{"product_id":"segger-8-07-10-j-trace-isolator-adapter","title":"Adaptateur d'isolateur SEGGER J-Trace","description":"\u003cp\u003eThe SEGGER J-Trace Isolator (part number 8.07.10) provides 1 kV DC basic electrical isolation between a J-Trace PRO and a target with the standard 0.05\" 19-pin Cortex-M connector, while passing JTAG, SWD and ETM trace. It works with 1.2V to 5V targets, at JTAG and SWD speeds up to 4 MHz and trace clocks up to 75 MHz. It is for trace and debug work where the probe and the target must be kept electrically separate.\u003c\/p\u003e\n\n\u003ch2\u003eIsolated ETM Trace on the 19-Pin Cortex-M Connector\u003c\/h2\u003e\n\u003cp\u003eBoth sides of the isolator use a 0.05\" 19-pin Cortex-M male connector: EMULATOR connects to the J-Trace cable and TARGET to the target cable. ETM trace pins are fully supported, with TRACECLK and TRACEDATA0 to TRACEDATA3 carried through high-speed digital isolators. SEGGER rates the trace clock at up to 75 MHz, the limit of the isolator IC, and reports up to 120 MHz in one example setup at room temperature with adjusted sampling delays in the J-Trace PRO.\u003c\/p\u003e\n\n\u003ch2\u003ePowered from the J-Trace PRO\u003c\/h2\u003e\n\u003cp\u003eThe probe powers the isolator logic through pins 11 and 13, so the J-Trace PRO must supply 5V there; SEGGER notes that you may need to run \"power on perm\" once in J-Link Commander. The target side draws only a few microamps (under 25 µA). Three LEDs show emulator power, target power and target RESET.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Trace Isolator\u003c\/li\u003e\n  \u003cli\u003e20-pin target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e1 kV DC, basic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003eEMULATOR and TARGET, each 0.05\" 19-pin Cortex-M male\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eJTAG frequency\u003c\/th\u003e\n\u003ctd\u003eUp to 4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWD frequency\u003c\/th\u003e\n\u003ctd\u003eUp to 4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace clock\u003c\/th\u003e\n\u003ctd\u003eUp to 75 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace signals\u003c\/th\u003e\n\u003ctd\u003eTRACECLK, TRACEDATA0 to TRACEDATA3\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eFrom the probe, 5V on pins 11 and 13; under 25 µA from target\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIndicators\u003c\/th\u003e\n\u003ctd\u003eEmulator power (green), target power (green), target RESET (red)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDesigned for\u003c\/th\u003e\n\u003ctd\u003eJ-Trace V2 or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic isolation only. SEGGER requires double or reinforced isolation to protect people from hazardous voltages, so do not rely on the isolator alone in that case.\u003c\/li\u003e\n  \u003cli\u003eJTAG and SWD are limited to 4 MHz, and trace clocks above 75 MHz are beyond the isolator IC's specification.\u003c\/li\u003e\n  \u003cli\u003eVTref (pin 1) must have no series resistor, and pin 9 should be left open on the target.\u003c\/li\u003e\n  \u003cli\u003eOther ARM emulators with the same pinout need 5V on pin 19 of the emulator connector; SEGGER states this is at your own risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace Isolator Compared with the J-Link Isolators\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolator\u003c\/th\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace Isolator (this product)\u003c\/td\u003e\n\u003ctd\u003e0.05\" 19-pin Cortex-M\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, up to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eETM, up to 75 MHz trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-00-jtag-isolator-adapter\"\u003eJ-Link JTAG Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e20-pin 0.1\" JTAG\u003c\/td\u003e\n\u003ctd\u003eJTAG, up to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-01-swd-isolator-adapter\"\u003eSWD Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e20-pin 0.1\" SWD\u003c\/td\u003e\n\u003ctd\u003eSWD and SWO, up to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the J-Trace Isolator for \u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e ex VAT, or ask us for a formal quotation. SEGGER lists it as suitable for the \u003ca href=\"\/fr\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e, J-Trace PRO Cortex-A\/R\/M, J-Trace PRO Cortex-M and J-Trace PRO RISC-V. See the full \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/isolators\/j-trace-isolator\/\"\u003eSEGGER J-Trace Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-swd-isolator\/\"\u003eSEGGER SWD Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/isolators\/jtag-isolator\/\"\u003eSEGGER JTAG Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173292255,"sku":"8.07.10","price":320.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-07-10-40213030895839.jpg?v=1689526567","url":"https:\/\/thedebugstore.com\/fr\/products\/segger-8-07-10-j-trace-isolator-adapter","provider":"Debug Store","version":"1.0","type":"link"}