{"title":"Reference Boards","description":"\u003cp\u003eThe Debug Store offers a range of reference boards for embedded systems development, including trace reference boards from SEGGER. These boards support various microcontrollers like STM32 and NXP series, providing easy access to trace signals and test points. They are designed for quick trace setups and can be powered through compatible debug probes, simplifying the development process.\u003c\/p\u003e","products":[{"product_id":"picotest-vrts3-distributed-system-demo-board","title":"Picotest VRTS3 Distributed System Demo Board","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003ePicotest VTS3 Demo Board\u003c\/strong\u003e\u003c\/em\u003e contains eight individual circuit sections as identified in the table below. These circuits are typical in most distributed systems providing an excellent test bed for demonstrating non-invasive, in-system measurement, optimization and troubleshooting techniques.\u003c\/p\u003e\n\n\u003ch3\u003eVRTS3 Board Sections\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"3\" cellspacing=\"0\" width=\"100%\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eSection\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePOL\u003c\/td\u003e\n            \u003ctd\u003e5V USB input to 3.3V 2.8MHz switching regulator\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eREF03\u003c\/td\u003e\n            \u003ctd\u003e2.5V low noise voltage reference\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOPAMP\u003c\/td\u003e\n            \u003ctd\u003e245MHz Bandwidth unity gain opamp buffer\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLDO\u003c\/td\u003e\n            \u003ctd\u003eLD1086 voltage regulator 5V USB input to 3.3V output\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCLOCKS\/BUFFERS\u003c\/td\u003e\n            \u003ctd\u003e10MHz and 125MHz clocks\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCALIBRATION\u003c\/td\u003e\n            \u003ctd\u003eShort-Open-Load and 1 Ohm calibration ports\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePLANES \u0026amp; CAPS\u003c\/td\u003e\n            \u003ctd\u003eParallel tantalum and ceramic capacitor on a small PCB plane\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\"\u003eMICROSTRIPS\u003c\/td\u003e\n            \u003ctd\u003e50O microstrips with precision aberrations - one with a\u003cbr\u003e\n            ground void\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e\u003cstrong\u003eSupported Measurements\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003ctable bgcolor=\"#FFFFFF\" border=\"1\" cellpadding=\"3\" cellspacing=\"0\" width=\"100%\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003e\n            \u003cp align=\"center\"\u003e\u003cstrong\u003eTEST\u003c\/strong\u003e\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e\n            \u003cp align=\"center\"\u003e\u003cstrong\u003eSIGNAL INJECTORS NEEDED\u003c\/strong\u003e\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003e1 Port Impedance\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eDC Block\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eOutput Impedance\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eSee Impedance Table 2\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eBode Plot\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eJ2100A or J2101A\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eNon-invasive Stability\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eSee Impedance Table 2\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eSwitching Frequency\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eSwitch Rise Time\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eDuty Cycle Jitter\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eNoise\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eDC Block, 1 Port Probe, Preamp\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003ePSRR\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eDC Block, J2120A, or J2111A\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eStep Load Response\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eJ2111A or J2112A\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eClock Jitter\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eClock Rise Time\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eJitter Sensitivity\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eDC Block\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003ePower Supply Impedance\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eSee Impedance Table 2\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eCrosstalk\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eClock Buffer PDN Noise\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eDC Block\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eClock Buffer Impedance\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eSee Impedance Table 2\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eParallel Capacitor resonance\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e1 Port Probe\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003ePlane Impedance\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e1 Port Probe\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eVelocity Factor and Er\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eTrace Impedance\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eImpedance of Broken Ground\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003e \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003e2 port Shunt Thru Impedance\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eJ2120A, 2 Port Probe, DC Block\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eRipple\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eDC Block, Preamp\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"199\"\u003eEMI\u003c\/td\u003e\n            \u003ctd width=\"269\"\u003eNear Field Probes\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Picotest","offers":[{"title":"Default Title","offer_id":42688505348319,"sku":"VRTS3","price":302.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/picotest-vrts3-picotest-vrts3-distributed-system-demo-board-a-versatile-platform-for-system-analysis-72199131529591.png?v=1732066307"},{"product_id":"picotest-vrts1-5-voltage-regulator-test-standard","title":"Picotest VRTS1.5 Voltage Regulator Test Standard","description":"\u003ch3\u003eSupported Measurements\u003c\/h3\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"3\" cellspacing=\"0\" width=\"100%\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eTest\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSignal Injectors or Probes Needed\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePSRR\u003c\/td\u003e\n            \u003ctd\u003eJ2120A or J2111A , J2130A or P2130A , 1-port probe\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eReverse Transfer\u003c\/td\u003e\n            \u003ctd\u003eJ2111A\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eBode Plot\u003c\/td\u003e\n            \u003ctd\u003eJ2100A or J2101A\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNon-invasive Stability\u003c\/td\u003e\n            \u003ctd\u003eJ2102A, J2130A or P2130A, 1-port probe (See Impedance Table 2 below.)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLoad Step\u003c\/td\u003e\n            \u003ctd\u003eJ2111A, J2130A or P2130A, 1-port probe\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNoise Density\u003c\/td\u003e\n            \u003ctd\u003eJ2130A or P2130A, 1-port probe\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Picotest","offers":[{"title":"Default Title","offer_id":42688509182175,"sku":"VRTS1.5","price":163.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/picotest-corp-board-picotest-vrts1-5-voltage-regulator-test-standard-37024903463135.jpg?v=1684941060"},{"product_id":"picotest-lm20143b-vrm-demo-board","title":"Picotest LM20143B Point of Load Regulator VRM Demo Boards","description":"\u003cp\u003eThe circuit is an integrated point of load synchronous buck regulator with a 5V input and a 1.2V\/2.5A output. The device uses emulated current mode control, making it simple to create a flat impedance output. Easily accessible 0805 chip size components make it easy to customize or experiment with different component values. This is a fully self-contained demo board using USB input power and an on-board resistive load.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSupported Measurements\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ctable bgcolor=\"#FFFFFF\" border=\"1\" cellpadding=\"3\" cellspacing=\"0\" width=\"555\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"190\"\u003e\n            \u003cp\u003e\u003cstrong\u003eTEST\u003c\/strong\u003e\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"347\"\u003e\n            \u003cp\u003e\u003cstrong\u003eSIGNAL INJECTORS NEEDED\u003c\/strong\u003e\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"190\"\u003e2-port output impedance\u003c\/td\u003e\n            \u003ctd width=\"347\"\u003eJ2102A two SMA cables (optional two P2130A or J2130A)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"190\"\u003eLoad Step\u003c\/td\u003e\n            \u003ctd width=\"347\"\u003eJ2111A or J2150A and J2130A or P2130A SMA cable\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"190\"\u003eRipple and Noise\u003c\/td\u003e\n            \u003ctd width=\"347\"\u003eJ2130A or P2130A SMA cable\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"190\"\u003eTurn on overshoot\u003c\/td\u003e\n            \u003ctd width=\"347\"\u003eScope with probe or SMA cable\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"190\"\u003ePSRR\u003c\/td\u003e\n            \u003ctd width=\"347\"\u003eJ2120A or J2111A and two voltage probes\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"190\"\u003eInput Impedance\u003c\/td\u003e\n            \u003ctd width=\"347\"\u003eJ2120A voltage and current probe\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd width=\"190\"\u003eBode Plot\u003c\/td\u003e\n            \u003ctd width=\"347\"\u003eJ2100A or J2101A two voltage probes\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Picotest","offers":[{"title":"Default Title","offer_id":42688509346015,"sku":"LM20143B","price":214.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/picotest-lm20143b-point-of-load-regulator-board-picotest-lm20143b-synchronous-buck-regulator-demo-72193385070967.png?v=1732066301"},{"product_id":"picotest-decoupling-test-board-kit","title":"Picotest DTBK01 Decoupling Test Board Kit","description":"\u003cp align=\"justify\"\u003eAccurate component models are essential to getting useful simulation results. Vendors often leave out the measurement details and so the results might not be what you expect.\u003c\/p\u003e\n\n\u003cp align=\"justify\"\u003eThese calibrated boards can be used to measure your own components, such as resistors, inductors and capacitors in order to obtain high quality, accurate data for your simulations. The component mounts include high quality standard SMA connectors and support 1 port and 2 port impedance measurements.\u003c\/p\u003e\n\n\u003cp align=\"justify\"\u003eThe boards come unpopulated, ready for your components to be mounted. The kit includes a variety of test board sizes as noted below, supporting commonly used component package sizes. De-embed files are included are available in three formats, s1p, s2p and CTI. The boards can also be de-embedded using full fixture compensation or impedance calibration available in many popular VNA's.\u003c\/p\u003e\n\n\u003cp align=\"justify\"\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\nOne each of seventeen (17) test boards in the following sizes: 0201, 0204, 0402, 0402-TEE, 0402-XZY, 0603, 0603-TEE, 0612, 0805, 1206, 1210, 2512, 7343, 49470, 5mm, 8mm, SOL-Calibrator\u003cbr\u003e\nPlastic Storage Box\u003c\/p\u003e","brand":"Picotest","offers":[{"title":"Default Title","offer_id":42691907125471,"sku":"DTBK01","price":247.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/picotest-corp-board-picotest-decoupling-test-board-kit-37015205314783.jpg?v=1684957983"},{"product_id":"segger-6-68-18-cortex-m-trace-reference-board","title":"SEGGER Cortex-M Trace Reference Board","description":"\u003cp\u003eThe SEGGER Cortex-M Trace Reference Board (part number 6.68.18) is an ETM trace target built on the ST STM32F407VE, an ARM Cortex-M4F microcontroller with a maximum CPU clock of 168 MHz and 4-bit trace giving a maximum trace bandwidth of 672 Mbps. It is designed for SEGGER J-Trace PRO, which powers the board through the trace header, and SEGGER's example projects run out of the box in Ozone. Use it to prove a streaming trace, live code coverage and profiling setup before moving to your own hardware, or as a reference for trace signal layout on a custom board.\u003c\/p\u003e\n\n\u003ch2\u003eA Known-Good Cortex-M4F Trace Target for J-Trace PRO\u003c\/h2\u003e\n\u003cp\u003eSEGGER states the prime purpose of the board as quickly setting up a reference project for instruction tracing, live code coverage and profiling. All trace signals on the board are optimised for signal quality, so when trace works here and fails on your own target, the problem is in the target. The small footprint makes it easy to carry to a customer or a training session. SEGGER also lists this board in the package content of J-Trace PRO Cortex and J-Trace PRO Cortex-M, so buying it separately gives a second reference target for another bench.\u003c\/p\u003e\n\n\u003ch2\u003eTrace Header, Test Points and Target Power\u003c\/h2\u003e\n\u003cp\u003eThe external debug header carries the trace pins. SEGGER's 19-pin JTAG\/SWD and trace connector assigns VTref, SWDIO\/TMS, SWCLK\/TCK, SWO\/TDO, TDI, nRESET, TRACECLK and TRACEDATA[0] to [3]; pins 3, 5, 15, 17 and 19 are GND and pin 9 is left open. J-Trace PRO can supply 5V to the target on pins 11 and 13, so the board needs no separate power cable: run power on perm in J-Link Commander, then connect the board, and the green Target power LED on the probe lights. All trace signals are also brought out as test points for oscilloscope measurements, and three LEDs are free for use in trace demo applications.\u003c\/p\u003e\n\n\u003ch2\u003eExample Projects and Software\u003c\/h2\u003e\n\u003cp\u003eSEGGER's Knowledge Base article for this board provides a J-Trace PRO streaming trace tutorial project with a preconfigured Ozone project file, and a bare-bone trace example for the STM32F407 with a J-Link script sample. Both are prebuilt, so they run in Ozone without rebuilding; SEGGER Embedded Studio is used if you want to rebuild them. SEGGER lists J-Link software V6.94a or later, Ozone V3.22a or later and J-Trace PRO for Cortex-M hardware V1.0 or later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e6.68.18\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003ctd\u003eST STM32F407VE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCore\u003c\/th\u003e\n\u003ctd\u003eARM Cortex-M4F\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. CPU clock\u003c\/th\u003e\n\u003ctd\u003e168 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eEmbedded Trace Macrocell (ETM), 4-bit trace port\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. trace bandwidth\u003c\/th\u003e\n\u003ctd\u003e672 Mbps (4-bit trace)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace port clock\u003c\/th\u003e\n\u003ctd\u003e168 MHz (actual trace clock is half the TPIU frequency, sampled on both edges)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug connector\u003c\/th\u003e\n\u003ctd\u003eExternal debug header with trace pins (19-pin JTAG\/SWD and trace)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget power\u003c\/th\u003e\n\u003ctd\u003e5V from J-Trace PRO on pins 11 and 13\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTest points\u003c\/th\u003e\n\u003ctd\u003eAll trace signals\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLEDs\u003c\/th\u003e\n\u003ctd\u003e3, for demo applications\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eJ-Link software V6.94a or later; Ozone V3.22a or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for the board sold on its own, so the order is for the Cortex-M Trace Reference Board itself. The example projects are free downloads from SEGGER's Knowledge Base.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo trace probe is included. SEGGER designed the board for J-Trace PRO, which captures the trace and powers the board.\u003c\/li\u003e\n  \u003cli\u003eSEGGER says the board can be used with other ARM emulators that share the same pinout, but at your own risk.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no dimensions or weight for the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTrace Reference Boards Compared\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003cth\u003eMax. CPU clock\u003c\/th\u003e\n\u003cth\u003eMax. trace bandwidth (4-bit)\u003c\/th\u003e\n\u003cth\u003eDebug interfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCortex-M Trace Reference Board (this product)\u003c\/td\u003e\n\u003ctd\u003eST STM32F407, Cortex-M4F\u003c\/td\u003e\n\u003ctd\u003e168 MHz\u003c\/td\u003e\n\u003ctd\u003e672 Mbps\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-68-18-cortex-m-trace-reference-board\"\u003e£19\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-stm32h7-6-68-20-trace-reference-board\"\u003eSTM32H7 Trace Reference Board\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eST STM32H743, Cortex-M7\u003c\/td\u003e\n\u003ctd\u003e400 MHz\u003c\/td\u003e\n\u003ctd\u003e1064 Mbps\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-stm32h7-6-68-20-trace-reference-board\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-6-68-19-nxp-imx-rt1050-trace-reference-board\"\u003eiMX RT1050 Trace Reference Board\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eNXP iMX RT1051\/52, Cortex-M7\u003c\/td\u003e\n\u003ctd\u003e600 MHz\u003c\/td\u003e\n\u003ctd\u003e1056 Mbps\u003c\/td\u003e\n\u003ctd\u003eSWD\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-68-19-nxp-imx-rt1050-trace-reference-board\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-j-trace-pro-cortex-m-8-18-00\"\u003eJ-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003eStreaming trace probe that powers and traces these boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eChecking that a new J-Trace PRO and Ozone installation streams trace before connecting a custom Cortex-M target. Demonstrating live code coverage and profiling on an STM32F407 in a customer meeting or a training session. Measuring TRACECLK and TRACEDATA edges at the test points as a reference when a trace header on your own board gives errors.\u003c\/p\u003e\n\u003cp\u003eThe board suits firmware engineers setting up streaming trace for the first time and hardware engineers laying out a trace connector.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Cortex-M Trace Reference Board for \u003cspan data-ds-price=\"segger-6-68-18-cortex-m-trace-reference-board\"\u003e£19\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/es\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/trace-reference-boards\/overview\/\"\u003eSEGGER Trace Reference Boards overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Tracing_on_ST_STM32F407_(SEGGER_Cortex-M_Trace_Reference_Board)\"\u003eSEGGER Knowledge Base: Tracing on ST STM32F407 (SEGGER Cortex-M Trace Reference Board)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/evaluation-boards\/trace-reference-boards\/cortex-m-trace-reference-board\"\u003eSEGGER shop: Cortex-M Trace Reference Board\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/evaluation-boards\/\"\u003eSEGGER evaluation boards price list (part numbers)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44270659993823,"sku":"6.68.18","price":19.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-6-68-18-40216194056415.jpg?v=1689594597"},{"product_id":"segger-stm32h7-6-68-20-trace-reference-board","title":"SEGGER STM32H7 Trace Reference Board","description":"\u003cp\u003eThe SEGGER STM32H7 Trace Reference Board (part number 6.68.20) is an ETM trace target built on the ST STM32H743, an ARM Cortex-M7 microcontroller with a maximum CPU clock of 400 MHz, 4-bit trace reaching a maximum trace bandwidth of 1064 Mbps and a trace port clock of 266 MHz. It supports JTAG, SWD and SWO, takes its power from SEGGER J-Trace PRO through the trace header, and has example projects on SEGGER's Knowledge Base for both streaming trace and the on-chip trace buffer. It serves firmware engineers proving a Cortex-M7 trace setup and hardware engineers who need a reference for trace signal quality on a custom board.\u003c\/p\u003e\n\n\u003ch2\u003eCortex-M7 Streaming Trace Reference for J-Trace PRO\u003c\/h2\u003e\n\u003cp\u003eSEGGER states the prime purpose of the board as quickly setting up a reference project for instruction tracing, live code coverage and profiling. All trace signals on the board are optimised for signal quality, so the board gives a known-good result to compare against when trace on your own STM32H7 design is unreliable.\u003c\/p\u003e\n\n\u003ch2\u003eTrace Header, Test Points and Target Power\u003c\/h2\u003e\n\u003cp\u003eThe external debug header carries the trace pins. SEGGER's 19-pin JTAG\/SWD and trace connector assigns VTref, SWDIO\/TMS, SWCLK\/TCK, SWO\/TDO, TDI, nRESET, TRACECLK and TRACEDATA[0] to [3]; pins 3, 5, 15, 17 and 19 are GND and pin 9 is left open. J-Trace PRO can supply 5V to the target on pins 11 and 13, so the board needs no separate power cable: run power on perm in J-Link Commander, then connect the board, and the green Target power LED on the probe lights. All trace signals are also brought out as test points for oscilloscope measurements, and three LEDs are free for use in trace demo applications.\u003c\/p\u003e\n\n\u003ch2\u003eStreaming Trace and Trace Buffer Example Projects\u003c\/h2\u003e\n\u003cp\u003eSEGGER's STM32H7 Knowledge Base article names this board as its tested hardware and provides two tutorial projects. ST_STM32H7_Trace_Tutorial_Project demonstrates streaming trace with the core at 64 MHz and the trace clock at 32 MHz. ST_STM32H7_TraceBuffer_Tutorial_Project uses the on-chip trace buffer instead and is not intended for streaming trace. Both are prebuilt and run in Ozone without rebuilding; SEGGER Embedded Studio is used to rebuild them.\u003c\/p\u003e\n\u003cp\u003eFor streaming trace SEGGER lists J-Link software V6.60d or later, Ozone V3.10b or later and J-Trace PRO for Cortex-M hardware V1.0 or later. For TMC\/ETB trace through the trace buffer, SEGGER lists J-Link PLUS V10 or later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e6.68.20\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003ctd\u003eST STM32H743\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCore\u003c\/th\u003e\n\u003ctd\u003eARM Cortex-M7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. CPU clock\u003c\/th\u003e\n\u003ctd\u003e400 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eEmbedded Trace Macrocell (ETM), 4-bit trace port\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. trace bandwidth\u003c\/th\u003e\n\u003ctd\u003e1064 Mbps (4-bit trace)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace port clock\u003c\/th\u003e\n\u003ctd\u003e266 MHz (actual trace clock is half the TPIU frequency, sampled on both edges)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug connector\u003c\/th\u003e\n\u003ctd\u003eExternal debug header with trace pins (19-pin JTAG\/SWD and trace)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget power\u003c\/th\u003e\n\u003ctd\u003e5V from J-Trace PRO on pins 11 and 13\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTest points\u003c\/th\u003e\n\u003ctd\u003eAll trace signals\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLEDs\u003c\/th\u003e\n\u003ctd\u003e3, for demo applications\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eJ-Link software V6.60d or later; Ozone V3.10b or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this board, so the order is for the STM32H7 Trace Reference Board itself. The example projects are free downloads from SEGGER's Knowledge Base.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo trace probe is included. Streaming trace needs J-Trace PRO; the trace buffer example needs a J-Link PLUS V10 or later.\u003c\/li\u003e\n  \u003cli\u003eThe streaming trace tutorial runs the core at 64 MHz with a 32 MHz trace clock, not at the board's maximum figures.\u003c\/li\u003e\n  \u003cli\u003eSEGGER says the board can be used with other ARM emulators that share the same pinout, but at your own risk.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no dimensions or weight for the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTrace Reference Boards Compared\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003cth\u003eMax. CPU clock\u003c\/th\u003e\n\u003cth\u003eMax. trace bandwidth (4-bit)\u003c\/th\u003e\n\u003cth\u003eDebug interfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSTM32H7 Trace Reference Board (this product)\u003c\/td\u003e\n\u003ctd\u003eST STM32H743, Cortex-M7\u003c\/td\u003e\n\u003ctd\u003e400 MHz\u003c\/td\u003e\n\u003ctd\u003e1064 Mbps\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-stm32h7-6-68-20-trace-reference-board\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-6-68-19-nxp-imx-rt1050-trace-reference-board\"\u003eiMX RT1050 Trace Reference Board\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eNXP iMX RT1051\/52, Cortex-M7\u003c\/td\u003e\n\u003ctd\u003e600 MHz\u003c\/td\u003e\n\u003ctd\u003e1056 Mbps\u003c\/td\u003e\n\u003ctd\u003eSWD\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-68-19-nxp-imx-rt1050-trace-reference-board\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-6-68-18-cortex-m-trace-reference-board\"\u003eCortex-M Trace Reference Board\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eST STM32F407, Cortex-M4F\u003c\/td\u003e\n\u003ctd\u003e168 MHz\u003c\/td\u003e\n\u003ctd\u003e672 Mbps\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-68-18-cortex-m-trace-reference-board\"\u003e£19\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-j-trace-pro-cortex-m-8-18-00\"\u003eJ-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003eStreaming trace probe that powers and traces these boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eBringing up streaming trace and live code coverage in Ozone on a Cortex-M7 before the first custom STM32H7 boards arrive. Comparing ETB trace buffer capture with a J-Link PLUS against streaming capture with J-Trace PRO on the same target. Probing the trace test points as a signal quality reference while reviewing a new trace connector layout.\u003c\/p\u003e\n\u003cp\u003eThe board suits STM32H7 firmware teams and hardware engineers checking trace routing.\u003c\/p\u003e\n\n\u003cp\u003eOrder the STM32H7 Trace Reference Board for \u003cspan data-ds-price=\"segger-stm32h7-6-68-20-trace-reference-board\"\u003e£240\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/es\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/trace-reference-boards\/overview\/\"\u003eSEGGER Trace Reference Boards overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Tracing_on_ST_STM32H743\"\u003eSEGGER Knowledge Base: ST STM32H7 tracing\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/evaluation-boards\/trace-reference-boards\/stm32h7-trace-reference-board\"\u003eSEGGER shop: STM32H7 Trace Reference Board\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/evaluation-boards\/\"\u003eSEGGER evaluation boards price list (part numbers)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44272074916063,"sku":"6.68.20","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-6-68-20-40221168992479.jpg?v=1689688198"},{"product_id":"segger-6-20-12-nand-flash-evaluator-board","title":"SEGGER NAND Flash Evaluator Board","description":"\u003cp\u003eThe SEGGER NAND Flash Evaluator (part number 6.20.12) is an evaluation board for SEGGER's emFile NAND driver, built around an ST STM32H743 ARM Cortex-M7 microcontroller running at up to 400 MHz, with a TSOP48 socket so parallel NAND flash can be tested without soldering. It works with virtually any parallel NAND flash in TSOP48 or VFBGA63 packages with an 8-bit or 16-bit data bus, and runs the MCU and NAND device at 3.3V or 1.8V by jumper. Use it to compare candidate NAND parts and check emFile behaviour on real flash before committing a device to your own design.\u003c\/p\u003e\n\n\u003ch2\u003eSwap NAND Flash Devices in the TSOP48 Socket\u003c\/h2\u003e\n\u003cp\u003eMost evaluation boards have the flash soldered down, which ties the evaluation to one part. Here the NAND device sits in a TSOP48 socket on an adapter board that plugs into the baseboard through three 8-pin headers, so you can test one candidate, remove it and fit the next. For VFBGA63 parts, SEGGER offers a VFBGA63 flash adapter as an add-on module and publishes its schematic. A jumper selects 3.3V or 1.8V for both the MCU and the NAND device, covering low-voltage parts as well as 3.3V flash.\u003c\/p\u003e\n\n\u003ch2\u003eemFile NAND Driver and Evaluation Software\u003c\/h2\u003e\n\u003cp\u003eThe evaluation software for SEGGER Embedded Studio exercises the emFile components SEGGER lists for this board: BASE, Encryption, FAT, FAT LFN, Journaling, Storage Layer, RAMDisk and the NAND device driver. emFile is supplied as object code with a start project. The same evaluation package also covers embOS (Core and Profiling), emUSB-Device, emNet, emSSL, emSSH, emSecure, emCrypt, emCompress, emModbus, emWeb and the IoT Toolkit, so one board can also be used to try the rest of the emPower OS stack. SEGGER's application note AN00020 covers getting started with its evaluation software, and SEGGER states that the board is recognised by all current operating systems out of the box.\u003c\/p\u003e\n\n\u003ch2\u003eBoard Interfaces, Power and Debug Access\u003c\/h2\u003e\n\u003cp\u003eThe baseboard has a micro-USB connector for power and data, high-speed USB and a 19-pin debug header. It is powered from micro-USB or through the debug connector pins, a green LED shows that power is present, and a bi-colour green and red status LED sits on a GPIO port. The baseboard has 2 MB of ROM and 383 KB of RAM. Programming and debugging the evaluator need a JTAG debug probe such as J-Link.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e6.20.12\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003ctd\u003eST STM32H743, ARM Cortex-M7, up to 400 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOn-board memory\u003c\/th\u003e\n\u003ctd\u003e2 MB ROM, 383 KB RAM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlash socket\u003c\/th\u003e\n\u003ctd\u003eTSOP48, on plug-in adapter board\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported NAND\u003c\/th\u003e\n\u003ctd\u003eParallel NAND flash in TSOP48 or VFBGA63 packages, 8-bit or 16-bit data bus\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlash adapter connection\u003c\/th\u003e\n\u003ctd\u003eThree 8-pin headers\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMCU and NAND voltage\u003c\/th\u003e\n\u003ctd\u003e3.3V or 1.8V, jumper selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eMicro-USB (power and data), high-speed USB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug connector\u003c\/th\u003e\n\u003ctd\u003e19-pin debug header\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eMicro-USB or debug connector pins\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLEDs\u003c\/th\u003e\n\u003ctd\u003eGreen power LED; bi-colour green\/red status LED on a GPIO port\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eemFile components\u003c\/th\u003e\n\u003ctd\u003eBASE, Encryption, FAT, FAT LFN, Journaling, Storage Layer, RAMDisk, NAND device driver\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEvaluation software\u003c\/th\u003e\n\u003ctd\u003eProject for SEGGER Embedded Studio; emFile as object code with start project\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNAND Flash Evaluator carrier board\u003c\/li\u003e\n  \u003cli\u003eNAND Flash Adapter TSOP-48\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo debug probe is included. Programming and debugging need a JTAG debug probe such as J-Link.\u003c\/li\u003e\n  \u003cli\u003eSEGGER's package list names no USB cable; supply your own micro-USB cable.\u003c\/li\u003e\n  \u003cli\u003eThe VFBGA63 flash adapter is an add-on module from SEGGER, not part of the package.\u003c\/li\u003e\n  \u003cli\u003eThe board evaluates parallel NAND. For SPI and QSPI NOR or NAND flash, use the (Q)SPI Flash Evaluator.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no dimensions or weight for the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSEGGER Flash Evaluators Compared\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlash type\u003c\/th\u003e\n\u003cth\u003eDevice mounting\u003c\/th\u003e\n\u003cth\u003eProgramming and debug\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNAND Flash Evaluator (this product)\u003c\/td\u003e\n\u003ctd\u003eParallel NAND, 8-bit or 16-bit bus\u003c\/td\u003e\n\u003ctd\u003eTSOP48 socket; VFBGA63 adapter as add-on\u003c\/td\u003e\n\u003ctd\u003eJ-Link, 19-pin debug header\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-20-12-nand-flash-evaluator-board\"\u003e£270\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-6-40-00-sqspi-flash-evaluator-board\"\u003e(Q)SPI Flash Evaluator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSPI and QSPI NOR and NAND\u003c\/td\u003e\n\u003ctd\u003eDevices soldered to SO, BGA or SON\/DFN adapter boards\u003c\/td\u003e\n\u003ctd\u003eJ-Link or Flasher, direct or indirect programming\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-40-00-sqspi-flash-evaluator-board\"\u003e£248\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-8-19-00-j-link-base-compact-debugger\"\u003eJ-Link BASE Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eJTAG\/SWD debug probe for programming and debugging the evaluator\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eShortlisting TSOP48 NAND parts from several vendors for a data logger, by running the emFile NAND driver on each one in turn. Checking that a 1.8V NAND device works with emFile before the board design fixes the flash supply rail. Trying emFile journaling and encryption on real NAND before licensing the file system.\u003c\/p\u003e\n\u003cp\u003eThe board suits firmware engineers choosing a NAND device and teams evaluating emFile for a product.\u003c\/p\u003e\n\n\u003cp\u003eOrder the NAND Flash Evaluator for \u003cspan data-ds-price=\"segger-6-20-12-nand-flash-evaluator-board\"\u003e£270\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/es\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (3 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/evaluate-our-software\/segger\/nand-flash-eval-board\/\"\u003eSEGGER NAND Flash Evaluator page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/evaluation-boards\/memory\/memory-evaluation-boards\/nand-flash-evaluator\"\u003eSEGGER shop: NAND Flash Evaluator\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/evaluation-boards\/\"\u003eSEGGER evaluation boards price list (part numbers)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44272074948831,"sku":"6.20.12","price":270.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-6-20-12-nand-flash-evaluator-board-segger-debug-store-uk-40288653082847.jpg?v=1691243579"},{"product_id":"segger-6-68-19-nxp-imx-rt1050-trace-reference-board","title":"SEGGER NXP iMX RT1050 Trace Reference Board","description":"\u003cp\u003eThe SEGGER iMX RT1050 Trace Reference Board (part number 6.68.19) is an ETM trace target built on the NXP iMX RT1051\/52, an ARM Cortex-M7 microcontroller with a maximum CPU clock of 600 MHz, 4-bit trace reaching a maximum trace bandwidth of 1056 Mbps and a trace port clock of 264 MHz. It connects over SWD, takes its power from SEGGER J-Trace PRO through the trace header, and comes with an example project that runs out of the box. Use it to set up streaming trace, live code coverage and profiling on the iMX RT1050 before your own hardware is ready, or as a reference for trace signal quality.\u003c\/p\u003e\n\n\u003ch2\u003eStreaming Trace on the NXP iMX RT1050 with J-Trace PRO\u003c\/h2\u003e\n\u003cp\u003eSEGGER introduced the board to demonstrate streaming trace, live code coverage and profiling on the NXP iMX RT1050, and states its prime purpose as quickly setting up a reference project for instruction tracing, live code coverage and profiling. All trace signals on the board are optimised for signal quality, so it gives a known-good result to compare against when trace on a custom iMX RT design is unreliable.\u003c\/p\u003e\n\n\u003ch2\u003eTrace Header, Test Points and Target Power\u003c\/h2\u003e\n\u003cp\u003eThe external debug header carries the trace pins. SEGGER's 19-pin JTAG\/SWD and trace connector assigns VTref, SWDIO\/TMS, SWCLK\/TCK, SWO\/TDO, TDI, nRESET, TRACECLK and TRACEDATA[0] to [3]; pins 3, 5, 15, 17 and 19 are GND and pin 9 is left open. J-Trace PRO can supply 5V to the target on pins 11 and 13, so the board needs no separate power cable: run power on perm in J-Link Commander, then connect the board, and the green Target power LED on the probe lights. All trace signals are also brought out as test points for oscilloscope measurements, and three LEDs are free for use in trace demo applications.\u003c\/p\u003e\n\n\u003ch2\u003eExample Project and Software\u003c\/h2\u003e\n\u003cp\u003eSEGGER's trace reference board overview links the example project for this board, Tracing on NXP iMX RT1050, from its Knowledge Base, and states that each board comes with an example project that runs out of the box. Check that article for the current project download and software requirements before you start; SEGGER's minimum J-Link and Ozone versions differ between its other two boards.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e6.68.19\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003ctd\u003eNXP iMX RT1051\/52 (iMX RT1050)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCore\u003c\/th\u003e\n\u003ctd\u003eARM Cortex-M7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. CPU clock\u003c\/th\u003e\n\u003ctd\u003e600 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace\u003c\/th\u003e\n\u003ctd\u003eEmbedded Trace Macrocell (ETM), 4-bit trace port\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax. trace bandwidth\u003c\/th\u003e\n\u003ctd\u003e1056 Mbps (4-bit trace)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTrace port clock\u003c\/th\u003e\n\u003ctd\u003e264 MHz (actual trace clock is half the TPIU frequency, sampled on both edges)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug interface\u003c\/th\u003e\n\u003ctd\u003eSWD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDebug connector\u003c\/th\u003e\n\u003ctd\u003eExternal debug header with trace pins (19-pin JTAG\/SWD and trace)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget power\u003c\/th\u003e\n\u003ctd\u003e5V from J-Trace PRO on pins 11 and 13\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTest points\u003c\/th\u003e\n\u003ctd\u003eAll trace signals\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLEDs\u003c\/th\u003e\n\u003ctd\u003e3, for demo applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eSEGGER publishes no box list for this board, so the order is for the iMX RT1050 Trace Reference Board itself. The example project is a free download from SEGGER's Knowledge Base.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo trace probe is included. SEGGER designed the board for J-Trace PRO, which captures the trace and powers the board.\u003c\/li\u003e\n  \u003cli\u003eSEGGER lists SWD as the debug interface for this board; JTAG and SWO are listed only for the STM32H7 and Cortex-M boards.\u003c\/li\u003e\n  \u003cli\u003eSEGGER says the board can be used with other ARM emulators that share the same pinout, but at your own risk.\u003c\/li\u003e\n  \u003cli\u003eSEGGER publishes no dimensions or weight for the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTrace Reference Boards Compared\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMicrocontroller\u003c\/th\u003e\n\u003cth\u003eMax. CPU clock\u003c\/th\u003e\n\u003cth\u003eMax. trace bandwidth (4-bit)\u003c\/th\u003e\n\u003cth\u003eDebug interfaces\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eiMX RT1050 Trace Reference Board (this product)\u003c\/td\u003e\n\u003ctd\u003eNXP iMX RT1051\/52, Cortex-M7\u003c\/td\u003e\n\u003ctd\u003e600 MHz\u003c\/td\u003e\n\u003ctd\u003e1056 Mbps\u003c\/td\u003e\n\u003ctd\u003eSWD\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-68-19-nxp-imx-rt1050-trace-reference-board\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-stm32h7-6-68-20-trace-reference-board\"\u003eSTM32H7 Trace Reference Board\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eST STM32H743, Cortex-M7\u003c\/td\u003e\n\u003ctd\u003e400 MHz\u003c\/td\u003e\n\u003ctd\u003e1064 Mbps\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-stm32h7-6-68-20-trace-reference-board\"\u003e£240\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-6-68-18-cortex-m-trace-reference-board\"\u003eCortex-M Trace Reference Board\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eST STM32F407, Cortex-M4F\u003c\/td\u003e\n\u003ctd\u003e168 MHz\u003c\/td\u003e\n\u003ctd\u003e672 Mbps\u003c\/td\u003e\n\u003ctd\u003eJTAG, SWD, SWO\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-68-18-cortex-m-trace-reference-board\"\u003e£19\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-j-trace-pro-cortex-m-8-18-00\"\u003eJ-Trace PRO Cortex-M\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003eStreaming trace probe that powers and traces these boards\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-trace-pro-cortex-m-8-18-00\"\u003e£1515\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSetting up streaming trace and live code coverage on an iMX RT1050 while custom boards are still in layout. Demonstrating instruction trace and profiling on a 600 MHz Cortex-M7 at a design review or training course. Measuring the trace clock and data lines at the test points as a reference when a trace connector on your own iMX RT board misbehaves.\u003c\/p\u003e\n\u003cp\u003eThe board suits firmware engineers working on NXP iMX RT parts and hardware engineers checking trace routing.\u003c\/p\u003e\n\n\u003cp\u003eOrder the iMX RT1050 Trace Reference Board for \u003cspan data-ds-price=\"segger-6-68-19-nxp-imx-rt1050-trace-reference-board\"\u003e£240\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/es\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-trace\/accessories\/trace-reference-boards\/overview\/\"\u003eSEGGER Trace Reference Boards overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Tracing_on_NXP_iMX_RT1050_(iMX_RT1050_Trace_Reference_Board)\"\u003eSEGGER Knowledge Base: Tracing on NXP iMX RT1050\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/evaluation-boards\/trace-reference-boards\/nxp-imx-rt1050-trace-reference-board\"\u003eSEGGER shop: iMX RT1050 Trace Reference Board\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/news\/j-trace-pro-new-trace-reference-board-imx-rt1050\/\"\u003eSEGGER news: new trace reference board for NXP iMX RT1050\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/evaluation-boards\/\"\u003eSEGGER evaluation boards price list (part numbers)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44272074981599,"sku":"6.68.19","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-6-68-19-40221166403807.jpg?v=1689688208"},{"product_id":"segger-6-40-00-sqspi-flash-evaluator-board","title":"SEGGER SQSPI Flash Evaluator Board","description":"\u003cp\u003eThe SEGGER (Q)SPI Flash Evaluator (part number 6.40.00) is an evaluation board for SPI and QSPI flash, used to test SEGGER's emFile NOR and NAND drivers and the direct and indirect programming of serial flash with J-Link debug probes and Flasher production programmers. Flash devices are soldered to plug-in adapter boards for SO-8, SO-8W, SO-16, BGA and SON\/DFN packages, which connect to the carrier through an 8x2 adapter header, and a jumper sets 1.8V or 3.3V flash operation. A QSPI adapter already populated with an ISSI flash device ships in the box, so testing can start before any soldering.\u003c\/p\u003e\n\n\u003ch2\u003eCompare Serial Flash Parts on Interchangeable Adapter Boards\u003c\/h2\u003e\n\u003cp\u003eSEGGER built the evaluator to check speed and reliability on the actual flash part. Each candidate device is soldered to the adapter board that matches its package, then plugged into the carrier through the 8x2 adapter header; swapping parts means swapping adapters, not reworking the main board. SEGGER publishes schematics for the SO and SON\/DFN adapters.\u003c\/p\u003e\n\n\u003ch2\u003eDirect SPI Flash Programming with J-Link and Flasher\u003c\/h2\u003e\n\u003cp\u003eIn direct programming the J-Link or Flasher connects straight to the flash SPI interface, with no CPU in between; in indirect programming it connects to the microcontroller, which then programs the flash. SEGGER's Knowledge Base sets out the direct programming procedure: set the SEL 1.8V jumper (closed for 1.8V flash, open for 3.3V flash), plug in the flash adapter with pin 1 aligned, power the evaluator over micro-USB until the PWR LED lights, connect the J-Link or Flasher with a 20-pin ribbon cable and start J-Flash SPI. QSPI evaluation needs board revision A or later, marked Rev. A on the back of the board.\u003c\/p\u003e\n\n\u003ch2\u003eemFile and emPower OS Evaluation Software\u003c\/h2\u003e\n\u003cp\u003eThe evaluator comes with a preconfigured emPower OS evaluation package for SEGGER Embedded Studio, licensed under the SEGGER Friendly License (SFL) for evaluation and non-commercial use with full functionality. The emFile components listed are BASE with Encryption, FAT, FAT LFN, Journaling, NAND and RAMDisk. The package also includes embOS, emUSB-Device, emNet, emSSL, emSSH, emSecure, emCrypt, emCompress, emModbus, emWeb and the IoT Toolkit.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e6.40.00\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlash types\u003c\/th\u003e\n\u003ctd\u003eSPI and QSPI flash, NOR and NAND\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter connection\u003c\/th\u003e\n\u003ctd\u003e8x2 adapter header\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAdapter packages\u003c\/th\u003e\n\u003ctd\u003eSO-8, SO-8W, SO-16; BGA 4x6mm and 5x5mm; SON\/DFN 8x6, 6x5, 4x4, 3x4, 3x2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlash voltage\u003c\/th\u003e\n\u003ctd\u003e1.8V or 3.3V, set by the SEL 1.8V jumper\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eMicro-USB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgrammer connection\u003c\/th\u003e\n\u003ctd\u003eJ-Link or Flasher via 20-pin ribbon cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProgramming modes\u003c\/th\u003e\n\u003ctd\u003eDirect (programmer to SPI interface) and indirect (programmer to microcontroller)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost software\u003c\/th\u003e\n\u003ctd\u003eJ-Link software package; J-Flash SPI for direct programming\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows, Linux, macOS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eQSPI support\u003c\/th\u003e\n\u003ctd\u003eBoard revision A or later\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eemFile components\u003c\/th\u003e\n\u003ctd\u003eBASE with Encryption, FAT, FAT LFN, Journaling, NAND, RAMDisk\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEvaluation licence\u003c\/th\u003e\n\u003ctd\u003eSEGGER Friendly License (SFL), evaluation and non-commercial use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e(Q)SPI Flash Evaluator carrier board\u003c\/li\u003e\n  \u003cli\u003eQSPI adapter populated with ISSI IS25LPO64D flash chip (as SEGGER lists it)\u003c\/li\u003e\n  \u003cli\u003e3 adapter boards for SO-8, SO-8W, SO-16 (blank PCB)\u003c\/li\u003e\n  \u003cli\u003e3 adapter boards for BGA 4x6mm and 5x5mm (blank PCB)\u003c\/li\u003e\n  \u003cli\u003e3 adapter boards for SON\/DFN 8x6, 6x5, 4x4, 3x4, 3x2 (blank PCB)\u003c\/li\u003e\n  \u003cli\u003e6 connectors\u003c\/li\u003e\n  \u003cli\u003eMicro USB cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo J-Link or Flasher is included, and SEGGER's package list names no 20-pin ribbon cable; use the cable supplied with your probe.\u003c\/li\u003e\n  \u003cli\u003eJ-Flash SPI is not included with J-Link BASE. It comes with the J-Link PLUS, or with the BASE to PLUS upgrade licence for an existing BASE.\u003c\/li\u003e\n  \u003cli\u003eThe supplied adapter boards are blank: soldering your own flash devices to them is required.\u003c\/li\u003e\n  \u003cli\u003eQSPI evaluation needs board revision A or later.\u003c\/li\u003e\n  \u003cli\u003eThe bundled software is licensed for evaluation and non-commercial use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSEGGER Flash Evaluators Compared\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlash type\u003c\/th\u003e\n\u003cth\u003eDevice mounting\u003c\/th\u003e\n\u003cth\u003eProgramming and debug\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e(Q)SPI Flash Evaluator (this product)\u003c\/td\u003e\n\u003ctd\u003eSPI and QSPI NOR and NAND\u003c\/td\u003e\n\u003ctd\u003eDevices soldered to SO, BGA or SON\/DFN adapter boards\u003c\/td\u003e\n\u003ctd\u003eJ-Link or Flasher, direct or indirect programming\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-40-00-sqspi-flash-evaluator-board\"\u003e£248\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-6-20-12-nand-flash-evaluator-board\"\u003eNAND Flash Evaluator\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eParallel NAND, 8-bit or 16-bit bus\u003c\/td\u003e\n\u003ctd\u003eTSOP48 socket; VFBGA63 adapter as add-on\u003c\/td\u003e\n\u003ctd\u003eJ-Link, 19-pin debug header\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-6-20-12-nand-flash-evaluator-board\"\u003e£270\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-j-link-plus-compact-8-19-28\"\u003eJ-Link PLUS Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eDebug probe with J-Flash SPI included, for direct programming\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-plus-compact-8-19-28\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/es\/products\/segger-8-19-00-j-link-base-compact-debugger\"\u003eJ-Link BASE Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003eDebug probe; J-Flash SPI not included\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eShortlisting QSPI NOR parts in SO-8W or SON packages for a new design by soldering each to an adapter and testing it on the same carrier. Proving direct SPI flash programming with J-Flash SPI and a Flasher before setting up a production programming station. Running emFile journaling on a serial NAND device to check its behaviour before choosing it for a data logging product.\u003c\/p\u003e\n\u003cp\u003eThe board suits firmware engineers selecting serial flash and production engineers planning in-system flash programming.\u003c\/p\u003e\n\n\u003cp\u003eOrder the (Q)SPI Flash Evaluator for \u003cspan data-ds-price=\"segger-6-40-00-sqspi-flash-evaluator-board\"\u003e£248\u003c\/span\u003e ex VAT, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/es\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 16\/11\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (5 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/evaluate-our-software\/segger\/qspi-flash-evaluator\/\"\u003eSEGGER (Q)SPI Flash Evaluator page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/QSPI_Flash_Evaluator\"\u003eSEGGER Knowledge Base: QSPI Flash Evaluator\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/shop.segger.com\/evaluation-boards\/memory\/memory-evaluation-boards\/segger-q-spi-flash-evaluator\"\u003eSEGGER shop: (Q)SPI Flash Evaluator\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003eSEGGER J-Link BASE product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/purchase\/pricing\/evaluation-boards\/\"\u003eSEGGER evaluation boards price list (part numbers)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44272075079903,"sku":"6.40.00","price":248.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-6-40-00-sqspi-flash-evaluator-board-segger-debug-store-uk-40288640860383.jpg?v=1691242317"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/tr-segger-stm32h7-trace-reference-board.png?v=1724770575","url":"https:\/\/thedebugstore.com\/es\/collections\/reference-boards.oembed","provider":"Debug Store","version":"1.0","type":"link"}