{"title":"SEGGER Microcontroller GmbH","description":"\u003cp\u003eSEGGER Microcontroller is a leading provider of embedded systems solutions, offering a comprehensive range of software and hardware tools for developers. With over 30 years of experience, SEGGER specializes in RTOS, software libraries, debug probes, and development tools. Their products are known for reliability, efficiency, and ease of use, catering to various industries and applications in the embedded systems market.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSEGGER J-Link debug probes are widely used for professional embedded software development, firmware debugging, flash programming, and real-time system analysis. The SEGGER product range also includes J-Trace debuggers, flash programmers, and embedded development tools supporting ARM, Cortex-M, and RISC-V architectures. With reliable JTAG\/SWD debugging, fast flash programming, and advanced trace analysis capabilities, SEGGER tools help engineers streamline embedded systems development across industrial, automotive, IoT, and electronics applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eExplore the full range of SEGGER J-Link debug probes, flash programmers, embedded development tools, software solutions, and accessories at The Debug Store.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","products":[{"product_id":"segger-j-link-pro-debugger-programmer-8-12-00","title":"SEGGER J-Link PRO, sonda di debug Ethernet\/USB ultraveloce","description":"\u003cp\u003eLa SEGGER J-Link PRO (codice 8.12.00) è una sonda di debug JTAG\/SWD Ethernet e USB con velocità dell'interfaccia target fino a 50 MHz, velocità di download fino a 4 MB\/s e interfaccia target da 1.2V a 5V. Aggiunge una porta Ethernet da 100 Mbit\/s con web server integrato, la misura analogica della potenza a 200 kHz con risoluzione di 50µA e le licenze per J-Flash, Unlimited Flash Breakpoints, Ozone e RDI. È adatta ai team firmware che devono raggiungere un target attraverso la LAN, lontano dal PC host, su dispositivi ARM Cortex, RISC-V, Renesas RX e Microchip PIC32.\u003c\/p\u003e\n\n\u003ch2\u003eDebug JTAG\/SWD remoto via Ethernet\u003c\/h2\u003e\n\u003cp\u003eLa sonda si collega via Ethernet a 100 Mbit\/s o USB 2.0 Hi-Speed, quindi la stessa unità può stare sulla scrivania o in rete. Alla consegna è configurata per il DHCP e con J-Link Configurator si può impostare un indirizzo statico. Un web server integrato sulla porta TCP 80 consente la configurazione da browser. SEGGER propone l'interfaccia Ethernet per il debug remoto in team distribuiti e grandi ambienti di sviluppo. Le linee dati Ethernet sono isolate secondo IEEE 802.3 con una tensione di prova di 1500 Vrms per un minuto.\u003c\/p\u003e\n\n\u003ch2\u003eInterfaccia a 50 MHz, download a 4 MB\/s e misura della potenza\u003c\/h2\u003e\n\u003cp\u003eSEGGER indica fino a 50 MHz di velocità dell'interfaccia target e fino a 4 MB\/s di velocità di download, contro i 15 MHz e 1 MB\/s massimi di J-Link BASE e PLUS. Il segnale SWO viene campionato fino a 100 MHz. La PRO misura la corrente del target con una frequenza di campionamento di 200 kHz e una risoluzione di 50µA, e può alimentare il target con 5V fino a 300mA prelevati dalla linea USB. Il target utilizza il connettore standard J-Link a 20 pin da 0.1\"; le assegnazioni dei pin e gli adattatori sono nella nostra guida \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003epinout del connettore SEGGER J-Link a 20 pin\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eInterfacce, core supportati e licenze\u003c\/h2\u003e\n\u003cp\u003eLe interfacce di debug supportate sono JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE e Silicon Labs C2. L'elenco dei core di SEGGER comprende ARM da Cortex-M0 a Cortex-M85, Cortex-A e Cortex-R, i core ARM di generazioni precedenti da ARM7 a ARM11, core RISC-V di SiFive, Andes, Codasip e Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 e Cadence Tensilica Xtensa. La licenza J-Flash è preinstallata sulla sonda, quindi non c'è nulla da attivare; sono inclusi anche Unlimited Flash Breakpoints, Ozone e RDI. Il debug in monitor mode è supportato sui core ARMv7-M e ARMv8-M, e sono supportati RTT e VCOM (pin 5 e 17, solo SWD).\u003c\/p\u003e\n\n\u003ch2\u003eSoftware e compatibilità con gli IDE\u003c\/h2\u003e\n\u003cp\u003eIl software J-Link è gratuito, per Windows e Linux (x86-64 e ARM64) e macOS (x86-64 e Apple Silicon). SEGGER indica il supporto, tra gli altri, in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso e Visual Studio Code.\u003c\/p\u003e\n\n\u003ch2\u003eContenuto della confezione\u003c\/h2\u003e\n\u003cp\u003eSonda J-Link PRO, cavo piatto a 20 pin da 0.1\" e cavo USB-C.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifiche\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfacce host\u003c\/th\u003e\n\u003ctd\u003eEthernet 100 Mbit\/s; USB 2.0 Hi-Speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnettore target\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD a 20 pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfacce di debug supportate\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensione dell'interfaccia target (VIF)\u003c\/th\u003e\n\u003ctd\u003eDa 1.2V a 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCorrente assorbita da VTref\u003c\/th\u003e\n\u003ctd\u003eMeno di 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentazione del target\u003c\/th\u003e\n\u003ctd\u003e5V (derivati da USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVelocità dell'interfaccia target\u003c\/th\u003e\n\u003ctd\u003eMax. 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFrequenza di campionamento SWO\u003c\/th\u003e\n\u003ctd\u003eMax. 100 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVelocità di download\u003c\/th\u003e\n\u003ctd\u003eFino a 4 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMisura della potenza\u003c\/th\u003e\n\u003ctd\u003eFrequenza di campionamento 200 kHz, risoluzione 50µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolamento Ethernet\u003c\/th\u003e\n\u003ctd\u003eLinee dati secondo IEEE 802.3, 1500 Vrms per un minuto\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLicenze incluse\u003c\/th\u003e\n\u003ctd\u003eJ-Flash (preinstallata), Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensioni (senza cavi)\u003c\/th\u003e\n\u003ctd\u003e100mm x 53mm x 27mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePeso (senza cavi)\u003c\/th\u003e\n\u003ctd\u003e73g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTemperatura di esercizio\u003c\/th\u003e\n\u003ctd\u003eDa +5°C a +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTemperatura di stoccaggio\u003c\/th\u003e\n\u003ctd\u003eDa -20°C a +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUmidità relativa\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, senza condensa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55024, EN 55032\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSistema operativo host\u003c\/th\u003e\n\u003ctd\u003eWindows e Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitazioni\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eÈ supportata una sola connessione Ethernet alla volta.\u003c\/li\u003e\n  \u003cli\u003eNessun Power over Ethernet; per i nodi di test farm alimentati in PoE scelga la J-Link PRO PoE.\u003c\/li\u003e\n  \u003cli\u003eLo schermo Ethernet non è isolato; per un isolamento efficace SEGGER prescrive un cavo a doppino non schermato.\u003c\/li\u003e\n  \u003cli\u003eI valori di 50 MHz e 4 MB\/s sono massimi; il clock di interfaccia utilizzabile e la velocità di programmazione della flash dipendono dal dispositivo target.\u003c\/li\u003e\n  \u003cli\u003eNessun trace ETM su Cortex-M (usare SEGGER J-Trace) e nessuna interfaccia target QSPI.\u003c\/li\u003e\n  \u003cli\u003eVCOM è disponibile solo durante il debug in SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link PRO a confronto con i modelli correlati\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModello\u003c\/th\u003e\n\u003cth\u003eInterfaccia host\u003c\/th\u003e\n\u003cth\u003eVelocità di download\u003c\/th\u003e\n\u003cth\u003eVelocità dell'interfaccia target\u003c\/th\u003e\n\u003cth\u003eEthernet\u003c\/th\u003e\n\u003cth\u003ePower over Ethernet\u003c\/th\u003e\n\u003cth\u003ePrezzo IVA esclusa\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eFino a 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eFino a 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-link-ultra-plus-8-16-28\"\u003eJ-Link ULTRA+ (J-Link Ultra)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eFino a 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eFino a 50 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-ultra-plus-8-16-28\"\u003e£870\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link PRO (questo prodotto)\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed ed Ethernet 100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003eFino a 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eFino a 50 MHz\u003c\/td\u003e\n\u003ctd\u003eSì\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003eJ-Link PRO PoE\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed ed Ethernet 100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003eFino a 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eFino a 50 MHz\u003c\/td\u003e\n\u003ctd\u003eSì\u003c\/td\u003e\n\u003ctd\u003eSì, IEEE 802.3af\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-link-wifi-8-14-28\"\u003eJ-Link WiFi\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed e WiFi IEEE 802.11 b\/g\/n\u003c\/td\u003e\n\u003ctd\u003eFino a 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eFino a 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-wifi-8-14-28\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eApplicazioni tipiche\u003c\/h2\u003e\n\u003cp\u003eDebug di una scheda Cortex-M33 o Cortex-A in laboratorio da una scrivania a un altro piano, attraverso la LAN aziendale. Hardware da banco condiviso da un team firmware distribuito, raggiunto tramite indirizzo IP anziché con un cavo USB.\u003c\/p\u003e\n\u003cp\u003eScelga la ULTRA+ per gli stessi valori di 50 MHz e 4 MB\/s solo via USB, oppure la PRO PoE per nodi di test farm alimentati dalla rete.\u003c\/p\u003e\n\n\u003cp\u003eOrdini la J-Link PRO a \u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e IVA esclusa. Verifichi il codice del suo dispositivo nell'elenco dei dispositivi supportati da SEGGER, oppure ci chieda un preventivo formale. Veda l'intera gamma nella nostra collezione \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003esonde di debug SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eUltima revisione: 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eFonti (7 pagine del produttore)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-pro\/\"\u003ePagina prodotto SEGGER J-Link Pro\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_PRO\"\u003eSEGGER Knowledge Base: J-Link PRO\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Setting_up_Ethernet_interface\"\u003eSEGGER Knowledge Base: configurazione dell'interfaccia Ethernet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-pro-poe\/\"\u003ePagina prodotto SEGGER J-Link Pro PoE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003ePrezzi e licenze SEGGER J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base: utilizzo della funzionalità VCOM di J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: IDE supportati\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263171948767,"sku":"8.12.00","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-12-00-40189792583903.jpg?v=1688907179"},{"product_id":"segger-j-link-ultra-plus-8-16-28","title":"SEGGER J-Link ULTRA+ Ultra-Fast JTAG\/SWD Debug Probe","description":"\u003cp\u003eThe SEGGER J-Link ULTRA+ (part number 8.16.28, listed by SEGGER as J-Link Ultra) is a USB JTAG\/SWD debug probe with up to 50 MHz target interface speed, download speeds up to 4 MB\/s and a 1.2V to 5V target interface. It adds analogue power measurement at 200 kHz with 50µA resolution, and includes licences for J-Flash, Unlimited Flash Breakpoints, Ozone and RDI. It suits firmware teams who flash large images many times a day on ARM Cortex, RISC-V, Renesas RX and Microchip PIC32 targets and want to see current draw while they debug.\u003c\/p\u003e\n\n\u003ch2\u003eHigh-Speed JTAG\/SWD Against the J-Link PLUS\u003c\/h2\u003e\n\u003cp\u003eSEGGER quotes up to 4 MB\/s download speed and up to 50 MHz target interface speed for the ULTRA+, against up to 1 MB\/s and 15 MHz for J-Link BASE and PLUS. SEGGER describes it as 100% compatible with J-Link PLUS, just faster, so existing J-Link projects and scripts carry over unchanged. Actual flash programming time depends on the target device. SWO is sampled at up to 100 MHz.\u003c\/p\u003e\n\n\u003ch2\u003ePower Measurement While You Debug\u003c\/h2\u003e\n\u003cp\u003eThe ULTRA+ measures target current at a 200 kHz sampling frequency with 50µA resolution. On low-power designs that shows current spikes and sleep-mode entry during a debug session; with 50µA resolution it does not replace a dedicated meter for microamp sleep current. The probe can also supply the target with 5V at up to 300mA from the USB rail.\u003c\/p\u003e\n\n\u003ch2\u003eInterfaces, Supported Cores and Licences\u003c\/h2\u003e\n\u003cp\u003eThe host link is USB 2.0 Hi-Speed over USB-C. The target uses the standard J-Link 20-pin 0.1\" connector; pin assignments and adapters are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Supported debug interfaces are JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2. SEGGER's cores list covers ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, legacy ARM7 to ARM11, RISC-V cores from SiFive, Andes, Codasip and Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 and Cadence Tensilica Xtensa. J-Flash, Unlimited Flash Breakpoints, Ozone and RDI licences are included, along with RTT and VCOM (pins 5 and 17, SWD only).\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and IDE Compatibility\u003c\/h2\u003e\n\u003cp\u003eJ-Link software is free of charge, on Windows and Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon). SEGGER lists support in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso and Visual Studio Code, among others.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eJ-Link ULTRA+ probe, 20-pin 0.1\" ribbon cable and a USB-C cable.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported debug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTref\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V (derived from USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWO sampling frequency\u003c\/th\u003e\n\u003ctd\u003eMax. 100 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower measurement\u003c\/th\u003e\n\u003ctd\u003e200 kHz sampling frequency, 50µA resolution\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIncluded licences\u003c\/th\u003e\n\u003ctd\u003eJ-Flash, Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e72mm x 45mm x 18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e40g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55032, EN 55035\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUSB only. For Ethernet access choose the J-Link PRO, or the J-Link PRO PoE for Power over Ethernet.\u003c\/li\u003e\n  \u003cli\u003eThe 50 MHz and 4 MB\/s figures are maximums; the usable interface clock and flash programming rate depend on the target device.\u003c\/li\u003e\n  \u003cli\u003eNo ETM trace on Cortex-M (use SEGGER J-Trace) and no QSPI target interface.\u003c\/li\u003e\n  \u003cli\u003eVCOM is available only when debugging over SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link ULTRA+ Compared with PLUS and PRO\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003cth\u003eEthernet\u003c\/th\u003e\n\u003cth\u003ePower over Ethernet\u003c\/th\u003e\n\u003cth\u003eSupported cores\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link ULTRA+ (J-Link Ultra, this product)\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-ultra-plus-8-16-28\"\u003e£870\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-link-pro-debugger-programmer-8-12-00\"\u003eJ-Link PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed and 100 Mbit\/s Ethernet\u003c\/td\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003eJ-Link PRO PoE\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed and 100 Mbit\/s Ethernet\u003c\/td\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes, IEEE 802.3af\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eRepeated download of multi-megabyte images to Cortex-A or Cortex-M7 targets with external flash during development. Watching active current and wake-up spikes on an nRF or STM32L low-power design while stepping through code; microamp sleep current still needs a dedicated meter. Debug at 50 MHz SWD on fast Cortex-M33 parts where a 15 MHz probe is the bottleneck.\u003c\/p\u003e\n\u003cp\u003eChoose the J-Link PRO or PRO PoE instead if the probe must sit on a network rather than a USB port.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Link ULTRA+ for \u003cspan data-ds-price=\"segger-j-link-ultra-plus-8-16-28\"\u003e£870\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-j-link-debug-probes\"\u003eSEGGER J-Link debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed: 30 October 2026\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (8 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-ultra\/\"\u003eSEGGER J-Link Ultra product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop-us.segger.com\/product\/j-link-ultra-8-16-28\/\"\u003eSEGGER US shop: J-Link Ultra (8.16.28)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_ULTRA\"\u003eSEGGER Knowledge Base: J-Link Ultra\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-plus\/\"\u003eSEGGER J-Link PLUS product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-pro\/\"\u003eSEGGER J-Link Pro product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-pro-poe\/\"\u003eSEGGER J-Link Pro PoE product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base: Using J-Link VCOM functionality\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263171981535,"sku":"8.16.28","price":870.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-16-28-segger-j-link-ultra-debug-flash-probe-8-16-28-72648636039543.png?v=1736472523"},{"product_id":"segger-j-link-wifi-8-14-28","title":"SEGGER J-Link WiFi Wireless Debug Probe (8.14.28)","description":"\u003cp\u003eThe SEGGER J-Link WiFi (part number 8.14.28) is a JTAG\/SWD debug probe that connects to the host over IEEE 802.11 b\/g\/n WiFi in the 2.4 GHz band, or over USB 2.0 Hi-Speed, with up to 15 MHz target interface speed, download speeds up to 1 MB\/s and a 1.2V to 5V target interface. SEGGER lists J-Flash, Unlimited Flash Breakpoints, Ozone and RDI licences with it. It is built for targets that move, as in robotics, or that must stay shielded or inside a hazardous area, away from the development PC.\u003c\/p\u003e\n\n\u003ch2\u003eWireless JTAG\/SWD Debug Probe for Moving or Shielded Targets\u003c\/h2\u003e\n\u003cp\u003eThe probe travels with the target and links to the PC over WiFi, so a robot arm or a moving platform can be debugged without a USB cable trailing back to the bench. Where the target operates in a hazardous environment, the PC and the engineer can stay outside, behind a physical barrier. The J-Link WiFi is USB powered and shares that supply with the target: it can supply the target with 5V at up to 300mA. On the target side it uses the standard J-Link 20-pin 0.1\" connector; pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eWiFi Setup Over USB\u003c\/h2\u003e\n\u003cp\u003eThe network is set up while the probe is connected by USB. In J-Link Configurator you enter the SSID and password in the WiFi configuration section; in J-Link Commander the SetWifi command sets the SSID. SEGGER notes that WiFi probes are usually only shown in J-Link Configurator when connected via USB, and that UDP discovery will usually not work for them.\u003c\/p\u003e\n\n\u003ch2\u003eLicences, Debug Interfaces, RTT and VCOM\u003c\/h2\u003e\n\u003cp\u003eSEGGER's licence overview lists J-Flash, Unlimited Flash Breakpoints, Ozone and RDI as included with the J-Link WiFi, with monitor-mode debugging. Supported debug interfaces are JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2. SEGGER's cores list covers ARM Cortex-M, Cortex-A and Cortex-R, legacy ARM7 to ARM11, RISC-V cores from SiFive, Andes, Codasip and Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 and Cadence Tensilica Xtensa. Real Time Transfer (RTT) moves data between the running target and the host over the debug connection, and VCOM bridges a target UART to a virtual COM port when debugging over SWD.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and IDE Compatibility\u003c\/h2\u003e\n\u003cp\u003eJ-Link software is free of charge. The software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon). SEGGER lists support in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso and Visual Studio Code, among others.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eJ-Link WiFi probe, 20-pin 0.1\" ribbon cable and a USB cable.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interfaces\u003c\/th\u003e\n\u003ctd\u003eIEEE 802.11 b\/g\/n WiFi, 2.4 GHz; USB 2.0 Hi-Speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported debug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTref\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V (derived from USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWO sampling frequency\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 220mA at 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIncluded licences\u003c\/th\u003e\n\u003ctd\u003eJ-Flash, Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e103mm x 53mm x 28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e70g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStandards (listed by SEGGER under EMC)\u003c\/th\u003e\n\u003ctd\u003eEN 301 489-1\/-17, EN 300 328, EN 62368\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWiFi is 2.4 GHz IEEE 802.11 b\/g\/n only.\u003c\/li\u003e\n  \u003cli\u003eInitial WiFi setup needs a USB connection, and UDP discovery will usually not work over WiFi.\u003c\/li\u003e\n  \u003cli\u003eDownload speed is up to 1 MB\/s and target interface speed up to 15 MHz; the J-Link ULTRA+ and PRO models reach up to 4 MB\/s and 50 MHz.\u003c\/li\u003e\n  \u003cli\u003eNo ETM trace on Cortex-M (use SEGGER J-Trace) and no QSPI target interface.\u003c\/li\u003e\n  \u003cli\u003eVCOM is available only when debugging over SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link WiFi Compared with PLUS and PRO\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003cth\u003eEthernet\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link WiFi (this product)\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed and IEEE 802.11 b\/g\/n WiFi\u003c\/td\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-wifi-8-14-28\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-link-pro-debugger-programmer-8-12-00\"\u003eJ-Link PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed and 100 Mbit\/s Ethernet\u003c\/td\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003eJ-Link PRO PoE\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed and 100 Mbit\/s Ethernet\u003c\/td\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003ctd\u003eYes, with IEEE 802.3af PoE\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eDebugging the Cortex-M motor controller of a mobile robot while it drives, with RTT logs streamed back to the PC. Firmware work on a target that runs inside a test chamber or a guarded machine cell, with the engineer outside the barrier.\u003c\/p\u003e\n\u003cp\u003eIf the probe can stay wired to a network, the J-Link PRO adds 50 MHz and 4 MB\/s over Ethernet.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Link WiFi for \u003cspan data-ds-price=\"segger-j-link-wifi-8-14-28\"\u003e£1,100\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-wifi\/\"\u003eSEGGER J-Link WiFi product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_WiFi\"\u003eSEGGER Knowledge Base: J-Link WiFi\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Setting_up_Ethernet_interface\"\u003eSEGGER Knowledge Base: Setting up Ethernet interface (WiFi setup)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003eSEGGER J-Link pricing and licence overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop-us.segger.com\/product\/j-link-wifi-8-14-28\/\"\u003eSEGGER US shop: J-Link WiFi (8.14.28)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172014303,"sku":"8.14.28","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-14-28-segger-j-link-wifi-8-14-28-42714466615519.png?v=1722900000"},{"product_id":"segger-8-02-28-j-link-plus-classic-debugger","title":"SEGGER J-Link PLUS Classic – USB JTAG\/SWD Debug Probe","description":"\u003cp\u003eThe SEGGER J-Link PLUS Classic (part number 8.08.28) is a USB JTAG\/SWD debug probe with a 1.2V to 5V target interface, up to 15 MHz target interface speed and download speeds up to 1 MB\/s. It shares the J-Link BASE electrical specification and adds licences for J-Flash, Unlimited Flash Breakpoints, Ozone and RDI, so one desktop probe covers firmware debug from flash and small-batch flash programming. It suits firmware bring-up on ARM Cortex, RISC-V, Renesas RX and Microchip PIC32 targets where a USB host connection is all you need.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link PLUS Licences Included on the Probe\u003c\/h2\u003e\n\u003cp\u003eThe J-Flash licence is preinstalled on the probe, so there is nothing to activate. J-Flash programs internal and external flash without an IDE. Unlimited Flash Breakpoints lets you set breakpoints in flash beyond the number of hardware breakpoints the core provides. Ozone, SEGGER's standalone debugger, and the RDI licence complete the pack. Monitor-mode debugging is supported on ARMv7-M and ARMv8-M cores.\u003c\/p\u003e\n\n\u003ch2\u003eUSB JTAG\/SWD Debug Probe for 1.2V to 5V Targets\u003c\/h2\u003e\n\u003cp\u003eThe host link is USB 2.0 Hi-Speed over a USB Type B connector, and the probe is USB powered. On the target side it uses the standard J-Link 20-pin 0.1\" connector; pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Supported debug interfaces are JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2. The probe can supply the target with 5V at up to 300mA from the USB rail.\u003c\/p\u003e\n\n\u003ch2\u003eSupported Cores, RTT and VCOM\u003c\/h2\u003e\n\u003cp\u003eSEGGER's supported cores list for J-Link PLUS covers ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, legacy ARM7 to ARM11, RISC-V cores from SiFive, Andes, Codasip and Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 and Cadence Tensilica Xtensa. Real Time Transfer (RTT) moves data between the running target and the host over the debug connection. Where a UART is available, VCOM bridges it to a virtual COM port using pins 5 (J-Link Tx) and 17 (J-Link Rx) of the 20-pin connector, when debugging over SWD.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and IDE Compatibility\u003c\/h2\u003e\n\u003cp\u003eJ-Link software is free of charge. The software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon). SEGGER lists support in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso and Visual Studio Code, among others. Multiple J-Links can run from one PC, each identified by its serial number.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eJ-Link PLUS Classic probe, 20-pin 0.1\" ribbon cable and a USB cable.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB Type B\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported debug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTref\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V (derived from USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWO sampling frequency\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 50mA plus target supply current\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIncluded licences\u003c\/th\u003e\n\u003ctd\u003eJ-Flash (preinstalled), Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e100mm x 53mm x 27mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e70g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUSB only. For Ethernet access choose the J-Link PRO, or the J-Link PRO PoE for Power over Ethernet.\u003c\/li\u003e\n  \u003cli\u003eDownload speed is up to 1 MB\/s and target interface speed up to 15 MHz; the J-Link ULTRA+ and PRO models reach up to 4 MB\/s and 50 MHz.\u003c\/li\u003e\n  \u003cli\u003eNo ETM trace on Cortex-M (use SEGGER J-Trace) and no QSPI target interface.\u003c\/li\u003e\n  \u003cli\u003eVCOM is available only when debugging over SWD.\u003c\/li\u003e\n  \u003cli\u003eIf you only need debug without the licences, the \u003ca href=\"\/it\/products\/segger-8-08-00-j-link-base-classic\"\u003eJ-Link BASE Classic\u003c\/a\u003e shares the same hardware specification; BASE owners can add the licences with the \u003ca href=\"\/it\/products\/j-link-upgrade-base-to-plus\"\u003eJ-Link Upgrade BASE to PLUS\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link PLUS Classic Compared with ULTRA+ and PRO\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003cth\u003eEthernet\u003c\/th\u003e\n\u003cth\u003ePower over Ethernet\u003c\/th\u003e\n\u003cth\u003eSupported cores\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link PLUS Classic (this product)\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-link-ultra-plus-8-16-28\"\u003eJ-Link ULTRA+ (J-Link Ultra)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-ultra-plus-8-16-28\"\u003e£870\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-link-pro-debugger-programmer-8-12-00\"\u003eJ-Link PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed and 100 Mbit\/s Ethernet\u003c\/td\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003eJ-Link PRO PoE\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed and 100 Mbit\/s Ethernet\u003c\/td\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes, IEEE 802.3af\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSource-level debug of STM32 or NXP Kinetis code running from flash, with more breakpoints than the Cortex-M FPB provides. Programming batches of boards with J-Flash between pilot builds, without buying a separate programming licence. RTT logging during firmware bring-up on a Cortex-M33 or RISC-V board with no free UART.\u003c\/p\u003e\n\u003cp\u003eChoose the ULTRA+ instead if download time or a 50 MHz interface clock matters.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Link PLUS Classic for \u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-j-link-debug-probes\"\u003eSEGGER J-Link debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed: 30 October 2026\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (7 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-plus\/\"\u003eSEGGER J-Link PLUS product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003eSEGGER J-Link BASE product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_PLUS\"\u003eSEGGER Knowledge Base: J-Link PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-ultra\/\"\u003eSEGGER J-Link Ultra product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-pro-poe\/\"\u003eSEGGER J-Link Pro PoE product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base: Using J-Link VCOM functionality\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172047071,"sku":"8.08.28","price":660.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-08-28-40212526891231.jpg?v=1689509114"},{"product_id":"segger-8-08-00-j-link-base-classic","title":"Sonda di debug USB JTAG\/SWD SEGGER J-Link BASE Classic","description":"\u003cp\u003eLa SEGGER J-Link BASE Classic (codice 8.08.00) è una sonda di debug JTAG\/SWD alimentata via USB, in un contenitore da banco di 100mm x 53mm x 27mm, con interfaccia target da 1.2V a 5V, velocità dell'interfaccia target fino a 15 MHz e velocità di download fino a 1 MB\/s. Offre le stesse funzioni J-Link BASE del modello Compact, con una porta host USB Type B. È adatta al bring-up del firmware e al debug quotidiano al banco su target ARM Cortex, RISC-V, Renesas RX e Microchip PIC32.\u003c\/p\u003e\n\n\u003ch2\u003eSonda di debug JTAG\/SWD da banco\u003c\/h2\u003e\n\u003cp\u003eLa Classic è il contenitore J-Link a grandezza piena, 70g senza cavi, pensato per stare accanto alla scheda sul banco. Il collegamento con l'host è USB 2.0 Hi-Speed tramite connettore USB Type B e la sonda è alimentata via USB. Lato target utilizza il connettore J-Link standard a 20 pin da 0.1\" presente sulla maggior parte dei modelli J-Link. Assegnazione dei pin e adattatori disponibili sono descritti nella nostra guida \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003epiedinatura del connettore a 20 pin SEGGER J-Link\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eInterfacce target e core supportati\u003c\/h2\u003e\n\u003cp\u003eL'hardware J-Link BASE attuale supporta JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE e Silicon Labs C2. L'elenco dei core supportati da SEGGER comprende ARM Cortex-M0 fino a Cortex-M85, Cortex-A e Cortex-R, i precedenti ARM7 fino ad ARM1176, core RISC-V di SiFive, Andes, Codasip e Nuclei, Renesas RX, Microchip PIC32 e Silicon Labs EFM8. La sonda può anche alimentare il target a 5V fino a 300mA dalla linea USB.\u003c\/p\u003e\n\n\u003ch2\u003eSupporto di RTT, VCOM e trace buffer\u003c\/h2\u003e\n\u003cp\u003eSEGGER Real Time Transfer (RTT) trasferisce dati tra il target in esecuzione e l'host attraverso la connessione di debug, così potete registrare log o interagire con un'applicazione senza bisogno di una UART libera. Dove è disponibile una UART, la funzione VCOM la collega a una porta COM virtuale sul PC utilizzando i pin 5 (J-Link Tx) e 17 (J-Link Rx) del connettore a 20 pin; VCOM funziona solo durante il debug via SWD. Embedded Trace Buffer (ETB) e Micro Trace Buffer (MTB) sono supportati quando il target li implementa.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware, IDE e percorso di aggiornamento\u003c\/h2\u003e\n\u003cp\u003eIl software J-Link e gli aggiornamenti del firmware sono gratuiti. Il software di configurazione e controllo funziona su Windows (x86-64 e ARM64), Linux (x86-64 e ARM64) e macOS (x86-64 e Apple Silicon). SEGGER indica il supporto completo in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso e Visual Studio Code, tra gli altri. Più J-Link possono funzionare da un unico PC, ciascuno identificato dal proprio numero di serie.\u003c\/p\u003e\n\n\u003ch2\u003eContenuto della confezione\u003c\/h2\u003e\n\u003cp\u003eSonda J-Link BASE Classic, cavo piatto a 20 pin da 0.1\" (18cm) e un cavo USB. Non è incluso alcun adattatore per i connettori Cortex Debug a 10 pin da 0.05\".\u003c\/p\u003e\n\n\u003ch2\u003eSpecifiche\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaccia host\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB Type B\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaccia target\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD a 20 pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfacce di debug supportate\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensione dell'interfaccia target (VIF)\u003c\/th\u003e\n\u003ctd\u003eDa 1.2V a 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCorrente assorbita da VTref\u003c\/th\u003e\n\u003ctd\u003eMeno di 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentazione del target\u003c\/th\u003e\n\u003ctd\u003e5V (derivati da USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVelocità dell'interfaccia target\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFrequenza di campionamento SWO\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVelocità di download\u003c\/th\u003e\n\u003ctd\u003eFino a 1 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentazione\u003c\/th\u003e\n\u003ctd\u003eAlimentata via USB, max. 50mA più la corrente di alimentazione del target\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensioni (senza cavi)\u003c\/th\u003e\n\u003ctd\u003e100mm x 53mm x 27mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePeso (senza cavi)\u003c\/th\u003e\n\u003ctd\u003e70g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTemperatura di esercizio\u003c\/th\u003e\n\u003ctd\u003eDa +5°C a +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTemperatura di stoccaggio\u003c\/th\u003e\n\u003ctd\u003eDa -20°C a +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUmidità relativa\u003c\/th\u003e\n\u003ctd\u003eMax. 90% UR, senza condensa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSistema operativo host\u003c\/th\u003e\n\u003ctd\u003eWindows e Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimiti\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Flash e J-Flash SPI, Unlimited Flash Breakpoints, il debugger Ozone e il pacchetto di licenze RDI non sono inclusi, e SEGGER colloca il debug in modalità monitor nell'upgrade PLUS. Sono forniti con la J-Link PLUS, oppure con la licenza di upgrade da BASE a PLUS per una BASE esistente.\u003c\/li\u003e\n  \u003cli\u003eLa velocità di download arriva fino a 1 MB\/s; SEGGER indica fino a 4 MB\/s per i modelli J-Link di fascia superiore.\u003c\/li\u003e\n  \u003cli\u003eNessun trace ETM (usate SEGGER J-Trace) e nessuna interfaccia target QSPI.\u003c\/li\u003e\n  \u003cli\u003eVCOM è disponibile solo durante il debug via SWD ed è disattivato alla consegna: attivatelo in J-Link Configurator o J-Link Commander, quindi spegnete e riaccendete la sonda.\u003c\/li\u003e\n  \u003cli\u003eSolo USB, senza Ethernet. Per il montaggio all'interno di un'attrezzatura di collaudo, la BASE Compact ha due fori di fissaggio in un contenitore quadrato da 46mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link BASE Classic a confronto con i modelli correlati\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModello\u003c\/th\u003e\n\u003cth\u003eFormato\u003c\/th\u003e\n\u003cth\u003eConnettore host\u003c\/th\u003e\n\u003cth\u003eJ-Flash, Ozone, Unlimited Flash Breakpoints\u003c\/th\u003e\n\u003cth\u003ePrezzo IVA esclusa\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link BASE Classic (questo prodotto)\u003c\/td\u003e\n\u003ctd\u003e100 x 53 x 27mm, 70g\u003c\/td\u003e\n\u003ctd\u003eUSB Type B\u003c\/td\u003e\n\u003ctd\u003eNon inclusi\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-08-00-j-link-base-classic\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-19-00-j-link-base-compact-debugger\"\u003eJ-Link BASE Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, 20g, due fori di fissaggio\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eNon inclusi\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 x 53 x 27mm, 70g\u003c\/td\u003e\n\u003ctd\u003eUSB Type B\u003c\/td\u003e\n\u003ctd\u003eInclusi\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/j-link-upgrade-base-to-plus\"\u003eJ-Link Upgrade BASE to PLUS\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLicenza per una BASE esistente\u003c\/td\u003e\n\u003ctd\u003en\/d\u003c\/td\u003e\n\u003ctd\u003eLi aggiunge\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"j-link-upgrade-base-to-plus\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eApplicazioni tipiche\u003c\/h2\u003e\n\u003cp\u003eDownload in Flash e debug a livello di sorgente di componenti Cortex-M STM32, NXP LPC e Kinetis da STM32CubeIDE o MCUXpresso. Log RTT da un target senza UART libera durante il bring-up del firmware.\u003c\/p\u003e\n\u003cp\u003eScegliete la Classic per il banco; per un'attrezzatura di collaudo o un contenitore, la Compact offre le stesse funzioni in un contenitore quadrato da 46mm.\u003c\/p\u003e\n\n\u003cp\u003eOrdinate la J-Link BASE Classic a \u003cspan data-ds-price=\"segger-8-08-00-j-link-base-classic\"\u003e£470\u003c\/span\u003e IVA esclusa. Verificate il vostro codice componente nell'elenco dei dispositivi supportati da SEGGER, oppure richiedeteci un'offerta formale. Scoprite la gamma completa nella nostra collezione \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003esonde di debug SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eUltima revisione: 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eFonti (5 pagine del produttore)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003ePagina prodotto SEGGER J-Link BASE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_BASE\"\u003eSEGGER Knowledge Base: J-Link BASE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003ePrezzi e licenze SEGGER J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base: uso della funzione VCOM di J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: IDE supportati\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172079839,"sku":"8.08.00","price":470.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-08-00-40212524663007.jpg?v=1689508389"},{"product_id":"segger-j-link-plus-compact-8-19-28","title":"SEGGER J-Link PLUS Compact (8.19.28)","description":"\u003cp\u003eLa SEGGER J-Link PLUS Compact (codice 8.19.28) è una sonda di debug JTAG\/SWD alimentata via USB in un contenitore da 46mm x 46mm x 17mm, con interfaccia target da 1.2V a 5V, velocità dell'interfaccia target fino a 15 MHz e velocità di download fino a 1 MB\/s. Offre lo stesso set di funzioni J-Link PLUS del modello desktop Classic, incluse le licenze per J-Flash, Unlimited Flash Breakpoints, Ozone e RDI, con porta host USB-C e due fori di fissaggio. È adatta a fixture di test, banchi automatici e stazioni di produzione che richiedono debug e programmazione della flash su target ARM Cortex, RISC-V, Renesas RX e Microchip PIC32.\u003c\/p\u003e\n\n\u003ch2\u003eSonda di debug JTAG\/SWD compatta per fixture e banchi\u003c\/h2\u003e\n\u003cp\u003eCon 20g di peso, 46mm di lato e due fori di fissaggio, la PLUS Compact può essere collocata all'interno di contenitori di apparecchiature esistenti, maschere di collaudo e banchi automatici. Il collegamento host è USB 2.0 Hi-Speed su USB-C e la sonda è alimentata da USB. Sul lato target utilizza il connettore standard J-Link a 20 pin da 0.1\"; le assegnazioni dei pin e gli adattatori disponibili sono nella nostra guida \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003epinout del connettore SEGGER J-Link a 20 pin\u003c\/a\u003e. La sonda può alimentare il target con 5V fino a 300mA prelevati dalla linea USB.\u003c\/p\u003e\n\n\u003ch2\u003eLicenze J-Link PLUS incluse sulla sonda\u003c\/h2\u003e\n\u003cp\u003eLa licenza J-Flash è preinstallata sulla sonda, quindi non c'è nulla da attivare. J-Flash programma la flash interna ed esterna senza un IDE. Unlimited Flash Breakpoints consente di impostare breakpoint in flash oltre il numero di breakpoint hardware disponibili nel core. Ozone, il debugger standalone di SEGGER, e la licenza RDI completano il pacchetto. Il debug in monitor mode è supportato sui core ARMv7-M e ARMv8-M.\u003c\/p\u003e\n\n\u003ch2\u003eCore supportati, RTT e VCOM\u003c\/h2\u003e\n\u003cp\u003eLe interfacce di debug supportate sono JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE e Silicon Labs C2. L'elenco dei core supportati da SEGGER per J-Link PLUS comprende ARM da Cortex-M0 a Cortex-M85, Cortex-A e Cortex-R, i core ARM di generazioni precedenti da ARM7 a ARM11, core RISC-V di SiFive, Andes, Codasip e Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 e Cadence Tensilica Xtensa. Real Time Transfer (RTT) trasferisce dati tra il target in esecuzione e l'host attraverso il collegamento di debug. Dove è disponibile una UART, VCOM la collega a una porta COM virtuale tramite i pin 5 (J-Link Tx) e 17 (J-Link Rx) del connettore a 20 pin, durante il debug in SWD.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware e compatibilità con gli IDE\u003c\/h2\u003e\n\u003cp\u003eIl software J-Link è gratuito. Funziona su Windows (x86-64 e ARM64), Linux (x86-64 e ARM64) e macOS (x86-64 e Apple Silicon). SEGGER indica il supporto, tra gli altri, in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso e Visual Studio Code.\u003c\/p\u003e\n\n\u003ch2\u003eContenuto della confezione\u003c\/h2\u003e\n\u003cp\u003eSonda J-Link PLUS Compact, cavo piatto a 20 pin da 0.1\" e cavo USB-C.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifiche\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaccia host\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnettore target\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD a 20 pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfacce di debug supportate\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensione dell'interfaccia target (VIF)\u003c\/th\u003e\n\u003ctd\u003eDa 1.2V a 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCorrente assorbita da VTref\u003c\/th\u003e\n\u003ctd\u003eMeno di 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentazione del target\u003c\/th\u003e\n\u003ctd\u003e5V (derivati da USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVelocità dell'interfaccia target\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFrequenza di campionamento SWO\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVelocità di download\u003c\/th\u003e\n\u003ctd\u003eFino a 1 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentazione\u003c\/th\u003e\n\u003ctd\u003eAlimentazione da USB, max. 50mA più la corrente di alimentazione del target\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLicenze incluse\u003c\/th\u003e\n\u003ctd\u003eJ-Flash (preinstallata), Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensioni (senza cavi)\u003c\/th\u003e\n\u003ctd\u003e46mm x 46mm x 17mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePeso (senza cavi)\u003c\/th\u003e\n\u003ctd\u003e20g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTemperatura di esercizio\u003c\/th\u003e\n\u003ctd\u003eDa +5°C a +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTemperatura di stoccaggio\u003c\/th\u003e\n\u003ctd\u003eDa -20°C a +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUmidità relativa\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, senza condensa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSistema operativo host\u003c\/th\u003e\n\u003ctd\u003eWindows e Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitazioni\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSolo USB. Per l'accesso via Ethernet scelga la J-Link PRO, oppure la J-Link PRO PoE per il Power over Ethernet.\u003c\/li\u003e\n  \u003cli\u003eLa velocità di download arriva fino a 1 MB\/s e quella dell'interfaccia target fino a 15 MHz; i modelli J-Link ULTRA+ e PRO raggiungono fino a 4 MB\/s e 50 MHz.\u003c\/li\u003e\n  \u003cli\u003eNessun trace ETM su Cortex-M (usare SEGGER J-Trace) e nessuna interfaccia target QSPI.\u003c\/li\u003e\n  \u003cli\u003eVCOM è disponibile solo durante il debug in SWD.\u003c\/li\u003e\n  \u003cli\u003eSe serve solo il debug senza le licenze, la \u003ca href=\"\/it\/products\/segger-8-19-00-j-link-base-compact-debugger\"\u003eJ-Link BASE Compact\u003c\/a\u003e condivide lo stesso contenitore e le stesse specifiche hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link PLUS Compact a confronto con i modelli correlati\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModello\u003c\/th\u003e\n\u003cth\u003eFormato\u003c\/th\u003e\n\u003cth\u003eConnettore host\u003c\/th\u003e\n\u003cth\u003eVelocità di download\u003c\/th\u003e\n\u003cth\u003eJ-Flash, Ozone, Unlimited Flash Breakpoints\u003c\/th\u003e\n\u003cth\u003ePrezzo IVA esclusa\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link PLUS Compact (questo prodotto)\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, 20g, due fori di fissaggio\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eFino a 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eIncluse\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-plus-compact-8-19-28\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 x 53 x 27mm, 70g\u003c\/td\u003e\n\u003ctd\u003eUSB Type B\u003c\/td\u003e\n\u003ctd\u003eFino a 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eIncluse\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-19-00-j-link-base-compact-debugger\"\u003eJ-Link BASE Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, 20g, due fori di fissaggio\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eFino a 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eNon incluse\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-link-ultra-plus-8-16-28\"\u003eJ-Link ULTRA+ (J-Link Ultra)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e72 x 45 x 18mm, 40g\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eFino a 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eIncluse\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-ultra-plus-8-16-28\"\u003e£870\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eApplicazioni tipiche\u003c\/h2\u003e\n\u003cp\u003eUna sonda fissata all'interno di una maschera di collaudo, che programma con J-Flash schede STM32 o NXP Kinetis alla fine di una linea pilota. Debug a livello di sorgente di codice Cortex-M eseguito dalla flash, con più breakpoint di quanti ne offra l'FPB del Cortex-M, su un banco dove la sonda resta montata.\u003c\/p\u003e\n\u003cp\u003eScelga la Compact per una fixture o un contenitore; per il banco di lavoro, la PLUS Classic offre le stesse funzioni in un contenitore più grande.\u003c\/p\u003e\n\n\u003cp\u003eOrdini la J-Link PLUS Compact a \u003cspan data-ds-price=\"segger-j-link-plus-compact-8-19-28\"\u003e£660\u003c\/span\u003e IVA esclusa. Verifichi il codice del suo dispositivo nell'elenco dei dispositivi supportati da SEGGER, oppure ci chieda un preventivo formale. Veda l'intera gamma nella nostra collezione \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003esonde di debug SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eUltima revisione: 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eFonti (6 pagine del produttore)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-plus\/\"\u003ePagina prodotto SEGGER J-Link PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_PLUS\"\u003eSEGGER Knowledge Base: J-Link PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003ePrezzi e licenze SEGGER J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-ultra\/\"\u003ePagina prodotto SEGGER J-Link Ultra\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base: utilizzo della funzionalità VCOM di J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: IDE supportati\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172112607,"sku":"8.19.28","price":660.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-19-28-40212529381599.jpg?v=1689508757"},{"product_id":"segger-8-19-00-j-link-base-compact-debugger","title":"SEGGER J-Link BASE Compact Debug Probe","description":"\u003cp\u003eThe SEGGER J-Link BASE Compact (part number 8.19.00) is a USB-powered JTAG\/SWD debug probe in a 46mm x 46mm x 17mm housing, with a 1.2V to 5V target interface, up to 15 MHz target interface speed and download speeds up to 1 MB\/s. It has the same J-Link BASE feature set as the desktop Classic model, with a USB-C host port and two mounting holes so it can stay inside a test fixture or end equipment. It suits firmware bring-up on ARM Cortex, RISC-V, Renesas RX and Microchip PIC32 targets, and fixed debug or programming stations where a full-size probe will not fit.\u003c\/p\u003e\n\n\u003ch2\u003eCompact JTAG\/SWD Debug Probe Built for Fixtures\u003c\/h2\u003e\n\u003cp\u003eAt 20g and 46mm square, with two mounting holes, the Compact is built to be fixed inside equipment housings, test jigs and development systems. The host link is USB 2.0 Hi-Speed over USB-C, and the probe is USB powered. On the target side it uses the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Interfaces and Supported Cores\u003c\/h2\u003e\n\u003cp\u003eCurrent J-Link BASE hardware supports JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2. SEGGER's supported cores list covers ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, legacy ARM7 to ARM1176, RISC-V cores from SiFive, Andes, Codasip and Nuclei, Renesas RX, Microchip PIC32 and Silicon Labs EFM8. The probe can also supply the target with 5V at up to 300mA from the USB rail.\u003c\/p\u003e\n\n\u003ch2\u003eRTT, VCOM and Trace Buffer Support\u003c\/h2\u003e\n\u003cp\u003eSEGGER Real Time Transfer (RTT) moves data between the running target and the host through the debug connection, so you can log or interact with an application without a spare UART. Where a UART is available, the VCOM function bridges it to a virtual COM port on the PC using pins 5 (J-Link Tx) and 17 (J-Link Rx) of the 20-pin connector; VCOM works only when debugging over SWD. Embedded Trace Buffer (ETB) and Micro Trace Buffer (MTB) are supported where the target implements them.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and IDE Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe J-Link software and firmware updates are free. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon). SEGGER lists full support in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso and Visual Studio Code, among others. Several J-Links can run from one PC, each identified by its serial number.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eJ-Link BASE Compact probe, 20-pin 0.1\" ribbon cable and a USB-C cable. No adapter for 10-pin 0.05\" Cortex Debug headers is included.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported debug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V (derived from USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWO sampling frequency\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 50mA plus target supply current\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e46mm x 46mm x 17mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e20g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Flash and J-Flash SPI, Unlimited Flash Breakpoints, the Ozone debugger and the RDI licence pack are not included, and SEGGER lists monitor-mode debugging under the PLUS upgrade. They come with the J-Link PLUS, or with the BASE to PLUS upgrade licence for an existing BASE.\u003c\/li\u003e\n  \u003cli\u003eDownload speed is up to 1 MB\/s; SEGGER quotes up to 4 MB\/s for higher-tier J-Link models.\u003c\/li\u003e\n  \u003cli\u003eNo ETM trace (use SEGGER J-Trace) and no QSPI target interface.\u003c\/li\u003e\n  \u003cli\u003eVCOM is available only when debugging over SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link BASE Compact Compared with Related Models\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003cth\u003eHost connector\u003c\/th\u003e\n\u003cth\u003eJ-Flash, Ozone, Unlimited Flash Breakpoints\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link BASE Compact (this product)\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, 20g, two mounting holes\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-08-00-j-link-base-classic\"\u003eJ-Link BASE Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 x 53 x 27mm, 70g\u003c\/td\u003e\n\u003ctd\u003eUSB Type B\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-08-00-j-link-base-classic\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-link-plus-compact-8-19-28\"\u003eJ-Link PLUS Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, two mounting holes\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-plus-compact-8-19-28\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/j-link-upgrade-base-to-plus\"\u003eJ-Link Upgrade BASE to PLUS\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLicence for an existing BASE\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eAdds them\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"j-link-upgrade-base-to-plus\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eFlash download and source-level debug of STM32, NXP LPC and Kinetis Cortex-M parts from STM32CubeIDE or MCUXpresso. A probe fixed inside a test jig, wired to a 20-pin header, for repeat debug access to Cortex-M33 or RISC-V boards in validation. RTT logging from a target with no free UART during firmware bring-up.\u003c\/p\u003e\n\u003cp\u003eChoose the Compact for a fixture or enclosure; for the bench, the Classic carries the same feature set in a larger housing.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Link BASE Compact for \u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 30\/10\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003eSEGGER J-Link BASE product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_BASE\"\u003eSEGGER Knowledge Base: J-Link BASE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base: Using J-Link VCOM functionality\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172145375,"sku":"8.19.00","price":470.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-19-00-40212528234719.jpg?v=1689509458"},{"product_id":"segger-j-trace-pro-cortex-debugger","title":"SEGGER J-Trace PRO Cortex Trace Debugger","description":"\u003cp\u003eThe SEGGER J-Trace PRO Cortex (part number 8.20.00) is a streaming trace probe for ARM Cortex-A, Cortex-R and Cortex-M devices, with ETM and PTM trace, a USB 3.0 SuperSpeed and Gigabit Ethernet host link, download speeds up to 4.0 MB\/s and a 1.2V to 5V target interface. It combines J-Link debugging with unlimited instruction trace, live code coverage and live code profiling. It suits firmware teams working across Cortex-A, Cortex-R and Cortex-M targets.\u003c\/p\u003e\n\n\u003ch2\u003eStreaming Trace for Cortex-A, Cortex-R and Cortex-M\u003c\/h2\u003e\n\u003cp\u003eStreaming trace sends data continuously to the PC instead of stopping when a buffer fills, so a recording can run long enough to catch a rare fault or a program that ends up stuck in a fault handler. SEGGER's Knowledge Base lists ETM, PTM and ETB trace for ARM Cortex on this model. The supported cores list covers Cortex-A5 to Cortex-A17, Cortex-A53, A55, A57, A72 and A76, Cortex-R4, R5, R8, R52 and R82, Cortex-M0 to Cortex-M85, and SC000 and SC300. RISC-V is not supported; use the J-Trace PRO or J-Trace PRO RISC-V for those targets.\u003c\/p\u003e\n\n\u003ch2\u003eDebug and Trace Connectors\u003c\/h2\u003e\n\u003cp\u003eThe probe has two target connectors: the 20-pin JTAG\/SWD connector used across the J-Link range, with a 14-pin adapter available, and a 19-pin 0.05\" JTAG\/SWD and Trace connector that carries the trace clock and four trace data lines. Targets with a 38-pin Mictor header connect through the \u003ca href=\"\/it\/products\/segger-8-06-21-j-trace-mictor-38-adapter\"\u003eJ-Trace Mictor 38 Adapter\u003c\/a\u003e. Pin assignments for the 20-pin connector are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Supported debug interfaces are JTAG, cJTAG, SWD, SWD multi-drop and SWO, and the probe can supply 5V to the target.\u003c\/p\u003e\n\n\u003ch2\u003eFull J-Link PRO Debug Capability\u003c\/h2\u003e\n\u003cp\u003eJ-Trace PRO Cortex is also a complete J-Link. It includes the full set of J-Link PRO licences, including Unlimited Flash Breakpoints, and supports Real Time Transfer (RTT) and monitor-mode debugging on ARMv7-M and ARMv8-M. SEGGER allows Ozone, its debugger and trace analysis tool, to be used free of charge with a J-Trace PRO, including for commercial use. Ozone is SEGGER's recommended tool for trace analysis; debugging works from any J-Link compatible IDE. Software runs on Windows, Linux and macOS, including ARM64 and Apple Silicon hosts.\u003c\/p\u003e\n\u003cp\u003eThe Ethernet data lines are isolated to IEEE 802.3 (1500 Vrms for one minute). The shield is not, so SEGGER recommends an unshielded twisted pair cable where that isolation matters.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Trace PRO Cortex probe\u003c\/li\u003e\n  \u003cli\u003eCortex-M Trace Reference Board\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.05\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003eMicro USB cable\u003c\/li\u003e\n  \u003cli\u003eUSB 3.0 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 3.0 SuperSpeed; Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin (14-pin adapter available); JTAG\/SWD + Trace 19-pin 0.05\" (38-pin Mictor adapter available)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eStreaming trace; ETM, PTM and ETB (ARM Cortex)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported cores\u003c\/th\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R, Cortex-M, SC000, SC300\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 4.0 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace capacitive load\u003c\/th\u003e\n\u003ctd\u003e3 pF J-Trace plus 8 pF cable (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e123mm x 68mm x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e120g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo RISC-V support; choose the J-Trace PRO or the J-Trace PRO RISC-V.\u003c\/li\u003e\n  \u003cli\u003eTrace needs the target to implement trace hardware and bring the trace pins out to a connector; SEGGER notes that trace setup depends on the target hardware design.\u003c\/li\u003e\n  \u003cli\u003eNo VCOM and no CMSIS-DAP v1 (HID) mode.\u003c\/li\u003e\n  \u003cli\u003eMost IDEs offer little or no trace analysis; plan on Ozone for coverage and profiling.\u003c\/li\u003e\n  \u003cli\u003eThe Mictor 38 adapter is a separate purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace PRO Cortex Compared with the Other J-Trace PRO Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrace architectures\u003c\/th\u003e\n\u003cth\u003eCortex-M Trace Reference Board in box\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace PRO Cortex (this product)\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R and Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-debugger\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R, Cortex-M and RISC-V\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-trace-probe\"\u003e£3,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-trace-pro-cortex-m-8-18-00\"\u003eJ-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1,515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-22-00-j-trace-pro-risc-v\"\u003eJ-Trace PRO RISC-V\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRISC-V (RV32, RV64)\u003c\/td\u003e\n\u003ctd\u003eNot listed\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-22-00-j-trace-pro-risc-v\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003ePTM trace on a Cortex-A9, or ETM trace on a Cortex-A53, application processor to follow program flow into a crash. ETM trace on a Cortex-R5 or Cortex-R52 real-time core to measure interrupt timing over a long run. Live code coverage on a Cortex-M4 or Cortex-M33 microcontroller to show which paths a test suite exercised.\u003c\/p\u003e\n\u003cp\u003eChoose the J-Trace PRO Cortex when your targets include Cortex-A or Cortex-R cores; for Cortex-M only work, compare the J-Trace PRO Cortex-M.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Trace PRO Cortex for \u003cspan data-ds-price=\"segger-j-trace-pro-cortex-debugger\"\u003e£2,005\u003c\/span\u003e ex VAT. Check your device's trace pins, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/models\/j-trace-cortex-arm\/\"\u003eSEGGER J-Trace PRO Cortex-A\/R\/M product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Trace_PRO_Cortex\"\u003eSEGGER Knowledge Base: J-Trace PRO Cortex\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/\"\u003eSEGGER J-Trace model overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172178143,"sku":"8.20.00","price":2005.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-20-00-40235997790431.jpg?v=1689939840"},{"product_id":"segger-j-trace-pro-cortex-m-8-18-00","title":"SEGGER J-Trace PRO Cortex-M Streaming Trace Debugger (8.18.00)","description":"\u003cp\u003eThe SEGGER J-Trace PRO Cortex-M (part number 8.18.00) is a streaming trace probe for ARM Cortex-M microcontrollers, from Cortex-M0 to Cortex-M85, with ETM trace, a USB 3.0 SuperSpeed and Gigabit Ethernet host link, download speeds up to 4.0 MB\/s and a 1.2V to 5V target interface. It combines J-Link debugging with unlimited instruction trace, live code coverage and live code profiling. It suits firmware teams chasing intermittent faults, measuring code coverage or profiling Cortex-M applications.\u003c\/p\u003e\n\n\u003ch2\u003eStreaming ETM Trace for Cortex-M Microcontrollers\u003c\/h2\u003e\n\u003cp\u003eStreaming trace sends data continuously to the PC instead of stopping when a buffer fills, so a recording can run long enough to catch a rare fault or a program that ends up stuck in a fault handler. SEGGER's Knowledge Base lists ETM and ETB trace for Cortex-M on this model. The supported cores list covers Cortex-M0, M0+, M1, M3, M4, M7, M23, M33, M52, M55 and M85, plus SC000 and SC300. Cortex-A and RISC-V cores are not supported.\u003c\/p\u003e\n\n\u003ch2\u003eDebug and Trace Connectors\u003c\/h2\u003e\n\u003cp\u003eThe probe has two target connectors: the 20-pin JTAG\/SWD connector used across the J-Link range, with a 14-pin adapter available, and a 19-pin 0.05\" JTAG\/SWD and Trace connector that carries the trace clock and four trace data lines. Targets with a 38-pin Mictor header connect through the \u003ca href=\"\/it\/products\/segger-8-06-21-j-trace-mictor-38-adapter\"\u003eJ-Trace Mictor 38 Adapter\u003c\/a\u003e. Pin assignments for the 20-pin connector are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Supported debug interfaces are JTAG, cJTAG, SWD, SWD multi-drop and SWO, and the probe can supply 5V to the target.\u003c\/p\u003e\n\n\u003ch2\u003eFull J-Link PRO Debug Capability\u003c\/h2\u003e\n\u003cp\u003eJ-Trace PRO Cortex-M is also a complete J-Link. It includes the full set of J-Link PRO licences, including Unlimited Flash Breakpoints, and supports Real Time Transfer (RTT) and monitor-mode debugging on ARMv7-M and ARMv8-M. SEGGER allows Ozone, its debugger and trace analysis tool, to be used free of charge with a J-Trace PRO, including for commercial use. Ozone is SEGGER's recommended tool for trace analysis; debugging works from any J-Link compatible IDE. Software runs on Windows, Linux and macOS, including ARM64 and Apple Silicon hosts.\u003c\/p\u003e\n\u003cp\u003eThe Ethernet data lines are isolated to IEEE 802.3 (1500 Vrms for one minute). The shield is not, so SEGGER recommends an unshielded twisted pair cable where that isolation matters.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Trace PRO Cortex-M probe\u003c\/li\u003e\n  \u003cli\u003eCortex-M Trace Reference Board\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.05\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003eMicro USB cable\u003c\/li\u003e\n  \u003cli\u003eUSB 3.0 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 3.0 SuperSpeed; Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin (14-pin adapter available); JTAG\/SWD + Trace 19-pin 0.05\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eStreaming trace; ETM and ETB (Cortex-M)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported cores\u003c\/th\u003e\n\u003ctd\u003eARM Cortex-M0 to Cortex-M85, SC000, SC300\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 4.0 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace capacitive load\u003c\/th\u003e\n\u003ctd\u003e3 pF J-Trace plus 8 pF cable (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e123mm x 68mm x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e120g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCortex-M only. For Cortex-A or Cortex-R trace choose the J-Trace PRO Cortex; for RISC-V, the J-Trace PRO or J-Trace PRO RISC-V.\u003c\/li\u003e\n  \u003cli\u003eTrace needs the target to implement ETM and bring the trace pins out to a connector; SEGGER notes that trace setup depends on the target hardware design.\u003c\/li\u003e\n  \u003cli\u003eNo VCOM and no CMSIS-DAP v1 (HID) mode.\u003c\/li\u003e\n  \u003cli\u003eMost IDEs offer little or no trace analysis; plan on Ozone for coverage and profiling.\u003c\/li\u003e\n  \u003cli\u003eThe Mictor 38 adapter is a separate purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace PRO Cortex-M Compared with the Other J-Trace PRO Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrace architectures\u003c\/th\u003e\n\u003cth\u003eCortex-M Trace Reference Board in box\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace PRO Cortex-M (this product)\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1,515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-trace-pro-cortex-debugger\"\u003eJ-Trace PRO Cortex\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R and Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-debugger\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R, Cortex-M and RISC-V\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-trace-probe\"\u003e£3,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-22-00-j-trace-pro-risc-v\"\u003eJ-Trace PRO RISC-V\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRISC-V (RV32, RV64)\u003c\/td\u003e\n\u003ctd\u003eNot listed\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-22-00-j-trace-pro-risc-v\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eInstruction trace on an STM32H7 (Cortex-M7) or i.MX RT1050 board to find an intermittent hard fault after hours of running. Live code coverage on a Cortex-M33 design to show which code paths a test suite exercised. Live profiling of an RTOS application on a Cortex-M4 to find the functions using the most CPU time.\u003c\/p\u003e\n\u003cp\u003eChoose the J-Trace PRO Cortex-M when all your trace targets are Cortex-M microcontrollers.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Trace PRO Cortex-M for \u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1,515\u003c\/span\u003e ex VAT. Check your device's trace pins, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/models\/j-trace\/\"\u003eSEGGER J-Trace PRO Cortex-M product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Trace_PRO_Cortex-M\"\u003eSEGGER Knowledge Base: J-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/adapters\/j-trace-mictor-38-adapter\/\"\u003eSEGGER J-Trace Mictor 38 Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172210911,"sku":"8.18.00","price":1515.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-18-00-40212539080927.jpg?v=1689509285"},{"product_id":"segger-8-22-00-j-trace-pro-risc-v","title":"SEGGER J-Trace PRO RISC-V Debug Probe","description":"\u003cp\u003eThe SEGGER J-Trace PRO RISC-V (part number 8.22.00) is a streaming trace probe for RV32 and RV64 RISC-V cores, using RISC-V N-Trace BTM, with a USB 3.0 SuperSpeed and Gigabit Ethernet host link, download speeds up to 4.0 MB\/s and a 1.2V to 5V target interface. It combines J-Link debugging with unlimited instruction trace, live code coverage and live code profiling. It suits firmware teams bringing up and validating RISC-V microcontrollers and SoCs that implement N-Trace.\u003c\/p\u003e\n\n\u003ch2\u003eStreaming N-Trace for RISC-V Cores\u003c\/h2\u003e\n\u003cp\u003eStreaming trace sends data continuously to the PC instead of stopping when a buffer fills, so a recording can run long enough to catch a rare fault or a program that ends up stuck in a fault handler. SEGGER's Knowledge Base lists N-Trace BTM for RISC-V and supported cores of RV32 and RV64 on this model. Devices without a SEGGER trace reference must implement the RISC-V trace components that SEGGER describes in its N-Trace documentation.\u003c\/p\u003e\n\n\u003ch2\u003eDebug and Trace Connectors\u003c\/h2\u003e\n\u003cp\u003eThe probe has two target connectors: the 20-pin JTAG\/SWD connector used across the J-Link range, with a 14-pin adapter available, and a 19-pin 0.05\" JTAG\/SWD and Trace connector that carries the trace clock and four trace data lines. Pin assignments for the 20-pin connector are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. SEGGER's feature table for this model lists JTAG, cJTAG and SWD debug interfaces, and the probe can supply 5V to the target.\u003c\/p\u003e\n\n\u003ch2\u003eFull J-Link PRO Debug Capability\u003c\/h2\u003e\n\u003cp\u003eJ-Trace PRO RISC-V is also a full J-Link debug probe for RISC-V. It includes the full set of J-Link PRO licences, including Unlimited Flash Breakpoints. SEGGER allows Ozone, its debugger and trace analysis tool, to be used free of charge with a J-Trace PRO, including for commercial use. Ozone is SEGGER's recommended tool for trace analysis; debugging works from any J-Link compatible IDE. Software runs on Windows, Linux and macOS, including ARM64 and Apple Silicon hosts.\u003c\/p\u003e\n\u003cp\u003eThe Ethernet data lines are isolated to IEEE 802.3 (1500 Vrms for one minute). The shield is not, so SEGGER recommends an unshielded twisted pair cable where that isolation matters.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Trace PRO RISC-V probe\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.05\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003eUSB 3.0 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 3.0 SuperSpeed; Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin (14-pin adapter available); JTAG\/SWD + Trace 19-pin 0.05\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eStreaming trace; N-Trace BTM (RISC-V)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported cores\u003c\/th\u003e\n\u003ctd\u003eRISC-V RV32, RV64\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 4.0 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace capacitive load\u003c\/th\u003e\n\u003ctd\u003e3 pF J-Trace plus 8 pF cable (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e123mm x 68mm x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e120g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRISC-V only. SEGGER's feature table for this model lists no ARM ETM, PTM or ETB trace, no SWO and no ARM monitor-mode debugging; for ARM and RISC-V in one probe, choose the J-Trace PRO.\u003c\/li\u003e\n  \u003cli\u003eNo SWD multi-drop, VCOM or CMSIS-DAP v1 (HID) mode.\u003c\/li\u003e\n  \u003cli\u003eTrace needs the target to implement N-Trace and bring the trace pins out to a connector; SEGGER notes that trace setup depends on the target hardware design.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's package list for this model does not include the Cortex-M Trace Reference Board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace PRO RISC-V Compared with the Other J-Trace PRO Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrace architectures\u003c\/th\u003e\n\u003cth\u003eCortex-M Trace Reference Board in box\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace PRO RISC-V (this product)\u003c\/td\u003e\n\u003ctd\u003eRISC-V (RV32, RV64)\u003c\/td\u003e\n\u003ctd\u003eNot listed\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-22-00-j-trace-pro-risc-v\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R, Cortex-M and RISC-V\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-trace-probe\"\u003e£3,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-trace-pro-cortex-debugger\"\u003eJ-Trace PRO Cortex\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R and Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-debugger\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-trace-pro-cortex-m-8-18-00\"\u003eJ-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1,515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eInstruction trace on an RV32 microcontroller to find the code path that leads to an intermittent exception. Live code coverage on an RV64 core to show which paths a test suite exercised before release. Trace on a SiFive core bitstream on an ARTY board, connected through the \u003ca href=\"\/it\/products\/segger-8-06-35-sifive-arty-trace-adapter\"\u003eSiFive-ARTY Trace Adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eChoose the J-Trace PRO RISC-V when all your trace targets are RISC-V.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Trace PRO RISC-V for \u003cspan data-ds-price=\"segger-8-22-00-j-trace-pro-risc-v\"\u003e£2,005\u003c\/span\u003e ex VAT. Check that your device implements N-Trace with the trace pins connected, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/models\/j-trace-pro-risc-v\/\"\u003eSEGGER J-Trace PRO RISC-V product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Trace_PRO_RISC-V\"\u003eSEGGER Knowledge Base: J-Trace PRO RISC-V\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/RISC-V_N-Trace\"\u003eSEGGER Knowledge Base: RISC-V N-Trace\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172243679,"sku":"8.22.00","price":2005.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-22-00-40212577452255.jpg?v=1689939145"},{"product_id":"segger-8-06-29-5v-target-supply-adapter","title":"SEGGER 5V Target Supply Adapter","description":"\u003cp\u003eThe SEGGER 5V Target Supply Adapter (part number 8.06.29) powers the target board with 5V ±5% on pin 19 of the debug cable, rated by SEGGER at 5V and 500mA output current, with a 220µF maximum capacitive load and a 2 to 6 ms output ramp. It plugs directly between a J-Link or Flasher and the debug cable and keeps a 1:1 connection of all debug signals. It suits bench debug and production programming of 5V boards that should take their supply from the probe side rather than a separate bench supply.\u003c\/p\u003e\n\n\u003ch2\u003eFixed 5V Target Power Inline With the Debug Cable\u003c\/h2\u003e\n\u003cp\u003eThe adapter sits on the standard J-Link 20-pin 0.1\" connector found on most J-Link models, between the probe and its ribbon cable. Every debug signal passes straight through; only the supply on pin 19 is added, so JTAG or SWD wiring to the target does not change. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eOutput Current and Probe Drive\u003c\/h2\u003e\n\u003cp\u003eSEGGER quotes two current figures: 500mA output current at 5V, and 220mA at 5V as the maximum output current, which SEGGER marks as drive-dependent. Plan target load against the lower figure unless you have measured otherwise. The output ramps up within 2 to 6 ms and tolerates up to 220µF of capacitance on the target rail.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutput voltage\u003c\/th\u003e\n\u003ctd\u003e5V ±5%\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutput current\u003c\/th\u003e\n\u003ctd\u003e5V \/ 500mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. output current (drive-dependent)\u003c\/th\u003e\n\u003ctd\u003e5V \/ 220mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. capacitive load\u003c\/th\u003e\n\u003ctd\u003e220µF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRamp time (output)\u003c\/th\u003e\n\u003ctd\u003e2 to 6 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupply pin\u003c\/th\u003e\n\u003ctd\u003ePin 19 of the debug cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug signals\u003c\/th\u003e\n\u003ctd\u003e1:1 connection of all signals\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter; the order is for the 5V Target Supply Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOne output voltage. SEGGER's product page states the supply is fixed at 5V; SEGGER's shop listing adds that it can be changed by replacing resistors. For other voltages, the Target Supply Adapter covers 0.8V to 3.6V (3.3V default, set by changing one resistor).\u003c\/li\u003e\n  \u003cli\u003eUsable current depends on the driving probe; SEGGER's drive-dependent maximum is 220mA at 5V.\u003c\/li\u003e\n  \u003cli\u003eIt supplies the target only. To set the probe's I\/O voltage on a board with no VTref, use the Supply Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e5V Target Supply Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it supplies\u003c\/th\u003e\n\u003cth\u003eRange and current\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e5V Target Supply Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eTarget supply on pin 19\u003c\/td\u003e\n\u003ctd\u003eFixed 5V ±5%, 500mA (220mA drive-dependent)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-29-5v-target-supply-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-18-target-supply-adapter\"\u003eTarget Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable target supply\u003c\/td\u003e\n\u003ctd\u003e0.8V to 3.6V, max. 400mA at 3.3V and 3.6V\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-14-supply-adapter\"\u003eSupply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eI\/O voltage in place of target VTref\u003c\/td\u003e\n\u003ctd\u003e1.2V to 5.0V, manually adjustable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-30-programming-voltage-adapter\"\u003eProgramming Voltage Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo independent voltages, programming voltage on pin 17\u003c\/td\u003e\n\u003ctd\u003e4V to 20V, up to 500mA\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-30-programming-voltage-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the 5V Target Supply Adapter for \u003cspan data-ds-price=\"segger-8-06-29-5v-target-supply-adapter\"\u003e£130\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (7 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/5v-target-supply-adapter\/\"\u003eSEGGER 5V Target Supply Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/5v-target-supply-adapter\"\u003eSEGGER shop: 5V Target Supply Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/target-supply-adapter\/\"\u003eSEGGER Target Supply Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/supply-adapter\/\"\u003eSEGGER Supply Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/programming-voltage-adapter\/\"\u003eSEGGER Programming Voltage Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172276447,"sku":"8.06.29","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-29-40212885799135.jpg?v=1689520085"},{"product_id":"segger-8-06-11-2mm-adapter","title":"SEGGER 2mm Adapter","description":"\u003cp\u003eThe SEGGER 2mm Adapter (part number 8.06.11) adapts the standard J-Link 20-pin 0.1\" connector to a 20-pin connector at 2mm pitch. It is a 1:1 adapter: SEGGER states that the pinout of the 2mm pitch connector is identical to the standard 20-pin connector, so every signal stays on the same pin number. It is for target boards fitted with a 20-pin 2mm debug header, where the 0.1\" J-Link ribbon will not mate.\u003c\/p\u003e\n\n\u003ch2\u003eSame 20-Pin J-Link Pinout on a 2mm Pitch Header\u003c\/h2\u003e\n\u003cp\u003eThe adapter fits the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Because the mapping is 1:1, a target designed to the J-Link 20-pin assignment needs no rewiring when the header is 2mm pitch, and JTAG and SWD connections work exactly as on a 0.1\" header. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the 2mm Adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e20-pin, 2mm pitch\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePin mapping\u003c\/th\u003e\n\u003ctd\u003e1:1, pinout identical to the standard 20-pin connector\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter; the order is for the 2mm Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo pin remapping. For a target with a non-standard pinout, the 50-Mil 10-Pin Patch Adapter allows custom wiring.\u003c\/li\u003e\n  \u003cli\u003eIt does not suit 0.05\" Cortex-M headers; use the 9-Pin or 19-Pin Cortex-M Adapter.\u003c\/li\u003e\n  \u003cli\u003eThe 14-pin 2mm Xilinx JTAG connector needs the Xilinx Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER does not publish dimensions or connector gender for the 2mm side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e2mm Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003ePin mapping\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e2mm Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e20-pin, 2mm pitch\u003c\/td\u003e\n\u003ctd\u003e1:1 with J-Link 20-pin\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-11-2mm-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-19-xilinx-adapter\"\u003eXilinx Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin, 2mm Xilinx JTAG\u003c\/td\u003e\n\u003ctd\u003eXilinx JTAG\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-9-pin-cortex-m-adapter-8-06-02\"\u003e9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e9-pin, 0.05\" Samtec FTSH\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin, 0.05\"\u003c\/td\u003e\n\u003ctd\u003eCustom wiring possible\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the 2mm Adapter for \u003cspan data-ds-price=\"segger-8-06-11-2mm-adapter\"\u003e£60\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/2mm-adapter\/\"\u003eSEGGER 2mm Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/2mm-adapter\"\u003eSEGGER shop: 2mm Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/xilinx-adapter\/\"\u003eSEGGER Xilinx Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172309215,"sku":"8.06.11","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-11-40212741292255.jpg?v=1689515939"},{"product_id":"segger-j-link-6-pin-needle-adapter-8-06-16","title":"SEGGER J-Link 6-Pin Needle Adapter (8.06.16)","description":"\u003cp\u003eThe SEGGER 6-Pin Needle Adapter (part number 8.06.16) connects a J-Link or Flasher to a PCB that has no mating connector or programming header, adapting the standard 20-pin 0.1\" connector to a 6-pin, 0.05\" needle pattern. Spring pins land on pads in the target footprint, and three locating pins stop the adapter being fitted the wrong way round. It is the smaller of SEGGER's two needle adapters, for SWD programming and debug on boards where even the 10-pin needle footprint takes too much space.\u003c\/p\u003e\n\n\u003ch2\u003eSWD Access Without a Connector on the PCB\u003c\/h2\u003e\n\u003cp\u003eNo additional connector is needed on the target, only the 6-pin footprint, which SEGGER states is smaller than that of the 10-Pin Needle Adapter. The six needles carry VTref, SWDIO, nRESET, SWCLK, GND and SWO (pins 1 to 6 in SEGGER's pinout drawing). The adapter has high-reliability spring pins for secure contact, three locating pins for positioning, and two support legs on each side that can be cut off if space is tight. Lay out the pads to SEGGER's \u003ca href=\"\/it\/pages\/resources\/segger-j-link-6-pin-needle-cable-drawing\"\u003e6-pin footprint drawing\u003c\/a\u003e and its layout notes: no solder paste on the contact pads, and no other track within 0.02\" of a pad.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eThe probe side is the standard J-Link 20-pin 0.1\" connector found on most J-Link models. SEGGER lists the 6-Pin Needle Adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link WiFi, J-Link PLUS Compact and J-Link BASE Compact. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e6-pin, 0.05\" needle pattern (no connector fitted)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals (pin)\u003c\/th\u003e\n\u003ctd\u003eVTref (1), SWDIO (2), nRESET (3), SWCLK (4), GND (5), SWO (6)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eContacts\u003c\/th\u003e\n\u003ctd\u003eHigh-reliability spring pins\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePositioning\u003c\/th\u003e\n\u003ctd\u003e3 locating pins; 2 support legs each side (can be cut off)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003ctd\u003eSEGGER 6-pin needle footprint, 0.05\" pad pitch; SEGGER's drawing lists Tag-Connect part TC2030-IDC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eOne 6-pin Needle Adapter and one 6-pin cable with pins and legs. No J-Link or Flasher is included.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo JTAG. SEGGER states the 6 pins are not enough for JTAG and points to the 10-Pin Needle Adapter instead.\u003c\/li\u003e\n  \u003cli\u003eNo target supply pin. The 10-Pin Needle Adapter adds a 5V-Supply pin, so the target can be powered from J-Link or Flasher.\u003c\/li\u003e\n  \u003cli\u003eThe target PCB must carry SEGGER's 6-pin needle footprint.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's suitable-products list for this adapter does not include J-Link Ultra or the Classic models, although they have the same 20-pin connector. Ask us before ordering for one of those.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e6-Pin Needle Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e6-Pin Needle Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e6-pin, 0.05\" needle pattern\u003c\/td\u003e\n\u003ctd\u003eSWD with SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-6-pin-needle-adapter-8-06-16\"\u003e£110\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-04-10-pin-needle-adapter\"\u003e10-Pin Needle Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin, 0.05\" needle pattern\u003c\/td\u003e\n\u003ctd\u003eJTAG and SWD signals, optional target power\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-04-10-pin-needle-adapter\"\u003e£114\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-9-pin-cortex-m-adapter-8-06-02\"\u003e9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e9-pin, 0.05\" Samtec FTSH header\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the 6-Pin Needle Adapter for \u003cspan data-ds-price=\"segger-j-link-6-pin-needle-adapter-8-06-16\"\u003e£110\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/6-pin-needle-adapter\/\"\u003eSEGGER 6-Pin Needle Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/6-pin-needle-adapter\"\u003eSEGGER shop: 6-Pin Needle Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/10-pin-needle-adapter\/\"\u003eSEGGER 10-Pin Needle Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172341983,"sku":"8.06.16","price":110.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-16-40213023555807.jpg?v=1689526381"},{"product_id":"segger-8-06-03-14-pin-ti-adapter","title":"SEGGER 14-Pin TI Adapter with Cable","description":"\u003cp\u003eThe SEGGER 14-Pin TI Adapter (part number 8.06.03) connects a J-Link or Flasher to target hardware with a TI MCU and the 14-pin JTAG connector defined by TI, adapting the 20-pin 0.1\" connector to a 14-pin 0.1\" JTAG connector. SEGGER gives the BeagleBoard with an OMAP3530 as an example target, and its Knowledge Base page for the TI AM3517 says the probe can be connected using this adapter. SEGGER's shop lists it with a 14-pin cable.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link JTAG on TI 14-Pin Boards\u003c\/h2\u003e\n\u003cp\u003eThe adapter takes the standard J-Link 20-pin 0.1\" connector found on most J-Link models and routes JTAG to the TI layout. SEGGER's schematic shows VTref, TRST, TDI, TMS, TCK, RTCK and TDO, with connection points for EMU0 and EMU1. That lets a J-Link that already serves Cortex-M work on your bench also debug TI application processors on evaluation boards, without a second probe. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the 14-Pin TI Adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eTI 14-pin JTAG, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals (SEGGER schematic)\u003c\/th\u003e\n\u003ctd\u003eVTref, TRST, TDI, TMS, TCK, RTCK, TDO; EMU0 and EMU1 connection points\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExample targets\u003c\/th\u003e\n\u003ctd\u003eBeagleBoard (OMAP3530); TI AM3517\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e14-Pin TI Adapter\u003c\/li\u003e\n  \u003cli\u003e14-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs listed in SEGGER's shop (\"incl. 14-pin cable\").\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJTAG only; SEGGER's schematic shows no SWD signals for this adapter.\u003c\/li\u003e\n  \u003cli\u003eIt fits the TI 14-pin 0.1\" connector only. Boards with the TI CTI-20 connector need the TI-CTI-20 Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no electrical or mechanical specification for the adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e14-Pin TI Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eTypical targets\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e14-Pin TI Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eTI 14-pin JTAG, 0.1\"\u003c\/td\u003e\n\u003ctd\u003eTI MCUs, e.g. BeagleBoard with OMAP3530\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-03-14-pin-ti-adapter\"\u003e£62\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-06-ti-cti-20-adapter\"\u003eTI-CTI-20 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTI CTI-20\u003c\/td\u003e\n\u003ctd\u003eTI eval boards with CTI-20, e.g. AM335x EVM\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-06-ti-cti-20-adapter\"\u003e£78\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-39-stdc-14-adapter-uk\"\u003eSTDC 14 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin, 0.05\" defined by ST\u003c\/td\u003e\n\u003ctd\u003eST targets\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-39-stdc-14-adapter-uk\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-19-xilinx-adapter\"\u003eXilinx Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin, 2mm Xilinx JTAG\u003c\/td\u003e\n\u003ctd\u003eCortex-A9 in Zynq devices\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the 14-Pin TI Adapter for \u003cspan data-ds-price=\"segger-8-06-03-14-pin-ti-adapter\"\u003e£62\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/14-pin-ti-adapter\/\"\u003eSEGGER 14-Pin TI Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/14-pin-ti-adapter\"\u003eSEGGER shop: 14-Pin TI Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/TI_AM3517\"\u003eSEGGER Knowledge Base: TI AM3517\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/ti-cti-20-adapter\/\"\u003eSEGGER TI-CTI-20 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/stdc14-adapter\/\"\u003eSEGGER STDC14 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/xilinx-adapter\/\"\u003eSEGGER Xilinx Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172374751,"sku":"8.06.03","price":62.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-03-40215942758623.jpg?v=1689588121"},{"product_id":"segger-9-pin-cortex-m-adapter-8-06-02","title":"SEGGER 9-Pin Cortex-M Adapter (SKU 8.06.02)","description":"\u003cp\u003eThe SEGGER 9-Pin Cortex-M Adapter (part number 8.06.02) connects a J-Link or Flasher to Cortex-M target hardware for JTAG, SWD and SWO, adapting the 20-pin 0.1\" JTAG connector to the 9-pin 0.05\" Samtec FTSH connector defined by ARM. TRST is not connected by default, and solder bridge NR1 connects it to pin 9 when a target needs it. SEGGER's shop lists the adapter with a 9-pin cable, and it also serves non-Cortex-M targets that use the same pinout.\u003c\/p\u003e\n\n\u003ch2\u003eDebug Fine-Pitch Cortex-M Headers From a 20-Pin J-Link\u003c\/h2\u003e\n\u003cp\u003eSome Cortex-M boards carry only the 9-pin 0.05\" debug header. This adapter lets the standard J-Link 20-pin 0.1\" connector found on most J-Link models reach it, carrying JTAG, SWD and the SWO output on the same connector. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003e9-Pin Connector Pinout\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVTref\u003c\/td\u003e\n\u003ctd\u003eTarget reference voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO \/ TMS\u003c\/td\u003e\n\u003ctd\u003eSWD data or JTAG TMS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e3, 5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK \/ TCK\u003c\/td\u003e\n\u003ctd\u003eSWD clock or JTAG TCK\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO \/ TDO\u003c\/td\u003e\n\u003ctd\u003eSWO (optional for SWD) or JTAG TDO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eNot present on this connector\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eNC \/ TDI\u003c\/td\u003e\n\u003ctd\u003eNot used in SWD; JTAG TDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eNC (TRST)\u003c\/td\u003e\n\u003ctd\u003eConnected to TRST only when NR1 is closed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003ctd\u003eActive-low target reset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported connections\u003c\/th\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003e20-pin, 0.1\" JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e9-pin, 0.05\" Samtec FTSH, as defined by ARM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTRST\u003c\/th\u003e\n\u003ctd\u003eNot connected by default; solder bridge NR1 connects it to pin 9\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable probes\u003c\/th\u003e\n\u003ctd\u003eFlasher Pro, Pro XL, Compact, Portable PLUS; J-Link Pro PoE, Pro, WiFi, PLUS Compact, BASE Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e9-Pin Cortex-M Adapter\u003c\/li\u003e\n  \u003cli\u003e9-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs listed in SEGGER's shop (\"incl. 9-pin cable\").\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo trace beyond SWO. For Cortex-M ETM trace, the 19-pin connector on a J-Trace PRO is needed.\u003c\/li\u003e\n  \u003cli\u003eThe J-Link 5V target supply is not available on the 9-pin connector; SEGGER notes that it does not support this feature.\u003c\/li\u003e\n  \u003cli\u003eTRST needs the NR1 solder bridge closed.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's suitable-products list for this adapter does not include J-Link Ultra or the Classic models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e9-Pin Cortex-M Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e9-Pin Cortex-M Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e9-pin, 0.05\" Samtec FTSH\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-00-19-pin-cortex-m-adapter\"\u003e19-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19-pin, 0.05\" Samtec FTSH\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-00-19-pin-cortex-m-adapter\"\u003e£38\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin, 0.05\" Cortex-M\u003c\/td\u003e\n\u003ctd\u003eCustom wiring for non-standard pinouts\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-04-10-pin-needle-adapter\"\u003e10-Pin Needle Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin needle pattern, no header\u003c\/td\u003e\n\u003ctd\u003eJTAG and SWD signals\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-04-10-pin-needle-adapter\"\u003e£114\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the 9-Pin Cortex-M Adapter for \u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/9-pin-cortex-m-adapter\/\"\u003eSEGGER 9-Pin Cortex-M Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/9-pin-cortex-m-adapter\"\u003eSEGGER shop: 9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/9-pin_JTAG\/SWD_connector\"\u003eSEGGER Knowledge Base: 9-pin JTAG\/SWD connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08001_J-Link_\/_J-Trace_User_Guide\"\u003eSEGGER Knowledge Base: J-Link \/ J-Trace User Guide (UM08001)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Debug_Connectors\"\u003eSEGGER Knowledge Base: Debug Connectors\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172440287,"sku":"8.06.02","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-02-40212738736351.jpg?v=1689515228"},{"product_id":"segger-8-06-04-10-pin-needle-adapter","title":"SEGGER 10-Pin Needle Adapter for J-Link Debug Programming","description":"\u003cp\u003eThe SEGGER 10-Pin Needle Adapter (part number 8.06.04) connects a J-Link or Flasher to a PCB that has no mating connector or programming header, adapting the standard 20-pin 0.1\" connector to a 10-pin, 0.05\" TAG-Connect needle pattern. Spring pins contact pads in the target footprint, three locating pins prevent a wrong connection, and the adapter can power the target from the J-Link or Flasher. It serves firmware bring-up and production programming on boards where a debug header would cost space and parts.\u003c\/p\u003e\n\n\u003ch2\u003eJTAG and SWD on a Header-Free Footprint\u003c\/h2\u003e\n\u003cp\u003eNo additional connector is needed on the PCB, and the footprint is very small. SEGGER's schematic labels the needle signals VTref, TRST, SWCLK\/TCK, SWDIO\/TMS, SWO\/TDO, TDI, RTCK, RESET and VSUPPLY, so the adapter carries JTAG as well as SWD; SEGGER directs JTAG users to this adapter rather than the 6-pin version. High-reliability spring pins give a secure connection, and two support legs on each side steady the adapter; they can be cut off if space is tight. Lay out the pads to SEGGER's footprint specification and PCB layout guidelines.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Power From the Probe\u003c\/h2\u003e\n\u003cp\u003eNo external power supply is needed: the adapter has the option to power the target hardware via J-Link or Flasher. The probe side is the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e10-pin, 0.05\" TAG-Connect needle pattern (no connector fitted)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals (SEGGER schematic)\u003c\/th\u003e\n\u003ctd\u003eVTref, TRST, SWCLK\/TCK, SWDIO\/TMS, SWO\/TDO, TDI, RTCK, RESET, VSUPPLY\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget power\u003c\/th\u003e\n\u003ctd\u003eOptional, via J-Link or Flasher\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eContacts\u003c\/th\u003e\n\u003ctd\u003eHigh-reliability spring pins\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePositioning\u003c\/th\u003e\n\u003ctd\u003e3 locating pins; 2 support legs each side (can be cut off)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter; the order is for the 10-Pin Needle Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe target PCB must carry SEGGER's 10-pin needle footprint.\u003c\/li\u003e\n  \u003cli\u003eThe footprint is larger than the 6-pin needle version; for SWD only on the tightest boards, the 6-Pin Needle Adapter is smaller.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no contact cycle rating or current figure for the adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10-Pin Needle Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e10-Pin Needle Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e10-pin, 0.05\" needle pattern\u003c\/td\u003e\n\u003ctd\u003eJTAG and SWD signals, optional target power\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-04-10-pin-needle-adapter\"\u003e£114\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-j-link-6-pin-needle-adapter-8-06-16\"\u003e6-Pin Needle Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e6-pin, 0.05\" needle pattern\u003c\/td\u003e\n\u003ctd\u003eSWD with SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-6-pin-needle-adapter-8-06-16\"\u003e£110\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-9-pin-cortex-m-adapter-8-06-02\"\u003e9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e9-pin, 0.05\" Samtec FTSH header\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin, 0.05\" header\u003c\/td\u003e\n\u003ctd\u003eCustom wiring for non-standard pinouts\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the 10-Pin Needle Adapter for \u003cspan data-ds-price=\"segger-8-06-04-10-pin-needle-adapter\"\u003e£114\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/10-pin-needle-adapter\/\"\u003eSEGGER 10-Pin Needle Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/10-pin-needle-adapter\"\u003eSEGGER shop: 10-Pin Needle Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/6-pin-needle-adapter\/\"\u003eSEGGER 6-Pin Needle Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172473055,"sku":"8.06.04","price":114.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-04-40212885340383.jpg?v=1689520082"},{"product_id":"segger-8-06-28-50-mil-10-pin-patch-adapter","title":"SEGGER 0.1\" To 50-mil 10-Pin Patch Adapter","description":"\u003cp\u003eThe SEGGER 50-Mil 10-Pin Patch Adapter (part number 8.06.28) adapts the standard 20-pin 0.1\" J-Link connector to the standard 10-pin 0.05\" Cortex-M connector, and allows custom connections and wiring between the 20-pin and 10-pin sides. SEGGER notes that the 10-pin 0.05\" connector also appears on many non-Cortex-M designs with a non-standard pinout; the patch connection is how a J-Link reaches those boards. It suits bring-up of custom or legacy hardware whose debug header does not follow the ARM assignment.\u003c\/p\u003e\n\n\u003ch2\u003eCustom Wiring Between the 20-Pin and 10-Pin Sides\u003c\/h2\u003e\n\u003cp\u003eA fixed adapter only works when the target follows the standard pinout. The Patch Adapter lets you route each signal from the J-Link side to whichever pin the target uses on its 10-pin 0.05\" header, so a board with an in-house or vendor-specific assignment can still be debugged without a custom cable. The probe side is the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the Patch Adapter as suitable for Flasher ARM, and for J-Link Pro PoE, J-Link Pro, J-Link WiFi, J-Link PLUS Compact and J-Link BASE Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e10-pin, 0.05\" Cortex-M connector\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003eCustom connections between the 20-pin and 10-pin sides\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable probes\u003c\/th\u003e\n\u003ctd\u003eFlasher ARM; J-Link Pro PoE, Pro, WiFi, PLUS Compact, BASE Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter; the order is for the 50-Mil 10-Pin Patch Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER publishes no pinout, wiring scheme or mechanical drawing for the patch field; plan the routing from your target's documentation.\u003c\/li\u003e\n  \u003cli\u003eFor a target that follows the ARM 9-pin Cortex-M assignment, the fixed 9-Pin Cortex-M Adapter needs no wiring.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's suitable-products list for this adapter does not include J-Link Ultra or the Classic models, and names Flasher ARM as the only Flasher.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e50-Mil 10-Pin Patch Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connection\u003c\/th\u003e\n\u003cth\u003ePin mapping\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e50-Mil 10-Pin Patch Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e10-pin, 0.05\" header\u003c\/td\u003e\n\u003ctd\u003eCustom wiring\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-9-pin-cortex-m-adapter-8-06-02\"\u003e9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e9-pin, 0.05\" Samtec FTSH\u003c\/td\u003e\n\u003ctd\u003eFixed, ARM Cortex-M\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-27-flying-wire-adapter\"\u003eFlying Wire Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin row for flying wires\u003c\/td\u003e\n\u003ctd\u003eWire to any target point\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-13-measurement-patch-adapter\"\u003eMeasurement Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eColour-coded jumper wires and test points\u003c\/td\u003e\n\u003ctd\u003eCustom wiring, signal checks\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the 50-Mil 10-Pin Patch Adapter for \u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/segger-50-mil-10-pin-patch-adapter\/\"\u003eSEGGER 50-Mil 10-Pin Patch Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/50-mil-10-pin-patch-adapter\"\u003eSEGGER shop: 50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/9-pin-cortex-m-adapter\/\"\u003eSEGGER 9-Pin Cortex-M Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/segger-flying-wire-adapter\/\"\u003eSEGGER Flying Wire Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/measurement-patch-adapter\/\"\u003eSEGGER Measurement+Patch Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172505823,"sku":"8.06.28","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-28-40212735230175.jpg?v=1689515049"},{"product_id":"segger-8-06-15-intel-fpga-adapter","title":"SEGGER Intel FPGA Adapter","description":"\u003cp\u003eThe SEGGER Intel FPGA Adapter (part number 8.06.15, formerly the J-Link Altera Adapter) connects a J-Link or Flasher to the 10-pin 100-mil Intel FPGA JTAG connector, giving debug access to MCU cores inside the FPGA such as the dual-core ARM Cortex-A9 in Cyclone V devices. SEGGER's shop lists it with a 10-pin ribbon cable. It is for firmware engineers debugging the hard processor system on Intel SoC FPGA boards with the J-Link they already use.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link Debug for Cortex-A9 Cores in Intel SoC FPGAs\u003c\/h2\u003e\n\u003cp\u003eThe adapter converts the standard J-Link 20-pin 0.1\" connector found on most J-Link models to the Intel FPGA 10-pin JTAG layout. SEGGER's schematic shows VTref, TRST, TDI, TMS, TCK, TDO and RESET. SEGGER's Knowledge Base page for the Arria 10 SoC Development Kit lists the board's JTAG connector J24 as connected \"via Intel FPGA Adapter\", so the same adapter covers Cyclone V and Arria 10 SoC development hardware. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the Intel FPGA Adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eIntel FPGA 10-pin, 100-mil JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals (SEGGER schematic)\u003c\/th\u003e\n\u003ctd\u003eVTref, TRST, TDI, TMS, TCK, TDO, RESET\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExample targets\u003c\/th\u003e\n\u003ctd\u003eCyclone V (dual-core ARM Cortex-A9); Arria 10 SoC Development Kit (J24)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFormer name\u003c\/th\u003e\n\u003ctd\u003eJ-Link Altera Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIntel FPGA Adapter\u003c\/li\u003e\n  \u003cli\u003e10-pin ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs listed in SEGGER's shop (\"Incl. 10 pin ribbon cable\").\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJTAG only; SEGGER's schematic shows no SWD signals.\u003c\/li\u003e\n  \u003cli\u003eSEGGER describes it for debug access to MCU cores in the FPGA; it does not list FPGA configuration.\u003c\/li\u003e\n  \u003cli\u003eFor the 14-pin 2mm Xilinx JTAG connector (Zynq), use the Xilinx Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIntel FPGA Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eTypical targets\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIntel FPGA Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e10-pin, 100-mil Intel FPGA JTAG\u003c\/td\u003e\n\u003ctd\u003eCortex-A9 in Cyclone V\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-15-intel-fpga-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-19-xilinx-adapter\"\u003eXilinx Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin, 2mm Xilinx JTAG\u003c\/td\u003e\n\u003ctd\u003eCortex-A9 in Zynq\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-03-14-pin-ti-adapter\"\u003e14-Pin TI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTI 14-pin JTAG, 0.1\"\u003c\/td\u003e\n\u003ctd\u003eTI MCUs, e.g. OMAP3530\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-03-14-pin-ti-adapter\"\u003e£62\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-27-flying-wire-adapter\"\u003eFlying Wire Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin row for flying wires\u003c\/td\u003e\n\u003ctd\u003ePrototypes, non-standard pinouts\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Intel FPGA Adapter for \u003cspan data-ds-price=\"segger-8-06-15-intel-fpga-adapter\"\u003e£60\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/intel-fpga-adapter\/\"\u003eSEGGER Intel FPGA Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/intel-fpga-adapter\"\u003eSEGGER shop: Intel FPGA Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Arria_10_SoC_Development_Kit\"\u003eSEGGER Knowledge Base: Arria 10 SoC Development Kit\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/xilinx-adapter\/\"\u003eSEGGER Xilinx Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172571359,"sku":"8.06.15","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-15-40212883308767.jpg?v=1689520088"},{"product_id":"segger-8-06-27-flying-wire-adapter","title":"SEGGER Flying Wire Adapter","description":"\u003cp\u003eThe SEGGER Flying Wire Adapter (part number 8.06.27) adapts the standard 20-pin 0.1\" J-Link connector to a 10-pin row, so a J-Link or Flasher can be wired to a target PCB with flying wires. SEGGER describes it as especially useful for prototype hardware where no final debug connector has been chosen yet, and for connecting a J-Link by hand to ST Discovery boards. It suits early bring-up, when the debug signals sit on test points or pin headers in no standard order.\u003c\/p\u003e\n\n\u003ch2\u003eWire J-Link to Any Target Point\u003c\/h2\u003e\n\u003cp\u003eInstead of a fixed connector, the adapter breaks the J-Link signals out to a 10-pin row, and each wire goes wherever the target exposes that signal. SEGGER's schematic shows VTref, TRST, TDI, TMS, TCK, RTCK, TDO, RESET, pin 17 and VSUPPLY on the 10-pin row, with GND on a separate 3-pin header. The board is printed TMS\/SWDIO, TCK\/SWCLK and TDO\/SWO, so the same row serves JTAG and SWD wiring. The probe side is the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the Flying Wire Adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e10-pin signal row and 3-pin GND header, for flying wires\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals (SEGGER schematic and board print)\u003c\/th\u003e\n\u003ctd\u003e10-pin row, J-Link pin in brackets: VTref (1), TRST (3), TDI (5), TMS\/SWDIO (7), TCK\/SWCLK (9), RTCK (11), TDO\/SWO (13), RESET (15), pin 17 (17), VSUPPLY (19). 3-pin header: GND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIntended use\u003c\/th\u003e\n\u003ctd\u003ePrototype hardware without a final connector; manual connection to ST Discovery boards\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. Its product page pictures a set of coloured jumper wires alongside the board, but neither that page nor SEGGER's shop states how many wires are supplied.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHand wiring suits the bench, not repeat connection in production; for a header-free board in volume, the \u003ca href=\"\/it\/products\/segger-8-06-04-10-pin-needle-adapter\"\u003e10-Pin Needle Adapter\u003c\/a\u003e fits a fixed footprint.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no wire count, wire length or electrical specification.\u003c\/li\u003e\n  \u003cli\u003eFor a 10-pin 0.05\" header with a non-standard pinout, the 50-Mil 10-Pin Patch Adapter keeps a connector on the target side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlying Wire Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connection\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlying Wire Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e10-pin row for flying wires\u003c\/td\u003e\n\u003ctd\u003ePrototypes, ST Discovery boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin, 0.05\" header\u003c\/td\u003e\n\u003ctd\u003eNon-standard 10-pin pinouts\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-13-measurement-patch-adapter\"\u003eMeasurement Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e20-pin 0.1\" header, with colour-coded jumper wires and test points\u003c\/td\u003e\n\u003ctd\u003eCustom connections with signal checks\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Flying Wire Adapter for \u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/segger-flying-wire-adapter\/\"\u003eSEGGER Flying Wire Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/flying-wire-adapter\"\u003eSEGGER shop: Flying Wire Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/segger-50-mil-10-pin-patch-adapter\/\"\u003eSEGGER 50-Mil 10-Pin Patch Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/measurement-patch-adapter\/\"\u003eSEGGER Measurement+Patch Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172604127,"sku":"8.06.27","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-27-40212744601823.jpg?v=1689515945"},{"product_id":"segger-8-06-08-j-link-mictor-38-adapter","title":"SEGGER J-Link Mictor 38 Adapter","description":"\u003cp\u003eThe SEGGER J-Link Mictor 38 Adapter (part number 8.06.08) adapts the standard J-Link 20-pin 0.1\" target connector to the 38-pin Mictor connector, following the single target connector pinout defined in the ARM \"ETM Architecture Specification\". It links the GND and JTAG pins to their counterparts on the 20-pin J-Link; the trace pins on the Mictor connector are not connected. It is for JTAG debug of targets that expose only a Mictor 38 header, using a J-Link rather than a trace probe.\u003c\/p\u003e\n\n\u003ch2\u003eJTAG Debug Through a Mictor 38 Header\u003c\/h2\u003e\n\u003cp\u003eThe Mictor side plugs into the target directly or through a trace cable, and the J-Link side connects through a 20-pin flat cable to the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eMictor 38 Pins Used by the Adapter\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMictor pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003enRES\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003eTDO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e12, 14\u003c\/td\u003e\n\u003ctd\u003eVTref\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003eRTCK\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003eTCK\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003ctd\u003eTMS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003ctd\u003eTDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003ctd\u003eTRST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact, Flasher ARM, Flasher Portable PLUS and Flasher Secure, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\", via 20-pin flat cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e38-pin Mictor, direct or via trace cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePinout standard\u003c\/th\u003e\n\u003ctd\u003eSingle target connector, ARM \"ETM Architecture Specification\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals connected\u003c\/th\u003e\n\u003ctd\u003eGND and JTAG (TDI, TMS, TCK, RTCK, TDO, TRST, nRES, VTref)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace pins\u003c\/th\u003e\n\u003ctd\u003eNot connected\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.08\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter; the order is for the J-Link Mictor 38 Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo trace. The 20-pin J-Link connector has no trace pins, so the Mictor trace pins are left unconnected; SEGGER points to J-Trace for trace.\u003c\/li\u003e\n  \u003cli\u003eFor J-Trace, SEGGER makes a separate J-Trace Mictor 38 Adapter that carries trace signals.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no electrical or mechanical specification for the adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link Mictor 38 Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eProbe and trace\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link Mictor 38 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e38-pin Mictor\u003c\/td\u003e\n\u003ctd\u003eJ-Link or Flasher; JTAG only, no trace\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-08-j-link-mictor-38-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-21-j-trace-mictor-38-adapter\"\u003eJ-Trace Mictor 38 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e38-pin Mictor\u003c\/td\u003e\n\u003ctd\u003eJ-Trace PRO; four trace data pins plus trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-21-j-trace-mictor-38-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-6-06-42-mipi-60-adapter-uk\"\u003eMIPI-60 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMIPI-60, Jacinto7 TI targets\u003c\/td\u003e\n\u003ctd\u003eJ-Link, J-Trace or Flasher; TPIU trace up to 4 pins\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-06-42-mipi-60-adapter-uk\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-00-19-pin-cortex-m-adapter\"\u003e19-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19-pin, 0.05\" Samtec FTSH\u003c\/td\u003e\n\u003ctd\u003eJ-Link or Flasher; JTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-00-19-pin-cortex-m-adapter\"\u003e£38\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the J-Link Mictor 38 Adapter for \u003cspan data-ds-price=\"segger-8-06-08-j-link-mictor-38-adapter\"\u003e£185\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/j-link-mictor-38-adapter\/\"\u003eSEGGER J-Link Mictor 38 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/j-link-mictor-38-adapter\"\u003eSEGGER shop: J-Link Mictor 38 Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/adapters\/j-trace-mictor-38-adapter\/\"\u003eSEGGER J-Trace Mictor 38 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/mipi-60-adapter\/\"\u003eSEGGER MIPI-60 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172636895,"sku":"8.06.08","price":185.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-08-40212943175903.jpg?v=1689523319"},{"product_id":"segger-8-06-23-microchip-2-wire-jtag-tdi-adapter","title":"SEGGER Microchip 2-Wire JTAG TDI Adapter","description":"\u003cp\u003eThe SEGGER Microchip 2-Wire JTAG TDI Adapter (part number 8.06.23) connects a J-Link debug probe to target hardware built on Microchip IS208x series MCUs. It adapts the standard J-Link 20-pin 0.1\" connector to the Microchip 6-pin single row 0.1\" connector and carries the 2-wire JTAG TDI interface.\u003c\/p\u003e\n\n\u003ch2\u003e2-Wire JTAG Connection for Microchip IS208x MCUs\u003c\/h2\u003e\n\u003cp\u003eJ-Link talks to the IS2083 over the Microchip 2-wire JTAG protocol: one bidirectional data line and a clock supplied by J-Link, plus RESET, VTref and GND. SEGGER's IS2083 getting started guide recommends this adapter for the J301 header on the BM8x evaluation board and maps the five signals to J-Link pins 15 (RESET), 1 (VTref), 4 (GND), 5 (TDI) and 9 (TCK). Pin assignments for the probe side are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Link Models and Software\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact). SEGGER states that the IS2083 is currently supported in J-Link Commander and in Keil uVision for PK51, which needs Keil C51\/PK51 tools V9.59 or later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.23\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eMicrochip 6-pin single row, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMicrochip 2-wire JTAG (TDI)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget pinout\u003c\/th\u003e\n\u003ctd\u003e1 #RESET, 2 VDD, 3 GND, 4 TDI, 5 TCK, 6 NC (populated, not connected)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget devices\u003c\/th\u003e\n\u003ctd\u003eMicrochip IS208x series MCUs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSchematic\u003c\/th\u003e\n\u003ctd\u003eAvailable from SEGGER on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 20-pin to 6-pin adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMade for Microchip IS208x series MCUs only. For PIC32 targets, see the Microchip LVP Adapter for PIC32.\u003c\/li\u003e\n  \u003cli\u003eSEGGER currently lists IS2083 support in J-Link Commander and Keil uVision for PK51 only.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's suitable products list names J-Link models only; no Flasher and no J-Link EDU models are listed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMicrochip 2-Wire JTAG TDI Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMicrochip 2-Wire JTAG TDI Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eMicrochip IS208x, 2-wire JTAG\u003c\/td\u003e\n\u003ctd\u003e6-pin single row 0.1\"\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-23-microchip-2-wire-jtag-tdi-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-microchip-lvp-adapter-pic32-debugging-80609\"\u003eMicrochip LVP Adapter for PIC32\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMicrochip PIC32\u003c\/td\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-microchip-lvp-adapter-pic32-debugging-80609\"\u003e£59\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-17-silabs-c2-adapter\"\u003eSiLabs C2 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSilicon Labs C2 debug interface\u003c\/td\u003e\n\u003ctd\u003e10-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-17-silabs-c2-adapter\"\u003e£75\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-10-renesas-rx-fine-adapter\"\u003eRX FINE Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RX, FINE interface\u003c\/td\u003e\n\u003ctd\u003e14-pin 0.1\" Renesas\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-10-renesas-rx-fine-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Microchip 2-Wire JTAG TDI Adapter for \u003cspan data-ds-price=\"segger-8-06-23-microchip-2-wire-jtag-tdi-adapter\"\u003e£66\u003c\/span\u003e ex VAT. Check that your device is an IS208x series part, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/microchip-2-wire-jtag-tdi-adapter\/\"\u003eSEGGER Microchip 2-Wire JTAG TDI Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/IS2083_Getting_Started\"\u003eSEGGER Knowledge Base: IS2083 Getting Started\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172669663,"sku":"8.06.23","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-23-40212945600735.jpg?v=1689523498"},{"product_id":"segger-8-06-13-measurement-patch-adapter","title":"SEGGER Measurement Patch Adapter","description":"\u003cp\u003eThe SEGGER Measurement+Patch Adapter (part number 8.06.13) plugs between a J-Link or Flasher and the target on standard 20-pin 0.1\" headers, with test points on the debug signals and a patch field for custom wiring. It connects targets that have no compatible standard debug connector, and gives scope access to the probe connection for signal integrity checks. Colour-coded jumper wires keep each signal easy to identify.\u003c\/p\u003e\n\n\u003ch2\u003eCustom Wiring for Targets Without a Standard Debug Connector\u003c\/h2\u003e\n\u003cp\u003eWhen no existing SEGGER adapter fits the target, the patch field lets you route each debug signal by hand. SEGGER's schematic shows VTREF, TRST, TDI, TMS, TCK, RTCK, TDO, RESET and VSUPPLY brought through the adapter. On the probe side it takes the standard J-Link 20-pin 0.1\" connector found on most J-Link models; pin assignments are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eTest Points for Signal Integrity Checks\u003c\/h2\u003e\n\u003cp\u003eTest points on the debug signals let you put a scope probe on the lines between programmer and target without disturbing the wiring. SEGGER's Knowledge Base article on signal integrity shows an SWD example with overshoot and ringing on SWCLK, measured with an active scope probe; it notes that inserting a Measurement+Patch adapter changed the signal enough for the connection to work.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.13\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eInline, standard 20-pin 0.1\" headers on both sides\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunctions\u003c\/th\u003e\n\u003ctd\u003eSignal test points, patch field for custom wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals on schematic\u003c\/th\u003e\n\u003ctd\u003eVTREF, TRST, TDI, TMS, TCK, RTCK, TDO, RESET, VSUPPLY\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003eColour-coded jumper wires\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable J-Link models\u003c\/th\u003e\n\u003ctd\u003ePro PoE, Pro, Ultra, WiFi, PLUS (Classic and Compact), BASE (Classic and Compact)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable Flasher models\u003c\/th\u003e\n\u003ctd\u003ePro, Pro XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Measurement+Patch Adapter\u003c\/li\u003e\n  \u003cli\u003eJumper wires for manual setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe adapter is made to give access to the signals, not to damp them. To reduce overshoot and ringing, SEGGER's Knowledge Base points to the Signal Smoothing Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no pinout table for the patch field on the product page; the schematic is the reference.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMeasurement+Patch Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMeasurement+Patch Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eInline 20-pin adapter with test points and a patch field\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-27-flying-wire-adapter\"\u003eFlying Wire Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eConverts the 20-pin connector to a 10-pin row for wiring to prototype boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eCustom wiring between the 20-pin connector and a 10-pin 0.05\" Cortex-M style connector\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-6-12-signal-smoothing-adapter\"\u003eSignal Smoothing Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable series resistors to damp JTAG overshoot and ringing\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-6-12-signal-smoothing-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Measurement+Patch Adapter for \u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/measurement-patch-adapter\/\"\u003eSEGGER Measurement+Patch Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Signal_Integrity\"\u003eSEGGER Knowledge Base: Signal Integrity\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172702431,"sku":"8.06.13","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-13-40212886585567.jpg?v=1689520259"},{"product_id":"segger-8-06-21-j-trace-mictor-38-adapter","title":"SEGGER J-Trace Mictor 38 Adapter","description":"\u003cp\u003eThe SEGGER J-Trace Mictor 38 Adapter (part number 8.06.21) connects a J-Trace PRO to a target with a 38-pin Mictor connector, carrying JTAG, GND, the trace clock and four trace data lines. Its pinout follows the single target connector pinout defined in the ARM \"ETM Architecture Specification\". It is for engineers who need ETM trace on boards that bring trace out on a Mictor header instead of the 0.05\" Cortex-M connector.\u003c\/p\u003e\n\n\u003ch2\u003eMictor 38 to J-Trace Trace Connector\u003c\/h2\u003e\n\u003cp\u003eThe adapter routes the GND, JTAG and some trace pins of the Mictor connector to their counterparts on the J-Trace's 0.05\" Cortex-M trace connector. TRACECLK and TRACEDATA0 to TRACEDATA3 are passed through, so a 4-bit trace port reaches the probe along with the debug signals. The Mictor side plugs directly into the target or connects through a trace cable; the J-Trace side connects to the probe with a half-pitch flat cable.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Trace PRO Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for the J-Trace PRO, J-Trace PRO Cortex-A\/R\/M and J-Trace PRO Cortex-M. The 19-pin JTAG\/SWD and Trace connector on these probes is described in SEGGER's Knowledge Base, and the 20-pin 0.1\" debug connector in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter; the J-Trace Mictor 38 Adapter itself is what is certain.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003ctd\u003e38-pin Mictor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe connector\u003c\/th\u003e\n\u003ctd\u003eJ-Trace 0.05\" Cortex-M trace connector, via half-pitch flat cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePinout standard\u003c\/th\u003e\n\u003ctd\u003eSingle target connector, ARM \"ETM Architecture Specification\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals carried\u003c\/th\u003e\n\u003ctd\u003eGND, JTAG, TRACECLK, TRACEDATA0 to TRACEDATA3\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget attachment\u003c\/th\u003e\n\u003ctd\u003eDirect to the target, or through a trace cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible probes\u003c\/th\u003e\n\u003ctd\u003eJ-Trace PRO, J-Trace PRO Cortex-A\/R\/M, J-Trace PRO Cortex-M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFour trace data lines (TRACEDATA0 to TRACEDATA3) are carried.\u003c\/li\u003e\n  \u003cli\u003eSEGGER does not list the J-Trace PRO RISC-V as a suitable probe.\u003c\/li\u003e\n  \u003cli\u003eFor a J-Link with no trace, use the J-Link Mictor 38 Adapter, which connects to the 20-pin 0.1\" J-Link connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace Mictor 38 Adapter Compared with the J-Link Version\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eFor\u003c\/th\u003e\n\u003cth\u003eTrace pins\u003c\/th\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace Mictor 38 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eJ-Trace PRO models\u003c\/td\u003e\n\u003ctd\u003eTRACECLK, TRACEDATA0 to 3 connected\u003c\/td\u003e\n\u003ctd\u003e0.05\" Cortex-M trace connector\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-21-j-trace-mictor-38-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-08-j-link-mictor-38-adapter\"\u003eJ-Link Mictor 38 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eJ-Link and Flasher\u003c\/td\u003e\n\u003ctd\u003eNot connected\u003c\/td\u003e\n\u003ctd\u003e20-pin J-Link connector, flat cable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-08-j-link-mictor-38-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the J-Trace Mictor 38 Adapter for \u003cspan data-ds-price=\"segger-8-06-21-j-trace-mictor-38-adapter\"\u003e£185\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See our \u003ca href=\"\/it\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e and the full \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/adapters\/j-trace-mictor-38-adapter\/\"\u003eSEGGER J-Trace Mictor 38 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/j-link-mictor-38-adapter\/\"\u003eSEGGER J-Link Mictor 38 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172735199,"sku":"8.06.21","price":185.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-21-40272809984223.jpg?v=1691332324"},{"product_id":"segger-8-06-30-programming-voltage-adapter","title":"SEGGER Programming Voltage Adapter","description":"\u003cp\u003eThe SEGGER Programming Voltage Adapter (part number 8.06.30) sits between a Flasher and its debug cable and delivers two independently controlled voltages, one for programming and one for target supply. Each channel covers 4V to 20V at up to 500mA, for targets that need a programming voltage above their supply voltage, including voltages beyond the standard 5V limit. The voltages come from an external power supply and are controlled by the Flasher.\u003c\/p\u003e\n\n\u003ch2\u003eProgramming Voltages Above 5V on Pin 17\u003c\/h2\u003e\n\u003cp\u003eAll debug signals pass through 1:1 except pin 17, which carries the programming voltage. Both connectors are the standard 20-pin 0.1\" socket and header, so the adapter plugs straight into the probe and takes the existing ribbon cable. Where the target runs from 5V, a jumper selects an optional 5V target supply from the Flasher. Pin assignments for the standard J-Link 20-pin 0.1\" connector are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible Flasher and J-Link Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact). SEGGER's description of how the voltages are controlled refers to the Flasher; ask us before planning a J-Link set-up around it.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.30\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003eProgramming voltage and target supply voltage, independently controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVoltage range (both channels)\u003c\/th\u003e\n\u003ctd\u003e4V to 20V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaximum current\u003c\/th\u003e\n\u003ctd\u003e500mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVoltage source\u003c\/th\u003e\n\u003ctd\u003eExternal power supply, controlled by the Flasher\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003e5V option\u003c\/th\u003e\n\u003ctd\u003e5V target supply from the Flasher, selected by jumper\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgramming voltage pin\u003c\/th\u003e\n\u003ctd\u003ePin 17\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignal mapping\u003c\/th\u003e\n\u003ctd\u003e1:1 except pin 17\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" socket and header\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the Programming Voltage Adapter itself is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe 4V to 20V channels need an external power supply.\u003c\/li\u003e\n  \u003cli\u003ePin 17 carries the programming voltage, so the J-Link Rx line for VCOM in SWD is not available through the adapter. In JTAG, pin 17 is DBGRQ, which J-Link does not connect. Check that nothing else on the target is wired to pin 17 before applying up to 20V.\u003c\/li\u003e\n  \u003cli\u003eMaximum current is 500mA.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProgramming Voltage Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it supplies\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProgramming Voltage Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eProgramming and target supply voltages, 4V to 20V, from an external supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-30-programming-voltage-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-29-5v-target-supply-adapter\"\u003e5V Target Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed 5V supply to the target\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-29-5v-target-supply-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-18-target-supply-adapter\"\u003eTarget Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable supply voltage to the target\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-14-supply-adapter\"\u003eSupply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed VTref level in place of the target's VTref, settable from 1.2V to 5.0V by changing one resistor\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Programming Voltage Adapter for \u003cspan data-ds-price=\"segger-8-06-30-programming-voltage-adapter\"\u003e£130\u003c\/span\u003e ex VAT. Check your device's programming voltage against the 4V to 20V range, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/programming-voltage-adapter\/\"\u003eSEGGER Programming Voltage Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/segger-programming-voltage-adapter\/\"\u003eSEGGER Programming Voltage Adapter (Flasher accessories)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172800735,"sku":"8.06.30","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-30-40212779860191.jpg?v=1689516123"},{"product_id":"segger-8-06-32-right-angle-female-to-female-adapter","title":"SEGGER Right Angle Female to Female (RAFF) Adapter","description":"\u003cp\u003eThe SEGGER RAFF Adapter (part number 8.06.32) is a right angle female to female adapter that plugs a J-Link or Flasher directly onto a straight (vertical) pin header on the target board, in place of the standard IDC ribbon cable. It is a 1:1 adapter, so the pinout does not change. With a J-Link PLUS Compact, J-Link BASE Compact or Flasher Compact it makes a compact debug or programming set-up.\u003c\/p\u003e\n\n\u003ch2\u003eRight Angle Connection Without a Ribbon Cable\u003c\/h2\u003e\n\u003cp\u003eThe right angle lets the probe plug onto the target header directly, with no ribbon cable between them. Because the mapping is 1:1, any target header already wired to the standard J-Link 20-pin 0.1\" connector found on most J-Link models works unchanged. Pin assignments are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible Probes, Programmers and Isolators\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for the SWD Isolator and USB Isolator.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.32\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRight angle, female to female\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignal mapping\u003c\/th\u003e\n\u003ctd\u003e1:1, pinout unchanged\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003ePlugs onto a straight (vertical) PCB pin header\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReplaces\u003c\/th\u003e\n\u003ctd\u003eStandard IDC ribbon cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals on schematic\u003c\/th\u003e\n\u003ctd\u003eVTREF, TRST, TDI, TMS, TCK, RTCK, TDO, RESET, PIN17, VSUPPLY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the RAFF Adapter itself is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo pin remapping. A target with a different debug connector needs the matching SEGGER adapter.\u003c\/li\u003e\n  \u003cli\u003eMade for straight (vertical) target headers.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRAFF Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRAFF Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eRight angle 1:1 connection onto a vertical header, replaces the ribbon cable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-32-right-angle-female-to-female-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-11-2mm-adapter\"\u003e2mm Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eConverts the 20-pin connector to a 20-pin 2mm pitch connector, 1:1\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-11-2mm-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-27-flying-wire-adapter\"\u003eFlying Wire Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eConverts the 20-pin connector to a 10-pin row for wiring to prototype boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the RAFF Adapter for \u003cspan data-ds-price=\"segger-8-06-32-right-angle-female-to-female-adapter\"\u003e£64\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/segger-raff-adapter\/\"\u003eSEGGER RAFF Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172833503,"sku":"8.06.32","price":64.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-32-40212785332447.jpg?v=1689516300"},{"product_id":"segger-8-06-01-renesas-rx-adapter","title":"SEGGER Renesas RX Adapter","description":"\u003cp\u003eThe SEGGER RX Adapter (part number 8.06.01) maps the standard J-Link 20-pin 0.1\" connector to the standard 14-pin 0.1\" Renesas connector, for J-Link or Flasher connections to Renesas RX600, RX200 and RX100 series MCUs over JTAG or FINE. A jumper can power the target at 3.3V or 5V.\u003c\/p\u003e\n\n\u003ch2\u003eJTAG and FINE Connections to Renesas RX MCUs\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists JTAG for RX610, RX621, RX62G, RX62N, RX62T, RX630, RX631, RX63N, RX63T, RX64M, RX65N, RX660, RX66T, RX71M and RX72N, and FINE for RX111, RX13T, RX140, RX210, RX21A and RX220. In FINE mode the FINED line is open drain. On revisions covered by SEGGER's product page it needs a pull-up on the target (1k Ohm recommended); SEGGER's Knowledge Base says Rev9 has a 3.3k pull-up on the adapter, so no target pull-up is needed. Probe-side pin assignments are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eOptional 3.3V or 5V Target Supply\u003c\/h2\u003e\n\u003cp\u003eThe adapter can power the target hardware, with 3.3V or 5V selected by a jumper. With the supply option jumpered, the target is powered through VTref (pin 8 of the 14-pin connector). It ships set to \"do not power target\", with the jumper open.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact, Flasher Portable PLUS and Flasher Secure.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.01\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eRenesas standard 14-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, FINE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget series\u003c\/th\u003e\n\u003ctd\u003eRenesas RX600, RX200, RX100\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eJTAG pinout (14-pin)\u003c\/th\u003e\n\u003ctd\u003e1 TCK, 3 nTRST, 4 EMLE, 5 TDO, 7 MD0, 9 TMS, 10 UB, 11 TDI, 13 nRES\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFINE pinout (14-pin)\u003c\/th\u003e\n\u003ctd\u003e1 FINEC, 4 not connected (Rev9: GND), 7 FINED, 10 UB, 13 nRES\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFINED pull-up\u003c\/th\u003e\n\u003ctd\u003eOlder revisions: 1k Ohm on target recommended; Rev9: 3.3k on adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e3.3V or 5V via jumper, through VTref (pin 8); default off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x RX Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER's product page says the RX FINE Adapter is required for FINE on RX63x or RX72N; its Knowledge Base says RX Adapter Rev9 replaces the RX FINE Adapter. Ask us which revision ships.\u003c\/li\u003e\n  \u003cli\u003eSEGGER notes that adapter revisions older than 5 may lack FINE support; the revision, or on older units a production date, is printed on the back.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRX Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRX Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eRenesas RX600, RX200, RX100\u003c\/td\u003e\n\u003ctd\u003eJTAG, FINE; optional 3.3V or 5V target supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-01-renesas-rx-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-10-renesas-rx-fine-adapter\"\u003eRX FINE Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RX\u003c\/td\u003e\n\u003ctd\u003eFINE, with 3k3 pull-up on FINED\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-10-renesas-rx-fine-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-rl78-programming-adapter-8-06-20\"\u003eRL78 14-Pin Programming Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78\u003c\/td\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-renesas-m16c-family-10-pin-adapter-8-06-40\"\u003eRenesas M16C Family 10-Pin Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas M16C\u003c\/td\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-renesas-m16c-family-10-pin-adapter-8-06-40\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the RX Adapter for \u003cspan data-ds-price=\"segger-8-06-01-renesas-rx-adapter\"\u003e£130\u003c\/span\u003e ex VAT. Check your RX part against SEGGER's JTAG and FINE lists above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/rx-adapter\/\"\u003eSEGGER RX Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/RX_Adapter_Rev9\"\u003eSEGGER Knowledge Base: RX Adapter Rev9\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172866271,"sku":"8.06.01","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-01-40212783759583.jpg?v=1689516482"},{"product_id":"segger-8-06-10-renesas-rx-fine-adapter","title":"SEGGER RX FINE Adapter","description":"\u003cp\u003eThe SEGGER RX FINE Adapter (part number 8.06.10) maps the standard J-Link 20-pin 0.1\" connector to the standard 14-pin 0.1\" connector defined by Renesas, for FINE connections from a J-Link or Flasher to Renesas RX devices. It provides a 3k3 pull-up on the FINED line to meet the FINE interface specification.\u003c\/p\u003e\n\n\u003ch2\u003eFINE Debug and Programming for Renesas RX\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists FINE support through this adapter for the RX111, RX13T, RX140, RX210, RX21A, RX220, RX630, RX631, RX63N, RX64M, RX65N, RX651, RX66T, RX660, RX671 and RX72N. SEGGER's RX Adapter page specifies this adapter for FINE on RX63x and RX72N devices. SEGGER's Knowledge Base says RX Adapter Rev9 now covers FINE and replaces this adapter. Probe-side pin assignments are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eRenesas 14-Pin Connector Pinout\u003c\/h2\u003e\n\u003cp\u003eOn the 14-pin side, pin 1 is FINEC, pin 4 EMLE, pin 7 FINED, pin 10 UB and pin 13 nRES; SEGGER's RX130 row also shows VTref on pin 8 and GND on pins 2, 12 and 14. The signal on each pin varies by family: on the RX630, RX631, RX63N, RX63T and RX72N, for example, pin 1 is TCK\/FINEC\/P27 and pin 4 connects to EMLE, while the RX111 and RX130 have no EMLE connection.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eRenesas standard 14-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eFINE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget pinout (14-pin)\u003c\/th\u003e\n\u003ctd\u003e1 FINEC, 4 EMLE, 7 FINED, 10 UB, 13 nRES (VTref on 8 and GND on 2, 12, 14 per SEGGER's RX130 row)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFINED pull-up\u003c\/th\u003e\n\u003ctd\u003e3k3 on the adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eListed devices\u003c\/th\u003e\n\u003ctd\u003eRX111, RX13T, RX140, RX210, RX21A, RX220, RX630, RX631, RX63N, RX64M, RX65N, RX651, RX66T, RX660, RX671, RX72N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x RX FINE Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFINE only. For JTAG to Renesas RX, use the RX Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER lists no target power option for this adapter; the RX Adapter offers 3.3V or 5V by jumper.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRX FINE Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRX FINE Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eRenesas RX\u003c\/td\u003e\n\u003ctd\u003eFINE, with 3k3 pull-up on FINED\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-10-renesas-rx-fine-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-01-renesas-rx-adapter\"\u003eRX Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RX600, RX200, RX100\u003c\/td\u003e\n\u003ctd\u003eJTAG, FINE; optional 3.3V or 5V target supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-01-renesas-rx-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-rl78-programming-adapter-8-06-20\"\u003eRL78 14-Pin Programming Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78\u003c\/td\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-renesas-m16c-family-10-pin-adapter-8-06-40\"\u003eRenesas M16C Family 10-Pin Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas M16C\u003c\/td\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-renesas-m16c-family-10-pin-adapter-8-06-40\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the RX FINE Adapter for \u003cspan data-ds-price=\"segger-8-06-10-renesas-rx-fine-adapter\"\u003e£64\u003c\/span\u003e ex VAT. Check your RX part against SEGGER's FINE list above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/rx-fine-adapter\/\"\u003eSEGGER RX FINE Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/rx-adapter\/\"\u003eSEGGER RX Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/RX_Adapter_Rev9\"\u003eSEGGER Knowledge Base: RX Adapter Rev9\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172899039,"sku":"8.06.10","price":64.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-10-40213022736607.jpg?v=1689526377"},{"product_id":"segger-8-06-35-sifive-arty-trace-adapter","title":"SEGGER SiFive-ARTY Trace Adapter","description":"\u003cp\u003eThe SEGGER SiFive-ARTY Trace Adapter (part number 8.06.35) makes debug and trace connections between a J-Trace PRO and an ARTY board running SiFive RISC-V core bitstreams. It uses the board's JD header for debug and the JC header for trace, carrying TRACECLK and four trace data lines, TRACEDATA[0] to TRACEDATA[3]. SEGGER lists it as suitable for the J-Trace PRO and J-Trace PRO RISC-V.\u003c\/p\u003e\n\n\u003ch2\u003eDebug and Trace on the ARTY Board's JD and JC Headers\u003c\/h2\u003e\n\u003cp\u003eThe ARTY board provides several identical headers. When it runs SiFive RISC-V bitstreams with trace enabled, JD is used as the debug connector and JC as the trace connector, and the adapter connects to both. On JD it carries VTref\/VDD, GND, TCK, RESET, TRST, TMS, TDO and TDI; on JC it carries GND, TRACECLK and TRACEDATA[0] to TRACEDATA[3].\u003c\/p\u003e\n\n\u003ch2\u003eTrace with J-Trace PRO, or Debug Only with J-Link\u003c\/h2\u003e\n\u003cp\u003eThis adapter is for trace, so it pairs with a J-Trace PRO. For debug only, with a J-Link, SEGGER offers the separate SiFive-ARTY Adapter, which uses the JD header alone.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.35\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget board\u003c\/th\u003e\n\u003ctd\u003eARTY board running SiFive RISC-V core bitstreams with trace enabled\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug header\u003c\/th\u003e\n\u003ctd\u003eJD: 2 VTref\/VDD, 3 GND, 4 GND, 7 TCK, 8 RESET, 9 TRST, 10 TMS, 11 TDO, 12 TDI; 1, 5, 6 NC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace header\u003c\/th\u003e\n\u003ctd\u003eJC: 3 GND, 4 GND, 5 TRACECLK, 6 TRACEDATA[0], 8 TRACEDATA[1], 10 TRACEDATA[2], 12 TRACEDATA[3]; 1, 2, 7, 9, 11 NC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable probes\u003c\/th\u003e\n\u003ctd\u003eJ-Trace PRO, J-Trace PRO RISC-V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the SiFive-ARTY Trace Adapter itself is supplied. The ARTY board and the J-Trace PRO are not included.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNeeds a J-Trace PRO or J-Trace PRO RISC-V; SEGGER lists no J-Link models for this adapter.\u003c\/li\u003e\n  \u003cli\u003eTrace needs a SiFive RISC-V bitstream on the ARTY board with trace enabled.\u003c\/li\u003e\n  \u003cli\u003eSEGGER does not state the connector type on the J-Trace side on the product page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSiFive-ARTY Trace Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003cth\u003eDebug or trace\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSiFive-ARTY Trace Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eARTY board, SiFive RISC-V bitstreams, JD and JC headers\u003c\/td\u003e\n\u003ctd\u003eDebug and trace, with J-Trace PRO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-35-sifive-arty-trace-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-24-sifive-arty-adapter\"\u003eSiFive-ARTY Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARTY board, SiFive RISC-V bitstreams, JD header\u003c\/td\u003e\n\u003ctd\u003eDebug, with J-Link\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-24-sifive-arty-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-19-xilinx-adapter\"\u003eXilinx Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin 2mm Xilinx JTAG connector, Zynq-based cores\u003c\/td\u003e\n\u003ctd\u003eDebug\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-15-intel-fpga-adapter\"\u003eIntel FPGA Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin Intel FPGA JTAG connector, FPGA-based cores\u003c\/td\u003e\n\u003ctd\u003eDebug\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-15-intel-fpga-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the SiFive-ARTY Trace Adapter for \u003cspan data-ds-price=\"segger-8-06-35-sifive-arty-trace-adapter\"\u003e£130\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/adapters\/sifive-arty-trace-adapter\/\"\u003eSEGGER SiFive-ARTY Trace Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/j-link-sifive-arty-adapter\/\"\u003eSEGGER SiFive-ARTY Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172931807,"sku":"8.06.35","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-35-40280515084511.jpg?v=1691069337"},{"product_id":"segger-8-06-24-sifive-arty-adapter","title":"SEGGER SiFive-ARTY Adapter","description":"\u003cp\u003eThe SEGGER SiFive-ARTY Adapter (part number 8.06.24) makes debug connections between a J-Link and an ARTY board running SiFive RISC-V core bitstreams. It connects to the board's JD header, which is used as the debug connector for SiFive RISC-V bitstreams, and carries JTAG (TDI, TMS, TCK, TDO), nTRST, nRESET, VTref and GND.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link Debug for SiFive RISC-V on the ARTY Board\u003c\/h2\u003e\n\u003cp\u003eThe ARTY board provides several identical headers; when it runs SiFive RISC-V bitstreams, JD is the debug connector. The adapter plugs onto JD and brings the JTAG signals to the J-Link, so you can load and debug code on the SiFive core with the same probe used for other targets. Probe-side pin assignments are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Link Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact). For trace as well as debug, SEGGER offers the SiFive-ARTY Trace Adapter for the J-Trace PRO, which adds the JC header.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.24\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget board\u003c\/th\u003e\n\u003ctd\u003eARTY board running SiFive RISC-V core bitstreams\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget header\u003c\/th\u003e\n\u003ctd\u003eJD (debug connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget pinout\u003c\/th\u003e\n\u003ctd\u003e1 TDO, 2 nTRST, 3 TCK, 7 TDI, 8 TMS, 9 nRESET, 11 GND, 12 VTref; 4, 5, 6, 10 NC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable J-Link models\u003c\/th\u003e\n\u003ctd\u003ePro PoE, Pro, Ultra, WiFi, PLUS (Classic and Compact), BASE (Classic and Compact)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the SiFive-ARTY Adapter itself is supplied. The ARTY board is not included.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDebug only; no trace. For trace, use the SiFive-ARTY Trace Adapter with a J-Trace PRO.\u003c\/li\u003e\n  \u003cli\u003eFor the ARTY board with SiFive RISC-V bitstreams; other FPGA boards need their own adapter, such as the Xilinx or Intel FPGA Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's suitable products list names J-Link models only; no Flasher and no J-Link EDU models are listed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSiFive-ARTY Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003cth\u003eDebug or trace\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSiFive-ARTY Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eARTY board, SiFive RISC-V bitstreams, JD header\u003c\/td\u003e\n\u003ctd\u003eDebug, with J-Link\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-24-sifive-arty-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-35-sifive-arty-trace-adapter\"\u003eSiFive-ARTY Trace Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARTY board, SiFive RISC-V bitstreams, JD and JC headers\u003c\/td\u003e\n\u003ctd\u003eDebug and trace, with J-Trace PRO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-35-sifive-arty-trace-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-19-xilinx-adapter\"\u003eXilinx Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin 2mm Xilinx JTAG connector, Zynq-based cores\u003c\/td\u003e\n\u003ctd\u003eDebug\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-15-intel-fpga-adapter\"\u003eIntel FPGA Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin Intel FPGA JTAG connector, FPGA-based cores\u003c\/td\u003e\n\u003ctd\u003eDebug\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-15-intel-fpga-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the SiFive-ARTY Adapter for \u003cspan data-ds-price=\"segger-8-06-24-sifive-arty-adapter\"\u003e£63\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/j-link-sifive-arty-adapter\/\"\u003eSEGGER SiFive-ARTY Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/adapters\/sifive-arty-trace-adapter\/\"\u003eSEGGER SiFive-ARTY Trace Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172964575,"sku":"8.06.24","price":63.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-24-40212781039839.jpg?v=1689516126"},{"product_id":"segger-8-6-12-signal-smoothing-adapter","title":"SEGGER Signal Smoothing Adapter","description":"\u003cp\u003eThe SEGGER Signal Smoothing Adapter (part number 8.06.12) is inserted between a J-Link debug probe or Flasher in-circuit programmer and the debug target to overcome signal integrity issues. User-adjustable series resistors, 47R by default, damp critical signal rise and fall times to counter overshoot and ringing on the debug lines.\u003c\/p\u003e\n\n\u003ch2\u003eSeries Resistors to Damp Overshoot and Ringing\u003c\/h2\u003e\n\u003cp\u003eSEGGER notes that JTAG signals can be affected by overshoot and ringing. The adapter places series resistors in the critical lines to damp the edges, and the values can be changed to suit the target. SEGGER's own example uses a target with minimum capacitive load on the JTAG signals (below 3 pF), connected through a 60 cm standard flat ribbon cable.\u003c\/p\u003e\n\n\u003ch2\u003eProven on SWD in SEGGER's Signal Integrity Guide\u003c\/h2\u003e\n\u003cp\u003eSEGGER's Knowledge Base article on signal integrity lists the Signal Smoothing Adapter as a mitigation for overshoot. In its SWD example, inserting the adapter makes the voltage curves smoother, the overshoot and ringing are flattened and communication succeeds. The same article measures the SWCLK line with an active scope probe, and notes that inserting a Measurement+Patch adapter also changed the signal enough for the connection to work.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.12\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eInline, between probe or programmer and target\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSeries resistors\u003c\/th\u003e\n\u003ctd\u003eUser adjustable, default 47R\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePurpose\u003c\/th\u003e\n\u003ctd\u003eDamping critical signal rise and fall times (overshoot and ringing)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable J-Link models\u003c\/th\u003e\n\u003ctd\u003ePro PoE, Pro, Ultra, WiFi, PLUS (Classic and Compact), BASE (Classic and Compact)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable Flasher models\u003c\/th\u003e\n\u003ctd\u003ePro, Pro XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the Signal Smoothing Adapter itself is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER publishes the 47R default and one example set-up, but no guide to choosing other resistor values.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's signal integrity article also recommends considering target hardware fixes, such as series resistors or layout improvements.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSignal Smoothing Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it changes on the probe connection\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSignal Smoothing Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eAdds adjustable series resistors to damp overshoot and ringing\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-6-12-signal-smoothing-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-13-measurement-patch-adapter\"\u003eMeasurement+Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdds test points on the debug signals and a patch field for custom wiring\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-14-supply-adapter\"\u003eSupply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProvides a fixed VTref level, 1.2V to 5.0V, in place of the target's VTref\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Signal Smoothing Adapter for \u003cspan data-ds-price=\"segger-8-6-12-signal-smoothing-adapter\"\u003e£60\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/signal-smoothing-adapter\/\"\u003eSEGGER Signal Smoothing Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Signal_Integrity\"\u003eSEGGER Knowledge Base: Signal Integrity\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172997343,"sku":"8.06.12","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-12-40213032239327.jpg?v=1689526570"},{"product_id":"segger-8-06-17-silabs-c2-adapter","title":"SEGGER SiLabs C2 Adapter","description":"\u003cp\u003eThe SEGGER SiLabs C2 Adapter (part number 8.06.17) makes debug connections between a J-Link or Flasher and target hardware with the Silicon Labs C2 debug interface. It adapts the standard J-Link 20-pin 0.1\" connector to a 10-pin 0.1\" connector pinout that is compatible with Silicon Labs evaluation boards.\u003c\/p\u003e\n\n\u003ch2\u003eSilicon Labs C2 Debug from a Standard J-Link\u003c\/h2\u003e\n\u003cp\u003eSilicon Labs C2 is one of the target interfaces of current J-Link BASE hardware, and SEGGER's supported cores list for J-Link includes Silicon Labs EFM8. This adapter does the physical conversion, so a J-Link or Flasher with the 20-pin connector can plug into the 10-pin C2 header on a Silicon Labs evaluation board or on your own design using the same pinout. Probe-side pin assignments are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS. SEGGER's schematic for the adapter includes a table of resistor values by VTref voltage.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.17\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e10-pin, 0.1\" (2.54mm), Silicon Labs evaluation board pinout\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eSilicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable J-Link models\u003c\/th\u003e\n\u003ctd\u003ePro PoE, Pro, Ultra, WiFi, PLUS (Classic and Compact), BASE (Classic and Compact)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable Flasher models\u003c\/th\u003e\n\u003ctd\u003ePro, Pro XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x SiLabs C2 Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFor the Silicon Labs C2 interface and the 10-pin evaluation board pinout only.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes the target pinout and the resistor table as images only, not as text.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSiLabs C2 Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSiLabs C2 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eSilicon Labs C2\u003c\/td\u003e\n\u003ctd\u003e10-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-17-silabs-c2-adapter\"\u003e£75\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-23-microchip-2-wire-jtag-tdi-adapter\"\u003eMicrochip 2-Wire JTAG TDI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMicrochip 2-wire JTAG, IS208x MCUs\u003c\/td\u003e\n\u003ctd\u003e6-pin single row 0.1\"\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-23-microchip-2-wire-jtag-tdi-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-10-renesas-rx-fine-adapter\"\u003eRX FINE Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas FINE\u003c\/td\u003e\n\u003ctd\u003e14-pin 0.1\" Renesas\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-10-renesas-rx-fine-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the SiLabs C2 Adapter for \u003cspan data-ds-price=\"segger-8-06-17-silabs-c2-adapter\"\u003e£75\u003c\/span\u003e ex VAT. Check your Silicon Labs part against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/silabs-c2-adapter\/\"\u003eSEGGER SiLabs C2 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003eSEGGER J-Link BASE product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173030111,"sku":"8.06.17","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-17-40213034500319.jpg?v=1689526558"},{"product_id":"segger-8-06-14-supply-adapter","title":"SEGGER Supply Adapter","description":"\u003cp\u003eThe SEGGER Supply Adapter (part number 8.06.14) provides a fixed I\/O voltage level for VTref, adjustable from 1.2V to 5.0V and set to 3.3V by default, so the target board does not need to supply VTref on pin 1. It sits between a J-Link or Flasher and the target on a standard 20-pin 0.1\" socket and header, with all other signals passed through 1:1.\u003c\/p\u003e\n\n\u003ch2\u003eFixed VTref Without a Target Connection\u003c\/h2\u003e\n\u003cp\u003eJ-Link uses VTref (pin 1) to detect whether the target has power, to set the logic-level reference for its inputs and to drive its outputs to the target; it is normally fed from Vdd of the target board. Where the target cannot provide it, the Supply Adapter generates the level on board instead, which reduces the wiring needed on the target. Pin assignments for the standard J-Link 20-pin 0.1\" connector are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eVoltage Set by a Single Resistor\u003c\/h2\u003e\n\u003cp\u003eThe I\/O voltage is selected by one SMD 0603 resistor, so changing it from the 3.3V default needs soldering. SEGGER's schematic shows a voltage regulator (MCP1826T) generating the level.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS. The J-Link \/ J-Trace User Guide points to it in its section on VTref.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.14\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eFixed VTref (I\/O voltage) level in place of the target's VTref\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eI\/O voltage range\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5.0V, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDefault I\/O voltage\u003c\/th\u003e\n\u003ctd\u003e3.3V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVoltage setting\u003c\/th\u003e\n\u003ctd\u003eSingle SMD 0603 resistor (soldering required)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" socket and header\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignal mapping\u003c\/th\u003e\n\u003ctd\u003e1:1 except VTref (pin 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the Supply Adapter itself is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eChanging the I\/O voltage needs a resistor change and soldering.\u003c\/li\u003e\n  \u003cli\u003eSEGGER describes it as a source for the VTref I\/O level, not as a target power supply. For target power, see the Target Supply Adapter or 5V Target Supply Adapter.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSupply Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it supplies\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupply Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eFixed VTref level, 1.2V to 5.0V, in place of the target's VTref\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-18-target-supply-adapter\"\u003eTarget Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable supply voltage to the target\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-29-5v-target-supply-adapter\"\u003e5V Target Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed 5V supply to the target\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-29-5v-target-supply-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-30-programming-voltage-adapter\"\u003eProgramming Voltage Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProgramming and target supply voltages, 4V to 20V, from an external supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-30-programming-voltage-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Supply Adapter for \u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/supply-adapter\/\"\u003eSEGGER Supply Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08001_J-Link_\/_J-Trace_User_Guide\"\u003eSEGGER Knowledge Base: UM08001 J-Link \/ J-Trace User Guide\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173062879,"sku":"8.06.14","price":81.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-14-40213038563551.jpg?v=1689526741"},{"product_id":"segger-8-06-18-target-supply-adapter","title":"SEGGER Target Supply Adapter - Adjustable Power Supply for J-Link Debug Probes","description":"\u003cp\u003eThe SEGGER Target Supply Adapter (part number 8.06.18) powers a target board with an adjustable voltage from 0.8V to 3.6V, set to 3.3V by default, at up to 400mA at 3.3V and 3.6V. It fits between a J-Link or Flasher and the debug cable, with a 20-pin 0.1\" socket on the probe side and a 20-pin 0.1\" header on the target side, and passes all debug signals through 1:1. It suits bring-up and programming of low-voltage boards that have no supply of their own on the bench.\u003c\/p\u003e\n\n\u003ch2\u003eAdjustable 0.8V to 3.6V Target Supply from the Debug Connector\u003c\/h2\u003e\n\u003cp\u003eThe output voltage is set by a single SMD 0805 resistor, so changing it from the 3.3V default means soldering in a different value. Available current falls with the output voltage: 400mA at 3.6V and 3.3V, 300mA at 2.5V, 200mA at 1.8V and 150mA at 1.0V. SEGGER states that exceeding these values will damage the adapter, so check your board's current draw at its supply voltage before connecting it.\u003c\/p\u003e\n\u003cp\u003eBoth sides use the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eWorks with J-Link and Flasher\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the J-Link PRO PoE, J-Link PRO, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact, plus the Flasher PRO, Flasher PRO XL, Flasher Compact and Flasher Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the Target Supply Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" socket\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" header\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignal routing\u003c\/th\u003e\n\u003ctd\u003e1:1 for all debug signals\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply voltage\u003c\/th\u003e\n\u003ctd\u003e0.8V to 3.6V, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDefault supply voltage\u003c\/th\u003e\n\u003ctd\u003e3.3V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaximum output current\u003c\/th\u003e\n\u003ctd\u003e400mA at 3.6V and 3.3V; 300mA at 2.5V; 200mA at 1.8V; 150mA at 1.0V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVoltage adjustment\u003c\/th\u003e\n\u003ctd\u003eSingle resistor, SMD 0805, soldering required\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003ePRO PoE, PRO, Ultra, WiFi, PLUS Classic and Compact, BASE Classic and Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThere is no switch or jumper; a voltage other than 3.3V needs a resistor change by soldering.\u003c\/li\u003e\n  \u003cli\u003eCurrent capability drops at lower voltages, to 150mA at 1.0V. Exceeding the rated values damages the adapter.\u003c\/li\u003e\n  \u003cli\u003eThe range ends at 3.6V. For a fixed 5V target supply, use the 5V Target Supply Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTarget Supply Adapter Compared with Related SEGGER Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTarget Supply Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eAdjustable target supply, debug signals 1:1\u003c\/td\u003e\n\u003ctd\u003e0.8V to 3.6V, 3.3V default, up to 400mA\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-29-5v-target-supply-adapter\"\u003e5V Target Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed target supply, debug signals 1:1\u003c\/td\u003e\n\u003ctd\u003e5V ±5%\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-29-5v-target-supply-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-14-supply-adapter\"\u003eSupply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed VTref I\/O voltage, so the target need not supply pin 1\u003c\/td\u003e\n\u003ctd\u003e1.2V to 5.0V, set by resistor change\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-36-test-farm-power-adapter\"\u003eTest Farm Power Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote on\/off of target power over USB\u003c\/td\u003e\n\u003ctd\u003e5V, around 250mA from J-Link; 1A and more with an external supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-36-test-farm-power-adapter\"\u003e£110\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Target Supply Adapter for \u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e ex VAT. Check your board's current at its supply voltage against the ratings above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/target-supply-adapter\/\"\u003eSEGGER Target Supply Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08001_J-Link_\/_J-Trace_User_Guide\"\u003eSEGGER Knowledge Base: UM08001 J-Link \/ J-Trace User Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173095647,"sku":"8.06.18","price":84.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-18-40213037482207.jpg?v=1689526737"},{"product_id":"segger-8-06-36-test-farm-power-adapter","title":"SEGGER Test Farm Power Adapter","description":"\u003cp\u003eThe SEGGER Test Farm Power Adapter (part number 8.06.36) lets target power supplied through a USB connector be switched on and off remotely with J-Link software, while the debug signals stay connected. It sits between the J-Link and the debug cable on 20-pin 0.1\" connectors and powers the target from a USB-A port: 5V at around 250mA from the J-Link, or 1A and more from an external USB supply on its Micro USB input. SEGGER pairs it with Ethernet-capable probes such as the J-Link PRO for building test farms.\u003c\/p\u003e\n\n\u003ch2\u003eRemote Power Cycling for Board Farms and CI\u003c\/h2\u003e\n\u003cp\u003eIn a test farm, evaluation boards, prototypes, production boards or finished products are connected to the network through debug probes, so testers and developers can reach them remotely. The adapter adds power control to each node: a target can be switched off to save energy, or power-cycled for an automated reboot. SEGGER names regression testing, continuous integration and compiler tests, and compatibility testing of wireless protocols such as Wi-Fi, Zigbee and Matter across several identical or mixed targets. SEGGER's Knowledge Base Test Farm example uses J-Link PRO PoE probes on the LAN.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Power Sources, One USB-A Output\u003c\/h2\u003e\n\u003cp\u003eAll debug signals pass through 1:1 except pin 19, which carries the target supply. Target power leaves the adapter on a power-only USB 2.0 Type-A host connector. Powered from the J-Link, the output is boosted to 5V and limited to around 250mA. With an external source such as a USB hub or wall adapter on the Micro USB connector, 1A and more is possible. The probe side uses the standard J-Link 20-pin 0.1\" connector found on most J-Link models; see our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the Test Farm Power Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" socket\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" header\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignal routing\u003c\/th\u003e\n\u003ctd\u003e1:1 for all debug signals except pin 19 (target supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget power output\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Type-A host connector, power only\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutput when powered by J-Link\u003c\/th\u003e\n\u003ctd\u003e5V (boosted), limited to around 250mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutput with external supply\u003c\/th\u003e\n\u003ctd\u003e1A and more\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExternal supply input\u003c\/th\u003e\n\u003ctd\u003eMicro USB, from a USB hub or wall adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower control\u003c\/th\u003e\n\u003ctd\u003eRemote on\/off using J-Link software\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePowered from the J-Link alone, the output is limited to around 250mA; targets that need more require an external USB supply on the Micro USB input.\u003c\/li\u003e\n  \u003cli\u003eThe switched supply reaches the target through the USB-A connector, so the target must take its power from USB.\u003c\/li\u003e\n  \u003cli\u003eThe debug signals stay connected while power is off. To disconnect the programmer's signals from the target fully, SEGGER offers the Relay Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTest Farm Power Adapter Compared with Related SEGGER Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003cth\u003eTarget power\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTest Farm Power Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eRemote on\/off of target power over USB\u003c\/td\u003e\n\u003ctd\u003e5V, around 250mA from J-Link; 1A and more with an external supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-36-test-farm-power-adapter\"\u003e£110\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-41-relay-adapter-uk\"\u003eRelay Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRelay contacts fully disconnect Flasher signals from the target, for automated test setups\u003c\/td\u003e\n\u003ctd\u003eNot a supply adapter\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-41-relay-adapter-uk\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-18-target-supply-adapter\"\u003eTarget Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable target supply, debug signals 1:1\u003c\/td\u003e\n\u003ctd\u003e0.8V to 3.6V, up to 400mA\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-29-5v-target-supply-adapter\"\u003e5V Target Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed target supply, debug signals 1:1\u003c\/td\u003e\n\u003ctd\u003e5V ±5%\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-29-5v-target-supply-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Test Farm Power Adapter for \u003cspan data-ds-price=\"segger-8-06-36-test-farm-power-adapter\"\u003e£110\u003c\/span\u003e ex VAT. Pair it with a networked probe such as the \u003ca href=\"\/it\/products\/segger-j-link-pro-debugger-programmer-8-12-00\"\u003eJ-Link PRO\u003c\/a\u003e, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/test-farm-power-adapter\/\"\u003eSEGGER Test Farm Power Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Test_Farm\"\u003eSEGGER Knowledge Base: Test Farm\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173128415,"sku":"8.06.36","price":110.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-36-40212789166303.jpg?v=1689516315"},{"product_id":"segger-8-06-19-xilinx-adapter","title":"SEGGER Xilinx Adapter","description":"\u003cp\u003eThe SEGGER Xilinx Adapter (part number 8.06.19) connects a J-Link or Flasher to the 14-pin 2mm Xilinx JTAG connector, giving debug access to FPGA-based MCU cores such as the ARM Cortex-A9 core in Zynq devices. It plugs onto the standard J-Link 20-pin 0.1\" connector found on most J-Link models and carries the VTREF, TDI, TMS, TCK, TDO and HALT signals to the Xilinx header.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link Debug Access to Zynq Cortex-A9 Through the Xilinx JTAG Header\u003c\/h2\u003e\n\u003cp\u003eWhere a Zynq board brings JTAG out on the 14-pin 2mm Xilinx connector rather than an ARM-defined header, the adapter lets a J-Link debug the Cortex-A9 core from that connector directly, with no hand-wired harness. SEGGER's pinout drawing for the Xilinx side labels VTREF, TDI, TMS, TCK, TDO and HALT. Pin assignments for the probe side are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the J-Link PRO PoE, J-Link PRO, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact for debugging, and the Flasher PRO, Flasher PRO XL, Flasher Compact and Flasher Portable PLUS for programming.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the Xilinx Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003eXilinx JTAG, 14-pin, 2mm pitch\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side signals\u003c\/th\u003e\n\u003ctd\u003eVTREF, TDI, TMS, TCK, TDO, HALT\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTargets\u003c\/th\u003e\n\u003ctd\u003eFPGA-based MCU cores, such as the ARM Cortex-A9 in Zynq devices\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003ePRO PoE, PRO, Ultra, WiFi, PLUS Classic and Compact, BASE Classic and Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJTAG only; SEGGER's pinout carries no SWD or trace signals.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no electrical specification beyond the connector type and pitch.\u003c\/li\u003e\n  \u003cli\u003eIt fits the 14-pin 2mm Xilinx header only. For the 10-pin Intel FPGA JTAG connector, use the Intel FPGA Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eXilinx Adapter Compared with Related SEGGER Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eInterface and targets\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eXilinx Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e14-pin 2mm Xilinx JTAG\u003c\/td\u003e\n\u003ctd\u003eJTAG; FPGA-based cores such as Zynq Cortex-A9\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-15-intel-fpga-adapter\"\u003eIntel FPGA Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin 100-mil Intel FPGA JTAG\u003c\/td\u003e\n\u003ctd\u003eJTAG; FPGA-based MCU cores such as Cyclone V\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-15-intel-fpga-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-03-14-pin-ti-adapter\"\u003e14-Pin TI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin TI JTAG\u003c\/td\u003e\n\u003ctd\u003eJTAG; TI MCU targets\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-03-14-pin-ti-adapter\"\u003e£62\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-00-19-pin-cortex-m-adapter\"\u003e19-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19-pin 0.05\" Samtec FTSH\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD and SWO; Cortex-M targets\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-00-19-pin-cortex-m-adapter\"\u003e£38\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Xilinx Adapter for \u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e ex VAT. Check that your board carries the 14-pin 2mm Xilinx JTAG header, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/xilinx-adapter\/\"\u003eSEGGER Xilinx Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08001_J-Link_\/_J-Trace_User_Guide\"\u003eSEGGER Knowledge Base: UM08001 J-Link \/ J-Trace User Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173161183,"sku":"8.06.19","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-19-40213036237023.jpg?v=1689526562"},{"product_id":"segger-8-07-00-jtag-isolator-adapter","title":"SEGGER J-Link JTAG Isolator","description":"\u003cp\u003eThe SEGGER J-Link JTAG Isolator (part number 8.07.00) is an isolator box that sits between a J-Link or Flasher and the target, giving 1kV DC basic isolation on JTAG at up to 4 MHz for target interface voltages from 1.2V to 5V. Both sides use 20-pin 0.1\" male JTAG connectors; the isolator is powered from the probe side and draws less than 25µA on the target side. Use it where the debug or production tools do not share a ground with the application.\u003c\/p\u003e\n\n\u003ch2\u003eJTAG Isolation for Motor Control, Sensor and Analogue Designs\u003c\/h2\u003e\n\u003cp\u003eSEGGER describes isolation as essential when the development or production tools are not connected to the same ground as the application. Motor control applications tend to introduce electrical spikes, and the isolator keeps them away from the probe. In sensor and analogue designs, it keeps the debug system from disturbing the measurement. The isolator uses high-speed digital isolators and passes TRST, TDI, TMS, TCK, RTCK, TDO and RESET.\u003c\/p\u003e\n\u003cp\u003eProtection includes overvoltage and overcurrent protection on the probe side, overvoltage protection on the target VTref pin and ESD protection. Four LEDs show probe or programmer power, probe or programmer overload, target power and target RESET. On the target side, SEGGER's Knowledge Base lists pins 1 and 2 as VCC, through which the target side draws its power, with pins 17 and 19 not connected. See our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide for the probe side.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJTAG Isolator Box\u003c\/li\u003e\n  \u003cli\u003e0.1\" 20-pin ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e1kV DC, basic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eTRST, TDI, TMS, TCK, RTCK, TDO, RESET\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" male JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" male JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003ePowered from the probe side\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side power consumption\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e73mm x 46mm x 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003ePRO PoE, PRO, Ultra, WiFi, PLUS, BASE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo SWD and no cJTAG: the isolator does not support bidirectional transmission on SWDIO or TMSC. Use the SWD Isolator for SWD.\u003c\/li\u003e\n  \u003cli\u003eTarget interface speed is limited to 4 MHz.\u003c\/li\u003e\n  \u003cli\u003eBasic isolation only. Do not use it with hazardous voltages without a further protection measure such as double or reinforced isolation.\u003c\/li\u003e\n  \u003cli\u003eThird-party probes with the same pinout must supply 5V on pin 19; SEGGER states their use is at your own risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJTAG Isolator Compared with Other SEGGER Isolators\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolator\u003c\/th\u003e\n\u003cth\u003eIsolated link\u003c\/th\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003cth\u003eMax. speed\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJTAG Isolator (this product)\u003c\/td\u003e\n\u003ctd\u003eProbe to target, JTAG, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-01-swd-isolator-adapter\"\u003eSWD Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProbe to target, SWD and SWO, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-02-usb-isolator-adapter\"\u003eUSB Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHost PC to probe, USB\u003c\/td\u003e\n\u003ctd\u003e3kV DC for 1s, basic\u003c\/td\u003e\n\u003ctd\u003eUSB Full-Speed, 12 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-02-usb-isolator-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-10-j-trace-isolator-adapter\"\u003eJ-Trace Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eJ-Trace to target, JTAG, SWD, SWO and ETM trace, 19-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz debug, 75 MHz trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the JTAG Isolator for \u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e ex VAT. Confirm that your target debugs over JTAG at 4 MHz or below, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-jtag-isolator\/\"\u003eSEGGER JTAG Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_-_Hardware\"\u003eSEGGER Knowledge Base: Flasher Hardware (JTAG Isolator pinout)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-swd-isolator\/\"\u003eSEGGER SWD Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-usb-isolator\/\"\u003eSEGGER USB Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/isolators\/j-trace-isolator\/\"\u003eSEGGER J-Trace Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173193951,"sku":"8.07.00","price":226.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-07-00-jtag-isolator-adapter-segger-8-07-00-debug-store-uk-42705861738719.png?v=1718110185"},{"product_id":"segger-8-07-01-swd-isolator-adapter","title":"SEGGER SWD Isolator Adapter","description":"\u003cp\u003eThe SEGGER SWD Isolator (part number 8.07.01) is an isolator box that sits between a J-Link or Flasher and the target, giving 1kV DC basic isolation on SWD, including SWO, at up to 4 MHz for target interface voltages from 1.2V to 5V. Both sides use 20-pin 0.1\" male SWD connectors; the isolator is powered from the probe side and draws less than 25µA on the target side. Use it where the debug or production tools do not share a ground with the application.\u003c\/p\u003e\n\n\u003ch2\u003eSWD Isolation for Motor Control, Sensor and Analogue Designs\u003c\/h2\u003e\n\u003cp\u003eSEGGER describes isolation as essential when the development or production tools are not connected to the same ground as the application. Motor control applications tend to introduce electrical spikes, and the isolator keeps them away from the probe; in sensor and analogue designs it keeps the debug system from disturbing the measurement. The isolator uses high-speed digital isolators for low propagation delay and passes SWCLK, SWDIO, SWO and RESET.\u003c\/p\u003e\n\u003cp\u003eThe probe side powers the isolator through pin 19, and the target side draws its power through VTref on pin 1; pin 19 is not connected on the target side. Pins 4, 6, 8, 10, 12, 14, 16, 18 and 20 are GND. Protection covers overvoltage and overcurrent on the probe side, overvoltage on the target VTref pin, and ESD. Four LEDs show probe or programmer power, probe or programmer overload, target power and target RESET. See our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide for the probe side.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSWD Isolator Box\u003c\/li\u003e\n  \u003cli\u003e0.1\" 20-pin ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e1kV DC, basic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eSWD with SWO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eSWCLK, SWDIO, SWO, RESET\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" male SWD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" male SWD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eFrom the probe side via pin 19; target side via VTref (pin 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side power consumption\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e73mm x 46mm x 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003ePRO PoE, PRO, Ultra, WiFi, PLUS, BASE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo JTAG, because there is no TDI connection. Use the JTAG Isolator for JTAG targets.\u003c\/li\u003e\n  \u003cli\u003ecJTAG works only if the probe uses the J-Link configuration, with TMSC on pin 7.\u003c\/li\u003e\n  \u003cli\u003eTarget interface speed is limited to 4 MHz.\u003c\/li\u003e\n  \u003cli\u003eBasic isolation only. Do not use it with hazardous voltages without a further protection measure such as double or reinforced isolation.\u003c\/li\u003e\n  \u003cli\u003eThird-party probes with the same pinout must supply 5V on pin 19; SEGGER states their use is at your own risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSWD Isolator Compared with Other SEGGER Isolators\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolator\u003c\/th\u003e\n\u003cth\u003eIsolated link\u003c\/th\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003cth\u003eMax. speed\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSWD Isolator (this product)\u003c\/td\u003e\n\u003ctd\u003eProbe to target, SWD and SWO, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-00-jtag-isolator-adapter\"\u003eJTAG Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProbe to target, JTAG, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-02-usb-isolator-adapter\"\u003eUSB Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHost PC to probe, USB\u003c\/td\u003e\n\u003ctd\u003e3kV DC for 1s, basic\u003c\/td\u003e\n\u003ctd\u003eUSB Full-Speed, 12 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-02-usb-isolator-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-10-j-trace-isolator-adapter\"\u003eJ-Trace Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eJ-Trace to target, JTAG, SWD, SWO and ETM trace, 19-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz debug, 75 MHz trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the SWD Isolator for \u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e ex VAT. Confirm that your target debugs over SWD at 4 MHz or below, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-swd-isolator\/\"\u003eSEGGER SWD Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-jtag-isolator\/\"\u003eSEGGER JTAG Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-usb-isolator\/\"\u003eSEGGER USB Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/isolators\/j-trace-isolator\/\"\u003eSEGGER J-Trace Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173226719,"sku":"8.07.01","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-07-01-segger-swd-isolator-adapter-8-07-01-42714419298527.png?v=1722900541"},{"product_id":"segger-8-07-02-usb-isolator-adapter","title":"SEGGER USB Isolator Adapter","description":"\u003cp\u003eThe SEGGER USB Isolator (part number 8.07.02) sits in the USB link between the host PC and a J-Link or Flasher, giving 3kV DC basic isolation (for 1s) between the probe and the host. It runs the connection at USB Full-Speed (12 Mbit\/s) with a maximum propagation delay of 70ns, and supplies the probe with up to 200mA. It suits setups where the PC and the target application are not on the same ground, and it protects the probe from electrical spikes and from the overvoltage that low-budget USB hubs can cause.\u003c\/p\u003e\n\n\u003ch2\u003eHost-Side Isolation Without Slowing the Debug Link\u003c\/h2\u003e\n\u003cp\u003eIsolating on the host side forces the PC to talk to the probe at USB Full-Speed. SEGGER states that this does not, or not significantly, reduce debug and flash programming speed. The 70ns propagation delay is treated as one additional USB hub. Host-side isolation works with every debug interface the probe supports, including JTAG, SWD (with or without SWO), FINE, C2 and UART, and it isolates both the probe and the target from the PC. Where USB Hi-Speed (480 Mbit\/s) is needed, isolate on the target side instead with the JTAG or SWD Isolator, which typically limits the target-side debug speed.\u003c\/p\u003e\n\n\u003ch2\u003eConnectors, Indicators and Protection\u003c\/h2\u003e\n\u003cp\u003eA USB Micro-B connector faces the PC and a USB Type-A connector faces the J-Link or Flasher. A green PWR LED shows the isolator is powered and can supply the probe side; a red\/orange OVL LED shows overload when the probe draws too much current. The isolator has short-circuit protection.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no package list for the USB Isolator. You receive the isolator itself. SEGGER does not say whether a USB Micro-B cable for the host side is supplied, so ask us before ordering if you need one.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e3kV DC for 1s, basic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUSB speed\u003c\/th\u003e\n\u003ctd\u003eUSB Full-Speed, 12 Mbit\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePropagation delay\u003c\/th\u003e\n\u003ctd\u003e70ns max. (counts as one additional hub)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. output current to probe\u003c\/th\u003e\n\u003ctd\u003e200mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost-side connector\u003c\/th\u003e\n\u003ctd\u003eUSB Micro-B\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003eUSB Type-A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIndicators\u003c\/th\u003e\n\u003ctd\u003ePWR (green), OVL overload (red\/orange)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eShort-circuit protection\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003ePRO, Ultra, WiFi, PLUS Classic and Compact, BASE Classic and Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe host link runs at USB Full-Speed only. For Hi-Speed USB, isolate on the target side with the JTAG or SWD Isolator.\u003c\/li\u003e\n  \u003cli\u003eThe connected probe may draw no more than 200mA.\u003c\/li\u003e\n  \u003cli\u003eOn a J-Link PRO V4 or J-Link ULTRA+ V4, apply firmware updates with the isolator removed. SEGGER reports that these two models can lose communication during a firmware update made through the USB Isolator; refit it once the update has finished.\u003c\/li\u003e\n  \u003cli\u003eBasic isolation only. Do not use it with hazardous voltages without a further protection measure such as double or reinforced isolation.\u003c\/li\u003e\n  \u003cli\u003eSEGGER does not support other vendors' USB isolators with J-Link; their use is at your own risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUSB Isolator Compared with Other SEGGER Isolators\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolator\u003c\/th\u003e\n\u003cth\u003eIsolated link\u003c\/th\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003cth\u003eMax. speed\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eUSB Isolator (this product)\u003c\/td\u003e\n\u003ctd\u003eHost PC to probe, USB\u003c\/td\u003e\n\u003ctd\u003e3kV DC for 1s, basic\u003c\/td\u003e\n\u003ctd\u003eUSB Full-Speed, 12 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-02-usb-isolator-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-00-jtag-isolator-adapter\"\u003eJTAG Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProbe to target, JTAG, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-01-swd-isolator-adapter\"\u003eSWD Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProbe to target, SWD and SWO, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-10-j-trace-isolator-adapter\"\u003eJ-Trace Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eJ-Trace to target, JTAG, SWD, SWO and ETM trace, 19-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz debug, 75 MHz trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the USB Isolator for \u003cspan data-ds-price=\"segger-8-07-02-usb-isolator-adapter\"\u003e£185\u003c\/span\u003e ex VAT. Check that your probe is among the compatible models in the specifications above, such as the \u003ca href=\"\/it\/products\/segger-8-08-00-j-link-base-classic\"\u003eJ-Link BASE Classic\u003c\/a\u003e, \u003ca href=\"\/it\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e or \u003ca href=\"\/it\/products\/segger-5-17-01-flasher-pro-programmer\"\u003eFlasher PRO\u003c\/a\u003e, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-usb-isolator\/\"\u003eSEGGER USB Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-jtag-isolator\/\"\u003eSEGGER JTAG Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-swd-isolator\/\"\u003eSEGGER SWD Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/isolators\/j-trace-isolator\/\"\u003eSEGGER J-Trace Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_no_USB_enumeration\"\u003eSEGGER Knowledge Base: J-Link no USB enumeration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173259487,"sku":"8.07.02","price":185.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-07-02-segger-usb-isolator-adapter-8-07-02-42710005416159.png?v=1722901620"},{"product_id":"segger-8-07-10-j-trace-isolator-adapter","title":"SEGGER J-Trace Isolator Adapter","description":"\u003cp\u003eThe SEGGER J-Trace Isolator (part number 8.07.10) provides 1 kV DC basic electrical isolation between a J-Trace PRO and a target with the standard 0.05\" 19-pin Cortex-M connector, while passing JTAG, SWD and ETM trace. It works with 1.2V to 5V targets, at JTAG and SWD speeds up to 4 MHz and trace clocks up to 75 MHz. It is for trace and debug work where the probe and the target must be kept electrically separate.\u003c\/p\u003e\n\n\u003ch2\u003eIsolated ETM Trace on the 19-Pin Cortex-M Connector\u003c\/h2\u003e\n\u003cp\u003eBoth sides of the isolator use a 0.05\" 19-pin Cortex-M male connector: EMULATOR connects to the J-Trace cable and TARGET to the target cable. ETM trace pins are fully supported, with TRACECLK and TRACEDATA0 to TRACEDATA3 carried through high-speed digital isolators. SEGGER rates the trace clock at up to 75 MHz, the limit of the isolator IC, and reports up to 120 MHz in one example setup at room temperature with adjusted sampling delays in the J-Trace PRO.\u003c\/p\u003e\n\n\u003ch2\u003ePowered from the J-Trace PRO\u003c\/h2\u003e\n\u003cp\u003eThe probe powers the isolator logic through pins 11 and 13, so the J-Trace PRO must supply 5V there; SEGGER notes that you may need to run \"power on perm\" once in J-Link Commander. The target side draws only a few microamps (under 25 µA). Three LEDs show emulator power, target power and target RESET.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Trace Isolator\u003c\/li\u003e\n  \u003cli\u003e20-pin target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e1 kV DC, basic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003eEMULATOR and TARGET, each 0.05\" 19-pin Cortex-M male\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eJTAG frequency\u003c\/th\u003e\n\u003ctd\u003eUp to 4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWD frequency\u003c\/th\u003e\n\u003ctd\u003eUp to 4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace clock\u003c\/th\u003e\n\u003ctd\u003eUp to 75 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace signals\u003c\/th\u003e\n\u003ctd\u003eTRACECLK, TRACEDATA0 to TRACEDATA3\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eFrom the probe, 5V on pins 11 and 13; under 25 µA from target\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIndicators\u003c\/th\u003e\n\u003ctd\u003eEmulator power (green), target power (green), target RESET (red)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDesigned for\u003c\/th\u003e\n\u003ctd\u003eJ-Trace V2 or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic isolation only. SEGGER requires double or reinforced isolation to protect people from hazardous voltages, so do not rely on the isolator alone in that case.\u003c\/li\u003e\n  \u003cli\u003eJTAG and SWD are limited to 4 MHz, and trace clocks above 75 MHz are beyond the isolator IC's specification.\u003c\/li\u003e\n  \u003cli\u003eVTref (pin 1) must have no series resistor, and pin 9 should be left open on the target.\u003c\/li\u003e\n  \u003cli\u003eOther ARM emulators with the same pinout need 5V on pin 19 of the emulator connector; SEGGER states this is at your own risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace Isolator Compared with the J-Link Isolators\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolator\u003c\/th\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace Isolator (this product)\u003c\/td\u003e\n\u003ctd\u003e0.05\" 19-pin Cortex-M\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, up to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eETM, up to 75 MHz trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-00-jtag-isolator-adapter\"\u003eJ-Link JTAG Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e20-pin 0.1\" JTAG\u003c\/td\u003e\n\u003ctd\u003eJTAG, up to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-07-01-swd-isolator-adapter\"\u003eSWD Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e20-pin 0.1\" SWD\u003c\/td\u003e\n\u003ctd\u003eSWD and SWO, up to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the J-Trace Isolator for \u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e ex VAT, or ask us for a formal quotation. SEGGER lists it as suitable for the \u003ca href=\"\/it\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e, J-Trace PRO Cortex-A\/R\/M, J-Trace PRO Cortex-M and J-Trace PRO RISC-V. See the full \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/isolators\/j-trace-isolator\/\"\u003eSEGGER J-Trace Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-swd-isolator\/\"\u003eSEGGER SWD Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/isolators\/jtag-isolator\/\"\u003eSEGGER JTAG Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173292255,"sku":"8.07.10","price":320.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-07-10-40213030895839.jpg?v=1689526567"},{"product_id":"segger-5-17-01-flasher-pro-programmer","title":"SEGGER Flasher PRO In-System Flash Programmer 5.17.01","description":"\u003cp\u003eThe SEGGER Flasher PRO (part number 5.17.01) is a universal in-system flash programmer with 128 MB of internal flash, a 1.2V to 5V target interface and target interface speeds up to 50 MHz. It programs internal MCU and SoC flash plus external QSPI, SPI and CFI NOR flash, either stand-alone or under PC control over USB, RS232 or Ethernet. It suits production lines, ATE stations and teams that need one programmer for many device families.\u003c\/p\u003e\n\n\u003ch2\u003eStand-Alone In-System Flash Programmer for Production Lines\u003c\/h2\u003e\n\u003cp\u003eOnce a project and firmware image are stored in the 128 MB internal flash, the Flasher PRO programs without a PC. Programming starts from a button press, a TTL signal, or remotely over USB, UART, RS232 or Ethernet, and the result is reported through LEDs, the software or the hardware interfaces. SEGGER isolates the Ethernet data lines in accordance with IEEE 802.3, tested at 1500 Vrms for one minute. For MCUs that allow memory access while running, turbo mode downloads and programs at the same time to cut overhead.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Interfaces and Supported Devices\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists tens of thousands of supported devices in hundreds of device families, and new flash loaders arrive with the free software updates. The Knowledge Base lists JTAG, cJTAG, SWD, SWD multi-drop, SPI, QSPI, Microchip PIC32 ICSP, Renesas FINE and Silicon Labs C2 among the supported target interfaces. Supported cores include ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, ARM7 and ARM9, RISC-V RV32 and RV64 and Renesas RX. The target connector is a male 20-pin IDC keyed box header with 0.1\" (2.54mm) pitch; pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon).\u003c\/p\u003e\n\n\u003ch2\u003eSerial Numbers, Patch Data and Authorized Flashing\u003c\/h2\u003e\n\u003cp\u003eSerial numbers, MAC addresses, signatures and licence keys can be applied to each unit as patch data during programming. Authorized Flashing sets a limit on the number of programming cycles, so a programmer sent to a contract manufacturer stops at the agreed number of cycles. Licences for all supported devices are included in the price, and software, firmware and flash loader updates are free.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interfaces\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 High-Speed (USB-C), RS232, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMale 20-pin IDC keyed box header, 0.1\" (2.54mm) pitch, optional adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInternal flash memory\u003c\/th\u003e\n\u003ctd\u003e128 MB (TBW: 10 TB)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003e50 MHz (JTAG, SWD)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTRef\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e1.5V to 5V adjustable, max. 400mA (hardware V8; fixed 5V on earlier hardware)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 143.2mA idle (hardware V8)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget cable length\u003c\/th\u003e\n\u003ctd\u003e20cm recommended and supplied; max. 2m, which may reduce target interface speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSize (without cables)\u003c\/th\u003e\n\u003ctd\u003e130mm x 70mm x 28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eLess than 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher PRO\u003c\/li\u003e\n  \u003cli\u003eUSB cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal flash is 128 MB; the Flasher PRO XL has 2 GB for Linux kernels, OS images and eMMC or SD card preparation.\u003c\/li\u003e\n  \u003cli\u003eStand-alone mode on ARM Cortex targets is limited to CoreSight SoC-400 DAP setups. Microchip PIC32, Silicon Labs EFM8 and Renesas RH850 G4KH are supported in PC-based mode only.\u003c\/li\u003e\n  \u003cli\u003eThe Flasher is a production programmer, not a debug probe: SEGGER lists no ETB or ETM trace, no Cortex-M monitor mode debugging and no CMSIS-DAP mode.\u003c\/li\u003e\n  \u003cli\u003eSome target interfaces need a SEGGER adapter, for example AVR PDI, STM8 SWIM and Renesas RX FINE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher PRO Compared with Other SEGGER Flasher Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003cth\u003eHost and control interfaces\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher PRO (this product)\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-17-02-flasher-pro-xl-programmer\"\u003eFlasher PRO XL\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-19-00-flasher-compact-programmer\"\u003eFlasher Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-16-02-flasher-portable-plus-programmer\"\u003eFlasher Portable PLUS\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, 1.8\" colour display\u003c\/td\u003e\n\u003ctd\u003eLi-ion battery or USB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-16-02-flasher-portable-plus-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eEnd-of-line programming of STM32 or NXP Cortex-M33 boards, triggered by a TTL signal from the test fixture. Programming external QSPI NOR flash alongside the MCU on the same board. Supplying a contract manufacturer with a programmer limited by Authorized Flashing to the agreed build quantity.\u003c\/p\u003e\n\u003cp\u003eChoose the Flasher PRO when a programming station needs Ethernet or RS232 control. For a fixture where space is tight and USB control is enough, the Flasher Compact is functionally identical and supports the same devices.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Flasher PRO for \u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug and programming tools\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 20\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-pro\/\"\u003eSEGGER Flasher PRO product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Pro\"\u003eSEGGER Knowledge Base: Flasher Pro\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Pro_V8\"\u003eSEGGER Knowledge Base: Flasher Pro V8\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-compact\/\"\u003eSEGGER Flasher Compact product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173325023,"sku":"5.17.01","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-flasher-pro-5-17-01-perspective-front.png?v=1794818091"},{"product_id":"segger-5-17-02-flasher-pro-xl-programmer","title":"SEGGER Flasher PRO XL Programmer","description":"\u003cp\u003eThe SEGGER Flasher PRO XL (part number 5.17.02) is a universal in-system flash programmer with 2 GB of internal memory, sixteen times the 128 MB of the Flasher PRO, so it can program devices with up to 2 GB of memory even in stand-alone mode. It keeps the Flasher PRO's 1.2V to 5V target interface, target interface speeds up to 50 MHz and USB, RS232 and Ethernet control. It suits production lines programming Linux kernels, OS images, eMMC memories and SD cards, or holding several firmware variants on one programmer.\u003c\/p\u003e\n\n\u003ch2\u003e2 GB Flash Programmer for Large Images and eMMC\u003c\/h2\u003e\n\u003cp\u003eThe extra memory is aimed at images that do not fit in 128 MB: Linux kernels, OS images and the graphics and media data behind high-resolution GUIs. SEGGER also lists the XL for preparing eMMC memories and SD cards. The 2 GB can hold several firmware images and microcontroller configurations at once, which suits mass customisation where one station builds several product variants. SEGGER states that the larger memory does not slow programming: turbo mode downloads and programs at the same time on MCUs that allow memory access while running.\u003c\/p\u003e\n\n\u003ch2\u003eStand-Alone or PC-Controlled Programming\u003c\/h2\u003e\n\u003cp\u003eProgramming can be started by a button press, a TTL signal, or remotely over USB, UART, RS232 or Ethernet. SEGGER isolates the Ethernet data lines in accordance with IEEE 802.3, tested at 1500 Vrms for one minute. Licences for all supported devices are included in the price, and software, firmware and flash loader updates are free.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Interfaces and Supported Devices\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists tens of thousands of supported devices in hundreds of device families, and new flash loaders arrive with the free software updates. The Knowledge Base lists JTAG, cJTAG, SWD, SWD multi-drop, SPI, QSPI, Microchip PIC32 ICSP, Renesas FINE and Silicon Labs C2 among the supported target interfaces, with Authorized Flashing to limit the number of programming cycles. The target connector is a male 20-pin IDC keyed box header with 0.1\" (2.54mm) pitch; pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon).\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interfaces\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 High-Speed (USB-C), RS232, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMale 20-pin IDC keyed box header, 0.1\" (2.54mm) pitch, optional adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003e50 MHz (JTAG, SWD)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTRef\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e1.5V to 5V adjustable, max. 400mA (hardware V8; fixed 5V on earlier hardware)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 140mA idle (hardware V8)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget cable length\u003c\/th\u003e\n\u003ctd\u003e20cm recommended and supplied; max. 2m, which may reduce target interface speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSize (without cables)\u003c\/th\u003e\n\u003ctd\u003e130mm x 70mm x 28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e126g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eLess than 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher PRO XL\u003c\/li\u003e\n  \u003cli\u003eUSB-C cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIf your images fit in 128 MB, the Flasher PRO offers the same interfaces and target specification.\u003c\/li\u003e\n  \u003cli\u003eStand-alone mode on ARM Cortex targets is limited to CoreSight SoC-400 DAP setups. Microchip PIC32, Silicon Labs EFM8 and Renesas RH850 G4KH are supported in PC-based mode only.\u003c\/li\u003e\n  \u003cli\u003eThe Flasher is a production programmer, not a debug probe: SEGGER lists no ETB or ETM trace, no Cortex-M monitor mode debugging and no CMSIS-DAP mode.\u003c\/li\u003e\n  \u003cli\u003eMounting brackets are not included; SEGGER sells them separately and publishes files for 3D printing your own.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher PRO XL Compared with Other SEGGER Flasher Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003cth\u003eHost and control interfaces\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher PRO XL (this product)\u003c\/td\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-17-01-flasher-pro-programmer\"\u003eFlasher PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-19-00-flasher-compact-programmer\"\u003eFlasher Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-16-02-flasher-portable-plus-programmer\"\u003eFlasher Portable PLUS\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, 1.8\" colour display\u003c\/td\u003e\n\u003ctd\u003eLi-ion battery or USB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-16-02-flasher-portable-plus-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eProgramming a Linux kernel and OS image for an ARM Cortex-A SoC board on the production line. Preparing eMMC memory for a media-rich display unit whose graphics assets run to hundreds of megabytes. Holding several regional firmware variants on one station so the operator can switch builds without reloading the programmer.\u003c\/p\u003e\n\u003cp\u003eChoose the XL when images or the number of stored variants outgrow 128 MB; otherwise the Flasher PRO is the same programmer with less memory.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Flasher PRO XL for \u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug and programming tools\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 20\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-pro-xl\/\"\u003eSEGGER Flasher PRO XL product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Pro_XL\"\u003eSEGGER Knowledge Base: Flasher Pro XL\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Pro\"\u003eSEGGER Knowledge Base: Flasher Pro\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Pro_XL_V8\"\u003eSEGGER Knowledge Base: Flasher Pro XL V8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173357791,"sku":"5.17.02","price":1320.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-5-17-02-40212722122975.jpg?v=1689515762"},{"product_id":"segger-5-19-00-flasher-compact-programmer","title":"SEGGER Flasher Compact In-Circuit Programmer","description":"\u003cp\u003eThe SEGGER Flasher Compact (part number 5.19.00) is a universal in-system flash programmer in a 40g housing with four mounting holes, a USB-C host port, 128 MB of internal flash, a 1.2V to 5V target interface and JTAG\/SWD speeds up to 50 MHz. SEGGER describes it as functionally identical to the Flasher PRO, supporting the same devices, without the PRO's Ethernet and RS232 ports. It is built to be fixed inside production rigs, ATE and HIL fixtures, and is the programming channel used with the Flasher Hub-4 and Flasher Hub-12 for gang programming.\u003c\/p\u003e\n\n\u003ch2\u003eCompact Flash Programmer Built for ATE and Test Fixtures\u003c\/h2\u003e\n\u003cp\u003eThe four mounting holes let the Compact be screwed to a mounting plate or directly inside a fixture. It is powered from its USB-C port and needs no external supply; in stand-alone mode any standard USB power source works, such as a USB wall charger or a port on a Flasher Hub, with no data connection to a PC. It has three boot modes: PC-based, stand-alone and file-access.\u003c\/p\u003e\n\n\u003ch2\u003eGang Programming with Flasher Hub-4 and Flasher Hub-12\u003c\/h2\u003e\n\u003cp\u003eConnected to a Flasher Hub-4 or Flasher Hub-12, each Flasher Compact becomes one programming channel, and up to 24 devices can be programmed in parallel. Each channel can carry its own firmware image and settings, so different variants can run on the same line.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Interfaces and Supported Devices\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists tens of thousands of supported devices in hundreds of device families, and new flash loaders arrive with the free software updates. Supported target interfaces are SPI, QSPI, 8051 C2, cJTAG, FINE, ICSP, IIC, ISP, JTAG, PDI, SPD, SWD, SWIM, UART and UPDI. Supported cores include ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, ARM7 and ARM9, RISC-V RV32 and RV64 and Renesas RX. Licences for all supported devices are included in the price, and devices not yet supported can be added with the Flasher SDK. The target connector is a male 20-pin IDC keyed box header with 0.1\" (2.54mm) pitch; pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon).\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMale 20-pin IDC keyed box header, 0.1\" (2.54mm) pitch, optional adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target interfaces\u003c\/th\u003e\n\u003ctd\u003eSPI, QSPI, 8051 C2, cJTAG, FINE, ICSP, IIC, ISP, JTAG, PDI, SPD, SWD, SWIM, UART, UPDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInternal flash memory\u003c\/th\u003e\n\u003ctd\u003e128 MB (TBW: 10 TB)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003eDepends on target interface; JTAG\/SWD 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTRef\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 130mA idle; 500mA if the target is powered by the Flasher\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget cable length\u003c\/th\u003e\n\u003ctd\u003e20cm recommended and supplied; max. 2m, which may reduce target interface speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e40g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eFour mounting holes in the housing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eLess than 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher Compact\u003c\/li\u003e\n  \u003cli\u003eUSB-C cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo Ethernet or RS232. For direct network or serial control of a single programmer, choose the Flasher PRO.\u003c\/li\u003e\n  \u003cli\u003eStand-alone mode on ARM Cortex targets is limited to CoreSight SoC-400 DAP setups. Microchip PIC32, Silicon Labs EFM8 and Renesas RH850 G4KH are supported in PC-based mode only, and the Renesas FINE interface currently works in host-based mode only.\u003c\/li\u003e\n  \u003cli\u003eThe Flasher is a production programmer, not a debug probe: SEGGER lists no ETB or ETM trace, no Cortex-M monitor mode debugging and no CMSIS-DAP mode.\u003c\/li\u003e\n  \u003cli\u003eGang programming needs a Flasher Hub-4 or Flasher Hub-12, sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher Compact Compared with Other SEGGER Flasher Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003cth\u003eHost and control interfaces\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher Compact (this product)\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-17-01-flasher-pro-programmer\"\u003eFlasher PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-17-02-flasher-pro-xl-programmer\"\u003eFlasher PRO XL\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-flasher-hub-4-control-module-5-01-30\"\u003eFlasher Hub-4\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eControl unit for up to 4 Compacts (24 with USB hubs)\u003c\/td\u003e\n\u003ctd\u003eUSB-C, Ethernet, RS232\u003c\/td\u003e\n\u003ctd\u003e8 to 30 VDC\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-flasher-hub-4-control-module-5-01-30\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eA programmer screwed inside a bed-of-nails fixture, flashing a Cortex-M4 MCU and its external QSPI NOR as each board is tested. Four to twenty-four Compacts on a Flasher Hub programming panels of STM32 or RISC-V boards in parallel. A HIL rig that reflashes the device under test between runs.\u003c\/p\u003e\n\u003cp\u003eChoose the Compact for fixtures and gang systems; for a single bench station with network control, the Flasher PRO carries the same programming engine.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Flasher Compact for \u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug and programming tools\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-compact\/\"\u003eSEGGER Flasher Compact product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Compact\"\u003eSEGGER Knowledge Base: Flasher Compact\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Compact_V7\"\u003eSEGGER Knowledge Base: Flasher Compact V7\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Hub\"\u003eSEGGER Knowledge Base: Flasher Hub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173423327,"sku":"5.19.00","price":920.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-5-19-00-40212725399775.jpg?v=1689515404"},{"product_id":"segger-5-16-02-flasher-portable-plus-programmer","title":"SEGGER Flasher Portable PLUS Programmer","description":"\u003cp\u003eThe SEGGER Flasher Portable PLUS (part number 5.16.02) is a battery-powered handheld flash programmer with a 1.8\" colour screen, 128 MB of internal flash for up to 99 firmware images, a 1.2V to 5V target interface and target interface speeds up to 50 MHz. Its rechargeable lithium-ion battery runs for up to 10 hours, so firmware can be updated in the field without a PC or mains power. It suits service technicians reflashing installed equipment and engineers who need a stand-alone programmer away from the production line.\u003c\/p\u003e\n\n\u003ch2\u003eBattery-Powered Field Service Programmer\u003c\/h2\u003e\n\u003cp\u003eSEGGER built the Portable PLUS for equipment that cannot easily be connected to a network, such as wind turbines, remote installations and industrial machinery in hard-to-reach places. When a firmware issue is found, a technician can apply the patch on site with no PC and no access to a power supply. The battery charges automatically whenever the unit is connected over USB to a host computer or a standard USB power adapter, including a phone charger or power bank; a full charge takes about 70 minutes at 1 A. The unit can also run from USB power.\u003c\/p\u003e\n\n\u003ch2\u003eColour Screen and Stored Firmware Images\u003c\/h2\u003e\n\u003cp\u003eThe 1.8\" 128 x 160 pixel RGB TFT screen gives direct feedback and access to project data. The 128 MB internal flash stores as many as 99 firmware images, so one programmer can cover several products or firmware versions on a service round. Turbo mode downloads and programs at the same time, and SEGGER quotes programming speeds from 30 KB\/s to 1 MB\/s depending on the target hardware.\u003c\/p\u003e\n\n\u003ch2\u003eSupported Devices and Authorized Flashing\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists tens of thousands of supported devices in hundreds of device families, the same library as the other Flasher models, with supported cores including ARM, Cortex, PowerPC and Renesas RX. If the programmer is lost in the field, Authorized Flashing protects your firmware: once the set number of programming cycles is reached, the Flasher stops working for that project. The target connector is a male 20-pin IDC keyed box header with 0.1\" (2.54mm) pitch; pin assignments and adapter options are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon).\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eInternal rechargeable lithium-ion battery, or USB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBattery run time\u003c\/th\u003e\n\u003ctd\u003eUp to 10 hours of continuous use\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharging via USB\u003c\/th\u003e\n\u003ctd\u003e70 minutes at 1 A charging current\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eScreen\u003c\/th\u003e\n\u003ctd\u003e1.8\" 128 x 160 px RGB TFT, LED backlight\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 High-Speed, USB Type B\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMale 20-pin IDC keyed box header, 0.1\" (2.54mm) pitch, optional adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInternal flash memory\u003c\/th\u003e\n\u003ctd\u003e128 MB (TBW: 10 TB), up to 99 firmware images\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgramming speed\u003c\/th\u003e\n\u003ctd\u003e30 KB\/s to 1 MB\/s, depending on target hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTRef\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget cable length\u003c\/th\u003e\n\u003ctd\u003e20cm recommended and supplied; max. 2m, which may reduce target interface speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSize (without cables)\u003c\/th\u003e\n\u003ctd\u003e126mm x 70mm x 28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e140g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C (normal operation); +5°C to +45°C (battery charging)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +45°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eLess than 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher Portable PLUS\u003c\/li\u003e\n  \u003cli\u003eUSB cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo Ethernet or RS232 control. For a production station use the Flasher PRO, or the Flasher Compact inside a fixture.\u003c\/li\u003e\n  \u003cli\u003eBattery charging is limited to +5°C to +45°C, and storage to a maximum of +45°C, narrower than the +5°C to +60°C operating range.\u003c\/li\u003e\n  \u003cli\u003eActual programming speed depends on the target: SEGGER quotes 30 KB\/s to 1 MB\/s.\u003c\/li\u003e\n  \u003cli\u003eThe Renesas FINE interface works only in host-based mode, with a PC connected. Stand-alone support for Cortex devices is limited to CoreSight SoC-400 debug port setups.\u003c\/li\u003e\n  \u003cli\u003eCustomised versions are by arrangement with SEGGER; contact us with your requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher Portable PLUS Compared with Other SEGGER Flasher Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003cth\u003eHost and control interfaces\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher Portable PLUS (this product)\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, 1.8\" colour display\u003c\/td\u003e\n\u003ctd\u003eLi-ion battery or USB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-16-02-flasher-portable-plus-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-17-01-flasher-pro-programmer\"\u003eFlasher PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-17-02-flasher-pro-xl-programmer\"\u003eFlasher PRO XL\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-5-19-00-flasher-compact-programmer\"\u003eFlasher Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eField update of a Cortex-M controller inside a wind turbine nacelle, with no laptop and no mains supply. A service engineer carrying firmware for several product generations on one programmer. Reflashing Renesas RX-based machinery after a firmware fault, with Authorized Flashing capping how many units the image can be applied to.\u003c\/p\u003e\n\u003cp\u003eChoose the Portable PLUS for service and field work; for line-side programming, the Flasher PRO or Flasher Compact is the better fit.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Flasher Portable PLUS for \u003cspan data-ds-price=\"segger-5-16-02-flasher-portable-plus-programmer\"\u003e£1,100\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug and programming tools\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 20\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-portable-plus\/\"\u003eSEGGER Flasher Portable PLUS product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Portable_PLUS\"\u003eSEGGER Knowledge Base: Flasher Portable PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Portable_PLUS_V7\"\u003eSEGGER Knowledge Base: Flasher Portable PLUS V7\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173456095,"sku":"5.16.02","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-5-16-02-40212730183903.jpg?v=1689515217"},{"product_id":"segger-flasher-hub-4-control-module-5-01-30","title":"SEGGER Flasher Hub-4 Control Module","description":"\u003cp\u003eThe SEGGER Flasher Hub-4 (part number 5.01.30) is a gang programming control unit with four USB-C 2.0 High Speed downstream ports, each driving a Flasher Compact as an independent programming channel, scalable to 24 channels with external USB hubs. It is controlled over Ethernet, USB-C or RS232, has built-in web and FTP servers, and runs from an 8 to 30 VDC supply in a 125mm x 78mm x 25mm, 135g unit. It suits high-volume production lines that need several boards programmed in parallel without a PC on the line.\u003c\/p\u003e\n\n\u003ch2\u003eFour-Channel Gang Programmer, Scalable to 24 Channels\u003c\/h2\u003e\n\u003cp\u003eIn Direct Mode the Hub-4 manages up to four Flasher Compact modules plugged straight into its USB-C ports, with no extra USB hubs. Flex Mode connects up to 24 Flasher Compact modules through external USB hubs. SEGGER only provides technical support for setups built with SEGGER USB Hubs. Each channel works independently with its own programming image and settings, so different firmware variants can be programmed at the same time on one line. The supported CPU cores and target interfaces are those of the connected Flasher Compacts.\u003c\/p\u003e\n\n\u003ch2\u003eStand-Alone Operation via TELNET or RS232\u003c\/h2\u003e\n\u003cp\u003eChannels are set up once with SEGGER's Flasher software. After that initial configuration, the Hub-4 runs as a stand-alone unit controlled through TELNET or RS232 using the built-in ASCII command interface, which is designed for automation, so no desktop PC is needed on the line. The built-in web server handles control and configuration, and the FTP server takes new firmware images and configuration files remotely. Programming status shows on the LEDs of the connected Flashers, through the ASCII terminal interface or in the web interface. Unique data such as serial numbers, MAC addresses and digital signatures can be programmed into each target.\u003c\/p\u003e\n\n\u003ch2\u003eCompact Control Unit for Production Fixtures\u003c\/h2\u003e\n\u003cp\u003eInstead of a full chassis, the Hub-4 has a ground plate and a plexiglass cover, and SEGGER publishes housing STEP data for fixture installation. It runs from 8 to 30 VDC with reverse polarity protection; for maximum load the input supply must provide 12 VDC or more.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eUSB Flasher interface\u003c\/th\u003e\n\u003ctd\u003e4 x USB-C 2.0 High Speed (downstream)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interfaces\u003c\/th\u003e\n\u003ctd\u003eUSB-C 2.0 High Speed (upstream), USB Type-A (downstream), Ethernet, RS232 9-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChannels\u003c\/th\u003e\n\u003ctd\u003eUp to 4 Flasher Compact (Direct Mode); up to 24 with USB hubs (Flex Mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e8 to 30 VDC, reverse polarity protected, max. 30 W (depends on connected devices; 12 VDC or more for maximum load)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003eMax. 11.5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSize (without cables)\u003c\/th\u003e\n\u003ctd\u003e125mm x 78mm x 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e135g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eGround plate and plexiglass cover\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eLess than 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher Hub-4\u003c\/li\u003e\n  \u003cli\u003eUSB-C cable\u003c\/li\u003e\n  \u003cli\u003ePower connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe Hub-4 does not program targets itself. Each channel needs a Flasher Compact, sold separately.\u003c\/li\u003e\n  \u003cli\u003eSEGGER names only the Flasher Compact as the module the Flasher Hub controls.\u003c\/li\u003e\n  \u003cli\u003eMore than four channels need external USB hubs; SEGGER supports only setups with SEGGER USB Hubs.\u003c\/li\u003e\n  \u003cli\u003eA PC is still needed for the one-time channel configuration.\u003c\/li\u003e\n  \u003cli\u003eNo power supply unit is listed in the box, only the power connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher Hub-4 Compared with Related SEGGER Products\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDirect channels\u003c\/th\u003e\n\u003cth\u003eMax. channels\u003c\/th\u003e\n\u003cth\u003eSize (without cables)\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher Hub-4 (this product)\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e24 (Flex Mode)\u003c\/td\u003e\n\u003ctd\u003e125mm x 78mm x 25mm\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-flasher-hub-4-control-module-5-01-30\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-flasher-hub-12-control-module-5-01-20\"\u003eFlasher Hub-12\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e24 (Flex Mode)\u003c\/td\u003e\n\u003ctd\u003eFull chassis\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-flasher-hub-12-control-module-5-01-20\"\u003e£3,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\n\u003ca href=\"\/it\/products\/segger-5-19-00-flasher-compact-programmer\"\u003eFlasher Compact\u003c\/a\u003e (one channel)\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003e40g, four mounting holes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eFour Flasher Compacts programming a four-up panel of Cortex-M boards in one pass, triggered over TELNET from the line controller. Pushing a new release image to the hub's FTP server from a central production server without stopping the line. Writing unique serial numbers and MAC addresses into each board of a parallel run.\u003c\/p\u003e\n\u003cp\u003eChoose the Hub-4 when four parallel channels cover the line, or as a small controller for a Flex Mode system of up to 24 channels.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Flasher Hub-4 for \u003cspan data-ds-price=\"segger-flasher-hub-4-control-module-5-01-30\"\u003e£2,005\u003c\/span\u003e ex VAT, plus one Flasher Compact per channel. Ask us for a formal quotation for a complete gang system. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug and programming tools\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/tools\/flasher-hub-4\/\"\u003eSEGGER Flasher Hub-4 product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Hub\"\u003eSEGGER Knowledge Base: Flasher Hub\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-compact\/\"\u003eSEGGER Flasher Compact product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173521631,"sku":"5.01.30","price":2005.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-flasher-hub-4-5-01-30-perspective.png?v=1794818092"},{"product_id":"segger-8-06-26-avr-pdi-adapter","title":"SEGGER AVR PDI Adapter","description":"\u003cp\u003eThe SEGGER AVR PDI Adapter (part number 8.06.26) connects a SEGGER Flasher to AVR targets programmed over PDI, adapting the standard 20-pin 0.1\" connector to three AVR PDI headers: 6-pin 0.1\", 6-pin 0.05\" and 10-pin 0.1\". It can also power the target at 3.3V or 5V, selected by jumper. It suits production programming stations and test fixtures that program AVR PDI devices with a Flasher PRO, PRO XL, Compact or Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eThree AVR PDI Headers from One Flasher Adapter\u003c\/h2\u003e\n\u003cp\u003eOne adapter covers the 6-pin and 10-pin AVR PDI layouts, so a Flasher can move between boards with different headers without rewiring. SEGGER's pinout for the 6-pin header is 1 DATA, 2 VTRef, 5 CLK and 6 GND, with pins 3 and 4 not connected. On the 10-pin header, pin 3 is DATA, pin 4 VTRef, pin 6 CLK, and pins 2 and 10 GND; the remaining pins are not connected. The Flasher side uses the standard 20-pin 0.1\" connector; see our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eOptional 3.3V or 5V Target Supply\u003c\/h2\u003e\n\u003cp\u003eA jumper selects a 3.3V or 5V supply for the target. When the supply option is jumpered, the target is powered through the VTREF connection, so a bare board can be programmed without its own supply.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the AVR PDI Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgrammer-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connectors\u003c\/th\u003e\n\u003ctd\u003e6-pin 0.1\" AVR PDI; 6-pin 0.05\" AVR PDI; 10-pin 0.1\" AVR PDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eDATA, CLK, VTRef, GND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e3.3V or 5V, jumper selectable, via VTREF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible programmers\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER lists Flasher models only; J-Link is not on the compatibility list.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no maximum target supply current for the adapter.\u003c\/li\u003e\n  \u003cli\u003ePDI only. For AVR devices programmed over SPI, use the AVR SPI Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAVR PDI Adapter Compared with Related SEGGER Flasher Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003cth\u003eTarget connectors\u003c\/th\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAVR PDI Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eAVR PDI\u003c\/td\u003e\n\u003ctd\u003e6-pin 0.1\", 6-pin 0.05\", 10-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-26-avr-pdi-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-25-avr-spi-adapter\"\u003eAVR SPI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAVR SPI\u003c\/td\u003e\n\u003ctd\u003e6-pin 0.1\", 6-pin 0.05\", 10-pin\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-25-avr-spi-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-22-stm8-adapter\"\u003eSTM8 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSTM8 SWIM\u003c\/td\u003e\n\u003ctd\u003eSWIM connector, 10-pin\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper; external power input\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-22-stm8-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-rl78-programming-adapter-8-06-20\"\u003eRL78 14-Pin Programming Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78\u003c\/td\u003e\n\u003ctd\u003e14-pin Renesas E1\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the AVR PDI Adapter for \u003cspan data-ds-price=\"segger-8-06-26-avr-pdi-adapter\"\u003e£95\u003c\/span\u003e ex VAT. Check your target's PDI header against the pinouts above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/segger-avr-pdi-adapter\/\"\u003eSEGGER AVR PDI Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08022_Flasher\"\u003eSEGGER Knowledge Base: UM08022 Flasher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173619935,"sku":"8.06.26","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-26-avr-pdi-adapter-segger-debug-store-uk-40288786710751.jpg?v=1691249157"},{"product_id":"segger-8-06-33-infineon-auto-20-adapter","title":"SEGGER Infineon AUTO-20 Adapter","description":"\u003cp\u003eThe SEGGER Infineon AUTO-20 Adapter (part number 8.06.33) gives a SEGGER Flasher a JTAG connection to target hardware with an automotive connector, adapting the 20-pin 0.1\" JTAG connector to a 19-pin 0.05\" Samtec FTSH connector. SEGGER designed it for Infineon AURIX TC3xx microcontrollers, and it also connects a Flasher to other targets whose connector uses the same pinout. It suits production programming of AURIX TC3xx target boards on a Flasher PRO, PRO XL, Compact or Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eFlasher JTAG Access to AURIX TC3xx Automotive Connectors\u003c\/h2\u003e\n\u003cp\u003eThe adapter carries VTREF, TRST, TDI, TMS, TCK, TDO and RESET from the Flasher to the 19-pin automotive connector; SEGGER's pinout drawing marks the remaining positions RFU. Any target that follows the same connector pinout can be programmed through it, not only AURIX TC3xx. The Flasher side uses the standard 20-pin 0.1\" connector; see our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the Infineon AUTO-20 Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgrammer-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" (2.54mm) JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e19-pin 0.05\" Samtec FTSH\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eVTREF, TRST, TDI, TMS, TCK, TDO, RESET, RFU\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTargets\u003c\/th\u003e\n\u003ctd\u003eInfineon AURIX TC3xx; other targets with the same connector pinout\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible programmers\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER lists Flasher models only; J-Link is not on the compatibility list.\u003c\/li\u003e\n  \u003cli\u003eJTAG only. For the 10-pin DAP connector on AURIX TC2xx, TC3xx and TC4xx targets, use the Infineon AURIX DAP-10 Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes the pinout as a drawing only and gives no electrical specification beyond the connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAUTO-20 Adapter Compared with Related SEGGER Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eInterface and targets\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eInfineon AUTO-20 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e19-pin 0.05\" Samtec FTSH, automotive pinout\u003c\/td\u003e\n\u003ctd\u003eJTAG; Infineon AURIX TC3xx\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-33-infineon-auto-20-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-infineon-aurix-dap-10-adapter-80638\"\u003eInfineon AURIX DAP-10 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin FTSH\u003c\/td\u003e\n\u003ctd\u003eDAP; Infineon AURIX TC2xx, TC3xx, TC4xx and C167\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-infineon-aurix-dap-10-adapter-80638\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-00-19-pin-cortex-m-adapter\"\u003e19-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19-pin 0.05\" Samtec FTSH, ARM-defined pinout\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD and SWO; Cortex-M targets\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-00-19-pin-cortex-m-adapter\"\u003e£38\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-ppc-14-pin-jtag-adapter-80607\"\u003ePPC-14 JTAG Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin\u003c\/td\u003e\n\u003ctd\u003eJTAG; Power Architecture (PowerPC) targets\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-ppc-14-pin-jtag-adapter-80607\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Infineon AUTO-20 Adapter for \u003cspan data-ds-price=\"segger-8-06-33-infineon-auto-20-adapter\"\u003e£64\u003c\/span\u003e ex VAT. Check your target's connector pinout against SEGGER's drawing, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/infineon-auto-20-adapter-1\/\"\u003eSEGGER Infineon AUTO-20 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08022_Flasher\"\u003eSEGGER Knowledge Base: UM08022 Flasher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173652703,"sku":"8.06.33","price":64.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-33-40215838359775.jpg?v=1689584519"},{"product_id":"segger-8-06-25-avr-spi-adapter","title":"SEGGER AVR SPI Adapter","description":"\u003cp\u003eThe SEGGER AVR SPI Adapter (part number 8.06.25) connects a SEGGER Flasher to Microchip AVR devices over SPI, adapting the standard 20-pin 0.1\" connector to the 6-pin and 10-pin Microchip headers. Three target connectors are provided: 10-pin, 6-pin at 100 mil (2.54mm) and 6-pin at 50 mil (1.27mm). The adapter can also power the target at 3.3V or 5V, selected by jumper, for production programming with a Flasher PRO, PRO XL, Compact or Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eIn-System Programming of Microchip AVR over SPI\u003c\/h2\u003e\n\u003cp\u003eThe adapter carries the AVR SPI programming signals, MOSI, MISO, SCK and RESET, together with VCC and GND, from the Flasher to the target header. With both 6-pin pitches and the 10-pin layout on one board, a single programming station can serve AVR targets with either header style. The Flasher side uses the standard 20-pin 0.1\" connector; see our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eOptional 3.3V or 5V Target Supply\u003c\/h2\u003e\n\u003cp\u003eAn on-board regulator and a jumper give a choice of 3.3V or 5V for the target. When the supply option is jumpered, the target is powered through the VTREF connection, so an unpowered board can be programmed straight off the line.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the AVR SPI Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgrammer-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connectors\u003c\/th\u003e\n\u003ctd\u003e10-pin; 6-pin 100 mil (2.54mm); 6-pin 50 mil (1.27mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eMOSI, MISO, SCK, RESET, VCC, GND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e3.3V or 5V, jumper selectable, via VTREF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported devices\u003c\/th\u003e\n\u003ctd\u003eMicrochip AVR devices with SPI programming\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible programmers\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER lists Flasher models only; J-Link is not on the compatibility list.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no maximum target supply current and no pitch for the 10-pin header.\u003c\/li\u003e\n  \u003cli\u003eSPI only. For AVR devices programmed over PDI, use the AVR PDI Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAVR SPI Adapter Compared with Related SEGGER Flasher Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003cth\u003eTarget connectors\u003c\/th\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAVR SPI Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eAVR SPI\u003c\/td\u003e\n\u003ctd\u003e10-pin, 6-pin 0.1\", 6-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-25-avr-spi-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-26-avr-pdi-adapter\"\u003eAVR PDI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAVR PDI\u003c\/td\u003e\n\u003ctd\u003e6-pin 0.1\", 6-pin 0.05\", 10-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-26-avr-pdi-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-22-stm8-adapter\"\u003eSTM8 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSTM8 SWIM\u003c\/td\u003e\n\u003ctd\u003eSWIM connector, 10-pin\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper; external power input\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-22-stm8-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-rl78-programming-adapter-8-06-20\"\u003eRL78 14-Pin Programming Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78\u003c\/td\u003e\n\u003ctd\u003e14-pin Renesas E1\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the AVR SPI Adapter for \u003cspan data-ds-price=\"segger-8-06-25-avr-spi-adapter\"\u003e£66\u003c\/span\u003e ex VAT. Check that your AVR device programs over SPI and that your Flasher is on the list above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/segger-avr-spi-adapter\/\"\u003eSEGGER AVR SPI Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08022_Flasher\"\u003eSEGGER Knowledge Base: UM08022 Flasher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173685471,"sku":"8.06.25","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-25-40288780681439.jpg?v=1691248976"},{"product_id":"segger-rl78-programming-adapter-8-06-20","title":"SEGGER RL78 14-Pin Programming Adapter (8.06.20)","description":"\u003cp\u003eThe SEGGER RL78 14-Pin Programming Adapter (part number 8.06.20) connects a SEGGER Flasher to Renesas RL78 targets, adapting the standard 20-pin 0.1\" connector to the 14-pin E1 connector defined by Renesas. It can power the target at 3.3V or 5V, selected by jumper, and SEGGER lists 26 supported RL78 cores across the D, F, G, I and L groups. It is built for flash programming on a Flasher PRO, PRO XL, Compact or Portable PLUS, in production or at the bench.\u003c\/p\u003e\n\n\u003ch2\u003eFlash Programming of RL78 Through the Renesas E1 Connector\u003c\/h2\u003e\n\u003cp\u003eThe adapter plugs into the Flasher's 20-pin 0.1\" connector and presents the Renesas 14-pin E1 header to the target, so an RL78 board laid out for the Renesas E1 can be programmed with a Flasher without rewiring. SEGGER lists these cores: RL78\/D1A; RL78\/F12, F13, F14 and F15; RL78\/G10, G11, G12, G13 and G14; RL78\/G1A, G1C, G1D, G1E, G1F, G1G and G1H; RL78\/I1A, I1B, I1C, I1D and I1E; and RL78\/L12, L13, L1A and L1C.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Supply and TOOL0 Pull-Up\u003c\/h2\u003e\n\u003cp\u003eA jumper selects a 3.3V or 5V target supply. When the supply option is jumpered, the target is powered through the VTREF connection. RL78 TOOL0 pins are open drain and need an external pull-up resistor, which evaluation boards usually provide; for targets without one, the adapter has an additional solder bridge between VTREF and TOOL0 where a pull-up resistor can be placed.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the RL78 14-Pin Programming Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgrammer-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e14-pin E1 connector (Renesas standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e3.3V or 5V, jumper selectable, via VTREF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTOOL0 pull-up\u003c\/th\u003e\n\u003ctd\u003eSolder bridge between VTREF and TOOL0 for an optional pull-up resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported cores\u003c\/th\u003e\n\u003ctd\u003e26 RL78 cores: D1A; F12 to F15; G10 to G14; G1A, G1C to G1H; I1A to I1E; L12, L13, L1A, L1C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eFlash programming only\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible programmers\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlash programming only: SEGGER states the adapter cannot be used with a J-Link and cannot be used to debug RL78 devices.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no maximum target supply current for the adapter.\u003c\/li\u003e\n  \u003cli\u003eTargets without a TOOL0 pull-up need a resistor fitted, either on the board or at the adapter's solder bridge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRL78 Adapter Compared with Related SEGGER Renesas and Flasher Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTargets\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRL78 14-Pin Programming Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78, Flasher only\u003c\/td\u003e\n\u003ctd\u003e14-pin Renesas E1\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-01-renesas-rx-adapter\"\u003eRenesas RX Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RX600, RX200, RX100; J-Link or Flasher\u003c\/td\u003e\n\u003ctd\u003eRenesas RX connector\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-01-renesas-rx-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-renesas-m16c-family-10-pin-adapter-8-06-40\"\u003eRenesas M16C Family 10-Pin Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas M16C, Flasher PRO\u003c\/td\u003e\n\u003ctd\u003eRenesas 10-pin programming connector\u003c\/td\u003e\n\u003ctd\u003eNot stated\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-renesas-m16c-family-10-pin-adapter-8-06-40\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-22-stm8-adapter\"\u003eSTM8 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eST STM8, Flasher only\u003c\/td\u003e\n\u003ctd\u003eSWIM connector, 10-pin\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper; external power input\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-22-stm8-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the RL78 14-Pin Programming Adapter for \u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e ex VAT. Check your RL78 core against the list above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/rl78-adapter\/\"\u003eSEGGER RL78 14-Pin Programming Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08022_Flasher\"\u003eSEGGER Knowledge Base: UM08022 Flasher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173751007,"sku":"8.06.20","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-20-40288618643679.jpg?v=1691239080"},{"product_id":"segger-8-06-22-stm8-adapter","title":"SEGGER STM8 Adapter","description":"\u003cp\u003eThe SEGGER STM8 Adapter (part number 8.06.22) connects a SEGGER Flasher to STM8 devices for flash programming, converting the standard 20-pin 0.1\" connector to a SWIM connector and a standard 10-pin connector. It can power the target at 3.3V or 5V, selected by jumper, and has an external input connector for supplying the target board from another source. It is built for STM8 production programming on a Flasher PRO, PRO XL, Compact or Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eSTM8 Flash Programming over SWIM\u003c\/h2\u003e\n\u003cp\u003eThe adapter takes the Flasher's 20-pin 0.1\" connector and presents both a SWIM connector and a standard 10-pin connector to the target; SEGGER publishes 4-pin and 10-pin pinout drawings. SEGGER tested Flashers with a 4-way ERNI ribbon cable, part number 839016, 100mm long with keyed female headers on both ends, for a total length of about 120mm. The Flasher side uses the standard 20-pin 0.1\" connector; see our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eThree Ways to Power the Target\u003c\/h2\u003e\n\u003cp\u003eA jumper selects a 3.3V or 5V target supply from the adapter; when the supply option is jumpered, the target is supplied through the VCCT connection. Alternatively, the target board can be powered through the adapter's external input connector.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the STM8 Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgrammer-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connectors\u003c\/th\u003e\n\u003ctd\u003eSWIM connector; standard 10-pin connector\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e3.3V or 5V, jumper selectable, via VCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExternal power\u003c\/th\u003e\n\u003ctd\u003eExternal input connector for powering the target board\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCable tested by SEGGER\u003c\/th\u003e\n\u003ctd\u003e4-way ERNI 839016, 100mm, keyed female headers, about 120mm total\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eFlash programming only\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible programmers\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlash programming only: SEGGER states the adapter cannot be used with a J-Link and cannot be used to debug STM8 devices.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no maximum target supply current for the adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER does not list a cable in the box; the ERNI 839016 cable is the one SEGGER tested.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSTM8 Adapter Compared with Related SEGGER Flasher Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003cth\u003eTarget connectors\u003c\/th\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSTM8 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eSTM8 SWIM\u003c\/td\u003e\n\u003ctd\u003eSWIM connector, 10-pin\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper; external power input\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-22-stm8-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-rl78-programming-adapter-8-06-20\"\u003eRL78 14-Pin Programming Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78\u003c\/td\u003e\n\u003ctd\u003e14-pin Renesas E1\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-25-avr-spi-adapter\"\u003eAVR SPI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAVR SPI\u003c\/td\u003e\n\u003ctd\u003e10-pin, 6-pin 0.1\", 6-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-25-avr-spi-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-26-avr-pdi-adapter\"\u003eAVR PDI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAVR PDI\u003c\/td\u003e\n\u003ctd\u003e6-pin 0.1\", 6-pin 0.05\", 10-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-26-avr-pdi-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the STM8 Adapter for \u003cspan data-ds-price=\"segger-8-06-22-stm8-adapter\"\u003e£63\u003c\/span\u003e ex VAT. Check that your Flasher is on the list above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/stm8-adapter\/\"\u003eSEGGER STM8 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08022_Flasher\"\u003eSEGGER Knowledge Base: UM08022 Flasher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173783775,"sku":"8.06.22","price":63.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-22-40212790706399.jpg?v=1689516485"},{"product_id":"segger-8-06-06-ti-cti-20-adapter","title":"SEGGER TI-CTI-20 Adapter","description":"\u003cp\u003eThe SEGGER TI-CTI-20 Adapter (part number 8.06.06) adapts the standard J-Link 20-pin 0.1\" connector to the TI CTI-20 connector, so a J-Link or Flasher can connect to Texas Instruments evaluation boards with a CTI-20 header, such as the AM335x evaluation module. A key on pin 6 stops the adapter being fitted the wrong way round. It suits JTAG debug and flash programming on TI evaluation hardware with a SEGGER probe already on the bench.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link and Flasher Access to TI CTI-20 Headers\u003c\/h2\u003e\n\u003cp\u003eThe probe side plugs into the standard J-Link 20-pin 0.1\" connector found on most J-Link models, and into the same 20-pin connector on Flasher. The target side presents the TI CTI-20 connector. SEGGER's schematic carries VTREF, TRST, TDI, TMS, TCK, RTCK, TDO and nSRST to the target, with EMU0 and EMU1 tied to GND. Probe-side pin assignments are in our \u003ca href=\"\/it\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eListed for the TI AM335x Evaluation Module\u003c\/h2\u003e\n\u003cp\u003eSEGGER names the AM335x evaluation module as an example target. Its Knowledge Base page for the TI AM3359 states that the debug probe can be connected using the TI CTI-20 adapter, and lists the TMDXEVM3358 as tested hardware.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible SEGGER Probes and Programmers\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter for Flasher PRO, Flasher PRO XL, Flasher Compact, Flasher ARM, Flasher Portable PLUS and Flasher Secure, and for J-Link PRO PoE, J-Link PRO, J-Link ULTRA+, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.06\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link\/Flasher 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eTI CTI-20 connector\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eKeying\u003c\/th\u003e\n\u003ctd\u003eKey on pin 6\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals (SEGGER schematic)\u003c\/th\u003e\n\u003ctd\u003eVTREF, TRST, TDI, TMS, TCK, RTCK, TDO, nSRST; EMU0 and EMU1 tied to GND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExample target\u003c\/th\u003e\n\u003ctd\u003eTI AM335x evaluation module (TMDXEVM3358 listed as tested)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, PRO XL, Compact, ARM, Portable PLUS, Secure\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003eJ-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter, so we state only the TI-CTI-20 Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER's schematic shows the JTAG signal set only; SEGGER lists no SWD or trace connection for this adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no dimensions and lists no cable for it.\u003c\/li\u003e\n  \u003cli\u003eFor TI targets with a 14-pin 0.1\" JTAG header, use the 14-Pin TI Adapter. For Jacinto 7 boards with a MIPI-60 header, use the MIPI-60 Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTI-CTI-20 Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eSignals\u003c\/th\u003e\n\u003cth\u003eCable listed by SEGGER\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTI-CTI-20 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eTI CTI-20\u003c\/td\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003ctd\u003eNone listed\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-06-ti-cti-20-adapter\"\u003e£78\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-8-06-03-14-pin-ti-adapter\"\u003e14-Pin TI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTI 14-pin, 0.1\"\u003c\/td\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003ctd\u003e0.1\" 14-pin ribbon cable (18cm)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-03-14-pin-ti-adapter\"\u003e£62\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/it\/products\/segger-6-06-42-mipi-60-adapter-uk\"\u003eMIPI-60 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMIPI-60 (TI Jacinto 7)\u003c\/td\u003e\n\u003ctd\u003eJTAG\/SWD, up to 4-bit trace\u003c\/td\u003e\n\u003ctd\u003eNone listed\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-06-42-mipi-60-adapter-uk\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the TI-CTI-20 Adapter for \u003cspan data-ds-price=\"segger-8-06-06-ti-cti-20-adapter\"\u003e£78\u003c\/span\u003e ex VAT. Check your board's CTI-20 header against SEGGER's schematic, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/it\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/ti-cti-20-adapter\/\"\u003eSEGGER TI-CTI-20 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003eSEGGER J-Link related pricing: adapters\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/TI_AM3359\"\u003eSEGGER Knowledge Base: TI AM3359\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173816543,"sku":"8.06.06","price":78.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-06-40280536711391.jpg?v=1691070420"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/lg-logo-segger.jpg?v=1724338144","url":"https:\/\/thedebugstore.com\/it\/collections\/segger-microcontroller-gmbh-catalogue-debug-store.oembed?page=3","provider":"Debug Store","version":"1.0","type":"link"}