{"title":"Hanwei Electronics Gas Sensor Support: Debug Store's Development Boards and Tools","description":"\u003cp\u003e\u003cspan\u003eHanwei Electronics is China's largest gas sensor manufacturer, specializing in various sensor types for industrial, commercial, and personal safety applications.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"hydrogen-click-board-mikroe-1629-uk","title":"Hydrogen Click Board™","description":"\n\n\u003ch2\u003eMQ-8 Sensor\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eHydrogen Click Board™\u003c\/strong\u003e\u003c\/em\u003e is based on the MQ-8 sensor features a gas sensing layer constructed of tin dioxide which is an inorganic compound with the formula SnO2. Tin dioxide is known to have lower conductivity in clean air. As the percentage of hydrogen increases in the environment, the conductivity rises too.\u003c\/p\u003e\n\n\u003ch2\u003eMode of Communication\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eHydrogen Click Board™\u003c\/strong\u003e uses AN (OUT) mikroBUS line for communicating with the target board. This accessory board is designed to use a 5V power supply only.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eHydrogen Click Board™\u003c\/strong\u003e finds great application in designing gas leakage equipment. Being suitable for detecting hydrogen concentration, Hydrogen Click Board™ can be used in the environments like hydrochloric acid production, atomic hydrogen welding, those using hydrogen as a rotor coolant in electrical generators, and also metallic ore reduction.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768345288893,"sku":"MIKROE-1629","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-hydrogen-click-board-30275169157309.jpg?v=1685195930"},{"product_id":"methane-click-board-mikroe-1628-uk","title":"Methane Click Board™","description":"\n\n\u003ch2\u003eMethane (CH4) sensor: MQ-4\u003c\/h2\u003e\n\n\u003cp\u003eMQ-4 methane sensor has a fast response time and output is an analog resistance. The sensor requires to be preheated for accurate calibration. It takes more than 24 hours for the sensor to reach the right temperature after it has been powered on.\u003c\/p\u003e\n\n\u003ch2\u003eVoltage Requirements\u003c\/h2\u003e\n\n\u003cp\u003eMethane Click Board™ has been designed to use a 5V power supply only. This accessory board uses AN (OUT) mikroBUS line for communicating with the target board.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768345321661,"sku":"MIKROE-1628","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-methane-click-board-28891616673981.jpg?v=1685112775"},{"product_id":"lpg-click-board-mikroe-1587-uk","title":"LPG Click Board™","description":"\u003ch2\u003eLPG sensor: MQ-5\u003c\/h2\u003e\n\n\u003cp\u003eMQ-5 liquefied petroleum gas sensor has a fast response time and output is an analog resistance. It is also highly sensitive to natural gas and town gas. The sensor requires to be preheated for accurate calibration, and it takes more than 24 hours for the sensor to reach the right temperature after being powered on. As the concentration of the target air changes, the resistance of the sensor component also gets changed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n.\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan class=\"fr-video fr-fvc fr-dvi fr-draggable\"\u003e\u003ciframe allowfullscreen=\"\" class=\"fr-draggable\" frameborder=\"0\" src=\"\/\/www.youtube.com\/embed\/t5sgZ-dP9ao\" style=\"width:500px;height:281px;\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003ch2\u003ePower Requirements\u003c\/h2\u003e\n\n\u003cp\u003eLPG Click Board™ needs a 5V power supply only. This accessory board uses AN (OUT) mikroBUS line for communicating with the target board.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768345354429,"sku":"MIKROE-1587","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-lpg-click-board-30244430708925.jpg?v=1685016470"},{"product_id":"alcohol-click-board-mikroe-1586-uk","title":"Alcohol Click Board™","description":"\u003cp\u003eThe\u003cstrong\u003e \u003cem\u003eAlcohol Click Board™\u003c\/em\u003e\u003c\/strong\u003e has a high sensitivity to alcohol and it can be used to detect alcohol in concentrations from 0.04 to 4mg\/l.\u003c\/p\u003e\n\n\u003cp\u003eAlcohol click carries an MQ-3 Semiconductor sensor for alcohol. The click is designed to run on a 5V power supply only. It communicates with the target microcontroller through the AN pin on the mikroBUS™ line. \u003c\/p\u003e\n\n\u003ch3\u003eMQ-3 Sensor Features\u003c\/h3\u003e\n\n\u003cp\u003eThe gas sensing layer on the sensor unit is made of Tin dioxide (SnO2), an inorganic compound that has lower conductivity in clean air. The conductivity increases as the levels of alcohol gas rise.\u003c\/p\u003e\n\n\u003ch3\u003eSensor  Calibration\u003c\/h3\u003e\n\n\u003cp\u003eTo calibrate the sensor for the environment you'll be using it in, the \u003cstrong\u003eAlcohol Click Board™\u003c\/strong\u003e has a small potentiometer that allows you to adjust the Load Resistance of the sensor circuit.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eMQ-3 sensor\n    \u003cul\u003e\n        \u003cli\u003eConcentration: 0.04-4mg\/l alcohol\u003c\/li\u003e\n        \u003cli\u003eSensitivity: Rs(in air)\/Rs(0.4mg\/LAlcohol)≥5\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003eInterface: Analog\u003c\/li\u003e\n    \u003cli\u003e5V power supply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768345419965,"sku":"MIKROE-1586","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-alcohol-click-board-30267418149053.jpg?v=1684982461"},{"product_id":"mikroe-1630-air-quality-click-board-uk","title":"Air Quality Click Board™","description":"\u003cp\u003eThe\u003cem\u003e\u003cstrong\u003e Air Quality Click Board™\u003c\/strong\u003e\u003c\/em\u003e is a simple solution for adding a high sensitivity sensor for detecting a variety of gases that impact air quality in homes and offices. It carries an MQ-135 sensor. The click is designed to run on a 5V power supply. It communicates with the target microcontroller over the AN pin on the mikroBUS™ line.\u003c\/p\u003e\n\n\u003ch3\u003eDetecting Gases\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eAir Quality Click Board™\u003c\/strong\u003e is suitable for detecting ammonia (NH3), nitrogen oxides (NOx) benzene, smoke, CO2 and other harmful or poisonous gases that impact air quality. The MQ-135 sensor unit has a sensor layer made of tin dioxide (SnO2), an inorganic compound that has lower conductivity in clean air than when polluting gases are present.\u003c\/p\u003e\n\n\u003ch3\u003eCalibration Potentiometer\u003c\/h3\u003e\n\n\u003cp\u003eTo calibrate the \u003cstrong\u003eAir Quality Click Board™\u003c\/strong\u003e for optimum performance, use the onboard potentiometer to adjust the load resistance on the sensor circuit.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eMQ-135 sensor\n    \u003cul\u003e\n        \u003cli\u003eSnO2 gas sensing layer\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003eInterface: AN\u003c\/li\u003e\n    \u003cli\u003e5V power supply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768345944253,"sku":"MIKROE-1630","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-air-quality-click-board-30267500069053.jpg?v=1685207996"},{"product_id":"mikroe-1626-co-click-board-uk","title":"CO Click Board™","description":"\u003ch2\u003eCarbon Monoxide (CO) Sensor: MQ-7\u003c\/h2\u003e\n\n\u003cp\u003eThe MQ-7 sensor has high sensitivity to carbon monoxide. The gas sensing layer on the sensor unit is made of Tin dioxide (SnO2), which has lower conductivity in clean air. The conductivity increases as the levels of Carbon monoxide rise. The detection range of the sensor is 20ppm-2000ppm of CO.\u003c\/p\u003e\n\n\u003cp\u003eTo calibrate the sensor for the environment youll be using it in, CO Click Board™ has a small potentiometer that allows you to adjust the Load Resistance of the sensor circuit. For precise calibration, the sensor needs to preheat (once powered up, it takes 48h to reach the right temperature).\u003c\/p\u003e\n\n\u003ch2\u003eHighly Useful\u003c\/h2\u003e\n\n\u003cp\u003eCarbon monoxide gas sensors are used to detect the presence of that gas and prevent carbon monoxide poisoning. Since carbon monoxide has no smell or colour, humans cannot detect it. In high concentrations, it can be lethal.\u003c\/p\u003e\n\n\u003cp\u003eCO Click Board™ finds its application in designing of gas leakage equipment. Being suitable for detecting carbon monoxide concentration, CO Click Board™ can be used in the devices like portable gas detectors, domestic gas leakage detectors and industrial combustible gas detectors.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768345977021,"sku":"MIKROE-1626","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-co-click-board-30265146409149.jpg?v=1684990373"},{"product_id":"mikroe-2767-ozone-2-click-board-uk","title":"Ozone 2 Click Board™","description":"\u003cp\u003eFeaturing an accurate 22-bit ADC and a high-quality O\u003csub\u003e3\u003c\/sub\u003e sensor protected by a stainless mesh, the \u003cstrong\u003eOzone 2 Click Board™\u003c\/strong\u003e can be used in a range of applications used to measure or detect O\u003csub\u003e3\u003c\/sub\u003e gas concentrations in the atmosphere, for small testing equipment development, various warning systems for air quality \/ ozone pollution, and other similar applications that are used for the ozone concentration detection and monitoring.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does The Ozone 2 Click Board™ Work?\u003c\/h2\u003e\n\n\u003cp\u003eThe main sensor component of the \u003cstrong\u003eOzone 2 Click Board™\u003c\/strong\u003e is the MQ131 ozone (O\u003csub\u003e3\u003c\/sub\u003e) gas sensor from Winsen Sensor, which uses the SnO2 (tin-oxide) alloy, which decreases its resistance while exposed to the O\u003csub\u003e3\u003c\/sub\u003e gas. The greater the O\u003csub\u003e3\u003c\/sub\u003e concentration is, the more conductive this material becomes. This can be utilized to obtain the O\u003csub\u003e3\u003c\/sub\u003e concentration readings. The sensor itself contains a small heating element, connected to 5V power supply. It needs to be preheated for 48h before it can perform as specified. The sensitivity of the sensor is given as the ratio between the resistance in air and the resistance in the O\u003csub\u003e3\u003c\/sub\u003e gas concentration of 50ppm, which is ≥ 3 (R\u003csub\u003eO\u003c\/sub\u003e\/R\u003csub\u003eS\u003c\/sub\u003e ≥ 3). The sensor is protected against particles and mechanical damage by a stainless mesh, however, exposing to excessive moisture and corrosive gases can damage the inner structure.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Ozone 2 Click inneri\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/www.mikroe.com\/img\/images\/Ozone_2_Click_inneri2.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe measuring circuit consists of the MQ131 sensor, a power source and a load resistor (RL) between the output pin and GND. The sensor with its internal resistance forms a voltage divider with the load resistor. The RL is designed as a variable resistor, allowing the output voltage to be trimmed to the desired value. The calibration should be performed in controlled conditions, as the resistance of the sensor is affected by both the ambient temperature and humidity. The sensor can be used to measure relative O\u003csub\u003e3\u003c\/sub\u003e concentration change without an accurate calibrating, which is useful for building applications that can be used as warning systems. The middle tap of the sensor-RL voltage divider is routed to an SMD jumper labelled as ADC SEL. This jumper can be used to redirect the measuring voltage either to the ADC for sampling or to the AN pin, so it can be used in an external circuitry (external ADC or some other form of measurement signal conditioning).\u003c\/p\u003e\n\n\u003cp\u003eThe MCP3551, a 22bit sigma-delta ADC from Microchip is used to sample the output of the sensor when selected by the ADC SEL jumper. This ADC converts the input voltage with a very high resolution of 22 bits and low noise, to a digital data, which can be obtained via the SPI interface of the \u003cstrong\u003eOzone 2 Click Board™\u003c\/strong\u003e. This ADC uses the reference voltage which is the same as the power supply voltage, and in this case, it is powered by 5V from the mikroBUS™ power rail. The reference voltage is used to calculate the value of the input voltage based on data received from the SPI bus, by using the following formula:\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eV\u003csub\u003eSENS\u003c\/sub\u003e = DATA x V\u003csub\u003eREF\u003c\/sub\u003e \/ FS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eV\u003csub\u003eREF\u003c\/sub\u003e is the same as the power supply for this circuit, which means V\u003csub\u003eREF\u003c\/sub\u003e = 5V, and the highest number written with 22 bits (FS) is 4,194,303. DATA is the 22-bit conversion value.\u003c\/p\u003e\n\n\u003cp\u003eAs already mentioned, the ADC uses a 5V power supply. Therefore, this board needs a level conversion circuitry in order to be interfaced with 3.3V MCUs. This Click board™ uses the TXB0106 IC, a 6-bit bidirectional level shifting IC from Texas Instruments, which is used to shift communication logic voltage levels from 5V to 3.3V. The voltage shift depends on the reference voltage on the VCCA pin, which can be selected with the SMD jumper, labelled as the VCCIO SEL.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eGas,Ozone\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eThe \u003cstrong\u003eOzone 2 Click Board™\u003c\/strong\u003e can be used in different Ozone concentration detectors for air quality control, or for gas leak detection.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003eMQ131 sensor, MCP3551\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eOzone concentration 10-1000 ppm, communicates over the AN pin or ADC MCP3551, sensitivity Rs(in air)\/Rs(in 50 ppm O3)≥3, onboard potentiometer for calibration\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eAnalog,SPI\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003emikroBUS\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eClick board size\u003c\/td\u003e\n            \u003ctd\u003eL (57.15 x 25.4 mm)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e3.3V or 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePinout diagram\u003c\/h3\u003e\n\n\u003cp\u003eThis table shows how the pinout of the \u003cstrong\u003eOzone 2 Click Board™\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003ecorresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).\u003c\/p\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth colspan=\"4\"\u003e\u003cimg alt=\"Mikrobus logo.png\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/mikrobus\/mikroBUS-logo-black.png\"\u003e\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eAnalog pin\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eAN\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003eAN\u003c\/td\u003e\n            \u003ctd\u003ePWM\u003c\/td\u003e\n            \u003ctd\u003e16\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n            \u003ctd\u003eRST\u003c\/td\u003e\n            \u003ctd\u003eINT\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eSPI Chip Select\u003c\/td\u003e\n            \u003ctd\u003e\u003cb\u003eCS\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n            \u003ctd\u003eCS\u003c\/td\u003e\n            \u003ctd\u003eTX\u003c\/td\u003e\n            \u003ctd\u003e14\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eSPI clock\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSCK\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003eSCK\u003c\/td\u003e\n            \u003ctd\u003eRX\u003c\/td\u003e\n            \u003ctd\u003e13\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eSPI Data OUT\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSDO\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n            \u003ctd\u003eMISO\u003c\/td\u003e\n            \u003ctd\u003eSCL\u003c\/td\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003eMOSI\u003c\/td\u003e\n            \u003ctd\u003eSDA\u003c\/td\u003e\n            \u003ctd\u003e11\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePower supply\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e+3.3V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e7\u003c\/td\u003e\n            \u003ctd\u003e3.3V\u003c\/td\u003e\n            \u003ctd\u003e5V\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e+5V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003ePower supply\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003e9\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOnboard Jumpers and Settings\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eLabel\u003c\/th\u003e\n            \u003cth\u003eName\u003c\/th\u003e\n            \u003cth\u003eDefault\u003c\/th\u003e\n            \u003cth\u003eDescription\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePWR\u003c\/td\u003e\n            \u003ctd\u003ePWR\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003ePower LED indicator\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP1\u003c\/td\u003e\n            \u003ctd\u003eVCCIO SEL.\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003eLogic voltage level selection: left position 3V3, right position 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP2\u003c\/td\u003e\n            \u003ctd\u003eADC SEL.\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003eAnalog signal routing selection: left position - signal is routed to the ADC, right position - signal is routed to the AN pin of mikroBUS™\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eVR1\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003ePotentiometer for adjusting the sensor sensitivity\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e \u003c\/h3\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768409317565,"sku":"MIKROE-2767","price":83.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-ozone-2-click-board-30240174571709.jpg?v=1685193062"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/logo-hanwei-electronics.jpg?v=1725721740","url":"https:\/\/thedebugstore.com\/it\/collections\/hanwei-electronics-device-support.oembed","provider":"Debug Store","version":"1.0","type":"link"}