{"product_id":"mikroe-2436-voltmeter-click-board-uk","title":"Voltmeter Click Board™","description":"\u003cp\u003eThe design of the \u003cstrong\u003eVoltmeter Click Board™\u003c\/strong\u003e is based on an OpAmp set up as a differential amplifier with a buffered input.\u003c\/p\u003e\n\n\u003cp\u003eTwo onboard screw terminals (probe+ and probe-) are bringing in the current, which then flows through a row of four resistors. A voltage – proportional to the input charge – is generated across the last two resistors. From there it is sent to the differential amplifier that further intensifies the difference between the two inputs (+\/-).\u003cbr\u003e\n\u003cbr\u003e\nThe resulting charge is exactly 33 times lower than the actual measured voltage. It is converted by an onboard 12-bit ADC before being outputted through the mikroBUS™ SPI interface (the firmware in the target board MCU should be set up to multiply the ADC value to get the actual voltage). It is also possible to output the analog value directly through the mikroBUS™ AN pin (useful if the target MCU has a higher resolution ADC).\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\nThe \u003cstrong\u003eVoltmeter Click Board™\u003c\/strong\u003e can work with either a 3.3V or a 5V power supply.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768391557309,"sku":"MIKROE-2436","price":29.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-voltmeter-click-board-30213928255677.jpg?v=1685052291","url":"https:\/\/thedebugstore.com\/it\/products\/mikroe-2436-voltmeter-click-board-uk","provider":"Debug Store","version":"1.0","type":"link"}