The SEGGER STDC 14 Adapter (8.06.39) enables seamless connection of J-Link and Flasher debug probes to targets featuring STMicroelectronics' 14-pin STDC connector. This passive adapter converts the standard 20-pin 0.1" J-Link connector to the compact 14-pin 0.05" STDC format, maintaining full compatibility with JTAG, SWD, and SWO debugging protocols.
Measuring just 25 x 25 x 11mm, the adapter provides direct electrical connectivity without active components, ensuring reliable signal integrity for Cortex-M and ARM7/9/11-based targets. The included 14-pin ribbon cable allows flexible routing to target systems whilst maintaining the sturdy construction required for repeated development use.
Compatible with the entire SEGGER ecosystem including J-Link Pro, Flasher ARM, and Tag-Connect STDC14 cables, this adapter expands debugging capabilities across STM32 evaluation boards and custom designs using the STDC14 standard.
- key_feature_2: Compatible with all J-Link and Flasher probes
- key_feature_2_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Works with J-Link Pro, BASE, ULTRA+, WiFi and all Flasher models for universal compatibility"}]}]}
- key_feature_3: Supports JTAG, SWD and SWO protocols
- key_feature_3_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Full debugging protocol support including Serial Wire Viewer trace capabilities"}]}]}
- key_feature_4: Passive design with no active components
- key_feature_4_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Direct electrical connectivity ensures signal integrity without power requirements."}]}]}
- key_feature_5: Compact 25 x 25 x 11mm form factor
- key_feature_5_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Small footprint allows integration into tight debugging setups without bulk"}]}]}
- key_feature_6: Includes 14-pin ribbon cable
- key_feature_6_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Flexible cable routing to target systems with reliable IDC connections"}]}]}
- key_feature_7: STMicroelectronics STDC14 standard compliant
- key_feature_7_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Adheres to official 14-pin 0.05\" connector specification from STMicroelectronics"}]}]}
- key_feature_8_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Built to withstand frequent connections in development and production environments"}]}]}
- key_feature_8: Durable construction for repeated use
- why_people_choose_3_title: Professional Signal Integrity
- why_people_choose_2_title: Cost-Effective Probe Extension
- why_people_choose_1_title: STM32 Development Compatibility
- why_people_choose_1: Essential for debugging STM32 boards with STDC14 connectors using existing J-Link probes
- why_people_choose_3: Passive design maintains clean debug signals for reliable development and production debugging
- why_people_choose_2: Extends expensive J-Link investment to new connector standards without buying additional hardware
- 1569542: What J-Link models are compatible with the STDC 14 Adapter?***SIMP***The adapter works with all J-Link models including J-Link Pro PoE, Pro, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, and BASE Compact. It's also compatible with all Flasher models.
- 1569544: Does the STDC 14 Adapter support SWO trace functionality?***SIMP***Yes, the adapter fully supports Serial Wire Output (SWO) for trace debugging alongside standard JTAG and SWD protocols, maintaining all debugging capabilities of the connected J-Link probe.
- 1569546: Can I use Tag-Connect cables with this adapter?***SIMP***Absolutely. The adapter is compatible with Tag-Connect STDC14 cables like the TC2030-CTX-STDC14, allowing connection to Tag-Connect footprints on target boards through the STDC14 interface.
- 1569547: What's the difference between the STDC14 and standard ARM 10-pin connectors?***SIMP***STDC14 uses 14 pins at 0.05" pitch versus 10 pins at 0.05" pitch for standard ARM Cortex connectors. Pins 3-12 match the ARM10 pinout, with pins 1-2 reserved and pins 13-14 providing UART signals for Virtual COM port functionality.
- 1569549: Is any external power required for the adapter?***SIMP***No, this is a passive adapter requiring no external power. It provides direct electrical connectivity between the 20-pin J-Link connector and 14-pin STDC connector without any active components.
- 1569550: What cable length is included with the adapter?***SIMP***The adapter includes a 14-pin ribbon cable. The cable provides flexible routing between the adapter and target system.
- 1569551: Can this adapter work with non-STMicroelectronics targets?***SIMP***While designed for STMicroelectronics' STDC14 standard, the adapter will work with any target using the same 14-pin 0.05" connector pinout and electrical specifications.
- 1569552: Does the adapter affect debugging performance or speed?***SIMP***No, as a passive adapter it maintains the full debugging performance of the connected J-Link probe, including maximum download speeds up to 4.0 MB/s depending on the J-Link model used.
- 1569553: How does STDC14 compare to other debug connector options?***SIMP***STDC14 offers more functionality than standard 10-pin ARM connectors by adding UART signals for Virtual COM port, whilst maintaining the same core debugging pins (3-12) as the ARM10 standard.
- 1569554: What's included in the STDC 14 Adapter package?***SIMP***The package includes the STDC 14 Adapter PCB and a 14-pin ribbon cable with IDC connectors. No additional cables or accessories are required for basic operation with J-Link probes.