{"product_id":"active-pro-debug-toolbox","title":"Active-Pro Firmware Debugger","description":"\u003cp\u003eThe Active-Pro Firmware Debugger (AP-FD) from Active Firmware Tools is a USB 2.0 firmware debugger and logic analyser that captures 8 digital channels at up to 120 Msps and 3 analogue channels at up to 1 Msps, time-aligned with debug output from up to four processors or FPGAs. Firmware sends text, values and events through the Active Debug Port on one or two GPIO pins, with 1 ns timestamps. It is built for firmware bring-up and multi-processor timing work, where stopping a core at a breakpoint would change the behaviour you are trying to see. It sits in our \u003ca href=\"\/it\/collections\/logic-analysers\"\u003elogic analysers\u003c\/a\u003e range alongside the other \u003ca href=\"\/it\/collections\/active-firmware-catalogue\"\u003eActive Firmware Tools debuggers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eActive Debug Port: Firmware Output from Up to Four Processors\u003c\/h2\u003e\n\u003cp\u003eFour Active Debug Ports (A to D) connect to four separate processors or FPGAs at once. Each runs as 1-wire UART on a TX pin (baud rates dividing exactly from 30 MHz, such as 1 Mbaud, 500 kbaud or 250 kbaud), 1-wire SWV on the SWV\/ITM pin of ARM Cortex-M parts, or 2-wire clock and data at up to 80 Mbit\/s, which an SPI peripheral in transmit-only mode can drive.\u003c\/p\u003e\n\u003cp\u003eOutput calls exist for C, C++, MicroPython, Verilog\/SystemVerilog and VHDL, with the library source published on GitHub.\u003c\/p\u003e\n\n\u003ch2\u003e8-Channel Logic Analyser with Analogue and Current Inputs\u003c\/h2\u003e\n\u003cp\u003eThe 8 digital channels sample at up to 120 Msps, and the FPGA in the pod frames hardware-decoded protocols at up to 240 Msps before data reaches the PC. Analogue CH1 and CH2 are single-ended, 0V to 20V or ±10V. CH3 works single-ended, or CH3 and CH4 work as a differential pair across a shunt resistor for current measurement (50 mΩ to 10 Ω recommended). All analogue inputs tolerate ±30V.\u003c\/p\u003e\n\u003cp\u003eThe capture buffer is set from 1 MB to 1 TB in host RAM. Triggers fire on analogue or digital edges, pulse widths, or firmware data itself: a text match or a value crossing a threshold on any Active Debug Port.\u003c\/p\u003e\n\n\u003ch2\u003eProtocol Decoding and Python Custom Decoders\u003c\/h2\u003e\n\u003cp\u003eHardware decoders cover I2C\/SMBus, UART (8- or 9-bit, normal or inverted) and four SPI variants; software adds 1-Wire, MDIO and CHSI on any port, and LIN, RS-232 and DS101 on Port A through the analogue inputs. Python custom decoders run after capture, with examples for CAN, Modbus, SWD, JTAG, I³C, QSPI and more.\u003c\/p\u003e\n\n\u003ch2\u003eSignal Outputs, Automation and Software\u003c\/h2\u003e\n\u003cp\u003eTwo digital outputs (0V, 3.3V or tri-state, 8 mA) and two analogue outputs (DC 0V to 3.3V; A1 also sine, ramp, triangle and square) stimulate the target. The application runs on Windows, Mac and Linux, with an Automation API and an MCP server for scripted test.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0, USB-C cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDigital channels\u003c\/th\u003e\n\u003ctd\u003e8, up to 120 Msps\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardware bus decoders\u003c\/th\u003e\n\u003ctd\u003eUp to 240 Msps\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnalogue channels\u003c\/th\u003e\n\u003ctd\u003e3, up to 1 Msps\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnalogue CH1, CH2 range\u003c\/th\u003e\n\u003ctd\u003eSingle-ended, 0V to 20V or ±10V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnalogue CH3\/CH4\u003c\/th\u003e\n\u003ctd\u003eSingle-ended or differential pair for current measurement\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnalogue input tolerance\u003c\/th\u003e\n\u003ctd\u003e±30V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eActive Debug Ports\u003c\/th\u003e\n\u003ctd\u003e4 (A to D), one processor or FPGA each\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eActive Debug Port modes\u003c\/th\u003e\n\u003ctd\u003e1-wire UART, 1-wire SWV, 2-wire clock and data up to 80 Mbit\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTimestamp resolution\u003c\/th\u003e\n\u003ctd\u003e1 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCapture buffer\u003c\/th\u003e\n\u003ctd\u003e1 MB to 1 TB, in host RAM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDigital outputs\u003c\/th\u003e\n\u003ctd\u003eD0, D1: 0V, 3.3V or tri-state, up to 8 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnalogue outputs\u003c\/th\u003e\n\u003ctd\u003eA0, A1: DC 0V to 3.3V; A1 also sine, ramp, triangle, square\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eWindows, Mac, Linux\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAnalogue sampling is 1 Msps, so it does not replace an oscilloscope for fast edges. The Active-Pro Ultra samples 6 analogue channels at up to 50 Msps.\u003c\/li\u003e\n  \u003cli\u003eFirmware must be instrumented with Active Debug Port output calls. It does not halt cores, set breakpoints or program flash.\u003c\/li\u003e\n  \u003cli\u003eCAN is not a built-in decoder in the current software build; use the supplied Python custom decoder example.\u003c\/li\u003e\n  \u003cli\u003eDigital inputs D0 to D7 accept -0.5V to +6V sustained (±30V transient), with the logic threshold adjustable from 0V to +4V. Check your target's I\/O levels against these before connecting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eComparison with Other Active Firmware Tools Debuggers\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDigital channels\u003c\/th\u003e\n\u003cth\u003eAnalogue channels\u003c\/th\u003e\n\u003cth\u003eActive Debug Ports\u003c\/th\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eActive Debugger\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eActive-Pro (this product)\u003c\/td\u003e\n\u003ctd\u003e8 at 120 Msps\u003c\/td\u003e\n\u003ctd\u003e3 at 1 Msps\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"active-pro-debug-toolbox\"\u003e£549\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eActive-Pro Ultra\u003c\/td\u003e\n\u003ctd\u003e8 at 500 Msps\u003c\/td\u003e\n\u003ctd\u003e6 at up to 50 Msps\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 SuperSpeed\u003c\/td\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eCorrelating Cortex-M state messages over SWV with the I2C sensor traffic they trigger. Logging sleep and wake events from a low-power MCU while measuring its supply current through a shunt on CH3\/CH4. Timing messages between a host MCU and an FPGA on separate ports against one 1 ns timebase.\u003c\/p\u003e\n\u003cp\u003eIt suits firmware engineers debugging live hardware that cannot be paused.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eActive-Pro pod\u003c\/li\u003e\n  \u003cli\u003e19 test clips\u003c\/li\u003e\n  \u003cli\u003eColour-coded test leads\u003c\/li\u003e\n  \u003cli\u003eUSB-C cable\u003c\/li\u003e\n  \u003cli\u003eStorage case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOrder the Active-Pro Firmware Debugger from \u003cspan data-ds-price=\"active-pro-debug-toolbox\"\u003e£549\u003c\/span\u003e ex VAT. Try the application in demo mode first, without hardware, to check the workflow.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed: 30 October 2026\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (7 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/logic-analyzer\"\u003eActive-Pro product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/getting-started\"\u003eUser's Manual: Getting Started\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/main-window-stbtg\"\u003eUser's Manual: Active Debug Port, Firmware Integration\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/main-window-nxh86\"\u003eUser's Manual: Protocol Decoding\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/triggers\"\u003eUser's Manual: Buffers and Triggers\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/main-window-ad67j\"\u003eUser's Manual: Current Analyzer\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/main-window-5skjp\"\u003eUser's Manual: Devices\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Active Firmware Tools","offers":[{"title":"Default Title","offer_id":44127073599711,"sku":"AP-FD","price":549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/active-firmware-tools-ap-fd-active-pro-firmware-debugger-43389743268063.png?v=1724368242","url":"https:\/\/thedebugstore.com\/it\/products\/active-pro-debug-toolbox","provider":"Debug Store","version":"1.0","type":"link"}