{"product_id":"segger-8-19-00-j-link-base-compact-debugger","title":"SEGGER J-Link BASE Compact Debug Probe","description":"\u003cp\u003eThe SEGGER J-Link BASE Compact (part number 8.19.00) is a USB-powered JTAG\/SWD debug probe in a 46mm x 46mm x 17mm housing, with a 1.2V to 5V target interface, up to 15 MHz target interface speed and download speeds up to 1 MB\/s. It has the same J-Link BASE feature set as the desktop Classic model, with a USB-C host port and two mounting holes so it can stay inside a test fixture or end equipment. It suits firmware bring-up on ARM Cortex, RISC-V, Renesas RX and Microchip PIC32 targets, and fixed debug or programming stations where a full-size probe will not fit.\u003c\/p\u003e\n\n\u003ch2\u003eCompact JTAG\/SWD Debug Probe Built for Fixtures\u003c\/h2\u003e\n\u003cp\u003eAt 20g and 46mm square, with two mounting holes, the Compact is built to be fixed inside equipment housings, test jigs and development systems. The host link is USB 2.0 Hi-Speed over USB-C, and the probe is USB powered. On the target side it uses the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/es\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Interfaces and Supported Cores\u003c\/h2\u003e\n\u003cp\u003eCurrent J-Link BASE hardware supports JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2. SEGGER's supported cores list covers ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, legacy ARM7 to ARM1176, RISC-V cores from SiFive, Andes, Codasip and Nuclei, Renesas RX, Microchip PIC32 and Silicon Labs EFM8. The probe can also supply the target with 5V at up to 300mA from the USB rail.\u003c\/p\u003e\n\n\u003ch2\u003eRTT, VCOM and Trace Buffer Support\u003c\/h2\u003e\n\u003cp\u003eSEGGER Real Time Transfer (RTT) moves data between the running target and the host through the debug connection, so you can log or interact with an application without a spare UART. Where a UART is available, the VCOM function bridges it to a virtual COM port on the PC using pins 5 (J-Link Tx) and 17 (J-Link Rx) of the 20-pin connector; VCOM works only when debugging over SWD. Embedded Trace Buffer (ETB) and Micro Trace Buffer (MTB) are supported where the target implements them.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and IDE Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe J-Link software and firmware updates are free. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon). SEGGER lists full support in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso and Visual Studio Code, among others. Several J-Links can run from one PC, each identified by its serial number.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eJ-Link BASE Compact probe, 20-pin 0.1\" ribbon cable and a USB-C cable. No adapter for 10-pin 0.05\" Cortex Debug headers is included.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported debug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V (derived from USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWO sampling frequency\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 50mA plus target supply current\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e46mm x 46mm x 17mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e20g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Flash and J-Flash SPI, Unlimited Flash Breakpoints, the Ozone debugger and the RDI licence pack are not included, and SEGGER lists monitor-mode debugging under the PLUS upgrade. They come with the J-Link PLUS, or with the BASE to PLUS upgrade licence for an existing BASE.\u003c\/li\u003e\n  \u003cli\u003eDownload speed is up to 1 MB\/s; SEGGER quotes up to 4 MB\/s for higher-tier J-Link models.\u003c\/li\u003e\n  \u003cli\u003eNo ETM trace (use SEGGER J-Trace) and no QSPI target interface.\u003c\/li\u003e\n  \u003cli\u003eVCOM is available only when debugging over SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link BASE Compact Compared with Related Models\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003cth\u003eHost connector\u003c\/th\u003e\n\u003cth\u003eJ-Flash, Ozone, Unlimited Flash Breakpoints\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link BASE Compact (this product)\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, 20g, two mounting holes\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-8-08-00-j-link-base-classic\"\u003eJ-Link BASE Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 x 53 x 27mm, 70g\u003c\/td\u003e\n\u003ctd\u003eUSB Type B\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-08-00-j-link-base-classic\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-j-link-plus-compact-8-19-28\"\u003eJ-Link PLUS Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, two mounting holes\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-plus-compact-8-19-28\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/j-link-upgrade-base-to-plus\"\u003eJ-Link Upgrade BASE to PLUS\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLicence for an existing BASE\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eAdds them\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"j-link-upgrade-base-to-plus\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eFlash download and source-level debug of STM32, NXP LPC and Kinetis Cortex-M parts from STM32CubeIDE or MCUXpresso. A probe fixed inside a test jig, wired to a 20-pin header, for repeat debug access to Cortex-M33 or RISC-V boards in validation. RTT logging from a target with no free UART during firmware bring-up.\u003c\/p\u003e\n\u003cp\u003eChoose the Compact for a fixture or enclosure; for the bench, the Classic carries the same feature set in a larger housing.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Link BASE Compact for \u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/es\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 30\/10\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003eSEGGER J-Link BASE product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_BASE\"\u003eSEGGER Knowledge Base: J-Link BASE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base: Using J-Link VCOM functionality\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172145375,"sku":"8.19.00","price":470.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-19-00-40212528234719.jpg?v=1689509458","url":"https:\/\/thedebugstore.com\/es\/products\/segger-8-19-00-j-link-base-compact-debugger","provider":"Debug Store","version":"1.0","type":"link"}