{"product_id":"segger-j-link-wifi-8-14-28","title":"SEGGER J-Link WiFi Wireless Debug Probe (8.14.28)","description":"\u003cp\u003eThe SEGGER J-Link WiFi (part number 8.14.28) is a JTAG\/SWD debug probe that connects to the host over IEEE 802.11 b\/g\/n WiFi in the 2.4 GHz band, or over USB 2.0 Hi-Speed, with up to 15 MHz target interface speed, download speeds up to 1 MB\/s and a 1.2V to 5V target interface. SEGGER lists J-Flash, Unlimited Flash Breakpoints, Ozone and RDI licences with it. It is built for targets that move, as in robotics, or that must stay shielded or inside a hazardous area, away from the development PC.\u003c\/p\u003e\n\n\u003ch2\u003eWireless JTAG\/SWD Debug Probe for Moving or Shielded Targets\u003c\/h2\u003e\n\u003cp\u003eThe probe travels with the target and links to the PC over WiFi, so a robot arm or a moving platform can be debugged without a USB cable trailing back to the bench. Where the target operates in a hazardous environment, the PC and the engineer can stay outside, behind a physical barrier. The J-Link WiFi is USB powered and shares that supply with the target: it can supply the target with 5V at up to 300mA. On the target side it uses the standard J-Link 20-pin 0.1\" connector; pin assignments and adapter options are in our \u003ca href=\"\/es\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eWiFi Setup Over USB\u003c\/h2\u003e\n\u003cp\u003eThe network is set up while the probe is connected by USB. In J-Link Configurator you enter the SSID and password in the WiFi configuration section; in J-Link Commander the SetWifi command sets the SSID. SEGGER notes that WiFi probes are usually only shown in J-Link Configurator when connected via USB, and that UDP discovery will usually not work for them.\u003c\/p\u003e\n\n\u003ch2\u003eLicences, Debug Interfaces, RTT and VCOM\u003c\/h2\u003e\n\u003cp\u003eSEGGER's licence overview lists J-Flash, Unlimited Flash Breakpoints, Ozone and RDI as included with the J-Link WiFi, with monitor-mode debugging. Supported debug interfaces are JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2. SEGGER's cores list covers ARM Cortex-M, Cortex-A and Cortex-R, legacy ARM7 to ARM11, RISC-V cores from SiFive, Andes, Codasip and Nuclei, Renesas RX, Microchip PIC32, Silicon Labs EFM8 and Cadence Tensilica Xtensa. Real Time Transfer (RTT) moves data between the running target and the host over the debug connection, and VCOM bridges a target UART to a virtual COM port when debugging over SWD.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and IDE Compatibility\u003c\/h2\u003e\n\u003cp\u003eJ-Link software is free of charge. The software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon). SEGGER lists support in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso and Visual Studio Code, among others.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eJ-Link WiFi probe, 20-pin 0.1\" ribbon cable and a USB cable.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interfaces\u003c\/th\u003e\n\u003ctd\u003eIEEE 802.11 b\/g\/n WiFi, 2.4 GHz; USB 2.0 Hi-Speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported debug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTref\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V (derived from USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWO sampling frequency\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 220mA at 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIncluded licences\u003c\/th\u003e\n\u003ctd\u003eJ-Flash, Unlimited Flash Breakpoints, Ozone, RDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e103mm x 53mm x 28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e70g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStandards (listed by SEGGER under EMC)\u003c\/th\u003e\n\u003ctd\u003eEN 301 489-1\/-17, EN 300 328, EN 62368\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWiFi is 2.4 GHz IEEE 802.11 b\/g\/n only.\u003c\/li\u003e\n  \u003cli\u003eInitial WiFi setup needs a USB connection, and UDP discovery will usually not work over WiFi.\u003c\/li\u003e\n  \u003cli\u003eDownload speed is up to 1 MB\/s and target interface speed up to 15 MHz; the J-Link ULTRA+ and PRO models reach up to 4 MB\/s and 50 MHz.\u003c\/li\u003e\n  \u003cli\u003eNo ETM trace on Cortex-M (use SEGGER J-Trace) and no QSPI target interface.\u003c\/li\u003e\n  \u003cli\u003eVCOM is available only when debugging over SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link WiFi Compared with PLUS and PRO\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003cth\u003eEthernet\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link WiFi (this product)\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed and IEEE 802.11 b\/g\/n WiFi\u003c\/td\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-wifi-8-14-28\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-8-02-28-j-link-plus-classic-debugger\"\u003eJ-Link PLUS Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed\u003c\/td\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 15 MHz\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-02-28-j-link-plus-classic-debugger\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-j-link-pro-debugger-programmer-8-12-00\"\u003eJ-Link PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed and 100 Mbit\/s Ethernet\u003c\/td\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-pro-debugger-programmer-8-12-00\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003eJ-Link PRO PoE\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed and 100 Mbit\/s Ethernet\u003c\/td\u003e\n\u003ctd\u003eUp to 4 MB\/s\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz\u003c\/td\u003e\n\u003ctd\u003eYes, with IEEE 802.3af PoE\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-12-28-j-link-pro-poe-debugger-uk\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eDebugging the Cortex-M motor controller of a mobile robot while it drives, with RTT logs streamed back to the PC. Firmware work on a target that runs inside a test chamber or a guarded machine cell, with the engineer outside the barrier.\u003c\/p\u003e\n\u003cp\u003eIf the probe can stay wired to a network, the J-Link PRO adds 50 MHz and 4 MB\/s over Ethernet.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Link WiFi for \u003cspan data-ds-price=\"segger-j-link-wifi-8-14-28\"\u003e£1,100\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/es\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-wifi\/\"\u003eSEGGER J-Link WiFi product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_WiFi\"\u003eSEGGER Knowledge Base: J-Link WiFi\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Setting_up_Ethernet_interface\"\u003eSEGGER Knowledge Base: Setting up Ethernet interface (WiFi setup)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jlink-related\/\"\u003eSEGGER J-Link pricing and licence overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop-us.segger.com\/product\/j-link-wifi-8-14-28\/\"\u003eSEGGER US shop: J-Link WiFi (8.14.28)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172014303,"sku":"8.14.28","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-14-28-segger-j-link-wifi-8-14-28-42714466615519.png?v=1722900000","url":"https:\/\/thedebugstore.com\/es\/products\/segger-j-link-wifi-8-14-28","provider":"Debug Store","version":"1.0","type":"link"}