{"title":"Rotary Encoder Click Boards™","description":"\u003cp data-mce-fragment=\"1\"\u003eWelcome to The Debug Store, your one-stop destination for all your electronic component needs. We are proud to introduce the MikroE y Encoder Click Boards™, a cutting-edge solution designed to enhance your projects with high-precision encoder functionality.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhether you're a hobbyist, a student, or a professional developer, these encoder click boards are essential tools that provide accurate rotational position sensing. The MikroE y Encoder Click Boards™ offer seamless integration with various microcontroller platforms, making them ideal for a wide range of applications, including robotics, automation, and control systems.\u003c\/p\u003e","products":[{"product_id":"mikroe-1822-rotary-g-click-board-uk","title":"Rotary G Click Board™","description":"\u003ch3\u003eIC\/module: 15-Pulse Incremental Rotary Encoder\u003c\/h3\u003e\n\n\u003cp\u003e\u003cspan class=\"fr-video fr-fvc fr-dvb fr-draggable\"\u003e\u003ciframe allowfullscreen=\"\" class=\"fr-draggable\" frameborder=\"0\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/YktKqwAJhko?wmode=opaque\" width=\"640\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eRotary G Click Board™\u003c\/strong\u003e features a rotary encoder that can be spun round continuously to make a rotation into 15 discrete incremental steps. Featuring 30 detents, this incremental rotary encoder outputs A and B signals that are out of phase to each other.\u003c\/p\u003e\n\n\u003ch3\u003eRing of 16 Green LEDs\u003c\/h3\u003e\n\n\u003cp\u003eThe rotary encoder is encircled by a ring featuring 16 LEDs in eye-catchy green colour. The LED ring provides visual feedback to the user and controlled through SPI lines.\u003c\/p\u003e\n\n\u003ch3\u003eCommunication to MCU through SPI Interface\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eRotary G Click Board™\u003c\/strong\u003e communicates with the target board microcontroller via mikroBUS SPI lines (CS, SCK, MISO, MOSI), and three additional lines to deliver the Encoder info: ENCB OUT, ENCA OUT and SW (instead of the typical AN, RST and INT pins, respectively).\u003c\/p\u003e\n\n\u003ch4\u003eAdditional LED Colours Available\u003c\/h4\u003e\n\n\u003cp\u003eWith the green LED version, the \u003cstrong\u003eRotary G Click Board™\u003c\/strong\u003e, MikroElektronika has launched another Click Board™ in the colour LED Click Board™ range. The other available Click Board™s include two colours: red (Rotary R) and blue (Rotary B).\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768343552189,"sku":"MIKROE-1822","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-rotary-g-click-board-30231426957501.jpg?v=1685040422"},{"product_id":"mikroe-1824-rotary-b-click-board-uk","title":"Rotary B Click Board™","description":"\n\n\u003ch3\u003eIC\/module: 15-Pulse Incremental Rotary Encoder\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eRotary B Click Board™\u003c\/strong\u003e\u003c\/em\u003e features a rotary encoder that can be spun round continuously to make a rotation into 15 discrete incremental steps. Featuring 30 detents, this incremental rotary encoder outputs A and B signals that are out of phase to each other.\u003c\/p\u003e\n\n\u003ch3\u003eRing of 16 Blue LEDs\u003c\/h3\u003e\n\n\u003cp\u003eThe rotary encoder is encircled by a ring featuring 16 LEDs in stunning blue colour. The LED ring provides visual feedback to the user and controlled through SPI lines.\u003c\/p\u003e\n\n\u003ch3\u003eCommunication to MCU through SPI Interface\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eRotary B Click Board™\u003c\/strong\u003e communicates with the target board microcontroller via mikroBUS SPI lines (CS, SCK, MISO, MOSI), and three additional lines to deliver the Encoder info: ENCB OUT, ENCA OUT and SW (instead of the typical AN, RST and INT pins, respectively).\u003c\/p\u003e\n\n\u003ch3\u003eAdditional LED Colours Available\u003c\/h3\u003e\n\n\u003cp\u003eWith the blue LED version, the \u003cstrong\u003eRotary B Click Board™\u003c\/strong\u003e, MikroElektronika has launched its third colour in the line of its flashy Click Board™s. The two previous Click Board™s in the same family include two colours: green (Rotary G),red (Rotary R) and yellow (Rotary Y).\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768343650493,"sku":"MIKROE-1824","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-rotary-b-click-board-30231427580093.jpg?v=1685040586"},{"product_id":"mikroe-1823-rotary-r-click-board-uk","title":"Rotary R Click Board™","description":"\n\n\u003ch3\u003eIC\/module: 15-Pulse Incremental Rotary Encoder\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eRotary R Click Board™\u003c\/strong\u003e\u003c\/em\u003e features a rotary encoder that can be spun round continuously to make a rotation into 15 discrete incremental steps. Featuring 30 detents, this incremental rotary encoder outputs A and B signals that are out of phase to each other.\u003c\/p\u003e\n\n\u003ch3\u003eRing of 16 Red LEDs\u003c\/h3\u003e\n\n\u003cp\u003eThe rotary encoder is encircled by a ring featuring 16 LEDs in fiery red colour. The LED ring provides visual feedback to the user and controlled through SPI lines.\u003c\/p\u003e\n\n\u003ch3\u003eCommunication to MCU through SPI Interface\u003c\/h3\u003e\n\n\u003cp\u003eThe Rotary R Click Board™ communicates with the target board microcontroller via mikroBUS SPI lines (CS, SCK, MISO, MOSI), and three additional lines to deliver the Encoder info: ENCB OUT, ENCA OUT and SW (instead of the typical AN, RST and INT pins, respectively).\u003c\/p\u003e\n\n\u003ch3\u003eAdditional LED Colours Available\u003c\/h3\u003e\n\n\u003cp\u003eWith the red LED version, the \u003cstrong\u003eRotary R Click Board™\u003c\/strong\u003e, MikroElektronika has launched its third colour in the line of its flashy Click Board™s. The two previous Click Board™s in the same family include two colours: green (Rotary G) and blue (Rotary B).\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768343716029,"sku":"MIKROE-1823","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-rotary-r-click-board-30231377281213.jpg?v=1685040589"},{"product_id":"mikroe-1825-rotary-y-click-board-uk","title":"Rotary Y Click Board™","description":"\n\n\u003ch3\u003eIC\/module: 15-Pulse Incremental Rotary Encoder\u003c\/h3\u003e\n\n\u003cp\u003eRotary Y Click Board™ features a rotary encoder that can be spun round continuously to make a rotation into 15 discrete incremental steps. Featuring 30 detents, this incremental rotary encoder outputs A and B signals that are out of phase to each other.\u003c\/p\u003e\n\n\u003ch3\u003eRing of 16 Yellow LEDs\u003c\/h3\u003e\n\n\u003cp\u003eThe rotary encoder is encircled by a ring featuring 16 LEDs in vibrant yellow colour. The LED ring provides visual feedback to the user and controlled through SPI lines.\u003c\/p\u003e\n\n\u003ch3\u003eCommunication to MCU through SPI Interface\u003c\/h3\u003e\n\n\u003cp\u003eRotary Y Click Board™ communicates with the target board microcontroller via mikroBUS SPI lines (CS, SCK, MISO, MOSI), and three additional lines to deliver the Encoder info: ENCB OUT, ENCA OUT and SW (instead of the typical AN, RST and INT pins, respectively).\u003c\/p\u003e\n\n\u003ch3\u003eAdditional LED Colours Available\u003c\/h3\u003e\n\n\u003cp\u003eWith the yellow LED version, Rotary Y Click Board™, MikroElektronika has launched its third colour in the line of its flashy Click Board™s. The two previous Click Board™s in the same family include two colours: green (Rotary G) and blue (Rotary B).\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768343748797,"sku":"MIKROE-1825","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-rotary-y-click-board-28813637091517.jpg?v=1685128075"},{"product_id":"mikroe-1917-counter-click-board-uk","title":"Counter Click Board™","description":"\n\n\u003cp\u003eThe\u003cstrong\u003e Counter Click Board™\u003c\/strong\u003e is an accessory board designed to keep the DC motor shafts in check. Featuring the LS7366R quadrature counter, Counter Click Board™ uses the mikroBUS SPI interface (CSK, MISO, MOSI), plus enable (CNT EN) and interrupt (LFLAG or DFLAG) pins for communication with the target board microcontroller. The 32-bit quadrature counter is to be used with a rotary encoder to quantify the speed and direction of rotation of DC motor shafts. It enables the user to calculate the number of rotations of a shaft precise when things get blur to the naked human eye. The rotary encoder on a DC motor outputs ENCA and ENCB signals which are out of phase to each other. For decoding the signal, the other end of these wires is connected to the pinout on the top of the board for interfacing with incremental encoders. In addition to ENCA and ENB, the pinout aboard the Counter Click Board™ also an ENCI pin, which is a programmable index. The board is designed to operate using either a 3.3V or 5V power supply.\u003c\/p\u003e\n\n\u003ch2\u003eIC\/Module: LS7366R 32-bit CMOS Counter\u003c\/h2\u003e\n\n\u003cp\u003eLS7366R is a quadrature counter with a high 32-bit resolution. The CMOS counter offers direct interface for quadrature clocks from incremental encoders. It also interfaces with the index signals from incremental encoders to perform a variety of marker functions. It uses a 4-wire SPI\/MICROWIRE bus for communication with a host microprocessor.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does it Work?\u003c\/h2\u003e\n\n\u003cp\u003eA rotary encoder on a DC motor outputs ENCA and ENCB signals which are out of phase to each other, ideally by 90.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768359870653,"sku":"MIKROE-1917","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-counter-click-board-30260489519293.jpg?v=1685209431"},{"product_id":"rotary-o-click-board-mikroe-2380-uk","title":"Rotary O Click Board™","description":"\u003cp\u003eThe \u003cstrong\u003eRotary O Click Board™\u003c\/strong\u003e carries a 15-pulse incremental rotary encoder with detents, surrounded by a ring of 16 orange LEDs. Its a perfect solution for adding a precision input knob to your design.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768370684093,"sku":"MIKROE-2380","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-rotary-o-click-board-23151675539645.jpg?v=1685040596"},{"product_id":"mikroe-3299-knob-g-click-board-uk","title":"Knob G Click Board™","description":"\u003cp\u003eFeaturing highly advanced LED driver IC which offers an unparalleled flexibility, 24 individual LEDs which form a ring around the encoder, a high-quality rotary encoder with push-button by ALPS, and the debouncing circuitry based on a triple Schmitt trigger IC, the \u003cstrong\u003eKnob G Click Board™\u003c\/strong\u003e is an ideal solution for building various HMI applications where precise input is required. Also, it can be used to add various interesting visual effects to any application.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does The Knob G Click Board™ Work?\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eKnob G Click Board™\u003c\/strong\u003e consists of two distinctive sections: the first section is the rotary quadrature encoder with its outputs routed to the GPIO pins of the mikroBUS. The encoder is debounced by a dedicated circuitry composed of passive elements and a triple inverting Schmitt trigger IC. The second section is the LED driver IC, with accompanying LEDs positioned in a form of a ring around the encoder, making them perfectly suited for encoder position indicators.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Knob G click\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/www.mikroe.com\/img\/images\/knob-g-click-inner-img.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eKnob G Click Board™\u003c\/strong\u003e uses the EC12D, a 15-pulse incremental rotary encoder with a push-button, from ALPS. This encoder has very good mechanical specifications: debouncing time for its internal switches goes down to 2ms, and it can withstand a huge number of switching cycles, up to 30,000. The supporting debouncing circuitry allows contacts to fully settle before the output is triggered.\u003c\/p\u003e\n\n\u003cp\u003eWhen encoder contacts are closed, the capacitor will start to discharge through the resistor, via the contacts, and to the GND. The Schmitt trigger connected to the capacitor will output a LOW logic level when its low voltage threshold level is reached; and vice versa - when encoder contacts are open, the capacitor will start to charge through the resistor, and the Schmitt trigger will output a HIGH logic level, when its high voltage threshold level is reached. This allows reading the states of two encoder contacts and one push-button contact directly from the code, with no bulky software debouncing applied. This makes Knob G click usable directly within the the interrupt-on-change ISR, allowing an absolute accuracy and no skipped pulses (which might occur when a regular software polling technique is used). Output pins of the encoder contacts are labelled as ENA and ENB for the quadrature encoder contacts, and SW for the push-button contact. These pins are routed to the AN, CS, and INT pin of the Mirko BUS, respectively.\u003c\/p\u003e\n\n\u003cp\u003eThe LED ring is composed of 24 individual green LEDs which are driven by the PCA9956B, an 8-bit, 24-channel, constant current LED driver, from NXP. This driver IC has many LED driving features, including constant current sinking capability, which greatly simplifies the design: maximum current through LEDs is determined by a single resistor. The PCA9956B has registers for controlling each channel individually, along with a single register which controls all channels at once. It supports PWM-mode dimming, as well as the current-mode dimming (by scaling down the maximum LED current). The PCA9956B can use a lower frequency signal from a secondary integrated PWM oscillator to modulate the PWM dimming signal. While the PWM frequency of the driver is fixed at 31.25kHz reducing the visible LED flickering completely, the modulating low-frequency signal can range from 0 to 122Hz, allowing interesting blinking effects to be produced without using the computing power of the microcontroller (MCU). The driver produces smooth dimming of LEDs, since the resolution of the PWM duty cycle is 8 bits. More details and features can be found found in the PCA9956B datasheet, in the download section, below.\u003c\/p\u003e\n\n\u003cp\u003eThe OE pin of the PCA9956B is routed to the PWM pin of the mikroBUS. When a LOW logic level is applied to the OE pin, LED outputs will be enabled. This pin is pulled to a HIGH logic level by a resistor. The OE pin can also be driven by an external PWM signal, offering an alternative way of dimming all LEDs at once.\u003c\/p\u003e\n\n\u003cp\u003eLED driver IC can be reset by pulling the RST pin to a LOW logic level. This pin is pulled to a HIGH level by the resistor. The reset pulse can be very short (2.5 µs) but the device will not be ready for another 1.5 ms after the pulse. Besides the hardware reset, the PCA9956B also supports a software reset, which is required if the device is going to be operated in the fast I2C mode (including clock speed above 100kHz). The datasheet of the PCA9956B offers a detailed explanation on performing the software reset and using the fast I2C mode (FM+)\u003c\/p\u003e\n\n\u003cp\u003eThe PCA9956B IC uses the 3.3V rail of the mikroBUS as the LED power supply, so there is no significant voltage drop causing thermal dissipation. However, turning all LEDs ON at once with the maximum current set in the current registers, might cause the Knob G click to dissipate some heat. This is expected, as the thermal dissipation of each channel is adding up to the sum dissipation of the entire IC. The PCA9956B IC features thermal shutdown protection, along with the set of error reporting features. The PCA9956B can report both open-circuit event and short-circuit event for each LED. These errors will be written in the ERR registers, one for each LED channel. The datasheet explains how to interpret the values of these registers.\u003c\/p\u003e\n\n\u003cp\u003eSlave I2C address of the PCA9956B device can be selected by using three SMD jumpers, grouped under the ADDR label. The PCA9956B allows its slave I2C address to be selected from a wide range of 125 different values. Each of the address pins (A0 to A3) can be left floating, pulled up, pulled down and shorted to VCC or GND. However, some I2C addresses are reserved, so they should be used with care. The datasheet of the PCA9956B offers tables with resistor values for each state of the address pins and reserved I2C addresses. Knob G click uses three 0 Ω SMD jumpers to set the states of these address pins.\u003c\/p\u003e\n\n\u003cp\u003eThe logic voltage level can be selected by the SMD jumper, labelled as VCCIO. This jumper determines levels for the logic signals from Schmitt triggers, as well as for the I2C interface of the \u003cstrong\u003eKnob G Click Board™\u003c\/strong\u003e . This allows it to be interfaced with a wide range of different MCUs, both compatible with 3.3V and 5V logic voltage levels.\u003c\/p\u003e\n\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eRotary encoder\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eThe \u003cstrong\u003eKnob G Click Board™\u003c\/strong\u003e is an ideal solution for building various HMI applications, where a precise input is required. Also, it can also be used to add various interesting visual effects to any application.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003ePCA9956B, an 8-bit, 24-channel, constant current LED driver, from NXP; 74HC3G14DC, a triple inverting Schmitt trigger IC, from Nexperia\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eA reliable symmetrical debouncing circuit, a very flexible and powerful PWM LED driver which features several different dimming options, constant current through LEDs can be selected by a single resistor, smooth dimming in 256 steps for each LED channel, 24-segment LED ring that can be used for the visual feedback, etc.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eGPIO,I2C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003emikroBUS\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eClick board size\u003c\/td\u003e\n            \u003ctd\u003eL (57.15 x 25.4 mm)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e3.3V or 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePINOUT DIAGRAM\u003c\/h3\u003e\n\n\u003cp lang=\"en-us\" xml:lang=\"en-us\"\u003eThis table shows how the pinout on the \u003cstrong\u003eKnob G Click\u003c\/strong\u003e corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).\u003c\/p\u003e\n\n\u003ctable width=\"549\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth colspan=\"4\"\u003e\u003cimg alt=\"Mikrobus logo.png\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/mikrobus\/mikroBUS-logo-black.png\"\u003e\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eEncoder OUT A\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eENA\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003eAN\u003c\/td\u003e\n            \u003ctd\u003ePWM\u003c\/td\u003e\n            \u003ctd\u003e16\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eOE\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eControl PWM Signal\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePCA9956B Reset\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eRST\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n            \u003ctd\u003eRST\u003c\/td\u003e\n            \u003ctd\u003eINT\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSW\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eEncoder Button OUT\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eEncoder OUT B\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eENB\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n            \u003ctd\u003eCS\u003c\/td\u003e\n            \u003ctd\u003eRX\u003c\/td\u003e\n            \u003ctd\u003e14\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003eSCK\u003c\/td\u003e\n            \u003ctd\u003eTX\u003c\/td\u003e\n            \u003ctd\u003e13\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n            \u003ctd\u003eMISO\u003c\/td\u003e\n            \u003ctd\u003eSCL\u003c\/td\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSCL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Clock\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003eMOSI\u003c\/td\u003e\n            \u003ctd\u003eSDA\u003c\/td\u003e\n            \u003ctd\u003e11\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSDA\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Data\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePower supply\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e3V3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e7\u003c\/td\u003e\n            \u003ctd\u003e3.3V\u003c\/td\u003e\n            \u003ctd\u003e5V\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e5V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003ePower supply\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003e9\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eONBOARD SETTINGS AND INDICATORS\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eLabel\u003c\/th\u003e\n            \u003cth\u003eName\u003c\/th\u003e\n            \u003cth\u003eDefault\u003c\/th\u003e\n            \u003cth\u003eDescription\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePWR\u003c\/td\u003e\n            \u003ctd\u003ePWR\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003ePower LED indicator\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP0, JP2\u003c\/td\u003e\n            \u003ctd\u003eADDR\u003c\/td\u003e\n            \u003ctd\u003eRight\u003c\/td\u003e\n            \u003ctd\u003eI2C slave address selection: left position GND (0), right position VCC (1)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP1\u003c\/td\u003e\n            \u003ctd\u003eADDR\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003eI2C slave address selection: left position GND (0), right position VCC (1)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP3\u003c\/td\u003e\n            \u003ctd\u003eVCCIO\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003eLogic voltage level selection: left position 3.3V, right position 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eNote: please consult the datasheet of the PCA9956B if you need to change the default I2C slave address\u003c\/p\u003e\n\n\u003ch3\u003e \u003c\/h3\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768422228157,"sku":"MIKROE-3299","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-knob-g-click-board-29644301992125.jpg?v=1685106104"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/lg-rotary-magnetic-holder-3.jpg?v=1724338075","url":"https:\/\/thedebugstore.com\/it\/collections\/rotary-encoder-click-boards-catalogue.oembed","provider":"Debug Store","version":"1.0","type":"link"}