{"title":"Total Phase Accessories","description":"\u003cspan data-mce-fragment=\"1\"\u003eWelcome to The Debug Store's comprehensive collection of Total Phase Accessories. Our carefully curated selection features a diverse range of tools and peripherals designed to complement Total Phase products, empowering you with the tools necessary to tackle your debugging challenges effortlessly. From adapter boards and cables to power supplies and connectors, we offer an extensive assortment of accessories that seamlessly integrate with Total Phase devices, guaranteeing smooth operations and unparalleled accuracy.\u003c\/span\u003e","products":[{"product_id":"total-phase-tp360210-can-i2c-activity-board-pro-uk","title":"Total Phase TP360210 CAN\/I2C Activity Board Pro","description":"\u003cp\u003eThe Total Phase \u003cstrong\u003eCAN\/I2C Activity Board Pro\u003c\/strong\u003e is the ideal tool for the embedded systems developer working with CAN and I2C protocols. This board provides known-good target devices to help developers get up and running quickly.\u003c\/p\u003e\n\n\u003cp\u003eTarget devices featured on this activity board can operate as CAN nodes or I2C slaves. The CAN\/I2C Activity Board Pro is compatible with the Komodo™ CAN Solo interface, the Komodo™ CAN Duo interface, and the Aardvark™ I2C\/SPI Host Adapter.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eTest and debug with known working CAN and I2C slave devices.\u003c\/li\u003e\n    \u003cli\u003eInterface directly with the Komodo™ CAN Solo Interface, the Komodo™ CAN Duo Interface or the Aardvark™ I2C\/SPI Host Adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTargets\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDigital-to-Analog Converter (DAC)\u003cbr\u003e\n    DAC081C085 Single Channel 8-bit Digital-to-Analog Converter (NXP Semiconductors)\u003c\/li\u003e\n    \u003cli\u003eMotion Sensor\u003cbr\u003e\n    LIS33DE 3-axis Linear Accelerometer (ST Microelectronics)\u003c\/li\u003e\n    \u003cli\u003eLight Sensor\u003cbr\u003e\n    APDS-9300 Ambient Light Photo Sensor (Avago Technologies)\u003c\/li\u003e\n    \u003cli\u003ePort Expander #1\u003cbr\u003e\n    PCA9554AD 8-pin Port Expander with pins configured as inputs or outputs (NXP Semiconductors)\u003c\/li\u003e\n    \u003cli\u003eJoystick, LEDs, and Port Expander #2\u003cbr\u003e\n    TPA511GLFS 2-axis Joystick with five output pins (C\u0026amp;K Components)\u003cbr\u003e\n    PCA9554AD Port Expander communicates the status over CAN and I2C (NXP Semiconductors)\u003c\/li\u003e\n    \u003cli\u003eAnalog-to-Digital Converter (ADC)\u003cbr\u003e\n    AT90CAN32 8-bit ADC on the AT90CAN32 MCU (Atmel)\u003c\/li\u003e\n    \u003cli\u003eLCD Display\u003cbr\u003e\n    NHD-0208AZ-RN-YBW 2x8 character LCD Display Module (Newhaven Display International)\u003c\/li\u003e\n    \u003cli\u003eTemperature Sensor\u003cbr\u003e\n    DS75 Digital Thermometer and Thermostat (-55°C to °C) (Maxim Integrated Products)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eExample Code\u003c\/h3\u003e\n\n\u003cp\u003eExample code for the CAN\/I2C Activity Board Pro is available in C, C#, Python, .NET, VB.NET, and VB6 as part of the Komodo™ Software API and Shared Library package in the Downloads section of this website. README.txt files are included in the package to explain each of the examples.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317272253,"sku":"TP360210","price":175.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-evaluation-board-can-i2c-activity-board-pro-28942747861181.jpg?v=1684991458"},{"product_id":"total-phase-tp360410-can-bus-breakout-cable","title":"Total Phase TP360410 CAN Bus Split Cable","description":"\u003cp\u003eThis cable is useful to tap an existing CAN network with the Komodo™ CAN Solo or Komodo™ CAN Duo Interface.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317305021,"sku":"TP360410","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-can-bus-breakout-cable-28938589929661.jpg?v=1685099999"},{"product_id":"total-phase-tp360310-can-bus-terminator-uk","title":"Total Phase CAN Bus Terminator","description":"","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317337789,"sku":"TP360310","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp360310-total-phase-can-bus-terminator-tp360310-72356340367735.png?v=1732757867"},{"product_id":"tp320710-total-phase-digital-i-o-cable-uk","title":"Total Phase TP320710 Digital I\/O Cable","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cp\u003eThe Digital IO Cable with 9 -Grabber Clips (GND and 8 - signals) offers Beagle™ USB 480 and 5000 Protocol Analysers and Komodo™ CAN Duo Interface users the convenience of having grabber clips to connect to external logic signals.\u003c\/p\u003e\n\n\u003cp\u003eEach individual lead is a different colour and is labelled with the pin name so that they are easy to identify. The grabber clip is nominally 44mm long. The cap body width is 2.54mm wide and roughly 21.5mm long. The hook of the grabber clip is 0.51mm wide with a maximum opening of 3.18mm.\u003c\/p\u003e\n\n\u003cp\u003eThe connector is a standard Mini-DIN9 connector to interface with the Digital IO port on the Beagle™ USB 480 and 5000 Protocol Analysers and the Komodo™ CAN Solo\/Duo Interface.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317436093,"sku":"TP320710","price":115.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-digital-i-o-cable-28938617749693.jpg?v=1685098912"},{"product_id":"total-phase-tp240810-dvi-ddc-breakout-cable","title":"Total Phase TP240810 DVI DDC Breakout Cable","description":"\u003cp\u003eThe DVI DDC Breakout Cable is a standard 2 metre DVI-D single link cable (DVI-male to DVI-male) with an additional 5x2 0.100\" pitch keyed box connector to provide a convenient way to access the Display Data Channel (DDC) lines with a Beagle™ I2C\/SPI Protocol Analyser or an Aardvark™ I2C\/SPI Host Adapter\u003c\/p\u003e\n\n\u003ctable border=\"0\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px;\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp\u003e \u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd\u003e\n            \u003ctable style=\"border-spacing:0px;font-size:13px;font-family:arial, helvetica, 'Luxi Sans', sans-serif;font-style:normal;font-variant:normal;font-weight:normal;letter-spacing:normal;line-height:16px;text-align:left;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;\"\u003e\n                \u003ctbody\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003eDVI Pin\u003c\/strong\u003e\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003e10-pin Header Pin\u003c\/strong\u003e\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SCL\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 6\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 1\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SDA\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 7\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 3\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC GND\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 15\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 2\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e .\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317599933,"sku":"TP240810","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-dvi-ddc-breakout-cable-23151993651389.jpg?v=1685009283"},{"product_id":"total-phase-flash-eprom-socket-board-tp240511","title":"Total Phase TP240511 Flash EPROM Socket Board - I2C\/SPI Memory Programming","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional I2C and SPI EEPROM Programming Solution\u003c\/h2\u003e \u003cp\u003eThe Total Phase TP240511 Flash EPROM Socket Board provides embedded systems engineers with a professional, cost-effective solution for programming I2C and SPI-based memory devices. This versatile programming board supports standard chip packages including DIP8, SOIC8, and TSSOP8, making it an essential tool for development, debugging, and production environments.\u003c\/p\u003e \u003ch3\u003eKey Programming Capabilities\u003c\/h3\u003e \u003cp\u003eCompatible with Total Phase's industry-leading host adapters and Flash Center software, this socket board enables rapid programming of Serial EEPROM and Flash memory chips. The board works seamlessly with the Aardvark I2C\/SPI Host Adapter and Cheetah SPI Host Adapter to deliver professional programming capabilities.\u003c\/p\u003e \u003cdiv class=\"tbl\"\u003e \u003ch4\u003eSupported Package Types\u003c\/h4\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003ePackage\u003c\/th\u003e\n\u003cth\u003ePin Count\u003c\/th\u003e\n\u003cth\u003eUse Case\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eDIP8\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eThrough-hole prototyping\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSOIC8\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eSurface-mount programming\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTSSOP8\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eHigh-density surface-mount\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003c\/div\u003e \u003ch3\u003eFlexible Power Options\u003c\/h3\u003e \u003cp\u003eThe board provides multiple power supply options including 5V, 3.3V, or external VDD source at any voltage level, ensuring compatibility with a wide range of memory devices and system requirements.\u003c\/p\u003e \u003cdiv class=\"aside\"\u003e \u003cstrong\u003eGang Programming Support:\u003c\/strong\u003e Program multiple devices simultaneously by using multiple socket boards and programming adapters in parallel on the same host computer, ideal for production environments. \u003c\/div\u003e \u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e \u003cp\u003eThe included 8-pin split ribbon cable allows flexible pin configuration to accommodate different memory chip layouts. Connect pins to appropriate sources using the clearly marked pin diagram on the board.\u003c\/p\u003e \u003cdiv class=\"imgph\"\u003eEEPROM socket board pinout diagram placeholder\u003c\/div\u003e \u003ch3\u003eCompatible Memory Types\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eI2C EEPROM devices (24C series)\u003c\/li\u003e \u003cli\u003eSPI EEPROM devices (25C series)\u003c\/li\u003e \u003cli\u003eSPI Flash memory chips\u003c\/li\u003e \u003cli\u003eSerial NOR Flash devices\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eEssential Components Included\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eEEPROM Socket Board TP240511\u003c\/li\u003e \u003cli\u003e8-pin split ribbon cable\u003c\/li\u003e \u003cli\u003eComprehensive user manual\u003c\/li\u003e \u003c\/ul\u003e \u003c\/section\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317665469,"sku":"TP240511","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-evaluation-board-eeprom-socket-board-28942777090237.jpg?v=1685155802"},{"product_id":"tp280210-high-speed-spi-flash-demo-board-total-phase-uk","title":"Total Phase TP280210 High-Speed SPI Flash Demo Board","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides known working SPI flash memory for testing and debugging purposes.\u003c\/li\u003e\n\u003cli\u003eAllows an easy connection between a Cheetah™ SPI Host Adapter and an Aardvark™ I2C\/SPI Host Adapter or a Beagle™ I2C\/SPI Protocol Analyser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTarget\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPI Flash Memory\u003c\/strong\u003e\u003cbr\u003eM25P32 32 Mbit, Low Voltage, Serial Flash Memory With 50MHz SPI Bus Interface (Numonyx)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317698237,"sku":"TP280210","price":89.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-evaluation-board-high-speed-spi-flash-demo-board-28942921007293.jpg?v=1685096756"},{"product_id":"total-phase-tp240710-hdmi-ddc-breakout-cable","title":"Total Phase TP240710 HDMI DDC Breakout Cable","description":"\u003cp\u003eThe HDMI DDC Breakout Cable is a standard 2 metre HDMI cable (HDMI-male to HDMI-male) with an additional 5x2 0.100\" pitch keyed box connector to provide a convenient way to access the Display Data Channel (DDC) lines with a Beagle™ I2C\/SPI Protocol Analyser or an Aardvark™ I2C\/SPI Host Adapter.\u003c\/p\u003e\n\n\u003ctable border=\"0\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px;\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp\u003e \u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd\u003e\n            \u003ctable style=\"border-spacing:0px;font-size:13px;font-family:arial, helvetica, 'Luxi Sans', sans-serif;font-style:normal;font-variant:normal;font-weight:normal;letter-spacing:normal;line-height:16px;text-align:left;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;\"\u003e\n                \u003ctbody\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003eHDMI Pin\u003c\/strong\u003e\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003e10-pin Header Pin\u003c\/strong\u003e\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SCL\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 15\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 1\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SDA\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 16\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 3\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC GND\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 17\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 2\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317862077,"sku":"TP240710","price":108.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-hdmi-ddc-breakout-cable-23152019701949.jpg?v=1685026738"},{"product_id":"total-phase-tp240610-level-shifter-board-uk","title":"Total Phase Level Shifter Board (TP240610)","description":"\u003cp\u003eThe \u003cstrong\u003eLevel-Shifter Board\u003c\/strong\u003e allows to your perform level shifting for I2C, SPI, and MDIO signals and supports voltage levels of 1.2V, 1.5V, 1.8V, 2.5V, 3.0V, and 3.3V\u003cstrong\u003e. \u003c\/strong\u003eIt can be used to supply power to downstream devices and transfers I2C signals at a speed of 800 kHz and SPI and MDIO signal at speeds of 20 MHz.\u003c\/p\u003e\n\u003cp\u003eThe board has two connectors for connecting to the target interface and two additional connectors to connect an Aardvark™\/Cheetah™ Host Adapter and a Beagle™ Protocol Analyser. The board needs to be powered at the Host\/Analyser interface by a 5V power supply. This is normally supplied by the Host Adapter or Analyser. The Target interface is powered either from the Target interface itself or from the Host end via a set of jumper selectable voltages.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317993149,"sku":"TP240610","price":175.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp240610-total-phase-level-shifter-board-tp240610-for-logic-level-issues-43160360222943.png?v=1722899268"},{"product_id":"total-phase-tp320610-usb-mini-otg-cable-set","title":"Total Phase TP320610 USB Mini OTG Cable Set","description":"\u003cp\u003eThe short lengths of these cables ensure that the total cable length between host and device stays below the specified minimum to avoid data timing issues.\u003c\/p\u003e\n\n\u003cp\u003eThese cables are rated for high-speed data transmission.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318156989,"sku":"TP320610","price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-usb-mini-otg-cable-set-28938642423997.jpg?v=1685180999"},{"product_id":"total-phase-tp321510-sma-cable-for-beagle-usb-5000","title":"Total Phase TP321510 SMA Cable for Beagle USB 5000","description":"\u003ch3\u003eSpecification\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eWhite coaxial cable (RG-316 DS)\u003c\/li\u003e\n    \u003cli\u003eSMA straight plug to SMA straight plug\u003c\/li\u003e\n    \u003cli\u003eConnector impedance: 50 Ωs\u003c\/li\u003e\n    \u003cli\u003eFrequency: 12.4 GHz\u003c\/li\u003e\n    \u003cli\u003eLength: 609.6 mm (24\")\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318189757,"sku":"TP321510","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-sma-cable-for-beagle-usb-5000-28943063744701.jpg?v=1685135996"},{"product_id":"tp280310-flash-soic8-socket-board-total-phase-uk","title":"Total Phase TP280310 Flash SOIC8 Socket Board","description":"\u003cp\u003eThe Flash SOIC-8 Socket Board provides embedded systems engineers with an easy and cost-effective method of programming SPI-based Serial Flash chips using Total Phases Cheetah™SPI Host Adapter and the Flash CenterSoftware.\u003c\/p\u003e\n\n\u003cp\u003eDetailed technical information about the Flash SOIC-8 Socket Board can be found in the User Manual.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318255293,"sku":"TP280310","price":88.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-evaluation-board-flash-soic8-socket-board-23151997681853.jpg?v=1685154351"},{"product_id":"total-phase-tp-240212-10-pin-split-cable-uk","title":"Total Phase TP240212 10 pin Split Cable","description":"\u003cp\u003eThe Total Phase TP240212 cable is for connecting the Aardvark™, Beagle™ or Cheetah™ to header pins or IC legs on your target boards.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318353597,"sku":"TP240212","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp240212-total-phase-10-pin-split-cable-tp240212-72356315726199.png?v=1732757875"},{"product_id":"total-phase-tp240411-split-cable-with-grabbers-uk","title":"Total Phase TP240411 Split Cable with Grabbers","description":"\u003cp\u003eThe 10-Pin Grabber Clip Split Cable has a 10-pin box header that attaches to the ribbon cable. Each individual lead has a different colour and is labelled with the pin name so that they are easy to identify.\u003c\/p\u003e\n\n\u003cp\u003e10 - individually colour coded grabber clips are included:.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Grabber Probe Clips\" class=\"fr-fic fr-dii\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"http:\/\/www.thedebugstore.com\/files\/Images\/Inline\/Inline-Probe-Drawing-1.jpg\" style=\"width:300px;height:127px;\"\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe connector is a standard 5x2 0.100\" (2.54mm) pitch IDC type keyed box connector. Each individual lead is terminated with a single pin crimp connector with the same 0.100\" (2.54mm) pitch. The cable is only 5\" (12.7cm) long to minimize signal degradation.\u003c\/p\u003e\n\n\u003ch3\u003eUniversal Use\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e10-Pin Grabber Clip Split Cable\u003c\/strong\u003e is an incredibly useful tool that will save you from having to create or purchase adapter boards for your 10-pin ribbon cable. Although it is labelled with the Aardvark™ I2C\/SPI Host Adapter and Beagle™ I2C\/SPI Protocol Analyser specific pinout, this split cable is universally adaptable to a variety of applications.\u003c\/p\u003e\n\n\u003cp\u003eThis split cable will connect to any standard 0.100\" (2.54mm) pitch 10-pin keyed female IDC-type connector.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318386365,"sku":"TP240411","price":70.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-total-phase-tp240411-split-cable-with-grabbers-38321715445983.jpg?v=1685072283"},{"product_id":"total-phase-tp240910-vga-ddc-breakout-cable","title":"Total Phase TP240910 VGA DDC Breakout Cable","description":"\u003cp\u003eThe VGA DDC Breakout Cable is a standard 2 metre VGA cable (HD15-male to HD15-male) with an additional 5x2 0.100\" pitch keyed box connector to provide a convenient way to access the Display Data Channel (DDC) lines with a Beagle™ I2C\/SPI Protocol Analyser or an Aardvark™ I2C\/SPI Host Adapter.\u003c\/p\u003e\n\n\u003ctable style=\"border-spacing:0px;font-size:13px;font-family:arial, helvetica, 'Luxi Sans', sans-serif;font-style:normal;font-variant:normal;font-weight:normal;letter-spacing:normal;line-height:16px;text-align:left;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003eVGA Pin\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003e10-pin Header Pin\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SCL\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 15\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 1\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SDA\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 12\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 3\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC GND\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 10\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 2\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318451901,"sku":"TP240910","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp240910-total-phase-vga-ddc-breakout-cable-tp240910-72357991874935.png?v=1732757878"},{"product_id":"total-phase-tp322310-hdmi-m-m-cable","title":"Total Phase TP322310 HDMI M\/M Cable","description":"\u003cp style=\"margin:0px 0px 1em;padding:0px;line-height:1.2em;font-size:13px;font-family:arial, helvetica, 'Luxi Sans', sans-serif;font-style:normal;font-variant:normal;font-weight:normal;letter-spacing:normal;text-align:left;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;\"\u003eHDMI M\/M cable with the following specifications:.\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003eHDMI male to HDMI male\u003c\/li\u003e\n    \u003cli\u003eLength: 0.9m (3 ft)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768322449597,"sku":"TP322310","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-hdmi-m-m-cable-23152019833021.jpg?v=1685026903"},{"product_id":"tp282310-flash-soic8-socket-board-10-34-total-phase-uk","title":"Total Phase TP282310 Flash SOIC8 Socket Board 10-34","description":"\u003cp\u003eThe Flash SOIC-8 Socket Board provides embedded systems engineers with an easy and cost-effective method of programming SPI-based Serial Flash chips using Total Phases Cheetah™SPI Host Adapter and the Flash CenterSoftware.\u003c\/p\u003e\n\n\u003cp\u003eDetailed technical information about the Flash SOIC-8 Socket Board can be found in the Specification section and in the User Manual.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Flash SOIC-8 Socket Board Pinout\" class=\"fr-fic fr-dii\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"http:\/\/www.thedebugstore.com\/files\/Images\/Inline\/soic8-pinout.jpg\"\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFigure 2: Supported SOIC-8 Pinout\u003c\/em\u003e.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768333689021,"sku":"TP282310","price":114.4,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-evaluation-board-flash-soic8-socket-board-10-34-28942865531069.jpg?v=1685017907"},{"product_id":"total-phase-tp320310-extension-cable-for-beagle-usb-12-6","title":"Total Phase TP320310 Extension Cable for Beagle USB 12 6\"","description":"\u003cp\u003eConnect USB devices with captive USB-A connectors quickly and easily to the Beagle USB 12 Protocol Analyzer or the Beagle USB 480 Protocol Analyzer with the USB Extension Cable.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768365637821,"sku":"TP320310","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-extension-cable-for-beagle-usb-12-6-28938487038141.jpg?v=1685098553"},{"product_id":"beagle-usb-5000-power-adapter-eu-total-phase-uk","title":"Total Phase Power Adapter for Beagle USB 5000 - EU","description":"\u003cp\u003eBeagle™ USB 5000 power adapter - EU.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768365670589,"sku":"TP322010","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-power-supply-power-adapter-for-beagle-usb-5000-eu-28938602414269.jpg?v=1685115297"},{"product_id":"total-phase-tp321110-usb-a-b-cable-1ft-5-pack-uk","title":"Total Phase TP321110 USB A-B cable (1ft) - 5 Pack","description":"\u003cp\u003eUSB A-B cable (1ft) - 5 Pack.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768365736125,"sku":"TP321110","price":49.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-usb-a-b-cable-1ft-5-pack-23152200220861.jpg?v=1685181169"},{"product_id":"tp600110-i2c-active-level-1-application-total-phase-uk","title":"Total Phase PROMIRA I2C Active - Level 1 Application","description":"\u003cp\u003eThe Promira I2C Active Level 1 Application (TP600110) turns a Total Phase Promira Serial Platform into an I2C host adapter running as master or slave from 1 kHz to 1 MHz, covering Standard mode through Fast-mode Plus. It adds multi-master support, a slave response of up to 256 bytes and six configurable GPIO, and works with SMBus, PMBus, DDC, IPMI and TWI devices. It is the entry licence for I2C firmware bring-up, EEPROM programming and peripheral emulation on the Promira.\u003c\/p\u003e\n\n\u003ch2\u003eI2C Master and Slave to 1 MHz\u003c\/h2\u003e\n\u003cp\u003eAs a master, Level 1 transmits and receives at any rate from 1 kHz to 1 MHz, with repeated start, 10-bit slave addressing and inter-bit and inter-byte clock stretching. Multi-master support lets the Promira share a bus with a target CPU, which is how you test what happens when two controllers contend for the same peripheral. At 1 MHz the Promira runs Fast-mode Plus parts at their rated speed, above the 800 kHz ceiling of the \u003ca href=\"\/es\/products\/total-phase-tp240141-aardvark-i2c-spi-interface\"\u003eAardvark\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eEmulate an I2C Peripheral Before the Silicon Arrives\u003c\/h2\u003e\n\u003cp\u003eIn slave mode the Promira answers a master with a single response of up to 256 bytes, and slave transmit and receive run asynchronously, so the host firmware sees a device that behaves like the real part rather than a blocking stub. Software-configurable pull-ups and target power pins mean a small sensor board can be brought up straight from the adapter. That lets firmware teams write and test I2C drivers against an emulated sensor, EEPROM or power controller while the hardware is still at the fab.\u003c\/p\u003e\n\n\u003ch2\u003eSMBus, PMBus and IPMI Compatible\u003c\/h2\u003e\n\u003cp\u003eLevel 1 is compatible with DDC, SMBus, PMBus, SBBus, IPMI and TWI, so the same licence reads voltage regulators over PMBus, talks to a BMC over IPMI and programs an EDID EEPROM over DDC. Up to six GPIO are available, four while the I2C pins are in use, for driving reset and interrupt lines alongside the bus.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and API\u003c\/h2\u003e\n\u003cp\u003eControl Center Serial gives interactive control of the bus and GPIO. Flash Center programs and verifies I2C and SPI memory devices (Windows and Linux). The free Promira Software API covers C, C#, Python, .NET, VB.NET and VB6, with a LabVIEW driver for test stations, and the Promira Aardvark Wrapper API runs code written for the Aardvark API while you port it. Promira software runs on Windows 10 and 11, Linux and macOS 13 or later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eI2C master and slave (Active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI2C master speed\u003c\/th\u003e\n\u003ctd\u003e1 kHz to 1 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI2C slave speed\u003c\/th\u003e\n\u003ctd\u003e1 kHz to 1 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModes\u003c\/th\u003e\n\u003ctd\u003eStandard mode to Fast-mode Plus; any rate from 1 kHz to 1 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave response\u003c\/th\u003e\n\u003ctd\u003eUp to 256 bytes, asynchronous slave transmit and receive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAddressing\u003c\/th\u003e\n\u003ctd\u003e10-bit slave addressing, repeated start\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClock stretching\u003c\/th\u003e\n\u003ctd\u003eInter-bit and inter-byte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible protocols\u003c\/th\u003e\n\u003ctd\u003eDDC, SMBus, PMBus, SBBus, IPMI, TWI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfigurable GPIO\u003c\/th\u003e\n\u003ctd\u003eUp to 6 (4 while using I2C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost platform\u003c\/th\u003e\n\u003ctd\u003ePromira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eControl Center Serial, Flash Center, Promira Software API, LabVIEW driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eTP600110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a software licence only. It runs on the \u003ca href=\"\/es\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform\u003c\/a\u003e (\u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk\"\u003e£1,040\u003c\/span\u003e ex VAT), which is sold separately and must be in place before the licence can be installed.\u003c\/li\u003e\n\u003cli\u003eLevel 1 stops at 1 MHz. High-speed mode (3.4 MHz) needs the \u003ca href=\"\/es\/products\/tp600210-i2c-active-level-2-application-total-phase-uk\"\u003eI2C Active Level 2\u003c\/a\u003e licence, which is installed on top of Level 1.\u003c\/li\u003e\n\u003cli\u003eThis licence drives the bus. To capture traffic between two live devices without taking part, add the \u003ca href=\"\/es\/products\/total-phase-promira-i2c-active-analysis-application\"\u003eI2C Analysis\u003c\/a\u003e application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhich I2C Option Should You Choose?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eAardvark I2C\/SPI Host Adapter\u003c\/th\u003e\n\u003cth\u003ePromira I2C Active Level 1\u003c\/th\u003e\n\u003cth\u003ePromira I2C Active Level 2\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI2C master and slave\u003c\/th\u003e\n\u003ctd\u003eTo 800 kHz\u003c\/td\u003e\n\u003ctd\u003e1 kHz to 1 MHz\u003c\/td\u003e\n\u003ctd\u003eTo 3.4 MHz (High-speed mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfigurable GPIO\u003c\/th\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e6 (4 while using I2C)\u003c\/td\u003e\n\u003ctd\u003e12 (10 while using I2C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost connection\u003c\/th\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrerequisite\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003ePromira Serial Platform\u003c\/td\u003e\n\u003ctd\u003ePlatform plus I2C Active Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"total-phase-tp240141-aardvark-i2c-spi-interface\"\u003e£335\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan data-ds-price=\"tp600110-i2c-active-level-1-application-total-phase-uk\"\u003e£120\u003c\/span\u003e plus platform\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan data-ds-price=\"tp600210-i2c-active-level-2-application-total-phase-uk\"\u003e£650\u003c\/span\u003e plus Level 1 and platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf 800 kHz is enough and you do not need Ethernet, the Aardvark is the lower-cost I2C host adapter. Choose the Promira with Level 1 when you need Fast-mode Plus at 1 MHz, Ethernet control from a production rack, or a platform that can grow into SPI and analysis later.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eProgramming 24-series I2C EEPROMs on assembled boards at 1 MHz. Emulating a PMBus voltage regulator so power-sequencing firmware can be tested without the regulator fitted. Scripting I2C register regression tests in Python on a test station, with the Promira controlled over Gigabit Ethernet.\u003c\/p\u003e\n\u003cp\u003eLevel 1 suits firmware engineers doing I2C driver bring-up, test engineers building automated fixtures, and production engineers programming I2C memory in line.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Promira I2C Active Level 1 Application from \u003cspan data-ds-price=\"tp600110-i2c-active-level-1-application-total-phase-uk\"\u003e£120\u003c\/span\u003e ex VAT. For a formal quotation, or a platform and licence bundle, \u003ca href=\"\/es\/pages\/contact-us\"\u003erequest a quote from our team\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 5 October 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 Total Phase pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/i2c-active1\/\"\u003eI2C Active Level 1 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/i2c-active2\/\"\u003eI2C Active Level 2 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-serial\/\"\u003ePromira Serial Platform\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-software-api-i2cspi\/\"\u003ePromira Software API\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/control-center-serial\/\"\u003eControl Center Serial\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/support\/articles\/204227283-promira-serial-platform-system-user-manual\/\"\u003ePromira Serial Platform System User Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768388378813,"sku":"TP600110","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-software-total-phase-promira-i2c-active-level-1-application-36504069112031.jpg?v=1684962113"},{"product_id":"tp600210-i2c-active-level-2-application-total-phase-uk","title":"Total Phase PROMIRA I2C Active - Level 2 Application","description":"\u003cp\u003eThe Promira I2C Active Level 2 Application (TP600210) raises a Total Phase Promira Serial Platform to High-speed mode I2C, running master and slave at up to 3.4 MHz. It doubles the configurable GPIO to twelve (ten while using I2C) and keeps everything in Level 1: multi-master support, a 256-byte slave response, clock stretching and SMBus, PMBus and IPMI compatibility. It is the licence for validating and programming High-speed mode I2C parts at their rated clock.\u003c\/p\u003e\n\n\u003ch2\u003eHigh-Speed Mode I2C to 3.4 MHz\u003c\/h2\u003e\n\u003cp\u003eAs a High-speed I2C host adapter, Level 2 drives and answers the bus in Standard mode, Fast-mode Plus (1 Mbps) and High-speed mode (3.4 MHz). Testing an HS-mode sensor or memory at 3.4 MHz shows the timing margins and bus loading of the real design, which a 400 kHz or 1 MHz adapter cannot reveal. It also cuts programming time on large I2C EEPROMs, where a higher clock directly shortens the cycle on a production line.\u003c\/p\u003e\n\n\u003ch2\u003eTwelve GPIO for Fixtures and Side-Band Signals\u003c\/h2\u003e\n\u003cp\u003eUp to twelve configurable GPIO, ten while the I2C pins are in use, let one Promira drive resets, interrupts, enable lines and strapping pins while it talks to the device under test. On a test fixture that removes a second I\/O card and keeps bus traffic and control signals under one API and one timebase.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt on I2C Active Level 1\u003c\/h2\u003e\n\u003cp\u003eLevel 2 is installed on top of the \u003ca href=\"\/es\/products\/tp600110-i2c-active-level-1-application-total-phase-uk\"\u003eI2C Active Level 1\u003c\/a\u003e licence, which Total Phase lists as a prerequisite. Everything Level 1 does carries over: multi-master transmit and receive, asynchronous slave transmit and receive with a response of up to 256 bytes, 10-bit addressing, repeated start, inter-bit and inter-byte clock stretching, and DDC, SMBus, PMBus, SBBus, IPMI and TWI compatibility.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and API\u003c\/h2\u003e\n\u003cp\u003eControl Center Serial gives interactive control of the bus and GPIO. Flash Center programs and verifies I2C and SPI memory devices (Windows and Linux). The free Promira Software API covers C, C#, Python, .NET, VB.NET and VB6, with a LabVIEW driver for test stations, and the Promira Aardvark Wrapper API runs code written for the Aardvark API while you port it. Promira software runs on Windows 10 and 11, Linux and macOS 13 or later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eI2C master and slave (Active), High-speed mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI2C master and slave speed\u003c\/th\u003e\n\u003ctd\u003eUp to 3.4 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModes\u003c\/th\u003e\n\u003ctd\u003eStandard mode, Fast-mode Plus (1 Mbps), High-speed mode (3.4 MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave response\u003c\/th\u003e\n\u003ctd\u003eUp to 256 bytes, asynchronous slave transmit and receive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible protocols\u003c\/th\u003e\n\u003ctd\u003eDDC, SMBus, PMBus, SBBus, IPMI, TWI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfigurable GPIO\u003c\/th\u003e\n\u003ctd\u003eUp to 12 (10 while using I2C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrerequisite\u003c\/th\u003e\n\u003ctd\u003eI2C Active Level 1 Application (TP600110)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost platform\u003c\/th\u003e\n\u003ctd\u003ePromira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eControl Center Serial, Flash Center, Promira Software API, LabVIEW driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eTP600210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a software licence only. It runs on the \u003ca href=\"\/es\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform\u003c\/a\u003e (\u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk\"\u003e£1,040\u003c\/span\u003e ex VAT), which is sold separately and must be in place before the licence can be installed.\u003c\/li\u003e\n\u003cli\u003eLevel 2 requires the I2C Active Level 1 licence (\u003cspan data-ds-price=\"tp600110-i2c-active-level-1-application-total-phase-uk\"\u003e£120\u003c\/span\u003e ex VAT) on the same Promira. From a bare platform the two I2C licences total \u003cspan data-ds-price=\"tp600110-i2c-active-level-1-application-total-phase-uk+tp600210-i2c-active-level-2-application-total-phase-uk\"\u003e£770\u003c\/span\u003e ex VAT, plus the platform.\u003c\/li\u003e\n\u003cli\u003eIf your devices run at 1 MHz or below and six GPIO are enough, Level 1 alone does the job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhich I2C Option Should You Choose?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eAardvark I2C\/SPI Host Adapter\u003c\/th\u003e\n\u003cth\u003ePromira I2C Active Level 1\u003c\/th\u003e\n\u003cth\u003ePromira I2C Active Level 2\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI2C master and slave\u003c\/th\u003e\n\u003ctd\u003eTo 800 kHz\u003c\/td\u003e\n\u003ctd\u003e1 kHz to 1 MHz\u003c\/td\u003e\n\u003ctd\u003eTo 3.4 MHz (High-speed mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfigurable GPIO\u003c\/th\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e6 (4 while using I2C)\u003c\/td\u003e\n\u003ctd\u003e12 (10 while using I2C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost connection\u003c\/th\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrerequisite\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003ePromira Serial Platform\u003c\/td\u003e\n\u003ctd\u003ePlatform plus I2C Active Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"total-phase-tp240141-aardvark-i2c-spi-interface\"\u003e£335\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan data-ds-price=\"tp600110-i2c-active-level-1-application-total-phase-uk\"\u003e£120\u003c\/span\u003e plus platform\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan data-ds-price=\"tp600210-i2c-active-level-2-application-total-phase-uk\"\u003e£650\u003c\/span\u003e plus Level 1 and platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eA High-speed I2C host adapter earns its price when the part on your board is specified for High-speed mode, or when a fixture needs more than six GPIO. For Fast-mode Plus and below, stay with Level 1.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eCharacterising a 3.4 MHz HS-mode temperature sensor against its datasheet timing. Programming large I2C EEPROMs at High-speed mode to shorten production cycle time. Running a PMBus power-sequencing test that also toggles enable and power-good lines from the Promira's GPIO.\u003c\/p\u003e\n\u003cp\u003eLevel 2 suits hardware validation engineers working with HS-mode parts, and test engineers building fixtures that need bus control and side-band I\/O from one adapter.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Promira I2C Active Level 2 Application from \u003cspan data-ds-price=\"tp600210-i2c-active-level-2-application-total-phase-uk\"\u003e£650\u003c\/span\u003e ex VAT. For a formal quotation covering the platform and both I2C licences, \u003ca href=\"\/es\/pages\/contact-us\"\u003erequest a quote from our team\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 5 October 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 Total Phase pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/i2c-active2\/\"\u003eI2C Active Level 2 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/i2c-active1\/\"\u003eI2C Active Level 1 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-serial\/\"\u003ePromira Serial Platform\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-software-api-i2cspi\/\"\u003ePromira Software API\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/control-center-serial\/\"\u003eControl Center Serial\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/support\/articles\/204227283-promira-serial-platform-system-user-manual\/\"\u003ePromira Serial Platform System User Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768388411581,"sku":"TP600210","price":650.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-software-i2c-active-level-2-application-28942980513981.jpg?v=1685146442"},{"product_id":"tp600510-spi-active-level-1-application-total-phase-uk","title":"Total Phase PROMIRA SPI Active - Level 1 Application","description":"\u003cp\u003eThe Promira SPI Active Level 1 Application (TP600510) turns a Total Phase Promira Serial Platform into an SPI host adapter running as master from 31 kHz to 12.5 MHz and as slave from 31 kHz to 8 MHz. It provides full-duplex master transmit and receive, a slave response of up to 256 bytes, configurable slave-select polarity and one slave select. It is the entry licence for SPI flash programming, peripheral emulation and driver bring-up on the Promira.\u003c\/p\u003e\n\n\u003ch2\u003eSPI Master to 12.5 MHz, Slave to 8 MHz\u003c\/h2\u003e\n\u003cp\u003eAs a master, Level 1 clocks out and reads back in the same full-duplex transaction, so register reads and flash commands behave exactly as they will from the target MCU. At 12.5 MHz the master runs faster than the Aardvark's 8 MHz, and the 8 MHz slave mode is double the Aardvark's 4 MHz. The single slave select is configurable and shared with GPIO, and its polarity is set in software in master mode.\u003c\/p\u003e\n\n\u003ch2\u003eSPI Slave Emulation With a 256-Byte Response\u003c\/h2\u003e\n\u003cp\u003eIn slave mode the Promira returns a response of up to 256 bytes to the master,. Firmware engineers use this to stand in for an ADC, display controller or sensor while the real part is unavailable, and to feed the host MCU known data patterns when debugging its SPI driver.\u003c\/p\u003e\n\n\u003ch2\u003eProgram SPI Flash With Flash Center\u003c\/h2\u003e\n\u003cp\u003eWith Level 1 installed, Flash Center reads, erases, programs and verifies SPI serial flash and EEPROM on a target board, and the Promira Software API scripts the same operations for production. Up to six GPIO, two while the SPI pins are in use, can hold a target in reset or control write-protect during programming.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and API\u003c\/h2\u003e\n\u003cp\u003eControl Center Serial gives interactive control of the bus and GPIO. Flash Center programs and verifies I2C and SPI memory devices (Windows and Linux). The free Promira Software API covers C, C#, Python, .NET, VB.NET and VB6, with a LabVIEW driver for test stations, and the Promira Aardvark Wrapper API runs code written for the Aardvark API while you port it. Promira software runs on Windows 10 and 11, Linux and macOS 13 or later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eSPI master and slave (Active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI master speed\u003c\/th\u003e\n\u003ctd\u003e31 kHz to 12.5 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI slave speed\u003c\/th\u003e\n\u003ctd\u003e31 kHz to 8 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI\/O mode\u003c\/th\u003e\n\u003ctd\u003eSingle I\/O, full-duplex master\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave selects\u003c\/th\u003e\n\u003ctd\u003e1, configurable, shared with GPIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave response\u003c\/th\u003e\n\u003ctd\u003eUp to 256 bytes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSS polarity\u003c\/th\u003e\n\u003ctd\u003eSoftware configurable in master mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfigurable GPIO\u003c\/th\u003e\n\u003ctd\u003eUp to 6 (2 while using SPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost platform\u003c\/th\u003e\n\u003ctd\u003ePromira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eControl Center Serial, Flash Center, Promira Software API, LabVIEW driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eTP600510\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a software licence only. It runs on the \u003ca href=\"\/es\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform\u003c\/a\u003e (\u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk\"\u003e£1,040\u003c\/span\u003e ex VAT), which is sold separately and must be in place before the licence can be installed.\u003c\/li\u003e\n\u003cli\u003eLevel 1 is single I\/O only. Dual I\/O starts at \u003ca href=\"\/es\/products\/tp600610-spi-active-level-2-application-total-phase-uk\"\u003eSPI Active Level 2\u003c\/a\u003e; quad I\/O needs \u003ca href=\"\/es\/products\/tp600710-spi-active-level-3-application-total-phase-uk\"\u003eSPI Active Level 3\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eOne slave select. For two or three devices on the bus without rewiring, choose Level 2.\u003c\/li\u003e\n\u003cli\u003eThis licence drives the bus. To monitor SPI traffic between two live devices, add \u003ca href=\"\/es\/products\/total-phase-promira-spi-active-level-1-analysis-application\"\u003eSPI Analysis Level 1\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhich SPI Option Should You Choose?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eCheetah SPI Host Adapter\u003c\/th\u003e\n\u003cth\u003ePromira SPI Active Level 1\u003c\/th\u003e\n\u003cth\u003ePromira SPI Active Level 2\u003c\/th\u003e\n\u003cth\u003ePromira SPI Active Level 3\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI master\u003c\/th\u003e\n\u003ctd\u003e40+ MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 12.5 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 40 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 80 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI slave\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eUp to 8 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 20 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 20 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI\/O modes\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003ctd\u003eSingle and dual\u003c\/td\u003e\n\u003ctd\u003eSingle, dual and quad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave selects\u003c\/th\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eUp to 3\u003c\/td\u003e\n\u003ctd\u003eUp to 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfigurable GPIO\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eUp to 6 (2 while using SPI)\u003c\/td\u003e\n\u003ctd\u003eUp to 12\u003c\/td\u003e\n\u003ctd\u003eUp to 16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrerequisite\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003ePromira platform\u003c\/td\u003e\n\u003ctd\u003eLevel 1\u003c\/td\u003e\n\u003ctd\u003eLevel 1 and Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"total-phase-tp280121-cheetah-spi-adapter-uk\"\u003e£475\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"tp600510-spi-active-level-1-application-total-phase-uk\"\u003e£120\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"tp600610-spi-active-level-2-application-total-phase-uk\"\u003e£245\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"tp600710-spi-active-level-3-application-total-phase-uk\"\u003e£810\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eFor a master-only SPI programmer at 40 MHz or more, the Cheetah costs less than a Promira with Level 2. Choose the Promira with Level 1 when you need slave emulation, Ethernet control, or a platform that can grow into faster SPI, I2C and analysis.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eProgramming Winbond W25Q and Macronix MX25L serial flash on assembled boards. Emulating an SPI ADC so the host firmware's DMA path can be tested with known samples. Scripted SPI register tests in Python, run over Gigabit Ethernet from a test rack.\u003c\/p\u003e\n\u003cp\u003eLevel 1 suits firmware engineers bringing up SPI drivers and production engineers programming SPI memory at up to 12.5 MHz.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Promira SPI Active Level 1 Application from \u003cspan data-ds-price=\"tp600510-spi-active-level-1-application-total-phase-uk\"\u003e£120\u003c\/span\u003e ex VAT. For a formal quotation, \u003ca href=\"\/es\/pages\/contact-us\"\u003erequest a quote from our team\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 5 October 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (8 Total Phase pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-active1\/\"\u003eSPI Active Level 1 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-active2\/\"\u003eSPI Active Level 2 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-active3\/\"\u003eSPI Active Level 3 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/flash-center\/\"\u003eFlash Center\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-serial\/\"\u003ePromira Serial Platform\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-software-api-i2cspi\/\"\u003ePromira Software API\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/control-center-serial\/\"\u003eControl Center Serial\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/support\/articles\/204227283-promira-serial-platform-system-user-manual\/\"\u003ePromira Serial Platform System User Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768388444349,"sku":"TP600510","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-software-spi-active-level-1-application-28943070003389.jpg?v=1685081095"},{"product_id":"tp600610-spi-active-level-2-application-total-phase-uk","title":"Total Phase PROMIRA SPI Active - Level 2 Application","description":"\u003cp\u003eThe Promira SPI Active Level 2 Application (TP600610) raises a Total Phase Promira Serial Platform to SPI master speeds of up to 40 MHz and slave speeds of up to 20 MHz, with single and dual I\/O. It adds up to three slave selects, twelve configurable GPIO and asynchronous slave transmit and receive. It is the licence for faster SPI flash programming and multi-device SPI buses, and it installs on top of SPI Active Level 1.\u003c\/p\u003e\n\n\u003ch2\u003eSPI Master to 40 MHz With Dual I\/O\u003c\/h2\u003e\n\u003cp\u003eLevel 2 makes the Promira a dual SPI host adapter. At 40 MHz the master runs more than three times faster than Level 1, and dual I\/O doubles the data moved per clock on parts that support it. On large serial flash that turns a long read or program cycle into a short one, which matters on a production line and in a CI flow that reflashes boards on every build.\u003c\/p\u003e\n\n\u003ch2\u003eThree Slave Selects and Twelve GPIO\u003c\/h2\u003e\n\u003cp\u003eUp to three slave selects, configurable and shared with GPIO, address a flash, a sensor and a display controller on one bus without rewiring the fixture. Up to twelve GPIO handle resets, interrupts and write-protect lines, so one Promira and one script control the whole target.\u003c\/p\u003e\n\n\u003ch2\u003eSPI Slave to 20 MHz With Asynchronous Transmit and Receive\u003c\/h2\u003e\n\u003cp\u003eSlave mode runs at up to 20 MHz, and transmit and receive run asynchronously, so the Promira can emulate a peripheral that streams data to the host while it is still receiving commands. That is useful when the host MCU's SPI peripheral and DMA need testing at a realistic clock rate before the real device is fitted.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and API\u003c\/h2\u003e\n\u003cp\u003eControl Center Serial gives interactive control of the bus and GPIO. Flash Center programs and verifies I2C and SPI memory devices (Windows and Linux). The free Promira Software API covers C, C#, Python, .NET, VB.NET and VB6, with a LabVIEW driver for test stations, and the Promira Aardvark Wrapper API runs code written for the Aardvark API while you port it. Promira software runs on Windows 10 and 11, Linux and macOS 13 or later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eSPI master and slave (Active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI master speed\u003c\/th\u003e\n\u003ctd\u003e31 kHz to 40 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI slave speed\u003c\/th\u003e\n\u003ctd\u003e31 kHz to 20 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI\/O modes\u003c\/th\u003e\n\u003ctd\u003eSingle and dual I\/O (Dual SPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave selects\u003c\/th\u003e\n\u003ctd\u003eUp to 3, configurable, shared with GPIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave operation\u003c\/th\u003e\n\u003ctd\u003eAsynchronous slave transmit and receive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfigurable GPIO\u003c\/th\u003e\n\u003ctd\u003eUp to 12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrerequisite\u003c\/th\u003e\n\u003ctd\u003eSPI Active Level 1 Application (TP600510)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost platform\u003c\/th\u003e\n\u003ctd\u003ePromira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eTP600610\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a software licence only. It runs on the \u003ca href=\"\/es\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform\u003c\/a\u003e (\u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk\"\u003e£1,040\u003c\/span\u003e ex VAT), which is sold separately and must be in place before the licence can be installed.\u003c\/li\u003e\n\u003cli\u003eLevel 2 requires SPI Active Level 1 (\u003cspan data-ds-price=\"tp600510-spi-active-level-1-application-total-phase-uk\"\u003e£120\u003c\/span\u003e ex VAT) on the same Promira.\u003c\/li\u003e\n\u003cli\u003eNo quad I\/O. For quad SPI flash at full width, and SPI master to 80 MHz, choose \u003ca href=\"\/es\/products\/tp600710-spi-active-level-3-application-total-phase-uk\"\u003eSPI Active Level 3\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhich SPI Option Should You Choose?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eCheetah SPI Host Adapter\u003c\/th\u003e\n\u003cth\u003ePromira SPI Active Level 1\u003c\/th\u003e\n\u003cth\u003ePromira SPI Active Level 2\u003c\/th\u003e\n\u003cth\u003ePromira SPI Active Level 3\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI master\u003c\/th\u003e\n\u003ctd\u003e40+ MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 12.5 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 40 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 80 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI slave\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eUp to 8 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 20 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 20 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI\/O modes\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003ctd\u003eSingle and dual\u003c\/td\u003e\n\u003ctd\u003eSingle, dual and quad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave selects\u003c\/th\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eUp to 3\u003c\/td\u003e\n\u003ctd\u003eUp to 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfigurable GPIO\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eUp to 6 (2 while using SPI)\u003c\/td\u003e\n\u003ctd\u003eUp to 12\u003c\/td\u003e\n\u003ctd\u003eUp to 16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrerequisite\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003ePromira platform\u003c\/td\u003e\n\u003ctd\u003eLevel 1\u003c\/td\u003e\n\u003ctd\u003eLevel 1 and Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"total-phase-tp280121-cheetah-spi-adapter-uk\"\u003e£475\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"tp600510-spi-active-level-1-application-total-phase-uk\"\u003e£120\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"tp600610-spi-active-level-2-application-total-phase-uk\"\u003e£245\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"tp600710-spi-active-level-3-application-total-phase-uk\"\u003e£810\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eAs a dual SPI host adapter, Level 2 is the right stop for most SPI flash work up to 40 MHz with one to three devices. If you only need a master and never emulate a slave, compare it with the Cheetah.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eDual-I\/O reads and programming of 128 Mbit and larger SPI NOR flash at 40 MHz. A fixture with three SPI devices, each on its own slave select, tested from one Python script. Emulating an SPI sensor at 20 MHz while the host's DMA path is debugged.\u003c\/p\u003e\n\u003cp\u003eLevel 2 suits production engineers programming SPI flash at volume and test engineers building multi-device SPI fixtures.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Promira SPI Active Level 2 Application from \u003cspan data-ds-price=\"tp600610-spi-active-level-2-application-total-phase-uk\"\u003e£245\u003c\/span\u003e ex VAT. For a formal quotation covering the platform and SPI licences, \u003ca href=\"\/es\/pages\/contact-us\"\u003erequest a quote from our team\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 5 October 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (8 Total Phase pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-active1\/\"\u003eSPI Active Level 1 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-active2\/\"\u003eSPI Active Level 2 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-active3\/\"\u003eSPI Active Level 3 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/flash-center\/\"\u003eFlash Center\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-serial\/\"\u003ePromira Serial Platform\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-software-api-i2cspi\/\"\u003ePromira Software API\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/control-center-serial\/\"\u003eControl Center Serial\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/support\/articles\/204227283-promira-serial-platform-system-user-manual\/\"\u003ePromira Serial Platform System User Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768388477117,"sku":"TP600610","price":245.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-software-spi-active-level-2-application-28943077048509.jpg?v=1685059316"},{"product_id":"tp600710-spi-active-level-3-application-total-phase-uk","title":"Total Phase PROMIRA SPI Active - Level 3 Application","description":"\u003cp\u003eThe Promira SPI Active Level 3 Application (TP600710) is the fastest SPI licence for the Total Phase Promira Serial Platform: SPI master to 80 MHz, slave to 20 MHz, with single, dual and quad I\/O. It supports up to eight slave selects and sixteen configurable GPIO, with asynchronous slave transmit and receive. It is built for high-throughput quad SPI flash programming and dense multi-device fixtures, and installs on top of SPI Active Levels 1 and 2.\u003c\/p\u003e\n\n\u003ch2\u003eQuad SPI Master to 80 MHz\u003c\/h2\u003e\n\u003cp\u003eLevel 3 makes the Promira a quad SPI host adapter: it doubles the Level 2 master clock and adds quad I\/O, so four data lines move data on every clock. For quad-capable NOR flash that is the difference between programming at the device's real throughput and running it in single-bit mode. It also lets you validate a quad SPI design at its rated clock before the target MCU's own driver is ready.\u003c\/p\u003e\n\n\u003ch2\u003eEight Slave Selects and Sixteen GPIO\u003c\/h2\u003e\n\u003cp\u003eUp to eight slave selects, configurable and shared with up to sixteen GPIO, let one Promira address every SPI device on a dense board and drive the control lines around them. A single adapter and script can run a full board-level SPI test, rather than one tool per device.\u003c\/p\u003e\n\n\u003ch2\u003eSPI Slave to 20 MHz\u003c\/h2\u003e\n\u003cp\u003eSlave mode runs at up to 20 MHz with asynchronous transmit and receive, matching Level 2. Use it to emulate a peripheral for host firmware testing while the master side handles programming and register access on the same unit.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and API\u003c\/h2\u003e\n\u003cp\u003eControl Center Serial gives interactive control of the bus and GPIO. Flash Center programs and verifies I2C and SPI memory devices (Windows and Linux). The free Promira Software API covers C, C#, Python, .NET, VB.NET and VB6, with a LabVIEW driver for test stations, and the Promira Aardvark Wrapper API runs code written for the Aardvark API while you port it. Promira software runs on Windows 10 and 11, Linux and macOS 13 or later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eSPI master and slave (Active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI master speed\u003c\/th\u003e\n\u003ctd\u003eUp to 80 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI slave speed\u003c\/th\u003e\n\u003ctd\u003eUp to 20 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI\/O modes\u003c\/th\u003e\n\u003ctd\u003eSingle, dual and quad I\/O (Quad SPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave selects\u003c\/th\u003e\n\u003ctd\u003eUp to 8, configurable, shared with GPIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave operation\u003c\/th\u003e\n\u003ctd\u003eAsynchronous slave transmit and receive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfigurable GPIO\u003c\/th\u003e\n\u003ctd\u003eUp to 16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrerequisite\u003c\/th\u003e\n\u003ctd\u003eSPI Active Level 1 (TP600510) and Level 2 (TP600610)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost platform\u003c\/th\u003e\n\u003ctd\u003ePromira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eTP600710\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a software licence only. It runs on the \u003ca href=\"\/es\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform\u003c\/a\u003e (\u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk\"\u003e£1,040\u003c\/span\u003e ex VAT), which is sold separately and must be in place before the licence can be installed.\u003c\/li\u003e\n\u003cli\u003eLevel 3 requires SPI Active Level 1 and Level 2 on the same Promira. From a bare platform the three SPI licences total \u003cspan data-ds-price=\"tp600510-spi-active-level-1-application-total-phase-uk+tp600610-spi-active-level-2-application-total-phase-uk+tp600710-spi-active-level-3-application-total-phase-uk\"\u003e£1,175\u003c\/span\u003e ex VAT, plus the platform.\u003c\/li\u003e\n\u003cli\u003eSlave mode tops out at 20 MHz, the same as Level 2. The 80 MHz figure applies to master mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhich SPI Option Should You Choose?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eCheetah SPI Host Adapter\u003c\/th\u003e\n\u003cth\u003ePromira SPI Active Level 1\u003c\/th\u003e\n\u003cth\u003ePromira SPI Active Level 2\u003c\/th\u003e\n\u003cth\u003ePromira SPI Active Level 3\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI master\u003c\/th\u003e\n\u003ctd\u003e40+ MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 12.5 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 40 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 80 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSPI slave\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eUp to 8 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 20 MHz\u003c\/td\u003e\n\u003ctd\u003eUp to 20 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI\/O modes\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003ctd\u003eSingle and dual\u003c\/td\u003e\n\u003ctd\u003eSingle, dual and quad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlave selects\u003c\/th\u003e\n\u003ctd\u003eSee product page\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eUp to 3\u003c\/td\u003e\n\u003ctd\u003eUp to 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfigurable GPIO\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eUp to 6 (2 while using SPI)\u003c\/td\u003e\n\u003ctd\u003eUp to 12\u003c\/td\u003e\n\u003ctd\u003eUp to 16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrerequisite\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003ePromira platform\u003c\/td\u003e\n\u003ctd\u003eLevel 1\u003c\/td\u003e\n\u003ctd\u003eLevel 1 and Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"total-phase-tp280121-cheetah-spi-adapter-uk\"\u003e£475\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"tp600510-spi-active-level-1-application-total-phase-uk\"\u003e£120\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"tp600610-spi-active-level-2-application-total-phase-uk\"\u003e£245\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"tp600710-spi-active-level-3-application-total-phase-uk\"\u003e£810\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eBuy Level 3 when you need a quad SPI host adapter, a master clock above 40 MHz, or more than three slave selects. Below that, Level 2 covers the job for less.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eQuad-I\/O programming of large SPI NOR flash at 80 MHz in production. Board-level test of up to eight SPI devices from one adapter. Validating a quad SPI flash layout at its rated clock during hardware bring-up.\u003c\/p\u003e\n\u003cp\u003eLevel 3 suits production engineers with high-volume quad SPI programming and hardware validation teams working on dense SPI designs.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Promira SPI Active Level 3 Application from \u003cspan data-ds-price=\"tp600710-spi-active-level-3-application-total-phase-uk\"\u003e£810\u003c\/span\u003e ex VAT. For a formal quotation covering the platform and all three SPI licences, \u003ca href=\"\/es\/pages\/contact-us\"\u003erequest a quote from our team\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 5 October 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (8 Total Phase pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-active1\/\"\u003eSPI Active Level 1 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-active2\/\"\u003eSPI Active Level 2 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/spi-active3\/\"\u003eSPI Active Level 3 Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/flash-center\/\"\u003eFlash Center\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-serial\/\"\u003ePromira Serial Platform\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-software-api-i2cspi\/\"\u003ePromira Software API\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/control-center-serial\/\"\u003eControl Center Serial\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/support\/articles\/204227283-promira-serial-platform-system-user-manual\/\"\u003ePromira Serial Platform System User Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768388509885,"sku":"TP600710","price":810.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-software-spi-active-level-3-application-28943085600957.jpg?v=1685059323"},{"product_id":"total-phase-tp510410-34-pin-split-cable-uk","title":"Total Phase TP510410 34-pin Split Cable","description":"\u003cp\u003e34-pin Split Cable.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768388706493,"sku":"TP510410","price":90.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp510410-total-phase-34-pin-split-cable-tp510410-72356304388471.png?v=1732758048"},{"product_id":"total-phase-tp510510-34-pin-split-cable-with-grabbers","title":"Total Phase TP510510 34-pin Split Cable with Grabbers","description":"\u003cp\u003e34-pin Split Cable with Grabbers.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768389066941,"sku":"TP510510","price":135.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp510410-total-phase-34-pin-split-cable-tp510410-72356304388471.png?v=1732758048"},{"product_id":"total-phase-promira-ethernet-kit","title":"Total Phase PROMIRA Ethernet Kit","description":"\u003cp\u003ePROMIRA™ Ethernet Kit.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768390115517,"sku":"TP512110","price":70.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp512110-total-phase-promira-ethernet-kit-tp512110-72356924785015.png?v=1732757871"},{"product_id":"total-phase-tp512510-promira-mounting-plate","title":"Total Phase TP512510 PROMIRA Mounting Plate","description":"\u003cp\u003eThe PROMIRA™ Mounting Plate provides a convenient way to secure and stabilise the PROMIRA™ Serial Platform (sold separately) to any work surface.\u003c\/p\u003e\n\n\u003cp\u003eAttach the mounting plate to your work surface or other support using four screws (not included) then use the included adhesive pad to securely attach the PROMIRA™ platform to the mounting plate.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768390705341,"sku":"TP512510","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp512510-total-phase-promira-mounting-plate-tp512510-72356918722935.png?v=1732758051"},{"product_id":"displayport-to-displayport-advanced-cable-tester-module-uk","title":"DisplayPort to DisplayPort - Advanced Cable Tester Module","description":"\u003ch3\u003eQuality\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eREACH, RoHS, China RoHS\u003c\/li\u003e\n    \u003cli\u003eManufacturing: ISO 9001, ISO 13485, AS9100C, ITAR\u003c\/li\u003e\n    \u003cli\u003eWarranty for 90 days or 1000 insertions, whichever comes first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEach module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only\u003c\/li\u003e\n    \u003cli\u003eDisplayPort module has 2 DisplayPort receptacles for DUT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eW x D x H: 19.4 mm. x 3.8mm. x 3.5 mm excluding attachment pins\u003cbr\u003e\n    (7 5\/8 in. x 1 1\/2 in. x 1 3\/8 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e90 g (2.5 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperating Temperature\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e10º–35º C (50º–95º F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":40907239850173,"sku":"TP821110","price":435.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/the-debug-store-cable-tester-accessory-displayport-to-displayport-advanced-cable-tester-module-30716733391037.jpg?v=1685114223"},{"product_id":"usb-type-c-to-usb-type-c-advanced-cable-tester-module-uk","title":"USB Type-C to USB Type-C - Advanced Cable Tester Module","description":"\u003ch3\u003eQuality\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eREACH, RoHS, China RoHS\u003c\/li\u003e\n    \u003cli\u003eManufacturing: ISO 9001, ISO 13485, AS9100C, ITAR\u003c\/li\u003e\n    \u003cli\u003eWarranty for 90 days or 1000 insertions, whichever comes first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEach module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only\u003c\/li\u003e\n    \u003cli\u003eDisplayPort module has 2 DisplayPort receptacles for DUT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eW x D x H: 19.4 mm. x 3.8mm. x 3.5 mm excluding attachment pins\u003cbr\u003e\n    (7 5\/8 in. x 1 1\/2 in. x 1 3\/8 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e90 g (2.5 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperating Temperature\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e10º–35º C (50º–95º F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":40907411456189,"sku":"TP820110","price":435.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/the-debug-store-cable-tester-accessory-usb-type-c-to-usb-type-c-advanced-cable-tester-module-30716337488061.jpg?v=1685114934"},{"product_id":"usb-type-c-to-usb-3-1-standard-b-advanced-cable-tester-module-uk","title":"USB Type-C to USB 3.1 Standard-B - Advanced Cable Tester Module","description":"\u003ch3\u003eQuality\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eREACH, RoHS, China RoHS\u003c\/li\u003e\n    \u003cli\u003eManufacturing: ISO 9001, ISO 13485, AS9100C, ITAR\u003c\/li\u003e\n    \u003cli\u003eWarranty for 90 days or 1000 insertions, whichever comes first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEach module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only\u003c\/li\u003e\n    \u003cli\u003eDisplayPort module has 2 DisplayPort receptacles for DUT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eW x D x H: 19.4 mm. x 3.8mm. x 3.5 mm excluding attachment pins\u003cbr\u003e\n    (7 5\/8 in. x 1 1\/2 in. x 1 3\/8 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e90 g (2.5 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperating Temperature\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e10º–35º C (50º–95º F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":40907430461629,"sku":"TP820610","price":435.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/the-debug-store-cable-tester-accessory-usb-type-c-to-usb-3-1-standard-b-advanced-cable-tester-module-30716314943677.jpg?v=1685114929"},{"product_id":"usb-type-c-to-usb-3-1-standard-a-advanced-cable-tester-module-uk","title":"USB Type-C to USB 3.1 Standard-A - Advanced Cable Tester Module","description":"\u003ch3\u003eQuality\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eREACH, RoHS, China RoHS\u003c\/li\u003e\n    \u003cli\u003eManufacturing: ISO 9001, ISO 13485, AS9100C, ITAR\u003c\/li\u003e\n    \u003cli\u003eWarranty for 90 days or 1000 insertions, whichever comes first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEach module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only\u003c\/li\u003e\n    \u003cli\u003eDisplayPort module has 2 DisplayPort receptacles for DUT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eW x D x H: 19.4 mm. x 3.8mm. x 3.5 mm excluding attachment pins\u003cbr\u003e\n    (7 5\/8 in. x 1 1\/2 in. x 1 3\/8 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e90 g (2.5 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperating Temperature\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e10º–35º C (50º–95º F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":40907447533757,"sku":"TP820210","price":435.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/the-debug-store-cable-tester-accessory-usb-type-c-to-usb-3-1-standard-a-advanced-cable-tester-module-30716330442941.jpg?v=1685115106"},{"product_id":"usb-type-c-to-usb-3-1-micro-b-advanced-cable-tester-module-uk","title":"USB Type-C to USB 3.1 Micro-B - Advanced Cable Tester Module","description":"\u003ch3\u003eQuality\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eREACH, RoHS, China RoHS\u003c\/li\u003e\n    \u003cli\u003eManufacturing: ISO 9001, ISO 13485, AS9100C, ITAR\u003c\/li\u003e\n    \u003cli\u003eWarranty for 90 days or 1000 insertions, whichever comes first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEach module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only\u003c\/li\u003e\n    \u003cli\u003eDisplayPort module has 2 DisplayPort receptacles for DUT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eW x D x H: 19.4 mm. x 3.8mm. x 3.5 mm excluding attachment pins\u003cbr\u003e\n    (7 5\/8 in. x 1 1\/2 in. x 1 3\/8 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e90 g (2.5 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperating Temperature\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e10º–35º C (50º–95º F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":40907597906109,"sku":"TP820310","price":435.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/the-debug-store-cable-tester-accessory-usb-type-c-to-usb-3-1-micro-b-advanced-cable-tester-module-30716365635773.jpg?v=1685114926"},{"product_id":"usb-3-1-standard-a-to-usb-3-1-standard-b-advanced-cable-tester-module-uk","title":"USB 3.1 Standard-A to USB 3.1 Standard-B - Advanced Cable Tester Module","description":"\u003ch3\u003eQuality\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eREACH, RoHS, China RoHS\u003c\/li\u003e\n    \u003cli\u003eManufacturing: ISO 9001, ISO 13485, AS9100C, ITAR\u003c\/li\u003e\n    \u003cli\u003eWarranty for 90 days or 1000 insertions, whichever comes first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEach module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only\u003c\/li\u003e\n    \u003cli\u003eDisplayPort module has 2 DisplayPort receptacles for DUT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eW x D x H: 19.4 mm. x 3.8mm. x 3.5 mm excluding attachment pins\u003cbr\u003e\n    (7 5\/8 in. x 1 1\/2 in. x 1 3\/8 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e90 g (2.5 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperating Temperature\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e10º–35º C (50º–95º F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":40907610718397,"sku":"TP820510","price":435.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/the-debug-store-cable-tester-accessory-usb-3-1-standard-a-to-usb-3-1-standard-b-advanced-cable-tester-module-30716677652669.jpg?v=1685114392"},{"product_id":"usb-3-1-standard-a-to-usb-3-1-micro-b-advanced-cable-tester-module-uk","title":"USB 3.1 Standard-A to USB 3.1 Micro-B - Advanced Cable Tester Module","description":"\u003ch3\u003eQuality\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eREACH, RoHS, China RoHS\u003c\/li\u003e\n    \u003cli\u003eManufacturing: ISO 9001, ISO 13485, AS9100C, ITAR\u003c\/li\u003e\n    \u003cli\u003eWarranty for 90 days or 1000 insertions, whichever comes first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEach module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only\u003c\/li\u003e\n    \u003cli\u003eDisplayPort module has 2 DisplayPort receptacles for DUT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eW x D x H: 19.4 mm. x 3.8mm. x 3.5 mm excluding attachment pins\u003cbr\u003e\n    (7 5\/8 in. x 1 1\/2 in. x 1 3\/8 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e90 g (2.5 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperating Temperature\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e10º–35º C (50º–95º F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":40907632312509,"sku":"TP820410","price":435.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/the-debug-store-cable-tester-accessory-usb-3-1-standard-a-to-usb-3-1-micro-b-advanced-cable-tester-module-30722297135293.jpg?v=1685093882"},{"product_id":"usb-type-c-to-mfi-lightning-usb2-advanced-cable-tester-module-uk","title":"USB Type-C to MFI Lightning USB2 - Advanced Cable Tester Module","description":"\u003ch3\u003eQuality\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eREACH, RoHS, China RoHS\u003c\/li\u003e\n    \u003cli\u003eManufacturing: ISO 9001, ISO 13485, AS9100C, ITAR\u003c\/li\u003e\n    \u003cli\u003eWarranty for 90 days or 1000 insertions, whichever comes first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEach module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only\u003c\/li\u003e\n    \u003cli\u003eDisplayPort module has 2 DisplayPort receptacles for DUT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eW x D x H: 19.4 mm. x 3.8mm. x 3.5 mm excluding attachment pins\u003cbr\u003e\n    (7 5\/8 in. x 1 1\/2 in. x 1 3\/8 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e90 g (2.5 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperating Temperature\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e10º–35º C (50º–95º F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":40907690705085,"sku":"TP823110","price":435.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/the-debug-store-cable-tester-accessory-usb-type-c-to-mfi-lightning-usb2-advanced-cable-tester-module-30716511977661.jpg?v=1685114747"},{"product_id":"usb-3-1-standard-a-to-lightning-usb2-advanced-cable-tester-module-uk","title":"USB 3.1 Standard-A to Lightning USB2 - Advanced Cable Tester Module","description":"\u003ch3\u003eQuality\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eREACH, RoHS, China RoHS\u003c\/li\u003e\n    \u003cli\u003eManufacturing: ISO 9001, ISO 13485, AS9100C, ITAR\u003c\/li\u003e\n    \u003cli\u003eWarranty for 90 days or 1000 insertions, whichever comes first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEach module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only\u003c\/li\u003e\n    \u003cli\u003eDisplayPort module has 2 DisplayPort receptacles for DUT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eW x D x H: 19.4 mm. x 3.8mm. x 3.5 mm excluding attachment pins\u003cbr\u003e\n    (7 5\/8 in. x 1 1\/2 in. x 1 3\/8 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e90 g (2.5 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperating Temperature\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e10º–35º C (50º–95º F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":40909807878333,"sku":"TP823010","price":435.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/the-debug-store-cable-tester-accessory-usb-3-1-standard-a-to-lightning-usb2-advanced-cable-tester-module-30716564406461.jpg?v=1685114762"},{"product_id":"advanced-cable-tester-module-bundle-video-uk","title":"Advanced Cable Tester Module Bundle - Video","description":"","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":42135490396383,"sku":"TP825210","price":1685.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/the-debug-store-advanced-cable-tester-module-bundle-video-36237343359199.jpg?v=1685077322"},{"product_id":"to-825010-advanced-cable-tester-module-bundle-usb-c-uk","title":"Advanced Cable Tester Module Bundle - USB-C","description":"\u003cul\u003e\n    \u003cli\u003eIndividually measure the DC resistance of VBUS and GND wires\u003c\/li\u003e\n    \u003cli\u003eIndividually measure the DC resistance of VBUS and GND pins in the USB Type-C connector\u003c\/li\u003e\n    \u003cli\u003eVerify wiring is correct with no shorted or disconnected wires\u003c\/li\u003e\n    \u003cli\u003eTesting of USB 2.0 pairs is supported at about 518 Mbps, and any present SuperSpeed pairs tested at 5 Gbps or 10 Gbps.\u003c\/li\u003e\n    \u003cli\u003eThis is all you will need for testing USB Type-C cables, whether USB 2.0, USB 3.1 Gen1, USB 3.1 Gen2, or USB 3.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTest Compatibility\/Coverage\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eUSB 3.2\/3.1\/3.0\/2.0\u003c\/li\u003e\n    \u003cli\u003ePD 2.0, PD 3.0\u003c\/li\u003e\n    \u003cli\u003eShort testing - Dynamic visualization of test results\u003c\/li\u003e\n    \u003cli\u003eOpen testing - Dynamic visualization of test results\u003c\/li\u003e\n    \u003cli\u003eContinuity testing - Dynamic visualization of test results\u003c\/li\u003e\n    \u003cli\u003eDC resistance measurement for most wires, with milliohm precision on ground and power wires, ohm resolution on most other wires, continuity check only on high-speed data lines\u003c\/li\u003e\n    \u003cli\u003eSignal integrity testing of data lines to 12.8 Gbps per channel\u003c\/li\u003e\n    \u003cli\u003eE-Marker verification\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":42135515431135,"sku":"TP825010","price":1685.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-advanced-cable-tester-module-bundle-usb-c-36237371080927.jpg?v=1685077487"},{"product_id":"tp825110-advanced-cable-tester-module-bundle-apple-uk","title":"Advanced Cable Tester Module Bundle - Apple","description":"\u003cp\u003eThese  \u003cstrong\u003eAdvanced Cable Tester v2 \u003c\/strong\u003e modules enable testing of USB Type-C to Apple Lightning USB2, USB Standard-A to Apple Lightning USB2, and USB Type-C to USB Type-C cables for:\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePassing\u003c\/strong\u003e\u003c\/em\u003e USB Type-C to Lightning USB2 eye diagram\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Lightning cable passing eye diagram\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/www.totalphase.com\/media\/wysiwyg\/products\/ACTv2\/Lightning-pass_SI.png\" src=\"https:\/\/www.totalphase.com\/media\/wysiwyg\/products\/ACTv2\/Lightning-pass_SI.png\" title=\"Lightning cable passing eye diagram\" width=\"250\"\u003e  \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFailing\u003c\/strong\u003e\u003c\/em\u003e USB Type-C to Lightning USB2 eye diagram\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Lightning cable failing eye diagram\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/www.totalphase.com\/media\/wysiwyg\/products\/ACTv2\/Lightning-fail_SI.png\" src=\"https:\/\/www.totalphase.com\/media\/wysiwyg\/products\/ACTv2\/Lightning-fail_SI.png\" title=\"Lightning cable passing eye diagram\" width=\"250\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eTest Compatibility\/Coverage\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eApple MFi accessory specification R31\u003c\/li\u003e\n    \u003cli\u003eShort testing - Dynamic visualization of test results\u003c\/li\u003e\n    \u003cli\u003eOpen testing - Dynamic visualization of test results\u003c\/li\u003e\n    \u003cli\u003eContinuity testing - Dynamic visualization of test results\u003c\/li\u003e\n    \u003cli\u003eDC resistance measurement for most wires, with milliohm precision on ground and power wires, ohm resolution on most other wires\u003c\/li\u003e\n    \u003cli\u003eSignal integrity testing of data lines at ~520 Mbps\u003c\/li\u003e\n    \u003cli\u003eLightning plug bring up\/function (Apple Lightning Cables)*\u003c\/li\u003e\n    \u003cli\u003eOver-voltage protection (Apple Lightning Cables)*\u003c\/li\u003e\n    \u003cli\u003eVoltage recovery testing (Apple Lightning Cables)*\u003c\/li\u003e\n    \u003cli\u003eQuiescent current consumption (Apple Lightning Cables)*\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e* Apple MFi membership required to run these tests\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":42135539515615,"sku":"TP825110","price":1685.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-advanced-cable-tester-module-bundle-apple-36237373309151.jpg?v=1685077483"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/Lg-Total-Phase-CAN-split-cable.jpg?v=1724338197","url":"https:\/\/thedebugstore.com\/es\/collections\/total-phase-accessory-catalogue.oembed?page=3","provider":"Debug Store","version":"1.0","type":"link"}