The Xeltek SA001A is a PLCC20 socket adapter with an opentop socket for 20-pin PLCC devices in a 9 x 9 mm body at 1.27 mm lead pitch. It belongs to Xeltek's SA adapter series, which Xeltek lists for its 48-pin-driver SuperPro programmers, including the SuperPro M, and it is the smallest PLCC footprint in our Xeltek adapter range.
20-Pin PLCC Programmer Adapter for SA-Series SuperPro Programmers
Xeltek publishes a single compatibility chart for its socket adapters. Xeltek lists the SA series for its 48-pin-driver SuperPro programmers: the SuperPro 610P and 611S, and older models including the SuperPro M, 601S, 600P, 501S, 500P, 3000U, 580U and 280U. The SuperPro 6000 and 6000E are not on that list: Xeltek assigns them to its CX adapter series. Of the programmers we sell, the SuperPro M is the one that takes SA adapters.
That makes the SA001A the PLCC20 adapter to buy if Device Search names it for your part and your bench runs one of those SA-series programmers, including a low-cost socketed station around the SuperPro M.
Confirm the Variant Before You Order
Xeltek lists two further versions for the same PLCC20 package, the SA001A-B2001 and SA001A-B3001. Xeltek's Device Search returns the programmer and adapter for a device part number. Run your device through it first, or send us the part number and programmer model and we will check it for you.
Specifications
| Package | PLCC20 |
|---|---|
| Pin count | 20 |
| Socket style | Opentop |
| Body size | 9 x 9 mm |
| Pitch | 1.27 mm |
| Adapter series | Xeltek SA |
Limitations
- Not listed by Xeltek for the SuperPro 6000 or 6000E, which take CX-series adapters.
- Socket programming only. For soldered devices, use an in-system route such as the SuperPro IS01.
- Xeltek publishes no device list on the adapter page. Device support is confirmed per part through Device Search.
Xeltek PLCC Adapters Compared
| Adapter | Package | Socket style | Price |
|---|---|---|---|
| SA001A (this adapter) | PLCC20 | Opentop | £125.40 |
| SA008A | PLCC28 | Cover | £125.40 |
| SA015A1T | PLCC32 | Opentop | £125.40 |
| SA244 | PLCC44 | Opentop | £125.40 |
| S414T | 68-pin PLCC (our listing) | Not published | £125.40 |
Typical Applications
Socketed programming and read-back of 20-pin PLCC parts on a SuperPro 610P or 611S that is still in service. Building a small socket kit for a SuperPro M (£137.50) alongside the larger PLCC adapters above. It suits repair benches and engineering labs that handle PLCC20 parts in low volume.
Order the SA001A from £125.40 ex VAT. Send us your device part number and programmer model and we will confirm the adapter before you buy. See the full Xeltek range.
Frequently Asked Questions
Does the SA001A Fit the SuperPro 6000 or 6000E?
Xeltek does not list it for them. Xeltek's compatibility chart assigns SA adapters to its 48-pin-driver programmers, the SuperPro 610P and 611S and older models including the SuperPro M, and assigns the SuperPro 6000 and 6000E to CX adapters.
What Is the Difference Between SA001A, SA001A-B2001 and SA001A-B3001?
Xeltek lists all three as PLCC20 opentop adapters with the same 9 x 9 mm body and 1.27 mm pitch. Xeltek's Device Search returns the programmer and adapter for a device part number: the SuperPro M device list, for example, names the SA001A-B2001 for its PLCC20 parts. Check there or send us the part number before ordering.
What Body Size Does the SA001A Accept?
A 9 x 9 mm PLCC20 body at 1.27 mm pitch, per Xeltek's product page.