Dediprog Technology Co Ltd
Dediprog EM100Pro-G2 SPI NOR Flash-Emulator
Dediprog EM100Pro-G2 SPI NOR Flash-Emulator
Verfügbarkeit für Abholungen konnte nicht geladen werden
Overview
Der Dediprog EM100Pro-G2 ist ein SPI NOR Flash-Emulator mit integriertem Hochgeschwindigkeits-DRAM-Speicher, der die beste Code-Aktualisierungsleistung bietet. Dieses fortschrittliche Tool wurde in enger Zusammenarbeit mit den SPI NOR Flash-Lieferanten entwickelt, um das Verhalten aller SPI NOR Flash-Geräte auf dem Markt und auch des SPI NOR Flash der nächsten Generation zu emulieren.
Es bietet Ingenieuren ein flexibles Entwicklungs- und Testtool für jedes eingebettete Projekt, das einen externen SPI NOR Flash verwendet. Es bietet schnelle, schaltungsinterne Firmware-Testzyklen während der Entwicklung.
Benefits
- Minutes become seconds for SPI NOR Flash code update (3 seconds to update 2Gbit code)
- Save up to 1 hour every day for your development and reduce your time to market
- Debug efficiently your application through the available SPI bus with our SPI Trace, SPI Trigger, SPI Hyper Terminal for debug messages
- Develop your own application debugger via our bidirectional SPI Hyper terminal and control application from your host PC
- EM100Pro-G2 can connect with Intel motherboard by specific adaptor ISP-ADP-Intel-C (Option).
Performance (Erase+Program+Verify)
| Density | Programmer | EM100Pro-G2 Emulator |
| 8Mb | 9s | 3s |
| 16Mb | 13s | 3s |
| 32Mb | 16s | 3s |
| 64Mb | 38s | 3s |
| 128Mb | 75s | 3s |
| 256Mb | 115s | 3s |
| 512Mb | 200s | 3s |
| 1Gb | N/A | 3s |
| 2Gb | N/A | 3s |
Hardware
The EM100Pro-G2 has two 2.54mm pitch males connectors of:
- 2x2 for the Reset and Trig signals
- 2x10 for the Emulation signals
EM100Pro-G2 is designed with ISP header, through different cables/adaptors, it can connect to the PCB board directly. Please refer to Table 1 for EM100Pro-G2 2x10 header pin out.
DediProg also provides the EM100Pro-G2 ISP Cable which is used to connect the EM100Pro-G2 programmer to the 2X5 2.54mm ISP Pin Header on board, please refer to Table 2 for the EM100Pro-G2 ISP Cable 2x5 pin out.
EM100Pro-G2 ISP Header Pin Out
| 1 | NC | CS2 | 2 |
| 3 | CS1 | Vcc | 4 |
| 5 | MISO/DQ1 | Hold/DQ3 | 6 |
| 7 | Wp/DQ2 | CLK | 8 |
| 9 | GND | MOSI/DQ0 | 10 |
| 11 | 3.3V | NC | 12 |
| 13 | CTRL | NC | 14 |
| 15 | CTRL | 3.3V | 16 |
| 17 | CTRL | CTRL | 18 |
| 19 | GND | NC | 20 |
| 1 | GND | Reset | 2 |
| 3 | GND | Trig | 4 |
ISP Cable Connector Pin Out (2x5)
| 1 | NC | CS2 | 2 |
| 3 | CS1 | Vcc | 4 |
| 5 | MISO/DQ1 | Hold/DQ3 | 6 |
| 7 | Wp/DQ2 | CLK | 8 |
| 9 | GND | MOSI/DQ0 | 10 |
EM100Pro-G2 increases productivity by downloading firmware code or data into the emulator in a few seconds for density as large as 2Gb. In addition, it provides "SPI BUS Analyzer" feature by collecting all the SPI command and data on the SPI bus in order to help the debugging process.
It will speed up your firmware development and testing by eliminating the need to remove-erase-program and re-install SPI flash each time you test a code change.
If you want to stop the "program/insert/boot/remove/erase" cycle, then this is the tool for you.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.