{"title":"Sondes haute tension (HT) pour oscilloscope","description":"\u003cp data-mce-fragment=\"1\"\u003eLes sondes haute tension (HT) pour oscilloscope sont des outils essentiels utilisés en ingénierie électronique pour mesurer avec précision les hautes tensions et fournir des informations précieuses sur le comportement des signaux électriques. Ces sondes spécialisées sont spécialement conçues pour gérer et mesurer en toute sécurité les niveaux de tension qui dépassent la plage d'entrée standard d'un oscilloscope classique. En connectant une sonde HT à votre oscilloscope, vous pouvez analyser et dépanner en toute confiance les circuits haute tension, l'électronique de puissance, les équipements industriels, etc.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Chez The Debug Store, nous comprenons l'importance de mesures de tension précises et proposons une sélection complète de sondes haute tension (HT) pour oscilloscopes. Nos sondes HT sont méticuleusement conçues et fabriquées pour offrir des performances fiables, une précision exceptionnelle et une sécurité maximale. Que vous soyez un ingénieur électronique professionnel, un chercheur ou un amateur, nos sondes HT offrent la précision dont vous avez besoin pour déboguer et analyser efficacement les systèmes haute tension.\u003c\/p\u003e","products":[{"product_id":"hantek-ht8100-high-voltage-isolated-probe","title":"Sonde différentielle haute tension Hantek HT8100 100MHz","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003ePrésentation\u003c\/h2\u003e \u003cp\u003eLa sonde différentielle haute tension Hantek HT8100 est un équipement de mesure indispensable pour les ingénieurs en électronique de puissance qui travaillent sur des circuits flottants, des alimentations à découpage et des variateurs de moteurs. Contrairement aux sondes d'oscilloscope standard, qui mesurent par rapport à la masse, cette sonde différentielle mesure en toute sécurité la différence de tension entre deux points flottants, avec une isolation galvanique par rapport à la masse de l'oscilloscope.\u003c\/p\u003e \u003ch2\u003ePrincipales applications\u003c\/h2\u003e \u003ch3\u003eConception en électronique de puissance\u003c\/h3\u003e \u003cp\u003eIndispensable pour mesurer les tensions drain-source (VDS) des MOSFET, les tensions collecteur-émetteur des IGBT et les chutes de tension aux bornes des diodes de roue libre dans les configurations en demi-pont et en pont complet. La bande passante de 100MHz capture les transitoires de commutation rapides des composants de puissance SiC et GaN actuels.\u003c\/p\u003e \u003ch3\u003eVariateurs de moteurs\u003c\/h3\u003e \u003cp\u003eEssentielle pour analyser les sorties d'onduleurs triphasés, mesurer les tensions entre phases et déboguer les schémas de modulation PWM sans créer de boucles de masse dangereuses via le système de mesure.\u003c\/p\u003e \u003ch3\u003eDébogage d'alimentations à découpage\u003c\/h3\u003e \u003cp\u003ePermet de mesurer en toute sécurité les tensions primaire et secondaire du transformateur, de tester la barrière d'isolement et d'analyser l'ondulation dans les convertisseurs flyback, forward et résonants LLC.\u003c\/p\u003e \u003ch2\u003eCaractéristiques techniques\u003c\/h2\u003e \u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eParamètre\u003c\/th\u003e\n\u003cth\u003eSpécification HT8100\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eBande passante (-3dB)\u003c\/td\u003e\n\u003ctd\u003e100MHz\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTemps de montée\u003c\/td\u003e\n\u003ctd\u003e≤3,5ns\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRapports d'atténuation\u003c\/td\u003e\n\u003ctd\u003e1:50, 1:500 (sélectionnables)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTension différentielle maximale\u003c\/td\u003e\n\u003ctd\u003e±130V (1:50), ±1300V (1:500)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003ePlage d'entrée en mode commun\u003c\/td\u003e\n\u003ctd\u003e1000Vrms CAT II, 600Vrms CAT III\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eImpédance d'entrée\u003c\/td\u003e\n\u003ctd\u003e4MΩ±1% (asymétrique), 8MΩ±1% (différentielle)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCapacité d'entrée\u003c\/td\u003e\n\u003ctd\u003e≤8pF (asymétrique), ≤4pF (différentielle)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCMRR\u003c\/td\u003e\n\u003ctd\u003e≥80dB (DC), ≥60dB (100Hz), ≥50dB (1MHz)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003ePrécision\u003c\/td\u003e\n\u003ctd\u003e±2%\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eBruit de fond\u003c\/td\u003e\n\u003ctd\u003e≤2mVrms (1:50), ≤1mVrms (1:500)\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003c\/div\u003e \u003ch2\u003eConsignes de sécurité\u003c\/h2\u003e \u003caside class=\"callout\"\u003e \u003cstrong\u003eAvertissement :\u003c\/strong\u003e Vérifiez toujours que le circuit est hors tension avant de connecter les pointes de la sonde. La catégorie CAT III protège contre les transitoires, mais n'élimine pas le risque d'électrocution en cas de contact direct avec des conducteurs sous tension. \u003c\/aside\u003e \u003cp\u003eLa certification de sécurité du HT8100 couvre deux catégories d'installation : CAT II pour les prises et les appareils raccordés par fiche, et CAT III pour les tableaux de distribution et les installations fixes. Le système de détection de surtension émet un avertissement visuel lorsque l'entrée dépasse ±140V (gamme 1:50) ou ±1400V (gamme 1:500), ce qui protège la sonde et l'appareil de mesure.\u003c\/p\u003e \u003ch2\u003eRaccordement et configuration\u003c\/h2\u003e \u003ch3\u003eConnexions physiques\u003c\/h3\u003e \u003cp\u003eLa sonde possède des cordons d'entrée à code couleur : rouge pour l'entrée positive, noir pour l'entrée négative. La sortie BNC standard se raccorde à n'importe quelle voie d'oscilloscope. L'adaptateur secteur externe fournit une alimentation continue isolée, ce qui évite de dépendre de l'alimentation de sonde de l'oscilloscope.\u003c\/p\u003e \u003ch3\u003eStratégie de mise à la masse\u003c\/h3\u003e \u003cp\u003eContrairement aux sondes asymétriques, le HT8100 ne nécessite aucune connexion de masse au circuit testé. Ce fonctionnement flottant évite les boucles de masse, tandis que le taux de réjection en mode commun élevé préserve la précision de mesure.\u003c\/p\u003e \u003ch2\u003eTechniques de mesure\u003c\/h2\u003e \u003ch3\u003eTension drain-source d'un MOSFET\u003c\/h3\u003e \u003cpre\u003e\u003ccode\u003e \/\/ Configuration typique pour mesurer VDS 1. Régler l'oscilloscope en couplage DC 2. Choisir le rapport d'atténuation adapté (1:50 pour \u0026lt;130V, 1:500 pour \u0026gt;130V) 3. Relier le cordon rouge au drain du MOSFET 4. Relier le cordon noir à la source du MOSFET 5. Régler l'échelle verticale de l'oscilloscope : Vpp_expected \/ attenuation_ratio \/ 8 6. Placer le déclenchement sur front montant à 10 % de la tension attendue \u003c\/code\u003e\u003c\/pre\u003e \u003ch3\u003eTests d'isolement\u003c\/h3\u003e \u003cp\u003ePour mesurer l'isolement d'un transformateur, reliez les entrées de la sonde de part et d'autre de la barrière d'isolement. Le CMRR élevé garantit une mesure précise de petits signaux différentiels, même en présence de plusieurs kilovolts de tension de mode commun sur les deux enroulements.\u003c\/p\u003e \u003ch2\u003eComparaison avec les alternatives\u003c\/h2\u003e \u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eMéthode\u003c\/th\u003e\n\u003cth\u003eSécurité\u003c\/th\u003e\n\u003cth\u003ePrécision\u003c\/th\u003e\n\u003cth\u003eCoût\u003c\/th\u003e\n\u003cth\u003eLimites\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSonde différentielle HT8100\u003c\/td\u003e\n\u003ctd\u003eClassée CAT III\u003c\/td\u003e\n\u003ctd\u003e±2%, \u0026gt;50dB CMRR\u003c\/td\u003e\n\u003ctd\u003eModéré\u003c\/td\u003e\n\u003ctd\u003eBande passante limitée à 100MHz\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eDeux sondes asymétriques (fonction Math)\u003c\/td\u003e\n\u003ctd\u003eFaible\u003c\/td\u003e\n\u003ctd\u003eCMRR faible\u003c\/td\u003e\n\u003ctd\u003eFaible\u003c\/td\u003e\n\u003ctd\u003eRisque de boucle de masse\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOscilloscope isolé\u003c\/td\u003e\n\u003ctd\u003eExcellente\u003c\/td\u003e\n\u003ctd\u003eExcellente\u003c\/td\u003e\n\u003ctd\u003eTrès élevé\u003c\/td\u003e\n\u003ctd\u003eCoût de l'équipement\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSonde à isolation optique\u003c\/td\u003e\n\u003ctd\u003eExcellente\u003c\/td\u003e\n\u003ctd\u003eExcellente\u003c\/td\u003e\n\u003ctd\u003eTrès élevé\u003c\/td\u003e\n\u003ctd\u003eComplexité, coût\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003c\/div\u003e \u003ch2\u003eMaintenance et étalonnage\u003c\/h2\u003e \u003cp\u003eUne vérification annuelle de l'étalonnage garantit le maintien de la précision de mesure. Contrôlez la compensation de la sonde avec le signal d'étalonnage intégré de l'oscilloscope, et inspectez les câbles d'entrée pour détecter tout dommage susceptible de compromettre les caractéristiques de sécurité. La sonde nécessite un temps de chauffe de 20 minutes pour atteindre la précision spécifiée.\u003c\/p\u003e \u003caside class=\"spec-note\"\u003e \u003cstrong\u003eLimites environnementales :\u003c\/strong\u003e température de fonctionnement 0-40°C, température de stockage -10 à 45°C, altitude maximale de fonctionnement 3000m. \u003c\/aside\u003e \u003ch2\u003eRésolution des problèmes courants\u003c\/h2\u003e \u003ch3\u003eAucun signal affiché\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eVérifier le branchement de l'adaptateur secteur et l'allumage du voyant vert POWER\u003c\/li\u003e \u003cli\u003eVérifier la connexion du câble BNC à l'entrée de l'oscilloscope\u003c\/li\u003e \u003cli\u003eVérifier que la voie de l'oscilloscope est activée et correctement réglée\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eMesure instable\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTorsader les cordons d'entrée pour réduire le bruit capté\u003c\/li\u003e \u003cli\u003eNe pas rallonger les câbles d'entrée au-delà de la longueur fournie\u003c\/li\u003e \u003cli\u003eVérifier que la sonde et l'oscilloscope ont terminé leur temps de chauffe de 20 minutes\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eIndication de dépassement de gamme\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eLe voyant rouge indique que la tension d'entrée dépasse la gamme sélectionnée\u003c\/li\u003e \u003cli\u003ePasser au rapport d'atténuation supérieur (1:500) pour les tensions supérieures à 130V\u003c\/li\u003e \u003cli\u003eVérifier les niveaux de tension du circuit avant le raccordement\u003c\/li\u003e \u003c\/ul\u003e \u003c\/section\u003e","brand":"Hantek Electronic Co Ltd","offers":[{"title":"Default Title","offer_id":37768470790333,"sku":"HT8100","price":210.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/hantek-electronic-co-ltd-oscilloscope-accessory-hantek-ht8100-high-voltage-isolated-probe-100mhz-29835258101949.jpg?v=1685014127"},{"product_id":"testec-tt-hv-400-high-voltage-oscilloscope-probe-13040","title":"Sondes d'oscilloscope passives haute tension de la série TT-HV de TESTEC","description":"","brand":"TESTEC Elektronik GmbH","offers":[{"title":"Default Title","offer_id":42544277586143,"sku":"13020","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/testec-elektronik-gmbh-oscilloscope-accessory-2500v-peak-testec-tt-hv-400-high-voltage-passive-oscilloscope-probe.jpg?v=1739118421"},{"product_id":"testec-tt-hvp-40-high-voltage-probe-15001","title":"Sonde multimètre passive haute tension TESTEC TT-HVP40","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eLa\u003c\/span\u003e \u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003esonde multimètre haute tension TESTEC TT-HVP40\u003c\/strong\u003e\u003c\/em\u003e \u003cspan data-mce-fragment=\"1\"\u003ea été conçue pour une utilisation professionnelle. Cette sonde passive haute tension de qualité est équipée d'un rapport d'atténuation x1000 avec une tension de crête de 40 KV DC.\u003c\/span\u003e\u003c\/p\u003e","brand":"TESTEC Elektronik GmbH","offers":[{"title":"Default Title","offer_id":42555950760159,"sku":"15001","price":145.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/testec-elektronik-gmbh-tt-hvp-40-testec-tt-hvp-40-high-voltage-probe-sku-15001-40kv-dc-28kv-ac-multimeter-divider-1118259137.png?v=1738515539"},{"product_id":"omicron-lab-phv-1000-o-high-voltage-probe","title":"Sonde passive haute tension 100:1 OMICRON Lab PHV 1000-O","description":"\u003cp\u003eThe OMICRON Lab PHV 1000-O is a high-voltage passive 100:1 probe made by PMK for the Bode 100, rated 2000 V peak with no measurement category and 1000 V CAT II, with 50 MΩ || 7.5 pF input impedance and a 5 mm probe tip. It is based on PMK's PHV high-voltage series and designed for the Bode 100's 1 MΩ ac-coupled inputs. Power electronics engineers use it for loop gain measurements on converters running at bus voltages beyond the reach of a 10:1 probe.\u003c\/p\u003e\n\n\u003ch2\u003eLoop Gain Measurement at Higher Voltages\u003c\/h2\u003e\n\u003cp\u003eOMICRON Lab recommends the PHV 1000-O for accurate loop gain measurements at higher voltages and for protecting the Bode 100 input channels. Like the PML 111O, it keeps the divider in the probe rather than relying on the analyser input. The Bode 100 inputs are ac-coupled, and OMICRON Lab warns that a standard oscilloscope probe can damage them. PMK's manual still asks you to check the Bode 100's maximum permissible signal levels and fit suitable attenuators if necessary.\u003c\/p\u003e\n\n\u003ch2\u003e100:1 Probe Ratings and Derating\u003c\/h2\u003e\n\u003cp\u003eSystem input resistance is 50 MΩ ±1% and input capacitance is 7.5 pF, so loading of a high-impedance feedback node is lower than with a 10:1 probe. The compensation range is 10 pF to 50 pF, set with the supplied adjustment tool. Maximum input voltage is 2000 V peak (DC or AC peak) outside any measurement category and 1000 V in CAT II, both at pollution degree 2. The permitted voltage falls as frequency rises; the derating curve is in the manual. Neither OMICRON Lab nor PMK publishes a bandwidth figure for this probe.\u003c\/p\u003e\n\n\u003ch2\u003eSafe Connection to High-Voltage Circuits\u003c\/h2\u003e\n\u003cp\u003eConnect the probe ground to earth before the tip touches the test point, and remove the tip before disconnecting the probe from the instrument. Use the ground lead for earth ground only, so this is not a floating or differential probe, and use only grounded measuring instruments. When the probe is combined with an accessory, the lower of the two ratings applies.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eAttenuation\u003c\/th\u003e\n\u003ctd\u003e100:1\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInput resistance (system)\u003c\/th\u003e\n\u003ctd\u003e50 MΩ ±1%\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInput capacitance (system)\u003c\/th\u003e\n\u003ctd\u003e7.5 pF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompensation range\u003c\/th\u003e\n\u003ctd\u003e10 pF to 50 pF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInstrument input coupling\u003c\/th\u003e\n\u003ctd\u003e1 MΩ AC (Bode 100)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. input voltage, no measurement category\u003c\/th\u003e\n\u003ctd\u003e2000 V peak (DC or AC peak), pollution degree 2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. input voltage, CAT II\u003c\/th\u003e\n\u003ctd\u003e1000 V, pollution degree 2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe tip diameter\u003c\/th\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e1.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (probe only)\u003c\/th\u003e\n\u003ctd\u003e67 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e0 °C to +50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNon-operating temperature\u003c\/th\u003e\n\u003ctd\u003e-40 °C to +71 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating humidity\u003c\/th\u003e\n\u003ctd\u003e80% RH up to +31 °C, decreasing linearly to 40% at +50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating altitude\u003c\/th\u003e\n\u003ctd\u003eUp to 2,000 m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSafety standard\u003c\/th\u003e\n\u003ctd\u003eIEC 61010-031\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePMK order number\u003c\/th\u003e\n\u003ctd\u003e860-512-O00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo bandwidth or rise time is published. If you need a stated 50 MHz bandwidth at board-level voltages, the \u003ca href=\"\/fr\/products\/omicron-lab-pml111o-passive-10-1-probe-uk\"\u003ePML 111O\u003c\/a\u003e is specified for it.\u003c\/li\u003e\n  \u003cli\u003eThe maximum input voltage derates with frequency. Check the curve before probing fast switching nodes.\u003c\/li\u003e\n  \u003cli\u003eOMICRON Lab names only the Bode 100 for this probe. The Bode 500 uses N-type connectors where the Bode 100 uses BNC, so ask us before ordering for a Bode 500 setup.\u003c\/li\u003e\n  \u003cli\u003eA BNC adapter 5.0-L is an optional PMK accessory and is not in the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBode 100 Passive Probe Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth scope=\"col\"\u003eFeature\u003c\/th\u003e\n\u003cth\u003e\u003ca href=\"\/fr\/products\/omicron-lab-pml111o-passive-10-1-probe-uk\"\u003ePML 111O\u003c\/a\u003e\u003c\/th\u003e\n\u003cth\u003ePHV 1000-O\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAttenuation\u003c\/th\u003e\n\u003ctd\u003e10:1\u003c\/td\u003e\n\u003ctd\u003e100:1\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInput impedance (system)\u003c\/th\u003e\n\u003ctd\u003e1 MΩ || 12.5 pF\u003c\/td\u003e\n\u003ctd\u003e50 MΩ || 7.5 pF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystem bandwidth\u003c\/th\u003e\n\u003ctd\u003e50 MHz\u003c\/td\u003e\n\u003ctd\u003eNot stated by OMICRON Lab or PMK\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. input voltage\u003c\/th\u003e\n\u003ctd\u003e400 V rms CAT I, 300 V rms CAT II\u003c\/td\u003e\n\u003ctd\u003e2000 V peak (no measurement category), 1000 V CAT II\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompensation range\u003c\/th\u003e\n\u003ctd\u003e40 pF to 55 pF\u003c\/td\u003e\n\u003ctd\u003e10 pF to 50 pF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProbe tip diameter\u003c\/th\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e1.3 m\u003c\/td\u003e\n\u003ctd\u003e1.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (probe only)\u003c\/th\u003e\n\u003ctd\u003e48 g\u003c\/td\u003e\n\u003ctd\u003e67 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBNC adapter in the box\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo (optional PMK accessory)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"omicron-lab-pml111o-passive-10-1-probe-uk\"\u003e£235\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"omicron-lab-phv-1000-o-high-voltage-probe\"\u003e£535\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eLoop gain and phase margin measurement on an off-line converter with a \u003ca href=\"\/fr\/products\/omicron-lab-bode-100-vector-network-analyser-uk\"\u003eBode 100\u003c\/a\u003e and a \u003ca href=\"\/fr\/products\/omicron-lab-b-wit-100-wideband-injection-transformer-uk\"\u003eB-WIT 100\u003c\/a\u003e, whose 600 V CAT II isolation lets the injection point sit at high potential. Stability measurement on slow PFC control loops with the \u003ca href=\"\/fr\/products\/omicron-lab-b-lft-100-low-frequency-injection-transformer-uk\"\u003eB-LFT 100\u003c\/a\u003e. Probing high-impedance feedback nodes where the 50 MΩ input resistance keeps DC loading low.\u003c\/p\u003e\n\u003cp\u003eThe PHV 1000-O suits Bode 100 owners measuring control loops above the PML 111O's 300 V rms CAT II rating.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePHV 1000-O probe with 0.8 mm spring tip (fitted) and protection cap 5.0-L\u003c\/li\u003e\n  \u003cli\u003eSolid probe tip, CuBe 0.8 mm\u003c\/li\u003e\n  \u003cli\u003eGround lead, 22 cm\u003c\/li\u003e\n  \u003cli\u003eSprung hook 5.0-L\u003c\/li\u003e\n  \u003cli\u003eInsulating cap 5.0-L\u003c\/li\u003e\n  \u003cli\u003eAdjustment tool T\u003c\/li\u003e\n  \u003cli\u003ePrinted user manual in English\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe OMICRON Lab PHV 1000-O is \u003cspan data-ds-price=\"omicron-lab-phv-1000-o-high-voltage-probe\"\u003e£535\u003c\/span\u003e ex VAT. Contact us for a formal quotation covering the Bode 100, injection transformer and probes. See all \u003ca href=\"\/fr\/collections\/vector-network-analyser-accessories\"\u003evector network analyser accessories\u003c\/a\u003e in our range.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat Does 2000 V Peak with No Measurement Category Mean?\u003c\/h3\u003e\n\u003cp\u003eIt is PMK's rating for measurements that are not in CAT II, III or IV, at pollution degree 2. Where CAT II applies, the limit is 1000 V. Both ratings fall as frequency rises, following the derating curve in the manual.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAnswered by John Legg, Director, Debug Store\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eShould I Choose the PHV 1000-O or the PML 111O?\u003c\/h3\u003e\n\u003cp\u003eChoose the PML 111O for board-level loops up to 300 V rms CAT II, where its 50 MHz bandwidth and 2.5 mm tip help. Choose the PHV 1000-O when the node you probe exceeds that rating.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAnswered by John Legg, Director, Debug Store\u003c\/small\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed: 18 November 2026\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (2 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.omicron-lab.com\/products\/vector-network-analysis\/accessories\/passive-probes\"\u003eOMICRON Lab Passive Probes PML 111O and PHV 1000-O\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.omicron-lab.com\/products\/vector-network-analysis\/accessories\/injection-transformer\"\u003eOMICRON Lab Injection Transformers B-WIT and B-LFT\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"OMICRON-Lab","offers":[{"title":"Default Title","offer_id":44340939555039,"sku":"P0008137","price":535.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/omicron-lab-p0008137-40398157938911.jpg?v=1693649635"},{"product_id":"micsig-dp-series-high-voltage-differential-probe-dp700","title":"Sonde différentielle haute tension Micsig série DP","description":"","brand":"Micsig","offers":[{"title":"100 MHz \/ 700 V","offer_id":46202249085151,"sku":"DP700","price":210.0,"currency_code":"GBP","in_stock":true},{"title":"100 MHz \/ 1500V","offer_id":46202249117919,"sku":"DP1500","price":210.0,"currency_code":"GBP","in_stock":true},{"title":"100 MHz \/ 3000V","offer_id":46202249150687,"sku":"DP3000","price":210.0,"currency_code":"GBP","in_stock":true},{"title":"100 MHz \/ 7000V","offer_id":46202249183455,"sku":"DP7000","price":756.0,"currency_code":"GBP","in_stock":true},{"title":"200 MHz \/ 700 V","offer_id":46202238140639,"sku":"DP702","price":336.0,"currency_code":"GBP","in_stock":true},{"title":"200 MHz \/ 1500V","offer_id":46202238173407,"sku":"DP1502","price":336.0,"currency_code":"GBP","in_stock":true},{"title":"200 MHz \/ 3000V","offer_id":46202238206175,"sku":"DP3002","price":336.0,"currency_code":"GBP","in_stock":true},{"title":"300 MHz \/ 1500V","offer_id":46202238304479,"sku":"DP1503","price":470.0,"currency_code":"GBP","in_stock":true},{"title":"300 MHz \/ 3000V","offer_id":46202238337247,"sku":"DP3003","price":470.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/micsig-micsig-dp-series-high-voltage-differential-probe-precision-signal-measurement-tool-72421133943159.png?v=1733449781"},{"product_id":"testec-tt-hvp-15-b-high-voltage-probe-15010","title":"TESTEC TT-HVP 15 B - 10 kV DC \/ 40 MHz High Voltage Oscilloscope Probe","description":"","brand":"TESTEC Elektronik GmbH","offers":[{"title":"Default Title","offer_id":54933398815095,"sku":"15010","price":390.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/testec-elektronik-gmbh-15010-testec-tt-hvp-15-b-high-voltage-probe-15010-10-kv-dc-40-mhz-oscilloscope-probe-1123912397.png?v=1738601925"},{"product_id":"testec-tt-hvp-2739-high-voltage-passive-probe-15014","title":"TESTEC TT-HVP 2739 High Voltage Passive Oscilloscope Probe | 39 kV Peak, 1000:1, CAT 0 Only","description":"\u003cp\u003eThe TESTEC TT-HVP 2739 is a 1000:1 passive high voltage oscilloscope probe rated to 39 kV DC+AC peak and 27 kV AC RMS, with DC to 50 MHz bandwidth, 7 ns rise time and 900 MΩ \/ 2.0 pF input loading. TESTEC designs it for use within Measurement Category 0 (CAT 0) only and for ground-referenced measurements only, on high-voltage supplies and generators in the lab. It plugs into a standard oscilloscope BNC input with no external power.\u003c\/p\u003e\n\n\u003ch2\u003e39 kV Peak Through a 1000:1 Passive Divider\u003c\/h2\u003e\n\u003cp\u003eAt 1000:1, 39 kV at the tip reads as 39 V on the oscilloscope. DC accuracy is within 3% from 0 to 35 kV, and AC accuracy is within 6% at 1 kHz. Input resistance is 900 MΩ and the maximum loading current is 45 µA, which limits loading on the source.\u003c\/p\u003e\n\u003cp\u003eAbove 25 kV, TESTEC states that the TT-IH 2739 high-voltage isolation head must be connected to the probe to meet IEC 61010-031:2015. TESTEC also states that the probe is not suitable for long-time use: at 30 kV DC or 20 kV AC RMS and above, keep contact with the circuit to 30 seconds, with at least 5 minutes between measurements.\u003c\/p\u003e\n\n\u003ch2\u003eDC to 50 MHz Bandwidth for High Voltage Edges\u003c\/h2\u003e\n\u003cp\u003eWith 2.0 pF input capacitance and a 7 ns rise time, this high voltage oscilloscope probe resolves switching edges and pulse shapes as well as DC levels and ripple. For signals above 40 MHz, or when adjusting the bandwidth, TESTEC specifies the short earth lead connected to the alligator clip to get the best frequency response. The compensation trimmer sits in the BNC plug and covers oscilloscope inputs from 15 pF to 35 pF (TESTEC's manual gives 10 pF to 35 pF); it is set with the supplied adjust bar against a 200 Hz square wave whenever the probe moves to another oscilloscope or channel.\u003c\/p\u003e\n\n\u003ch2\u003eSafety Rating and Conditions of Use\u003c\/h2\u003e\n\u003cp\u003eTESTEC lists IEC 61010-031:2015 as the safety standard and states that the probe is designed for use within Measurement Category 0 (CAT 0) only. It must not be used on circuits defined by any other measurement category. The probe is for indoor use, and only by trained or otherwise qualified personnel.\u003c\/p\u003e\n\u003cp\u003eAll measurements are ground referenced. The alligator clip goes to a good earth ground before the tip touches the high voltage, and the tip is removed before the ground clip. TESTEC prohibits floating measurements with this probe. If it has been exposed to more than 39 kV DC or 27 kV AC RMS, it must not be used again.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eOrder number\u003c\/th\u003e\n\u003ctd\u003e15014\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDivision ratio\u003c\/th\u003e\n\u003ctd\u003e1000:1\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaximum input voltage\u003c\/th\u003e\n\u003ctd\u003e39 kV DC+AC peak; 27 kV AC RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBandwidth\u003c\/th\u003e\n\u003ctd\u003eDC to 50 MHz (-3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRise time\u003c\/th\u003e\n\u003ctd\u003e7 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInput resistance\u003c\/th\u003e\n\u003ctd\u003e900 MΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInput capacitance\u003c\/th\u003e\n\u003ctd\u003e2.0 pF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaximum loading current\u003c\/th\u003e\n\u003ctd\u003e45 µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDC voltage accuracy\u003c\/th\u003e\n\u003ctd\u003e≤ 3% (0 to 35 kV)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAC voltage accuracy\u003c\/th\u003e\n\u003ctd\u003e≤ 6% at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSignal to noise\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 60 dB at 1 kHz; \u0026gt; 50 dB at 1 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTemperature coefficient\u003c\/th\u003e\n\u003ctd\u003e≤ 200 ppm\/°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompensation range\u003c\/th\u003e\n\u003ctd\u003e15 pF to 35 pF (testec.de); 10 pF to 35 pF (TESTEC 2024 manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOscilloscope connector\u003c\/th\u003e\n\u003ctd\u003eBNC, compensation trimmer in the plug\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e2 m ± 0.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSafety standard\u003c\/th\u003e\n\u003ctd\u003eIEC 61010-031:2015\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMeasurement category\u003c\/th\u003e\n\u003ctd\u003eCAT 0 only (TESTEC manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e-10 °C to 55 °C, indoor use\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHumidity\u003c\/th\u003e\n\u003ctd\u003e85% RH or less at 35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20 °C to 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e80 x 80 x 320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e460 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCAT 0 only. It must not be used on circuits defined by any other measurement category. For other work, check the rating of an active differential probe such as the \u003ca href=\"\/fr\/products\/testec-tt-sx-9002-active-differential-probe-30mhz-1400v-15602\"\u003eTT-SX 9002\u003c\/a\u003e against your circuit.\u003c\/li\u003e\n  \u003cli\u003eGround-referenced measurements only. TESTEC prohibits floating measurements.\u003c\/li\u003e\n  \u003cli\u003eMeasurements above 25 kV need the TT-IH 2739 isolation head connected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eTESTEC does not publish a box-contents list for the TT-HVP 2739. The manual refers to a supplied adjust bar for the compensation trimmer, and to the short earth lead and alligator clip used in measurement. The TT-IH 2739 isolation head is not stated as included; ask us when ordering.\u003c\/p\u003e\n\n\u003ch2\u003eTT-HVP 2739 Compared with Other TESTEC High Voltage Probes\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eAttenuation\u003c\/th\u003e\n\u003cth\u003eMaximum input voltage (TESTEC)\u003c\/th\u003e\n\u003cth\u003eBandwidth\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTT-HVP 2739 (this product)\u003c\/td\u003e\n\u003ctd\u003ex1000\u003c\/td\u003e\n\u003ctd\u003eDC+AC peak 39 kV, AC 27 kVrms\u003c\/td\u003e\n\u003ctd\u003e50 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"testec-tt-hvp-2739-high-voltage-passive-probe-15014\"\u003e£1,025\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/testec-tt-hvp-15-b-high-voltage-probe-15010\"\u003eTT-HVP 15 B\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003ex1000\u003c\/td\u003e\n\u003ctd\u003eDC 10 kV, AC 7 kVrms, peak 20 kV\u003c\/td\u003e\n\u003ctd\u003e40 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"testec-tt-hvp-15-b-high-voltage-probe-15010\"\u003e£390\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/testec-tt-hvp-08-high-voltage-probe-15008\"\u003eTT-HVP 08\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003ex1000\u003c\/td\u003e\n\u003ctd\u003eDC 8 kV, AC 6 kVrms, peak 16 kV\u003c\/td\u003e\n\u003ctd\u003e40 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"testec-tt-hvp-08-high-voltage-probe-15008\"\u003e£275\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/testec-tt-hvp-40-high-voltage-probe-15001\"\u003eTT-HVP 40\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003ex1000 at 10 MΩ; x2000 at 1 MΩ\u003c\/td\u003e\n\u003ctd\u003eDC 40 kV, AC 28 kVrms (0 to 300 Hz)\u003c\/td\u003e\n\u003ctd\u003e300 Hz\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"testec-tt-hvp-40-high-voltage-probe-15001\"\u003e£145\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eChecking the output level and ripple of a high-voltage DC supply up to 35 kV, the range over which TESTEC specifies DC accuracy within 3%. Capturing switching edges and pulse shape on a high-voltage generator output, using the 50 MHz bandwidth and the short earth lead. Measuring AC high voltage up to 27 kV RMS, with AC accuracy within 6% at 1 kHz. Above 30 kV DC or 20 kV AC RMS, each measurement is limited to 30 seconds of contact.\u003c\/p\u003e\n\n\u003cp\u003eThe TT-HVP 2739 suits test and development engineers making ground-referenced CAT 0 measurements on high-voltage sources, who need a 39 kV peak rating and a 50 MHz bandwidth in one passive probe. TESTEC's manual gives no voltage derating curve against frequency, so do not assume the full 39 kV applies at 50 MHz.\u003c\/p\u003e\n\n\u003cp\u003eOrder the TESTEC TT-HVP 2739 \u003cspan data-ds-price=\"testec-tt-hvp-2739-high-voltage-passive-probe-15014\"\u003e£1,025\u003c\/span\u003e ex VAT. If your measurement is above 25 kV, ask us for a formal quotation that includes the TT-IH 2739 isolation head.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed: 30 October 2026\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (manual and 1 manufacturer page)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/files.thedebugstore.com\/testec\/15014\/testec-tt-hvp-2739-high-voltage-probe-user-manual.pdf\"\u003eTESTEC TT-HVP 2739 instruction manual (DE\/EN, 2024, PDF)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/testec.de\/en\/products\/high-voltage-probes.html\"\u003eTESTEC high voltage probes product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"TESTEC Elektronik GmbH","offers":[{"title":"Default Title","offer_id":54933402780023,"sku":"15014","price":1025.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/testec-elektronik-gmbh-15014-testec-tt-hvp-2739-high-voltage-oscilloscope-probe-1000-1-50-mhz-39-kv-1123912395.png?v=1738602460"},{"product_id":"testec-tt-hvp-08-high-voltage-probe-15008","title":"TESTEC TT-HVP 08 High Voltage Probe | 8 kV DC \/ 6 kV AC | 1000:1 Divider","description":"","brand":"TESTEC Elektronik GmbH","offers":[{"title":"Default Title","offer_id":54933446721911,"sku":"15008","price":275.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/testec-elektronik-gmbh-15008-testec-tt-hvp-08-high-voltage-oscilloscope-probe-15008-8kv-passive-divider-1123912396.png?v=1738601921"},{"product_id":"testec-tt-hv-200-high-voltage-probe-13020","title":"TESTEC TT-HV 200 High-Voltage Oscilloscope Probe  2kV, 100:1","description":"","brand":"TESTEC Elektronik GmbH","offers":[{"title":"Default Title","offer_id":54948821107063,"sku":"13040","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/testec-elektronik-gmbh-oscilloscope-accessory-2500v-peak-testec-tt-hv-400-high-voltage-passive-oscilloscope-probe.jpg?v=1739118421"},{"product_id":"testec-tt-hv-150-high-voltage-oscilloscope-probe-1-5kv-100-1","title":"TESTEC TT-HV 150 High-Voltage Oscilloscope Probe  1.5kV, 100:1","description":"","brand":"TESTEC Elektronik GmbH","offers":[{"title":"Default Title","offer_id":54959150727543,"sku":"13000","price":50.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/testec-elektronik-gmbh-oscilloscope-accessory-2500v-peak-testec-tt-hv-400-high-voltage-passive-oscilloscope-probe.jpg?v=1739118421"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/lg-testec-hvp-40-multimeter.jpg?v=1724338193","url":"https:\/\/thedebugstore.com\/fr\/collections\/high-voltage-hv-probes.oembed","provider":"Debug Store","version":"1.0","type":"link"}