{"title":"SEGGER Microcontroller GmbH","description":"\u003cp data-mce-fragment=\"1\"\u003e SEGGER Microcontroller est un fournisseur leader de solutions de systèmes embarqués, offrant une gamme complète d'outils logiciels et matériels pour les développeurs. Avec plus de 30 ans d'expérience, SEGGER est spécialisé dans les RTOS, les bibliothèques de logiciels, les sondes de débogage et les outils de développement. Leurs produits sont connus pour leur fiabilité, leur efficacité et leur facilité d'utilisation, répondant aux besoins de diverses industries et applications du marché des systèmes embarqués.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","products":[{"product_id":"segger-j-link-pro-debugger-programmer-8-12-00","title":"SEGGER J-Link PRO : sonde de débogage Ethernet\/USB ultra-rapide","description":"\u003cp\u003eLe SEGGER J-Link PRO (référence 8.12.00) est une sonde de débogage JTAG\/SWD Ethernet et USB avec une vitesse d'interface cible jusqu'à 50 MHz, des vitesses de téléchargement jusqu'à 4 MB\/s et une interface cible de 1,2 V à 5 V. Il ajoute un port Ethernet 100 Mbit\/s avec serveur web intégré, une mesure analogique du courant à 200 kHz avec une résolution de 50 µA, ainsi que des licences J-Flash, Unlimited Flash Breakpoints, Ozone et RDI. Il convient aux équipes firmware qui doivent accéder à une cible via le réseau local, loin du PC hôte, sur des composants ARM Cortex, RISC-V, Renesas RX et Microchip PIC32.\u003c\/p\u003e\n\n\u003ch2\u003eDébogage JTAG\/SWD à distance via Ethernet\u003c\/h2\u003e\n\u003cp\u003eLa sonde se connecte en Ethernet 100 Mbit\/s ou en USB 2.0 Hi-Speed : le même appareil peut donc rester sur le bureau ou être placé sur le réseau. À la livraison, elle est configurée en DHCP, et une adresse statique peut être définie avec J-Link Configurator. Un serveur web intégré sur le port TCP 80 permet la configuration depuis un navigateur. SEGGER destine l'interface Ethernet au débogage à distance dans les équipes réparties et les grands environnements de développement. Les lignes de données Ethernet sont isolées selon IEEE 802.3, avec une tension d'essai de 1500 Vrms pendant une minute.\u003c\/p\u003e\n\n\u003ch2\u003eInterface 50 MHz, téléchargement à 4 MB\/s et mesure du courant\u003c\/h2\u003e\n\u003cp\u003eSEGGER annonce jusqu'à 50 MHz de vitesse d'interface cible et jusqu'à 4 MB\/s en téléchargement, contre 15 MHz et 1 MB\/s au maximum pour les J-Link BASE et PLUS. Le SWO est échantillonné jusqu'à 100 MHz. Le PRO mesure le courant de la cible avec une fréquence d'échantillonnage de 200 kHz et une résolution de 50 µA, et peut alimenter la cible en 5 V jusqu'à 300 mA à partir du rail USB. La cible utilise le connecteur J-Link standard 20 broches au pas de 0,1\" ; le brochage et les adaptateurs sont décrits dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003ebrochage du connecteur 20 broches SEGGER J-Link\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eInterfaces, cœurs pris en charge et licences\u003c\/h2\u003e\n\u003cp\u003eLes interfaces de débogage prises en charge sont JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE et Silicon Labs C2. La liste des cœurs de SEGGER couvre ARM Cortex-M0 à Cortex-M85, Cortex-A et Cortex-R, les anciens ARM7 à ARM11, les cœurs RISC-V de SiFive, Andes, Codasip et Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 et Cadence Tensilica Xtensa. La licence J-Flash est préinstallée sur la sonde, il n'y a donc rien à activer ; Unlimited Flash Breakpoints, Ozone et RDI sont également inclus. Le débogage en mode moniteur est pris en charge sur les cœurs ARMv7-M et ARMv8-M, ainsi que RTT et VCOM (broches 5 et 17, SWD uniquement).\u003c\/p\u003e\n\n\u003ch2\u003eCompatibilité logiciels et IDE\u003c\/h2\u003e\n\u003cp\u003eLe logiciel J-Link est gratuit, sous Windows et Linux (x86-64 et ARM64) et macOS (x86-64 et Apple Silicon). SEGGER indique notamment la prise en charge dans SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso et Visual Studio Code.\u003c\/p\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cp\u003eSonde J-Link PRO, câble plat 20 broches au pas de 0,1\" et un câble USB-C.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaces hôte\u003c\/th\u003e\n\u003ctd\u003eEthernet 100 Mbit\/s ; USB 2.0 Hi-Speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnecteur cible\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20 broches, 0,1\" (2,54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaces de débogage prises en charge\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTension d'interface cible (VIF)\u003c\/th\u003e\n\u003ctd\u003e1,2 V à 5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCourant consommé sur VTref\u003c\/th\u003e\n\u003ctd\u003eMoins de 25 µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation de la cible\u003c\/th\u003e\n\u003ctd\u003e5 V (issu de l'USB), 300 mA max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse d'interface cible\u003c\/th\u003e\n\u003ctd\u003e50 MHz max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFréquence d'échantillonnage SWO\u003c\/th\u003e\n\u003ctd\u003e100 MHz max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMesure du courant\u003c\/th\u003e\n\u003ctd\u003eFréquence d'échantillonnage 200 kHz, résolution 50 µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation Ethernet\u003c\/th\u003e\n\u003ctd\u003eLignes de données selon IEEE 802.3, 1500 Vrms pendant une minute\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLicences incluses\u003c\/th\u003e\n\u003ctd\u003eJ-Flash (préinstallée), Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e100 mm x 53 mm x 27 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePoids (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e73 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de fonctionnement\u003c\/th\u003e\n\u003ctd\u003e+5 °C à +60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de stockage\u003c\/th\u003e\n\u003ctd\u003e-20 °C à +65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHumidité relative\u003c\/th\u003e\n\u003ctd\u003e90 % HR max., sans condensation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCEM\u003c\/th\u003e\n\u003ctd\u003eEN 55024, EN 55032\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystème d'exploitation hôte\u003c\/th\u003e\n\u003ctd\u003eWindows et Linux (x86-64, ARM64) ; macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUne seule connexion Ethernet est prise en charge à la fois.\u003c\/li\u003e\n  \u003cli\u003ePas de Power over Ethernet ; pour les nœuds de bancs de test alimentés en PoE, choisissez le J-Link PRO PoE.\u003c\/li\u003e\n  \u003cli\u003eLe blindage Ethernet n'est pas isolé ; SEGGER préconise un câble à paires torsadées non blindé pour une isolation efficace.\u003c\/li\u003e\n  \u003cli\u003eLes valeurs de 50 MHz et 4 MB\/s sont des maximums ; la fréquence d'interface utilisable et le débit de programmation flash dépendent du composant cible.\u003c\/li\u003e\n  \u003cli\u003ePas de trace ETM sur Cortex-M (utilisez un SEGGER J-Trace) et pas d'interface cible QSPI.\u003c\/li\u003e\n  \u003cli\u003eVCOM n'est disponible que lors du débogage en SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link PRO comparé aux modèles apparentés\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModèle\u003c\/th\u003e\n\u003cth\u003eInterface hôte\u003c\/th\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003cth\u003eVitesse d'interface cible\u003c\/th\u003e\n\u003cth\u003eEthernet\u003c\/th\u003e\n\u003cth\u003ePower over Ethernet\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-link-ultra-plus-8-16-28\"\u003eJ-Link ULTRA+ (J-Link Ultra)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-ultra-plus-8-16-28\"\u003e£870\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link PRO (ce produit)\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed et Ethernet 100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eOui\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003eJ-Link PRO PoE\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed et Ethernet 100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eOui\u003c\/td\u003e\n\u003ctd\u003eOui, IEEE 802.3af\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-link-wifi-8-14-28\"\u003eJ-Link WiFi\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed et WiFi IEEE 802.11 b\/g\/n\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-wifi-8-14-28\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eApplications typiques\u003c\/h2\u003e\n\u003cp\u003eDéboguer une carte Cortex-M33 ou Cortex-A dans un laboratoire depuis un bureau situé à un autre étage, via le réseau local de l'entreprise. Matériel de banc partagé par une équipe firmware répartie, accessible par adresse IP plutôt que par câble USB.\u003c\/p\u003e\n\u003cp\u003eChoisissez l'ULTRA+ pour les mêmes valeurs de 50 MHz et 4 MB\/s en USB uniquement, ou le PRO PoE pour des nœuds de bancs de test alimentés par le réseau.\u003c\/p\u003e\n\n\u003cp\u003eCommandez le J-Link PRO pour \u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e HT. Vérifiez votre référence dans la liste des composants pris en charge de SEGGER, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003esondes de débogage SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière révision le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (7 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-pro\/\"\u003ePage produit SEGGER J-Link Pro\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_PRO\"\u003eBase de connaissances SEGGER : J-Link PRO\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Setting_up_Ethernet_interface\"\u003eBase de connaissances SEGGER : configuration de l'interface Ethernet\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-pro-poe\/\"\u003ePage produit SEGGER J-Link Pro PoE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003eTarifs et licences SEGGER J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eBase de connaissances SEGGER : utilisation de la fonction VCOM du J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eBase de connaissances SEGGER : IDE pris en charge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263171948767,"sku":"8.12.00","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-12-00-40189792583903.jpg?v=1688907179"},{"product_id":"segger-j-link-ultra-plus-8-16-28","title":"Sonde de débogage JTAG\/SWD ultra-rapide SEGGER J-Link ULTRA+","description":"\u003cp\u003eLa SEGGER J-Link ULTRA+ (référence 8.16.28, listée par SEGGER sous le nom J-Link Ultra) est une sonde de débogage JTAG\/SWD USB offrant une vitesse d'interface cible jusqu'à 50 MHz, des vitesses de téléchargement jusqu'à 4 MB\/s et une interface cible de 1,2V à 5V. Elle ajoute une mesure analogique du courant à 200 kHz avec une résolution de 50µA, et inclut les licences J-Flash, Unlimited Flash Breakpoints, Ozone et RDI. Elle convient aux équipes firmware qui flashent de grosses images plusieurs fois par jour sur des cibles ARM Cortex, RISC-V, Renesas RX et Microchip PIC32 et veulent voir la consommation de courant pendant le débogage.\u003c\/p\u003e\n\n\u003ch2\u003eJTAG\/SWD haute vitesse face à la J-Link PLUS\u003c\/h2\u003e\n\u003cp\u003eSEGGER annonce pour l'ULTRA+ jusqu'à 4 MB\/s en téléchargement et jusqu'à 50 MHz de vitesse d'interface cible, contre jusqu'à 1 MB\/s et 15 MHz pour les J-Link BASE et PLUS. Selon SEGGER, elle est 100% compatible avec la J-Link PLUS, simplement plus rapide : les projets et scripts J-Link existants fonctionnent sans modification. Le temps réel de programmation flash dépend du composant cible. Le SWO est échantillonné jusqu'à 100 MHz.\u003c\/p\u003e\n\n\u003ch2\u003eMesure du courant pendant le débogage\u003c\/h2\u003e\n\u003cp\u003eL'ULTRA+ mesure le courant de la cible à une fréquence d'échantillonnage de 200 kHz avec une résolution de 50µA. Sur les conceptions basse consommation, cela fait apparaître les pics de courant et l'entrée en mode veille pendant une session de débogage ; avec une résolution de 50µA, elle ne remplace pas un appareil de mesure dédié pour les courants de veille de l'ordre du microampère. La sonde peut aussi alimenter la cible en 5V jusqu'à 300mA à partir de l'alimentation USB.\u003c\/p\u003e\n\n\u003ch2\u003eInterfaces, cœurs pris en charge et licences\u003c\/h2\u003e\n\u003cp\u003eLa liaison hôte est en USB 2.0 Hi-Speed via USB-C. Côté cible, la sonde utilise le connecteur J-Link standard 20 broches au pas de 0,1\" ; brochage et adaptateurs sont décrits dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e. Les interfaces de débogage prises en charge sont JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE et Silicon Labs C2. La liste des cœurs de SEGGER couvre les ARM Cortex-M0 à Cortex-M85, Cortex-A et Cortex-R, les anciens ARM7 à ARM11, les cœurs RISC-V de SiFive, Andes, Codasip et Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 et Cadence Tensilica Xtensa. Les licences J-Flash, Unlimited Flash Breakpoints, Ozone et RDI sont incluses, ainsi que RTT et VCOM (broches 5 et 17, en SWD uniquement).\u003c\/p\u003e\n\n\u003ch2\u003eCompatibilité logicielle et IDE\u003c\/h2\u003e\n\u003cp\u003eLe logiciel J-Link est gratuit, sous Windows et Linux (x86-64 et ARM64) et macOS (x86-64 et Apple Silicon). SEGGER indique notamment la prise en charge dans SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso et Visual Studio Code.\u003c\/p\u003e\n\n\u003ch2\u003eContenu de la boîte\u003c\/h2\u003e\n\u003cp\u003eSonde J-Link ULTRA+, câble plat 20 broches au pas de 0,1\" et câble USB-C.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterface hôte\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnecteur cible\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20 broches, 0,1\" (2,54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaces de débogage prises en charge\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTension d'interface cible (VIF)\u003c\/th\u003e\n\u003ctd\u003e1,2V à 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCourant consommé sur VTref\u003c\/th\u003e\n\u003ctd\u003eMoins de 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation de la cible\u003c\/th\u003e\n\u003ctd\u003e5V (issue de l'USB), 300mA max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse d'interface cible\u003c\/th\u003e\n\u003ctd\u003e50 MHz max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFréquence d'échantillonnage SWO\u003c\/th\u003e\n\u003ctd\u003e100 MHz max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMesure du courant\u003c\/th\u003e\n\u003ctd\u003eFréquence d'échantillonnage 200 kHz, résolution 50µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLicences incluses\u003c\/th\u003e\n\u003ctd\u003eJ-Flash, Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e72mm x 45mm x 18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePoids (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e40g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de fonctionnement\u003c\/th\u003e\n\u003ctd\u003e+5°C à +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de stockage\u003c\/th\u003e\n\u003ctd\u003e-20°C à +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHumidité relative\u003c\/th\u003e\n\u003ctd\u003e90% rH max., sans condensation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCEM\u003c\/th\u003e\n\u003ctd\u003eEN 55032, EN 55035\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystème d'exploitation hôte\u003c\/th\u003e\n\u003ctd\u003eWindows et Linux (x86-64, ARM64) ; macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUSB uniquement. Pour un accès Ethernet, choisissez la J-Link PRO, ou la J-Link PRO PoE pour le Power over Ethernet.\u003c\/li\u003e\n  \u003cli\u003eLes valeurs de 50 MHz et 4 MB\/s sont des maximums ; l'horloge d'interface utilisable et le débit de programmation flash dépendent du composant cible.\u003c\/li\u003e\n  \u003cli\u003ePas de trace ETM sur Cortex-M (utilisez une SEGGER J-Trace) et pas d'interface cible QSPI.\u003c\/li\u003e\n  \u003cli\u003eLe VCOM n'est disponible que lors du débogage en SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link ULTRA+ comparée aux PLUS et PRO\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModèle\u003c\/th\u003e\n\u003cth\u003eInterface hôte\u003c\/th\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003cth\u003eVitesse d'interface cible\u003c\/th\u003e\n\u003cth\u003eEthernet\u003c\/th\u003e\n\u003cth\u003ePower over Ethernet\u003c\/th\u003e\n\u003cth\u003eCœurs pris en charge\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link ULTRA+ (J-Link Ultra, ce produit)\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-ultra-plus-8-16-28\"\u003e£870\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-link-pro-debugger-programmer-8-12-00\"\u003eJ-Link PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed et Ethernet 100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eOui\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003eJ-Link PRO PoE\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed et Ethernet 100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eOui\u003c\/td\u003e\n\u003ctd\u003eOui, IEEE 802.3af\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eApplications typiques\u003c\/h2\u003e\n\u003cp\u003eTéléchargements répétés d'images de plusieurs mégaoctets sur des cibles Cortex-A ou Cortex-M7 avec flash externe pendant le développement. Observation du courant actif et des pics de réveil sur une conception basse consommation nRF ou STM32L lors de l'exécution pas à pas du code ; le courant de veille de l'ordre du microampère nécessite toujours un appareil de mesure dédié. Débogage en SWD à 50 MHz sur des composants Cortex-M33 rapides pour lesquels une sonde à 15 MHz constitue le goulot d'étranglement.\u003c\/p\u003e\n\u003cp\u003eChoisissez plutôt la J-Link PRO ou la PRO PoE si la sonde doit être raccordée à un réseau plutôt qu'à un port USB.\u003c\/p\u003e\n\n\u003cp\u003eCommandez la J-Link ULTRA+ pour \u003cspan data-ds-price=\"segger-j-link-ultra-plus-8-16-28\"\u003e£870\u003c\/span\u003e HT. Vérifiez votre référence dans la liste des composants pris en charge de SEGGER, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-j-link-debug-probes\"\u003eSEGGER J-Link debug probes\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière révision : 30 octobre 2026\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (8 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-ultra\/\"\u003ePage produit SEGGER J-Link Ultra\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop-us.segger.com\/product\/j-link-ultra-8-16-28\/\"\u003eBoutique SEGGER US : J-Link Ultra (8.16.28)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_ULTRA\"\u003eSEGGER Knowledge Base : J-Link Ultra\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-plus\/\"\u003ePage produit SEGGER J-Link PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-pro\/\"\u003ePage produit SEGGER J-Link Pro\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-pro-poe\/\"\u003ePage produit SEGGER J-Link Pro PoE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base : Using J-Link VCOM functionality\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base : Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263171981535,"sku":"8.16.28","price":870.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-16-28-segger-j-link-ultra-debug-flash-probe-8-16-28-72648636039543.png?v=1736472523"},{"product_id":"segger-j-link-wifi-8-14-28","title":"Sonde de débogage sans fil SEGGER J-Link WiFi (8.14.28)","description":"\u003cp\u003eLe SEGGER J-Link WiFi (référence 8.14.28) est une sonde de débogage JTAG\/SWD qui se connecte à l'hôte en WiFi IEEE 802.11 b\/g\/n dans la bande 2,4 GHz, ou en USB 2.0 Hi-Speed. Elle offre une vitesse d'interface cible jusqu'à 15 MHz, des vitesses de téléchargement jusqu'à 1 Mo\/s et une interface cible de 1,2 V à 5 V. SEGGER y associe les licences J-Flash, Unlimited Flash Breakpoints, Ozone et RDI. Elle est conçue pour des cibles en mouvement, comme en robotique, ou qui doivent rester blindées ou en zone dangereuse, à l'écart du PC de développement.\u003c\/p\u003e\n\n\u003ch2\u003eSonde de débogage JTAG\/SWD sans fil pour cibles mobiles ou blindées\u003c\/h2\u003e\n\u003cp\u003eLa sonde se déplace avec la cible et communique avec le PC en WiFi : un bras robotisé ou une plateforme mobile peut ainsi être débogué sans câble USB qui traîne jusqu'au poste de travail. Lorsque la cible fonctionne dans un environnement dangereux, le PC et l'ingénieur peuvent rester à l'extérieur, derrière une barrière physique. Le J-Link WiFi est alimenté par USB et partage cette alimentation avec la cible : il peut alimenter la cible en 5 V jusqu'à 300 mA. Côté cible, il utilise le connecteur J-Link standard 20 broches au pas de 0,1\". Le brochage et les options d'adaptateur figurent dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eConfiguration WiFi via USB\u003c\/h2\u003e\n\u003cp\u003eLe réseau se configure pendant que la sonde est connectée en USB. Dans J-Link Configurator, vous saisissez le SSID et le mot de passe dans la section de configuration WiFi ; dans J-Link Commander, la commande SetWifi définit le SSID. SEGGER précise que les sondes WiFi n'apparaissent généralement dans J-Link Configurator qu'en connexion USB, et que la découverte UDP ne fonctionne en général pas avec elles.\u003c\/p\u003e\n\n\u003ch2\u003eLicences, interfaces de débogage, RTT et VCOM\u003c\/h2\u003e\n\u003cp\u003eLa présentation des licences SEGGER indique J-Flash, Unlimited Flash Breakpoints, Ozone et RDI comme incluses avec le J-Link WiFi, ainsi que le débogage en mode moniteur. Les interfaces de débogage prises en charge sont JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE et Silicon Labs C2. La liste des cœurs SEGGER couvre ARM Cortex-M, Cortex-A et Cortex-R, les anciens ARM7 à ARM11, les cœurs RISC-V de SiFive, Andes, Codasip et Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 et Cadence Tensilica Xtensa. Real Time Transfer (RTT) échange des données entre la cible en cours d'exécution et l'hôte via la liaison de débogage, et VCOM relie un UART de la cible à un port COM virtuel lors du débogage en SWD.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibilité logiciels et IDE\u003c\/h2\u003e\n\u003cp\u003eLe logiciel J-Link est gratuit. Il fonctionne sous Windows (x86-64 et ARM64), Linux (x86-64 et ARM64) et macOS (x86-64 et Apple Silicon). SEGGER indique notamment la prise en charge dans SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso et Visual Studio Code.\u003c\/p\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cp\u003eSonde J-Link WiFi, câble plat 20 broches au pas de 0,1\" et un câble USB.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaces hôte\u003c\/th\u003e\n\u003ctd\u003eWiFi IEEE 802.11 b\/g\/n, 2,4 GHz ; USB 2.0 Hi-Speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnecteur cible\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20 broches, 0,1\" (2,54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaces de débogage prises en charge\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTension d'interface cible (VIF)\u003c\/th\u003e\n\u003ctd\u003e1,2 V à 5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCourant prélevé sur VTref\u003c\/th\u003e\n\u003ctd\u003eMoins de 25 µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation de la cible\u003c\/th\u003e\n\u003ctd\u003e5 V (issue de l'USB), 300 mA max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse d'interface cible\u003c\/th\u003e\n\u003ctd\u003e15 MHz max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFréquence d'échantillonnage SWO\u003c\/th\u003e\n\u003ctd\u003e30 MHz max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003ctd\u003eJusqu'à 1 Mo\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation\u003c\/th\u003e\n\u003ctd\u003ePar USB, 220 mA max. sous 5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLicences incluses\u003c\/th\u003e\n\u003ctd\u003eJ-Flash, Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e103 mm x 53 mm x 28 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePoids (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e70 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de fonctionnement\u003c\/th\u003e\n\u003ctd\u003e+5 °C à +60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de stockage\u003c\/th\u003e\n\u003ctd\u003e-20 °C à +65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHumidité relative\u003c\/th\u003e\n\u003ctd\u003e90 % HR max., sans condensation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNormes (indiquées par SEGGER sous CEM)\u003c\/th\u003e\n\u003ctd\u003eEN 301 489-1\/-17, EN 300 328, EN 62368\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystèmes d'exploitation hôte\u003c\/th\u003e\n\u003ctd\u003eWindows et Linux (x86-64, ARM64) ; macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWiFi uniquement en IEEE 802.11 b\/g\/n dans la bande 2,4 GHz.\u003c\/li\u003e\n  \u003cli\u003eLa première configuration WiFi nécessite une connexion USB, et la découverte UDP ne fonctionne généralement pas en WiFi.\u003c\/li\u003e\n  \u003cli\u003eLa vitesse de téléchargement atteint 1 Mo\/s et la vitesse d'interface cible 15 MHz ; les modèles J-Link ULTRA+ et PRO montent jusqu'à 4 Mo\/s et 50 MHz.\u003c\/li\u003e\n  \u003cli\u003ePas de trace ETM sur Cortex-M (utilisez une SEGGER J-Trace) ni d'interface cible QSPI.\u003c\/li\u003e\n  \u003cli\u003eVCOM n'est disponible qu'en débogage SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link WiFi comparé aux PLUS et PRO\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModèle\u003c\/th\u003e\n\u003cth\u003eInterface hôte\u003c\/th\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003cth\u003eVitesse d'interface cible\u003c\/th\u003e\n\u003cth\u003eEthernet\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link WiFi (ce produit)\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed et WiFi IEEE 802.11 b\/g\/n\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 1 Mo\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-wifi-8-14-28\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 1 Mo\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-link-pro-debugger-programmer-8-12-00\"\u003eJ-Link PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed et Ethernet 100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 Mo\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eOui\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003eJ-Link PRO PoE\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed et Ethernet 100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 Mo\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eOui, avec PoE IEEE 802.3af\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eApplications typiques\u003c\/h2\u003e\n\u003cp\u003eDéboguer le contrôleur moteur Cortex-M d'un robot mobile pendant qu'il roule, avec les journaux RTT renvoyés en continu vers le PC. Développer le firmware d'une cible qui fonctionne dans une chambre d'essai ou une cellule de machine protégée, l'ingénieur restant à l'extérieur de la barrière.\u003c\/p\u003e\n\u003cp\u003eSi la sonde peut rester raccordée à un réseau filaire, le J-Link PRO apporte 50 MHz et 4 Mo\/s via Ethernet.\u003c\/p\u003e\n\n\u003cp\u003eCommandez le J-Link WiFi pour \u003cspan data-ds-price=\"segger-j-link-wifi-8-14-28\"\u003e£1,100\u003c\/span\u003e HT. Vérifiez votre référence dans la liste des composants pris en charge par SEGGER, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003esondes de débogage SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière vérification le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-wifi\/\"\u003ePage produit SEGGER J-Link WiFi\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_WiFi\"\u003eSEGGER Knowledge Base : J-Link WiFi\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Setting_up_Ethernet_interface\"\u003eSEGGER Knowledge Base : Setting up Ethernet interface (configuration WiFi)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003eTarifs et licences SEGGER J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop-us.segger.com\/product\/j-link-wifi-8-14-28\/\"\u003eBoutique SEGGER US : J-Link WiFi (8.14.28)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base : Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172014303,"sku":"8.14.28","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-14-28-segger-j-link-wifi-8-14-28-42714466615519.png?v=1722900000"},{"product_id":"segger-8-02-28-j-link-plus-classic-debugger","title":"SEGGER J-Link PLUS Classic – Sonde de débogage USB JTAG\/SWD","description":"\u003cp\u003eLe SEGGER J-Link PLUS Classic (référence 8.08.28) est une sonde de débogage USB JTAG\/SWD avec une interface cible de 1,2V à 5V, une vitesse d'interface cible jusqu'à 15 MHz et des vitesses de téléchargement jusqu'à 1 MB\/s. Il reprend la spécification électrique du J-Link BASE et ajoute les licences J-Flash, Unlimited Flash Breakpoints, Ozone et RDI : une seule sonde de bureau couvre ainsi le débogage du firmware en flash et la programmation flash de petites séries. Il convient à la mise en route de firmware sur des cibles ARM Cortex, RISC-V, Renesas RX et Microchip PIC32 lorsqu'une connexion USB à l'hôte suffit.\u003c\/p\u003e\n\n\u003ch2\u003eLicences J-Link PLUS incluses dans la sonde\u003c\/h2\u003e\n\u003cp\u003eLa licence J-Flash est préinstallée dans la sonde : il n'y a rien à activer. J-Flash programme la flash interne et externe sans IDE. Unlimited Flash Breakpoints vous permet de placer en flash davantage de points d'arrêt que le nombre de points d'arrêt matériels du cœur. Ozone, le débogueur autonome de SEGGER, et la licence RDI complètent l'ensemble. Le débogage en mode moniteur est pris en charge sur les cœurs ARMv7-M et ARMv8-M.\u003c\/p\u003e\n\n\u003ch2\u003eSonde de débogage USB JTAG\/SWD pour cibles de 1,2V à 5V\u003c\/h2\u003e\n\u003cp\u003eLa liaison avec l'hôte se fait en USB 2.0 Hi-Speed via un connecteur USB type B, et la sonde est alimentée par USB. Côté cible, elle utilise le connecteur J-Link standard 20 broches au pas de 0,1\" ; le brochage et les adaptateurs disponibles sont détaillés dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eBrochage du connecteur 20 broches SEGGER J-Link\u003c\/a\u003e. Les interfaces de débogage prises en charge sont JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE et Silicon Labs C2. La sonde peut alimenter la cible en 5V jusqu'à 300mA à partir du rail USB.\u003c\/p\u003e\n\n\u003ch2\u003eCœurs pris en charge, RTT et VCOM\u003c\/h2\u003e\n\u003cp\u003eLa liste des cœurs pris en charge par SEGGER pour le J-Link PLUS couvre les ARM Cortex-M0 à Cortex-M85, Cortex-A et Cortex-R, les anciens ARM7 à ARM11, les cœurs RISC-V de SiFive, Andes, Codasip et Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 et Cadence Tensilica Xtensa. Real Time Transfer (RTT) échange des données entre la cible en fonctionnement et l'hôte via la connexion de débogage. Lorsqu'un UART est disponible, VCOM le relie à un port COM virtuel par les broches 5 (J-Link Tx) et 17 (J-Link Rx) du connecteur 20 broches, lors d'un débogage en SWD.\u003c\/p\u003e\n\n\u003ch2\u003eLogiciels et compatibilité IDE\u003c\/h2\u003e\n\u003cp\u003eLe logiciel J-Link est gratuit. Il fonctionne sous Windows (x86-64 et ARM64), Linux (x86-64 et ARM64) et macOS (x86-64 et Apple Silicon). SEGGER indique notamment la prise en charge dans SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso et Visual Studio Code. Plusieurs J-Link peuvent fonctionner sur un même PC, chacun identifié par son numéro de série.\u003c\/p\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cp\u003eSonde J-Link PLUS Classic, câble plat 20 broches au pas de 0,1\" et un câble USB.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterface hôte\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB type B\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnecteur cible\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20 broches, 0,1\" (2,54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaces de débogage prises en charge\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTension de l'interface cible (VIF)\u003c\/th\u003e\n\u003ctd\u003e1,2V à 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCourant prélevé sur VTref\u003c\/th\u003e\n\u003ctd\u003eMoins de 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation de la cible\u003c\/th\u003e\n\u003ctd\u003e5V (issue de l'USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse de l'interface cible\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFréquence d'échantillonnage SWO\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003ctd\u003eJusqu'à 1 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation\u003c\/th\u003e\n\u003ctd\u003ePar USB, max. 50mA plus le courant d'alimentation de la cible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLicences incluses\u003c\/th\u003e\n\u003ctd\u003eJ-Flash (préinstallée), Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e100mm x 53mm x 27mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePoids (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e70g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de fonctionnement\u003c\/th\u003e\n\u003ctd\u003e+5°C à +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de stockage\u003c\/th\u003e\n\u003ctd\u003e-20°C à +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHumidité relative\u003c\/th\u003e\n\u003ctd\u003eMax. 90% HR, sans condensation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystème d'exploitation hôte\u003c\/th\u003e\n\u003ctd\u003eWindows et Linux (x86-64, ARM64) ; macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUSB uniquement. Pour un accès Ethernet, choisissez le J-Link PRO, ou le J-Link PRO PoE pour l'alimentation Power over Ethernet.\u003c\/li\u003e\n  \u003cli\u003eLa vitesse de téléchargement atteint 1 MB\/s et la vitesse d'interface cible 15 MHz ; les modèles J-Link ULTRA+ et PRO montent jusqu'à 4 MB\/s et 50 MHz.\u003c\/li\u003e\n  \u003cli\u003ePas de trace ETM sur Cortex-M (utilisez SEGGER J-Trace) et pas d'interface cible QSPI.\u003c\/li\u003e\n  \u003cli\u003eVCOM n'est disponible que lors d'un débogage en SWD.\u003c\/li\u003e\n  \u003cli\u003eSi vous n'avez besoin que du débogage sans les licences, le \u003ca href=\"\/fr\/products\/segger-8-08-00-j-link-base-classic\"\u003eJ-Link BASE Classic\u003c\/a\u003e partage la même spécification matérielle ; les possesseurs d'un BASE peuvent ajouter les licences avec le \u003ca href=\"\/fr\/products\/j-link-upgrade-base-to-plus\"\u003eJ-Link Upgrade BASE to PLUS\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link PLUS Classic comparé aux ULTRA+ et PRO\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModèle\u003c\/th\u003e\n\u003cth\u003eInterface hôte\u003c\/th\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003cth\u003eVitesse d'interface cible\u003c\/th\u003e\n\u003cth\u003eEthernet\u003c\/th\u003e\n\u003cth\u003ePower over Ethernet\u003c\/th\u003e\n\u003cth\u003eCœurs pris en charge\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link PLUS Classic (ce produit)\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-link-ultra-plus-8-16-28\"\u003eJ-Link ULTRA+ (J-Link Ultra)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-ultra-plus-8-16-28\"\u003e£870\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-link-pro-debugger-programmer-8-12-00\"\u003eJ-Link PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed et Ethernet 100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eOui\u003c\/td\u003e\n\u003ctd\u003eNon\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003eJ-Link PRO PoE\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed et Ethernet 100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 50 MHz\u003c\/td\u003e\n\u003ctd\u003eOui\u003c\/td\u003e\n\u003ctd\u003eOui, IEEE 802.3af\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\/A\/R, RISC-V, Renesas RX, PIC32, EFM8\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eApplications typiques\u003c\/h2\u003e\n\u003cp\u003eDébogage au niveau source de code STM32 ou NXP Kinetis exécuté en flash, avec plus de points d'arrêt que n'en offre la FPB du Cortex-M. Programmation de lots de cartes avec J-Flash entre deux préséries, sans acheter de licence de programmation séparée. Journalisation RTT lors de la mise en route du firmware sur une carte Cortex-M33 ou RISC-V sans UART libre.\u003c\/p\u003e\n\u003cp\u003eChoisissez plutôt l'ULTRA+ si le temps de téléchargement ou une horloge d'interface de 50 MHz est déterminant.\u003c\/p\u003e\n\n\u003cp\u003eCommandez le J-Link PLUS Classic pour \u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e HT. Vérifiez votre référence de composant dans la liste des composants pris en charge par SEGGER, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-j-link-debug-probes\"\u003eSondes de débogage SEGGER J-Link\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière révision : 30 octobre 2026\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (7 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-plus\/\"\u003ePage produit SEGGER J-Link PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003ePage produit SEGGER J-Link BASE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_PLUS\"\u003eBase de connaissances SEGGER : J-Link PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-ultra\/\"\u003ePage produit SEGGER J-Link Ultra\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-pro-poe\/\"\u003ePage produit SEGGER J-Link Pro PoE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eBase de connaissances SEGGER : utilisation de la fonction VCOM du J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eBase de connaissances SEGGER : IDE pris en charge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172047071,"sku":"8.08.28","price":660.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-08-28-40212526891231.jpg?v=1689509114"},{"product_id":"segger-8-08-00-j-link-base-classic","title":"Sonde de débogage USB JTAG\/SWD SEGGER J-Link BASE Classic","description":"\u003cp\u003eLe SEGGER J-Link BASE Classic (référence 8.08.00) est une sonde de débogage JTAG\/SWD alimentée par USB, dans un boîtier de bureau de 100 mm x 53 mm x 27 mm, avec une interface cible de 1,2 V à 5 V, une vitesse d'interface cible jusqu'à 15 MHz et des vitesses de téléchargement jusqu'à 1 Mo\/s. Elle offre les mêmes fonctions J-Link BASE que le modèle Compact, avec un port hôte USB Type B. Elle convient à la mise au point du firmware et au débogage quotidien sur le poste de travail, sur des cibles ARM Cortex, RISC-V, Renesas RX et Microchip PIC32.\u003c\/p\u003e\n\n\u003ch2\u003eSonde de débogage JTAG\/SWD de bureau pour le poste de travail\u003c\/h2\u003e\n\u003cp\u003eLe Classic correspond au boîtier J-Link pleine taille, 70 g sans câbles, conçu pour être posé à côté de la carte sur le plan de travail. La liaison avec l'hôte se fait en USB 2.0 Hi-Speed via un connecteur USB Type B, et la sonde est alimentée par USB. Côté cible, elle utilise le connecteur J-Link standard 20 broches au pas de 0,1\", présent sur la plupart des modèles J-Link. Le brochage et les options d'adaptateur sont décrits dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eBrochage du connecteur 20 broches SEGGER J-Link\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eInterfaces cibles et cœurs pris en charge\u003c\/h2\u003e\n\u003cp\u003eLe matériel J-Link BASE actuel prend en charge JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE et Silicon Labs C2. La liste des cœurs pris en charge par SEGGER couvre ARM Cortex-M0 à Cortex-M85, Cortex-A et Cortex-R, les anciens ARM7 à ARM1176, les cœurs RISC-V de SiFive, Andes, Codasip et Nuclei, Renesas RX, Microchip PIC32 et Silicon Labs EFM8. La sonde peut aussi alimenter la cible en 5 V jusqu'à 300 mA à partir du bus USB.\u003c\/p\u003e\n\n\u003ch2\u003ePrise en charge de RTT, VCOM et des tampons de trace\u003c\/h2\u003e\n\u003cp\u003eSEGGER Real Time Transfer (RTT) échange des données entre la cible en fonctionnement et l'hôte via la connexion de débogage, ce qui vous permet de journaliser une application ou d'interagir avec elle sans UART libre. Si un UART est disponible, la fonction VCOM le relie à un port COM virtuel sur le PC via les broches 5 (J-Link Tx) et 17 (J-Link Rx) du connecteur 20 broches ; VCOM ne fonctionne qu'en débogage SWD. Les tampons Embedded Trace Buffer (ETB) et Micro Trace Buffer (MTB) sont pris en charge lorsque la cible les implémente.\u003c\/p\u003e\n\n\u003ch2\u003eLogiciels, IDE et possibilité de mise à niveau\u003c\/h2\u003e\n\u003cp\u003eLe logiciel J-Link et les mises à jour du firmware sont gratuits. Le logiciel de configuration et de pilotage fonctionne sous Windows (x86-64 et ARM64), Linux (x86-64 et ARM64) et macOS (x86-64 et Apple Silicon). SEGGER indique une prise en charge complète, entre autres, dans SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso et Visual Studio Code. Plusieurs J-Link peuvent fonctionner sur un même PC, chacun étant identifié par son numéro de série.\u003c\/p\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cp\u003eSonde J-Link BASE Classic, câble plat 20 broches au pas de 0,1\" (18 cm) et un câble USB. Aucun adaptateur pour les embases Cortex Debug 10 broches au pas de 0,05\" n'est fourni.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterface hôte\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB Type B\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterface cible\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20 broches, 0,1\" (2,54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaces de débogage prises en charge\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTension de l'interface cible (VIF)\u003c\/th\u003e\n\u003ctd\u003e1,2 V à 5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCourant consommé sur VTref\u003c\/th\u003e\n\u003ctd\u003eMoins de 25 µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation de la cible\u003c\/th\u003e\n\u003ctd\u003e5 V (issue de l'USB), 300 mA max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse de l'interface cible\u003c\/th\u003e\n\u003ctd\u003e15 MHz max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFréquence d'échantillonnage SWO\u003c\/th\u003e\n\u003ctd\u003e30 MHz max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003ctd\u003eJusqu'à 1 Mo\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation\u003c\/th\u003e\n\u003ctd\u003ePar USB, 50 mA max. plus le courant d'alimentation de la cible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e100 mm x 53 mm x 27 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePoids (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e70 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de fonctionnement\u003c\/th\u003e\n\u003ctd\u003e+5 °C à +60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de stockage\u003c\/th\u003e\n\u003ctd\u003e-20 °C à +65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHumidité relative\u003c\/th\u003e\n\u003ctd\u003e90 % HR max., sans condensation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCEM\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystème d'exploitation hôte\u003c\/th\u003e\n\u003ctd\u003eWindows et Linux (x86-64, ARM64) ; macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Flash et J-Flash SPI, Unlimited Flash Breakpoints, le débogueur Ozone et le pack de licence RDI ne sont pas inclus, et SEGGER classe le débogage en mode moniteur dans la mise à niveau PLUS. Ces fonctions sont fournies avec le J-Link PLUS, ou avec la licence de mise à niveau BASE vers PLUS pour un BASE existant.\u003c\/li\u003e\n  \u003cli\u003eLa vitesse de téléchargement atteint 1 Mo\/s ; SEGGER annonce jusqu'à 4 Mo\/s pour les modèles J-Link de gamme supérieure.\u003c\/li\u003e\n  \u003cli\u003ePas de trace ETM (utilisez SEGGER J-Trace) ni d'interface cible QSPI.\u003c\/li\u003e\n  \u003cli\u003eVCOM n'est disponible qu'en débogage SWD et il est désactivé à la livraison : activez-le dans J-Link Configurator ou J-Link Commander, puis coupez et rétablissez l'alimentation de la sonde.\u003c\/li\u003e\n  \u003cli\u003eUSB uniquement, sans Ethernet. Pour un montage dans un banc de test, le BASE Compact dispose de deux trous de fixation dans un boîtier carré de 46 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link BASE Classic comparé aux modèles apparentés\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModèle\u003c\/th\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003cth\u003eConnecteur hôte\u003c\/th\u003e\n\u003cth\u003eJ-Flash, Ozone, Unlimited Flash Breakpoints\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link BASE Classic (ce produit)\u003c\/td\u003e\n\u003ctd\u003e100 x 53 x 27 mm, 70 g\u003c\/td\u003e\n\u003ctd\u003eUSB Type B\u003c\/td\u003e\n\u003ctd\u003eNon inclus\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-08-00-j-link-base-classic\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-19-00-j-link-base-compact-debugger\"\u003eJ-Link BASE Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17 mm, 20 g, deux trous de fixation\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eNon inclus\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 x 53 x 27 mm, 70 g\u003c\/td\u003e\n\u003ctd\u003eUSB Type B\u003c\/td\u003e\n\u003ctd\u003eInclus\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/j-link-upgrade-base-to-plus\"\u003eJ-Link Upgrade BASE to PLUS\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLicence pour un BASE existant\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eLes ajoute\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"j-link-upgrade-base-to-plus\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eApplications types\u003c\/h2\u003e\n\u003cp\u003eTéléchargement en flash et débogage au niveau du code source de composants Cortex-M STM32, NXP LPC et Kinetis depuis STM32CubeIDE ou MCUXpresso. Journalisation RTT sur une cible sans UART libre pendant la mise au point du firmware.\u003c\/p\u003e\n\u003cp\u003eChoisissez le Classic pour le poste de travail ; pour un banc de test ou un boîtier, le Compact offre les mêmes fonctions dans un boîtier carré de 46 mm.\u003c\/p\u003e\n\n\u003cp\u003eCommandez le J-Link BASE Classic pour \u003cspan data-ds-price=\"segger-8-08-00-j-link-base-classic\"\u003e£470\u003c\/span\u003e HT. Vérifiez votre référence dans la liste des composants pris en charge par SEGGER, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSondes de débogage SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière révision le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003ePage produit SEGGER J-Link BASE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_BASE\"\u003eSEGGER Knowledge Base : J-Link BASE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003eSEGGER J-Link : tarifs et présentation des licences\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base : Using J-Link VCOM functionality\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base : Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172079839,"sku":"8.08.00","price":470.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-08-00-40212524663007.jpg?v=1689508389"},{"product_id":"segger-j-link-plus-compact-8-19-28","title":"SEGGER J-Link PLUS Compact (8.19.28)","description":"\u003cp\u003eLe SEGGER J-Link PLUS Compact (référence 8.19.28) est une sonde de débogage JTAG\/SWD alimentée par USB, dans un boîtier de 46 mm x 46 mm x 17 mm, avec une interface cible de 1,2 V à 5 V, une vitesse d'interface cible jusqu'à 15 MHz et des vitesses de téléchargement jusqu'à 1 Mo\/s. Elle offre les mêmes fonctions J-Link PLUS que le modèle de table Classic, y compris les licences J-Flash, Unlimited Flash Breakpoints, Ozone et RDI, avec un port hôte USB-C et deux trous de fixation. Elle convient aux bancs de test, aux bancs automatisés et aux postes de production qui ont besoin de débogage et de programmation flash sur des cibles ARM Cortex, RISC-V, Renesas RX et Microchip PIC32.\u003c\/p\u003e\n\n\u003ch2\u003eSonde de débogage JTAG\/SWD compacte pour bancs de test et montages\u003c\/h2\u003e\n\u003cp\u003eAvec 20 g, 46 mm de côté et deux trous de fixation, la PLUS Compact peut être intégrée dans des boîtiers d'équipements existants, des gabarits de test et des bancs automatisés. La liaison hôte est en USB 2.0 Hi-Speed via USB-C, et la sonde est alimentée par USB. Côté cible, elle utilise le connecteur J-Link standard 20 broches au pas de 0,1\" ; le brochage et les options d'adaptateurs figurent dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eBrochage du connecteur SEGGER J-Link 20 broches\u003c\/a\u003e. La sonde peut alimenter la cible en 5 V jusqu'à 300 mA à partir du rail USB.\u003c\/p\u003e\n\n\u003ch2\u003eLicences J-Link PLUS incluses sur la sonde\u003c\/h2\u003e\n\u003cp\u003eLa licence J-Flash est préinstallée sur la sonde, il n'y a donc rien à activer. J-Flash programme la flash interne et externe sans IDE. Unlimited Flash Breakpoints vous permet de placer des points d'arrêt en flash au-delà du nombre de points d'arrêt matériels du cœur. Ozone, le débogueur autonome de SEGGER, et la licence RDI complètent l'ensemble. Le débogage en mode moniteur est pris en charge sur les cœurs ARMv7-M et ARMv8-M.\u003c\/p\u003e\n\n\u003ch2\u003eCœurs pris en charge, RTT et VCOM\u003c\/h2\u003e\n\u003cp\u003eLes interfaces de débogage prises en charge sont JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE et Silicon Labs C2. La liste des cœurs pris en charge par J-Link PLUS selon SEGGER couvre ARM Cortex-M0 à Cortex-M85, Cortex-A et Cortex-R, les anciens ARM7 à ARM11, les cœurs RISC-V de SiFive, Andes, Codasip et Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 et Cadence Tensilica Xtensa. Real Time Transfer (RTT) échange des données entre la cible en fonctionnement et l'hôte via la liaison de débogage. Lorsqu'un UART est disponible, VCOM le relie à un port COM virtuel par les broches 5 (J-Link Tx) et 17 (J-Link Rx) du connecteur 20 broches, lors d'un débogage en SWD.\u003c\/p\u003e\n\n\u003ch2\u003eLogiciels et compatibilité IDE\u003c\/h2\u003e\n\u003cp\u003eLe logiciel J-Link est gratuit. Il fonctionne sous Windows (x86-64 et ARM64), Linux (x86-64 et ARM64) et macOS (x86-64 et Apple Silicon). SEGGER indique notamment la prise en charge dans SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso et Visual Studio Code.\u003c\/p\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cp\u003eSonde J-Link PLUS Compact, câble plat 20 broches au pas de 0,1\" et un câble USB-C.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterface hôte\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnecteur cible\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20 broches, 0,1\" (2,54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaces de débogage prises en charge\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTension d'interface cible (VIF)\u003c\/th\u003e\n\u003ctd\u003e1,2 V à 5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCourant consommé sur VTref\u003c\/th\u003e\n\u003ctd\u003eMoins de 25 µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation de la cible\u003c\/th\u003e\n\u003ctd\u003e5 V (issu de l'USB), max. 300 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse d'interface cible\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFréquence d'échantillonnage SWO\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003ctd\u003eJusqu'à 1 Mo\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation\u003c\/th\u003e\n\u003ctd\u003ePar USB, max. 50 mA plus le courant d'alimentation de la cible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLicences incluses\u003c\/th\u003e\n\u003ctd\u003eJ-Flash (préinstallée), Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e46 mm x 46 mm x 17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePoids (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e20 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de fonctionnement\u003c\/th\u003e\n\u003ctd\u003e+5 °C à +60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de stockage\u003c\/th\u003e\n\u003ctd\u003e-20 °C à +65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHumidité relative\u003c\/th\u003e\n\u003ctd\u003eMax. 90 % HR, sans condensation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCEM\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystème d'exploitation hôte\u003c\/th\u003e\n\u003ctd\u003eWindows et Linux (x86-64, ARM64) ; macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUSB uniquement. Pour un accès Ethernet, choisissez la J-Link PRO, ou la J-Link PRO PoE pour le Power over Ethernet.\u003c\/li\u003e\n  \u003cli\u003eLa vitesse de téléchargement atteint 1 Mo\/s et la vitesse d'interface cible 15 MHz ; les modèles J-Link ULTRA+ et PRO atteignent jusqu'à 4 Mo\/s et 50 MHz.\u003c\/li\u003e\n  \u003cli\u003ePas de trace ETM sur Cortex-M (utilisez SEGGER J-Trace) et pas d'interface cible QSPI.\u003c\/li\u003e\n  \u003cli\u003eVCOM n'est disponible que lors d'un débogage en SWD.\u003c\/li\u003e\n  \u003cli\u003eSi vous n'avez besoin que du débogage sans les licences, la \u003ca href=\"\/fr\/products\/segger-8-19-00-j-link-base-compact-debugger\"\u003eJ-Link BASE Compact\u003c\/a\u003e partage le même boîtier et les mêmes caractéristiques matérielles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link PLUS Compact comparée aux modèles proches\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModèle\u003c\/th\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003cth\u003eConnecteur hôte\u003c\/th\u003e\n\u003cth\u003eVitesse de téléchargement\u003c\/th\u003e\n\u003cth\u003eJ-Flash, Ozone, Unlimited Flash Breakpoints\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link PLUS Compact (ce produit)\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17 mm, 20 g, deux trous de fixation\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 1 Mo\/s\u003c\/td\u003e\n\u003ctd\u003eInclus\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-plus-compact-8-19-28\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 x 53 x 27 mm, 70 g\u003c\/td\u003e\n\u003ctd\u003eUSB type B\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 1 Mo\/s\u003c\/td\u003e\n\u003ctd\u003eInclus\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-19-00-j-link-base-compact-debugger\"\u003eJ-Link BASE Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17 mm, 20 g, deux trous de fixation\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 1 Mo\/s\u003c\/td\u003e\n\u003ctd\u003eNon inclus\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-link-ultra-plus-8-16-28\"\u003eJ-Link ULTRA+ (J-Link Ultra)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e72 x 45 x 18 mm, 40 g\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eJusqu'à 4 Mo\/s\u003c\/td\u003e\n\u003ctd\u003eInclus\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-ultra-plus-8-16-28\"\u003e£870\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eApplications typiques\u003c\/h2\u003e\n\u003cp\u003eUne sonde fixée dans un gabarit de test, qui programme des cartes STM32 ou NXP Kinetis avec J-Flash en fin de ligne pilote. Débogage au niveau source de code Cortex-M exécuté depuis la flash, avec plus de points d'arrêt que n'en offre le FPB du Cortex-M, sur un banc où la sonde reste montée.\u003c\/p\u003e\n\u003cp\u003eChoisissez la Compact pour un banc de test ou un boîtier ; pour le poste de travail, la PLUS Classic offre les mêmes fonctions dans un boîtier plus grand.\u003c\/p\u003e\n\n\u003cp\u003eCommandez la J-Link PLUS Compact pour \u003cspan data-ds-price=\"segger-j-link-plus-compact-8-19-28\"\u003e£660\u003c\/span\u003e HT. Vérifiez votre référence de composant dans la liste des composants pris en charge par SEGGER, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSondes de débogage SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière révision le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-plus\/\"\u003ePage produit SEGGER J-Link PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_PLUS\"\u003eSEGGER Knowledge Base : J-Link PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003eTarifs et licences SEGGER J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-ultra\/\"\u003ePage produit SEGGER J-Link Ultra\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base : utilisation de la fonction VCOM de J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base : IDE pris en charge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172112607,"sku":"8.19.28","price":660.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-19-28-40212529381599.jpg?v=1689508757"},{"product_id":"segger-8-19-00-j-link-base-compact-debugger","title":"SEGGER J-Link BASE Compact Debug Probe","description":"\u003cp\u003eThe SEGGER J-Link BASE Compact (part number 8.19.00) is a USB-powered JTAG\/SWD debug probe in a 46mm x 46mm x 17mm housing, with a 1.2V to 5V target interface, up to 15 MHz target interface speed and download speeds up to 1 MB\/s. It has the same J-Link BASE feature set as the desktop Classic model, with a USB-C host port and two mounting holes so it can stay inside a test fixture or end equipment. It suits firmware bring-up on ARM Cortex, RISC-V, Renesas RX and Microchip PIC32 targets, and fixed debug or programming stations where a full-size probe will not fit.\u003c\/p\u003e\n\n\u003ch2\u003eCompact JTAG\/SWD Debug Probe Built for Fixtures\u003c\/h2\u003e\n\u003cp\u003eAt 20g and 46mm square, with two mounting holes, the Compact is built to be fixed inside equipment housings, test jigs and development systems. The host link is USB 2.0 Hi-Speed over USB-C, and the probe is USB powered. On the target side it uses the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Interfaces and Supported Cores\u003c\/h2\u003e\n\u003cp\u003eCurrent J-Link BASE hardware supports JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2. SEGGER's supported cores list covers ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, legacy ARM7 to ARM1176, RISC-V cores from SiFive, Andes, Codasip and Nuclei, Renesas RX, Microchip PIC32 and Silicon Labs EFM8. The probe can also supply the target with 5V at up to 300mA from the USB rail.\u003c\/p\u003e\n\n\u003ch2\u003eRTT, VCOM and Trace Buffer Support\u003c\/h2\u003e\n\u003cp\u003eSEGGER Real Time Transfer (RTT) moves data between the running target and the host through the debug connection, so you can log or interact with an application without a spare UART. Where a UART is available, the VCOM function bridges it to a virtual COM port on the PC using pins 5 (J-Link Tx) and 17 (J-Link Rx) of the 20-pin connector; VCOM works only when debugging over SWD. Embedded Trace Buffer (ETB) and Micro Trace Buffer (MTB) are supported where the target implements them.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and IDE Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe J-Link software and firmware updates are free. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon). SEGGER lists full support in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso and Visual Studio Code, among others. Several J-Links can run from one PC, each identified by its serial number.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eJ-Link BASE Compact probe, 20-pin 0.1\" ribbon cable and a USB-C cable. No adapter for 10-pin 0.05\" Cortex Debug headers is included.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported debug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V (derived from USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWO sampling frequency\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 50mA plus target supply current\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e46mm x 46mm x 17mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e20g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Flash and J-Flash SPI, Unlimited Flash Breakpoints, the Ozone debugger and the RDI licence pack are not included, and SEGGER lists monitor-mode debugging under the PLUS upgrade. They come with the J-Link PLUS, or with the BASE to PLUS upgrade licence for an existing BASE.\u003c\/li\u003e\n  \u003cli\u003eDownload speed is up to 1 MB\/s; SEGGER quotes up to 4 MB\/s for higher-tier J-Link models.\u003c\/li\u003e\n  \u003cli\u003eNo ETM trace (use SEGGER J-Trace) and no QSPI target interface.\u003c\/li\u003e\n  \u003cli\u003eVCOM is available only when debugging over SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link BASE Compact Compared with Related Models\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003cth\u003eHost connector\u003c\/th\u003e\n\u003cth\u003eJ-Flash, Ozone, Unlimited Flash Breakpoints\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link BASE Compact (this product)\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, 20g, two mounting holes\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-08-00-j-link-base-classic\"\u003eJ-Link BASE Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 x 53 x 27mm, 70g\u003c\/td\u003e\n\u003ctd\u003eUSB Type B\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-08-00-j-link-base-classic\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-link-plus-compact-8-19-28\"\u003eJ-Link PLUS Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, two mounting holes\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-plus-compact-8-19-28\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/j-link-upgrade-base-to-plus\"\u003eJ-Link Upgrade BASE to PLUS\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLicence for an existing BASE\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eAdds them\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"j-link-upgrade-base-to-plus\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eFlash download and source-level debug of STM32, NXP LPC and Kinetis Cortex-M parts from STM32CubeIDE or MCUXpresso. A probe fixed inside a test jig, wired to a 20-pin header, for repeat debug access to Cortex-M33 or RISC-V boards in validation. RTT logging from a target with no free UART during firmware bring-up.\u003c\/p\u003e\n\u003cp\u003eChoose the Compact for a fixture or enclosure; for the bench, the Classic carries the same feature set in a larger housing.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Link BASE Compact for \u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 30\/10\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003eSEGGER J-Link BASE product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_BASE\"\u003eSEGGER Knowledge Base: J-Link BASE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base: Using J-Link VCOM functionality\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172145375,"sku":"8.19.00","price":470.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-19-00-40212528234719.jpg?v=1689509458"},{"product_id":"segger-j-trace-pro-cortex-debugger","title":"Débogueur de traces Cortex SEGGER J-Trace PRO","description":"\u003cp\u003eThe SEGGER J-Trace PRO Cortex (part number 8.20.00) is a streaming trace probe for ARM Cortex-A, Cortex-R and Cortex-M devices, with ETM and PTM trace, a USB 3.0 SuperSpeed and Gigabit Ethernet host link, download speeds up to 4.0 MB\/s and a 1.2V to 5V target interface. It combines J-Link debugging with unlimited instruction trace, live code coverage and live code profiling. It suits firmware teams working across Cortex-A, Cortex-R and Cortex-M targets.\u003c\/p\u003e\n\n\u003ch2\u003eStreaming Trace for Cortex-A, Cortex-R and Cortex-M\u003c\/h2\u003e\n\u003cp\u003eStreaming trace sends data continuously to the PC instead of stopping when a buffer fills, so a recording can run long enough to catch a rare fault or a program that ends up stuck in a fault handler. SEGGER's Knowledge Base lists ETM, PTM and ETB trace for ARM Cortex on this model. The supported cores list covers Cortex-A5 to Cortex-A17, Cortex-A53, A55, A57, A72 and A76, Cortex-R4, R5, R8, R52 and R82, Cortex-M0 to Cortex-M85, and SC000 and SC300. RISC-V is not supported; use the J-Trace PRO or J-Trace PRO RISC-V for those targets.\u003c\/p\u003e\n\n\u003ch2\u003eDebug and Trace Connectors\u003c\/h2\u003e\n\u003cp\u003eThe probe has two target connectors: the 20-pin JTAG\/SWD connector used across the J-Link range, with a 14-pin adapter available, and a 19-pin 0.05\" JTAG\/SWD and Trace connector that carries the trace clock and four trace data lines. Targets with a 38-pin Mictor header connect through the \u003ca href=\"\/fr\/products\/segger-8-06-21-j-trace-mictor-38-adapter\"\u003eJ-Trace Mictor 38 Adapter\u003c\/a\u003e. Pin assignments for the 20-pin connector are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Supported debug interfaces are JTAG, cJTAG, SWD, SWD multi-drop and SWO, and the probe can supply 5V to the target.\u003c\/p\u003e\n\n\u003ch2\u003eFull J-Link PRO Debug Capability\u003c\/h2\u003e\n\u003cp\u003eJ-Trace PRO Cortex is also a complete J-Link. It includes the full set of J-Link PRO licences, including Unlimited Flash Breakpoints, and supports Real Time Transfer (RTT) and monitor-mode debugging on ARMv7-M and ARMv8-M. SEGGER allows Ozone, its debugger and trace analysis tool, to be used free of charge with a J-Trace PRO, including for commercial use. Ozone is SEGGER's recommended tool for trace analysis; debugging works from any J-Link compatible IDE. Software runs on Windows, Linux and macOS, including ARM64 and Apple Silicon hosts.\u003c\/p\u003e\n\u003cp\u003eThe Ethernet data lines are isolated to IEEE 802.3 (1500 Vrms for one minute). The shield is not, so SEGGER recommends an unshielded twisted pair cable where that isolation matters.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Trace PRO Cortex probe\u003c\/li\u003e\n  \u003cli\u003eCortex-M Trace Reference Board\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.05\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003eMicro USB cable\u003c\/li\u003e\n  \u003cli\u003eUSB 3.0 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 3.0 SuperSpeed; Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin (14-pin adapter available); JTAG\/SWD + Trace 19-pin 0.05\" (38-pin Mictor adapter available)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eStreaming trace; ETM, PTM and ETB (ARM Cortex)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported cores\u003c\/th\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R, Cortex-M, SC000, SC300\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 4.0 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace capacitive load\u003c\/th\u003e\n\u003ctd\u003e3 pF J-Trace plus 8 pF cable (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e123mm x 68mm x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e120g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo RISC-V support; choose the J-Trace PRO or the J-Trace PRO RISC-V.\u003c\/li\u003e\n  \u003cli\u003eTrace needs the target to implement trace hardware and bring the trace pins out to a connector; SEGGER notes that trace setup depends on the target hardware design.\u003c\/li\u003e\n  \u003cli\u003eNo VCOM and no CMSIS-DAP v1 (HID) mode.\u003c\/li\u003e\n  \u003cli\u003eMost IDEs offer little or no trace analysis; plan on Ozone for coverage and profiling.\u003c\/li\u003e\n  \u003cli\u003eThe Mictor 38 adapter is a separate purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace PRO Cortex Compared with the Other J-Trace PRO Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrace architectures\u003c\/th\u003e\n\u003cth\u003eCortex-M Trace Reference Board in box\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace PRO Cortex (this product)\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R and Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-debugger\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R, Cortex-M and RISC-V\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-trace-probe\"\u003e£3,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-trace-pro-cortex-m-8-18-00\"\u003eJ-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1,515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-22-00-j-trace-pro-risc-v\"\u003eJ-Trace PRO RISC-V\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRISC-V (RV32, RV64)\u003c\/td\u003e\n\u003ctd\u003eNot listed\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-22-00-j-trace-pro-risc-v\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003ePTM trace on a Cortex-A9, or ETM trace on a Cortex-A53, application processor to follow program flow into a crash. ETM trace on a Cortex-R5 or Cortex-R52 real-time core to measure interrupt timing over a long run. Live code coverage on a Cortex-M4 or Cortex-M33 microcontroller to show which paths a test suite exercised.\u003c\/p\u003e\n\u003cp\u003eChoose the J-Trace PRO Cortex when your targets include Cortex-A or Cortex-R cores; for Cortex-M only work, compare the J-Trace PRO Cortex-M.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Trace PRO Cortex for \u003cspan data-ds-price=\"segger-j-trace-pro-cortex-debugger\"\u003e£2,005\u003c\/span\u003e ex VAT. Check your device's trace pins, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/models\/j-trace-cortex-arm\/\"\u003eSEGGER J-Trace PRO Cortex-A\/R\/M product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Trace_PRO_Cortex\"\u003eSEGGER Knowledge Base: J-Trace PRO Cortex\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/\"\u003eSEGGER J-Trace model overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172178143,"sku":"8.20.00","price":2005.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-20-00-40235997790431.jpg?v=1689939840"},{"product_id":"segger-j-trace-pro-cortex-m-8-18-00","title":"Débogueur de traces SEGGER J-Trace PRO Cortex-M","description":"\u003ch2\u003e Présentation de SEGGER J-Trace PRO : la sonde de traçage en streaming ultime\u003c\/h2\u003e\n\n\u003cp\u003e Vous êtes un développeur embarqué à la recherche de la solution de débogage parfaite ? Ne cherchez plus ! SEGGER J-Trace est là pour répondre à tous vos besoins de débogage avec ses fonctionnalités inégalées et son expérience de traçage transparente.\u003c\/p\u003e\n\n\u003ch3\u003e Libérez la puissance du streaming illimité Trace\u003c\/h3\u003e\n\n\u003cp\u003e Avec SEGGER J-Trace, vous pouvez accéder à un suivi en continu illimité, en capturant des traces complètes sur de longues périodes. Ne passez plus à côté de ces bugs insaisissables qui apparaissent de nulle part ! Enregistrez et analysez facilement les bugs peu fréquents et difficiles à reproduire, même lorsque le flux de votre programme déraille et s'arrête dans un état d'erreur.\u003c\/p\u003e\n\n\u003ch3\u003e Couverture et profilage du code en direct à portée de main\u003c\/h3\u003e\n\n \u003cp\u003eJ-Trace PRO prend en charge des fonctionnalités étendues telles que Live Code Coverage et Live Code Profiling au-delà des sondes de trace traditionnelles. Gardez un œil sur les parties de votre code d'application qui ont été exécutées avec Live Code Coverage et obtenez des informations précieuses sur la fréquence d'exécution des instructions avec Live Code Profiling. Identifiez les points chauds dans votre code pour des opportunités d'optimisation et rationalisez votre processus de développement.\u003c\/p\u003e\n\n\u003ch3\u003e Prise en charge des microcontrôleurs basés sur Cortex-M\u003c\/h3\u003e\n\n\u003cp\u003e La variante J-Trace PRO Cortex-M offre une prise en charge transparente des microcontrôleurs basés sur Cortex-M. Son interface USB 3.0 SuperSpeed ​​permet un suivi en continu via USB avec l'horloge de suivi complète. Cette fonction de streaming en temps réel vous permet de capturer des données sur des périodes prolongées sans restrictions, vous offrant ainsi toutes les informations dont vous avez besoin pour développer et optimiser efficacement votre code.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e Profitez de l'expérience de débogage ultime ! Adoptez SEGGER J-Trace dès aujourd'hui et élevez votre processus de développement embarqué vers de nouveaux sommets !\u003c\/p\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172210911,"sku":"8.18.00","price":1515.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-18-00-40212539080927.jpg?v=1689509285"},{"product_id":"segger-8-22-00-j-trace-pro-risc-v","title":"SEGGER J-Trace PRO RISC-V Debug Probe","description":"\u003cp\u003eThe SEGGER J-Trace PRO RISC-V (part number 8.22.00) is a streaming trace probe for RV32 and RV64 RISC-V cores, using RISC-V N-Trace BTM, with a USB 3.0 SuperSpeed and Gigabit Ethernet host link, download speeds up to 4.0 MB\/s and a 1.2V to 5V target interface. It combines J-Link debugging with unlimited instruction trace, live code coverage and live code profiling. It suits firmware teams bringing up and validating RISC-V microcontrollers and SoCs that implement N-Trace.\u003c\/p\u003e\n\n\u003ch2\u003eStreaming N-Trace for RISC-V Cores\u003c\/h2\u003e\n\u003cp\u003eStreaming trace sends data continuously to the PC instead of stopping when a buffer fills, so a recording can run long enough to catch a rare fault or a program that ends up stuck in a fault handler. SEGGER's Knowledge Base lists N-Trace BTM for RISC-V and supported cores of RV32 and RV64 on this model. Devices without a SEGGER trace reference must implement the RISC-V trace components that SEGGER describes in its N-Trace documentation.\u003c\/p\u003e\n\n\u003ch2\u003eDebug and Trace Connectors\u003c\/h2\u003e\n\u003cp\u003eThe probe has two target connectors: the 20-pin JTAG\/SWD connector used across the J-Link range, with a 14-pin adapter available, and a 19-pin 0.05\" JTAG\/SWD and Trace connector that carries the trace clock and four trace data lines. Pin assignments for the 20-pin connector are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. SEGGER's feature table for this model lists JTAG, cJTAG and SWD debug interfaces, and the probe can supply 5V to the target.\u003c\/p\u003e\n\n\u003ch2\u003eFull J-Link PRO Debug Capability\u003c\/h2\u003e\n\u003cp\u003eJ-Trace PRO RISC-V is also a full J-Link debug probe for RISC-V. It includes the full set of J-Link PRO licences, including Unlimited Flash Breakpoints. SEGGER allows Ozone, its debugger and trace analysis tool, to be used free of charge with a J-Trace PRO, including for commercial use. Ozone is SEGGER's recommended tool for trace analysis; debugging works from any J-Link compatible IDE. Software runs on Windows, Linux and macOS, including ARM64 and Apple Silicon hosts.\u003c\/p\u003e\n\u003cp\u003eThe Ethernet data lines are isolated to IEEE 802.3 (1500 Vrms for one minute). The shield is not, so SEGGER recommends an unshielded twisted pair cable where that isolation matters.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Trace PRO RISC-V probe\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.05\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003eUSB 3.0 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 3.0 SuperSpeed; Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin (14-pin adapter available); JTAG\/SWD + Trace 19-pin 0.05\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eStreaming trace; N-Trace BTM (RISC-V)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported cores\u003c\/th\u003e\n\u003ctd\u003eRISC-V RV32, RV64\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 4.0 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace capacitive load\u003c\/th\u003e\n\u003ctd\u003e3 pF J-Trace plus 8 pF cable (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e123mm x 68mm x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e120g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRISC-V only. SEGGER's feature table for this model lists no ARM ETM, PTM or ETB trace, no SWO and no ARM monitor-mode debugging; for ARM and RISC-V in one probe, choose the J-Trace PRO.\u003c\/li\u003e\n  \u003cli\u003eNo SWD multi-drop, VCOM or CMSIS-DAP v1 (HID) mode.\u003c\/li\u003e\n  \u003cli\u003eTrace needs the target to implement N-Trace and bring the trace pins out to a connector; SEGGER notes that trace setup depends on the target hardware design.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's package list for this model does not include the Cortex-M Trace Reference Board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace PRO RISC-V Compared with the Other J-Trace PRO Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrace architectures\u003c\/th\u003e\n\u003cth\u003eCortex-M Trace Reference Board in box\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace PRO RISC-V (this product)\u003c\/td\u003e\n\u003ctd\u003eRISC-V (RV32, RV64)\u003c\/td\u003e\n\u003ctd\u003eNot listed\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-22-00-j-trace-pro-risc-v\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R, Cortex-M and RISC-V\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-trace-probe\"\u003e£3,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-trace-pro-cortex-debugger\"\u003eJ-Trace PRO Cortex\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R and Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-debugger\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-trace-pro-cortex-m-8-18-00\"\u003eJ-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1,515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eInstruction trace on an RV32 microcontroller to find the code path that leads to an intermittent exception. Live code coverage on an RV64 core to show which paths a test suite exercised before release. Trace on a SiFive core bitstream on an ARTY board, connected through the \u003ca href=\"\/fr\/products\/segger-8-06-35-sifive-arty-trace-adapter\"\u003eSiFive-ARTY Trace Adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eChoose the J-Trace PRO RISC-V when all your trace targets are RISC-V.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Trace PRO RISC-V for \u003cspan data-ds-price=\"segger-8-22-00-j-trace-pro-risc-v\"\u003e£2,005\u003c\/span\u003e ex VAT. Check that your device implements N-Trace with the trace pins connected, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/models\/j-trace-pro-risc-v\/\"\u003eSEGGER J-Trace PRO RISC-V product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Trace_PRO_RISC-V\"\u003eSEGGER Knowledge Base: J-Trace PRO RISC-V\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/RISC-V_N-Trace\"\u003eSEGGER Knowledge Base: RISC-V N-Trace\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172243679,"sku":"8.22.00","price":2005.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-22-00-40212577452255.jpg?v=1689939145"},{"product_id":"segger-8-06-29-5v-target-supply-adapter","title":"Adaptateur d'alimentation cible SEGGER 5V","description":"\u003ch2\u003e Présentation de l'adaptateur d'alimentation cible 5 V\u003c\/h2\u003e\n\n \u003cp\u003eVous avez besoin d'une tension d'alimentation fiable pour votre carte cible ? Ne cherchez plus ! Notre adaptateur d'alimentation cible 5 V de pointe est là pour alimenter vos projets et leur donner vie.\u003c\/p\u003e\n\n\u003ch3\u003e Efficace et pratique\u003c\/h3\u003e\n\n\u003cp\u003e L'adaptateur d'alimentation cible 5 V fournit sans effort une tension d'alimentation stable de 5 V à votre carte cible, garantissant des performances et une stabilité optimales. Son intégration transparente permet une insertion directe entre le Flasher ou le J-Link et le câble de débogage, maintenant une connexion 1:1 de tous les signaux de débogage. Dites adieu aux problèmes de compatibilité et profitez d'une expérience sans tracas !\u003c\/p\u003e\n\n\u003ch3\u003e Précision inégalée\u003c\/h3\u003e\n\n\u003cp\u003e La broche 19 du câble de débogage devient la passerelle pour fournir la tension d'alimentation à votre cible. Avec une tension fixe de 5 V, vous pouvez faire confiance à l'alimentation constante et précise de notre adaptateur. Ne vous inquiétez plus des fluctuations de tension - il est temps de vous concentrer sur ce qui compte : la réussite de votre projet !\u003c\/p\u003e\n\n \u003cp\u003eNe laissez pas les problèmes liés à l'alimentation électrique vous freiner. Adoptez l'adaptateur d'alimentation cible 5 V et constatez la différence qu'il peut faire dans vos efforts de débogage et de développement.\u003cbr\u003e\u003c\/p\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172276447,"sku":"8.06.29","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-29-40212885799135.jpg?v=1689520085"},{"product_id":"segger-8-06-11-2mm-adapter","title":"Adaptateur SEGGER 2 mm","description":"\u003cp\u003eL'adaptateur SEGGER 2 mm (référence 8.06.11) adapte le connecteur standard 20 broches au pas de 0,1\" du J-Link à un connecteur 20 broches au pas de 2 mm. Il s'agit d'un adaptateur 1:1 : selon SEGGER, le brochage du connecteur au pas de 2 mm est identique à celui du connecteur 20 broches standard, chaque signal reste donc sur le même numéro de broche. Il est destiné aux cartes cibles équipées d'un connecteur de débogage 20 broches au pas de 2 mm, sur lequel la nappe 0,1\" du J-Link ne s'enfiche pas.\u003c\/p\u003e\n\n\u003ch2\u003eMême brochage J-Link 20 broches sur un connecteur au pas de 2 mm\u003c\/h2\u003e\n\u003cp\u003eL'adaptateur se branche sur le connecteur standard 20 broches au pas de 0,1\" présent sur la plupart des modèles J-Link. La correspondance étant 1:1, une cible conçue selon l'affectation J-Link 20 broches ne nécessite aucun recâblage lorsque le connecteur est au pas de 2 mm, et les liaisons JTAG et SWD fonctionnent exactement comme sur un connecteur 0,1\". Les affectations des broches et les options d'adaptateurs figurent dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eBrochage du connecteur 20 broches SEGGER J-Link\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eModèles J-Link et Flasher compatibles\u003c\/h2\u003e\n\u003cp\u003eSEGGER indique que l'adaptateur 2 mm convient aux Flasher Pro, Flasher Pro XL, Flasher Compact et Flasher Portable PLUS, ainsi qu'aux J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic et Compact, et J-Link BASE Classic et Compact.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCôté sonde\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20 broches, 0,1\" (2,54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCôté cible\u003c\/th\u003e\n\u003ctd\u003e20 broches, pas de 2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCorrespondance des broches\u003c\/th\u003e\n\u003ctd\u003e1:1, brochage identique au connecteur 20 broches standard\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRéférence\u003c\/th\u003e\n\u003ctd\u003e8.06.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cp\u003eSEGGER ne publie pas de liste de colisage pour cet adaptateur ; la commande porte sur l'adaptateur 2 mm lui-même.\u003c\/p\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePas de réaffectation des broches. Pour une cible au brochage non standard, le 50-Mil 10-Pin Patch Adapter permet un câblage personnalisé.\u003c\/li\u003e\n  \u003cli\u003eIl ne convient pas aux connecteurs Cortex-M au pas de 0,05\" ; utilisez le 9-Pin ou le 19-Pin Cortex-M Adapter.\u003c\/li\u003e\n  \u003cli\u003eLe connecteur JTAG Xilinx 14 broches au pas de 2 mm nécessite le Xilinx Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER ne publie ni les dimensions ni le genre (mâle ou femelle) du connecteur côté 2 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eL'adaptateur 2 mm comparé aux adaptateurs similaires\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdaptateur\u003c\/th\u003e\n\u003cth\u003eConnecteur cible\u003c\/th\u003e\n\u003cth\u003eCorrespondance des broches\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdaptateur 2 mm (ce produit)\u003c\/td\u003e\n\u003ctd\u003e20 broches, pas de 2 mm\u003c\/td\u003e\n\u003ctd\u003e1:1 avec J-Link 20 broches\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-11-2mm-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-19-xilinx-adapter\"\u003eXilinx Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14 broches, JTAG Xilinx 2 mm\u003c\/td\u003e\n\u003ctd\u003eJTAG Xilinx\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-9-pin-cortex-m-adapter-8-06-02\"\u003e9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e9 broches, 0,05\" Samtec FTSH\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 broches, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eCâblage personnalisé possible\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eCommandez l'adaptateur 2 mm pour \u003cspan data-ds-price=\"segger-8-06-11-2mm-adapter\"\u003e£60\u003c\/span\u003e HT, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003esondes de débogage SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière révision le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/2mm-adapter\/\"\u003ePage produit SEGGER 2mm Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/2mm-adapter\"\u003eBoutique SEGGER : 2mm Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eBase de connaissances SEGGER : connecteur J-Link 20 broches\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/xilinx-adapter\/\"\u003ePage produit SEGGER Xilinx Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eVue d'ensemble des adaptateurs SEGGER J-Link\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172309215,"sku":"8.06.11","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-11-40212741292255.jpg?v=1689515939"},{"product_id":"segger-j-link-6-pin-needle-adapter-8-06-16","title":"Adaptateur à aiguilles 6 broches SEGGER J-Link (8.06.16)","description":"\u003cp\u003eLe 6-Pin Needle Adapter de SEGGER (référence 8.06.16) relie un J-Link ou un Flasher à un PCB dépourvu de connecteur correspondant ou d'embase de programmation, en adaptant le connecteur standard 20 broches au pas de 0,1\" à un motif de 6 aiguilles au pas de 0,05\". Des pointes à ressort se posent sur des pastilles de l'empreinte de la cible, et trois broches de positionnement empêchent de monter l'adaptateur à l'envers. C'est le plus petit des deux adaptateurs à aiguilles de SEGGER, destiné à la programmation et au débogage SWD sur les cartes où même l'empreinte à 10 aiguilles prend trop de place.\u003c\/p\u003e\n\n\u003ch2\u003eAccès SWD sans connecteur sur le PCB\u003c\/h2\u003e\n\u003cp\u003eAucun connecteur supplémentaire n'est nécessaire sur la cible, seulement l'empreinte 6 broches, plus petite selon SEGGER que celle du 10-Pin Needle Adapter. Les six aiguilles transportent VTref, SWDIO, nRESET, SWCLK, GND et SWO (broches 1 à 6 sur le schéma de brochage de SEGGER). L'adaptateur dispose de pointes à ressort haute fiabilité pour un contact sûr, de trois broches de positionnement et, de chaque côté, de deux pieds de support que l'on peut couper si la place manque. Dessinez les pastilles selon le \u003ca href=\"\/fr\/pages\/resources\/segger-j-link-6-pin-needle-cable-drawing\"\u003eplan d'empreinte 6 broches\u003c\/a\u003e de SEGGER et ses consignes de routage : pas de pâte à braser sur les pastilles de contact, et aucune autre piste à moins de 0,02\" d'une pastille.\u003c\/p\u003e\n\n\u003ch2\u003eModèles J-Link et Flasher compatibles\u003c\/h2\u003e\n\u003cp\u003eCôté sonde, on trouve le connecteur J-Link standard 20 broches au pas de 0,1\" présent sur la plupart des modèles J-Link. SEGGER indique que le 6-Pin Needle Adapter convient aux Flasher Pro, Flasher Pro XL, Flasher Compact et Flasher Portable PLUS, ainsi qu'aux J-Link Pro PoE, J-Link Pro, J-Link WiFi, J-Link PLUS Compact et J-Link BASE Compact. Les affectations des broches et les options d'adaptateurs figurent dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003ebrochage du connecteur 20 broches SEGGER J-Link\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCôté sonde\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20 broches, 0,1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCôté cible\u003c\/th\u003e\n\u003ctd\u003eMotif 6 aiguilles, 0,05\" (aucun connecteur monté)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignaux (broche)\u003c\/th\u003e\n\u003ctd\u003eVTref (1), SWDIO (2), nRESET (3), SWCLK (4), GND (5), SWO (6)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eContacts\u003c\/th\u003e\n\u003ctd\u003ePointes à ressort haute fiabilité\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePositionnement\u003c\/th\u003e\n\u003ctd\u003e3 broches de positionnement ; 2 pieds de support de chaque côté (sécables)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEmpreinte\u003c\/th\u003e\n\u003ctd\u003eEmpreinte SEGGER 6 aiguilles, pas des pastilles 0,05\" ; le plan de SEGGER mentionne la référence Tag-Connect TC2030-IDC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRéférence\u003c\/th\u003e\n\u003ctd\u003e8.06.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cp\u003eUn 6-Pin Needle Adapter et un câble 6 broches avec broches et pattes. Aucun J-Link ni Flasher n'est fourni.\u003c\/p\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePas de JTAG. Selon SEGGER, 6 broches ne suffisent pas pour le JTAG ; SEGGER oriente plutôt vers le 10-Pin Needle Adapter.\u003c\/li\u003e\n  \u003cli\u003ePas de broche d'alimentation de la cible. Le 10-Pin Needle Adapter ajoute une broche 5V-Supply, qui permet d'alimenter la cible depuis le J-Link ou le Flasher.\u003c\/li\u003e\n  \u003cli\u003eLe PCB cible doit comporter l'empreinte 6 aiguilles de SEGGER.\u003c\/li\u003e\n  \u003cli\u003eLa liste des produits compatibles établie par SEGGER pour cet adaptateur ne comprend ni le J-Link Ultra ni les modèles Classic, bien qu'ils aient le même connecteur 20 broches. Consultez-nous avant de commander pour l'un de ces modèles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLe 6-Pin Needle Adapter comparé aux adaptateurs apparentés\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdaptateur\u003c\/th\u003e\n\u003cth\u003eCôté cible\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e6-Pin Needle Adapter (ce produit)\u003c\/td\u003e\n\u003ctd\u003eMotif 6 aiguilles, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eSWD avec SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-6-pin-needle-adapter-8-06-16\"\u003e£110\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-04-10-pin-needle-adapter\"\u003e10-Pin Needle Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMotif 10 aiguilles, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eSignaux JTAG et SWD, alimentation de la cible en option\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-04-10-pin-needle-adapter\"\u003e£114\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-9-pin-cortex-m-adapter-8-06-02\"\u003e9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eEmbase Samtec FTSH 9 broches, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eCommandez le 6-Pin Needle Adapter pour \u003cspan data-ds-price=\"segger-j-link-6-pin-needle-adapter-8-06-16\"\u003e£110\u003c\/span\u003e HT, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003esondes de débogage SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière révision le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/6-pin-needle-adapter\/\"\u003ePage produit SEGGER 6-Pin Needle Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/6-pin-needle-adapter\"\u003eBoutique SEGGER : 6-Pin Needle Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/10-pin-needle-adapter\/\"\u003ePage produit SEGGER 10-Pin Needle Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base : 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172341983,"sku":"8.06.16","price":110.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-16-40213023555807.jpg?v=1689526381"},{"product_id":"segger-8-06-03-14-pin-ti-adapter","title":"Adaptateur TI 14 broches SEGGER avec câble","description":"\u003cp\u003eThe SEGGER 14-Pin TI Adapter (part number 8.06.03) connects a J-Link or Flasher to target hardware with a TI MCU and the 14-pin JTAG connector defined by TI, adapting the 20-pin 0.1\" connector to a 14-pin 0.1\" JTAG connector. SEGGER gives the BeagleBoard with an OMAP3530 as an example target, and its Knowledge Base page for the TI AM3517 says the probe can be connected using this adapter. SEGGER's shop lists it with a 14-pin cable.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link JTAG on TI 14-Pin Boards\u003c\/h2\u003e\n\u003cp\u003eThe adapter takes the standard J-Link 20-pin 0.1\" connector found on most J-Link models and routes JTAG to the TI layout. SEGGER's schematic shows VTref, TRST, TDI, TMS, TCK, RTCK and TDO, with connection points for EMU0 and EMU1. That lets a J-Link that already serves Cortex-M work on your bench also debug TI application processors on evaluation boards, without a second probe. Pin assignments and adapter options are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the 14-Pin TI Adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eTI 14-pin JTAG, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals (SEGGER schematic)\u003c\/th\u003e\n\u003ctd\u003eVTref, TRST, TDI, TMS, TCK, RTCK, TDO; EMU0 and EMU1 connection points\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExample targets\u003c\/th\u003e\n\u003ctd\u003eBeagleBoard (OMAP3530); TI AM3517\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e14-Pin TI Adapter\u003c\/li\u003e\n  \u003cli\u003e14-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs listed in SEGGER's shop (\"incl. 14-pin cable\").\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJTAG only; SEGGER's schematic shows no SWD signals for this adapter.\u003c\/li\u003e\n  \u003cli\u003eIt fits the TI 14-pin 0.1\" connector only. Boards with the TI CTI-20 connector need the TI-CTI-20 Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no electrical or mechanical specification for the adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e14-Pin TI Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eTypical targets\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e14-Pin TI Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eTI 14-pin JTAG, 0.1\"\u003c\/td\u003e\n\u003ctd\u003eTI MCUs, e.g. BeagleBoard with OMAP3530\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-03-14-pin-ti-adapter\"\u003e£62\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-06-ti-cti-20-adapter\"\u003eTI-CTI-20 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTI CTI-20\u003c\/td\u003e\n\u003ctd\u003eTI eval boards with CTI-20, e.g. AM335x EVM\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-06-ti-cti-20-adapter\"\u003e£78\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-39-stdc-14-adapter-uk\"\u003eSTDC 14 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin, 0.05\" defined by ST\u003c\/td\u003e\n\u003ctd\u003eST targets\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-39-stdc-14-adapter-uk\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-19-xilinx-adapter\"\u003eXilinx Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin, 2mm Xilinx JTAG\u003c\/td\u003e\n\u003ctd\u003eCortex-A9 in Zynq devices\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the 14-Pin TI Adapter for \u003cspan data-ds-price=\"segger-8-06-03-14-pin-ti-adapter\"\u003e£62\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/14-pin-ti-adapter\/\"\u003eSEGGER 14-Pin TI Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/14-pin-ti-adapter\"\u003eSEGGER shop: 14-Pin TI Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/TI_AM3517\"\u003eSEGGER Knowledge Base: TI AM3517\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/ti-cti-20-adapter\/\"\u003eSEGGER TI-CTI-20 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/stdc14-adapter\/\"\u003eSEGGER STDC14 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/xilinx-adapter\/\"\u003eSEGGER Xilinx Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172374751,"sku":"8.06.03","price":62.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-03-40215942758623.jpg?v=1689588121"},{"product_id":"segger-9-pin-cortex-m-adapter-8-06-02","title":"SEGGER 9-Pin Cortex-M Adapter (réf. 8.06.02)","description":"\u003cp\u003eLe SEGGER 9-Pin Cortex-M Adapter (référence 8.06.02) relie une sonde J-Link ou un Flasher à un matériel cible Cortex-M pour le JTAG, le SWD et le SWO. Il adapte le connecteur JTAG 20 broches au pas de 0,1\" au connecteur Samtec FTSH 9 broches au pas de 0,05\" défini par ARM. TRST n'est pas connecté par défaut ; le pont de soudure NR1 le relie à la broche 9 lorsqu'une cible en a besoin. La boutique SEGGER propose l'adaptateur avec un câble 9 broches, et il convient aussi aux cibles non Cortex-M qui utilisent le même brochage.\u003c\/p\u003e\n\n\u003ch2\u003eDéboguer des embases Cortex-M au pas fin depuis un J-Link 20 broches\u003c\/h2\u003e\n\u003cp\u003eCertaines cartes Cortex-M ne disposent que de l'embase de debug 9 broches au pas de 0,05\". Cet adaptateur permet au connecteur J-Link standard 20 broches au pas de 0,1\", présent sur la plupart des modèles J-Link, d'y accéder, en transportant le JTAG, le SWD et la sortie SWO sur le même connecteur. Le brochage et les options d'adaptateur figurent dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eBrochage du connecteur 20 broches SEGGER J-Link\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eBrochage du connecteur 9 broches\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBroche\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eRemarques\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVTref\u003c\/td\u003e\n\u003ctd\u003eTension de référence de la cible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO \/ TMS\u003c\/td\u003e\n\u003ctd\u003eDonnées SWD ou TMS JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e3, 5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eMasse\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK \/ TCK\u003c\/td\u003e\n\u003ctd\u003eHorloge SWD ou TCK JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO \/ TDO\u003c\/td\u003e\n\u003ctd\u003eSWO (facultatif en SWD) ou TDO JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003esans objet\u003c\/td\u003e\n\u003ctd\u003eAbsente sur ce connecteur\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eNC \/ TDI\u003c\/td\u003e\n\u003ctd\u003eNon utilisée en SWD ; TDI JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eNC (TRST)\u003c\/td\u003e\n\u003ctd\u003eReliée à TRST uniquement si NR1 est fermé\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003ctd\u003eReset de la cible, actif à l'état bas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCaractéristiques techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnexions prises en charge\u003c\/th\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCôté sonde\u003c\/th\u003e\n\u003ctd\u003eJTAG 20 broches, 0,1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCôté cible\u003c\/th\u003e\n\u003ctd\u003eSamtec FTSH 9 broches, 0,05\", tel que défini par ARM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTRST\u003c\/th\u003e\n\u003ctd\u003eNon connecté par défaut ; le pont de soudure NR1 le relie à la broche 9\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSondes compatibles\u003c\/th\u003e\n\u003ctd\u003eFlasher Pro, Pro XL, Compact, Portable PLUS ; J-Link Pro PoE, Pro, WiFi, PLUS Compact, BASE Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRéférence\u003c\/th\u003e\n\u003ctd\u003e8.06.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e9-Pin Cortex-M Adapter\u003c\/li\u003e\n  \u003cli\u003eCâble 9 broches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelon la fiche de la boutique SEGGER (\"incl. 9-pin cable\").\u003c\/p\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePas de trace au-delà du SWO. Pour la trace ETM Cortex-M, le connecteur 19 broches d'un J-Trace PRO est nécessaire.\u003c\/li\u003e\n  \u003cli\u003eL'alimentation 5 V de la cible par le J-Link n'est pas disponible sur le connecteur 9 broches ; SEGGER précise que cette fonction n'est pas prise en charge.\u003c\/li\u003e\n  \u003cli\u003eTRST nécessite la fermeture du pont de soudure NR1.\u003c\/li\u003e\n  \u003cli\u003eLa liste SEGGER des produits compatibles avec cet adaptateur ne comprend ni le J-Link Ultra ni les modèles Classic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLe 9-Pin Cortex-M Adapter comparé aux adaptateurs apparentés\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdaptateur\u003c\/th\u003e\n\u003cth\u003eConnecteur cible\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e9-Pin Cortex-M Adapter (ce produit)\u003c\/td\u003e\n\u003ctd\u003eSamtec FTSH 9 broches, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-00-19-pin-cortex-m-adapter\"\u003e19-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSamtec FTSH 19 broches, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-00-19-pin-cortex-m-adapter\"\u003e£38\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eCortex-M 10 broches, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eCâblage libre pour brochages non standard\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-04-10-pin-needle-adapter\"\u003e10-Pin Needle Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMotif d'aiguilles 10 broches, sans embase\u003c\/td\u003e\n\u003ctd\u003eSignaux JTAG et SWD\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-04-10-pin-needle-adapter\"\u003e£114\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eCommandez le 9-Pin Cortex-M Adapter pour \u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e HT, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSondes de debug SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière révision le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/9-pin-cortex-m-adapter\/\"\u003ePage produit SEGGER 9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/9-pin-cortex-m-adapter\"\u003eBoutique SEGGER : 9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/9-pin_JTAG\/SWD_connector\"\u003eBase de connaissances SEGGER : 9-pin JTAG\/SWD connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eBase de connaissances SEGGER : 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08001_J-Link_\/_J-Trace_User_Guide\"\u003eBase de connaissances SEGGER : J-Link \/ J-Trace User Guide (UM08001)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Debug_Connectors\"\u003eBase de connaissances SEGGER : Debug Connectors\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172440287,"sku":"8.06.02","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-02-40212738736351.jpg?v=1689515228"},{"product_id":"segger-8-06-04-10-pin-needle-adapter","title":"SEGGER 10-Pin Needle Adapter pour debug et programmation J-Link","description":"\u003cp\u003eLe SEGGER 10-Pin Needle Adapter (référence 8.06.04) relie une sonde J-Link ou un Flasher à un circuit imprimé dépourvu de connecteur correspondant ou d'embase de programmation. Il adapte le connecteur standard 20 broches au pas de 0,1\" à un motif d'aiguilles TAG-Connect 10 broches au pas de 0,05\". Des pointes à ressort viennent en contact avec les pastilles de l'empreinte cible et trois broches de positionnement empêchent tout mauvais branchement ; l'adaptateur peut en outre alimenter la cible depuis le J-Link ou le Flasher. Il convient à la mise en route du firmware et à la programmation en production sur des cartes où une embase de debug coûterait de la place et des composants.\u003c\/p\u003e\n\n\u003ch2\u003eJTAG et SWD sur une empreinte sans embase\u003c\/h2\u003e\n\u003cp\u003eAucun connecteur supplémentaire n'est nécessaire sur le circuit imprimé, et l'empreinte est très compacte. Le schéma SEGGER désigne les signaux des aiguilles VTref, TRST, SWCLK\/TCK, SWDIO\/TMS, SWO\/TDO, TDI, RTCK, RESET et VSUPPLY : l'adaptateur transporte donc aussi bien le JTAG que le SWD, et SEGGER oriente les utilisateurs JTAG vers cet adaptateur plutôt que vers la version 6 broches. Des pointes à ressort haute fiabilité assurent une connexion sûre, et deux pattes de maintien de chaque côté stabilisent l'adaptateur ; elles peuvent être coupées si la place manque. Dessinez les pastilles selon la spécification d'empreinte et les règles de routage PCB de SEGGER.\u003c\/p\u003e\n\n\u003ch2\u003eAlimentation de la cible par la sonde\u003c\/h2\u003e\n\u003cp\u003eAucune alimentation externe n'est nécessaire : l'adaptateur peut, en option, alimenter le matériel cible via le J-Link ou le Flasher. Côté sonde, on trouve le connecteur J-Link standard 20 broches au pas de 0,1\" présent sur la plupart des modèles J-Link. Le brochage et les options d'adaptateur figurent dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eBrochage du connecteur 20 broches SEGGER J-Link\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSEGGER indique que l'adaptateur convient aux Flasher Pro, Flasher Pro XL, Flasher Compact et Flasher Portable PLUS, ainsi qu'aux J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic et Compact, et J-Link BASE Classic et Compact.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCôté sonde\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20 broches, 0,1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCôté cible\u003c\/th\u003e\n\u003ctd\u003eMotif d'aiguilles TAG-Connect 10 broches, 0,05\" (aucun connecteur monté)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignaux (schéma SEGGER)\u003c\/th\u003e\n\u003ctd\u003eVTref, TRST, SWCLK\/TCK, SWDIO\/TMS, SWO\/TDO, TDI, RTCK, RESET, VSUPPLY\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation de la cible\u003c\/th\u003e\n\u003ctd\u003eEn option, via J-Link ou Flasher\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eContacts\u003c\/th\u003e\n\u003ctd\u003ePointes à ressort haute fiabilité\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePositionnement\u003c\/th\u003e\n\u003ctd\u003e3 broches de positionnement ; 2 pattes de maintien de chaque côté (sécables)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRéférence\u003c\/th\u003e\n\u003ctd\u003e8.06.04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cp\u003eSEGGER ne publie pas de liste de colisage pour cet adaptateur ; la commande porte sur le 10-Pin Needle Adapter lui-même.\u003c\/p\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLe circuit imprimé cible doit comporter l'empreinte à aiguilles 10 broches de SEGGER.\u003c\/li\u003e\n  \u003cli\u003eL'empreinte est plus grande que celle de la version à aiguilles 6 broches ; pour du SWD seul sur les cartes les plus denses, le 6-Pin Needle Adapter est plus petit.\u003c\/li\u003e\n  \u003cli\u003eSEGGER ne publie ni nombre de cycles de connexion ni valeur de courant pour l'adaptateur.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLe 10-Pin Needle Adapter comparé aux adaptateurs apparentés\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdaptateur\u003c\/th\u003e\n\u003cth\u003eCôté cible\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e10-Pin Needle Adapter (ce produit)\u003c\/td\u003e\n\u003ctd\u003eMotif d'aiguilles 10 broches, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eSignaux JTAG et SWD, alimentation de la cible en option\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-04-10-pin-needle-adapter\"\u003e£114\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-j-link-6-pin-needle-adapter-8-06-16\"\u003e6-Pin Needle Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMotif d'aiguilles 6 broches, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eSWD avec SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-6-pin-needle-adapter-8-06-16\"\u003e£110\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-9-pin-cortex-m-adapter-8-06-02\"\u003e9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eEmbase Samtec FTSH 9 broches, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eEmbase 10 broches, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eCâblage libre pour brochages non standard\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eCommandez le 10-Pin Needle Adapter pour \u003cspan data-ds-price=\"segger-8-06-04-10-pin-needle-adapter\"\u003e£114\u003c\/span\u003e HT, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSondes de debug SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière révision le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/10-pin-needle-adapter\/\"\u003ePage produit SEGGER 10-Pin Needle Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/10-pin-needle-adapter\"\u003eBoutique SEGGER : 10-Pin Needle Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/6-pin-needle-adapter\/\"\u003ePage produit SEGGER 6-Pin Needle Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eBase de connaissances SEGGER : 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172473055,"sku":"8.06.04","price":114.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-04-40212885340383.jpg?v=1689520082"},{"product_id":"segger-8-06-28-50-mil-10-pin-patch-adapter","title":"Adaptateur de raccordement SEGGER 0,1\" à 50 mil 10 broches","description":"\u003cp\u003eLe SEGGER 50-Mil 10-Pin Patch Adapter (référence 8.06.28) adapte le connecteur J-Link standard 20 broches au pas de 0,1\" au connecteur Cortex-M standard 10 broches au pas de 0,05\", et permet de réaliser vos propres connexions et câblages entre le côté 20 broches et le côté 10 broches. SEGGER précise que le connecteur 10 broches 0,05\" se retrouve aussi sur de nombreuses cartes non Cortex-M au brochage non standard ; c'est grâce à la connexion par patch qu'une sonde J-Link peut accéder à ces cartes. Il convient à la mise en route de matériel spécifique ou ancien dont le connecteur de débogage ne suit pas le brochage ARM.\u003c\/p\u003e\n\n\u003ch2\u003eCâblage personnalisé entre les côtés 20 broches et 10 broches\u003c\/h2\u003e\n\u003cp\u003eUn adaptateur fixe ne fonctionne que si la cible suit le brochage standard. Le Patch Adapter vous permet d'acheminer chaque signal du côté J-Link vers la broche utilisée par la cible sur son connecteur 10 broches 0,05\" : une carte au brochage maison ou propre à un fabricant peut ainsi être déboguée sans câble spécifique. Côté sonde, on trouve le connecteur J-Link standard 20 broches 0,1\" présent sur la plupart des modèles J-Link. Les brochages et les options d'adaptateurs sont détaillés dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003ebrochage du connecteur 20 broches SEGGER J-Link\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eModèles J-Link et Flasher compatibles\u003c\/h2\u003e\n\u003cp\u003eSEGGER indique que le Patch Adapter convient au Flasher ARM ainsi qu'aux J-Link Pro PoE, J-Link Pro, J-Link WiFi, J-Link PLUS Compact et J-Link BASE Compact.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCôté sonde\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20 broches, 0,1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCôté cible\u003c\/th\u003e\n\u003ctd\u003eConnecteur Cortex-M 10 broches, 0,05\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCâblage\u003c\/th\u003e\n\u003ctd\u003eConnexions personnalisées entre les côtés 20 broches et 10 broches\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSondes compatibles\u003c\/th\u003e\n\u003ctd\u003eFlasher ARM ; J-Link Pro PoE, Pro, WiFi, PLUS Compact, BASE Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRéférence\u003c\/th\u003e\n\u003ctd\u003e8.06.28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cp\u003eSEGGER ne publie pas de liste de colisage pour cet adaptateur ; la commande porte sur le 50-Mil 10-Pin Patch Adapter seul.\u003c\/p\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER ne publie ni brochage, ni schéma de câblage, ni plan mécanique pour la zone de patch ; préparez le routage à partir de la documentation de votre cible.\u003c\/li\u003e\n  \u003cli\u003ePour une cible qui suit le brochage ARM Cortex-M 9 broches, le 9-Pin Cortex-M Adapter fixe ne nécessite aucun câblage.\u003c\/li\u003e\n  \u003cli\u003eLa liste des produits compatibles publiée par SEGGER pour cet adaptateur n'inclut ni le J-Link Ultra ni les modèles Classic, et cite le Flasher ARM comme seul Flasher.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eComparaison du 50-Mil 10-Pin Patch Adapter avec des adaptateurs similaires\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdaptateur\u003c\/th\u003e\n\u003cth\u003eConnexion à la cible\u003c\/th\u003e\n\u003cth\u003eAffectation des broches\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e50-Mil 10-Pin Patch Adapter (ce produit)\u003c\/td\u003e\n\u003ctd\u003eConnecteur 10 broches, 0,05\"\u003c\/td\u003e\n\u003ctd\u003eCâblage personnalisé\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-9-pin-cortex-m-adapter-8-06-02\"\u003e9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e9 broches, 0,05\" Samtec FTSH\u003c\/td\u003e\n\u003ctd\u003eFixe, ARM Cortex-M\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-9-pin-cortex-m-adapter-8-06-02\"\u003e£35\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-27-flying-wire-adapter\"\u003eFlying Wire Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRangée de 10 broches pour fils volants\u003c\/td\u003e\n\u003ctd\u003eFil vers tout point de la cible\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-13-measurement-patch-adapter\"\u003eMeasurement Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eCavaliers à code couleur et points de test\u003c\/td\u003e\n\u003ctd\u003eCâblage personnalisé, contrôle des signaux\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eCommandez le 50-Mil 10-Pin Patch Adapter pour \u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e HT, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003esondes de débogage SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière vérification le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/segger-50-mil-10-pin-patch-adapter\/\"\u003ePage produit SEGGER 50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/50-mil-10-pin-patch-adapter\"\u003eBoutique SEGGER : 50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eBase de connaissances SEGGER : 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/9-pin-cortex-m-adapter\/\"\u003ePage produit SEGGER 9-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/segger-flying-wire-adapter\/\"\u003ePage produit SEGGER Flying Wire Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/measurement-patch-adapter\/\"\u003ePage produit SEGGER Measurement+Patch Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172505823,"sku":"8.06.28","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-28-40212735230175.jpg?v=1689515049"},{"product_id":"segger-8-06-15-intel-fpga-adapter","title":"Adaptateur FPGA Intel SEGGER","description":"\u003cp\u003eThe SEGGER Intel FPGA Adapter (part number 8.06.15, formerly the J-Link Altera Adapter) connects a J-Link or Flasher to the 10-pin 100-mil Intel FPGA JTAG connector, giving debug access to MCU cores inside the FPGA such as the dual-core ARM Cortex-A9 in Cyclone V devices. SEGGER's shop lists it with a 10-pin ribbon cable. It is for firmware engineers debugging the hard processor system on Intel SoC FPGA boards with the J-Link they already use.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link Debug for Cortex-A9 Cores in Intel SoC FPGAs\u003c\/h2\u003e\n\u003cp\u003eThe adapter converts the standard J-Link 20-pin 0.1\" connector found on most J-Link models to the Intel FPGA 10-pin JTAG layout. SEGGER's schematic shows VTref, TRST, TDI, TMS, TCK, TDO and RESET. SEGGER's Knowledge Base page for the Arria 10 SoC Development Kit lists the board's JTAG connector J24 as connected \"via Intel FPGA Adapter\", so the same adapter covers Cyclone V and Arria 10 SoC development hardware. Pin assignments and adapter options are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the Intel FPGA Adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eIntel FPGA 10-pin, 100-mil JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals (SEGGER schematic)\u003c\/th\u003e\n\u003ctd\u003eVTref, TRST, TDI, TMS, TCK, TDO, RESET\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExample targets\u003c\/th\u003e\n\u003ctd\u003eCyclone V (dual-core ARM Cortex-A9); Arria 10 SoC Development Kit (J24)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFormer name\u003c\/th\u003e\n\u003ctd\u003eJ-Link Altera Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIntel FPGA Adapter\u003c\/li\u003e\n  \u003cli\u003e10-pin ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs listed in SEGGER's shop (\"Incl. 10 pin ribbon cable\").\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJTAG only; SEGGER's schematic shows no SWD signals.\u003c\/li\u003e\n  \u003cli\u003eSEGGER describes it for debug access to MCU cores in the FPGA; it does not list FPGA configuration.\u003c\/li\u003e\n  \u003cli\u003eFor the 14-pin 2mm Xilinx JTAG connector (Zynq), use the Xilinx Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIntel FPGA Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eTypical targets\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIntel FPGA Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e10-pin, 100-mil Intel FPGA JTAG\u003c\/td\u003e\n\u003ctd\u003eCortex-A9 in Cyclone V\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-15-intel-fpga-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-19-xilinx-adapter\"\u003eXilinx Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin, 2mm Xilinx JTAG\u003c\/td\u003e\n\u003ctd\u003eCortex-A9 in Zynq\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-03-14-pin-ti-adapter\"\u003e14-Pin TI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTI 14-pin JTAG, 0.1\"\u003c\/td\u003e\n\u003ctd\u003eTI MCUs, e.g. OMAP3530\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-03-14-pin-ti-adapter\"\u003e£62\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-27-flying-wire-adapter\"\u003eFlying Wire Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin row for flying wires\u003c\/td\u003e\n\u003ctd\u003ePrototypes, non-standard pinouts\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Intel FPGA Adapter for \u003cspan data-ds-price=\"segger-8-06-15-intel-fpga-adapter\"\u003e£60\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/intel-fpga-adapter\/\"\u003eSEGGER Intel FPGA Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/intel-fpga-adapter\"\u003eSEGGER shop: Intel FPGA Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Arria_10_SoC_Development_Kit\"\u003eSEGGER Knowledge Base: Arria 10 SoC Development Kit\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/xilinx-adapter\/\"\u003eSEGGER Xilinx Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172571359,"sku":"8.06.15","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-15-40212883308767.jpg?v=1689520088"},{"product_id":"segger-8-06-27-flying-wire-adapter","title":"Adaptateur de fil volant SEGGER","description":"\u003cp\u003eThe SEGGER Flying Wire Adapter (part number 8.06.27) adapts the standard 20-pin 0.1\" J-Link connector to a 10-pin row, so a J-Link or Flasher can be wired to a target PCB with flying wires. SEGGER describes it as especially useful for prototype hardware where no final debug connector has been chosen yet, and for connecting a J-Link by hand to ST Discovery boards. It suits early bring-up, when the debug signals sit on test points or pin headers in no standard order.\u003c\/p\u003e\n\n\u003ch2\u003eWire J-Link to Any Target Point\u003c\/h2\u003e\n\u003cp\u003eInstead of a fixed connector, the adapter breaks the J-Link signals out to a 10-pin row, and each wire goes wherever the target exposes that signal. SEGGER's schematic shows VTref, TRST, TDI, TMS, TCK, RTCK, TDO, RESET, pin 17 and VSUPPLY on the 10-pin row, with GND on a separate 3-pin header. The board is printed TMS\/SWDIO, TCK\/SWCLK and TDO\/SWO, so the same row serves JTAG and SWD wiring. The probe side is the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the Flying Wire Adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e10-pin signal row and 3-pin GND header, for flying wires\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals (SEGGER schematic and board print)\u003c\/th\u003e\n\u003ctd\u003e10-pin row, J-Link pin in brackets: VTref (1), TRST (3), TDI (5), TMS\/SWDIO (7), TCK\/SWCLK (9), RTCK (11), TDO\/SWO (13), RESET (15), pin 17 (17), VSUPPLY (19). 3-pin header: GND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIntended use\u003c\/th\u003e\n\u003ctd\u003ePrototype hardware without a final connector; manual connection to ST Discovery boards\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. Its product page pictures a set of coloured jumper wires alongside the board, but neither that page nor SEGGER's shop states how many wires are supplied.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHand wiring suits the bench, not repeat connection in production; for a header-free board in volume, the \u003ca href=\"\/fr\/products\/segger-8-06-04-10-pin-needle-adapter\"\u003e10-Pin Needle Adapter\u003c\/a\u003e fits a fixed footprint.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no wire count, wire length or electrical specification.\u003c\/li\u003e\n  \u003cli\u003eFor a 10-pin 0.05\" header with a non-standard pinout, the 50-Mil 10-Pin Patch Adapter keeps a connector on the target side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlying Wire Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connection\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlying Wire Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e10-pin row for flying wires\u003c\/td\u003e\n\u003ctd\u003ePrototypes, ST Discovery boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin, 0.05\" header\u003c\/td\u003e\n\u003ctd\u003eNon-standard 10-pin pinouts\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-13-measurement-patch-adapter\"\u003eMeasurement Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e20-pin 0.1\" header, with colour-coded jumper wires and test points\u003c\/td\u003e\n\u003ctd\u003eCustom connections with signal checks\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Flying Wire Adapter for \u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/segger-flying-wire-adapter\/\"\u003eSEGGER Flying Wire Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/flying-wire-adapter\"\u003eSEGGER shop: Flying Wire Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/segger-50-mil-10-pin-patch-adapter\/\"\u003eSEGGER 50-Mil 10-Pin Patch Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/measurement-patch-adapter\/\"\u003eSEGGER Measurement+Patch Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172604127,"sku":"8.06.27","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-27-40212744601823.jpg?v=1689515945"},{"product_id":"segger-8-06-08-j-link-mictor-38-adapter","title":"Adaptateur SEGGER J-Link Mictor 38","description":"\u003cp\u003eThe SEGGER J-Link Mictor 38 Adapter (part number 8.06.08) adapts the standard J-Link 20-pin 0.1\" target connector to the 38-pin Mictor connector, following the single target connector pinout defined in the ARM \"ETM Architecture Specification\". It links the GND and JTAG pins to their counterparts on the 20-pin J-Link; the trace pins on the Mictor connector are not connected. It is for JTAG debug of targets that expose only a Mictor 38 header, using a J-Link rather than a trace probe.\u003c\/p\u003e\n\n\u003ch2\u003eJTAG Debug Through a Mictor 38 Header\u003c\/h2\u003e\n\u003cp\u003eThe Mictor side plugs into the target directly or through a trace cable, and the J-Link side connects through a 20-pin flat cable to the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eMictor 38 Pins Used by the Adapter\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMictor pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003enRES\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003eTDO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e12, 14\u003c\/td\u003e\n\u003ctd\u003eVTref\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003eRTCK\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003eTCK\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003ctd\u003eTMS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003ctd\u003eTDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003ctd\u003eTRST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact, Flasher ARM, Flasher Portable PLUS and Flasher Secure, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\", via 20-pin flat cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e38-pin Mictor, direct or via trace cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePinout standard\u003c\/th\u003e\n\u003ctd\u003eSingle target connector, ARM \"ETM Architecture Specification\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals connected\u003c\/th\u003e\n\u003ctd\u003eGND and JTAG (TDI, TMS, TCK, RTCK, TDO, TRST, nRES, VTref)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace pins\u003c\/th\u003e\n\u003ctd\u003eNot connected\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.08\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter; the order is for the J-Link Mictor 38 Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo trace. The 20-pin J-Link connector has no trace pins, so the Mictor trace pins are left unconnected; SEGGER points to J-Trace for trace.\u003c\/li\u003e\n  \u003cli\u003eFor J-Trace, SEGGER makes a separate J-Trace Mictor 38 Adapter that carries trace signals.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no electrical or mechanical specification for the adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link Mictor 38 Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eProbe and trace\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link Mictor 38 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e38-pin Mictor\u003c\/td\u003e\n\u003ctd\u003eJ-Link or Flasher; JTAG only, no trace\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-08-j-link-mictor-38-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-21-j-trace-mictor-38-adapter\"\u003eJ-Trace Mictor 38 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e38-pin Mictor\u003c\/td\u003e\n\u003ctd\u003eJ-Trace PRO; four trace data pins plus trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-21-j-trace-mictor-38-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-6-06-42-mipi-60-adapter-uk\"\u003eMIPI-60 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMIPI-60, Jacinto7 TI targets\u003c\/td\u003e\n\u003ctd\u003eJ-Link, J-Trace or Flasher; TPIU trace up to 4 pins\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-06-42-mipi-60-adapter-uk\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-00-19-pin-cortex-m-adapter\"\u003e19-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19-pin, 0.05\" Samtec FTSH\u003c\/td\u003e\n\u003ctd\u003eJ-Link or Flasher; JTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-00-19-pin-cortex-m-adapter\"\u003e£38\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the J-Link Mictor 38 Adapter for \u003cspan data-ds-price=\"segger-8-06-08-j-link-mictor-38-adapter\"\u003e£185\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/j-link-mictor-38-adapter\/\"\u003eSEGGER J-Link Mictor 38 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/debug-trace-probes\/debug-probes\/adapters\/j-link-mictor-38-adapter\"\u003eSEGGER shop: J-Link Mictor 38 Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/adapters\/j-trace-mictor-38-adapter\/\"\u003eSEGGER J-Trace Mictor 38 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/mipi-60-adapter\/\"\u003eSEGGER MIPI-60 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172636895,"sku":"8.06.08","price":185.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-08-40212943175903.jpg?v=1689523319"},{"product_id":"segger-8-06-23-microchip-2-wire-jtag-tdi-adapter","title":"Adaptateur JTAG TDI à 2 fils SEGGER Microchip","description":"\u003cp\u003eThe SEGGER Microchip 2-Wire JTAG TDI Adapter (part number 8.06.23) connects a J-Link debug probe to target hardware built on Microchip IS208x series MCUs. It adapts the standard J-Link 20-pin 0.1\" connector to the Microchip 6-pin single row 0.1\" connector and carries the 2-wire JTAG TDI interface.\u003c\/p\u003e\n\n\u003ch2\u003e2-Wire JTAG Connection for Microchip IS208x MCUs\u003c\/h2\u003e\n\u003cp\u003eJ-Link talks to the IS2083 over the Microchip 2-wire JTAG protocol: one bidirectional data line and a clock supplied by J-Link, plus RESET, VTref and GND. SEGGER's IS2083 getting started guide recommends this adapter for the J301 header on the BM8x evaluation board and maps the five signals to J-Link pins 15 (RESET), 1 (VTref), 4 (GND), 5 (TDI) and 9 (TCK). Pin assignments for the probe side are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Link Models and Software\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact). SEGGER states that the IS2083 is currently supported in J-Link Commander and in Keil uVision for PK51, which needs Keil C51\/PK51 tools V9.59 or later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.23\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eMicrochip 6-pin single row, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMicrochip 2-wire JTAG (TDI)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget pinout\u003c\/th\u003e\n\u003ctd\u003e1 #RESET, 2 VDD, 3 GND, 4 TDI, 5 TCK, 6 NC (populated, not connected)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget devices\u003c\/th\u003e\n\u003ctd\u003eMicrochip IS208x series MCUs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSchematic\u003c\/th\u003e\n\u003ctd\u003eAvailable from SEGGER on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 20-pin to 6-pin adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMade for Microchip IS208x series MCUs only. For PIC32 targets, see the Microchip LVP Adapter for PIC32.\u003c\/li\u003e\n  \u003cli\u003eSEGGER currently lists IS2083 support in J-Link Commander and Keil uVision for PK51 only.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's suitable products list names J-Link models only; no Flasher and no J-Link EDU models are listed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMicrochip 2-Wire JTAG TDI Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMicrochip 2-Wire JTAG TDI Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eMicrochip IS208x, 2-wire JTAG\u003c\/td\u003e\n\u003ctd\u003e6-pin single row 0.1\"\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-23-microchip-2-wire-jtag-tdi-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-microchip-lvp-adapter-pic32-debugging-80609\"\u003eMicrochip LVP Adapter for PIC32\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMicrochip PIC32\u003c\/td\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-microchip-lvp-adapter-pic32-debugging-80609\"\u003e£59\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-17-silabs-c2-adapter\"\u003eSiLabs C2 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSilicon Labs C2 debug interface\u003c\/td\u003e\n\u003ctd\u003e10-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-17-silabs-c2-adapter\"\u003e£75\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-10-renesas-rx-fine-adapter\"\u003eRX FINE Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RX, FINE interface\u003c\/td\u003e\n\u003ctd\u003e14-pin 0.1\" Renesas\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-10-renesas-rx-fine-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Microchip 2-Wire JTAG TDI Adapter for \u003cspan data-ds-price=\"segger-8-06-23-microchip-2-wire-jtag-tdi-adapter\"\u003e£66\u003c\/span\u003e ex VAT. Check that your device is an IS208x series part, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/microchip-2-wire-jtag-tdi-adapter\/\"\u003eSEGGER Microchip 2-Wire JTAG TDI Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/IS2083_Getting_Started\"\u003eSEGGER Knowledge Base: IS2083 Getting Started\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172669663,"sku":"8.06.23","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-23-40212945600735.jpg?v=1689523498"},{"product_id":"segger-8-06-13-measurement-patch-adapter","title":"Adaptateur de patch de mesure SEGGER","description":"\u003cp\u003eThe SEGGER Measurement+Patch Adapter (part number 8.06.13) plugs between a J-Link or Flasher and the target on standard 20-pin 0.1\" headers, with test points on the debug signals and a patch field for custom wiring. It connects targets that have no compatible standard debug connector, and gives scope access to the probe connection for signal integrity checks. Colour-coded jumper wires keep each signal easy to identify.\u003c\/p\u003e\n\n\u003ch2\u003eCustom Wiring for Targets Without a Standard Debug Connector\u003c\/h2\u003e\n\u003cp\u003eWhen no existing SEGGER adapter fits the target, the patch field lets you route each debug signal by hand. SEGGER's schematic shows VTREF, TRST, TDI, TMS, TCK, RTCK, TDO, RESET and VSUPPLY brought through the adapter. On the probe side it takes the standard J-Link 20-pin 0.1\" connector found on most J-Link models; pin assignments are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eTest Points for Signal Integrity Checks\u003c\/h2\u003e\n\u003cp\u003eTest points on the debug signals let you put a scope probe on the lines between programmer and target without disturbing the wiring. SEGGER's Knowledge Base article on signal integrity shows an SWD example with overshoot and ringing on SWCLK, measured with an active scope probe; it notes that inserting a Measurement+Patch adapter changed the signal enough for the connection to work.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.13\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eInline, standard 20-pin 0.1\" headers on both sides\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunctions\u003c\/th\u003e\n\u003ctd\u003eSignal test points, patch field for custom wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals on schematic\u003c\/th\u003e\n\u003ctd\u003eVTREF, TRST, TDI, TMS, TCK, RTCK, TDO, RESET, VSUPPLY\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003eColour-coded jumper wires\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable J-Link models\u003c\/th\u003e\n\u003ctd\u003ePro PoE, Pro, Ultra, WiFi, PLUS (Classic and Compact), BASE (Classic and Compact)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable Flasher models\u003c\/th\u003e\n\u003ctd\u003ePro, Pro XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Measurement+Patch Adapter\u003c\/li\u003e\n  \u003cli\u003eJumper wires for manual setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe adapter is made to give access to the signals, not to damp them. To reduce overshoot and ringing, SEGGER's Knowledge Base points to the Signal Smoothing Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no pinout table for the patch field on the product page; the schematic is the reference.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMeasurement+Patch Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMeasurement+Patch Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eInline 20-pin adapter with test points and a patch field\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-27-flying-wire-adapter\"\u003eFlying Wire Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eConverts the 20-pin connector to a 10-pin row for wiring to prototype boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e50-Mil 10-Pin Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eCustom wiring between the 20-pin connector and a 10-pin 0.05\" Cortex-M style connector\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-28-50-mil-10-pin-patch-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-6-12-signal-smoothing-adapter\"\u003eSignal Smoothing Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable series resistors to damp JTAG overshoot and ringing\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-6-12-signal-smoothing-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Measurement+Patch Adapter for \u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/measurement-patch-adapter\/\"\u003eSEGGER Measurement+Patch Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Signal_Integrity\"\u003eSEGGER Knowledge Base: Signal Integrity\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172702431,"sku":"8.06.13","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-13-40212886585567.jpg?v=1689520259"},{"product_id":"segger-8-06-21-j-trace-mictor-38-adapter","title":"Adaptateur SEGGER J-Trace Mictor 38","description":"\u003cp\u003eThe SEGGER J-Trace Mictor 38 Adapter (part number 8.06.21) connects a J-Trace PRO to a target with a 38-pin Mictor connector, carrying JTAG, GND, the trace clock and four trace data lines. Its pinout follows the single target connector pinout defined in the ARM \"ETM Architecture Specification\". It is for engineers who need ETM trace on boards that bring trace out on a Mictor header instead of the 0.05\" Cortex-M connector.\u003c\/p\u003e\n\n\u003ch2\u003eMictor 38 to J-Trace Trace Connector\u003c\/h2\u003e\n\u003cp\u003eThe adapter routes the GND, JTAG and some trace pins of the Mictor connector to their counterparts on the J-Trace's 0.05\" Cortex-M trace connector. TRACECLK and TRACEDATA0 to TRACEDATA3 are passed through, so a 4-bit trace port reaches the probe along with the debug signals. The Mictor side plugs directly into the target or connects through a trace cable; the J-Trace side connects to the probe with a half-pitch flat cable.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Trace PRO Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for the J-Trace PRO, J-Trace PRO Cortex-A\/R\/M and J-Trace PRO Cortex-M. The 19-pin JTAG\/SWD and Trace connector on these probes is described in SEGGER's Knowledge Base, and the 20-pin 0.1\" debug connector in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter; the J-Trace Mictor 38 Adapter itself is what is certain.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003ctd\u003e38-pin Mictor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe connector\u003c\/th\u003e\n\u003ctd\u003eJ-Trace 0.05\" Cortex-M trace connector, via half-pitch flat cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePinout standard\u003c\/th\u003e\n\u003ctd\u003eSingle target connector, ARM \"ETM Architecture Specification\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals carried\u003c\/th\u003e\n\u003ctd\u003eGND, JTAG, TRACECLK, TRACEDATA0 to TRACEDATA3\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget attachment\u003c\/th\u003e\n\u003ctd\u003eDirect to the target, or through a trace cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible probes\u003c\/th\u003e\n\u003ctd\u003eJ-Trace PRO, J-Trace PRO Cortex-A\/R\/M, J-Trace PRO Cortex-M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFour trace data lines (TRACEDATA0 to TRACEDATA3) are carried.\u003c\/li\u003e\n  \u003cli\u003eSEGGER does not list the J-Trace PRO RISC-V as a suitable probe.\u003c\/li\u003e\n  \u003cli\u003eFor a J-Link with no trace, use the J-Link Mictor 38 Adapter, which connects to the 20-pin 0.1\" J-Link connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace Mictor 38 Adapter Compared with the J-Link Version\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eFor\u003c\/th\u003e\n\u003cth\u003eTrace pins\u003c\/th\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace Mictor 38 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eJ-Trace PRO models\u003c\/td\u003e\n\u003ctd\u003eTRACECLK, TRACEDATA0 to 3 connected\u003c\/td\u003e\n\u003ctd\u003e0.05\" Cortex-M trace connector\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-21-j-trace-mictor-38-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-08-j-link-mictor-38-adapter\"\u003eJ-Link Mictor 38 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eJ-Link and Flasher\u003c\/td\u003e\n\u003ctd\u003eNot connected\u003c\/td\u003e\n\u003ctd\u003e20-pin J-Link connector, flat cable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-08-j-link-mictor-38-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the J-Trace Mictor 38 Adapter for \u003cspan data-ds-price=\"segger-8-06-21-j-trace-mictor-38-adapter\"\u003e£185\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See our \u003ca href=\"\/fr\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e and the full \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/adapters\/j-trace-mictor-38-adapter\/\"\u003eSEGGER J-Trace Mictor 38 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/j-link-mictor-38-adapter\/\"\u003eSEGGER J-Link Mictor 38 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172735199,"sku":"8.06.21","price":185.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-21-40272809984223.jpg?v=1691332324"},{"product_id":"segger-8-06-30-programming-voltage-adapter","title":"Adaptateur de tension de programmation SEGGER","description":"\u003cp\u003eThe SEGGER Programming Voltage Adapter (part number 8.06.30) sits between a Flasher and its debug cable and delivers two independently controlled voltages, one for programming and one for target supply. Each channel covers 4V to 20V at up to 500mA, for targets that need a programming voltage above their supply voltage, including voltages beyond the standard 5V limit. The voltages come from an external power supply and are controlled by the Flasher.\u003c\/p\u003e\n\n\u003ch2\u003eProgramming Voltages Above 5V on Pin 17\u003c\/h2\u003e\n\u003cp\u003eAll debug signals pass through 1:1 except pin 17, which carries the programming voltage. Both connectors are the standard 20-pin 0.1\" socket and header, so the adapter plugs straight into the probe and takes the existing ribbon cable. Where the target runs from 5V, a jumper selects an optional 5V target supply from the Flasher. Pin assignments for the standard J-Link 20-pin 0.1\" connector are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible Flasher and J-Link Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact). SEGGER's description of how the voltages are controlled refers to the Flasher; ask us before planning a J-Link set-up around it.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.30\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003eProgramming voltage and target supply voltage, independently controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVoltage range (both channels)\u003c\/th\u003e\n\u003ctd\u003e4V to 20V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaximum current\u003c\/th\u003e\n\u003ctd\u003e500mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVoltage source\u003c\/th\u003e\n\u003ctd\u003eExternal power supply, controlled by the Flasher\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003e5V option\u003c\/th\u003e\n\u003ctd\u003e5V target supply from the Flasher, selected by jumper\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgramming voltage pin\u003c\/th\u003e\n\u003ctd\u003ePin 17\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignal mapping\u003c\/th\u003e\n\u003ctd\u003e1:1 except pin 17\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" socket and header\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the Programming Voltage Adapter itself is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe 4V to 20V channels need an external power supply.\u003c\/li\u003e\n  \u003cli\u003ePin 17 carries the programming voltage, so the J-Link Rx line for VCOM in SWD is not available through the adapter. In JTAG, pin 17 is DBGRQ, which J-Link does not connect. Check that nothing else on the target is wired to pin 17 before applying up to 20V.\u003c\/li\u003e\n  \u003cli\u003eMaximum current is 500mA.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProgramming Voltage Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it supplies\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProgramming Voltage Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eProgramming and target supply voltages, 4V to 20V, from an external supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-30-programming-voltage-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-29-5v-target-supply-adapter\"\u003e5V Target Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed 5V supply to the target\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-29-5v-target-supply-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-18-target-supply-adapter\"\u003eTarget Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable supply voltage to the target\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-14-supply-adapter\"\u003eSupply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed VTref level in place of the target's VTref, settable from 1.2V to 5.0V by changing one resistor\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Programming Voltage Adapter for \u003cspan data-ds-price=\"segger-8-06-30-programming-voltage-adapter\"\u003e£130\u003c\/span\u003e ex VAT. Check your device's programming voltage against the 4V to 20V range, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/programming-voltage-adapter\/\"\u003eSEGGER Programming Voltage Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/segger-programming-voltage-adapter\/\"\u003eSEGGER Programming Voltage Adapter (Flasher accessories)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172800735,"sku":"8.06.30","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-30-40212779860191.jpg?v=1689516123"},{"product_id":"segger-8-06-32-right-angle-female-to-female-adapter","title":"Adaptateur femelle à femelle à angle droit (RAFF) SEGGER","description":"\u003cp\u003eThe SEGGER RAFF Adapter (part number 8.06.32) is a right angle female to female adapter that plugs a J-Link or Flasher directly onto a straight (vertical) pin header on the target board, in place of the standard IDC ribbon cable. It is a 1:1 adapter, so the pinout does not change. With a J-Link PLUS Compact, J-Link BASE Compact or Flasher Compact it makes a compact debug or programming set-up.\u003c\/p\u003e\n\n\u003ch2\u003eRight Angle Connection Without a Ribbon Cable\u003c\/h2\u003e\n\u003cp\u003eThe right angle lets the probe plug onto the target header directly, with no ribbon cable between them. Because the mapping is 1:1, any target header already wired to the standard J-Link 20-pin 0.1\" connector found on most J-Link models works unchanged. Pin assignments are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible Probes, Programmers and Isolators\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for the SWD Isolator and USB Isolator.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.32\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRight angle, female to female\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignal mapping\u003c\/th\u003e\n\u003ctd\u003e1:1, pinout unchanged\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003ePlugs onto a straight (vertical) PCB pin header\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReplaces\u003c\/th\u003e\n\u003ctd\u003eStandard IDC ribbon cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignals on schematic\u003c\/th\u003e\n\u003ctd\u003eVTREF, TRST, TDI, TMS, TCK, RTCK, TDO, RESET, PIN17, VSUPPLY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the RAFF Adapter itself is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo pin remapping. A target with a different debug connector needs the matching SEGGER adapter.\u003c\/li\u003e\n  \u003cli\u003eMade for straight (vertical) target headers.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRAFF Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRAFF Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eRight angle 1:1 connection onto a vertical header, replaces the ribbon cable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-32-right-angle-female-to-female-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-11-2mm-adapter\"\u003e2mm Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eConverts the 20-pin connector to a 20-pin 2mm pitch connector, 1:1\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-11-2mm-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-27-flying-wire-adapter\"\u003eFlying Wire Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eConverts the 20-pin connector to a 10-pin row for wiring to prototype boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-27-flying-wire-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the RAFF Adapter for \u003cspan data-ds-price=\"segger-8-06-32-right-angle-female-to-female-adapter\"\u003e£64\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/segger-raff-adapter\/\"\u003eSEGGER RAFF Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172833503,"sku":"8.06.32","price":64.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-32-40212785332447.jpg?v=1689516300"},{"product_id":"segger-8-06-01-renesas-rx-adapter","title":"Adaptateur SEGGER Renesas RX","description":"\u003cp\u003eThe SEGGER RX Adapter (part number 8.06.01) maps the standard J-Link 20-pin 0.1\" connector to the standard 14-pin 0.1\" Renesas connector, for J-Link or Flasher connections to Renesas RX600, RX200 and RX100 series MCUs over JTAG or FINE. A jumper can power the target at 3.3V or 5V.\u003c\/p\u003e\n\n\u003ch2\u003eJTAG and FINE Connections to Renesas RX MCUs\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists JTAG for RX610, RX621, RX62G, RX62N, RX62T, RX630, RX631, RX63N, RX63T, RX64M, RX65N, RX660, RX66T, RX71M and RX72N, and FINE for RX111, RX13T, RX140, RX210, RX21A and RX220. In FINE mode the FINED line is open drain. On revisions covered by SEGGER's product page it needs a pull-up on the target (1k Ohm recommended); SEGGER's Knowledge Base says Rev9 has a 3.3k pull-up on the adapter, so no target pull-up is needed. Probe-side pin assignments are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eOptional 3.3V or 5V Target Supply\u003c\/h2\u003e\n\u003cp\u003eThe adapter can power the target hardware, with 3.3V or 5V selected by a jumper. With the supply option jumpered, the target is powered through VTref (pin 8 of the 14-pin connector). It ships set to \"do not power target\", with the jumper open.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact, Flasher Portable PLUS and Flasher Secure.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.01\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eRenesas standard 14-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, FINE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget series\u003c\/th\u003e\n\u003ctd\u003eRenesas RX600, RX200, RX100\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eJTAG pinout (14-pin)\u003c\/th\u003e\n\u003ctd\u003e1 TCK, 3 nTRST, 4 EMLE, 5 TDO, 7 MD0, 9 TMS, 10 UB, 11 TDI, 13 nRES\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFINE pinout (14-pin)\u003c\/th\u003e\n\u003ctd\u003e1 FINEC, 4 not connected (Rev9: GND), 7 FINED, 10 UB, 13 nRES\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFINED pull-up\u003c\/th\u003e\n\u003ctd\u003eOlder revisions: 1k Ohm on target recommended; Rev9: 3.3k on adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e3.3V or 5V via jumper, through VTref (pin 8); default off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x RX Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER's product page says the RX FINE Adapter is required for FINE on RX63x or RX72N; its Knowledge Base says RX Adapter Rev9 replaces the RX FINE Adapter. Ask us which revision ships.\u003c\/li\u003e\n  \u003cli\u003eSEGGER notes that adapter revisions older than 5 may lack FINE support; the revision, or on older units a production date, is printed on the back.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRX Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRX Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eRenesas RX600, RX200, RX100\u003c\/td\u003e\n\u003ctd\u003eJTAG, FINE; optional 3.3V or 5V target supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-01-renesas-rx-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-10-renesas-rx-fine-adapter\"\u003eRX FINE Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RX\u003c\/td\u003e\n\u003ctd\u003eFINE, with 3k3 pull-up on FINED\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-10-renesas-rx-fine-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-rl78-programming-adapter-8-06-20\"\u003eRL78 14-Pin Programming Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78\u003c\/td\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-renesas-m16c-family-10-pin-adapter-8-06-40\"\u003eRenesas M16C Family 10-Pin Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas M16C\u003c\/td\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-renesas-m16c-family-10-pin-adapter-8-06-40\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the RX Adapter for \u003cspan data-ds-price=\"segger-8-06-01-renesas-rx-adapter\"\u003e£130\u003c\/span\u003e ex VAT. Check your RX part against SEGGER's JTAG and FINE lists above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/rx-adapter\/\"\u003eSEGGER RX Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/RX_Adapter_Rev9\"\u003eSEGGER Knowledge Base: RX Adapter Rev9\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172866271,"sku":"8.06.01","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-01-40212783759583.jpg?v=1689516482"},{"product_id":"segger-8-06-10-renesas-rx-fine-adapter","title":"Adaptateur SEGGER Renesas RX FINE","description":"\u003cp\u003eThe SEGGER RX FINE Adapter (part number 8.06.10) maps the standard J-Link 20-pin 0.1\" connector to the standard 14-pin 0.1\" connector defined by Renesas, for FINE connections from a J-Link or Flasher to Renesas RX devices. It provides a 3k3 pull-up on the FINED line to meet the FINE interface specification.\u003c\/p\u003e\n\n\u003ch2\u003eFINE Debug and Programming for Renesas RX\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists FINE support through this adapter for the RX111, RX13T, RX140, RX210, RX21A, RX220, RX630, RX631, RX63N, RX64M, RX65N, RX651, RX66T, RX660, RX671 and RX72N. SEGGER's RX Adapter page specifies this adapter for FINE on RX63x and RX72N devices. SEGGER's Knowledge Base says RX Adapter Rev9 now covers FINE and replaces this adapter. Probe-side pin assignments are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eRenesas 14-Pin Connector Pinout\u003c\/h2\u003e\n\u003cp\u003eOn the 14-pin side, pin 1 is FINEC, pin 4 EMLE, pin 7 FINED, pin 10 UB and pin 13 nRES; SEGGER's RX130 row also shows VTref on pin 8 and GND on pins 2, 12 and 14. The signal on each pin varies by family: on the RX630, RX631, RX63N, RX63T and RX72N, for example, pin 1 is TCK\/FINEC\/P27 and pin 4 connects to EMLE, while the RX111 and RX130 have no EMLE connection.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eRenesas standard 14-pin, 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eFINE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget pinout (14-pin)\u003c\/th\u003e\n\u003ctd\u003e1 FINEC, 4 EMLE, 7 FINED, 10 UB, 13 nRES (VTref on 8 and GND on 2, 12, 14 per SEGGER's RX130 row)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFINED pull-up\u003c\/th\u003e\n\u003ctd\u003e3k3 on the adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eListed devices\u003c\/th\u003e\n\u003ctd\u003eRX111, RX13T, RX140, RX210, RX21A, RX220, RX630, RX631, RX63N, RX64M, RX65N, RX651, RX66T, RX660, RX671, RX72N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x RX FINE Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFINE only. For JTAG to Renesas RX, use the RX Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER lists no target power option for this adapter; the RX Adapter offers 3.3V or 5V by jumper.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRX FINE Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRX FINE Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eRenesas RX\u003c\/td\u003e\n\u003ctd\u003eFINE, with 3k3 pull-up on FINED\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-10-renesas-rx-fine-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-01-renesas-rx-adapter\"\u003eRX Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RX600, RX200, RX100\u003c\/td\u003e\n\u003ctd\u003eJTAG, FINE; optional 3.3V or 5V target supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-01-renesas-rx-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-rl78-programming-adapter-8-06-20\"\u003eRL78 14-Pin Programming Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78\u003c\/td\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-renesas-m16c-family-10-pin-adapter-8-06-40\"\u003eRenesas M16C Family 10-Pin Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas M16C\u003c\/td\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-renesas-m16c-family-10-pin-adapter-8-06-40\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the RX FINE Adapter for \u003cspan data-ds-price=\"segger-8-06-10-renesas-rx-fine-adapter\"\u003e£64\u003c\/span\u003e ex VAT. Check your RX part against SEGGER's FINE list above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/rx-fine-adapter\/\"\u003eSEGGER RX FINE Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/rx-adapter\/\"\u003eSEGGER RX Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/RX_Adapter_Rev9\"\u003eSEGGER Knowledge Base: RX Adapter Rev9\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172899039,"sku":"8.06.10","price":64.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-10-40213022736607.jpg?v=1689526377"},{"product_id":"segger-8-06-35-sifive-arty-trace-adapter","title":"Adaptateur de trace SEGGER SiFive-ARTY","description":"\u003cp\u003eThe SEGGER SiFive-ARTY Trace Adapter (part number 8.06.35) makes debug and trace connections between a J-Trace PRO and an ARTY board running SiFive RISC-V core bitstreams. It uses the board's JD header for debug and the JC header for trace, carrying TRACECLK and four trace data lines, TRACEDATA[0] to TRACEDATA[3]. SEGGER lists it as suitable for the J-Trace PRO and J-Trace PRO RISC-V.\u003c\/p\u003e\n\n\u003ch2\u003eDebug and Trace on the ARTY Board's JD and JC Headers\u003c\/h2\u003e\n\u003cp\u003eThe ARTY board provides several identical headers. When it runs SiFive RISC-V bitstreams with trace enabled, JD is used as the debug connector and JC as the trace connector, and the adapter connects to both. On JD it carries VTref\/VDD, GND, TCK, RESET, TRST, TMS, TDO and TDI; on JC it carries GND, TRACECLK and TRACEDATA[0] to TRACEDATA[3].\u003c\/p\u003e\n\n\u003ch2\u003eTrace with J-Trace PRO, or Debug Only with J-Link\u003c\/h2\u003e\n\u003cp\u003eThis adapter is for trace, so it pairs with a J-Trace PRO. For debug only, with a J-Link, SEGGER offers the separate SiFive-ARTY Adapter, which uses the JD header alone.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.35\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget board\u003c\/th\u003e\n\u003ctd\u003eARTY board running SiFive RISC-V core bitstreams with trace enabled\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug header\u003c\/th\u003e\n\u003ctd\u003eJD: 2 VTref\/VDD, 3 GND, 4 GND, 7 TCK, 8 RESET, 9 TRST, 10 TMS, 11 TDO, 12 TDI; 1, 5, 6 NC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace header\u003c\/th\u003e\n\u003ctd\u003eJC: 3 GND, 4 GND, 5 TRACECLK, 6 TRACEDATA[0], 8 TRACEDATA[1], 10 TRACEDATA[2], 12 TRACEDATA[3]; 1, 2, 7, 9, 11 NC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable probes\u003c\/th\u003e\n\u003ctd\u003eJ-Trace PRO, J-Trace PRO RISC-V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the SiFive-ARTY Trace Adapter itself is supplied. The ARTY board and the J-Trace PRO are not included.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNeeds a J-Trace PRO or J-Trace PRO RISC-V; SEGGER lists no J-Link models for this adapter.\u003c\/li\u003e\n  \u003cli\u003eTrace needs a SiFive RISC-V bitstream on the ARTY board with trace enabled.\u003c\/li\u003e\n  \u003cli\u003eSEGGER does not state the connector type on the J-Trace side on the product page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSiFive-ARTY Trace Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003cth\u003eDebug or trace\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSiFive-ARTY Trace Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eARTY board, SiFive RISC-V bitstreams, JD and JC headers\u003c\/td\u003e\n\u003ctd\u003eDebug and trace, with J-Trace PRO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-35-sifive-arty-trace-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-24-sifive-arty-adapter\"\u003eSiFive-ARTY Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARTY board, SiFive RISC-V bitstreams, JD header\u003c\/td\u003e\n\u003ctd\u003eDebug, with J-Link\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-24-sifive-arty-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-19-xilinx-adapter\"\u003eXilinx Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin 2mm Xilinx JTAG connector, Zynq-based cores\u003c\/td\u003e\n\u003ctd\u003eDebug\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-15-intel-fpga-adapter\"\u003eIntel FPGA Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin Intel FPGA JTAG connector, FPGA-based cores\u003c\/td\u003e\n\u003ctd\u003eDebug\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-15-intel-fpga-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the SiFive-ARTY Trace Adapter for \u003cspan data-ds-price=\"segger-8-06-35-sifive-arty-trace-adapter\"\u003e£130\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/adapters\/sifive-arty-trace-adapter\/\"\u003eSEGGER SiFive-ARTY Trace Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/j-link-sifive-arty-adapter\/\"\u003eSEGGER SiFive-ARTY Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172931807,"sku":"8.06.35","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-35-40280515084511.jpg?v=1691069337"},{"product_id":"segger-8-06-24-sifive-arty-adapter","title":"Adaptateur SEGGER SiFive-ARTY","description":"\u003cp\u003eThe SEGGER SiFive-ARTY Adapter (part number 8.06.24) makes debug connections between a J-Link and an ARTY board running SiFive RISC-V core bitstreams. It connects to the board's JD header, which is used as the debug connector for SiFive RISC-V bitstreams, and carries JTAG (TDI, TMS, TCK, TDO), nTRST, nRESET, VTref and GND.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link Debug for SiFive RISC-V on the ARTY Board\u003c\/h2\u003e\n\u003cp\u003eThe ARTY board provides several identical headers; when it runs SiFive RISC-V bitstreams, JD is the debug connector. The adapter plugs onto JD and brings the JTAG signals to the J-Link, so you can load and debug code on the SiFive core with the same probe used for other targets. Probe-side pin assignments are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Link Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact). For trace as well as debug, SEGGER offers the SiFive-ARTY Trace Adapter for the J-Trace PRO, which adds the JC header.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.24\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget board\u003c\/th\u003e\n\u003ctd\u003eARTY board running SiFive RISC-V core bitstreams\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget header\u003c\/th\u003e\n\u003ctd\u003eJD (debug connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget pinout\u003c\/th\u003e\n\u003ctd\u003e1 TDO, 2 nTRST, 3 TCK, 7 TDI, 8 TMS, 9 nRESET, 11 GND, 12 VTref; 4, 5, 6, 10 NC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable J-Link models\u003c\/th\u003e\n\u003ctd\u003ePro PoE, Pro, Ultra, WiFi, PLUS (Classic and Compact), BASE (Classic and Compact)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the SiFive-ARTY Adapter itself is supplied. The ARTY board is not included.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDebug only; no trace. For trace, use the SiFive-ARTY Trace Adapter with a J-Trace PRO.\u003c\/li\u003e\n  \u003cli\u003eFor the ARTY board with SiFive RISC-V bitstreams; other FPGA boards need their own adapter, such as the Xilinx or Intel FPGA Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's suitable products list names J-Link models only; no Flasher and no J-Link EDU models are listed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSiFive-ARTY Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003cth\u003eDebug or trace\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSiFive-ARTY Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eARTY board, SiFive RISC-V bitstreams, JD header\u003c\/td\u003e\n\u003ctd\u003eDebug, with J-Link\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-24-sifive-arty-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-35-sifive-arty-trace-adapter\"\u003eSiFive-ARTY Trace Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARTY board, SiFive RISC-V bitstreams, JD and JC headers\u003c\/td\u003e\n\u003ctd\u003eDebug and trace, with J-Trace PRO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-35-sifive-arty-trace-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-19-xilinx-adapter\"\u003eXilinx Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin 2mm Xilinx JTAG connector, Zynq-based cores\u003c\/td\u003e\n\u003ctd\u003eDebug\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-15-intel-fpga-adapter\"\u003eIntel FPGA Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin Intel FPGA JTAG connector, FPGA-based cores\u003c\/td\u003e\n\u003ctd\u003eDebug\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-15-intel-fpga-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the SiFive-ARTY Adapter for \u003cspan data-ds-price=\"segger-8-06-24-sifive-arty-adapter\"\u003e£63\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/j-link-sifive-arty-adapter\/\"\u003eSEGGER SiFive-ARTY Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/adapters\/sifive-arty-trace-adapter\/\"\u003eSEGGER SiFive-ARTY Trace Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172964575,"sku":"8.06.24","price":63.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-24-40212781039839.jpg?v=1689516126"},{"product_id":"segger-8-6-12-signal-smoothing-adapter","title":"Adaptateur de lissage de signal SEGGER","description":"\u003cp\u003eThe SEGGER Signal Smoothing Adapter (part number 8.06.12) is inserted between a J-Link debug probe or Flasher in-circuit programmer and the debug target to overcome signal integrity issues. User-adjustable series resistors, 47R by default, damp critical signal rise and fall times to counter overshoot and ringing on the debug lines.\u003c\/p\u003e\n\n\u003ch2\u003eSeries Resistors to Damp Overshoot and Ringing\u003c\/h2\u003e\n\u003cp\u003eSEGGER notes that JTAG signals can be affected by overshoot and ringing. The adapter places series resistors in the critical lines to damp the edges, and the values can be changed to suit the target. SEGGER's own example uses a target with minimum capacitive load on the JTAG signals (below 3 pF), connected through a 60 cm standard flat ribbon cable.\u003c\/p\u003e\n\n\u003ch2\u003eProven on SWD in SEGGER's Signal Integrity Guide\u003c\/h2\u003e\n\u003cp\u003eSEGGER's Knowledge Base article on signal integrity lists the Signal Smoothing Adapter as a mitigation for overshoot. In its SWD example, inserting the adapter makes the voltage curves smoother, the overshoot and ringing are flattened and communication succeeds. The same article measures the SWCLK line with an active scope probe, and notes that inserting a Measurement+Patch adapter also changed the signal enough for the connection to work.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.12\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eInline, between probe or programmer and target\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSeries resistors\u003c\/th\u003e\n\u003ctd\u003eUser adjustable, default 47R\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePurpose\u003c\/th\u003e\n\u003ctd\u003eDamping critical signal rise and fall times (overshoot and ringing)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable J-Link models\u003c\/th\u003e\n\u003ctd\u003ePro PoE, Pro, Ultra, WiFi, PLUS (Classic and Compact), BASE (Classic and Compact)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable Flasher models\u003c\/th\u003e\n\u003ctd\u003ePro, Pro XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the Signal Smoothing Adapter itself is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER publishes the 47R default and one example set-up, but no guide to choosing other resistor values.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's signal integrity article also recommends considering target hardware fixes, such as series resistors or layout improvements.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSignal Smoothing Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it changes on the probe connection\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSignal Smoothing Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eAdds adjustable series resistors to damp overshoot and ringing\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-6-12-signal-smoothing-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-13-measurement-patch-adapter\"\u003eMeasurement+Patch Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdds test points on the debug signals and a patch field for custom wiring\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-13-measurement-patch-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-14-supply-adapter\"\u003eSupply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProvides a fixed VTref level, 1.2V to 5.0V, in place of the target's VTref\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Signal Smoothing Adapter for \u003cspan data-ds-price=\"segger-8-6-12-signal-smoothing-adapter\"\u003e£60\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/signal-smoothing-adapter\/\"\u003eSEGGER Signal Smoothing Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Signal_Integrity\"\u003eSEGGER Knowledge Base: Signal Integrity\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172997343,"sku":"8.06.12","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-12-40213032239327.jpg?v=1689526570"},{"product_id":"segger-8-06-17-silabs-c2-adapter","title":"Adaptateur SEGGER SiLabs C2","description":"\u003cp\u003eThe SEGGER SiLabs C2 Adapter (part number 8.06.17) makes debug connections between a J-Link or Flasher and target hardware with the Silicon Labs C2 debug interface. It adapts the standard J-Link 20-pin 0.1\" connector to a 10-pin 0.1\" connector pinout that is compatible with Silicon Labs evaluation boards.\u003c\/p\u003e\n\n\u003ch2\u003eSilicon Labs C2 Debug from a Standard J-Link\u003c\/h2\u003e\n\u003cp\u003eSilicon Labs C2 is one of the target interfaces of current J-Link BASE hardware, and SEGGER's supported cores list for J-Link includes Silicon Labs EFM8. This adapter does the physical conversion, so a J-Link or Flasher with the 20-pin connector can plug into the 10-pin C2 header on a Silicon Labs evaluation board or on your own design using the same pinout. Probe-side pin assignments are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS. SEGGER's schematic for the adapter includes a table of resistor values by VTref voltage.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.17\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003e10-pin, 0.1\" (2.54mm), Silicon Labs evaluation board pinout\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eSilicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable J-Link models\u003c\/th\u003e\n\u003ctd\u003ePro PoE, Pro, Ultra, WiFi, PLUS (Classic and Compact), BASE (Classic and Compact)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSuitable Flasher models\u003c\/th\u003e\n\u003ctd\u003ePro, Pro XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x SiLabs C2 Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFor the Silicon Labs C2 interface and the 10-pin evaluation board pinout only.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes the target pinout and the resistor table as images only, not as text.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSiLabs C2 Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSiLabs C2 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eSilicon Labs C2\u003c\/td\u003e\n\u003ctd\u003e10-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-17-silabs-c2-adapter\"\u003e£75\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-23-microchip-2-wire-jtag-tdi-adapter\"\u003eMicrochip 2-Wire JTAG TDI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMicrochip 2-wire JTAG, IS208x MCUs\u003c\/td\u003e\n\u003ctd\u003e6-pin single row 0.1\"\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-23-microchip-2-wire-jtag-tdi-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-10-renesas-rx-fine-adapter\"\u003eRX FINE Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas FINE\u003c\/td\u003e\n\u003ctd\u003e14-pin 0.1\" Renesas\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-10-renesas-rx-fine-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the SiLabs C2 Adapter for \u003cspan data-ds-price=\"segger-8-06-17-silabs-c2-adapter\"\u003e£75\u003c\/span\u003e ex VAT. Check your Silicon Labs part against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/silabs-c2-adapter\/\"\u003eSEGGER SiLabs C2 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003eSEGGER J-Link BASE product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173030111,"sku":"8.06.17","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-17-40213034500319.jpg?v=1689526558"},{"product_id":"segger-8-06-14-supply-adapter","title":"Adaptateur d'alimentation SEGGER","description":"\u003cp\u003eThe SEGGER Supply Adapter (part number 8.06.14) provides a fixed I\/O voltage level for VTref, adjustable from 1.2V to 5.0V and set to 3.3V by default, so the target board does not need to supply VTref on pin 1. It sits between a J-Link or Flasher and the target on a standard 20-pin 0.1\" socket and header, with all other signals passed through 1:1.\u003c\/p\u003e\n\n\u003ch2\u003eFixed VTref Without a Target Connection\u003c\/h2\u003e\n\u003cp\u003eJ-Link uses VTref (pin 1) to detect whether the target has power, to set the logic-level reference for its inputs and to drive its outputs to the target; it is normally fed from Vdd of the target board. Where the target cannot provide it, the Supply Adapter generates the level on board instead, which reduces the wiring needed on the target. Pin assignments for the standard J-Link 20-pin 0.1\" connector are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eVoltage Set by a Single Resistor\u003c\/h2\u003e\n\u003cp\u003eThe I\/O voltage is selected by one SMD 0603 resistor, so changing it from the 3.3V default needs soldering. SEGGER's schematic shows a voltage regulator (MCP1826T) generating the level.\u003c\/p\u003e\n\u003cp\u003eSEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact), and for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS. The J-Link \/ J-Trace User Guide points to it in its section on VTref.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.14\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eFixed VTref (I\/O voltage) level in place of the target's VTref\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eI\/O voltage range\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5.0V, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDefault I\/O voltage\u003c\/th\u003e\n\u003ctd\u003e3.3V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVoltage setting\u003c\/th\u003e\n\u003ctd\u003eSingle SMD 0603 resistor (soldering required)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" socket and header\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignal mapping\u003c\/th\u003e\n\u003ctd\u003e1:1 except VTref (pin 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter; the Supply Adapter itself is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eChanging the I\/O voltage needs a resistor change and soldering.\u003c\/li\u003e\n  \u003cli\u003eSEGGER describes it as a source for the VTref I\/O level, not as a target power supply. For target power, see the Target Supply Adapter or 5V Target Supply Adapter.\u003c\/li\u003e\n  \u003cli\u003eNo J-Link EDU models are on SEGGER's suitable products list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSupply Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eWhat it supplies\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupply Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eFixed VTref level, 1.2V to 5.0V, in place of the target's VTref\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-18-target-supply-adapter\"\u003eTarget Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable supply voltage to the target\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-29-5v-target-supply-adapter\"\u003e5V Target Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed 5V supply to the target\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-29-5v-target-supply-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-30-programming-voltage-adapter\"\u003eProgramming Voltage Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProgramming and target supply voltages, 4V to 20V, from an external supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-30-programming-voltage-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Supply Adapter for \u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/supply-adapter\/\"\u003eSEGGER Supply Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08001_J-Link_\/_J-Trace_User_Guide\"\u003eSEGGER Knowledge Base: UM08001 J-Link \/ J-Trace User Guide\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173062879,"sku":"8.06.14","price":81.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-14-40213038563551.jpg?v=1689526741"},{"product_id":"segger-8-06-18-target-supply-adapter","title":"SEGGER Target Supply Adapter, alimentation réglable pour sondes de débogage J-Link","description":"\u003cp\u003eLe SEGGER Target Supply Adapter (référence 8.06.18) alimente une carte cible sous une tension réglable de 0,8 V à 3,6 V, fixée à 3,3 V par défaut, avec jusqu'à 400 mA à 3,3 V et 3,6 V. Il se place entre un J-Link ou un Flasher et le câble de débogage, avec une embase femelle 20 broches au pas de 0,1\" côté sonde et un connecteur mâle 20 broches au pas de 0,1\" côté cible, et transmet tous les signaux de débogage en 1:1. Il convient à la mise en route et à la programmation de cartes basse tension qui ne disposent pas de leur propre alimentation sur le banc.\u003c\/p\u003e\n\n\u003ch2\u003eAlimentation cible réglable de 0,8 V à 3,6 V via le connecteur de débogage\u003c\/h2\u003e\n\u003cp\u003eLa tension de sortie est définie par une seule résistance CMS au format 0805 : pour la modifier par rapport aux 3,3 V par défaut, il faut souder une autre valeur. Le courant disponible diminue avec la tension de sortie : 400 mA à 3,6 V et 3,3 V, 300 mA à 2,5 V, 200 mA à 1,8 V et 150 mA à 1,0 V. SEGGER précise que le dépassement de ces valeurs endommage l'adaptateur ; vérifiez donc la consommation de votre carte à sa tension d'alimentation avant de la brancher.\u003c\/p\u003e\n\u003cp\u003eLes deux côtés utilisent le connecteur standard J-Link 20 broches au pas de 0,1\" présent sur la plupart des modèles J-Link. Les affectations des broches et les options d'adaptateurs figurent dans notre guide \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eBrochage du connecteur 20 broches SEGGER J-Link\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Link et Flasher\u003c\/h2\u003e\n\u003cp\u003eSEGGER indique les J-Link PRO PoE, J-Link PRO, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic et Compact, et J-Link BASE Classic et Compact, ainsi que les Flasher PRO, Flasher PRO XL, Flasher Compact et Flasher Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cp\u003eSEGGER ne publie pas de liste de colisage pour cet adaptateur. La commande porte sur le Target Supply Adapter lui-même.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnecteur côté sonde\u003c\/th\u003e\n\u003ctd\u003eEmbase femelle 20 broches 0,1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnecteur côté cible\u003c\/th\u003e\n\u003ctd\u003eConnecteur mâle 20 broches 0,1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAcheminement des signaux\u003c\/th\u003e\n\u003ctd\u003e1:1 pour tous les signaux de débogage\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTension d'alimentation de la cible\u003c\/th\u003e\n\u003ctd\u003e0,8 V à 3,6 V, réglable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTension d'alimentation par défaut\u003c\/th\u003e\n\u003ctd\u003e3,3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCourant de sortie maximal\u003c\/th\u003e\n\u003ctd\u003e400 mA à 3,6 V et 3,3 V ; 300 mA à 2,5 V ; 200 mA à 1,8 V ; 150 mA à 1,0 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRéglage de la tension\u003c\/th\u003e\n\u003ctd\u003eUne résistance, CMS 0805, soudure nécessaire\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eModèles J-Link compatibles\u003c\/th\u003e\n\u003ctd\u003ePRO PoE, PRO, Ultra, WiFi, PLUS Classic et Compact, BASE Classic et Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eModèles Flasher compatibles\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIl n'y a ni interrupteur ni cavalier ; une tension autre que 3,3 V nécessite de remplacer une résistance par soudure.\u003c\/li\u003e\n  \u003cli\u003eLe courant disponible baisse aux tensions plus faibles, jusqu'à 150 mA à 1,0 V. Le dépassement des valeurs nominales endommage l'adaptateur.\u003c\/li\u003e\n  \u003cli\u003eLa plage s'arrête à 3,6 V. Pour une alimentation cible fixe de 5 V, utilisez le 5V Target Supply Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLe Target Supply Adapter comparé aux adaptateurs SEGGER similaires\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdaptateur\u003c\/th\u003e\n\u003cth\u003eFonction\u003c\/th\u003e\n\u003cth\u003eSortie\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTarget Supply Adapter (ce produit)\u003c\/td\u003e\n\u003ctd\u003eAlimentation cible réglable, signaux de débogage en 1:1\u003c\/td\u003e\n\u003ctd\u003e0,8 V à 3,6 V, 3,3 V par défaut, jusqu'à 400 mA\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-29-5v-target-supply-adapter\"\u003e5V Target Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAlimentation cible fixe, signaux de débogage en 1:1\u003c\/td\u003e\n\u003ctd\u003e5 V ±5 %\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-29-5v-target-supply-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-14-supply-adapter\"\u003eSupply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTension d'E\/S VTref fixe, la cible n'a donc pas à alimenter la broche 1\u003c\/td\u003e\n\u003ctd\u003e1,2 V à 5,0 V, réglée par changement de résistance\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-14-supply-adapter\"\u003e£81\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-36-test-farm-power-adapter\"\u003eTest Farm Power Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMise sous\/hors tension à distance de la cible via USB\u003c\/td\u003e\n\u003ctd\u003e5 V, environ 250 mA depuis le J-Link ; 1 A et plus avec une alimentation externe\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-36-test-farm-power-adapter\"\u003e£110\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eCommandez le Target Supply Adapter pour \u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e HT. Comparez la consommation de votre carte à sa tension d'alimentation avec les valeurs ci-dessus, ou demandez-nous un devis formel. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003esondes de débogage SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière révision le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/target-supply-adapter\/\"\u003ePage produit SEGGER Target Supply Adapter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eVue d'ensemble des adaptateurs SEGGER J-Link\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08001_J-Link_\/_J-Trace_User_Guide\"\u003eBase de connaissances SEGGER : UM08001 J-Link \/ J-Trace User Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173095647,"sku":"8.06.18","price":84.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-18-40213037482207.jpg?v=1689526737"},{"product_id":"segger-8-06-36-test-farm-power-adapter","title":"Adaptateur secteur pour ferme d'essai SEGGER","description":"\u003cp\u003eThe SEGGER Test Farm Power Adapter (part number 8.06.36) lets target power supplied through a USB connector be switched on and off remotely with J-Link software, while the debug signals stay connected. It sits between the J-Link and the debug cable on 20-pin 0.1\" connectors and powers the target from a USB-A port: 5V at around 250mA from the J-Link, or 1A and more from an external USB supply on its Micro USB input. SEGGER pairs it with Ethernet-capable probes such as the J-Link PRO for building test farms.\u003c\/p\u003e\n\n\u003ch2\u003eRemote Power Cycling for Board Farms and CI\u003c\/h2\u003e\n\u003cp\u003eIn a test farm, evaluation boards, prototypes, production boards or finished products are connected to the network through debug probes, so testers and developers can reach them remotely. The adapter adds power control to each node: a target can be switched off to save energy, or power-cycled for an automated reboot. SEGGER names regression testing, continuous integration and compiler tests, and compatibility testing of wireless protocols such as Wi-Fi, Zigbee and Matter across several identical or mixed targets. SEGGER's Knowledge Base Test Farm example uses J-Link PRO PoE probes on the LAN.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Power Sources, One USB-A Output\u003c\/h2\u003e\n\u003cp\u003eAll debug signals pass through 1:1 except pin 19, which carries the target supply. Target power leaves the adapter on a power-only USB 2.0 Type-A host connector. Powered from the J-Link, the output is boosted to 5V and limited to around 250mA. With an external source such as a USB hub or wall adapter on the Micro USB connector, 1A and more is possible. The probe side uses the standard J-Link 20-pin 0.1\" connector found on most J-Link models; see our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the Test Farm Power Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" socket\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" header\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignal routing\u003c\/th\u003e\n\u003ctd\u003e1:1 for all debug signals except pin 19 (target supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget power output\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Type-A host connector, power only\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutput when powered by J-Link\u003c\/th\u003e\n\u003ctd\u003e5V (boosted), limited to around 250mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutput with external supply\u003c\/th\u003e\n\u003ctd\u003e1A and more\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExternal supply input\u003c\/th\u003e\n\u003ctd\u003eMicro USB, from a USB hub or wall adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower control\u003c\/th\u003e\n\u003ctd\u003eRemote on\/off using J-Link software\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePowered from the J-Link alone, the output is limited to around 250mA; targets that need more require an external USB supply on the Micro USB input.\u003c\/li\u003e\n  \u003cli\u003eThe switched supply reaches the target through the USB-A connector, so the target must take its power from USB.\u003c\/li\u003e\n  \u003cli\u003eThe debug signals stay connected while power is off. To disconnect the programmer's signals from the target fully, SEGGER offers the Relay Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTest Farm Power Adapter Compared with Related SEGGER Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003cth\u003eTarget power\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTest Farm Power Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eRemote on\/off of target power over USB\u003c\/td\u003e\n\u003ctd\u003e5V, around 250mA from J-Link; 1A and more with an external supply\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-36-test-farm-power-adapter\"\u003e£110\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-41-relay-adapter-uk\"\u003eRelay Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRelay contacts fully disconnect Flasher signals from the target, for automated test setups\u003c\/td\u003e\n\u003ctd\u003eNot a supply adapter\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-41-relay-adapter-uk\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-18-target-supply-adapter\"\u003eTarget Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable target supply, debug signals 1:1\u003c\/td\u003e\n\u003ctd\u003e0.8V to 3.6V, up to 400mA\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-18-target-supply-adapter\"\u003e£84\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-29-5v-target-supply-adapter\"\u003e5V Target Supply Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed target supply, debug signals 1:1\u003c\/td\u003e\n\u003ctd\u003e5V ±5%\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-29-5v-target-supply-adapter\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Test Farm Power Adapter for \u003cspan data-ds-price=\"segger-8-06-36-test-farm-power-adapter\"\u003e£110\u003c\/span\u003e ex VAT. Pair it with a networked probe such as the \u003ca href=\"\/fr\/products\/segger-j-link-pro-debugger-programmer-8-12-00\"\u003eJ-Link PRO\u003c\/a\u003e, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/test-farm-power-adapter\/\"\u003eSEGGER Test Farm Power Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Test_Farm\"\u003eSEGGER Knowledge Base: Test Farm\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173128415,"sku":"8.06.36","price":110.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-36-40212789166303.jpg?v=1689516315"},{"product_id":"segger-8-06-19-xilinx-adapter","title":"Adaptateur SEGGER Xilinx","description":"\u003cp\u003eThe SEGGER Xilinx Adapter (part number 8.06.19) connects a J-Link or Flasher to the 14-pin 2mm Xilinx JTAG connector, giving debug access to FPGA-based MCU cores such as the ARM Cortex-A9 core in Zynq devices. It plugs onto the standard J-Link 20-pin 0.1\" connector found on most J-Link models and carries the VTREF, TDI, TMS, TCK, TDO and HALT signals to the Xilinx header.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link Debug Access to Zynq Cortex-A9 Through the Xilinx JTAG Header\u003c\/h2\u003e\n\u003cp\u003eWhere a Zynq board brings JTAG out on the 14-pin 2mm Xilinx connector rather than an ARM-defined header, the adapter lets a J-Link debug the Cortex-A9 core from that connector directly, with no hand-wired harness. SEGGER's pinout drawing for the Xilinx side labels VTREF, TDI, TMS, TCK, TDO and HALT. Pin assignments for the probe side are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible J-Link and Flasher Models\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the J-Link PRO PoE, J-Link PRO, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact for debugging, and the Flasher PRO, Flasher PRO XL, Flasher Compact and Flasher Portable PLUS for programming.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the Xilinx Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003eJ-Link 20-pin 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003eXilinx JTAG, 14-pin, 2mm pitch\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side signals\u003c\/th\u003e\n\u003ctd\u003eVTREF, TDI, TMS, TCK, TDO, HALT\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTargets\u003c\/th\u003e\n\u003ctd\u003eFPGA-based MCU cores, such as the ARM Cortex-A9 in Zynq devices\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003ePRO PoE, PRO, Ultra, WiFi, PLUS Classic and Compact, BASE Classic and Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJTAG only; SEGGER's pinout carries no SWD or trace signals.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no electrical specification beyond the connector type and pitch.\u003c\/li\u003e\n  \u003cli\u003eIt fits the 14-pin 2mm Xilinx header only. For the 10-pin Intel FPGA JTAG connector, use the Intel FPGA Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eXilinx Adapter Compared with Related SEGGER Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eInterface and targets\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eXilinx Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e14-pin 2mm Xilinx JTAG\u003c\/td\u003e\n\u003ctd\u003eJTAG; FPGA-based cores such as Zynq Cortex-A9\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-15-intel-fpga-adapter\"\u003eIntel FPGA Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin 100-mil Intel FPGA JTAG\u003c\/td\u003e\n\u003ctd\u003eJTAG; FPGA-based MCU cores such as Cyclone V\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-15-intel-fpga-adapter\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-03-14-pin-ti-adapter\"\u003e14-Pin TI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin TI JTAG\u003c\/td\u003e\n\u003ctd\u003eJTAG; TI MCU targets\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-03-14-pin-ti-adapter\"\u003e£62\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-00-19-pin-cortex-m-adapter\"\u003e19-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19-pin 0.05\" Samtec FTSH\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD and SWO; Cortex-M targets\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-00-19-pin-cortex-m-adapter\"\u003e£38\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Xilinx Adapter for \u003cspan data-ds-price=\"segger-8-06-19-xilinx-adapter\"\u003e£60\u003c\/span\u003e ex VAT. Check that your board carries the 14-pin 2mm Xilinx JTAG header, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/xilinx-adapter\/\"\u003eSEGGER Xilinx Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08001_J-Link_\/_J-Trace_User_Guide\"\u003eSEGGER Knowledge Base: UM08001 J-Link \/ J-Trace User Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173161183,"sku":"8.06.19","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-19-40213036237023.jpg?v=1689526562"},{"product_id":"segger-8-07-00-jtag-isolator-adapter","title":"Isolateur JTAG SEGGER J-Link","description":"\u003cp\u003eThe SEGGER J-Link JTAG Isolator (part number 8.07.00) is an isolator box that sits between a J-Link or Flasher and the target, giving 1kV DC basic isolation on JTAG at up to 4 MHz for target interface voltages from 1.2V to 5V. Both sides use 20-pin 0.1\" male JTAG connectors; the isolator is powered from the probe side and draws less than 25µA on the target side. Use it where the debug or production tools do not share a ground with the application.\u003c\/p\u003e\n\n\u003ch2\u003eJTAG Isolation for Motor Control, Sensor and Analogue Designs\u003c\/h2\u003e\n\u003cp\u003eSEGGER describes isolation as essential when the development or production tools are not connected to the same ground as the application. Motor control applications tend to introduce electrical spikes, and the isolator keeps them away from the probe. In sensor and analogue designs, it keeps the debug system from disturbing the measurement. The isolator uses high-speed digital isolators and passes TRST, TDI, TMS, TCK, RTCK, TDO and RESET.\u003c\/p\u003e\n\u003cp\u003eProtection includes overvoltage and overcurrent protection on the probe side, overvoltage protection on the target VTref pin and ESD protection. Four LEDs show probe or programmer power, probe or programmer overload, target power and target RESET. On the target side, SEGGER's Knowledge Base lists pins 1 and 2 as VCC, through which the target side draws its power, with pins 17 and 19 not connected. See our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide for the probe side.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJTAG Isolator Box\u003c\/li\u003e\n  \u003cli\u003e0.1\" 20-pin ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e1kV DC, basic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eTRST, TDI, TMS, TCK, RTCK, TDO, RESET\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" male JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" male JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003ePowered from the probe side\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side power consumption\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e73mm x 46mm x 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003ePRO PoE, PRO, Ultra, WiFi, PLUS, BASE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo SWD and no cJTAG: the isolator does not support bidirectional transmission on SWDIO or TMSC. Use the SWD Isolator for SWD.\u003c\/li\u003e\n  \u003cli\u003eTarget interface speed is limited to 4 MHz.\u003c\/li\u003e\n  \u003cli\u003eBasic isolation only. Do not use it with hazardous voltages without a further protection measure such as double or reinforced isolation.\u003c\/li\u003e\n  \u003cli\u003eThird-party probes with the same pinout must supply 5V on pin 19; SEGGER states their use is at your own risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJTAG Isolator Compared with Other SEGGER Isolators\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolator\u003c\/th\u003e\n\u003cth\u003eIsolated link\u003c\/th\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003cth\u003eMax. speed\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJTAG Isolator (this product)\u003c\/td\u003e\n\u003ctd\u003eProbe to target, JTAG, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-01-swd-isolator-adapter\"\u003eSWD Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProbe to target, SWD and SWO, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-02-usb-isolator-adapter\"\u003eUSB Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHost PC to probe, USB\u003c\/td\u003e\n\u003ctd\u003e3kV DC for 1s, basic\u003c\/td\u003e\n\u003ctd\u003eUSB Full-Speed, 12 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-02-usb-isolator-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-10-j-trace-isolator-adapter\"\u003eJ-Trace Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eJ-Trace to target, JTAG, SWD, SWO and ETM trace, 19-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz debug, 75 MHz trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the JTAG Isolator for \u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e ex VAT. Confirm that your target debugs over JTAG at 4 MHz or below, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-jtag-isolator\/\"\u003eSEGGER JTAG Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_-_Hardware\"\u003eSEGGER Knowledge Base: Flasher Hardware (JTAG Isolator pinout)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-swd-isolator\/\"\u003eSEGGER SWD Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-usb-isolator\/\"\u003eSEGGER USB Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/isolators\/j-trace-isolator\/\"\u003eSEGGER J-Trace Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173193951,"sku":"8.07.00","price":226.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-07-00-jtag-isolator-adapter-segger-8-07-00-debug-store-uk-42705861738719.png?v=1718110185"},{"product_id":"segger-8-07-01-swd-isolator-adapter","title":"Adaptateur d'isolateur SEGGER SWD","description":"\u003cp\u003eThe SEGGER SWD Isolator (part number 8.07.01) is an isolator box that sits between a J-Link or Flasher and the target, giving 1kV DC basic isolation on SWD, including SWO, at up to 4 MHz for target interface voltages from 1.2V to 5V. Both sides use 20-pin 0.1\" male SWD connectors; the isolator is powered from the probe side and draws less than 25µA on the target side. Use it where the debug or production tools do not share a ground with the application.\u003c\/p\u003e\n\n\u003ch2\u003eSWD Isolation for Motor Control, Sensor and Analogue Designs\u003c\/h2\u003e\n\u003cp\u003eSEGGER describes isolation as essential when the development or production tools are not connected to the same ground as the application. Motor control applications tend to introduce electrical spikes, and the isolator keeps them away from the probe; in sensor and analogue designs it keeps the debug system from disturbing the measurement. The isolator uses high-speed digital isolators for low propagation delay and passes SWCLK, SWDIO, SWO and RESET.\u003c\/p\u003e\n\u003cp\u003eThe probe side powers the isolator through pin 19, and the target side draws its power through VTref on pin 1; pin 19 is not connected on the target side. Pins 4, 6, 8, 10, 12, 14, 16, 18 and 20 are GND. Protection covers overvoltage and overcurrent on the probe side, overvoltage on the target VTref pin, and ESD. Four LEDs show probe or programmer power, probe or programmer overload, target power and target RESET. See our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide for the probe side.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSWD Isolator Box\u003c\/li\u003e\n  \u003cli\u003e0.1\" 20-pin ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e1kV DC, basic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eSWD with SWO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eSWCLK, SWDIO, SWO, RESET\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" male SWD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" male SWD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eFrom the probe side via pin 19; target side via VTref (pin 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side power consumption\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e73mm x 46mm x 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003ePRO PoE, PRO, Ultra, WiFi, PLUS, BASE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo JTAG, because there is no TDI connection. Use the JTAG Isolator for JTAG targets.\u003c\/li\u003e\n  \u003cli\u003ecJTAG works only if the probe uses the J-Link configuration, with TMSC on pin 7.\u003c\/li\u003e\n  \u003cli\u003eTarget interface speed is limited to 4 MHz.\u003c\/li\u003e\n  \u003cli\u003eBasic isolation only. Do not use it with hazardous voltages without a further protection measure such as double or reinforced isolation.\u003c\/li\u003e\n  \u003cli\u003eThird-party probes with the same pinout must supply 5V on pin 19; SEGGER states their use is at your own risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSWD Isolator Compared with Other SEGGER Isolators\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolator\u003c\/th\u003e\n\u003cth\u003eIsolated link\u003c\/th\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003cth\u003eMax. speed\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSWD Isolator (this product)\u003c\/td\u003e\n\u003ctd\u003eProbe to target, SWD and SWO, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-00-jtag-isolator-adapter\"\u003eJTAG Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProbe to target, JTAG, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-02-usb-isolator-adapter\"\u003eUSB Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHost PC to probe, USB\u003c\/td\u003e\n\u003ctd\u003e3kV DC for 1s, basic\u003c\/td\u003e\n\u003ctd\u003eUSB Full-Speed, 12 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-02-usb-isolator-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-10-j-trace-isolator-adapter\"\u003eJ-Trace Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eJ-Trace to target, JTAG, SWD, SWO and ETM trace, 19-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz debug, 75 MHz trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the SWD Isolator for \u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e ex VAT. Confirm that your target debugs over SWD at 4 MHz or below, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-swd-isolator\/\"\u003eSEGGER SWD Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-jtag-isolator\/\"\u003eSEGGER JTAG Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-usb-isolator\/\"\u003eSEGGER USB Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/isolators\/j-trace-isolator\/\"\u003eSEGGER J-Trace Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173226719,"sku":"8.07.01","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-07-01-segger-swd-isolator-adapter-8-07-01-42714419298527.png?v=1722900541"},{"product_id":"segger-8-07-02-usb-isolator-adapter","title":"Adaptateur isolateur USB SEGGER","description":"\u003cp\u003eThe SEGGER USB Isolator (part number 8.07.02) sits in the USB link between the host PC and a J-Link or Flasher, giving 3kV DC basic isolation (for 1s) between the probe and the host. It runs the connection at USB Full-Speed (12 Mbit\/s) with a maximum propagation delay of 70ns, and supplies the probe with up to 200mA. It suits setups where the PC and the target application are not on the same ground, and it protects the probe from electrical spikes and from the overvoltage that low-budget USB hubs can cause.\u003c\/p\u003e\n\n\u003ch2\u003eHost-Side Isolation Without Slowing the Debug Link\u003c\/h2\u003e\n\u003cp\u003eIsolating on the host side forces the PC to talk to the probe at USB Full-Speed. SEGGER states that this does not, or not significantly, reduce debug and flash programming speed. The 70ns propagation delay is treated as one additional USB hub. Host-side isolation works with every debug interface the probe supports, including JTAG, SWD (with or without SWO), FINE, C2 and UART, and it isolates both the probe and the target from the PC. Where USB Hi-Speed (480 Mbit\/s) is needed, isolate on the target side instead with the JTAG or SWD Isolator, which typically limits the target-side debug speed.\u003c\/p\u003e\n\n\u003ch2\u003eConnectors, Indicators and Protection\u003c\/h2\u003e\n\u003cp\u003eA USB Micro-B connector faces the PC and a USB Type-A connector faces the J-Link or Flasher. A green PWR LED shows the isolator is powered and can supply the probe side; a red\/orange OVL LED shows overload when the probe draws too much current. The isolator has short-circuit protection.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no package list for the USB Isolator. You receive the isolator itself. SEGGER does not say whether a USB Micro-B cable for the host side is supplied, so ask us before ordering if you need one.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e3kV DC for 1s, basic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUSB speed\u003c\/th\u003e\n\u003ctd\u003eUSB Full-Speed, 12 Mbit\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePropagation delay\u003c\/th\u003e\n\u003ctd\u003e70ns max. (counts as one additional hub)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. output current to probe\u003c\/th\u003e\n\u003ctd\u003e200mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost-side connector\u003c\/th\u003e\n\u003ctd\u003eUSB Micro-B\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe-side connector\u003c\/th\u003e\n\u003ctd\u003eUSB Type-A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIndicators\u003c\/th\u003e\n\u003ctd\u003ePWR (green), OVL overload (red\/orange)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eShort-circuit protection\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003ePRO, Ultra, WiFi, PLUS Classic and Compact, BASE Classic and Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003ePRO, PRO XL, Compact, Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe host link runs at USB Full-Speed only. For Hi-Speed USB, isolate on the target side with the JTAG or SWD Isolator.\u003c\/li\u003e\n  \u003cli\u003eThe connected probe may draw no more than 200mA.\u003c\/li\u003e\n  \u003cli\u003eOn a J-Link PRO V4 or J-Link ULTRA+ V4, apply firmware updates with the isolator removed. SEGGER reports that these two models can lose communication during a firmware update made through the USB Isolator; refit it once the update has finished.\u003c\/li\u003e\n  \u003cli\u003eBasic isolation only. Do not use it with hazardous voltages without a further protection measure such as double or reinforced isolation.\u003c\/li\u003e\n  \u003cli\u003eSEGGER does not support other vendors' USB isolators with J-Link; their use is at your own risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUSB Isolator Compared with Other SEGGER Isolators\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolator\u003c\/th\u003e\n\u003cth\u003eIsolated link\u003c\/th\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003cth\u003eMax. speed\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eUSB Isolator (this product)\u003c\/td\u003e\n\u003ctd\u003eHost PC to probe, USB\u003c\/td\u003e\n\u003ctd\u003e3kV DC for 1s, basic\u003c\/td\u003e\n\u003ctd\u003eUSB Full-Speed, 12 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-02-usb-isolator-adapter\"\u003e£185\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-00-jtag-isolator-adapter\"\u003eJTAG Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProbe to target, JTAG, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-01-swd-isolator-adapter\"\u003eSWD Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eProbe to target, SWD and SWO, 20-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-10-j-trace-isolator-adapter\"\u003eJ-Trace Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eJ-Trace to target, JTAG, SWD, SWO and ETM trace, 19-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e1kV DC, basic\u003c\/td\u003e\n\u003ctd\u003e4 MHz debug, 75 MHz trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the USB Isolator for \u003cspan data-ds-price=\"segger-8-07-02-usb-isolator-adapter\"\u003e£185\u003c\/span\u003e ex VAT. Check that your probe is among the compatible models in the specifications above, such as the \u003ca href=\"\/fr\/products\/segger-8-08-00-j-link-base-classic\"\u003eJ-Link BASE Classic\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/segger-5-17-01-flasher-pro-programmer\"\u003eFlasher PRO\u003c\/a\u003e, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-usb-isolator\/\"\u003eSEGGER USB Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-jtag-isolator\/\"\u003eSEGGER JTAG Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-swd-isolator\/\"\u003eSEGGER SWD Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/isolators\/j-trace-isolator\/\"\u003eSEGGER J-Trace Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_no_USB_enumeration\"\u003eSEGGER Knowledge Base: J-Link no USB enumeration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173259487,"sku":"8.07.02","price":185.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-07-02-segger-usb-isolator-adapter-8-07-02-42710005416159.png?v=1722901620"},{"product_id":"segger-8-07-10-j-trace-isolator-adapter","title":"Adaptateur d'isolateur SEGGER J-Trace","description":"\u003cp\u003eThe SEGGER J-Trace Isolator (part number 8.07.10) provides 1 kV DC basic electrical isolation between a J-Trace PRO and a target with the standard 0.05\" 19-pin Cortex-M connector, while passing JTAG, SWD and ETM trace. It works with 1.2V to 5V targets, at JTAG and SWD speeds up to 4 MHz and trace clocks up to 75 MHz. It is for trace and debug work where the probe and the target must be kept electrically separate.\u003c\/p\u003e\n\n\u003ch2\u003eIsolated ETM Trace on the 19-Pin Cortex-M Connector\u003c\/h2\u003e\n\u003cp\u003eBoth sides of the isolator use a 0.05\" 19-pin Cortex-M male connector: EMULATOR connects to the J-Trace cable and TARGET to the target cable. ETM trace pins are fully supported, with TRACECLK and TRACEDATA0 to TRACEDATA3 carried through high-speed digital isolators. SEGGER rates the trace clock at up to 75 MHz, the limit of the isolator IC, and reports up to 120 MHz in one example setup at room temperature with adjusted sampling delays in the J-Trace PRO.\u003c\/p\u003e\n\n\u003ch2\u003ePowered from the J-Trace PRO\u003c\/h2\u003e\n\u003cp\u003eThe probe powers the isolator logic through pins 11 and 13, so the J-Trace PRO must supply 5V there; SEGGER notes that you may need to run \"power on perm\" once in J-Link Commander. The target side draws only a few microamps (under 25 µA). Three LEDs show emulator power, target power and target RESET.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Trace Isolator\u003c\/li\u003e\n  \u003cli\u003e20-pin target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e1 kV DC, basic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003eEMULATOR and TARGET, each 0.05\" 19-pin Cortex-M male\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eJTAG frequency\u003c\/th\u003e\n\u003ctd\u003eUp to 4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWD frequency\u003c\/th\u003e\n\u003ctd\u003eUp to 4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace clock\u003c\/th\u003e\n\u003ctd\u003eUp to 75 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace signals\u003c\/th\u003e\n\u003ctd\u003eTRACECLK, TRACEDATA0 to TRACEDATA3\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eFrom the probe, 5V on pins 11 and 13; under 25 µA from target\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIndicators\u003c\/th\u003e\n\u003ctd\u003eEmulator power (green), target power (green), target RESET (red)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDesigned for\u003c\/th\u003e\n\u003ctd\u003eJ-Trace V2 or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic isolation only. SEGGER requires double or reinforced isolation to protect people from hazardous voltages, so do not rely on the isolator alone in that case.\u003c\/li\u003e\n  \u003cli\u003eJTAG and SWD are limited to 4 MHz, and trace clocks above 75 MHz are beyond the isolator IC's specification.\u003c\/li\u003e\n  \u003cli\u003eVTref (pin 1) must have no series resistor, and pin 9 should be left open on the target.\u003c\/li\u003e\n  \u003cli\u003eOther ARM emulators with the same pinout need 5V on pin 19 of the emulator connector; SEGGER states this is at your own risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace Isolator Compared with the J-Link Isolators\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eIsolator\u003c\/th\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace Isolator (this product)\u003c\/td\u003e\n\u003ctd\u003e0.05\" 19-pin Cortex-M\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, up to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eETM, up to 75 MHz trace clock\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-00-jtag-isolator-adapter\"\u003eJ-Link JTAG Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e20-pin 0.1\" JTAG\u003c\/td\u003e\n\u003ctd\u003eJTAG, up to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-00-jtag-isolator-adapter\"\u003e£226\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-07-01-swd-isolator-adapter\"\u003eSWD Isolator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e20-pin 0.1\" SWD\u003c\/td\u003e\n\u003ctd\u003eSWD and SWO, up to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-07-01-swd-isolator-adapter\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the J-Trace Isolator for \u003cspan data-ds-price=\"segger-8-07-10-j-trace-isolator-adapter\"\u003e£320\u003c\/span\u003e ex VAT, or ask us for a formal quotation. SEGGER lists it as suitable for the \u003ca href=\"\/fr\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e, J-Trace PRO Cortex-A\/R\/M, J-Trace PRO Cortex-M and J-Trace PRO RISC-V. See the full \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/isolators\/j-trace-isolator\/\"\u003eSEGGER J-Trace Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/isolators\/j-link-swd-isolator\/\"\u003eSEGGER SWD Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/isolators\/jtag-isolator\/\"\u003eSEGGER JTAG Isolator product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173292255,"sku":"8.07.10","price":320.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-07-10-40213030895839.jpg?v=1689526567"},{"product_id":"segger-5-17-01-flasher-pro-programmer","title":"Programmateur SEGGER Flasher PRO","description":"\u003ch2\u003e Présentation de SEGGER Flasher PRO : l'outil de programmation intégré ultime\u003c\/h2\u003e\n\n \u003cp\u003eLibérez le véritable potentiel de votre PCB avec Flasher PRO de SEGGER, l'outil de programmation en système (ISP) de pointe conçu pour libérer la puissance de la mémoire non volatile. Dites adieu aux limitations et bonjour à la programmation transparente alors que nous redéfinissons la façon dont vous interagissez avec les microcontrôleurs et les SoC. Découvrez la révolution ISP, également connue sous le nom d'ICP ou de programmation en circuit.\u003c\/p\u003e\n\n\u003ch3\u003e Libérez la puissance de la mémoire flash\u003c\/h3\u003e\n\n\u003cp\u003e Avec SEGGER Flasher PRO, vous avez la liberté ultime de programmer une large gamme de mémoires. De la mémoire flash interne des microcontrôleurs et des SoC à la mémoire flash parallèle externe (CFI Flashes) et aux flashs (Q)SPI, notre outil ISP gère tout cela avec précision et facilité. Les flashs (Q)SPI peuvent même être programmés directement en se connectant directement aux broches, garantissant une expérience transparente.\u003c\/p\u003e\n\n\u003ch3\u003e Rapide, robuste, fiable : votre compagnon de programmation de confiance\u003c\/h3\u003e\n\n \u003cp\u003eConçu pour satisfaire et dépasser les normes de l'industrie, le Flasher PRO est rapide, robuste et fiable. Comptez sur ses performances supérieures pour gérer facilement vos besoins de programmation Flash. Que vous ayez besoin du mode autonome ou que vous préfériez fonctionner via votre PC, le Flasher PRO s'adapte sans effort à vos besoins.\u003c\/p\u003e\n\n\u003ch3\u003e Options de connectivité polyvalentes\u003c\/h3\u003e\n\n\u003cp\u003e Bénéficiez d'une grande polyvalence grâce aux options de connectivité flexibles de Flasher PRO. Connectez-vous via USB, Ethernet ou une interface RS232, selon votre configuration et vos besoins. Profitez de la commodité d'un transfert de données transparent, rendant vos tâches de programmation efficaces et sans tracas.\u003c\/p\u003e\n\n\u003ch3\u003e Stockez plus, programmez plus\u003c\/h3\u003e\n\n\u003cp\u003e Le Flasher PRO dispose de 128 Mo de mémoire interne, ce qui offre un espace suffisant pour stocker les images du firmware et les configurations de programmation. Ne vous inquiétez plus de manquer de mémoire lorsque vous travaillez sur vos projets.\u003c\/p\u003e\n\n\u003ch3\u003e L'adaptabilité à son meilleur\u003c\/h3\u003e\n\n \u003cp\u003eLe connecteur cible à 20 broches s'adapte parfaitement à de nombreux connecteurs standards et propriétaires grâce à divers adaptateurs SEGGER. Dites adieu aux problèmes de compatibilité et profitez d'une programmation fluide et ininterrompue.\u003c\/p\u003e\n\n\u003ch3\u003e Prise en charge d'un large éventail d'appareils\u003c\/h3\u003e\n\n\u003cp\u003e Ne laissez pas la compatibilité des appareils limiter vos ambitions. Le Flasher PRO prend en charge un grand nombre de cœurs de processeur et un nombre encore plus grand d'appareils différents de différents fournisseurs. Quelles que soient les exigences de votre projet, notre outil ISP est prêt à les gérer.\u003c\/p\u003e\n\n\u003ch3\u003e Solution multi-plateforme\u003c\/h3\u003e\n\n\u003cp\u003e Flasher PRO ne se limite pas à une seule plateforme. Découvrez sa puissance et sa polyvalence sur Linux, macOS et Windows. Quel que soit l'endroit où vous préférez travailler, nous avons ce qu'il vous faut.\u003c\/p\u003e\n\n\u003cp\u003e Libérez le véritable potentiel de vos efforts de programmation avec Flasher PRO de SEGGER. Dites adieu aux limitations et adoptez l'avenir de la programmation en système. Obtenez le vôtre dès aujourd'hui et prenez le contrôle de votre PCB comme jamais auparavant !\u003c\/p\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173325023,"sku":"5.17.01","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-flasher-pro-5-17-01-perspective-front.png?v=1794818091"},{"product_id":"segger-5-17-02-flasher-pro-xl-programmer","title":"Programmateur SEGGER Flasher PRO XL","description":"\u003cp\u003eThe SEGGER Flasher PRO XL (part number 5.17.02) is a universal in-system flash programmer with 2 GB of internal memory, sixteen times the 128 MB of the Flasher PRO, so it can program devices with up to 2 GB of memory even in stand-alone mode. It keeps the Flasher PRO's 1.2V to 5V target interface, target interface speeds up to 50 MHz and USB, RS232 and Ethernet control. It suits production lines programming Linux kernels, OS images, eMMC memories and SD cards, or holding several firmware variants on one programmer.\u003c\/p\u003e\n\n\u003ch2\u003e2 GB Flash Programmer for Large Images and eMMC\u003c\/h2\u003e\n\u003cp\u003eThe extra memory is aimed at images that do not fit in 128 MB: Linux kernels, OS images and the graphics and media data behind high-resolution GUIs. SEGGER also lists the XL for preparing eMMC memories and SD cards. The 2 GB can hold several firmware images and microcontroller configurations at once, which suits mass customisation where one station builds several product variants. SEGGER states that the larger memory does not slow programming: turbo mode downloads and programs at the same time on MCUs that allow memory access while running.\u003c\/p\u003e\n\n\u003ch2\u003eStand-Alone or PC-Controlled Programming\u003c\/h2\u003e\n\u003cp\u003eProgramming can be started by a button press, a TTL signal, or remotely over USB, UART, RS232 or Ethernet. SEGGER isolates the Ethernet data lines in accordance with IEEE 802.3, tested at 1500 Vrms for one minute. Licences for all supported devices are included in the price, and software, firmware and flash loader updates are free.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Interfaces and Supported Devices\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists tens of thousands of supported devices in hundreds of device families, and new flash loaders arrive with the free software updates. The Knowledge Base lists JTAG, cJTAG, SWD, SWD multi-drop, SPI, QSPI, Microchip PIC32 ICSP, Renesas FINE and Silicon Labs C2 among the supported target interfaces, with Authorized Flashing to limit the number of programming cycles. The target connector is a male 20-pin IDC keyed box header with 0.1\" (2.54mm) pitch; pin assignments and adapter options are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon).\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interfaces\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 High-Speed (USB-C), RS232, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMale 20-pin IDC keyed box header, 0.1\" (2.54mm) pitch, optional adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003e50 MHz (JTAG, SWD)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTRef\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e1.5V to 5V adjustable, max. 400mA (hardware V8; fixed 5V on earlier hardware)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 140mA idle (hardware V8)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget cable length\u003c\/th\u003e\n\u003ctd\u003e20cm recommended and supplied; max. 2m, which may reduce target interface speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSize (without cables)\u003c\/th\u003e\n\u003ctd\u003e130mm x 70mm x 28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e126g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eLess than 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher PRO XL\u003c\/li\u003e\n  \u003cli\u003eUSB-C cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIf your images fit in 128 MB, the Flasher PRO offers the same interfaces and target specification.\u003c\/li\u003e\n  \u003cli\u003eStand-alone mode on ARM Cortex targets is limited to CoreSight SoC-400 DAP setups. Microchip PIC32, Silicon Labs EFM8 and Renesas RH850 G4KH are supported in PC-based mode only.\u003c\/li\u003e\n  \u003cli\u003eThe Flasher is a production programmer, not a debug probe: SEGGER lists no ETB or ETM trace, no Cortex-M monitor mode debugging and no CMSIS-DAP mode.\u003c\/li\u003e\n  \u003cli\u003eMounting brackets are not included; SEGGER sells them separately and publishes files for 3D printing your own.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher PRO XL Compared with Other SEGGER Flasher Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003cth\u003eHost and control interfaces\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher PRO XL (this product)\u003c\/td\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-5-17-01-flasher-pro-programmer\"\u003eFlasher PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-5-19-00-flasher-compact-programmer\"\u003eFlasher Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-5-16-02-flasher-portable-plus-programmer\"\u003eFlasher Portable PLUS\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, 1.8\" colour display\u003c\/td\u003e\n\u003ctd\u003eLi-ion battery or USB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-16-02-flasher-portable-plus-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eProgramming a Linux kernel and OS image for an ARM Cortex-A SoC board on the production line. Preparing eMMC memory for a media-rich display unit whose graphics assets run to hundreds of megabytes. Holding several regional firmware variants on one station so the operator can switch builds without reloading the programmer.\u003c\/p\u003e\n\u003cp\u003eChoose the XL when images or the number of stored variants outgrow 128 MB; otherwise the Flasher PRO is the same programmer with less memory.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Flasher PRO XL for \u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug and programming tools\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 20\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-pro-xl\/\"\u003eSEGGER Flasher PRO XL product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Pro_XL\"\u003eSEGGER Knowledge Base: Flasher Pro XL\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Pro\"\u003eSEGGER Knowledge Base: Flasher Pro\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Pro_XL_V8\"\u003eSEGGER Knowledge Base: Flasher Pro XL V8\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173357791,"sku":"5.17.02","price":1320.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-5-17-02-40212722122975.jpg?v=1689515762"},{"product_id":"segger-5-19-00-flasher-compact-programmer","title":"Programmateur compact SEGGER Flasher","description":"\u003ch2\u003e Présentation de Flasher Compact : votre expérience de solution de programmation Flash autonome\u003c\/h2\u003e\n\n\u003ch3\u003e Programmation Flash en circuit sans effort\u003c\/h3\u003e\n\n \u003cp\u003eFlasher Compact est l'outil de programmation flash en circuit ultime, méticuleusement conçu pour programmer la mémoire interne et externe de votre MCU ou SOC. De plus, il programme de manière transparente une puce mémoire (Q)SPI à laquelle il est directement connecté, vous offrant ainsi un contrôle inégalé sur vos appareils.\u003c\/p\u003e\n\n\u003ch3\u003e Aucun PC requis – Alimentation autonome\u003c\/h3\u003e\n\n\u003cp\u003e Avec Flasher Compact, vous avez le contrôle total, et vous n'avez pas besoin d'un programme PC. Dites adieu aux complexités et profitez de la liberté du mode autonome. Programmez vos appareils sans effort et sans dépendances externes.\u003c\/p\u003e\n\n\u003ch3\u003e Taille compacte, intégration illimitée\u003c\/h3\u003e\n\n\u003cp\u003e Bénéficiez d'une efficacité optimale grâce à la nature compacte et aux trous de montage du Flasher Compact, qui facilitent son intégration dans des configurations de production de taille limitée. Optimisez vos processus et accélérez votre production en toute simplicité. Alimenté par USB - Toujours prêt à l'emploi\u003c\/p\u003e\n\n \u003cp\u003eNe vous inquiétez plus de manquer d'énergie. Flasher Compact est alimenté par USB, ce qui garantit qu'il est toujours prêt à s'attaquer à vos tâches de programmation flash. Où que vous soyez, assurez le bon fonctionnement de votre ligne de production.\u003c\/p\u003e\n\n\u003ch3\u003e Mémoire interne massive de 128 Mo\u003c\/h3\u003e\n\n\u003cp\u003e Flasher Compact dispose d'une impressionnante mémoire interne de 128 Mo, offrant un espace suffisant pour stocker les images du micrologiciel et les configurations de programmation. Stockez vos données vitales en toute sécurité et accédez-y à tout moment. Prise en charge multiplateforme -\u003c\/p\u003e\n\n\u003ch3\u003e Votre choix, votre système\u003c\/h3\u003e\n\n\u003cp\u003e Bénéficiez de la flexibilité de Flasher Compact avec son logiciel complet de configuration et de contrôle disponible pour Windows, Linux et macOS. Passez facilement d'un système d'exploitation à l'autre en fonction de vos préférences.\u003c\/p\u003e\n\n\u003ch3\u003e Restez informé, restez soutenu\u003c\/h3\u003e\n\n\u003cp\u003e Nous vous proposons des mises à jour régulières du logiciel et du micrologiciel. Découvrez les dernières fonctionnalités et améliorations sans frais supplémentaires. Et devinez quoi ? Tous les appareils pris en charge sont inclus, sans frais cachés.\u003c\/p\u003e\n\n\u003ch3\u003e Assurez la pérennité de votre programmation Flash\u003c\/h3\u003e\n\n \u003cp\u003eInvestissez dans Flasher Compact dès aujourd'hui et profitez des avantages d'une prise en charge future d'appareils supplémentaires. À mesure que la technologie évolue, nous veillons à ce que vos besoins en matière de programmation Flash soient satisfaits, vous permettant ainsi de rester à la pointe de l'innovation. Faites le bon choix et optez pour Flasher Compact. Renforcez vos capacités de programmation Flash et portez votre efficacité de production vers de nouveaux sommets.\u003c\/p\u003e\n\n\u003cp\u003e Commandez maintenant et découvrez la puissance transparente de la programmation Flash autonome !\u003c\/p\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173423327,"sku":"5.19.00","price":920.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-5-19-00-40212725399775.jpg?v=1689515404"},{"product_id":"segger-5-16-02-flasher-portable-plus-programmer","title":"SEGGER Flasher Portable PLUS Programmeur","description":"\u003cp\u003eThe SEGGER Flasher Portable PLUS (part number 5.16.02) is a battery-powered handheld flash programmer with a 1.8\" colour screen, 128 MB of internal flash for up to 99 firmware images, a 1.2V to 5V target interface and target interface speeds up to 50 MHz. Its rechargeable lithium-ion battery runs for up to 10 hours, so firmware can be updated in the field without a PC or mains power. It suits service technicians reflashing installed equipment and engineers who need a stand-alone programmer away from the production line.\u003c\/p\u003e\n\n\u003ch2\u003eBattery-Powered Field Service Programmer\u003c\/h2\u003e\n\u003cp\u003eSEGGER built the Portable PLUS for equipment that cannot easily be connected to a network, such as wind turbines, remote installations and industrial machinery in hard-to-reach places. When a firmware issue is found, a technician can apply the patch on site with no PC and no access to a power supply. The battery charges automatically whenever the unit is connected over USB to a host computer or a standard USB power adapter, including a phone charger or power bank; a full charge takes about 70 minutes at 1 A. The unit can also run from USB power.\u003c\/p\u003e\n\n\u003ch2\u003eColour Screen and Stored Firmware Images\u003c\/h2\u003e\n\u003cp\u003eThe 1.8\" 128 x 160 pixel RGB TFT screen gives direct feedback and access to project data. The 128 MB internal flash stores as many as 99 firmware images, so one programmer can cover several products or firmware versions on a service round. Turbo mode downloads and programs at the same time, and SEGGER quotes programming speeds from 30 KB\/s to 1 MB\/s depending on the target hardware.\u003c\/p\u003e\n\n\u003ch2\u003eSupported Devices and Authorized Flashing\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists tens of thousands of supported devices in hundreds of device families, the same library as the other Flasher models, with supported cores including ARM, Cortex, PowerPC and Renesas RX. If the programmer is lost in the field, Authorized Flashing protects your firmware: once the set number of programming cycles is reached, the Flasher stops working for that project. The target connector is a male 20-pin IDC keyed box header with 0.1\" (2.54mm) pitch; pin assignments and adapter options are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon).\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eInternal rechargeable lithium-ion battery, or USB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBattery run time\u003c\/th\u003e\n\u003ctd\u003eUp to 10 hours of continuous use\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharging via USB\u003c\/th\u003e\n\u003ctd\u003e70 minutes at 1 A charging current\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eScreen\u003c\/th\u003e\n\u003ctd\u003e1.8\" 128 x 160 px RGB TFT, LED backlight\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 High-Speed, USB Type B\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMale 20-pin IDC keyed box header, 0.1\" (2.54mm) pitch, optional adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInternal flash memory\u003c\/th\u003e\n\u003ctd\u003e128 MB (TBW: 10 TB), up to 99 firmware images\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgramming speed\u003c\/th\u003e\n\u003ctd\u003e30 KB\/s to 1 MB\/s, depending on target hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTRef\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget cable length\u003c\/th\u003e\n\u003ctd\u003e20cm recommended and supplied; max. 2m, which may reduce target interface speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSize (without cables)\u003c\/th\u003e\n\u003ctd\u003e126mm x 70mm x 28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e140g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C (normal operation); +5°C to +45°C (battery charging)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +45°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eLess than 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher Portable PLUS\u003c\/li\u003e\n  \u003cli\u003eUSB cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo Ethernet or RS232 control. For a production station use the Flasher PRO, or the Flasher Compact inside a fixture.\u003c\/li\u003e\n  \u003cli\u003eBattery charging is limited to +5°C to +45°C, and storage to a maximum of +45°C, narrower than the +5°C to +60°C operating range.\u003c\/li\u003e\n  \u003cli\u003eActual programming speed depends on the target: SEGGER quotes 30 KB\/s to 1 MB\/s.\u003c\/li\u003e\n  \u003cli\u003eThe Renesas FINE interface works only in host-based mode, with a PC connected. Stand-alone support for Cortex devices is limited to CoreSight SoC-400 debug port setups.\u003c\/li\u003e\n  \u003cli\u003eCustomised versions are by arrangement with SEGGER; contact us with your requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher Portable PLUS Compared with Other SEGGER Flasher Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003cth\u003eHost and control interfaces\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher Portable PLUS (this product)\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, 1.8\" colour display\u003c\/td\u003e\n\u003ctd\u003eLi-ion battery or USB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-16-02-flasher-portable-plus-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-5-17-01-flasher-pro-programmer\"\u003eFlasher PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-5-17-02-flasher-pro-xl-programmer\"\u003eFlasher PRO XL\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-5-19-00-flasher-compact-programmer\"\u003eFlasher Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eField update of a Cortex-M controller inside a wind turbine nacelle, with no laptop and no mains supply. A service engineer carrying firmware for several product generations on one programmer. Reflashing Renesas RX-based machinery after a firmware fault, with Authorized Flashing capping how many units the image can be applied to.\u003c\/p\u003e\n\u003cp\u003eChoose the Portable PLUS for service and field work; for line-side programming, the Flasher PRO or Flasher Compact is the better fit.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Flasher Portable PLUS for \u003cspan data-ds-price=\"segger-5-16-02-flasher-portable-plus-programmer\"\u003e£1,100\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug and programming tools\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 20\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-portable-plus\/\"\u003eSEGGER Flasher Portable PLUS product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Portable_PLUS\"\u003eSEGGER Knowledge Base: Flasher Portable PLUS\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Portable_PLUS_V7\"\u003eSEGGER Knowledge Base: Flasher Portable PLUS V7\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173456095,"sku":"5.16.02","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-5-16-02-40212730183903.jpg?v=1689515217"},{"product_id":"segger-flasher-hub-4-control-module-5-01-30","title":"Module de contrôle SEGGER Flasher Hub-4","description":"\u003cp\u003eLe SEGGER Flasher Hub-4 (référence 5.01.30) est une unité de contrôle pour la programmation en parallèle, dotée de quatre ports USB-C 2.0 High Speed descendants qui pilotent chacun un Flasher Compact comme canal de programmation indépendant. Avec des hubs USB externes, il passe à 24 canaux. Il se commande via Ethernet, USB-C ou RS232, intègre des serveurs web et FTP, et s'alimente en 8 à 30 VDC, le tout dans un boîtier de 125mm x 78mm x 25mm pour 135g. Il est adapté aux lignes de production à fort volume qui doivent programmer plusieurs cartes en parallèle sans PC sur la ligne.\u003c\/p\u003e\n\n\u003ch2\u003eProgrammateur parallèle à quatre canaux, extensible à 24 canaux\u003c\/h2\u003e\n\u003cp\u003eEn Direct Mode, le Hub-4 gère jusqu'à quatre modules Flasher Compact branchés directement sur ses ports USB-C, sans hub USB supplémentaire. Le Flex Mode permet de connecter jusqu'à 24 modules Flasher Compact via des hubs USB externes. SEGGER n'assure le support technique que pour les configurations réalisées avec des SEGGER USB Hubs. Chaque canal fonctionne de manière indépendante, avec sa propre image de programmation et ses propres réglages : vous pouvez donc programmer simultanément différentes variantes de firmware sur une même ligne. Les cœurs CPU et interfaces cibles pris en charge sont ceux des Flasher Compact connectés.\u003c\/p\u003e\n\n\u003ch2\u003eFonctionnement autonome via TELNET ou RS232\u003c\/h2\u003e\n\u003cp\u003eLes canaux sont configurés une seule fois avec le logiciel Flasher de SEGGER. Après cette configuration initiale, le Hub-4 fonctionne en autonome et se commande via TELNET ou RS232 grâce à l'interface de commandes ASCII intégrée, conçue pour l'automatisation : aucun PC de bureau n'est nécessaire sur la ligne. Le serveur web intégré assure la commande et la configuration, et le serveur FTP reçoit à distance les nouvelles images de firmware et les fichiers de configuration. L'état de la programmation s'affiche sur les LED des Flasher connectés, via l'interface terminal ASCII ou dans l'interface web. Des données uniques comme des numéros de série, des adresses MAC et des signatures numériques peuvent être programmées dans chaque cible.\u003c\/p\u003e\n\n\u003ch2\u003eUnité de contrôle compacte pour montages de production\u003c\/h2\u003e\n\u003cp\u003eAu lieu d'un boîtier complet, le Hub-4 dispose d'une plaque de base et d'un capot en plexiglas, et SEGGER publie les données STEP du boîtier pour l'intégration dans un montage. Il s'alimente en 8 à 30 VDC avec protection contre l'inversion de polarité ; pour une charge maximale, l'alimentation d'entrée doit fournir au moins 12 VDC.\u003c\/p\u003e\n\n\u003ch2\u003eCaractéristiques techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterface USB Flasher\u003c\/th\u003e\n\u003ctd\u003e4 x USB-C 2.0 High Speed (descendant)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInterfaces hôte\u003c\/th\u003e\n\u003ctd\u003eUSB-C 2.0 High Speed (montant), USB Type-A (descendant), Ethernet, RS232 9 broches\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCanaux\u003c\/th\u003e\n\u003ctd\u003eJusqu'à 4 Flasher Compact (Direct Mode) ; jusqu'à 24 avec des hubs USB (Flex Mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAlimentation\u003c\/th\u003e\n\u003ctd\u003e8 à 30 VDC, protection contre l'inversion de polarité, 30 W max. (selon les appareils connectés ; au moins 12 VDC pour une charge maximale)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConsommation\u003c\/th\u003e\n\u003ctd\u003e11,5 W max.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e125mm x 78mm x 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePoids (sans câbles)\u003c\/th\u003e\n\u003ctd\u003e135g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003ePlaque de base et capot en plexiglas\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de fonctionnement\u003c\/th\u003e\n\u003ctd\u003e+5°C à +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de stockage\u003c\/th\u003e\n\u003ctd\u003e-20°C à +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHumidité relative\u003c\/th\u003e\n\u003ctd\u003eMoins de 90% rH, sans condensation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystème d'exploitation hôte\u003c\/th\u003e\n\u003ctd\u003eWindows et Linux (x86-64, ARM64) ; macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eContenu de la livraison\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher Hub-4\u003c\/li\u003e\n  \u003cli\u003eCâble USB-C\u003c\/li\u003e\n  \u003cli\u003eConnecteur d'alimentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimites\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLe Hub-4 ne programme pas lui-même les cibles. Chaque canal nécessite un Flasher Compact, vendu séparément.\u003c\/li\u003e\n  \u003cli\u003eSEGGER ne cite que le Flasher Compact comme module piloté par le Flasher Hub.\u003c\/li\u003e\n  \u003cli\u003eAu-delà de quatre canaux, des hubs USB externes sont nécessaires ; SEGGER ne prend en charge que les configurations avec des SEGGER USB Hubs.\u003c\/li\u003e\n  \u003cli\u003eUn PC reste nécessaire pour la configuration initiale des canaux.\u003c\/li\u003e\n  \u003cli\u003eAucun bloc d'alimentation n'est indiqué dans le contenu de la boîte, seulement le connecteur d'alimentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher Hub-4 comparé aux produits SEGGER similaires\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModèle\u003c\/th\u003e\n\u003cth\u003eCanaux directs\u003c\/th\u003e\n\u003cth\u003eCanaux max.\u003c\/th\u003e\n\u003cth\u003eDimensions (sans câbles)\u003c\/th\u003e\n\u003cth\u003ePrix HT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher Hub-4 (ce produit)\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e24 (Flex Mode)\u003c\/td\u003e\n\u003ctd\u003e125mm x 78mm x 25mm\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-flasher-hub-4-control-module-5-01-30\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-flasher-hub-12-control-module-5-01-20\"\u003eFlasher Hub-12\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e24 (Flex Mode)\u003c\/td\u003e\n\u003ctd\u003eBoîtier complet\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-flasher-hub-12-control-module-5-01-20\"\u003e£3,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\n\u003ca href=\"\/fr\/products\/segger-5-19-00-flasher-compact-programmer\"\u003eFlasher Compact\u003c\/a\u003e (un canal)\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003e40g, quatre trous de fixation\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eApplications typiques\u003c\/h2\u003e\n\u003cp\u003eQuatre Flasher Compact programment en une seule passe un panneau de quatre cartes Cortex-M, déclenchés via TELNET par l'automate de ligne. Transfert d'une nouvelle image de version vers le serveur FTP du hub depuis un serveur de production central, sans arrêter la ligne. Écriture de numéros de série et d'adresses MAC uniques dans chaque carte d'une série programmée en parallèle.\u003c\/p\u003e\n\u003cp\u003eChoisissez le Hub-4 lorsque quatre canaux parallèles suffisent pour la ligne, ou comme petit contrôleur pour un système Flex Mode jusqu'à 24 canaux.\u003c\/p\u003e\n\n\u003cp\u003eCommandez le Flasher Hub-4 pour \u003cspan data-ds-price=\"segger-flasher-hub-4-control-module-5-01-30\"\u003e£2,005\u003c\/span\u003e HT, plus un Flasher Compact par canal. Demandez-nous un devis formel pour un système de programmation parallèle complet. Retrouvez toute la gamme dans notre collection \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eOutils de débogage et de programmation SEGGER\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eDernière vérification le 16 novembre 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 pages du fabricant)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/tools\/flasher-hub-4\/\"\u003ePage produit SEGGER Flasher Hub-4\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Hub\"\u003eSEGGER Knowledge Base : Flasher Hub\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-compact\/\"\u003ePage produit SEGGER Flasher Compact\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173521631,"sku":"5.01.30","price":2005.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-flasher-hub-4-5-01-30-perspective.png?v=1794818092"},{"product_id":"segger-8-06-26-avr-pdi-adapter","title":"Adaptateur PDI SEGGER AVR","description":"\u003cp\u003eThe SEGGER AVR PDI Adapter (part number 8.06.26) connects a SEGGER Flasher to AVR targets programmed over PDI, adapting the standard 20-pin 0.1\" connector to three AVR PDI headers: 6-pin 0.1\", 6-pin 0.05\" and 10-pin 0.1\". It can also power the target at 3.3V or 5V, selected by jumper. It suits production programming stations and test fixtures that program AVR PDI devices with a Flasher PRO, PRO XL, Compact or Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eThree AVR PDI Headers from One Flasher Adapter\u003c\/h2\u003e\n\u003cp\u003eOne adapter covers the 6-pin and 10-pin AVR PDI layouts, so a Flasher can move between boards with different headers without rewiring. SEGGER's pinout for the 6-pin header is 1 DATA, 2 VTRef, 5 CLK and 6 GND, with pins 3 and 4 not connected. On the 10-pin header, pin 3 is DATA, pin 4 VTRef, pin 6 CLK, and pins 2 and 10 GND; the remaining pins are not connected. The Flasher side uses the standard 20-pin 0.1\" connector; see our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eOptional 3.3V or 5V Target Supply\u003c\/h2\u003e\n\u003cp\u003eA jumper selects a 3.3V or 5V supply for the target. When the supply option is jumpered, the target is powered through the VTREF connection, so a bare board can be programmed without its own supply.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the AVR PDI Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgrammer-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connectors\u003c\/th\u003e\n\u003ctd\u003e6-pin 0.1\" AVR PDI; 6-pin 0.05\" AVR PDI; 10-pin 0.1\" AVR PDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eDATA, CLK, VTRef, GND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e3.3V or 5V, jumper selectable, via VTREF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible programmers\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER lists Flasher models only; J-Link is not on the compatibility list.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no maximum target supply current for the adapter.\u003c\/li\u003e\n  \u003cli\u003ePDI only. For AVR devices programmed over SPI, use the AVR SPI Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAVR PDI Adapter Compared with Related SEGGER Flasher Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003cth\u003eTarget connectors\u003c\/th\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAVR PDI Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eAVR PDI\u003c\/td\u003e\n\u003ctd\u003e6-pin 0.1\", 6-pin 0.05\", 10-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-26-avr-pdi-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-25-avr-spi-adapter\"\u003eAVR SPI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAVR SPI\u003c\/td\u003e\n\u003ctd\u003e6-pin 0.1\", 6-pin 0.05\", 10-pin\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-25-avr-spi-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-22-stm8-adapter\"\u003eSTM8 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSTM8 SWIM\u003c\/td\u003e\n\u003ctd\u003eSWIM connector, 10-pin\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper; external power input\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-22-stm8-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-rl78-programming-adapter-8-06-20\"\u003eRL78 14-Pin Programming Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78\u003c\/td\u003e\n\u003ctd\u003e14-pin Renesas E1\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the AVR PDI Adapter for \u003cspan data-ds-price=\"segger-8-06-26-avr-pdi-adapter\"\u003e£95\u003c\/span\u003e ex VAT. Check your target's PDI header against the pinouts above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/segger-avr-pdi-adapter\/\"\u003eSEGGER AVR PDI Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08022_Flasher\"\u003eSEGGER Knowledge Base: UM08022 Flasher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173619935,"sku":"8.06.26","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-26-avr-pdi-adapter-segger-debug-store-uk-40288786710751.jpg?v=1691249157"},{"product_id":"segger-8-06-33-infineon-auto-20-adapter","title":"Adaptateur SEGGER Infineon AUTO-20","description":"\u003cp\u003eThe SEGGER Infineon AUTO-20 Adapter (part number 8.06.33) gives a SEGGER Flasher a JTAG connection to target hardware with an automotive connector, adapting the 20-pin 0.1\" JTAG connector to a 19-pin 0.05\" Samtec FTSH connector. SEGGER designed it for Infineon AURIX TC3xx microcontrollers, and it also connects a Flasher to other targets whose connector uses the same pinout. It suits production programming of AURIX TC3xx target boards on a Flasher PRO, PRO XL, Compact or Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eFlasher JTAG Access to AURIX TC3xx Automotive Connectors\u003c\/h2\u003e\n\u003cp\u003eThe adapter carries VTREF, TRST, TDI, TMS, TCK, TDO and RESET from the Flasher to the 19-pin automotive connector; SEGGER's pinout drawing marks the remaining positions RFU. Any target that follows the same connector pinout can be programmed through it, not only AURIX TC3xx. The Flasher side uses the standard 20-pin 0.1\" connector; see our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the Infineon AUTO-20 Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgrammer-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" (2.54mm) JTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connector\u003c\/th\u003e\n\u003ctd\u003e19-pin 0.05\" Samtec FTSH\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eVTREF, TRST, TDI, TMS, TCK, TDO, RESET, RFU\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTargets\u003c\/th\u003e\n\u003ctd\u003eInfineon AURIX TC3xx; other targets with the same connector pinout\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible programmers\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER lists Flasher models only; J-Link is not on the compatibility list.\u003c\/li\u003e\n  \u003cli\u003eJTAG only. For the 10-pin DAP connector on AURIX TC2xx, TC3xx and TC4xx targets, use the Infineon AURIX DAP-10 Adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes the pinout as a drawing only and gives no electrical specification beyond the connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAUTO-20 Adapter Compared with Related SEGGER Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eInterface and targets\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eInfineon AUTO-20 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003e19-pin 0.05\" Samtec FTSH, automotive pinout\u003c\/td\u003e\n\u003ctd\u003eJTAG; Infineon AURIX TC3xx\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-33-infineon-auto-20-adapter\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-infineon-aurix-dap-10-adapter-80638\"\u003eInfineon AURIX DAP-10 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10-pin FTSH\u003c\/td\u003e\n\u003ctd\u003eDAP; Infineon AURIX TC2xx, TC3xx, TC4xx and C167\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-infineon-aurix-dap-10-adapter-80638\"\u003e£64\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-00-19-pin-cortex-m-adapter\"\u003e19-Pin Cortex-M Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19-pin 0.05\" Samtec FTSH, ARM-defined pinout\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD and SWO; Cortex-M targets\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-00-19-pin-cortex-m-adapter\"\u003e£38\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-ppc-14-pin-jtag-adapter-80607\"\u003ePPC-14 JTAG Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14-pin\u003c\/td\u003e\n\u003ctd\u003eJTAG; Power Architecture (PowerPC) targets\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-ppc-14-pin-jtag-adapter-80607\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the Infineon AUTO-20 Adapter for \u003cspan data-ds-price=\"segger-8-06-33-infineon-auto-20-adapter\"\u003e£64\u003c\/span\u003e ex VAT. Check your target's connector pinout against SEGGER's drawing, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/infineon-auto-20-adapter-1\/\"\u003eSEGGER Infineon AUTO-20 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08022_Flasher\"\u003eSEGGER Knowledge Base: UM08022 Flasher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173652703,"sku":"8.06.33","price":64.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-33-40215838359775.jpg?v=1689584519"},{"product_id":"segger-8-06-25-avr-spi-adapter","title":"Adaptateur SPI AVR SEGGER","description":"\u003cp\u003eThe SEGGER AVR SPI Adapter (part number 8.06.25) connects a SEGGER Flasher to Microchip AVR devices over SPI, adapting the standard 20-pin 0.1\" connector to the 6-pin and 10-pin Microchip headers. Three target connectors are provided: 10-pin, 6-pin at 100 mil (2.54mm) and 6-pin at 50 mil (1.27mm). The adapter can also power the target at 3.3V or 5V, selected by jumper, for production programming with a Flasher PRO, PRO XL, Compact or Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eIn-System Programming of Microchip AVR over SPI\u003c\/h2\u003e\n\u003cp\u003eThe adapter carries the AVR SPI programming signals, MOSI, MISO, SCK and RESET, together with VCC and GND, from the Flasher to the target header. With both 6-pin pitches and the 10-pin layout on one board, a single programming station can serve AVR targets with either header style. The Flasher side uses the standard 20-pin 0.1\" connector; see our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eOptional 3.3V or 5V Target Supply\u003c\/h2\u003e\n\u003cp\u003eAn on-board regulator and a jumper give a choice of 3.3V or 5V for the target. When the supply option is jumpered, the target is powered through the VTREF connection, so an unpowered board can be programmed straight off the line.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the AVR SPI Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgrammer-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connectors\u003c\/th\u003e\n\u003ctd\u003e10-pin; 6-pin 100 mil (2.54mm); 6-pin 50 mil (1.27mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals\u003c\/th\u003e\n\u003ctd\u003eMOSI, MISO, SCK, RESET, VCC, GND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e3.3V or 5V, jumper selectable, via VTREF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported devices\u003c\/th\u003e\n\u003ctd\u003eMicrochip AVR devices with SPI programming\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible programmers\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER lists Flasher models only; J-Link is not on the compatibility list.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no maximum target supply current and no pitch for the 10-pin header.\u003c\/li\u003e\n  \u003cli\u003eSPI only. For AVR devices programmed over PDI, use the AVR PDI Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAVR SPI Adapter Compared with Related SEGGER Flasher Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003cth\u003eTarget connectors\u003c\/th\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAVR SPI Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eAVR SPI\u003c\/td\u003e\n\u003ctd\u003e10-pin, 6-pin 0.1\", 6-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-25-avr-spi-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-26-avr-pdi-adapter\"\u003eAVR PDI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAVR PDI\u003c\/td\u003e\n\u003ctd\u003e6-pin 0.1\", 6-pin 0.05\", 10-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-26-avr-pdi-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-22-stm8-adapter\"\u003eSTM8 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSTM8 SWIM\u003c\/td\u003e\n\u003ctd\u003eSWIM connector, 10-pin\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper; external power input\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-22-stm8-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-rl78-programming-adapter-8-06-20\"\u003eRL78 14-Pin Programming Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78\u003c\/td\u003e\n\u003ctd\u003e14-pin Renesas E1\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the AVR SPI Adapter for \u003cspan data-ds-price=\"segger-8-06-25-avr-spi-adapter\"\u003e£66\u003c\/span\u003e ex VAT. Check that your AVR device programs over SPI and that your Flasher is on the list above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/segger-avr-spi-adapter\/\"\u003eSEGGER AVR SPI Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08022_Flasher\"\u003eSEGGER Knowledge Base: UM08022 Flasher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173685471,"sku":"8.06.25","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-25-40288780681439.jpg?v=1691248976"},{"product_id":"segger-rl78-programming-adapter-8-06-20","title":"Adaptateur de programmation SEGGER RL78 14 broches","description":"\u003ch2\u003e Présentation de l'adaptateur de programmation 14 broches RL78\u003c\/h2\u003e\n\n\u003cp\u003e Améliorez votre expérience de programmation avec l'adaptateur de programmation 14 broches RL78, conçu pour convertir le connecteur standard 20 broches 0,1\" en connecteur E1 14 broches standard défini par Renesas. Cet adaptateur puissant ouvre un monde de possibilités pour vos besoins de programmation.\u003c\/p\u003e\n\n\u003ch2\u003e Puissant et polyvalent\u003c\/h2\u003e\n\n \u003cp\u003eAvec l'adaptateur de programmation 14 broches RL78, vous pouvez facilement basculer entre une tension d'alimentation de 3,3 V ou 5 V à l'aide d'un simple cavalier. Pas besoin d'investir dans des adaptateurs séparés - celui-ci fait tout ! De plus, l'adaptateur vous permet d'alimenter en option le matériel cible connecté, vous offrant ainsi un contrôle et une flexibilité ultimes.\u003c\/p\u003e\n\n\u003ch2\u003e Programmation Flash transparente\u003c\/h2\u003e\n\n\u003cp\u003e Cet adaptateur est conçu pour la programmation flash, garantissant des opérations de programmation fluides et efficaces. Dites adieu aux problèmes de compatibilité et profitez d'une programmation sans tracas avec l'adaptateur de programmation 14 broches RL78.\u003c\/p\u003e\n\n\u003ch2\u003e Remarque importante\u003c\/h2\u003e\n\n\u003cp\u003e Veuillez noter que l'adaptateur de programmation 14 broches RL78 est exclusivement destiné à la programmation flash. Il ne peut pas être utilisé avec un J-Link et n'est pas adapté au débogage des périphériques RL78. Pour tous vos besoins de programmation flash, faites confiance à la fiabilité et à l'efficacité de notre adaptateur de programmation.\u003c\/p\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173751007,"sku":"8.06.20","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-20-40288618643679.jpg?v=1691239080"},{"product_id":"segger-8-06-22-stm8-adapter","title":"Adaptateur SEGGER STM8","description":"\u003cp\u003eThe SEGGER STM8 Adapter (part number 8.06.22) connects a SEGGER Flasher to STM8 devices for flash programming, converting the standard 20-pin 0.1\" connector to a SWIM connector and a standard 10-pin connector. It can power the target at 3.3V or 5V, selected by jumper, and has an external input connector for supplying the target board from another source. It is built for STM8 production programming on a Flasher PRO, PRO XL, Compact or Portable PLUS.\u003c\/p\u003e\n\n\u003ch2\u003eSTM8 Flash Programming over SWIM\u003c\/h2\u003e\n\u003cp\u003eThe adapter takes the Flasher's 20-pin 0.1\" connector and presents both a SWIM connector and a standard 10-pin connector to the target; SEGGER publishes 4-pin and 10-pin pinout drawings. SEGGER tested Flashers with a 4-way ERNI ribbon cable, part number 839016, 100mm long with keyed female headers on both ends, for a total length of about 120mm. The Flasher side uses the standard 20-pin 0.1\" connector; see our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eThree Ways to Power the Target\u003c\/h2\u003e\n\u003cp\u003eA jumper selects a 3.3V or 5V target supply from the adapter; when the supply option is jumpered, the target is supplied through the VCCT connection. Alternatively, the target board can be powered through the adapter's external input connector.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this adapter. The order is for the STM8 Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgrammer-side connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget-side connectors\u003c\/th\u003e\n\u003ctd\u003eSWIM connector; standard 10-pin connector\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e3.3V or 5V, jumper selectable, via VCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExternal power\u003c\/th\u003e\n\u003ctd\u003eExternal input connector for powering the target board\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCable tested by SEGGER\u003c\/th\u003e\n\u003ctd\u003e4-way ERNI 839016, 100mm, keyed female headers, about 120mm total\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eFlash programming only\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible programmers\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, Flasher PRO XL, Flasher Compact, Flasher Portable PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlash programming only: SEGGER states the adapter cannot be used with a J-Link and cannot be used to debug STM8 devices.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no maximum target supply current for the adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER does not list a cable in the box; the ERNI 839016 cable is the one SEGGER tested.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSTM8 Adapter Compared with Related SEGGER Flasher Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003cth\u003eTarget connectors\u003c\/th\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSTM8 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eSTM8 SWIM\u003c\/td\u003e\n\u003ctd\u003eSWIM connector, 10-pin\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper; external power input\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-22-stm8-adapter\"\u003e£63\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-rl78-programming-adapter-8-06-20\"\u003eRL78 14-Pin Programming Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRenesas RL78\u003c\/td\u003e\n\u003ctd\u003e14-pin Renesas E1\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-rl78-programming-adapter-8-06-20\"\u003e£60\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-25-avr-spi-adapter\"\u003eAVR SPI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAVR SPI\u003c\/td\u003e\n\u003ctd\u003e10-pin, 6-pin 0.1\", 6-pin 0.05\"\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-25-avr-spi-adapter\"\u003e£66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-26-avr-pdi-adapter\"\u003eAVR PDI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAVR PDI\u003c\/td\u003e\n\u003ctd\u003e6-pin 0.1\", 6-pin 0.05\", 10-pin 0.1\"\u003c\/td\u003e\n\u003ctd\u003e3.3V or 5V, jumper\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-26-avr-pdi-adapter\"\u003e£95\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the STM8 Adapter for \u003cspan data-ds-price=\"segger-8-06-22-stm8-adapter\"\u003e£63\u003c\/span\u003e ex VAT. Check that your Flasher is on the list above, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/stm8-adapter\/\"\u003eSEGGER STM8 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/accessories\/adapters\/overview\/\"\u003eSEGGER Flasher Adapters overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/UM08022_Flasher\"\u003eSEGGER Knowledge Base: UM08022 Flasher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173783775,"sku":"8.06.22","price":63.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-22-40212790706399.jpg?v=1689516485"},{"product_id":"segger-8-06-06-ti-cti-20-adapter","title":"Adaptateur SEGGER TI-CTI-20","description":"\u003cp\u003eThe SEGGER TI-CTI-20 Adapter (part number 8.06.06) adapts the standard J-Link 20-pin 0.1\" connector to the TI CTI-20 connector, so a J-Link or Flasher can connect to Texas Instruments evaluation boards with a CTI-20 header, such as the AM335x evaluation module. A key on pin 6 stops the adapter being fitted the wrong way round. It suits JTAG debug and flash programming on TI evaluation hardware with a SEGGER probe already on the bench.\u003c\/p\u003e\n\n\u003ch2\u003eJ-Link and Flasher Access to TI CTI-20 Headers\u003c\/h2\u003e\n\u003cp\u003eThe probe side plugs into the standard J-Link 20-pin 0.1\" connector found on most J-Link models, and into the same 20-pin connector on Flasher. The target side presents the TI CTI-20 connector. SEGGER's schematic carries VTREF, TRST, TDI, TMS, TCK, RTCK, TDO and nSRST to the target, with EMU0 and EMU1 tied to GND. Probe-side pin assignments are in our \u003ca href=\"\/fr\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eListed for the TI AM335x Evaluation Module\u003c\/h2\u003e\n\u003cp\u003eSEGGER names the AM335x evaluation module as an example target. Its Knowledge Base page for the TI AM3359 states that the debug probe can be connected using the TI CTI-20 adapter, and lists the TMDXEVM3358 as tested hardware.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible SEGGER Probes and Programmers\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists the adapter for Flasher PRO, Flasher PRO XL, Flasher Compact, Flasher ARM, Flasher Portable PLUS and Flasher Secure, and for J-Link PRO PoE, J-Link PRO, J-Link ULTRA+, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8.06.06\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe side\u003c\/th\u003e\n\u003ctd\u003eJ-Link\/Flasher 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget side\u003c\/th\u003e\n\u003ctd\u003eTI CTI-20 connector\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eKeying\u003c\/th\u003e\n\u003ctd\u003eKey on pin 6\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget signals (SEGGER schematic)\u003c\/th\u003e\n\u003ctd\u003eVTREF, TRST, TDI, TMS, TCK, RTCK, TDO, nSRST; EMU0 and EMU1 tied to GND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExample target\u003c\/th\u003e\n\u003ctd\u003eTI AM335x evaluation module (TMDXEVM3358 listed as tested)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Flasher models\u003c\/th\u003e\n\u003ctd\u003eFlasher PRO, PRO XL, Compact, ARM, Portable PLUS, Secure\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible J-Link models\u003c\/th\u003e\n\u003ctd\u003eJ-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box contents list for this adapter, so we state only the TI-CTI-20 Adapter itself.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSEGGER's schematic shows the JTAG signal set only; SEGGER lists no SWD or trace connection for this adapter.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no dimensions and lists no cable for it.\u003c\/li\u003e\n  \u003cli\u003eFor TI targets with a 14-pin 0.1\" JTAG header, use the 14-Pin TI Adapter. For Jacinto 7 boards with a MIPI-60 header, use the MIPI-60 Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTI-CTI-20 Adapter Compared with Related Adapters\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003cth\u003eSignals\u003c\/th\u003e\n\u003cth\u003eCable listed by SEGGER\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTI-CTI-20 Adapter (this product)\u003c\/td\u003e\n\u003ctd\u003eTI CTI-20\u003c\/td\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003ctd\u003eNone listed\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-06-ti-cti-20-adapter\"\u003e£78\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-8-06-03-14-pin-ti-adapter\"\u003e14-Pin TI Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTI 14-pin, 0.1\"\u003c\/td\u003e\n\u003ctd\u003eJTAG\u003c\/td\u003e\n\u003ctd\u003e0.1\" 14-pin ribbon cable (18cm)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-06-03-14-pin-ti-adapter\"\u003e£62\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/segger-6-06-42-mipi-60-adapter-uk\"\u003eMIPI-60 Adapter\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMIPI-60 (TI Jacinto 7)\u003c\/td\u003e\n\u003ctd\u003eJTAG\/SWD, up to 4-bit trace\u003c\/td\u003e\n\u003ctd\u003eNone listed\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-06-42-mipi-60-adapter-uk\"\u003e£130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eOrder the TI-CTI-20 Adapter for \u003cspan data-ds-price=\"segger-8-06-06-ti-cti-20-adapter\"\u003e£78\u003c\/span\u003e ex VAT. Check your board's CTI-20 header against SEGGER's schematic, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/fr\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/ti-cti-20-adapter\/\"\u003eSEGGER TI-CTI-20 Adapter product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003eSEGGER J-Link related pricing: adapters\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/TI_AM3359\"\u003eSEGGER Knowledge Base: TI AM3359\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/20-pin_J-Link_Connector\"\u003eSEGGER Knowledge Base: 20-pin J-Link Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/accessories\/adapters\/overview\/\"\u003eSEGGER J-Link adapters overview\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173816543,"sku":"8.06.06","price":78.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-06-40280536711391.jpg?v=1691070420"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/lg-logo-segger.jpg?v=1724338144","url":"https:\/\/thedebugstore.com\/fr\/collections\/segger-microcontroller-gmbh-catalogue-debug-store.oembed","provider":"Debug Store","version":"1.0","type":"link"}