{"product_id":"segger-8-07-01-swd-isolator-adapter","title":"Adaptateur d'isolateur SEGGER SWD","description":"\u003cp\u003eThe SEGGER SWD Isolator (part number 8.07.01) is an isolator box that sits between a J-Link or Flasher and the target, giving 1kV DC basic isolation on SWD, including SWO, at up to 4 MHz for target interface voltages from 1.2V to 5V. Both sides use 20-pin 0.1\" male SWD connectors; the isolator is powered from the probe side and draws less than 25µA on the target side. Use it where the debug or production tools do not share a ground with the application.\u003c\/p\u003e\n\n\u003ch2\u003eSWD Isolation for Motor Control, Sensor and Analogue Designs\u003c\/h2\u003e\n\u003cp\u003eSEGGER describes isolation as essential when the development or production tools are not connected to the same ground as the application. Motor control applications tend to introduce electrical spikes, and the isolator keeps them away from the probe; in sensor and analogue designs it keeps the debug system from disturbing the measurement. The isolator uses high-speed digital isolators for low propagation delay and passes SWCLK, SWDIO, SWO and RESET.\u003c\/p\u003e\n\u003cp\u003eThe probe side powers the isolator through pin 19, and the target side draws its power through VTref on pin 1; pin 19 is not connected on the target side. Pins 4, 6, 8, 10, 12, 14, 16, 18 and 20 are GND. Protection covers overvoltage and overcurrent on the probe side, overvoltage on the target VTref pin, and ESD. Four LEDs show probe or programmer power, probe or programmer overload, target power and target RESET. See our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide for the probe side.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSWD Isolator Box\u003c\/li\u003e\n  \u003cli\u003e0.1\" 20-pin ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e1kV DC, basic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eSWD with SWO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eSWCLK, SWDIO, SWO, RESET\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" male SWD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" male SWD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eFrom the probe side via pin 19; target side via VTref (pin 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side power consumption\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e73mm x 46mm x 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003ePRO PoE, PRO, Ultra, WiFi, PLUS, BASE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo JTAG, because there is no TDI connection. Use the JTAG Isolator for JTAG targets.\u003c\/li\u003e\n  \u003cli\u003ecJTAG works only if the probe uses the J-Link configuration, with TMSC on pin 7.\u003c\/li\u003e\n  \u003cli\u003eTarget interface speed is limited to 4 MHz.\u003c\/li\u003e\n  \u003cli\u003eBasic isolation only. Do not use it with hazardous voltages without a further protection measure such as double or reinforced isolation.\u003c\/li\u003e\n  \u003cli\u003eThird-party probes with the same pinout must supply 5V on pin 19; SEGGER states their use is at your own risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSWD Isolator Compared with Other SEGGER Isolators\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolator\u003c\/th\u003e\n\u003cth\u003eIsolated link\u003c\/th\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003cth\u003eMax. speed\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSWD Isolator (this product)\u003c\/td\u003e\n\u003ctd\u003eProbe to target, SWD and SWO, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-00-jtag-isolator-adapter\"\u003eJTAG Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProbe to target, JTAG, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-02-usb-isolator-adapter\"\u003eUSB Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHost PC to probe, USB\u003c\/td\u003e\n\u003ctd\u003e3kV DC for 1s, basic\u003c\/td\u003e\n\u003ctd\u003eUSB Full-Speed, 12 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-02-usb-isolator-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-10-j-trace-isolator-adapter\"\u003eJ-Trace Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eJ-Trace to target, JTAG, SWD, SWO and ETM trace, 19-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz debug, 75 MHz trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the SWD Isolator for \u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e ex VAT. Confirm that your target debugs over SWD at 4 MHz or below, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-swd-isolator\/\"\u003eSEGGER SWD Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-jtag-isolator\/\"\u003eSEGGER JTAG Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-usb-isolator\/\"\u003eSEGGER USB Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/isolators\/j-trace-isolator\/\"\u003eSEGGER J-Trace Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173226719,"sku":"8.07.01","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-07-01-segger-swd-isolator-adapter-8-07-01-42714419298527.png?v=1722900541","url":"https:\/\/thedebugstore.com\/fr\/products\/segger-8-07-01-swd-isolator-adapter","provider":"Debug Store","version":"1.0","type":"link"}