{"product_id":"segger-stm32h7-6-68-20-trace-reference-board","title":"Carte de référence de trace SEGGER STM332H7","description":"\u003cp\u003eThe SEGGER STM32H7 Trace Reference Board (part number 6.68.20) is an ETM trace target built on the ST STM32H743, an ARM Cortex-M7 microcontroller with a maximum CPU clock of 400 MHz, 4-bit trace reaching a maximum trace bandwidth of 1064 Mbps and a trace port clock of 266 MHz. It supports JTAG, SWD and SWO, takes its power from SEGGER J-Trace PRO through the trace header, and has example projects on SEGGER's Knowledge Base for both streaming trace and the on-chip trace buffer. It serves firmware engineers proving a Cortex-M7 trace setup and hardware engineers who need a reference for trace signal quality on a custom board.\u003c\/p\u003e\n\n\u003ch2\u003eCortex-M7 Streaming Trace Reference for J-Trace PRO\u003c\/h2\u003e\n\u003cp\u003eSEGGER states the prime purpose of the board as quickly setting up a reference project for instruction tracing, live code coverage and profiling. All trace signals on the board are optimised for signal quality, so the board gives a known-good result to compare against when trace on your own STM32H7 design is unreliable.\u003c\/p\u003e\n\n\u003ch2\u003eTrace Header, Test Points and Target Power\u003c\/h2\u003e\n\u003cp\u003eThe external debug header carries the trace pins. SEGGER's 19-pin JTAG\/SWD and trace connector assigns VTref, SWDIO\/TMS, SWCLK\/TCK, SWO\/TDO, TDI, nRESET, TRACECLK and TRACEDATA[0] to [3]; pins 3, 5, 15, 17 and 19 are GND and pin 9 is left open. J-Trace PRO can supply 5V to the target on pins 11 and 13, so the board needs no separate power cable: run power on perm in J-Link Commander, then connect the board, and the green Target power LED on the probe lights. All trace signals are also brought out as test points for oscilloscope measurements, and three LEDs are free for use in trace demo applications.\u003c\/p\u003e\n\n\u003ch2\u003eStreaming Trace and Trace Buffer Example Projects\u003c\/h2\u003e\n\u003cp\u003eSEGGER's STM32H7 Knowledge Base article names this board as its tested hardware and provides two tutorial projects. ST_STM32H7_Trace_Tutorial_Project demonstrates streaming trace with the core at 64 MHz and the trace clock at 32 MHz. ST_STM32H7_TraceBuffer_Tutorial_Project uses the on-chip trace buffer instead and is not intended for streaming trace. Both are prebuilt and run in Ozone without rebuilding; SEGGER Embedded Studio is used to rebuild them.\u003c\/p\u003e\n\u003cp\u003eFor streaming trace SEGGER lists J-Link software V6.60d or later, Ozone V3.10b or later and J-Trace PRO for Cortex-M hardware V1.0 or later. For TMC\/ETB trace through the trace buffer, SEGGER lists J-Link PLUS V10 or later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e6.68.20\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003ctd\u003eST STM32H743\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCore\u003c\/th\u003e\n\u003ctd\u003eARM Cortex-M7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. CPU clock\u003c\/th\u003e\n\u003ctd\u003e400 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eEmbedded Trace Macrocell (ETM), 4-bit trace port\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. trace bandwidth\u003c\/th\u003e\n\u003ctd\u003e1064 Mbps (4-bit trace)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace port clock\u003c\/th\u003e\n\u003ctd\u003e266 MHz (actual trace clock is half the TPIU frequency, sampled on both edges)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug connector\u003c\/th\u003e\n\u003ctd\u003eExternal debug header with trace pins (19-pin JTAG\/SWD and trace)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget power\u003c\/th\u003e\n\u003ctd\u003e5V from J-Trace PRO on pins 11 and 13\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTest points\u003c\/th\u003e\n\u003ctd\u003eAll trace signals\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLEDs\u003c\/th\u003e\n\u003ctd\u003e3, for demo applications\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eJ-Link software V6.60d or later; Ozone V3.10b or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this board, so the order is for the STM32H7 Trace Reference Board itself. The example projects are free downloads from SEGGER's Knowledge Base.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo trace probe is included. Streaming trace needs J-Trace PRO; the trace buffer example needs a J-Link PLUS V10 or later.\u003c\/li\u003e\n  \u003cli\u003eThe streaming trace tutorial runs the core at 64 MHz with a 32 MHz trace clock, not at the board's maximum figures.\u003c\/li\u003e\n  \u003cli\u003eSEGGER says the board can be used with other ARM emulators that share the same pinout, but at your own risk.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no dimensions or weight for the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTrace Reference Boards Compared\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003cth\u003eMax. CPU clock\u003c\/th\u003e\n\u003cth\u003eMax. trace bandwidth (4-bit)\u003c\/th\u003e\n\u003cth\u003eDebug interfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSTM32H7 Trace Reference Board (this product)\u003c\/td\u003e\n\u003ctd\u003eST STM32H743, Cortex-M7\u003c\/td\u003e\n\u003ctd\u003e400 MHz\u003c\/td\u003e\n\u003ctd\u003e1064 Mbps\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-stm32h7-6-68-20-trace-reference-board\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-6-68-19-nxp-imx-rt1050-trace-reference-board\"\u003eiMX RT1050 Trace Reference Board\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eNXP iMX RT1051\/52, Cortex-M7\u003c\/td\u003e\n\u003ctd\u003e600 MHz\u003c\/td\u003e\n\u003ctd\u003e1056 Mbps\u003c\/td\u003e\n\u003ctd\u003eSWD\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-68-19-nxp-imx-rt1050-trace-reference-board\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-6-68-18-cortex-m-trace-reference-board\"\u003eCortex-M Trace Reference Board\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eST STM32F407, Cortex-M4F\u003c\/td\u003e\n\u003ctd\u003e168 MHz\u003c\/td\u003e\n\u003ctd\u003e672 Mbps\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-68-18-cortex-m-trace-reference-board\"\u003e£19\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-trace-pro-cortex-m-8-18-00\"\u003eJ-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003eStreaming trace probe that powers and traces these boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eBringing up streaming trace and live code coverage in Ozone on a Cortex-M7 before the first custom STM32H7 boards arrive. Comparing ETB trace buffer capture with a J-Link PLUS against streaming capture with J-Trace PRO on the same target. Probing the trace test points as a signal quality reference while reviewing a new trace connector layout.\u003c\/p\u003e\n\u003cp\u003eThe board suits STM32H7 firmware teams and hardware engineers checking trace routing.\u003c\/p\u003e\n\n\u003cp\u003eOrder the STM32H7 Trace Reference Board for \u003cspan data-ds-price=\"segger-stm32h7-6-68-20-trace-reference-board\"\u003e£240\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/trace-reference-boards\/overview\/\"\u003eSEGGER Trace Reference Boards overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Tracing_on_ST_STM32H743\"\u003eSEGGER Knowledge Base: ST STM32H7 tracing\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/evaluation-boards\/trace-reference-boards\/stm32h7-trace-reference-board\"\u003eSEGGER shop: STM32H7 Trace Reference Board\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/evaluation-boards\/\"\u003eSEGGER evaluation boards price list (part numbers)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44272074916063,"sku":"6.68.20","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-6-68-20-40221168992479.jpg?v=1689688198","url":"https:\/\/thedebugstore.com\/fr\/products\/segger-stm32h7-6-68-20-trace-reference-board","provider":"Debug Store","version":"1.0","type":"link"}