{"product_id":"segger-8-06-41-relay-adapter-uk","title":"Adaptateur de relais SEGGER","description":"\u003cp\u003eThe SEGGER Relay Adapter (part number 8.06.41) disconnects Flasher signals from the target by relay contacts, switching every line including GND and VTSUPPLY. It is built for production setups with automated test equipment (ATE), where several test and programming devices share the same nail-bed lines. It uses instrumentation grade reed relays rated at 1 A contact switch current, with initial contact resistance below 150 mOhms and insulation resistance above 10^12 Ohms.\u003c\/p\u003e\n\n\u003ch2\u003eFull Signal Disconnection on Shared Nail-Bed Lines\u003c\/h2\u003e\n\u003cp\u003eOn an ATE fixture, the programmer and other test devices can share the same nail-bed lines. The Relay Adapter sits between the Flasher and those lines and opens them by relay contacts, so the Flasher can be taken off the target completely. Every signal is switched, GND and VTSUPPLY included, and one additional switch contact is provided for customer use.\u003c\/p\u003e\n\n\u003ch2\u003eRelays Controlled by VTSUPPLY\u003c\/h2\u003e\n\u003cp\u003eAll relays are controlled by VTSUPPLY. The adapter draws less than 100 mA, taken from the Flasher's target supply rail, and SEGGER lists no separate power input for it. The adapter plugs into the standard 20-pin 0.1\" connector shared by Flasher and J-Link; pin assignments are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible SEGGER Programmers and Probes\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter for Flasher PRO, Flasher PRO XL, Flasher Compact and Flasher Portable PLUS, and for J-Link PRO PoE, J-Link PRO, J-Link ULTRA+, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.41\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelay type\u003c\/th\u003e\n\u003ctd\u003eInstrumentation grade reed relays\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eContact switch current\u003c\/th\u003e\n\u003ctd\u003e1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInitial contact resistance\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 150 mOhms\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInsulation resistance\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 10^12 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSwitched lines\u003c\/th\u003e\n\u003ctd\u003eAll signals, including GND and VTSUPPLY, plus one additional contact for customer use\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelay control\u003c\/th\u003e\n\u003ctd\u003eVTSUPPLY\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent consumption\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 100 mA, from the Flasher target supply rail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003e20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003eJ-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter, so we state only the Relay Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRelay control depends on VTSUPPLY, so plan the programmer's target supply setting into your fixture sequence.\u003c\/li\u003e\n  \u003cli\u003eThe relays separate programmer and target only while open. For isolation while programming, SEGGER offers the JTAG Isolator.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no dimensions or switching time for it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelay Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003cth\u003eTypical use\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRelay Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eDisconnects all programmer signals, GND and VTSUPPLY included, by reed relays\u003c\/td\u003e\n\u003ctd\u003eATE and nail-bed fixtures\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-41-relay-adapter-uk\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-00-jtag-isolator-adapter\"\u003eJ-Link JTAG Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eGalvanic isolation between probe and target\u003c\/td\u003e\n\u003ctd\u003eTools and application without a common ground\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-36-test-farm-power-adapter\"\u003eTest Farm Power Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote control of the test device's power supply\u003c\/td\u003e\n\u003ctd\u003ePower saving and automated reboots in test farms\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-36-test-farm-power-adapter\"\u003e£110\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-13-measurement-patch-adapter\"\u003eMeasurement Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTest points for all debug signals\u003c\/td\u003e\n\u003ctd\u003eProbing debug signals on the bench\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Relay Adapter for \u003cspan data-ds-price=\"segger-8-06-41-relay-adapter-uk\"\u003e£240\u003c\/span\u003e ex VAT. Send us your fixture details if you want a second opinion on the wiring, or ask for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/relay-adapter\/\"\u003eSEGGER Relay Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/flasher\/\"\u003eSEGGER Flasher pricing: adapters\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_-_Hardware\"\u003eSEGGER Knowledge Base: Flasher Hardware\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44703968264415,"sku":"8.06.41","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-41-segger-relay-adapter-8-06-41-debug-store-uk-41216364019935.jpg?v=1704973251","url":"https:\/\/thedebugstore.com\/fr\/products\/segger-8-06-41-relay-adapter-uk","provider":"Debug Store","version":"1.0","type":"link"}