{"product_id":"segger-5-16-02-flasher-portable-plus-programmer","title":"SEGGER Flasher Portable PLUS Programmer","description":"\u003cp\u003eThe SEGGER Flasher Portable PLUS (part number 5.16.02) is a battery-powered handheld flash programmer with a 1.8\" colour screen, 128 MB of internal flash for up to 99 firmware images, a 1.2V to 5V target interface and target interface speeds up to 50 MHz. Its rechargeable lithium-ion battery runs for up to 10 hours, so firmware can be updated in the field without a PC or mains power. It suits service technicians reflashing installed equipment and engineers who need a stand-alone programmer away from the production line.\u003c\/p\u003e\n\n\u003ch2\u003eBattery-Powered Field Service Programmer\u003c\/h2\u003e\n\u003cp\u003eSEGGER built the Portable PLUS for equipment that cannot easily be connected to a network, such as wind turbines, remote installations and industrial machinery in hard-to-reach places. When a firmware issue is found, a technician can apply the patch on site with no PC and no access to a power supply. The battery charges automatically whenever the unit is connected over USB to a host computer or a standard USB power adapter, including a phone charger or power bank; a full charge takes about 70 minutes at 1 A. The unit can also run from USB power.\u003c\/p\u003e\n\n\u003ch2\u003eColour Screen and Stored Firmware Images\u003c\/h2\u003e\n\u003cp\u003eThe 1.8\" 128 x 160 pixel RGB TFT screen gives direct feedback and access to project data. The 128 MB internal flash stores as many as 99 firmware images, so one programmer can cover several products or firmware versions on a service round. Turbo mode downloads and programs at the same time, and SEGGER quotes programming speeds from 30 KB\/s to 1 MB\/s depending on the target hardware.\u003c\/p\u003e\n\n\u003ch2\u003eSupported Devices and Authorized Flashing\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists tens of thousands of supported devices in hundreds of device families, the same library as the other Flasher models, with supported cores including ARM, Cortex, PowerPC and Renesas RX. If the programmer is lost in the field, Authorized Flashing protects your firmware: once the set number of programming cycles is reached, the Flasher stops working for that project. The target connector is a male 20-pin IDC keyed box header with 0.1\" (2.54mm) pitch; pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon).\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eInternal rechargeable lithium-ion battery, or USB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBattery run time\u003c\/th\u003e\n\u003ctd\u003eUp to 10 hours of continuous use\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharging via USB\u003c\/th\u003e\n\u003ctd\u003e70 minutes at 1 A charging current\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eScreen\u003c\/th\u003e\n\u003ctd\u003e1.8\" 128 x 160 px RGB TFT, LED backlight\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 High-Speed, USB Type B\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMale 20-pin IDC keyed box header, 0.1\" (2.54mm) pitch, optional adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInternal flash memory\u003c\/th\u003e\n\u003ctd\u003e128 MB (TBW: 10 TB), up to 99 firmware images\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgramming speed\u003c\/th\u003e\n\u003ctd\u003e30 KB\/s to 1 MB\/s, depending on target hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTRef\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget cable length\u003c\/th\u003e\n\u003ctd\u003e20cm recommended and supplied; max. 2m, which may reduce target interface speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSize (without cables)\u003c\/th\u003e\n\u003ctd\u003e126mm x 70mm x 28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e140g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C (normal operation); +5°C to +45°C (battery charging)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +45°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eLess than 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher Portable PLUS\u003c\/li\u003e\n  \u003cli\u003eUSB cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo Ethernet or RS232 control. For a production station use the Flasher PRO, or the Flasher Compact inside a fixture.\u003c\/li\u003e\n  \u003cli\u003eBattery charging is limited to +5°C to +45°C, and storage to a maximum of +45°C, narrower than the +5°C to +60°C operating range.\u003c\/li\u003e\n  \u003cli\u003eActual programming speed depends on the target: SEGGER quotes 30 KB\/s to 1 MB\/s.\u003c\/li\u003e\n  \u003cli\u003eThe Renesas FINE interface works only in host-based mode, with a PC connected. Stand-alone support for Cortex devices is limited to CoreSight SoC-400 debug port setups.\u003c\/li\u003e\n  \u003cli\u003eCustomised versions are by arrangement with SEGGER; contact us with your requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher Portable PLUS Compared with Other SEGGER Flasher Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003cth\u003eHost and control interfaces\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher Portable PLUS (this product)\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, 1.8\" colour display\u003c\/td\u003e\n\u003ctd\u003eLi-ion battery or USB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-16-02-flasher-portable-plus-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-17-01-flasher-pro-programmer\"\u003eFlasher PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-17-02-flasher-pro-xl-programmer\"\u003eFlasher PRO XL\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-19-00-flasher-compact-programmer\"\u003eFlasher Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eField update of a Cortex-M controller inside a wind turbine nacelle, with no laptop and no mains supply. A service engineer carrying firmware for several product generations on one programmer. Reflashing Renesas RX-based machinery after a firmware fault, with Authorized Flashing capping how many units the image can be applied to.\u003c\/p\u003e\n\u003cp\u003eChoose the Portable PLUS for service and field work; for line-side programming, the Flasher PRO or Flasher Compact is the better fit.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Flasher Portable PLUS for \u003cspan data-ds-price=\"segger-5-16-02-flasher-portable-plus-programmer\"\u003e£1,100\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug and programming tools\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 20\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-portable-plus\/\"\u003eSEGGER Flasher Portable PLUS product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Portable_PLUS\"\u003eSEGGER Knowledge Base: Flasher Portable PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Portable_PLUS_V7\"\u003eSEGGER Knowledge Base: Flasher Portable PLUS V7\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173456095,"sku":"5.16.02","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-5-16-02-40212730183903.jpg?v=1689515217","url":"https:\/\/thedebugstore.com\/it\/products\/segger-5-16-02-flasher-portable-plus-programmer","provider":"Debug Store","version":"1.0","type":"link"}