# Title: Secure SOIC Click Board™


## Description: How Does The Secure SOIC Click Board™ Work? The Secure SOIC Click Board™ is designed with support for CryptoAuthentication™ devices from Microchip in mind. These CryptoAuthentication™ devices are equipped with many different features, such as EEPROM array, certificates, consumption logging, security configurations and other types of secure data. Secure SOIC click, supports the SPI, I2C, and SWI communication interfaces with a flexibility that allows use in various security applications, including Network/IoT Node Endpoint Security, Secure Boot, Small Message Encryption, Key Generation for Software Download, Ecosystem control, Anti Counterfeiting and similar. However, the Secure SOIC Click Board™ is designed in a way that every IC from the CryptoAuthentication™ family from Microchip is fully supported with all of its features. Due to many different ICs and possibilities supported, the only way for achieving such a goal was to use the 8-positions DIP switch. That way, user is able to select the communication lines routed the way it is required for any application. Three communication protocols are supported: I2C, SPI, and SWI (Single-Wire Interface), simply by selecting the appropriate switches, according to the table on the back of the click board™. Besides that, Secure SOIC click also have the onboard intrusion switch and external power supply solder pads, which is needed when it comes to OTP. Many ICs from the CryptoAuthentication™ family supports the parasitic power supply. With that in mind, this click board™ also has a power supply mode selection jumper, marked as PWR MODE. When the jumper is removed, the IC is powered only via the data lines (parasitic power supply mode). When the jumper is in its place, normal power operation is being used. The Secure SOIC click has all needed capacitors and the diode, needed for parasitic power supply mode, while the communication lines are pulled high by carefully calculated resistors, to achieve the best results when the parasitic power is used. However, depending on the application and implementation, user might need to change some of these values. The chips themselves uses a minimal number of pins; However, the Secure SOIC Click Board™ uses all of the UART (used for SWI communication), I2C, and SPI pins available on the mikroBUS™. That is due to many different ICs, communications, and therefore, combinations and use scenarios. The voltage range which can be used to power up the Secure SOIC Click Board™, allows for it to work with both 3.3V and 5V capable MCUs. It can be selected by soldering a small SMD jumper, labeled as VCC SEL to the correct position. SPECIFICATIONS Type Encryption Applications Used for developing various applications, such as storage of up to 16 keys, certificates, miscellaneous read/write, read-only or secret data, consumption logging, and security configurations On-board modules OTS-8(16)-1.27-03, an universal cocket for 8-pin SOIC packaged integrated Key Features Supported I2C, SPI, and the SWI interfaces, parasitic power supply, external voltage supply for OTP, good flexibility. Interface I2C,SWI,SPI,GPIO Compatibility mikroBUS Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V or 5V PINOUT DIAGRAM This table shows how the pinout on Secure SOIC click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 NC NC 2 RST INT 15 GP General Purpose Input/Output Chip Select CS 3 CS RX 14 TX SWI Line SPI Clock SCK 4 SCK TX 13 RX SWI Line SPI Data Out SDO 5 MISO SCL 12 SCL I2C Clock SPI Data In SDI 6 MOSI SDA 11 SDA I2C Data Power Supply 3.3V 7 3.3V 5V 10 5V Power Supply Ground GND 8 GND GND 9 GND Ground ONBOARD SETTINGS AND INDICATORS Label Name Default Description LD1 PWR LED - Power LED Indicator JP1 VCC SEL Left Power supply voltage selection, left position 3V3, right position 5V SW1 DIP Switch - I2C / SPI / SWI communication selection switch DIP SWITCH CONFIGURATION TABLE S1 S2 S3 S4 S5 S6 S7 S8 SPI ON OFF ON OFF OFF OFF OFF ON I2C OFF ON OFF ON OFF OFF ON OFF SWI OFF OFF OFF OFF ON ON ON OFF


## Product type: Click Board


## Vendor: Mikroelektronika d.o.o.


## Tags: Click Board, Encrypt, MikroE, Misc, Security


## Price range: 40.6 - 40.6 GBP


## Link: https://thedebugstore.com/products/mikroe-3788-secure-soic-click-board-uk


## Compare-at price range: 58.0 - 58.0 GBP


## Options 

- Title: Default Title


## Collections

- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Miscellaneous Click Boards™](https://thedebugstore.com/a/llms/collections/miscellaneous-click-boards-catalogue)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [Security Click Boards™](https://thedebugstore.com/a/llms/collections/security-click-boards-catalogue)
- [Encryption Click Boards™](https://thedebugstore.com/a/llms/collections/encryption-click-boards-catalogue)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)

## Variants

- Default Title, SKU: MIKROE-3788, Available: yes, Inventory: 1


## Metafields 

- full_description: <h3>How Does The Secure SOIC Click Board™ Work?</h3>

<p>The <strong>Secure SOIC Click Board™</strong> is designed with support for CryptoAuthentication™ devices from Microchip in mind. These CryptoAuthentication™ devices are equipped with many different features, such as EEPROM array, certificates, consumption logging, security configurations and other types of secure data. Secure SOIC click, supports the SPI, I2C, and SWI communication interfaces with a flexibility that allows use in various security applications, including Network/IoT Node Endpoint Security, Secure Boot, Small Message Encryption, Key Generation for Software Download, Ecosystem control, Anti Counterfeiting and similar.</p>

<p><img alt="Shop Click Boards Miscellaneous Secure SOIC Click" class="fr-fic fr-dii" data-entity-type="" data-entity-uuid="" src="https://www.mikroe.com/img/images/secure-soic-click-inner-img.jpg" /></p>

<p>However, the <strong>Secure SOIC Click Board™</strong> is designed in a way that every IC from the CryptoAuthentication™ family from Microchip is fully supported with all of its features. Due to many different ICs and possibilities supported, the only way for achieving such a goal was to use the 8-positions DIP switch. That way, user is able to select the communication lines routed the way it is required for any application.</p>

<p>Three communication protocols are supported: I2C, SPI, and SWI (Single-Wire Interface), simply by selecting the appropriate switches, according to the table on the back of the click board™. Besides that, Secure SOIC click also have the onboard intrusion switch and external power supply solder pads, which is needed when it comes to OTP.</p>

<p>Many ICs from the CryptoAuthentication™ family supports the parasitic power supply. With that in mind, this click board™ also has a power supply mode selection jumper, marked as PWR MODE. When the jumper is removed, the IC is powered only via the data lines (parasitic power supply mode). When the jumper is in its place, normal power operation is being used. The Secure SOIC click has all needed capacitors and the diode, needed for parasitic power supply mode, while the communication lines are pulled high by carefully calculated resistors, to achieve the best results when the parasitic power is used. However, depending on the application and implementation, user might need to change some of these values.</p>

<p>The chips themselves uses a minimal number of pins; However, the <strong>Secure SOIC Click Board™</strong> uses all of the UART (used for SWI communication), I2C, and SPI pins available on the mikroBUS™. That is due to many different ICs, communications, and therefore, combinations and use scenarios.</p>

<p>The voltage range which can be used to power up the <strong>Secure SOIC Click Board™</strong>, allows for it to work with both 3.3V and 5V capable MCUs. It can be selected by soldering a small SMD jumper, labeled as VCC SEL to the correct position.</p>

<h3>SPECIFICATIONS</h3>

<table class="specification-table-gray">
    <tbody>
        <tr class="odd">
            <td>Type</td>
            <td>Encryption</td>
        </tr>
        <tr class="even">
            <td>Applications</td>
            <td>Used for developing various applications, such as storage of up to 16 keys, certificates, miscellaneous read/write, read-only or secret data, consumption logging, and security configurations</td>
        </tr>
        <tr class="odd">
            <td>On-board modules</td>
            <td>OTS-8(16)-1.27-03, an universal cocket for 8-pin SOIC packaged integrated</td>
        </tr>
        <tr class="even">
            <td>Key Features</td>
            <td>Supported I2C, SPI, and the SWI interfaces, parasitic power supply, external voltage supply for OTP, good flexibility.</td>
        </tr>
        <tr class="odd">
            <td>Interface</td>
            <td>I2C,SWI,SPI,GPIO</td>
        </tr>
        <tr class="even">
            <td>Compatibility</td>
            <td>mikroBUS</td>
        </tr>
        <tr class="odd">
            <td>Click board size</td>
            <td>L (57.15 x 25.4 mm)</td>
        </tr>
        <tr class="even">
            <td>Input Voltage</td>
            <td>3.3V or 5V</td>
        </tr>
    </tbody>
</table>

<p> </p>

<h3 class="section-title">PINOUT DIAGRAM</h3>

<p>This table shows how the pinout on Secure SOIC click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).</p>

<table class="pinout-diagram-gray" width="549">
    <thead>
        <tr>
            <th>Notes</th>
            <th>Pin</th>
            <th colspan="4"><img alt="Mikrobus logo.png" class="fr-fic fr-dii" data-entity-type="" data-entity-uuid="" src="https://cdn.shopify.com/s/files/1/0522/6931/8333/files/mikroBUS-logo-black_1.png?v=1628760408" /></th>
            <th>Pin</th>
            <th>Notes</th>
        </tr>
    </thead>
    <tbody>
        <tr>
            <td> </td>
            <td>NC</td>
            <td>1</td>
            <td>AN</td>
            <td>PWM</td>
            <td>16</td>
            <td>NC</td>
            <td> </td>
        </tr>
        <tr>
            <td> </td>
            <td>NC</td>
            <td>2</td>
            <td>RST</td>
            <td>INT</td>
            <td>15</td>
            <td><strong>GP</strong></td>
            <td>General Purpose Input/Output</td>
        </tr>
        <tr>
            <td>Chip Select</td>
            <td><strong>CS</strong></td>
            <td>3</td>
            <td>CS</td>
            <td>RX</td>
            <td>14</td>
            <td><strong>TX</strong></td>
            <td>SWI Line</td>
        </tr>
        <tr>
            <td>SPI Clock</td>
            <td><strong>SCK</strong></td>
            <td>4</td>
            <td>SCK</td>
            <td>TX</td>
            <td>13</td>
            <td><strong>RX</strong></td>
            <td>SWI Line</td>
        </tr>
        <tr>
            <td>SPI Data Out</td>
            <td><strong>SDO</strong></td>
            <td>5</td>
            <td>MISO</td>
            <td>SCL</td>
            <td>12</td>
            <td><strong>SCL</strong></td>
            <td>I2C Clock</td>
        </tr>
        <tr>
            <td>SPI Data In</td>
            <td><strong>SDI</strong></td>
            <td>6</td>
            <td>MOSI</td>
            <td>SDA</td>
            <td>11</td>
            <td><strong>SDA</strong></td>
            <td>I2C Data</td>
        </tr>
        <tr>
            <td>Power Supply</td>
            <td><strong>3.3V</strong></td>
            <td>7</td>
            <td>3.3V</td>
            <td>5V</td>
            <td>10</td>
            <td><strong>5V</strong></td>
            <td>Power Supply</td>
        </tr>
        <tr>
            <td>Ground</td>
            <td><strong>GND</strong></td>
            <td>8</td>
            <td>GND</td>
            <td>GND</td>
            <td>9</td>
            <td><strong>GND</strong></td>
            <td>Ground</td>
        </tr>
    </tbody>
</table>

<h3 class="section-title">ONBOARD SETTINGS AND INDICATORS</h3>

<table class="additional-info-tables-gray">
    <thead>
        <tr>
            <th>Label</th>
            <th>Name</th>
            <th>Default</th>
            <th> Description</th>
        </tr>
    </thead>
    <tbody>
        <tr>
            <td>LD1</td>
            <td>PWR LED</td>
            <td>-</td>
            <td>Power LED Indicator</td>
        </tr>
        <tr>
            <td>JP1</td>
            <td>VCC SEL</td>
            <td>Left</td>
            <td>Power supply voltage selection, left position 3V3, right position 5V</td>
        </tr>
        <tr>
            <td>SW1</td>
            <td>DIP Switch</td>
            <td>-</td>
            <td>I2C / SPI / SWI communication selection switch</td>
        </tr>
    </tbody>
</table>

<h3 class="section-title">DIP SWITCH CONFIGURATION TABLE</h3>

<table class="table table-bordered">
    <thead>
        <tr>
            <th scope="col"> </th>
            <th scope="col">S1</th>
            <th scope="col">S2</th>
            <th scope="col">S3</th>
            <th scope="col">S4</th>
            <th scope="col">S5</th>
            <th scope="col">S6</th>
            <th scope="col">S7</th>
            <th scope="col">S8</th>
        </tr>
    </thead>
    <tbody>
        <tr>
            <th scope="row">SPI</th>
            <td>ON</td>
            <td>OFF</td>
            <td>ON</td>
            <td>OFF</td>
            <td>OFF</td>
            <td>OFF</td>
            <td>OFF</td>
            <td>ON</td>
        </tr>
        <tr>
            <th scope="row">I2C</th>
            <td>OFF</td>
            <td>ON</td>
            <td>OFF</td>
            <td>ON</td>
            <td>OFF</td>
            <td>OFF</td>
            <td>ON</td>
            <td>OFF</td>
        </tr>
        <tr>
            <th scope="row">SWI</th>
            <td>OFF</td>
            <td>OFF</td>
            <td>OFF</td>
            <td>OFF</td>
            <td>ON</td>
            <td>ON</td>
            <td>ON</td>
            <td>OFF</td>
        </tr>
    </tbody>
</table>

<h3> </h3>

- description_tag: The Secure SOIC Click Board™ is a universal, socket-based click board, specifically designed for the Microchip CryptoAuthentication™ devices in an 8-pin SOIC package. Available from The DebugStore UK.
- title_tag: MikroE Secure SOIC Click Board™ (MIKROE-3788)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- amazon_enable: TRUE
- amazon_title: Secure SOIC Click Board
- amazon_product_type: computercomponent
- amazon_block: FALSE
- amazon_prime_enable: FALSE
- amazon_search: MikroElektronika Microelectronica MIKROE-1100
- amazon_uk_price: 34.32
- amazon_uk_currency: GBP
- amazon_de_currency: EUR
- amazon_de_price: 38.7816
- amazon_fr_currency: EUR
- amazon_fr_price: 38.7816
- amazon_es_currency: EUR
- amazon_es_price: 38.7816
- amazon_nl_currency: EUR
- amazon_nl_price: 38.7816
- amazon_it_currency: EUR
- amazon_it_price: 38.7816
- amazon_se_curency: SEK
- amazon_se_price: 391.248
- amazon_product_id: 8606018719884
- amazon_product_id_type: EAN
- amazon_update: Update
- amazon_short_description: The Secure SOIC Click Board™ is universal, socket based click board, specifically designed for the Microchip CryptoAuthentication™ devices in an 8-pin SOIC package. This click board™ supports the SPI, I2C, and the SWI interface based ICs from the CryptoAuthentication™ family with a flexible command set, that allows use in various security applications, including Network/IoT Node Endpoint Security, Secure Boot, Small Message Encryption, Key Generation for Software Download, Ecosystem control, Anti Counterfeiting and similar.Secure SOIC click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.The Secure SOIC click comes with 3 ICs ATSHA204A included in the package.
- amazon_long_description: <p>Secure SOIC Click Board™</p>
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-secure-soic-click-3788-front_1.jpg
- amazon_other_image_1: https://www.thedebugstore.com/images/product/lg-secure-soic-click-3788-back_1.jpg
- amazon_other_image_2: https://www.thedebugstore.com/images/product/lg-secure-soic-click-3788-fusion_1.jpg
- amazon_other_image_3: https://www.thedebugstore.com/images/product/lg-secure-soic-click-3788-shuttle_1.jpg
- amazon_other_image_4: https://www.thedebugstore.com/images/product/lg-secure-soic-click-3788-clicker_1.jpg
- amazon_other_image_5: https://www.thedebugstore.com/images/product/lg-secure-soic-click-3788-breadboard_1.jpg
- amazon_other_image_6: https://www.thedebugstore.com/images/product/lg-secure-soic-click-3788-breadboard_1.jpg
- amazon_browse_node: 428655031
- mpn: MIKROE-3788
- backorder_label: If no stock shown above, check availability
- google_product_category: 2082
- attachments: [{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/46e7ef7d5c25--secure-soic-click-schematic-v100-1-0f024a.pdf?v=1635670664\">Secure SOIC Click Board™ Schematic</a>"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/46e7ef7d5c25--ATSHA204A-Data-Sheet-40002025A-3-54c708.pdf?v=1635670705\">Microchip ATSHA204A CryptoAuthentication™ Device Datasheet</a>"}],"download_filetype":[{"download_filetype":"pdf"}]}]
- condition: new
- custom_product: false
- mpn: MIKROE-3788
- google_product_category: Electronics
- custom_label_0: Click Board
- examples: 

<p>We provide libraries for all click boards in the Secure family on our&nbsp;LibStock&nbsp;page, as well as a demo application (example), developed using MikroElektronika&nbsp;compilers. The demo can run on all the main MikroElektronika&nbsp;development boards. However, due to many different ICs compatible with Secure SOIC click, the existing libraries from the other Secure family click boards may be used.</p>

<p>The&nbsp;<strong>Secure SOIC Click Board™</strong> comes with three&nbsp; ATSHA204A ICs included in the package.</p>

<p>For more information about the individual integrated circuits, features, libraries and examples, visit the desired web page, linked below, depending of the chip being used:</p>

<ul>
	<li>ATSHA204A-SSHCZ-T - used on&nbsp;<a href="https://thedebugstore.com/products/secure-6-click-board-mikroe-3699" title="Secure 6 Click Board™">Secure 6 Click</a>&nbsp;Board™</li>
</ul>

<h3>Additional Notes and Information</h3>

<p>Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.</p>

- device_vendor: Microchip Technology
- device_type: ATECC608B-SSHDA-T, ATSHA204A-MAHCZ-T
- warranty: 12 months
- brand: MikroE
- manufacturer: Mikroelektronika d.o.o.
- badge: <div style='display:none' class='jdgm-prev-badge' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <span class='jdgm-prev-badge__stars' data-score='0.00' tabindex='0' aria-label='0.00 stars' role='button'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </span> <span class='jdgm-prev-badge__text'> No reviews </span> </div>
- widget: <div class='jdgm-rev-widg' data-updated-at='2024-08-09T02:54:17Z' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <style class='jdgm-temp-hiding-style'>.jdgm-rev-widg{ display: none }</style> <div class='jdgm-rev-widg__header'> <h2 class='jdgm-rev-widg__title'>Customer Reviews</h2>  <div class='jdgm-rev-widg__summary'> <div class='jdgm-rev-widg__summary-stars' aria-label='Average rating is 0.00 stars' role='img'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </div> <div class='jdgm-rev-widg__summary-text'>Be the first to write a review</div> </div> <a style='display: none' href='#' class='jdgm-write-rev-link' role='button'>Write a review</a> <div class='jdgm-histogram jdgm-temp-hidden'>  <div class='jdgm-histogram__row' data-rating='5' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 5 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='4' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 4 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='3' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 3 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='2' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 2 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='1' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 1 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row jdgm-histogram__clear-filter' data-rating=null tabindex='0'></div> </div>     <div class='jdgm-rev-widg__sort-wrapper'></div> </div> <div class='jdgm-rev-widg__body'> <div class='jdgm-rev-widg__reviews'></div> <div class='jdgm-paginate' data-per-page='5' data-url='https://judge.me/reviews/reviews_for_widget'></div> </div> <div class='jdgm-rev-widg__paginate-spinner-wrapper'> <div class='jdgm-spinner'></div> </div> </div>
- target_keyword: Secure SOIC Click Board
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/272752836797"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"heading","level":3,"children":[{"type":"text","value":"How Does The Secure SOIC Click Board™ Work?"}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"Secure SOIC Click Board™","bold":true},{"type":"text","value":" is designed with support for CryptoAuthentication™ devices from Microchip in mind. These CryptoAuthentication™ devices are equipped with many different features, such as EEPROM array, certificates, consumption logging, security configurations and other types of secure data. Secure SOIC click, supports the SPI, I2C, and SWI communication interfaces with a flexibility that allows use in various security applications, including Network/IoT Node Endpoint Security, Secure Boot, Small Message Encryption, Key Generation for Software Download, Ecosystem control, Anti Counterfeiting and similar."}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"paragraph","children":[{"type":"text","value":"However, the "},{"type":"text","value":"Secure SOIC Click Board™","bold":true},{"type":"text","value":" is designed in a way that every IC from the CryptoAuthentication™ family from Microchip is fully supported with all of its features. Due to many different ICs and possibilities supported, the only way for achieving such a goal was to use the 8-positions DIP switch. That way, user is able to select the communication lines routed the way it is required for any application."}]},{"type":"paragraph","children":[{"type":"text","value":"Three communication protocols are supported: I2C, SPI, and SWI (Single-Wire Interface), simply by selecting the appropriate switches, according to the table on the back of the click board™. Besides that, Secure SOIC click also have the onboard intrusion switch and external power supply solder pads, which is needed when it comes to OTP."}]},{"type":"paragraph","children":[{"type":"text","value":"Many ICs from the CryptoAuthentication™ family supports the parasitic power supply. With that in mind, this click board™ also has a power supply mode selection jumper, marked as PWR MODE. When the jumper is removed, the IC is powered only via the data lines (parasitic power supply mode). When the jumper is in its place, normal power operation is being used. The Secure SOIC click has all needed capacitors and the diode, needed for parasitic power supply mode, while the communication lines are pulled high by carefully calculated resistors, to achieve the best results when the parasitic power is used. However, depending on the application and implementation, user might need to change some of these values."}]},{"type":"paragraph","children":[{"type":"text","value":"The chips themselves uses a minimal number of pins; However, the "},{"type":"text","value":"Secure SOIC Click Board™","bold":true},{"type":"text","value":" uses all of the UART (used for SWI communication), I2C, and SPI pins available on the mikroBUS™. That is due to many different ICs, communications, and therefore, combinations and use scenarios."}]},{"type":"paragraph","children":[{"type":"text","value":"The voltage range which can be used to power up the "},{"type":"text","value":"Secure SOIC Click Board™","bold":true},{"type":"text","value":", allows for it to work with both 3.3V and 5V capable MCUs. It can be selected by soldering a small SMD jumper, labeled as VCC SEL to the correct position."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nEncryption\nApplications\nUsed for developing various applications, such as storage of up to 16 keys, certificates, miscellaneous read/write, read-only or secret data, consumption logging, and security configurations\nOn-board modules\nOTS-8(16)-1.27-03, an universal cocket for 8-pin SOIC packaged integrated\nKey Features\nSupported I2C, SPI, and the SWI interfaces, parasitic power supply, external voltage supply for OTP, good flexibility.\nInterface\nI2C,SWI,SPI,GPIO\nCompatibility\nmikroBUS\nClick board size\nL (57.15 x 25.4 mm)\nInput Voltage\n3.3V or 5V"}]},{"type":"paragraph","children":[{"type":"text","value":" "}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout on Secure SOIC click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nNC\n1\nAN\nPWM\n16\nNC\nNC\n2\nRST\nINT\n15\nGP\nGeneral Purpose Input/Output\nChip Select\nCS\n3\nCS\nRX\n14\nTX\nSWI Line\nSPI Clock\nSCK\n4\nSCK\nTX\n13\nRX\nSWI Line\nSPI Data Out\nSDO\n5\nMISO\nSCL\n12\nSCL\nI2C Clock\nSPI Data In\nSDI\n6\nMOSI\nSDA\n11\nSDA\nI2C Data\nPower Supply\n3.3V\n7\n3.3V\n5V\n10\n5V\nPower Supply\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"ONBOARD SETTINGS AND INDICATORS"}]},{"type":"paragraph","children":[{"type":"text","value":"Label\nName\nDefault\n Description\nLD1\nPWR LED\n-\nPower LED Indicator\nJP1\nVCC SEL\nLeft\nPower supply voltage selection, left position 3V3, right position 5V\nSW1\nDIP Switch\n-\nI2C / SPI / SWI communication selection switch"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"DIP SWITCH CONFIGURATION TABLE"}]},{"type":"paragraph","children":[{"type":"text","value":"S1\nS2\nS3\nS4\nS5\nS6\nS7\nS8\nSPI\nON\nOFF\nON\nOFF\nOFF\nOFF\nOFF\nON\nI2C\nOFF\nON\nOFF\nON\nOFF\nOFF\nON\nOFF\nSWI\nOFF\nOFF\nOFF\nOFF\nON\nON\nON\nOFF"}]},{"type":"heading","level":3,"children":[{"type":"text","value":" "}]}]}
- summary: <p>The <em><strong>Secure SOIC Click Board™</strong> </em>is a universal, socket-based click board, specifically designed for the Microchip CryptoAuthentication™ devices in an 8-pin SOIC package. This click board™ supports the SPI, I2C, and the SWI interface based ICs from the CryptoAuthentication™ family with a flexible command set, that allows use in various security applications, including Network/IoT Node Endpoint Security, Secure Boot, Small Message Encryption, Key Generation for Software Download, Ecosystem control, Anti Counterfeiting and similar.</p>
<p>The<strong> Secure SOIC Click Board™</strong> is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click Board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.</p>
<p><strong>Note:</strong> The <strong>Secure SOIC Click Board</strong> is supp[lied with three ATSHA204A devices.</p>