Dediprog ADP-SF600-254-TO-127-CB adapts the SF600/SF600Plus-G2 programmer’s 2×10 2.54 mm header to a compact 2×10 1.27 mm header for in-system programming (ISP). Supplied with an 8 cm 1.27 mm ribbon cable, it provides a direct, one-to-one mapping of SF600 signals (including CS1/CS2 and DQ0–DQ3) to targets that use a 1.27 mm footprint, reducing board space and simplifying fixture design.
The adapter is part of the Dediprog SF600 ecosystem and complements accessories such as the SF600Plus-G2 programmer, the SF600-ISO-Board-2 isolation board, and ISP adaptors like ISP-SPIxIIC. For SF100 users, see the compact ISP-UADP-127 universal adaptor. These options support engineering and production workflows across SPI NOR/NAND devices.
Why consider it? If your target PCB standardises on 1.27 mm 20-pin ISP headers, this adapter keeps your SF600-series hardware and cabling unchanged while matching the finer pitch on board—lowering risk, preserving signal integrity, and avoiding ad-hoc cabling.
- key_feature_2: Native SF600 Series Compatibility - key_feature_2_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Works directly with SF600/SF600Plus-G2 ISP pinout, carrying CS1/CS2, DQ0–DQ3 and control lines without remapping, so engineering setups remain consistent from bring-up to production while avoiding wiring mistakes that cause intermittent programming failures."}]}]} - key_feature_3: 20-Pin 2.54 mm to 1.27 mm - key_feature_3_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Converts standard 0.1-inch dual-row to compact 0.05-inch dual-row, letting you keep proven programmer hardware while meeting target boards that use dense 1.27 mm footprints for space-constrained designs."}]}]} - key_feature_4: One-to-One Signal Mapping - key_feature_4_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Maintains a straight mapping of SPI/IO pins to the 1.27 mm header; no inversion or cross-over pairs, simplifying verification and reducing time spent chasing pinout mismatches during board bring-up."}]}]} - key_feature_5: Included 1.27 mm Ribbon Cable (8 cm) - key_feature_5_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Ships with a short, keyed 1.27 mm cable to minimise loop area and crosstalk on high-speed SPI lines, improving robustness versus improvised jumpers in test fixtures and production environments"}]}]} - key_feature_6: Compact, Fixture-Friendly Form Factor - key_feature_6_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Small adapter and micro-pitch cable ease access in crowded DUT areas and inside enclosures, useful when targets expose only fine-pitch ISP headers to save PCB area."}]}]} - key_feature_7: Part Of A Complete ISP Ecosystem - key_feature_7_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Integrates with Dediprog isolation boards, test clips, and ISP adaptors so teams can standardise on one toolchain from lab development to EMS lines, reducing training and inventory overheads."}]}]} - key_feature_8_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Designed for SF600-series programmers widely used for SPI NOR and NAND updates; leverages mature software/manuals/app notes to accelerate setup and troubleshooting in real projects."}]}]} - key_feature_8: Proven With SPI NOR/NAND Workflows - why_people_choose_3_title: Ecosystem & Documentation - why_people_choose_2_title: Space-Saving Target Connection - why_people_choose_1_title: Drop-In For SF600 Pinout - why_people_choose_1: Directly matches SF600-series 20-pin ISP header, avoiding custom wiring looms and reducing bring-up errors in the lab and on the lin - why_people_choose_3: Part of a well-documented toolchain with current manuals, FAQs and app notes to speed installation, training and support. - why_people_choose_2: Supports compact 1.27 mm 20-pin headers on the DUT, preserving board real estate without sacrificing full SPI signal access. - 1568924: What programmers is this adapter for?***SIMP***It’s designed for Dediprog SF600 series, including the SF600Plus-G2. See the programmer on Debug Store. - 1568925: Does it change the SF600 pinout?***SIMP***No, signals are passed straight through to a 2×10 1.27 mm header (CS1/CS2, DQ0–DQ3, etc.). - 1568927: Is a 1.27 mm cable included?***SIMP***Yes—an 8 cm 1.27 mm dual-row ribbon cable with keyed female header is included. - 1568928: Can I use it for both SPI NOR and SPI NAND targets?***SIMP***Yes; the adapter carries the SF600 series signals used by Dediprog’s SPI NOR/NAND workflows. Functionality depends on the programmer and target device support. - 1568929: Is there isolation to improve boot behaviour on motherboards?***SIMP***Isolation isn’t part of this adapter. If attachment affects DUT boot, use the SF600-ISO-Board-2. - 1568930: How does this differ from 20-to-10 ‘SWD’ adapters?***SIMP***Those convert 20-pin to 10-pin (often for ARM SWD) and are not pin-compatible with SF600’s 20-to-20 mapping. This adapter preserves all SF600 lines on a 20-pin 1.27 mm header. - 1568931: What if my project uses SF100?***SIMP***For the SF100, consider the compact ISP-UADP-127 universal adaptor. - 1568933: Is this a good fit for dense DUT layouts?***SIMP***Yes, the 1.27 mm, 20-pin header reduces PCB footprint while retaining full signal access for robust ISP.