{"product_id":"saleae-logic-pro-8-logic-analyser","title":"Saleae Logic Pro 8 Logic\/Analogue Analyser","description":"\u003csection\u003e\n  \u003ch2\u003eFull Description\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eSaleae Logic Pro 8\u003c\/strong\u003e by \u003cstrong\u003eSaleae\u003c\/strong\u003e is a professional \u003cem\u003emixed-signal logic analyser\u003c\/em\u003e designed for Electronic Design Engineers who need fast, reliable \u003cem\u003eprotocol decode\u003c\/em\u003e and deep visibility into digital and analogue behaviour during \u003cem\u003edebugging\u003c\/em\u003e. With \u003cstrong\u003e8 dual-purpose inputs\u003c\/strong\u003e that each capture digital and analogue, \u003cstrong\u003edigital sample rates up to 500 MS\/s\u003c\/strong\u003e (on up to four channels) or \u003cstrong\u003e100 MS\/s across all eight\u003c\/strong\u003e, and \u003cstrong\u003eanalogue sampling up to 50 MS\/s at 12-bit\u003c\/strong\u003e resolution, Logic Pro 8 pairs lab-grade specifications with a compact \u003cstrong\u003e53 × 53 × 12 mm\u003c\/strong\u003e aluminium enclosure for bench or field work. USB 3.0 streaming enables long captures limited primarily by system RAM, while cross-platform Logic 2 software accelerates capture, measurement and decode on Windows, macOS and Linux. :contentReference[oaicite:0]{index=0}\u003c\/p\u003e\n\n  \u003ch3\u003eMixed-Signal Architecture: One Probe Per Signal, Digital and Analogue Together\u003c\/h3\u003e\n  \u003cp\u003eEach of the eight inputs records \u003cem\u003eboth\u003c\/em\u003e digital state and analogue voltage on the same pin, so you can correlate protocol activity with real-world signal integrity without changing setups. Engineers can, for example, decode I²C while simultaneously examining pull-up strength and rise times, or verify SPI timing while checking analogue overshoot on SCLK or MOSI. This reduces fixture changes, eliminates probe re-arrangement, and shortens time-to-insight—especially when intermittent edges, crosstalk or power-rail coupling are at play. The ability to pair clean digital decoding with a \u003cstrong\u003e−10 V to +10 V\u003c\/strong\u003e analogue input range at \u003cstrong\u003e12-bit (4.88 mV\/LSB)\u003c\/strong\u003e gives enough headroom to examine 5 V logic with analogue margins, op-amp outputs in sensor boards, or 12 V-level translated GPIO lines in the same capture. :contentReference[oaicite:1]{index=1}\u003c\/p\u003e\n\n  \u003ch3\u003eHigh-Speed Sampling and Bandwidth for Modern Buses\u003c\/h3\u003e\n  \u003cp\u003eLogic Pro 8 sustains \u003cstrong\u003e500 MS\/s digital\u003c\/strong\u003e on up to four channels or \u003cstrong\u003e100 MS\/s across all eight\u003c\/strong\u003e when connected via USB 3.0, providing timing visibility for \u003cem\u003e100 MHz digital bandwidth\u003c\/em\u003e signals. Analogue capture runs to \u003cstrong\u003e50 MS\/s\u003c\/strong\u003e with a \u003cstrong\u003e5 MHz (−3 dB) analogue bandwidth\u003c\/strong\u003e, ideal for viewing rise\/fall behaviour, ringing and supply dips around switching events and moderate-frequency PWM. Practically, that means you can inspect a 50 MHz SPI clock’s duty cycle, verify UART sampling points well beyond 1 Mbaud, and confirm I²S\/PCM frame timing while checking analogue rail droop during burst activity—all in a single session. USB 3.0 is required for maximum rates; the software adapts available sample-rate\/channel combinations automatically to the host’s bandwidth. :contentReference[oaicite:2]{index=2}\u003c\/p\u003e\n\n  \u003ch3\u003eSignal Integrity: Protection, Impedance and Grounding That Respect Your DUT\u003c\/h3\u003e\n  \u003cp\u003eThe input front end is engineered to be present but unobtrusive. Inputs present approximately \u003cstrong\u003e2 MΩ ∥ 10 pF\u003c\/strong\u003e, minimising loading on high-impedance nodes and preserving edge fidelity on typical MCU and FPGA pins. Continuous \u003cstrong\u003e±25 V over-voltage protection\u003c\/strong\u003e safeguards the instrument during bring-up and probing, while a user-selectable digital threshold supports common logic families—\u003cstrong\u003e1.2 V, 1.8 V, 2.5 V, 3.3 V, 5 V\u003c\/strong\u003e as well as \u003cstrong\u003eRS-232\u003c\/strong\u003e, \u003cstrong\u003eRS-485\/422\u003c\/strong\u003e and \u003cstrong\u003e+12 V TTL\u003c\/strong\u003e. Dedicated ground leads shipped with the harness help reduce loop area and noise pickup, which translates into repeatable captures and fewer “phantom glitches” when you’re chasing marginal timing. :contentReference[oaicite:3]{index=3}\u003c\/p\u003e\n\n  \u003ch3\u003eLogic 2 Software: Fast Capture, Measurement and Protocol Decode\u003c\/h3\u003e\n  \u003cp\u003eThe cross-platform Logic 2 application turns raw samples into insight quickly. Built-in analysers decode a wide range of protocols—including \u003cstrong\u003eSPI\u003c\/strong\u003e, \u003cstrong\u003eI²C\u003c\/strong\u003e, \u003cstrong\u003eUART\/Serial\u003c\/strong\u003e, \u003cstrong\u003eCAN\u003c\/strong\u003e, \u003cstrong\u003eLIN\u003c\/strong\u003e, \u003cstrong\u003eI²S\/PCM\u003c\/strong\u003e, \u003cstrong\u003eMDIO\u003c\/strong\u003e, \u003cstrong\u003eJTAG\u003c\/strong\u003e and more—while measurement cursors, bookmarks and search\/filter tools help pinpoint anomalies across long captures. Engineers can export data to CSV, VCD, binary or MATLAB for post-processing, automate repetitive tasks via the Automation API, or extend capability with custom protocol decoders. This combination of decode breadth and workflow tooling shortens root-cause analysis from hours to minutes on typical embedded bring-up and regression investigations. :contentReference[oaicite:4]{index=4}\u003c\/p\u003e\n\n  \u003ch3\u003eDeep, Practical Recording: Long Runs without Losing Detail\u003c\/h3\u003e\n  \u003cp\u003eRather than a fixed internal memory, captures stream over USB to host RAM, making \u003cem\u003erecording length primarily a function of installed memory and data activity\u003c\/em\u003e. That means you can record for seconds, minutes or hours depending on bus idleness and selected rates—useful for chasing rare watchdog resets or sporadic bus contention. Example combinations from Saleae include \u003cstrong\u003e8-channel digital at 100 MS\/s\u003c\/strong\u003e and \u003cstrong\u003e3-channel analogue at 50 MS\/s\u003c\/strong\u003e, with the software presenting legal options based on channel selection and the host’s bandwidth. For teams tracking regressions over time, consistent capture presets ensure repeatable sampling across hosts. :contentReference[oaicite:5]{index=5}\u003c\/p\u003e\n\n  \u003ch3\u003ePortable, Robust Hardware for Bench and Field\u003c\/h3\u003e\n  \u003cp\u003eA \u003cstrong\u003e53 × 53 × 12 mm\u003c\/strong\u003e CNC-machined aluminium enclosure weighing about \u003cstrong\u003e60 g\u003c\/strong\u003e drops into a tool bag without fuss, yet sits firmly on the bench beside an oscilloscope or power analyser. The included kit—USB 3.0 cable, two 2×4 wire harnesses, sixteen micro-gripper hooks and a carry case—covers most probing situations immediately; additional harnesses and clip sets are available when you need to fan-out to headers and fine-pitch test points across larger assemblies. The compact footprint matters when you’re probing inside enclosures or crowded EVT rigs where clearance is tight and ground referencing is awkward. :contentReference[oaicite:6]{index=6}\u003c\/p\u003e\n\n  \u003ch3\u003eEveryday Debugging Scenarios\u003c\/h3\u003e\n  \u003cp\u003e\u003cstrong\u003eSPI mode mismatch:\u003c\/strong\u003e Capture MOSI, MISO, SCLK and CS at \u003cstrong\u003e100 MS\/s\u003c\/strong\u003e to confirm whether a peripheral expects CPOL\/CPHA different from your firmware; verify with the analyser’s SPI decoder while the analogue trace confirms overshoot on SCLK isn’t double-clocking the part. \u003cstrong\u003eI²C NACKs during bring-up:\u003c\/strong\u003e Use two digital channels for SDA\/SCL and an analogue channel on the 3.3 V rail at \u003cstrong\u003e50 MS\/s\u003c\/strong\u003e to spot a supply dip coincident with an address phase, leading you to add bulk capacitance or tune rise times. \u003cstrong\u003eUART framing errors:\u003c\/strong\u003e Decode at 921,600 baud with timing markers to measure jitter; the analogue overlay highlights a marginal threshold on a long cable that you mitigate by increasing drive or adding a buffer. \u003cstrong\u003eCAN bus intermittents:\u003c\/strong\u003e Trigger on error frames, then inspect analogue symmetry to uncover poor termination. \u003cstrong\u003ePower sequencing on embedded SOMs:\u003c\/strong\u003e Allocate several channels to rails and enables; 12-bit analogue resolution helps you verify millisecond offsets and brings up PMIC dependencies cleanly. :contentReference[oaicite:7]{index=7}\u003c\/p\u003e\n\n  \u003ch3\u003eChoosing the Right Model for Your Project\u003c\/h3\u003e\n  \u003cp\u003eLogic Pro 8 is an excellent fit when you need \u003cstrong\u003e8 channels\u003c\/strong\u003e with \u003cstrong\u003ehigh digital timing performance\u003c\/strong\u003e and \u003cstrong\u003euseful analogue visibility\u003c\/strong\u003e on embedded designs, motor controllers, audio interfaces and instrumentation. If your system spans wider buses or concurrent interfaces—say, parallel RGB with auxiliary control, or multiple SPI and UART channels—consider moving up to the \u003ca href=\"https:\/\/thedebugstore.com\/products\/saleae-logic-pro-16-logic-analyser?variant=44576293486815\"\u003eSaleae Logic Pro 16 mixed-signal logic analyser\u003c\/a\u003e for \u003cstrong\u003e16 channels\u003c\/strong\u003e at the same per-channel performance. For teams that primarily need digital timing without analogue capture and want a smaller budgetary footprint, the \u003ca href=\"https:\/\/thedebugstore.com\/fr-fr\/products\/saleae-logic-8-uk\"\u003eSaleae Logic 8 logic analyser\u003c\/a\u003e provides eight digital channels and integrates with the same Logic 2 workflow. :contentReference[oaicite:8]{index=8}\u003c\/p\u003e\n\n  \u003ch3\u003eRelated Products from The Debug Store\u003c\/h3\u003e\n  \u003cp\u003eExtend your setup with proven, compatible options available in-store. When you need more channels for parallel buses or simultaneous interface captures, the \u003ca href=\"https:\/\/thedebugstore.com\/products\/saleae-logic-pro-16-logic-analyser?variant=44576293486815\"\u003eSaleae Logic Pro 16 mixed-signal logic analyser\u003c\/a\u003e is the natural upgrade. For higher fan-out or permanent fixtures, add spare harnesses such as the \u003ca href=\"https:\/\/thedebugstore.com\/products\/saleae-wire-harness-2x4-to-test-clips-channels-0-3?variant=44576354042079\"\u003eSaleae 2×4 test-clip wire harness\u003c\/a\u003e to speed repeatable probing across boards. If you require deep memory and ultra-high timing on many channels for complex digital systems, explore advanced options like the \u003ca href=\"https:\/\/thedebugstore.com\/products\/acute-travellogic-34-channel-logic-analyser-uk?variant=44398203371743\"\u003eAcute TravelLogic 34-channel logic analyser\u003c\/a\u003e or \u003ca href=\"https:\/\/thedebugstore.com\/products\/zeroplus-lap-c-pro-logic-protocol-analyser-uk?variant=40764571746493\"\u003eZeroPlus LAP-C Pro series logic analyser\u003c\/a\u003e, which deliver expanded channel counts and very high sampling ceilings for specialised needs. :contentReference[oaicite:9]{index=9}\u003c\/p\u003e\n\n  \u003ch3\u003eSpecifications Summary and Software Compatibility\u003c\/h3\u003e\n  \u003cp\u003e\u003cstrong\u003eChannels:\u003c\/strong\u003e 8 digital\/analogue shared. \u003cstrong\u003eDigital rates:\u003c\/strong\u003e 500, 100, 50, 25, 12.5, 10, 6.25, 5, 4, 2.5, 2, 1 MS\/s (500 MS\/s on up to four channels via USB 3.0). \u003cstrong\u003eDigital bandwidth:\u003c\/strong\u003e 100 MHz. \u003cstrong\u003eAnalogue rates:\u003c\/strong\u003e up to 50 MS\/s with \u003cstrong\u003e5 MHz\u003c\/strong\u003e bandwidth. \u003cstrong\u003eADC:\u003c\/strong\u003e 12-bit, 4.88 mV\/LSB. \u003cstrong\u003eAnalogue input range:\u003c\/strong\u003e −10 V to +10 V. \u003cstrong\u003eProtection:\u003c\/strong\u003e continuous −25 V to +25 V. \u003cstrong\u003eInput impedance:\u003c\/strong\u003e ~2 MΩ ∥ 10 pF. \u003cstrong\u003ePC connection:\u003c\/strong\u003e USB 3.0 SuperSpeed (USB 2.0 supported with reduced performance). \u003cstrong\u003eOS support:\u003c\/strong\u003e Windows, macOS and Linux with the Logic 2 software. These specifications come directly from the Saleae datasheet and support materials to ensure accurate selection and comparison for your next project. :contentReference[oaicite:10]{index=10}\u003c\/p\u003e\n\u003c\/section\u003e","brand":"Saleae, Inc","offers":[{"title":"Black","offer_id":44573275848927,"sku":"SAL-00113","price":830.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":44573275816159,"sku":"SAL-00114","price":830.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/saleae-inc-saleae-logic-pro-8-logic-analyser-debug-store-uk-40918301704415.jpg?v=1701612706","url":"https:\/\/thedebugstore.com\/it\/products\/saleae-logic-pro-8-logic-analyser","provider":"Debug Store","version":"1.0","type":"link"}