{"title":"Miscellaneous Interface Boards","description":"\u003cspan data-mce-fragment=\"1\"\u003eMiscellaneous Interface Boards are essential electronic components providing connectivity and communication between devices or systems. These boards act as intermediaries, enabling seamless data exchange and control in a wide range of applications.\u003c\/span\u003e","products":[{"product_id":"easypull-board-1k-mikroe-575-uk","title":"EasyPULL 1K Board","description":"\u003cp\u003eThe \u003cstrong\u003eEasyPULL Board\u003c\/strong\u003e is an add-on board that comprises of 8 pull-up\/pull-down resistors. The board comes with 1K Ω resistors. A version with 10K Ω resiostors is available. The pull-up or pull-down selection is done via jumpers and the selection is made by simple jumper moving in Up and Down positions. The EasyPULL Board can be used to fix an input pin to a known state if no input is present. It is ideal for protecting the input pin and fixing the input pin at a valid voltage level. It can provide voltage levels to PORT pins, and is very convenient to use when pins are used as inputs, as they need to have predefined logic states. The board features an on-board IDC10 connector and extension pins that enable user to easily connect to external electronic circuits.\u003c\/p\u003e\u003cp\u003eCompatible with EasyLED Board, these board can be used in combination to serve the requirement in various types of applications. In this way, users can tie the device pin to VCC or GND via resistors and have visual indication of output signals through a LED.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768336736445,"sku":"MIKROE-575","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easypull-board-1k-30253410123965.jpg?v=1685220422"},{"product_id":"mikroe-576-easypull-board-10k-uk","title":"EasyPULL 10K Board","description":"\u003cp\u003eThe \u003cstrong\u003eEasyPULL Board\u003c\/strong\u003e is an add-on board that comprises of 8 pull-up\/pull-down resistors. The board comes with 10K Ω resistors. A version with 1K Ω resiostors is available. The pull-up or pull-down selection is done via jumpers and the selection is made by simple jumper moving in Up and Down positions. The EasyPULL Board can be used to fix an input pin to a known state if no input is present. It is ideal for protecting the input pin and fixing the input pin at a valid voltage level. It can provide voltage levels to PORT pins, and is very convenient to use when pins are used as inputs, as they need to have predefined logic states. The board features an on-board IDC10 connector and extension pins that enable user to easily connect to external electronic circuits.\u003c\/p\u003e\u003cp\u003eCompatible with EasyLED Board, these board can be used in combination to serve the requirement in various types of applications. In this way, users can tie the device pin to VCC or GND via resistors and have visual indication of output signals through a LED.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768336769213,"sku":"MIKROE-576","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easypull-board-10k-28872980889789.jpg?v=1685156697"},{"product_id":"easyinput-board-mikroe-1025-uk","title":"EasyInput Board","description":"\u003ch2\u003eElectrical characteristics of tri-state DIP switch\u003c\/h2\u003e\n\n\u003cp\u003eContact Rating: Switching: 25mA, 24VDC; Non-Switching: 100 mA, 50VDC.\u003c\/p\u003e\n\n\u003cp\u003eContact Resistance: Initial: 50 mOhm.\u003c\/p\u003e\n\n\u003cp\u003eMechanical Life: 5000 cycles (Min.) .\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768339882173,"sku":"MIKROE-1025","price":7.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easyinput-board-30257192501437.jpg?v=1685211779"},{"product_id":"mikroe-316-potentiometer-board-uk","title":"Potentiometer Board","description":"\u003cp\u003eAdd potentiometer functionality to the design using the \u003cstrong\u003ePotentiometer Board\u003c\/strong\u003e. Designed for testing analog inputs of a microcontroller on a development system, the Potentiometer Board is equipped with eight 10K potentiometers with related jumpers that allows user to enable\/disable each one individually. It works as an effective and low-cost solution for testing analog inputs on the prototype board. The on-board potentiometers allow for adjusting voltage levels on the host microcontroller.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768345682109,"sku":"MIKROE-316","price":19.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-potentiometer-board-29777635803325.jpg?v=1685130238"},{"product_id":"mikroe-233-mikrodrive-board-uk","title":"mikroDrive Board","description":"\u003ch2\u003eIC\/Module: ULN2803A Darlington Transistor Array\u003c\/h2\u003e\n\n\u003cp\u003eThe ULN2803A is a high-current 8x Darlington transistor array that is capable of powering loads up to 260W in total. The open-collector output transistors have integral clamp diodes that protect them against high voltage of self-induction.With a collector-current rating of 500 mA, each Darlington pair may be connected in parallel for higher current capability. It features a 2.7-kΩ series base resistor for each Darlington pair for operation directly with TTL or 5-V CMOS devices.\u003c\/p\u003e\n\n\u003ch2\u003eJumper Settings\u003c\/h2\u003e\n\n\u003cp\u003eThe mikroDrive Board features a Jumper J1 that allows the user to select the power supply source for the ULN2803As output drivers. When J1 is set in Vcc position, the power comes through the IDC10 connector from the 5V microcontroller host system. When the jumper is set to the Vcc-Ext position, the outputs are powered from an external source up to 50V via screw terminals.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eThe mikroDrive Board serves as an ideal choice for designs where power source conversion between low-level logic circuitry and multiple peripheral power loads. Typical power loads include relay drivers, hammer drivers, lamp drivers, display drivers (LED and gas discharge), line drivers, and logic buffers.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eMiscellaneous\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eCompact and inexpensive, this board is perfect for use when the power source conversion is needed for your embedded project\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003eDarlington arrays ULN2803AN, Screw terminals\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eOutput voltage selection jumper on board\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eGPIO\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003eIDC10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e9-32V DC or 7-23 AC (via external source)\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768346337469,"sku":"MIKROE-233","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-mikrodrive-board-29669753553085.jpg?v=1685085420"},{"product_id":"rfid-reader-board-mikroe-262-uk","title":"RFid Reader Board","description":"\u003ch2\u003eEM4095 CMOS integrated transceiver\u003c\/h2\u003e\u003cp\u003eThe EM4095 (also known as P4095) chip is a 125 KHz-134 KHz, Read\/Write analog front end for RFID basestation. This circuit, which is meant for use in an RFID basestation, carries out antenna driving with carrier frequency while communicating with a microprocessor via simple interface. It does AM modulation of the field for writable transponder and AM demodulation of the antenna signal modulation induced by the transponder.\u003c\/p\u003e\u003ch2\u003eOperating Voltage\u003c\/h2\u003e\u003cp\u003eThe RFid Reader Board operates on 5V power supply only. For connecting it to 3.3V systems, the user must use voltage translators on communication lines.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe RFid Reader Board can be used to read code from 125 kHz RFid tags or identification cards. This makes it ideal for use in car immobilizers, hand held reader and designing low cost readers.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768351973565,"sku":"MIKROE-262","price":29.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-rfid-reader-board-29777638916285.jpg?v=1685128081"},{"product_id":"relay-4-board-mikroe-603-uk","title":"Relay 4 Board","description":"\u003cp\u003eThe \u003cstrong\u003eRelay 4 Board\u003c\/strong\u003e is a cost-effective solution for adding relays to your device. Single ULN2803 driver IC with 8 Darlington arrays drives each of the four available relays. Screw-terminals allow you clean and easy output relay connectivity, and standard IDC10 connector is used for connection with development boards. Using this board with your MCU you can turn on 230V lightbulbs, DC motors, or any other device that draws up to 16A of current and up to 250V. This board allows your device to jump over the boundary of output digital signals into the world of higher voltages and currents.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768354988221,"sku":"MIKROE-603","price":36.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-relay-4-board-29777631150269.jpg?v=1685042396"},{"product_id":"mikroe-3047-ibutton-serial-number-uk","title":"iButton Serial Number","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eIBUTTON™ Serial Number\u003c\/strong\u003e\u003c\/em\u003e, DS1990A is a unique serial number identification iButton™. The iButton is a technology based on the 1-Wire® communication protocol, and a chip packed in a robust stainless steel casing. This button shaped device has two contacts - the lid and the base. These contacts carry the necessary connections down to a sensitive silicone chip, embedded inside the metal button. When the iButton touches the reader probe on the Click board™, it establishes the communication with the host MCU, via the 1-Wire® interface. The communication is almost instant, so it is enough to press the iButton lightly to the probe contacts.\u003c\/p\u003e\n\n\u003cp\u003eDue to its robustness, the \u003cstrong\u003eIBUTTON™ Serial Number\u003c\/strong\u003e can withstand much more stress than similar devices used to carry an information: tags, cards, and other such devices are prone to damage, while a chip packed inside a 16mm thick stainless steel can be highly resilient. It can be mounted on any object, such as keychains, pallets, bags, and similar. It can be used as an electronic registration number for automatic identification applications, and similar security type applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow Does The IBUTTON™ Serial Number Work?\u003c\/h3\u003e\n\n\u003cp\u003eDS1990A is a serial number iButton™ device, from Analog Devices. This device is programmed by the guaranteed unique 64-bit registration number that allows for absolute traceability. The thick stainless steel casing of the iButton ensures resistance against dirt, dust, moisture, shock and other environmental hazards. The button shape helps to establish a proper alignment with the probe, such as the one found on the iButton click and ensures reliable communication with a speed of 16.3kbps.\u003cbr\u003e\n\u003cimg alt=\"MikroElektronika Accessories Components iButton™ Serial Number\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/www.mikroe.com\/img\/cms\/ibutton-inside-image.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe device is capable of powering itself up through the data line by employing the so-called parasite power supply. Parasite PSU contains an internal capacitor, which provides enough current for the proper operation, once it has been charged by the data line. To allow proper functioning of the parasitic PSU, the idle state of the data line is HIGH, while the data line of the DS1990A is in an open-drain configuration, pulling the data line to a LOW logic level when asserted.\u003c\/p\u003e\n\n\u003cp\u003eThe factory programmed serial number is read through the standard 1-Wire® communication protocol. The first 8 bytes represent a 1-Wire family code, while the following 48 bits contain the unique serial number. The last 8 bits contain the CRC of the previous data, ensuring data integrity. The host MCU initiates the communication by sending a reset signal, responded by the presence signal from the attached devices. More information about the 1-Wire signaling can be found in the DS1990A datasheet.\u003c\/p\u003e\n\n\u003cp\u003eMikroElektronika offers a library which contains functions for reading the content of this iButton via the iButton click. This library is compatible with the MikroElektronika line of compilers and supported MCUs. The serial number information stored on this iButton can also be extracted by any iButton reader, compatible with the Maxim Integrated iButton devices.\u003c\/p\u003e\n\n\u003ch3\u003eIBUTTON™ SERIAL NUMBER CHARACTERISTICS\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eIO Voltage Range to GND: -0.5V to +6.0V\u003c\/li\u003e\n    \u003cli\u003eIO Sink Current: 20mA\u003c\/li\u003e\n    \u003cli\u003eHeight: 5,89mm\u003c\/li\u003e\n    \u003cli\u003eDiameter: 19,90mm\u003c\/li\u003e\n    \u003cli\u003eThe package\/Case: F5 MicroCan\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003e1-Wire\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eAn ideal solution for a robust and resilient identification that can be attached to many different objects that require tracking: pallets, bags, keychains, and similar. It can also be used for the workshop tools tracking systems\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eA unique serial number that guarantees an absolute traceability, a stainless steel casing protects it against environmental hazards, fast and reliable 1-Wire® communication up to 16.3kB\/s, easy mounting on any object\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003e1-Wire\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eExpandability\u003c\/td\u003e\n            \u003ctd\u003eiButton click\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768423735485,"sku":"MIKROE-3047","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-component-ibutton-serial-number-30249316548797.jpg?v=1685037902"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/lg-rfid-reader-board-1.jpg?v=1724338182","url":"https:\/\/thedebugstore.com\/it\/collections\/other-interface-boards-catalogue.oembed","provider":"Debug Store","version":"1.0","type":"link"}