{"product_id":"segger-5-17-01-flasher-pro-programmer","title":"SEGGER Flasher PRO In-System Flash Programmer 5.17.01","description":"\u003cp\u003eThe SEGGER Flasher PRO (part number 5.17.01) is a universal in-system flash programmer with 128 MB of internal flash, a 1.2V to 5V target interface and target interface speeds up to 50 MHz. It programs internal MCU and SoC flash plus external QSPI, SPI and CFI NOR flash, either stand-alone or under PC control over USB, RS232 or Ethernet. It suits production lines, ATE stations and teams that need one programmer for many device families.\u003c\/p\u003e\n\n\u003ch2\u003eStand-Alone In-System Flash Programmer for Production Lines\u003c\/h2\u003e\n\u003cp\u003eOnce a project and firmware image are stored in the 128 MB internal flash, the Flasher PRO programs without a PC. Programming starts from a button press, a TTL signal, or remotely over USB, UART, RS232 or Ethernet, and the result is reported through LEDs, the software or the hardware interfaces. SEGGER isolates the Ethernet data lines in accordance with IEEE 802.3, tested at 1500 Vrms for one minute. For MCUs that allow memory access while running, turbo mode downloads and programs at the same time to cut overhead.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Interfaces and Supported Devices\u003c\/h2\u003e\n\u003cp\u003eSEGGER lists tens of thousands of supported devices in hundreds of device families, and new flash loaders arrive with the free software updates. The Knowledge Base lists JTAG, cJTAG, SWD, SWD multi-drop, SPI, QSPI, Microchip PIC32 ICSP, Renesas FINE and Silicon Labs C2 among the supported target interfaces. Supported cores include ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, ARM7 and ARM9, RISC-V RV32 and RV64 and Renesas RX. The target connector is a male 20-pin IDC keyed box header with 0.1\" (2.54mm) pitch; pin assignments and adapter options are in our \u003ca href=\"\/es\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon).\u003c\/p\u003e\n\n\u003ch2\u003eSerial Numbers, Patch Data and Authorized Flashing\u003c\/h2\u003e\n\u003cp\u003eSerial numbers, MAC addresses, signatures and licence keys can be applied to each unit as patch data during programming. Authorized Flashing sets a limit on the number of programming cycles, so a programmer sent to a contract manufacturer stops at the agreed number of cycles. Licences for all supported devices are included in the price, and software, firmware and flash loader updates are free.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interfaces\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 High-Speed (USB-C), RS232, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eMale 20-pin IDC keyed box header, 0.1\" (2.54mm) pitch, optional adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInternal flash memory\u003c\/th\u003e\n\u003ctd\u003e128 MB (TBW: 10 TB)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. target interface speed\u003c\/th\u003e\n\u003ctd\u003e50 MHz (JTAG, SWD)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported target voltage\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCurrent drawn from VTRef\u003c\/th\u003e\n\u003ctd\u003eLess than 25µA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e1.5V to 5V adjustable, max. 400mA (hardware V8; fixed 5V on earlier hardware)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 143.2mA idle (hardware V8)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReset type\u003c\/th\u003e\n\u003ctd\u003eOpen drain with 100 Ohm series resistor, can be pulled low or tristated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget cable length\u003c\/th\u003e\n\u003ctd\u003e20cm recommended and supplied; max. 2m, which may reduce target interface speed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSize (without cables)\u003c\/th\u003e\n\u003ctd\u003e130mm x 70mm x 28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eLess than 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlasher PRO\u003c\/li\u003e\n  \u003cli\u003eUSB cable\u003c\/li\u003e\n  \u003cli\u003e20-pin 0.1\" target ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal flash is 128 MB; the Flasher PRO XL has 2 GB for Linux kernels, OS images and eMMC or SD card preparation.\u003c\/li\u003e\n  \u003cli\u003eStand-alone mode on ARM Cortex targets is limited to CoreSight SoC-400 DAP setups. Microchip PIC32, Silicon Labs EFM8 and Renesas RH850 G4KH are supported in PC-based mode only.\u003c\/li\u003e\n  \u003cli\u003eThe Flasher is a production programmer, not a debug probe: SEGGER lists no ETB or ETM trace, no Cortex-M monitor mode debugging and no CMSIS-DAP mode.\u003c\/li\u003e\n  \u003cli\u003eSome target interfaces need a SEGGER adapter, for example AVR PDI, STM8 SWIM and Renesas RX FINE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFlasher PRO Compared with Other SEGGER Flasher Models\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eInternal memory\u003c\/th\u003e\n\u003cth\u003eHost and control interfaces\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlasher PRO (this product)\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-5-17-02-flasher-pro-xl-programmer\"\u003eFlasher PRO XL\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2 GB\u003c\/td\u003e\n\u003ctd\u003eUSB, RS232, Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-17-02-flasher-pro-xl-programmer\"\u003e£1,320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-5-19-00-flasher-compact-programmer\"\u003eFlasher Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-19-00-flasher-compact-programmer\"\u003e£920\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-5-16-02-flasher-portable-plus-programmer\"\u003eFlasher Portable PLUS\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e128 MB\u003c\/td\u003e\n\u003ctd\u003eUSB, 1.8\" colour display\u003c\/td\u003e\n\u003ctd\u003eLi-ion battery or USB\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-5-16-02-flasher-portable-plus-programmer\"\u003e£1,100\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eEnd-of-line programming of STM32 or NXP Cortex-M33 boards, triggered by a TTL signal from the test fixture. Programming external QSPI NOR flash alongside the MCU on the same board. Supplying a contract manufacturer with a programmer limited by Authorized Flashing to the agreed build quantity.\u003c\/p\u003e\n\u003cp\u003eChoose the Flasher PRO when a programming station needs Ethernet or RS232 control. For a fixture where space is tight and USB control is enough, the Flasher Compact is functionally identical and supports the same devices.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Flasher PRO for \u003cspan data-ds-price=\"segger-5-17-01-flasher-pro-programmer\"\u003e£1,100\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/es\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug and programming tools\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 20\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-pro\/\"\u003eSEGGER Flasher PRO product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Pro\"\u003eSEGGER Knowledge Base: Flasher Pro\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Flasher_Pro_V8\"\u003eSEGGER Knowledge Base: Flasher Pro V8\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/production\/flasher\/models\/flasher-compact\/\"\u003eSEGGER Flasher Compact product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263173325023,"sku":"5.17.01","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-flasher-pro-5-17-01-perspective-front.png?v=1794818091","url":"https:\/\/thedebugstore.com\/es\/products\/segger-5-17-01-flasher-pro-programmer","provider":"Debug Store","version":"1.0","type":"link"}