The EasyPULL 10K Board is an add-on board that comprises 8 pull-up/pull-down resistors. The board comes with 10K Ω resistors. A version with 1K Ω resistors is available. The pull-up or pull-down selection is done via jumpers and the selection is made by a simple jumper moving in Up and Down positions. The EasyPULL 10K Board can be used to fix an input pin to a known state if no input is present. It is ideal for protecting the input pin and fixing the input pin at a valid voltage level. It can provide voltage levels to PORT pins and is very convenient to use when pins are used as inputs, as they need to have predefined logic states. The board features an onboard IDC10 connector and extension pins that enable the user to easily connect to external electronic circuits.
Compatible with EasyLED Board, this board can be used in combination to serve the requirement in various types of applications. In this way, users can tie the device pin to VCC or GND via resistors and have a visual indication of output signals through a LED.