{"product_id":"total-phase-promira-spi-active-level-2-analysis-application","title":"Total Phase PROMIRA SPI Analysis - Level 2 Application","description":"\u003cp\u003eThe Promira SPI Analysis Level 2 Application (TP601610) turns a Total Phase Promira Serial Platform into a non-intrusive SPI protocol analyser that monitors single-I\/O SPI at up to 40 MHz on one chip select. Total Phase describes it as the fastest SPI protocol analyser in its range. Data streams directly to the PC for decode in Data Center, so capture length is set by disk space, not a buffer.\u003c\/p\u003e\n\n\u003ch2\u003eNon-Intrusive SPI Capture to 40 MHz\u003c\/h2\u003e\n\u003cp\u003eLevel 2 raises the capture ceiling from 24 MHz to 40 MHz, which reaches SPI flash, fast ADC and display links that Level 1 and the \u003ca href=\"\/it\/products\/total-phase-tp320121-beagle-i2c-spi-analyser-uk\"\u003eBeagle I2C\/SPI\u003c\/a\u003e cannot follow. The analyser does not drive the bus, so timing at 40 MHz is the timing of the real design.\u003c\/p\u003e\n\n\u003ch2\u003eLong Captures for Intermittent Faults\u003c\/h2\u003e\n\u003cp\u003eStreaming to the PC means a session can run until the fault appears, rather than until a buffer fills. Over Gigabit Ethernet the Promira can stay with a unit in a test rack or chamber while Data Center runs on a desk PC.\u003c\/p\u003e\n\n\u003ch2\u003eNo Level 1 Licence Needed\u003c\/h2\u003e\n\u003cp\u003eUnlike the SPI Active applications, Total Phase does not list SPI Analysis Level 1 as a prerequisite for Level 2. If your bus runs above 24 MHz, Level 2 on its own covers it.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eCaptures are viewed in Total Phase Data Center, which decodes the bus in real time and saves sessions for later review. The analysis applications need Promira firmware v2.00 or later, which is installed through the Promira admin interface.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eSPI bus monitor (Analysis), non-intrusive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum capture rate\u003c\/th\u003e\n\u003ctd\u003e40 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI\/O mode\u003c\/th\u003e\n\u003ctd\u003eSingle I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChip selects monitored\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapture\u003c\/th\u003e\n\u003ctd\u003eStreamed directly to the PC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eData Center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003ePromira firmware v2.00 or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost platform\u003c\/th\u003e\n\u003ctd\u003ePromira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eTP601610\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a software licence only. It runs on the \u003ca href=\"\/it\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform\u003c\/a\u003e (\u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk\"\u003e£1,040\u003c\/span\u003e ex VAT), which is sold separately and must be in place before the licence can be installed.\u003c\/li\u003e\n\u003cli\u003eSingle I\/O and one chip select. Dual and quad SPI traffic is not decoded.\u003c\/li\u003e\n\u003cli\u003eMonitor only. To drive SPI at 40 MHz, add \u003ca href=\"\/it\/products\/tp600610-spi-active-level-2-application-total-phase-uk\"\u003eSPI Active Level 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eWe ask for your Promira serial number at checkout, as printed on the label of the unit, because we need it to process the licence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhich I2C and SPI Analyser Should You Choose?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eBeagle I2C\/SPI Analyser\u003c\/th\u003e\n\u003cth\u003ePromira I2C Analysis\u003c\/th\u003e\n\u003cth\u003ePromira SPI Analysis Level 1\u003c\/th\u003e\n\u003cth\u003ePromira SPI Analysis Level 2\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI2C capture\u003c\/th\u003e\n\u003ctd\u003eTo 4 MHz\u003c\/td\u003e\n\u003ctd\u003eTo 5 MHz at 3.3 V\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI capture\u003c\/th\u003e\n\u003ctd\u003eTo 24 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eTo 24 MHz at 3.3 V, 1 chip select\u003c\/td\u003e\n\u003ctd\u003eTo 40 MHz, 1 chip select\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost connection\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"total-phase-tp320121-beagle-i2c-spi-analyser-uk\"\u003e£400\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan data-ds-price=\"total-phase-promira-i2c-active-analysis-application\"\u003e£120\u003c\/span\u003e plus platform\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan data-ds-price=\"total-phase-promira-spi-active-level-1-analysis-application\"\u003e£120\u003c\/span\u003e plus platform\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan data-ds-price=\"total-phase-promira-spi-active-level-2-analysis-application\"\u003e£245\u003c\/span\u003e plus platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eChoose Level 2 when the SPI clock on your board is above 24 MHz. Up to 24 MHz, Level 1 costs less.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eVerifying the read sequence of a host booting from SPI NOR flash at 33 MHz. Capturing a 40 MHz ADC link to find timing-related data corruption. Long-run logging of an SPI bus in an environmental test to catch a rare fault.\u003c\/p\u003e\n\u003cp\u003eSPI Analysis Level 2 suits hardware and firmware engineers working on fast SPI links and validation teams running long soak tests.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Promira SPI Analysis Level 2 Application from \u003cspan data-ds-price=\"total-phase-promira-spi-active-level-2-analysis-application\"\u003e£245\u003c\/span\u003e ex VAT. For a formal quotation, \u003ca href=\"\/it\/pages\/contact-us\"\u003erequest a quote from our team\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 5 October 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 Total Phase pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-analysis1\/\"\u003eSPI Analysis Level 1 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-analysis2\/\"\u003eSPI Analysis Level 2 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/solutions\/video\/updating-promira-serial-platform-firmware-license\/\"\u003eUpdating Promira firmware and licences\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/beagle-i2cspi\/\"\u003eBeagle I2C\/SPI Protocol Analyzer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":55954032165239,"sku":"TP601610","price":245.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp601610-total-phase-promira-spi-active-level-2-analysis-application-1261154498.png?v=1791203832","url":"https:\/\/thedebugstore.com\/it\/products\/total-phase-promira-spi-active-level-2-analysis-application","provider":"Debug Store","version":"1.0","type":"link"}