{"title":"Memory Emulators","description":"\u003cp\u003e\u003cspan\u003eThe Debug Store offers a range of high-quality emulators for electronic design engineers. These tools simulate various hardware components, allowing developers to test and debug their designs efficiently. From flash memory to device emulators, the products enable seamless firmware updates, unlimited reprogramming, and accurate debugging across multiple platforms, enhancing the overall development process for embedded systems.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"em100pro-serial-flash-emulator-dediprog-uk","title":"Dediprog EM100Pro SPI Flash Emulator","description":"\u003cp\u003eThe Dediprog EM100Pro has replaced the EM100. This advanced tool has been designed in close cooperation with the Serial Flash suppliers to emulate the behaviours of all the market Serial Flash and also the next generation Serial Flash. HardwareThe EM100Pro has two 2.54mm pitch males connectors of: * 2x2 for the Reset and Trig signals * 2*10 for the Emulation signals The EM100Pro is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the EM100Pro 2x10 header pin out. DediProg also provides the EM100pro ISP Cable which is used to connect the EM100Pro programmer to the 2X5 2.54mm ISP Pin Header on board.\u003c\/p\u003e\n\n\u003ch3\u003eMemory Emulation: \u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEmulate all the market Serial Flash (suppliers, families, densities and future road map serial Flash). Memory part number to be selected by user on the software list.\u003c\/li\u003e\n    \u003cli\u003eDensities: from 512Kb to 512Mb SPI Flash\u003c\/li\u003e\n    \u003cli\u003eFrequency: from DC to 75MHz (chipset and application dependant)\u003c\/li\u003e\n    \u003cli\u003eI\/O: Unidirectional SPI input and output\u003c\/li\u003e\n    \u003cli\u003eTransparency: Small add-in capacitance to the application SPI bus\u003c\/li\u003e\n    \u003cli\u003ePins option: Support Wp, Hold and Reset features (when supported by the target Serial flash)\u003c\/li\u003e\n    \u003cli\u003eMemory Power: 3.3V, 3V, 2.5V, 1.8V 9 Vcc monitoring for Power On Reset and I\/O level auto set.\u003c\/li\u003e\n    \u003cli\u003eInstructions: Support standard market Serial flash instructions and features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e**To view the EM100 Pro full specification, look under downloads.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":37768306098365,"sku":"EM100PRO","price":375.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/dediprog-technology-co-ltd-emulator-dediprog-em100pro-spi-flash-emulator-23150685847741.jpg?v=1685095127"},{"product_id":"wice-me-leaptronix-uk","title":"Leaptronix WICE-ME Flash Emulator","description":"\u003cp\u003eSPI Module and FWH Modules are available as options.\u003c\/p\u003e","brand":"Leaptronix","offers":[{"title":"Default Title","offer_id":37768309407933,"sku":"WICE-ME","price":68.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/leap-electronic-co-ltd-emulator-wice-me-flash-emulator-29038517682365.jpg?v=1685132395"},{"product_id":"dediprog-em100pro-g2-spi-nor-flash-emulator-uk","title":"Dediprog EM100Pro-G2 SPI NOR Flash Emulator","description":"\u003ch2\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n    \u003cli\u003eMinutes become seconds for SPI NOR Flash code update (3 seconds to update 2Gbit code)\u003c\/li\u003e\n    \u003cli\u003eSave up to 1 hour every day for your development and reduce your time to market\u003c\/li\u003e\n    \u003cli\u003eDebug efficiently your application through the available SPI bus with our SPI Trace, SPI Trigger, SPI Hyper Terminal for debug messages\u003c\/li\u003e\n    \u003cli\u003eDevelop your own application debugger via our bidirectional SPI Hyper terminal and control application from your host PC\u003c\/li\u003e\n    \u003cli\u003eEM100Pro-G2 can connect with Intel motherboard by specific adaptor ISP-ADP-Intel-C (Option).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePerformance (Erase+Program+Verify)\u003c\/h2\u003e\n\n\u003ctable align=\"center\" border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eDensity \u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eProgrammer\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eEM100Pro-G2 Emulator\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e8Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e9s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e16Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e13s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e32Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e16s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e64Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e38s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e128Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e75s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e256Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e115s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e512Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e200s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e1Gb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eN\/A\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e2Gb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eN\/A\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003e\n\u003cbr\u003e\n\u003cstrong\u003eHardware\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp\u003eThe EM100Pro-G2 has two 2.54mm pitch males connectors of:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e2x2 for the Reset and Trig signals\u003c\/li\u003e\n    \u003cli\u003e2x10 for the Emulation signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEM100Pro-G2 is designed with ISP header, through different cables\/adaptors, it can connect to the PCB board directly. Please refer to Table 1 for EM100Pro-G2 2x10 header pin out.\u003c\/p\u003e\n\n\u003cp\u003eDediProg also provides the EM100Pro-G2 ISP Cable which is used to connect the EM100Pro-G2 programmer to the 2X5 2.54mm ISP Pin Header on board, please refer to Table 2 for the EM100Pro-G2 ISP Cable 2x5 pin out.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eEM100Pro-G2 ISP Header Pin Out\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003ctable align=\"center\" border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eNC\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCS2\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e2\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCS1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eVcc\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e4\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eMISO\/DQ1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eHold\/DQ3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e6\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e7\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eWp\/DQ2\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCLK\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e8\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e9\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eMOSI\/DQ0\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e10\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e11\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e3.3V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eNC\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e12\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e13\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCTRL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eNC\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e14\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e15\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCTRL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e3.3V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e16\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e17\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCTRL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCTRL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e18\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e19\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eNC\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e20\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ctable align=\"center\" border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eReset\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e2\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eTrig\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e4\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eISP Cable Connector Pin Out (2x5)\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003ctable align=\"center\" border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eNC\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCS2\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e2\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCS1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eVcc\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e4\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eMISO\/DQ1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eHold\/DQ3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e6\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e7\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eWp\/DQ2\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCLK\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e8\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e9\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eMOSI\/DQ0\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e10\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eEM100Pro-G2 increases productivity by downloading firmware code or data into the emulator in a few seconds for density as large as 2Gb. In addition, it provides \"SPI BUS Analyzer\" feature by collecting all the SPI command and data on the SPI bus in order to help the debugging process.\u003cbr\u003e\nIt will speed up your firmware development and testing by eliminating the need to remove-erase-program and re-install SPI flash each time you test a code change.\u003cbr\u003e\nIf you want to stop the \"program\/insert\/boot\/remove\/erase\" cycle, then this is the tool for you.\u003c\/p\u003e","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":37768475541693,"sku":"EM100Pro-G2","price":695.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/dediprog-technology-co-ltd-emulator-dediprog-em100pro-g2-spi-nor-flash-emulator-29038557855933.jpg?v=1684997403"},{"product_id":"spi-adapter-pod-for-wice-me-flash-emulator-uk","title":"Leap SPI Adapter Pod for WICE-ME Flash Emulator","description":"","brand":"Leaptronix","offers":[{"title":"Default Title","offer_id":39743424069821,"sku":"WICE-ME-SPI","price":38.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/leap-electronic-co-ltd-programmer-adapter-spi-adapter-pod-for-wice-me-flash-emulator-28797888528573.jpg?v=1685135275"},{"product_id":"dediprog-em100pro-g3-spi-nor-flash-emulator-uk","title":"Dediprog EM100Pro-G3 SPI NOR Flash Emulator","description":"\u003ch2\u003eSPI NOR Flash Emulator for Firmware Development\u003c\/h2\u003e\n\n\u003cp\u003eThe EM100Pro-G3 is a device emulator, not a programmer. It connects in place of the SPI NOR flash and presents itself to the target as that flash, with the image held in the emulator's own DRAM. A code change is a download to the emulator, not an erase, program and verify cycle on a real chip.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eFast image loading.\u003c\/strong\u003e Dediprog quotes 3 s to load a 256 Mb image, 5 s for 512 Mb, 10 s for 1 Gb and 20 s for 2 Gb.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSPI bus analyser.\u003c\/strong\u003e Records the SPI commands and data on the bus in an internal trace buffer, so you can see what the target reads at boot. At high bus throughput the buffer can overflow, so very busy traces may have gaps.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSPI HyperTerminal.\u003c\/strong\u003e A two-way channel over the SPI bus for debug messages between the target and the host PC.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVoltage and bus support.\u003c\/strong\u003e 1.8 V and 3.3 V devices; single, dual and quad I\/O; SPI clock up to 50 MHz; device densities from 512 Kbit to 4 Gbit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDevice selection in software.\u003c\/strong\u003e Pick the SPI NOR part to emulate from the Dediprog software list, so code can be tried against different flash parts without changing hardware.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConnections.\u003c\/strong\u003e A 2x10 header carries the emulation signals and a 2x2 connector carries reset and trigger. Cables and adaptors connect it to the board; an Intel motherboard adaptor is available as an option.\u003c\/p\u003e\n\n\u003ch2\u003ePerformance Comparison\u003c\/h2\u003e\n\n\u003ctable\u003e\n\t\u003cthead\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003cth\u003eDensity\u003c\/th\u003e\n\t\t\t\u003cth\u003eProgrammer\u003c\/th\u003e\n\t\t\t\u003cth\u003eEM100Pro-G2\u003c\/th\u003e\n\t\t\t\u003cth\u003eEM100Pro-G3\u003c\/th\u003e\n\t\t\u003c\/tr\u003e\n\t\u003c\/thead\u003e\n\t\u003ctbody\u003e\n\t\t\u003ctr\u003e\n\u003ctd\u003e256 Mb\u003c\/td\u003e\n\u003ctd\u003e115 s\u003c\/td\u003e\n\u003ctd\u003e5 s\u003c\/td\u003e\n\u003ctd\u003e3 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\u003ctd\u003e512 Mb\u003c\/td\u003e\n\u003ctd\u003e200 s\u003c\/td\u003e\n\u003ctd\u003e10 s\u003c\/td\u003e\n\u003ctd\u003e5 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\u003ctd\u003e1 Gb\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003e20 s\u003c\/td\u003e\n\u003ctd\u003e10 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\u003ctd\u003e2 Gb\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003e40 s\u003c\/td\u003e\n\u003ctd\u003e20 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eDediprog's figures. The programmer times are erase, program and verify on a real device with a conventional programmer; Dediprog does not name the model.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eFirmware and BIOS development where the image changes many times a day, boot debugging where you need to see what the target reads from flash, and trying code against several SPI NOR parts without changing hardware. Production boards still need their flash programmed with a programmer.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\n\u003cp\u003eDediprog EM100Pro-G3 software and USB drivers for Windows.\u003c\/p\u003e\n\n\u003cp class=\"ds-fact-check\" style=\"color:#1F5FA8\"\u003e\u003csmall\u003e\u003cem\u003eChecked against the \u003ca style=\"color:#1F5FA8\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/data-sheet-dediprog-EM100Pro-G3-2023V1.0.pdf\" target=\"_blank\"\u003eDediprog EM100Pro-G3 datasheet (2023 V1.0)\u003c\/a\u003e, the \u003ca style=\"color:#1F5FA8\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/user-manual-dediprog-em100pro-2.4.pdf\" target=\"_blank\"\u003eEM100Pro series user manual (V2.4)\u003c\/a\u003e and \u003ca style=\"color:#1F5FA8\" href=\"https:\/\/www.dediprog.com\/product\/EM100Pro-G3\" target=\"_blank\"\u003eDediprog's EM100Pro-G3 product page\u003c\/a\u003e on 8 Oct 2026.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":44378926743775,"sku":"EM100Pro-G3","price":785.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/dediprog-technology-co-ltd-em100pro-g3-dediprog-em100pro-g3-spi-nor-flash-emulator-debug-store-uk-40508893528287.jpg?v=1695736914"},{"product_id":"dediprog-em100-spi-flash-emulator","title":"Dediprog EM100 SPI Flash Emulator","description":"\u003cp\u003eThe Dediprog EM100Pro has replaced the EM100. This advanced tool has been designed in close cooperation with the Serial Flash suppliers to emulate the behaviours of all the market Serial Flash and also the next generation Serial Flash. HardwareThe EM100Pro has two 2.54mm pitch males connectors of: * 2x2 for the Reset and Trig signals * 2*10 for the Emulation signals The EM100Pro is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the EM100Pro 2x10 header pin out. DediProg also provides the EM100pro ISP Cable which is used to connect the EM100Pro programmer to the 2X5 2.54mm ISP Pin Header on board.\u003c\/p\u003e\n\n\u003ch3\u003eMemory Emulation: \u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEmulate all the market Serial Flash (suppliers, families, densities and future road map serial Flash). Memory part number to be selected by user on the software list.\u003c\/li\u003e\n    \u003cli\u003eDensities: from 512Kb to 512Mb SPI Flash\u003c\/li\u003e\n    \u003cli\u003eFrequency: from DC to 75MHz (chipset and application dependant)\u003c\/li\u003e\n    \u003cli\u003eI\/O: Unidirectional SPI input and output\u003c\/li\u003e\n    \u003cli\u003eTransparency: Small add-in capacitance to the application SPI bus\u003c\/li\u003e\n    \u003cli\u003ePins option: Support Wp, Hold and Reset features (when supported by the target Serial flash)\u003c\/li\u003e\n    \u003cli\u003eMemory Power: 3.3V, 3V, 2.5V, 1.8V 9 Vcc monitoring for Power On Reset and I\/O level auto set.\u003c\/li\u003e\n    \u003cli\u003eInstructions: Support standard market Serial flash instructions and features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e**To view the EM100 Pro full specification, look under downloads.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":53433913573751,"sku":"EM100","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/dediprog-technology-co-ltd-emulator-dediprog-em100pro-spi-flash-emulator-23150685847741.jpg?v=1685095127"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/lg-dediprog-EM100Pro-G2_1_8891cc99-7c7e-4868-8b30-a9f5bd3958b0.jpg?v=1724338112","url":"https:\/\/thedebugstore.com\/it\/collections\/emulators.oembed","provider":"Debug Store","version":"1.0","type":"link"}