{"product_id":"segger-5-19-00-flasher-compact-programmer","title":"SEGGER Flasher Compact In-Circuit Programmer","description":"\u003cp\u003eThe SEGGER Flasher Compact (part number 5.19.00) is a universal in-system flash programmer in a 40g housing with four mounting holes, a USB-C host port, 128 MB of internal flash, a 1.2V to 5V target interface and JTAG\/SWD speeds up to 50 MHz. SEGGER describes it as functionally identical to the Flasher PRO, supporting the same devices, without the PRO's Ethernet and RS232 ports. It is built to be fixed inside production rigs, ATE and HIL fixtures, and is the programming channel used with the Flasher Hub-4 and Flasher Hub-12 for gang programming.\u003c\/p\u003e\n\n\u003ch2\u003eCompact Flash Programmer Built for ATE and Test Fixtures\u003c\/h2\u003e\n\u003cp\u003eThe four mounting holes let the Compact be screwed to a mounting plate or directly inside a fixture. It is powered from its USB-C port and needs no external supply; in stand-alone mode any standard USB power source works, such as a USB wall charger or a port on a Flasher Hub, with no data connection to a PC. It has three boot modes: PC-based, stand-alone and file-access.\u003c\/p\u003e\n\n\u003ch2\u003eGang Programming with Flasher Hub-4 and Flasher Hub-12\u003c\/h2\u003e\n\u003cp\u003eConnected to a Flasher Hub-4 or Flasher Hub-12, each Flasher Compact becomes one programming channel, and up to 24 devices can be programmed in parallel. Each channel can carry its own firmware image and settings, so different variants can run on the same line.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Interfaces and Supported Devices\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists tens of thousands of supported devices in hundreds of device families, and new flash loaders arrive with the free software updates. Supported target interfaces are SPI, QSPI, 8051 C2, cJTAG, FINE, ICSP, IIC, ISP, JTAG, PDI, SPD, SWD, SWIM, UART and UPDI. Supported cores include ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, ARM7 and ARM9, RISC-V RV32 and RV64 and Renesas RX. Licences for all supported devices are included in the price, and devices not yet supported can be added with the Flasher SDK. The target connector is a male 20-pin IDC keyed box header with 0.1\" (2.54mm) pitch; pin assignments and adapter options are in our \u003ca href=\"\/es\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon).\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMale 20-pin IDC keyed box header, 0.1\" (2.54mm) pitch, optional adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target interfaces\u003c\/th\u003e\n\u003ctd\u003eSPI, QSPI, 8051 C2, cJTAG, FINE, ICSP, IIC, ISP, JTAG, PDI, SPD, SWD, SWIM, UART, UPDI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInternal flash memory\u003c\/th\u003e\n\u003ctd\u003e128 MB (TBW: 10 TB)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003eDepends on target interface; JTAG\/SWD 50 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTRef\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V, max. 400mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 130mA idle; 500mA if the target is powered by the Flasher\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget cable length\u003c\/th\u003e\n\u003ctd\u003e20cm recommended and supplied; max. 2m, which may reduce target interface speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e40g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eFour mounting holes in the housing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eLess than 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher Compact\u003c\/li\u003e\n  \u003cli\u003eUSB-C cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo Ethernet or RS232. For direct network or serial control of a single programmer, choose the Flasher PRO.\u003c\/li\u003e\n  \u003cli\u003eStand-alone mode on ARM Cortex targets is limited to CoreSight SoC-400 DAP setups. Microchip PIC32, Silicon Labs EFM8 and Renesas RH850 G4KH are supported in PC-based mode only, and the Renesas FINE interface currently works in host-based mode only.\u003c\/li\u003e\n  \u003cli\u003eThe Flasher is a production programmer, not a debug probe: SEGGER lists no ETB or ETM trace, no Cortex-M monitor mode debugging and no CMSIS-DAP mode.\u003c\/li\u003e\n  \u003cli\u003eGang programming needs a Flasher Hub-4 or Flasher Hub-12, sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher Compact Compared with Other SEGGER Flasher Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003cth\u003eHost and control interfaces\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher Compact (this product)\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-5-17-01-flasher-pro-programmer\"\u003eFlasher PRO\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-5-17-02-flasher-pro-xl-programmer\"\u003eFlasher PRO XL\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-flasher-hub-4-control-module-5-01-30\"\u003eFlasher Hub-4\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eControl unit for up to 4 Compacts (24 with USB hubs)\u003c\/td\u003e\n\u003ctd\u003eUSB-C, Ethernet, RS232\u003c\/td\u003e\n\u003ctd\u003e8 to 30 VDC\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-flasher-hub-4-control-module-5-01-30\"\u003e£2,005\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eA programmer screwed inside a bed-of-nails fixture, flashing a Cortex-M4 MCU and its external QSPI NOR as each board is tested. Four to twenty-four Compacts on a Flasher Hub programming panels of STM32 or RISC-V boards in parallel. A HIL rig that reflashes the device under test between runs.\u003c\/p\u003e\n\u003cp\u003eChoose the Compact for fixtures and gang systems; for a single bench station with network control, the Flasher PRO carries the same programming engine.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Flasher Compact for \u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/es\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug and programming tools\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-compact\/\"\u003eSEGGER Flasher Compact product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Compact\"\u003eSEGGER Knowledge Base: Flasher Compact\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Compact_V7\"\u003eSEGGER Knowledge Base: Flasher Compact V7\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Hub\"\u003eSEGGER Knowledge Base: Flasher Hub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173423327,"sku":"5.19.00","price":920.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-5-19-00-40212725399775.jpg?v=1689515404","url":"https:\/\/thedebugstore.com\/es\/products\/segger-5-19-00-flasher-compact-programmer","provider":"Debug Store","version":"1.0","type":"link"}