
Tool mounting ClampMan quick-change (QC) adapter
Probe holder CLM-1110, adjustable tip pressure
Oscilloscope probe Not included

What's Included

CLM-1118 round base plate (browned steel, 3 kg), one 106327 400 mm hydraulic joint stand with quick-change adapter, one CLM-1110 probe holder. No oscilloscope probe.

Limitations

  • The CLM-1050 does not clamp the PCB. If the board needs holding as well as probing, use the ClampMan Light or the ClampMan Classic.
  • One joint stand and one probe holder are supplied. Each extra probe point needs a further 400 mm hydraulic arm and probe holder.
  • Fieger does not publish the maximum probe body width for the CLM-1110 holder. Ask us with your probe model before ordering.
  • Fieger does not publish holding force or tip-load figures for the stand or holder.

ClampMan Probe Compared with the Parts and the ClampMan Light

Item What it is Price
ClampMan Probe CLM-1050 (this product) Base plate, 400 mm joint stand and probe holder €678,95
ClampMan Round Base CLM-1118 3 kg steel base plate only €238,95
ClampMan Hydraulic ARM 400mm Extra joint stand for a second probe point €446,95
ClampMan Probe Holder Extra CLM-1110 holder with adjustable tip pressure €251,95
ClampMan Light PCB holder for smaller boards and parts from €753,95

Typical Applications

Holding a passive oscilloscope probe on a switch node or gate drive pin of a powered board while you adjust the timebase. Probing a board that is still fitted in its enclosure or harness, where it cannot be clamped. Two or more fixed probe points on a power-up sequence capture, built by adding joint stands and holders to the same base.

Order the Fieger ClampMan Probe €678,95 ex VAT. If you want extra arms or holders in the same order, ask us for a formal quotation.

Last reviewed: 30 October 2026

Sources (brochure and 3 manufacturer pages)
Ordering information
Part number (SKU)CLM-1050
ManufacturerFieger Technology
EAN5055383623068
Warranty12 Monate
Shipping weight4.0 kg
  • 1 × Fieger ClampMan Leiterplattensonde

Contact us to confirm the full contents of the box.

Engineer Q&A

Questions and Answers

4 questions
  • Is an Oscilloscope Probe Included?

    No. The CLM-1050 holds your own probe. It is supplied with the base plate, one 400 mm joint stand and the CLM-1110 probe holder.

    Answered by John LeggUpdated 30 Oct 2026
  • How Many Probes Can One Base Hold?

    Up to four. Fieger rates the base plate for a maximum of four joint stands (300 mm or 400 mm), each with its own holder.

    Answered by John LeggUpdated 30 Oct 2026
  • Will My Probe Fit the Holder?

    Fieger does not publish the maximum probe body width for the CLM-1110 holder, so ask us with your probe model before ordering.

    Answered by John LeggUpdated 30 Oct 2026
  • Can I Mount Other Tools on the Arm?

    Yes. The joint stand ends in a ClampMan quick-change adapter, so tweezers, a vice or your own fixture can replace the probe holder.

    Answered by John LeggUpdated 30 Oct 2026

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.