Mikroelektronika d.o.o.
EasyMx PRO v7 für STM32 MCU-Karte mit STM32F207VGT6
EasyMx PRO v7 für STM32 MCU-Karte mit STM32F207VGT6
Verfügbarkeit für Abholungen konnte nicht geladen werden
Overview
Die EasyMx PRO v7 für STM32 MCU-Karte mit STM32F207VCT6 ist mit einem STM32F207VCT6-Mikrocontroller mit On-Chip-Peripheriegeräten ausgestattet und ist eine großartige Wahl für Anfänger und Profis.
The STM32F207VGT6 MCU has .
- 120MHz frequency
- 1 Mbyte of Flash memory
- 128K + 4K bytes of general-purpose SRAM
- Integrated Ethernet controller
- USB 2.0 (OTG, Host, Device)
- 83 General purpose I/O pins
- 12x16-bit and 2x32-bit timers
- 3x12-bit A/D (24 channels)
- 2x12-bit D/A , 4xUSARTs, 2xUARTs
- Internal Real time clock (RTC)
- 2xI2C, 3xSPI and 2xCAN controllers
25MHz Crystal Oscillator
We carefully chose the most convenient crystal value that provides clock frequency which can be used directly, or with the PLL multipliers to create higher MCU clock value. MCU card also contains 32.768 kHz crystal oscillator which provides external clock for RTCC module.
USB Communications Lines
These two jumpers, when in USB position, connect D+ and D- lines of the on-board USB connector with PA11 and PA12 microcontroller pins. Since STM32F207VGT6 supports USB, jumpers are in USB position.
Ethernet Transceiver
MCU card contains single-chip Ethernet physical (PHY) layer transceiver which provides additional Ethernet functionality to STM32F207VGT6 controller .
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.