{"product_id":"xeltek-superpro-is01-in-system-programmer-uk","title":"Xeltek SuperPro IS01 High-Performance In-System Programmer","description":"\u003cp\u003eThe Xeltek SuperPro IS01 programs parts already soldered to the board, from firmware bring-up to end-of-line serial number writing. It supports over 10,000 serial programmable devices over I2C, SPI, UART, BDM, Microwire, JTAG, CAN and RS-232, supplies target VDD up to 5.5V at 0.5A and VPP up to 15V at 0.2A, runs from a PC over USB 2.0 or on its own from project files on an SD card, and has an optocoupler-isolated ATE port for fixtures.\u003c\/p\u003e\n\n\u003ch2\u003eIn-System Programming Over a Cable of Up to 1 m\u003c\/h2\u003e\n\u003cp\u003eAs a serial in-system programmer, the IS01 reaches targets up to 3 feet (1 m) away, with programming speed selectable in software to suit cable length and board loading. I\/O level is set in software from 1.5V to 4V. It can power a light-load target, though Xeltek recommends the board's own supply in most cases.\u003c\/p\u003e\n\u003cp\u003ePort A (10x2) carries every protocol except CAN and RS-232, including SPI, I2C, JTAG, UART, BDM and Microwire; Port B (5x2) carries CAN and RS-232.\u003c\/p\u003e\n\n\u003ch2\u003eStand-Alone Production Programming with ATE Control\u003c\/h2\u003e\n\u003cp\u003eStand-alone, the IS01 runs from its LCD, keypad and LED status indicator, loading password-protectable project files from an SD card (maximum 4GB). Each project holds the device, buffer data, configuration bits and batch sequence.\u003c\/p\u003e\n\u003cp\u003eThe optocoupler-isolated ATE interface gives fixtures six project select lines (SEL0 to SEL5), START and STOP inputs and PASS, FAIL and BUSY outputs. In mass production mode, shorting TPIN and TPOUT on the target board starts the AUTO sequence (erase, blank check, program, verify, protect) as soon as the board connects. Up to 12 programmers run from one PC through a USB hub.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware, CPLD Files and Test System Integration\u003c\/h2\u003e\n\u003cp\u003eThe Windows software adds production logs, password-locked Factory Mode, auto-increment serial numbers and automatic recognition of binary, Intel hex, Motorola S, Tektronix, JEDEC and POF files. XPlayer runs JAM, SVF and STAPL (.stp) files for Actel, Xilinx and Altera programmable logic, generated in design tools such as Quartus II or ISE, plus Actel Direct C files. An optional DLL or Virtual COM command set, and a LabVIEW driver, let ICT equipment test and program in one step.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported devices\u003c\/th\u003e\n\u003ctd\u003e10,000+ serial programmable devices\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eISP protocols\u003c\/th\u003e\n\u003ctd\u003eI2C, SPI, UART, BDM, Microwire (MW), JTAG, CAN, RS-232\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eISP ports\u003c\/th\u003e\n\u003ctd\u003ePort A 10x2 (all protocols except CAN and RS-232); Port B 5x2 (CAN, RS-232)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget VDD output\u003c\/th\u003e\n\u003ctd\u003e0V to 5.5V, 0.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVPP output\u003c\/th\u003e\n\u003ctd\u003e0V to 15V, 0.2A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eI\/O level\u003c\/th\u003e\n\u003ctd\u003e1.5V to 4V, set in software\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eISP cable reach\u003c\/th\u003e\n\u003ctd\u003eUp to 3 ft (1 m), programming speed selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePC interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 high speed; online and offline modes simultaneously\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStand-alone operation\u003c\/th\u003e\n\u003ctd\u003eLCD, keypad, LED status; project files on SD card (max 4GB)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eATE interface\u003c\/th\u003e\n\u003ctd\u003eSEL0 to SEL5, START, STOP inputs; PASS, FAIL, BUSY outputs; optocoupler isolated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMulti-programming\u003c\/th\u003e\n\u003ctd\u003eUp to 12 programmers from one PC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIntegration\u003c\/th\u003e\n\u003ctd\u003eOptional DLL or Virtual COM command set; LabVIEW driver\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower input\u003c\/th\u003e\n\u003ctd\u003e12V DC, 2A external\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eBuilt-in overcurrent protection\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e10°C to 50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (main unit)\u003c\/th\u003e\n\u003ctd\u003e137 x 87 x 45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (main unit)\u003c\/th\u003e\n\u003ctd\u003e0.34 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSoftware OS\u003c\/th\u003e\n\u003ctd\u003eWindows XP, Vista, 7, 8, 10 (32\/64-bit); Xeltek's current software listing also names Windows 11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIn-system programming only. There is no ZIP socket, so loose chips need a socket-based universal programmer such as the \u003ca href=\"\/it\/products\/superpro-6000e-universal-programmer-xeltek-uk\"\u003eSuperPro 6000E\u003c\/a\u003e or \u003ca href=\"\/it\/products\/superpro-6000-universal-programmer-xeltek-uk\"\u003eSuperPro 6000\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eCAN and RS-232 targets on Port B need the optional ISP cable type B.\u003c\/li\u003e\n  \u003cli\u003eTarget VDD is rated at 0.5A; power heavier boards from their own supply. Long or heavily loaded lines may need a lower programming speed.\u003c\/li\u003e\n  \u003cli\u003eProtocol support does not guarantee a part is in the library; check the IS01 device list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompare Xeltek SuperPro Programmers\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eTarget connection\u003c\/th\u003e\n\u003cth\u003eDevices\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSuperPro IS01\u003c\/td\u003e\n\u003ctd\u003eIn-system programmer, stand-alone or USB 2.0\u003c\/td\u003e\n\u003ctd\u003eISP cable, up to 1 m\u003c\/td\u003e\n\u003ctd\u003e10,000+ serial devices\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"xeltek-superpro-is01-in-system-programmer-uk\"\u003e£1,145.84\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/superpro-6000e-universal-programmer-xeltek-uk\"\u003eSuperPro 6000E\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal programmer, stand-alone or USB 2.0\u003c\/td\u003e\n\u003ctd\u003e144-pin driver, socket adapters\u003c\/td\u003e\n\u003ctd\u003e83,300+ devices from 299 manufacturers (Xeltek comparison sheet, October 2013)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"superpro-6000e-universal-programmer-xeltek-uk\"\u003e£880\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/superpro-6000-universal-programmer-xeltek-uk\"\u003eSuperPro 6000\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal programmer, stand-alone or USB 2.0\u003c\/td\u003e\n\u003ctd\u003e144-pin driver, socket adapters\u003c\/td\u003e\n\u003ctd\u003e89,932 devices from 322 manufacturers (Xeltek device list, 2014)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"superpro-6000-universal-programmer-xeltek-uk\"\u003e£935\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/superpro-m-low-cost-universal-programmer-xeltek-uk\"\u003eSuperPro M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal programmer, PC hosted over USB 2.0\u003c\/td\u003e\n\u003ctd\u003e48 pin drivers, socket adapters\u003c\/td\u003e\n\u003ctd\u003e20,000+ devices from 158 manufacturers\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"superpro-m-low-cost-universal-programmer-xeltek-uk\"\u003e£137.50\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eWriting a unique serial number or calibration data to an on-board I2C EEPROM after final assembly, using auto-increment. Programming soldered SPI flash and microcontrollers on a bed-of-nails fixture, with the ATE lines selecting the project from the SD card and reporting PASS or FAIL to the handler. Updating Altera MAX II CPLDs such as the EPM240 or EPM570 in circuit from a JAM file through XPlayer.\u003c\/p\u003e\n\u003cp\u003eThe IS01 suits test engineers adding programming to an ICT or functional test station, and field service teams needing a portable programmer that runs without a PC. See the full \u003ca href=\"\/it\/collections\/xeltek-programmers-catalogue\"\u003eXeltek range\u003c\/a\u003e of programmers and adapters.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuperPro IS01 programmer\u003c\/li\u003e\n  \u003cli\u003eISP cable type A (all protocols except CAN and RS-232)\u003c\/li\u003e\n  \u003cli\u003eUSB cable\u003c\/li\u003e\n  \u003cli\u003ePower adapter, 12V DC output\u003c\/li\u003e\n  \u003cli\u003eInstallation CD-ROM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDocuments: \u003ca href=\"https:\/\/files.thedebugstore.com\/xeltek\/superpro-is01\/xeltek-superpro-is01-in-system-programmer-user-manual.pdf\"\u003eSuperPro IS01 user manual\u003c\/a\u003e and \u003ca href=\"https:\/\/files.thedebugstore.com\/xeltek\/superpro-is01\/xeltek-superpro-is01-supported-device-list-other.pdf\"\u003eSuperPro IS01 supported device list\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eOrder the SuperPro IS01 from \u003cspan data-ds-price=\"xeltek-superpro-is01-in-system-programmer-uk\"\u003e£1,145.84\u003c\/span\u003e ex VAT. Send us your target part numbers for a device list check or a formal quotation. Debug Store has supplied engineers for 55+ years.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed: 30 October 2026\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.xeltek.com\/isp-programmers\/in-system-programmers-superpro-is01\/\"\u003eXeltek SuperPro IS01 In-System (ISP) Programmer\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.xeltek.com\/resources\/technical-articles\/in-system-programming\/superpro-is01-mass-production-mode\/\"\u003eXeltek: SuperPro IS01 Mass Production Mode\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.xeltek.com\/resources\/technical-articles\/in-system-programming\/using-the-ate-port-to-control-isp-programmers\/\"\u003eXeltek: Using the ATE Port to Control ISP Programmers\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.xeltek.com\/resources\/technical-articles\/in-system-programming\/xeltek-superpro-is01-isp-in-circuit-programmer-uses-xplayer-tool-to-program-cpld-chips-by-altera-and-actel\/\"\u003eXeltek: SuperPro IS01 XPlayer for Altera and Actel CPLDs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Xeltek, Inc","offers":[{"title":"Default Title","offer_id":37768320614589,"sku":"SuperPro-IS01","price":1145.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/xeltek-inc-programmer-xeltek-superpro-is01-high-performance-in-system-programmer-30219321540797.jpg?v=1685218792","url":"https:\/\/thedebugstore.com\/it\/products\/xeltek-superpro-is01-in-system-programmer-uk","provider":"Debug Store","version":"1.0","type":"link"}