{"product_id":"total-phase-promira-i2c-active-analysis-application","title":"Total Phase PROMIRA I2C Analysis Application","description":"\u003cp\u003eThe Promira I2C Analysis Application (TP601110) turns a Total Phase Promira Serial Platform into a non-intrusive I2C protocol analyser that monitors live traffic at up to 5 MHz at 3.3 V. Captured data streams directly to the PC, so capture length is set by disk space rather than an on-board buffer, and Data Center decodes it in real time with error reporting and bit-level timing. It is the tool for debugging what two real I2C devices actually say to each other.\u003c\/p\u003e\n\n\u003ch2\u003eNon-Intrusive I2C Capture to 5 MHz\u003c\/h2\u003e\n\u003cp\u003eThe analyser listens to SDA and SCL without driving them, so the bus behaves exactly as it does without the tool attached. Total Phase rates capture at up to 5 MHz at 3.3 V, above the 4 MHz limit of the \u003ca href=\"\/fr\/products\/total-phase-tp320121-beagle-i2c-spi-analyser-uk\"\u003eBeagle I2C\/SPI\u003c\/a\u003e. What you capture is what the shipping product does, including the NAK, the clock stretch or the stuck bus that only happens with the real parts.\u003c\/p\u003e\n\n\u003ch2\u003eReal-Time Decode With Error Codes and Bit-Level Timing\u003c\/h2\u003e\n\u003cp\u003eData Center shows addresses, data, ACK and NAK as they occur, with error codes on malformed transactions. Bit-level timing shows when each edge occurred, so clock stretching and timing faults can be compared with the device datasheet instead of guessed at.\u003c\/p\u003e\n\n\u003ch2\u003eNearly Limitless Streamed Capture\u003c\/h2\u003e\n\u003cp\u003eBecause data is streamed straight to the PC, a capture can run for hours to catch a fault that appears once a day. Over Gigabit Ethernet the Promira can sit next to a unit in an environmental chamber or a soak-test rack while you watch from your desk.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eCaptures are viewed in Total Phase Data Center, which decodes the bus in real time and saves sessions for later review. The analysis applications need Promira firmware v2.00 or later, which is installed through the Promira admin interface.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eI2C bus monitor (Analysis), non-intrusive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum capture rate\u003c\/th\u003e\n\u003ctd\u003e5 MHz at 3.3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapture\u003c\/th\u003e\n\u003ctd\u003eStreamed directly to the PC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDecode\u003c\/th\u003e\n\u003ctd\u003eReal time, with error codes and bit-level timing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eData Center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003ePromira firmware v2.00 or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost platform\u003c\/th\u003e\n\u003ctd\u003ePromira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eTP601110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a software licence only. It runs on the \u003ca href=\"\/fr\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform\u003c\/a\u003e (\u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk\"\u003e£1,040\u003c\/span\u003e ex VAT), which is sold separately and must be in place before the licence can be installed.\u003c\/li\u003e\n\u003cli\u003eMonitor only. It does not act as master or slave; for that add \u003ca href=\"\/fr\/products\/tp600110-i2c-active-level-1-application-total-phase-uk\"\u003eI2C Active Level 1\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eTotal Phase rates the 5 MHz figure at 3.3 V. If your bus runs at 1.8 V or lower, \u003ca href=\"\/fr\/pages\/contact-us\"\u003econtact us\u003c\/a\u003e before ordering.\u003c\/li\u003e\n\u003cli\u003eWe ask for your Promira serial number at checkout, as printed on the label of the unit, because we need it to process the licence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhich I2C and SPI Analyser Should You Choose?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eBeagle I2C\/SPI Analyser\u003c\/th\u003e\n\u003cth\u003ePromira I2C Analysis\u003c\/th\u003e\n\u003cth\u003ePromira SPI Analysis Level 1\u003c\/th\u003e\n\u003cth\u003ePromira SPI Analysis Level 2\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI2C capture\u003c\/th\u003e\n\u003ctd\u003eTo 4 MHz\u003c\/td\u003e\n\u003ctd\u003eTo 5 MHz at 3.3 V\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI capture\u003c\/th\u003e\n\u003ctd\u003eTo 24 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eTo 24 MHz at 3.3 V, 1 chip select\u003c\/td\u003e\n\u003ctd\u003eTo 40 MHz, 1 chip select\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost connection\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"total-phase-tp320121-beagle-i2c-spi-analyser-uk\"\u003e£400\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan data-ds-price=\"total-phase-promira-i2c-active-analysis-application\"\u003e£120\u003c\/span\u003e plus platform\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan data-ds-price=\"total-phase-promira-spi-active-level-1-analysis-application\"\u003e£120\u003c\/span\u003e plus platform\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan data-ds-price=\"total-phase-promira-spi-active-level-2-analysis-application\"\u003e£245\u003c\/span\u003e plus platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf you need to watch I2C and SPI from one low-cost box at USB speeds, the Beagle I2C\/SPI does both. If you already own a Promira, or need an I2C protocol analyser that captures above 4 MHz or works over Ethernet, add I2C Analysis for \u003cspan data-ds-price=\"total-phase-promira-i2c-active-analysis-application\"\u003e£120\u003c\/span\u003e ex VAT.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eFinding why a PMBus regulator occasionally NAKs its host during power-up. Measuring clock stretching on a slow EEPROM against the master's timeout. Logging a sensor bus overnight in a thermal chamber to catch a temperature-dependent fault.\u003c\/p\u003e\n\u003cp\u003eI2C Analysis suits firmware and hardware engineers debugging I2C integration and test engineers chasing intermittent field failures.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Promira I2C Analysis Application from \u003cspan data-ds-price=\"total-phase-promira-i2c-active-analysis-application\"\u003e£120\u003c\/span\u003e ex VAT. For a formal quotation, \u003ca href=\"\/fr\/pages\/contact-us\"\u003erequest a quote from our team\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 5 October 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 Total Phase pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/i2c-analysis1\/\"\u003eI2C Analysis Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/solutions\/video\/updating-promira-serial-platform-firmware-license\/\"\u003eUpdating Promira firmware and licences\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/beagle-i2cspi\/\"\u003eBeagle I2C\/SPI Protocol Analyzer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/data-center\/\"\u003eData Center\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":55954031313271,"sku":"TP601110","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp601110-total-phase-promira-i2c-active-analysis-application-1261154496.png?v=1791203894","url":"https:\/\/thedebugstore.com\/fr\/products\/total-phase-promira-i2c-active-analysis-application","provider":"Debug Store","version":"1.0","type":"link"}