{"product_id":"segger-6-68-19-nxp-imx-rt1050-trace-reference-board","title":"Carte de référence de trace SEGGER NXP iMX RT1050","description":"\u003cp\u003eThe SEGGER iMX RT1050 Trace Reference Board (part number 6.68.19) is an ETM trace target built on the NXP iMX RT1051\/52, an ARM Cortex-M7 microcontroller with a maximum CPU clock of 600 MHz, 4-bit trace reaching a maximum trace bandwidth of 1056 Mbps and a trace port clock of 264 MHz. It connects over SWD, takes its power from SEGGER J-Trace PRO through the trace header, and comes with an example project that runs out of the box. Use it to set up streaming trace, live code coverage and profiling on the iMX RT1050 before your own hardware is ready, or as a reference for trace signal quality.\u003c\/p\u003e\n\n\u003ch2\u003eStreaming Trace on the NXP iMX RT1050 with J-Trace PRO\u003c\/h2\u003e\n\u003cp\u003eSEGGER introduced the board to demonstrate streaming trace, live code coverage and profiling on the NXP iMX RT1050, and states its prime purpose as quickly setting up a reference project for instruction tracing, live code coverage and profiling. All trace signals on the board are optimised for signal quality, so it gives a known-good result to compare against when trace on a custom iMX RT design is unreliable.\u003c\/p\u003e\n\n\u003ch2\u003eTrace Header, Test Points and Target Power\u003c\/h2\u003e\n\u003cp\u003eThe external debug header carries the trace pins. SEGGER's 19-pin JTAG\/SWD and trace connector assigns VTref, SWDIO\/TMS, SWCLK\/TCK, SWO\/TDO, TDI, nRESET, TRACECLK and TRACEDATA[0] to [3]; pins 3, 5, 15, 17 and 19 are GND and pin 9 is left open. J-Trace PRO can supply 5V to the target on pins 11 and 13, so the board needs no separate power cable: run power on perm in J-Link Commander, then connect the board, and the green Target power LED on the probe lights. All trace signals are also brought out as test points for oscilloscope measurements, and three LEDs are free for use in trace demo applications.\u003c\/p\u003e\n\n\u003ch2\u003eExample Project and Software\u003c\/h2\u003e\n\u003cp\u003eSEGGER's trace reference board overview links the example project for this board, Tracing on NXP iMX RT1050, from its Knowledge Base, and states that each board comes with an example project that runs out of the box. Check that article for the current project download and software requirements before you start; SEGGER's minimum J-Link and Ozone versions differ between its other two boards.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e6.68.19\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003ctd\u003eNXP iMX RT1051\/52 (iMX RT1050)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCore\u003c\/th\u003e\n\u003ctd\u003eARM Cortex-M7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. CPU clock\u003c\/th\u003e\n\u003ctd\u003e600 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eEmbedded Trace Macrocell (ETM), 4-bit trace port\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. trace bandwidth\u003c\/th\u003e\n\u003ctd\u003e1056 Mbps (4-bit trace)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace port clock\u003c\/th\u003e\n\u003ctd\u003e264 MHz (actual trace clock is half the TPIU frequency, sampled on both edges)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug interface\u003c\/th\u003e\n\u003ctd\u003eSWD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug connector\u003c\/th\u003e\n\u003ctd\u003eExternal debug header with trace pins (19-pin JTAG\/SWD and trace)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget power\u003c\/th\u003e\n\u003ctd\u003e5V from J-Trace PRO on pins 11 and 13\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTest points\u003c\/th\u003e\n\u003ctd\u003eAll trace signals\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLEDs\u003c\/th\u003e\n\u003ctd\u003e3, for demo applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this board, so the order is for the iMX RT1050 Trace Reference Board itself. The example project is a free download from SEGGER's Knowledge Base.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo trace probe is included. SEGGER designed the board for J-Trace PRO, which captures the trace and powers the board.\u003c\/li\u003e\n  \u003cli\u003eSEGGER lists SWD as the debug interface for this board; JTAG and SWO are listed only for the STM32H7 and Cortex-M boards.\u003c\/li\u003e\n  \u003cli\u003eSEGGER says the board can be used with other ARM emulators that share the same pinout, but at your own risk.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no dimensions or weight for the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTrace Reference Boards Compared\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003cth\u003eMax. CPU clock\u003c\/th\u003e\n\u003cth\u003eMax. trace bandwidth (4-bit)\u003c\/th\u003e\n\u003cth\u003eDebug interfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eiMX RT1050 Trace Reference Board (this product)\u003c\/td\u003e\n\u003ctd\u003eNXP iMX RT1051\/52, Cortex-M7\u003c\/td\u003e\n\u003ctd\u003e600 MHz\u003c\/td\u003e\n\u003ctd\u003e1056 Mbps\u003c\/td\u003e\n\u003ctd\u003eSWD\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-68-19-nxp-imx-rt1050-trace-reference-board\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-stm32h7-6-68-20-trace-reference-board\"\u003eSTM32H7 Trace Reference Board\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eST STM32H743, Cortex-M7\u003c\/td\u003e\n\u003ctd\u003e400 MHz\u003c\/td\u003e\n\u003ctd\u003e1064 Mbps\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-stm32h7-6-68-20-trace-reference-board\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-6-68-18-cortex-m-trace-reference-board\"\u003eCortex-M Trace Reference Board\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eST STM32F407, Cortex-M4F\u003c\/td\u003e\n\u003ctd\u003e168 MHz\u003c\/td\u003e\n\u003ctd\u003e672 Mbps\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-68-18-cortex-m-trace-reference-board\"\u003e£19\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-trace-pro-cortex-m-8-18-00\"\u003eJ-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003eStreaming trace probe that powers and traces these boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSetting up streaming trace and live code coverage on an iMX RT1050 while custom boards are still in layout. Demonstrating instruction trace and profiling on a 600 MHz Cortex-M7 at a design review or training course. Measuring the trace clock and data lines at the test points as a reference when a trace connector on your own iMX RT board misbehaves.\u003c\/p\u003e\n\u003cp\u003eThe board suits firmware engineers working on NXP iMX RT parts and hardware engineers checking trace routing.\u003c\/p\u003e\n\n\u003cp\u003eOrder the iMX RT1050 Trace Reference Board for \u003cspan data-ds-price=\"segger-6-68-19-nxp-imx-rt1050-trace-reference-board\"\u003e£240\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/trace-reference-boards\/overview\/\"\u003eSEGGER Trace Reference Boards overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Tracing_on_NXP_iMX_RT1050_(iMX_RT1050_Trace_Reference_Board)\"\u003eSEGGER Knowledge Base: Tracing on NXP iMX RT1050\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/evaluation-boards\/trace-reference-boards\/nxp-imx-rt1050-trace-reference-board\"\u003eSEGGER shop: iMX RT1050 Trace Reference Board\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/news\/j-trace-pro-new-trace-reference-board-imx-rt1050\/\"\u003eSEGGER news: new trace reference board for NXP iMX RT1050\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/evaluation-boards\/\"\u003eSEGGER evaluation boards price list (part numbers)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44272074981599,"sku":"6.68.19","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-6-68-19-40221166403807.jpg?v=1689688208","url":"https:\/\/thedebugstore.com\/fr\/products\/segger-6-68-19-nxp-imx-rt1050-trace-reference-board","provider":"Debug Store","version":"1.0","type":"link"}