So verwenden Sie Tag-Connect-Kabel mit dem XILINK-Debugger

The Xilinx (AMD) Platform Cable USB II ends in a 2 mm, 14-pin connector. Tag-Connect offers a 6-pin adapter and a 10-pin adapter for it, and also lists a 14-pin 2 mm cable for Platform Cable II programmers.

In short: for a 6-pin footprint use the TC-XILINX6 adapter with a TC2030-IDC cable. For a 10-pin footprint use the TC2050-XILINX adapter with a TC2050-IDC cable. Tag-Connect also lists the 14-pin TC2070-IDC-2MM for Platform Cable II programmers; confirm the fit with us before designing it in.

Recommended Parts

Board footprint Adapter Legged cable No-legs cable
6-pin TC2030 TC-XILINX6 TC2030-IDC TC2030-IDC-NL
10-pin TC2050 TC2050-XILINX TC2050-IDC TC2050-IDC-NL with TC2050-CLIP
14-pin TC2070 None TC2070-IDC-2MM / TC2070-IDC-NL-2MM

Adapters are supplied without cables. Tag-Connect recommends the legged TC2050 for robust debugging; no-legs clips may lose some grip over time. The female TC-XILINX6 and TC2050-XILINX suit the Platform Cable USB II; for Digilent JTAG-HS2 and HS3 cables use the -M versions.

Xilinx 14-Pin Connector Signals

Pin Signal
2 VREF
4 TMS
6 TCK
8 TDO
10 TDI
13 PGND
14 HALT (JTAG) / WP (SPI) / INIT (slave serial)

VREF supplies the cable's output buffers, so connect it to the target's JTAG I/O supply.

6-Pin TC2030 Signal Assignment

Pin 1 VREF, pin 2 TMS/SS/PROG, pin 3 TDI/MOSI/DIN, pin 4 TCK/SCLK/CCLK, pin 5 GND, pin 6 TDO/MISO/DONE. The 10-pin TC2050 route adds HALT, WP, INIT and PGND.

Frequently Asked Questions

Which Tag-Connect adapter fits the Xilinx Platform Cable USB II?

The TC-XILINX6 for a 6-pin footprint or the TC2050-XILINX for a 10-pin footprint. Tag-Connect also lists the TC2070-IDC-2MM 14-pin cable for Platform Cable II programmers.

Are the adapters supplied with a cable?

No. Order the TC2030-IDC or TC2050-IDC cable separately.

Related Guides

Sources

Last reviewed 22 November 2026 by The Debug Store, supplier of Tag-Connect cables.