{"product_id":"segger-8-22-00-j-trace-pro-risc-v","title":"SEGGER J-Trace PRO RISC-V Debug Probe","description":"\u003cp\u003eThe SEGGER J-Trace PRO RISC-V (part number 8.22.00) is a streaming trace probe for RV32 and RV64 RISC-V cores, using RISC-V N-Trace BTM, with a USB 3.0 SuperSpeed and Gigabit Ethernet host link, download speeds up to 4.0 MB\/s and a 1.2V to 5V target interface. It combines J-Link debugging with unlimited instruction trace, live code coverage and live code profiling. It suits firmware teams bringing up and validating RISC-V microcontrollers and SoCs that implement N-Trace.\u003c\/p\u003e\n\n\u003ch2\u003eStreaming N-Trace for RISC-V Cores\u003c\/h2\u003e\n\u003cp\u003eStreaming trace sends data continuously to the PC instead of stopping when a buffer fills, so a recording can run long enough to catch a rare fault or a program that ends up stuck in a fault handler. SEGGER's Knowledge Base lists N-Trace BTM for RISC-V and supported cores of RV32 and RV64 on this model. Devices without a SEGGER trace reference must implement the RISC-V trace components that SEGGER describes in its N-Trace documentation.\u003c\/p\u003e\n\n\u003ch2\u003eDebug and Trace Connectors\u003c\/h2\u003e\n\u003cp\u003eThe probe has two target connectors: the 20-pin JTAG\/SWD connector used across the J-Link range, with a 14-pin adapter available, and a 19-pin 0.05\" JTAG\/SWD and Trace connector that carries the trace clock and four trace data lines. Pin assignments for the 20-pin connector are in our \u003ca href=\"\/es\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. SEGGER's feature table for this model lists JTAG, cJTAG and SWD debug interfaces, and the probe can supply 5V to the target.\u003c\/p\u003e\n\n\u003ch2\u003eFull J-Link PRO Debug Capability\u003c\/h2\u003e\n\u003cp\u003eJ-Trace PRO RISC-V is also a full J-Link debug probe for RISC-V. It includes the full set of J-Link PRO licences, including Unlimited Flash Breakpoints. SEGGER allows Ozone, its debugger and trace analysis tool, to be used free of charge with a J-Trace PRO, including for commercial use. Ozone is SEGGER's recommended tool for trace analysis; debugging works from any J-Link compatible IDE. Software runs on Windows, Linux and macOS, including ARM64 and Apple Silicon hosts.\u003c\/p\u003e\n\u003cp\u003eThe Ethernet data lines are isolated to IEEE 802.3 (1500 Vrms for one minute). The shield is not, so SEGGER recommends an unshielded twisted pair cable where that isolation matters.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Trace PRO RISC-V probe\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.05\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n  \u003cli\u003eUSB 3.0 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 3.0 SuperSpeed; Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin (14-pin adapter available); JTAG\/SWD + Trace 19-pin 0.05\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eStreaming trace; N-Trace BTM (RISC-V)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported cores\u003c\/th\u003e\n\u003ctd\u003eRISC-V RV32, RV64\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 4.0 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace capacitive load\u003c\/th\u003e\n\u003ctd\u003e3 pF J-Trace plus 8 pF cable (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e123mm x 68mm x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e120g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRISC-V only. SEGGER's feature table for this model lists no ARM ETM, PTM or ETB trace, no SWO and no ARM monitor-mode debugging; for ARM and RISC-V in one probe, choose the J-Trace PRO.\u003c\/li\u003e\n  \u003cli\u003eNo SWD multi-drop, VCOM or CMSIS-DAP v1 (HID) mode.\u003c\/li\u003e\n  \u003cli\u003eTrace needs the target to implement N-Trace and bring the trace pins out to a connector; SEGGER notes that trace setup depends on the target hardware design.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's package list for this model does not include the Cortex-M Trace Reference Board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Trace PRO RISC-V Compared with the Other J-Trace PRO Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrace architectures\u003c\/th\u003e\n\u003cth\u003eCortex-M Trace Reference Board in box\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Trace PRO RISC-V (this product)\u003c\/td\u003e\n\u003ctd\u003eRISC-V (RV32, RV64)\u003c\/td\u003e\n\u003ctd\u003eNot listed\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-22-00-j-trace-pro-risc-v\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-j-trace-pro-trace-probe\"\u003eJ-Trace PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R, Cortex-M and RISC-V\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-trace-probe\"\u003e£3,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-j-trace-pro-cortex-debugger\"\u003eJ-Trace PRO Cortex\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-A, Cortex-R and Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-debugger\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-j-trace-pro-cortex-m-8-18-00\"\u003eJ-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1,515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eInstruction trace on an RV32 microcontroller to find the code path that leads to an intermittent exception. Live code coverage on an RV64 core to show which paths a test suite exercised before release. Trace on a SiFive core bitstream on an ARTY board, connected through the \u003ca href=\"\/es\/products\/segger-8-06-35-sifive-arty-trace-adapter\"\u003eSiFive-ARTY Trace Adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eChoose the J-Trace PRO RISC-V when all your trace targets are RISC-V.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Trace PRO RISC-V for \u003cspan data-ds-price=\"segger-8-22-00-j-trace-pro-risc-v\"\u003e£2,005\u003c\/span\u003e ex VAT. Check that your device implements N-Trace with the trace pins connected, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/es\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/models\/j-trace-pro-risc-v\/\"\u003eSEGGER J-Trace PRO RISC-V product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Trace_PRO_RISC-V\"\u003eSEGGER Knowledge Base: J-Trace PRO RISC-V\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/RISC-V_N-Trace\"\u003eSEGGER Knowledge Base: RISC-V N-Trace\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/19-pin_JTAG\/SWD_and_Trace_Connector\"\u003eSEGGER Knowledge Base: 19-pin JTAG\/SWD and Trace Connector\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/jtrace\/\"\u003eSEGGER J-Trace pricing and part numbers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172243679,"sku":"8.22.00","price":2005.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-22-00-40212577452255.jpg?v=1689939145","url":"https:\/\/thedebugstore.com\/es\/products\/segger-8-22-00-j-trace-pro-risc-v","provider":"Debug Store","version":"1.0","type":"link"}