{"title":"Development Tools","description":"\u003cp\u003eDebug Store offers a comprehensive range of development tools, including advanced compilers and debuggers, essential for software engineers and programmers. These tools streamline the coding process, enhance productivity, and facilitate efficient error detection and resolution. With user-friendly interfaces and powerful features, Debug Store's products cater to both novice and experienced developers, supporting various programming languages and platforms.\u003c\/p\u003e","products":[{"product_id":"total-phase-tp240141-aardvark-i2c-spi-interface","title":"Total Phase Aardvark I2C\/SPI Host Adapter","description":"\u003csection\u003e\n\u003ch2\u003eFull Description\u003c\/h2\u003e\n\u003cp\u003eThe Total Phase Aardvark I2C\/SPI Host Adapter is a USB-powered host adapter designed for electronic design engineers who need reliable, controllable access to I2C and SPI buses during bring-up, debugging, and production scripting. Operating as both master and slave, it supports I2C at up to 800kHz and SPI at up to 8MHz in master mode (4MHz in slave mode), with a standard 2×5 IDC target connector exposing I2C (SCL\/SDA), SPI (MOSI\/MISO\/SCLK\/SS) and up to six GPIO signals. It interfaces over USB to Windows, Linux, and macOS, and is supplied with the Control Center Serial GUI, Flash Center programming utility, and cross-platform APIs for C\/C\/C#, Python and .NET. With target power output available at +5V for low-current devices and a compact footprint that fits easily on a crowded bench, it provides a dependable link between a computer and digital peripherals without imposing unnecessary complexity.\u003c\/p\u003e\n\u003ch2\u003eUSB to I2C Master\/Slave Control up to 800kHz for Fast Bring-up\u003c\/h2\u003e\n\u003cp\u003eAs an I2C host adapter, the Aardvark operates in both master and slave modes across typical development speeds from a few kilohertz up to 800kHz. This covers Standard-mode (100kHz) and Fast-mode (400kHz) devices comfortably and provides headroom for designs that push closer to 800kHz during evaluation. Master mode enables scripted register access, burst reads, and device initialisation sequences, while slave mode allows engineers to emulate peripherals to test a host SoC’s behavioural edge cases. In practice, this means a board with a temperature sensor and an EEPROM can be validated quickly by writing configuration registers, verifying ACK\/NACK behaviour, and reading back calibration data under repeatable conditions. The direct benefit is reduced time-to-first-success during board bring-up: with deterministic control of bit rate, addressing (7-bit\/10-bit), and transaction framing, engineers can focus on root cause rather than fighting tool setup.\u003c\/p\u003e\n\u003ch2\u003eSPI Master to 8MHz and Slave to 4MHz for Peripheral Exercise\u003c\/h2\u003e\n\u003cp\u003eOn SPI, Aardvark supports master mode up to 8MHz and slave mode up to 4MHz, with control over mode (CPOL\/CPHA), bit order, and chip select handling across the 2×5 IDC header. These rates are well suited to common flash memories, DACs\/ADCs, motor controllers and LED drivers that are rarely exercised above 10MHz during early validation. By driving deterministic patterns and parsing responses in the same session, an engineer can rapidly iterate on timing hypotheses—switching between Mode 0 and Mode 3, for example—to isolate sampling edge issues. When used as an SPI slave, Aardvark can emulate a sensor or memory device to verify that a microcontroller’s SPI driver adheres to command framing and timing requirements, a practical way to catch off-by-one and CS deassertion bugs before firmware freeze. The measurable outcome is fewer lab cycles and clearer pass\/fail criteria for interface readiness.\u003c\/p\u003e\n\u003ch2\u003eStandard 2×5 IDC Target Connector with I2C, SPI and up to Six GPIOs\u003c\/h2\u003e\n\u003cp\u003eThe adapter’s 2×5 IDC (2.54mm pitch) target connector presents a predictable, lab-friendly pinout: I2C (SCL, SDA), SPI (MISO, MOSI, SCLK, SS), ground, +5V target power for low-current devices, and up to six GPIO lines. Engineers benefit from quick swaps between fixtures and DUTs using ribbon cables that are already commonplace on mixed-signal benches. GPIOs can toggle control pins such as resets, enables, or mode selects, or sample status lines to coordinate test steps. This consolidation reduces the need to juggle multiple USB widgets for simple digital manipulation. In a concrete scenario, a GPIO can hold a PMIC in shutdown while SPI writes a configuration to a companion device; then a GPIO release triggers power-up to verify a clean boot sequence under scripted control.\u003c\/p\u003e\n\u003ch2\u003eControl Center Serial GUI for Interactive Debugging and Repeatable Automation\u003c\/h2\u003e\n\u003cp\u003eThe supplied Control Center Serial application makes the Aardvark immediately productive without writing code. Engineers can configure bit rates (I2C up to 800kHz; SPI up to 8MHz), bus modes, and active lines, then compose transactions interactively to poke registers or stream data. Crucially, the GUI supports batch execution via XML scripts, so a proven manual sequence can be captured once and re-run as an automated regression across firmware revisions or PCB spins. This is particularly useful for validating that a board still boots and enumerates properly after an ECO, or that an I2C expander’s configuration survives power cycles. For teams, scripts become lightweight test fixtures—repeatable, reviewable, and version-controlled—without the upfront cost of a full test framework.\u003c\/p\u003e\n\u003ch2\u003eFlash Center Utility for I2C\/SPI EEPROM and Flash Programming\u003c\/h2\u003e\n\u003cp\u003eFor memory programming tasks, the Flash Center utility streamlines operations on I2C and SPI EEPROMs and NOR flash devices using an extensible parts library. Engineers can select a device, set the required speed (e.g., I2C at 400kHz for 24-series EEPROMs or SPI at several megahertz for 25-series flash), and program images with automatic page handling and erase\/write sequencing. This saves time compared to hand-coding page-aligned transactions and status polling, and reduces the chance of subtle mistakes such as failing to wait for WIP bits to clear. In production support, this enables quick field updates to peripheral images or calibration data. During development, it’s invaluable for restoring golden images after deliberate corruption tests or validating that bootloaders correctly read a known-good payload.\u003c\/p\u003e\n\u003ch2\u003eCross-Platform APIs for C\/C\/C#, Python and .NET to Integrate with Test Benches\u003c\/h2\u003e\n\u003cp\u003eThe Aardvark includes cross-platform APIs and bindings for C, C++, C#, Python and .NET on Windows, Linux and macOS. This allows the adapter to plug into existing test harnesses and CI pipelines. Engineers can write concise scripts to exercise I2C at 100kHz for power-on defaults, then switch to 800kHz to stress-read buffers, or sweep SPI from 1MHz to 8MHz to bracket timing margins. Return codes and exceptions can be mapped directly to pass\/fail criteria and logged alongside firmware and PCB revision identifiers. Integrating these scripts with a logic analyser such as a Saleae mixed-signal instrument provides protocol decode corroboration, so a single test run both drives traffic and captures waveforms for later review, tightening feedback loops between hardware and firmware.\u003c\/p\u003e\n\u003ch2\u003eMaster\/Slave Emulation for Host and Peripheral Testing\u003c\/h2\u003e\n\u003cp\u003eBidirectional capability is central to the Aardvark’s role in the lab. In master mode, it stands in for a microcontroller to validate sensors, PMICs, expanders, and displays before firmware is stable. In slave mode, it emulates the target peripheral to harden host drivers, particularly valuable when the real device is back-ordered or when controlled error injection is needed. For instance, by emulating an I2C temperature sensor that NACKs every fourth transaction at 400kHz, firmware robustness to transient errors can be characterised without specialised fixtures. Similarly, an SPI slave emulation at 4MHz can check that the host asserts chip select for the entire frame and respects required inter-byte delays, preventing field issues caused by marginal timing.\u003c\/p\u003e\n\u003ch2\u003eEveryday Debugging Scenarios: From Simple Checks to Edge Cases\u003c\/h2\u003e\n\u003cp\u003eIn a simple scenario, an engineer validating a new sensor board uses I2C master mode at 100kHz to read WHO_AM_I, confirms the expected ID, then increases to 400kHz to stream measurements while adjusting GPIO-controlled ranges. If a register write appears ineffective, a quick cross-check with a logic analyser’s protocol decode confirms a missed stop condition; adjusting the transaction resolves it immediately. In another common case, programming a 25-series SPI flash at 8MHz to load a boot image takes minutes via Flash Center, after which the engineer uses slave mode at 4MHz to emulate a slightly slower device and ensure the host tolerates extended busy times. For edge cases, an engineer can script mid-transaction resets using a GPIO line while monitoring bus behaviour, reproducing elusive bugs such as stuck lines or CS race conditions and capturing them for the firmware team to fix.\u003c\/p\u003e\n\u003ch2\u003ePower and Physical Considerations for Bench Efficiency\u003c\/h2\u003e\n\u003cp\u003eThe adapter is USB bus-powered, eliminating an external PSU and simplifying bench wiring. Target power at +5V is available for low-current devices, which is convenient when validating small breakout boards or low-power peripherals that do not yet have a stable on-board supply. The compact enclosure and standard ribbon cable reduce strain on fragile headers and make it straightforward to leave the adapter connected during extended testing. Engineers focused on 1.8V targets can pair the Aardvark with a suitable level shifter to align logic thresholds, maintaining signal integrity while exercising devices at representative speeds. This modular approach avoids over-investing in features that are only occasionally required, while keeping the core interface accessible and predictable.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Tool in the Total Phase Ecosystem\u003c\/h2\u003e\n\u003cp\u003eThe Aardvark sits alongside other Total Phase tools to cover a wide range of serial workflows. For designs that need much higher bus speeds or integrated, selectable voltage levels, consider stepping up to the Promira Serial Platform, which extends I2C into the multi-megahertz range and SPI beyond tens of megahertz with configurable level shifting and additional I\/O resources. For non-intrusive capture and deep timing analysis, pair the Aardvark with a protocol analyser such as a Saleae mixed-signal logic analyser; this combination lets one tool generate traffic while the other provides timestamped protocol decode and waveform context. Where SPI throughput alone is critical at higher master rates, the Cheetah SPI Host Adapter is an alternative optimised for speed. Selecting among these options ensures the lab covers generation, capture, and performance corners without redundancy.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAardvark vs Other I2C\/SPI Tools\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen selecting an \u003c\/span\u003e\u003cspan\u003eI2C SPI host adapter\u003c\/span\u003e\u003cspan\u003e, it is important to understand how the Aardvark compares to other tools in the same category.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAardvark vs Low-Cost USB I2C Adapters\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBasic USB-to-I2C converters typically:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOnly support master mode\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLack SPI support or advanced control\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDo not include APIs or automation tools\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe Aardvark provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFull master and slave operation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSPI support up to 8 MHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eProfessional-grade APIs and scripting tools\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReliable use in production environments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAardvark vs Total Phase Promira Serial Platform\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Promira Serial Platform is designed for higher-performance applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePromira → higher speed, advanced voltage control, extended features\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAardvark → cost-effective, widely used for everyday development and debugging\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor most engineering workflows, the Aardvark provides the ideal balance of capability and simplicity.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAardvark vs Beagle Protocol Analyzer\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAardvark → active communication tool (generates I2C\/SPI traffic)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBeagle → passive monitoring tool (captures and analyses bus traffic)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMany engineers use both together for full debugging visibility.\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWho Should Use the Total Phase Aardvark\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Aardvark I2C\/SPI Host Adapter is ideal for:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eEmbedded systems engineers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFirmware developers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHardware validation engineers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eElectronics design teams\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eProduction test engineers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eR\u0026amp;D laboratories\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUniversity engineering departments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is especially useful where direct \u003c\/span\u003e\u003cspan\u003eUSB to I2C SPI communication\u003c\/span\u003e\u003cspan\u003e is required for testing and automation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUK Availability – TP240141 Total Phase Aardvark \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Total Phase Aardvark I2C\/SPI Host Adapter (TP240141) is available for purchase in the UK from The Debug Store with full manufacturer compatibility and official software support.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is widely used as a \u003c\/span\u003e\u003cspan\u003eUSB to I2C SPI adapter\u003c\/span\u003e\u003cspan\u003e for embedded development, firmware debugging, EEPROM programming, and SPI Flash programming applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEngineers in the UK looking for a reliable I2C SPI host adapter often choose the Aardvark for its proven performance and cross-platform support. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhether referenced as:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTotal Phase Aardvark UK\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eAardvark I2C SPI host adapter\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUSB to I2C SPI adapter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTP240141 Total Phase Aardvark\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis product remains a standard tool in professional embedded engineering workflows\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cp\u003eFor higher performance and integrated level shifting, explore the \u003ca href=\"https:\/\/thedebugstore.com\/products\/total-phase-promira-serial-platform\"\u003eTotal Phase Promira Serial Platform serial host adapter\u003c\/a\u003e. For dedicated high-speed SPI generation, see the \u003ca href=\"https:\/\/thedebugstore.com\/products\/total-phase-cheetah-spi-host-adapter\"\u003eTotal Phase Cheetah SPI Host Adapter for fast SPI master\u003c\/a\u003e. To complement Aardvark with capture and protocol decode, consider a \u003ca href=\"https:\/\/thedebugstore.com\/collections\/saleae\"\u003eSaleae logic analyser mixed-signal instrument\u003c\/a\u003e for protocol decode and timing correlation during debugging. If low-voltage targets are common, add a suitable level shifter; pairing Aardvark with a \u003ca href=\"https:\/\/thedebugstore.com\/products\/total-phase-level-shifter-board\"\u003eTotal Phase Level Shifter Board for I2C\/SPI voltage translation\u003c\/a\u003e helps maintain signal integrity on 1.8V or 2.5V buses.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37754547896509,"sku":"TP240141","price":335.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp240141-total-phase-aardvark-i2c-spi-host-adapter-tp240141-debug-store-uk-42624390168799.png?v=1717340146"},{"product_id":"smart488-gpib-interface-alciom-uk","title":"Alciom Smart488 GPIB Interface","description":"\u003cp\u003eThe \u003cstrong\u003eAlciom smart488 \u003c\/strong\u003e\u003cstrong\u003eGPIB interface\u003c\/strong\u003e acts as a \u003cstrong\u003eGPIB controller\u003c\/strong\u003e with listener and talker functions and is seen as a virtual serial port from the host PC.\u003c\/p\u003e\n\n\u003cp\u003eThere is no need to scrap your existing test equipment with a GPIB \/ IEEE488 interface. You can now control these expensive items from your own desktop PC or Laptop by using the smart488 USB to GPIB converter.\u003c\/p\u003e\n\n\u003ch2\u003eSimple to Use\u003c\/h2\u003e\n\n\u003cp\u003eYou just need to ensure that you configure your existing GPIB software to treat the smart488 as a virtual COM port and set the GPIB address to 1. The smart488 is ideal for connecting to single instruments with a GPIB interface.\u003c\/p\u003e\n\n\u003ch2\u003eAdvanced Users\u003c\/h2\u003e\n\n\u003cp\u003eMany configuration parameters can be modified to tailor your connection is needed.\u003c\/p\u003e\n\n\u003ch2\u003eLabView Compatible\u003c\/h2\u003e\n\n\u003cp\u003eThe smart488 can be used with\u003cstrong\u003e LabView\u003c\/strong\u003e.  \u003cstrong\u003eLabView example\u003c\/strong\u003es can be downloaded to get you started.\u003c\/p\u003e","brand":"Alciom Sarl","offers":[{"title":"Default Title","offer_id":37768294662333,"sku":"Smart488","price":193.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/alciom-sarl-serial-adapter-smart488-gpib-interface-29817227772093.jpg?v=1685135626"},{"product_id":"pcd-pic-compiler-ccs-uk","title":"CCS PCD PIC C Compiler for PIC24 and DSPIC","description":"\u003cp\u003eThe CCS PCD low-cost C command-line compiler allows you to create 24-bit PIC applications.\u003c\/p\u003e","brand":"Custom Computer Services, Inc","offers":[{"title":"Default Title","offer_id":37768304328893,"sku":"52113-608","price":170.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/custom-computer-services-inc-compiler-pcd-pic-c-compiler-for-pic24-and-dspic-23152094281917.jpg?v=1685142832"},{"product_id":"pcdide-pic-development-tools-ccs-uk","title":"CCS PCDIDE PIC C Compiler","description":"\u003cp\u003eCompiler includes: Standard C pre-processors, operators and statements, interrupt handlers, discrete I\/O, multiple compilation units, constants in ROM, float, ICSP and in-circuit debugging capabilities. For more detailed information on the features and functions of the PCD compiler, Click Board™ here.  The Integrated Development Environment gives developers the capability to quickly produce very efficient code from an easily-maintainable high-level language.  The CCS IDE includes a powerful C-aware editor, debugger, PCD command-line compiler, a powerful serial communication terminal, list file aware filediff, statistics generation and more.  Once you have purchased your software licence you will be able to download the software at any time up to 30 days.  As new releases of software are often made weekly you can be certain to be up to date during the initial 30 days.  You may optionally purchase a maintenance contract during the initial 30 days to extend the download period by a further 12 months.  Technical support is free of charge but maintenance contact customers receive priority support.\u003c\/p\u003e","brand":"Custom Computer Services, Inc","offers":[{"title":"Default Title","offer_id":37768304492733,"sku":"52203-609","price":266.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/custom-computer-services-inc-compiler-pcdide-pic-c-compiler-23152094314685.jpg?v=1685036807"},{"product_id":"sauris-sau100-usb-v1-jtag-emulator-sauris-uk","title":"Sauris SAU100-USB v1 JTAG Emulator","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional JTAG Debugging Made Affordable\u003c\/h2\u003e\n\u003cp\u003eThe Sauris SAU100-USB v1 is a compact, USB-powered JTAG emulator providing professional debugging capabilities for Texas Instruments microcontrollers and DSPs at an exceptional price point. Built to XDS100v2 class specifications, this emulator delivers reliable real-time debugging, code download, and programming functionality through a simple USB 2.0 connection.\u003c\/p\u003e\n\u003ch3\u003eTexas Instruments Compatibility\u003c\/h3\u003e \u003cp\u003eEngineered specifically for TI processor families, the SAU100-USB supports comprehensive debugging across multiple architectures including C2000, C5000, C6000, ARM Cortex-M, ARM Cortex-R, and ARM Cortex-A series processors. Full compatibility with Code Composer Studio V4 and newer versions ensures seamless integration into existing development workflows.\u003c\/p\u003e\n\u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e \u003cdiv class=\"imgph\"\u003eJTAG 14-pin connector wiring diagram placeholder\u003c\/div\u003e \u003cpre\u003e\u003ccode\u003e Pin Assignment (TI 14-pin JTAG Header): Pin 1: TMS (Test Mode Select) Pin 2: nTRST (Test Reset) Pin 3: TDI (Test Data In) Pin 4: TDIS (Test Disconnect) Pin 5: VTRef (Voltage Reference) Pin 6: KEY (No Connection) Pin 7: TDO (Test Data Out) Pin 8: GND (Ground) Pin 9: RTCK (Return Test Clock) Pin 10: GND (Ground) Pin 11: TCK (Test Clock) Pin 12: GND (Ground) Pin 13: EMU0 (Emulation Pin 0) Pin 14: EMU1 (Emulation Pin 1) \u003c\/code\u003e\u003c\/pre\u003e\n\u003ch3\u003eDevelopment Environment Integration\u003c\/h3\u003e \u003cp\u003eThe SAU100-USB integrates directly with Code Composer Studio through standard XDS drivers, eliminating complex setup procedures. USB bus-powered operation requires no external power supply, whilst the compact form factor minimises desk space requirements. LED status indicators provide immediate visual feedback on connection status and emulation activity.\u003c\/p\u003e\n\u003cdiv class=\"spec-note\"\u003e \u003cstrong\u003eVoltage Compatibility:\u003c\/strong\u003e Supports target systems operating at 1.8V to 3.3V logic levels with automatic voltage detection and adjustment. \u003c\/div\u003e\n\u003ch3\u003eReady-to-Run Code Example\u003c\/h3\u003e \u003cpre\u003e\u003ccode\u003e \/\/ Basic CCS connection verification #include \"DSP28x_Project.h\"\nvoid main(void) {\nInitSysCtrl(); \/\/ Initialize system con\nrol InitGpio(); \/\/ Initial\nze GPIO DINT; \/\/ Disable globa\ninterrupts InitPieCtrl(); \/\/ Initia\nize PIE control IER = 0x0000; \/\/ Di\nable CPU interrupts IFR = 0x0000;\nData format:\n\ntext\n\/\/ Enable JTAG debug mode\nSysCtrlRegs.PCLKCR0.bit.TBCLKSYNC = 0;\nEINT;                  \/\/ Enable global interrupts\n\nwhile(1) {\n    \/\/ Debug breakpoint location\n    asm(\" NOP\");       \/\/ Set breakpoint here\n}\n}\n\u003c\/code\u003e\u003c\/pre\u003e\n\n\u003cdiv class=\"aside\"\u003e For optimal debugging performance, ensure target board ground connections are solid and keep JTAG cable length under 15cm to minimise signal integrity issues. \u003c\/div\u003e \u003c\/section\u003e","brand":"Sauris GmbH","offers":[{"title":"Default Title","offer_id":37768316027069,"sku":"SAU100-USB","price":44.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/sauris-gmbh-emulator-sau100-usb-v1-jtag-emulator-23152120823997.jpg?v=1685125550"},{"product_id":"total-phase-tp360310-can-bus-terminator-uk","title":"Total Phase CAN Bus Terminator","description":"","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317337789,"sku":"TP360310","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp360310-total-phase-can-bus-terminator-tp360310-72356340367735.png?v=1732757867"},{"product_id":"total-phase-tp280121-cheetah-spi-adapter-uk","title":"Total Phase Cheetah SPI Host Adapter","description":"\u003csection class=\"product-rich\"\u003e\n\u003ch3\u003eProfessional SPI Host Adapter for High-Performance Applications\u003c\/h3\u003e\n\u003cp\u003eThe Total Phase Cheetah SPI Host Adapter represents the pinnacle of SPI interface technology, specifically engineered for applications demanding maximum performance and reliability. Operating at speeds up to 40+ MHz, this professional-grade adapter delivers the performance required for modern embedded system development and production programming environments.\u003c\/p\u003e\n\u003ch4\u003eAdvanced Architecture and Performance\u003c\/h4\u003e\n\u003cp\u003eThe Cheetah adapter's pipelined architecture enables continuous, gapless data shifting that maximises throughput whilst maintaining precise timing control. This advanced design eliminates the performance bottlenecks common in traditional SPI interfaces, delivering sustained data rates that approach the theoretical maximum of the SPI clock frequency.\u003c\/p\u003e\n\u003cdiv class=\"tbl\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPI Clock Range\u003c\/td\u003e\n\u003ctd\u003e0.1 MHz to 40+ MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Overclocking\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz (experimental)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlave Select Lines\u003c\/td\u003e\n\u003ctd\u003e3 independent (SS1, SS2, SS3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Interface\u003c\/td\u003e\n\u003ctd\u003eHigh-Speed USB 2.0 (480 Mbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget Power Supply\u003c\/td\u003e\n\u003ctd\u003e+5V, 25mA maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4\u003eComprehensive Software Ecosystem\u003c\/h4\u003e\n\u003cp\u003eThe Cheetah adapter includes a complete software suite designed to maximise productivity across the entire development lifecycle. Flash Center Software provides professional-grade memory programming capabilities with support for hundreds of SPI flash and EEPROM devices through an extensible XML-based parts library.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e\n\u003ch4\u003eGang Programming Capability\u003c\/h4\u003e\n\u003cp\u003eConnect multiple Cheetah adapters to a single computer for parallel programming operations, dramatically reducing production line cycle times whilst maintaining programming reliability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eWiring Quick-Start\u003c\/h4\u003e\n\u003cp\u003eThe Cheetah adapter connects to target systems via a standard 10-pin ribbon cable with 2.54mm (0.1\") pitch IDC connector. The pin assignment follows industry standards for maximum compatibility:\u003c\/p\u003e\n\u003cdiv class=\"tbl\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eSS2\u003c\/td\u003e\n\u003ctd\u003eSlave Select 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround Reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eSS3\u003c\/td\u003e\n\u003ctd\u003eSlave Select 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eNC\/+5V\u003c\/td\u003e\n\u003ctd\u003eTarget Power (Optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eMISO\u003c\/td\u003e\n\u003ctd\u003eMaster In, Slave Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eNC\/+5V\u003c\/td\u003e\n\u003ctd\u003eTarget Power (Optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eSCLK\u003c\/td\u003e\n\u003ctd\u003eSerial Clock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eMOSI\u003c\/td\u003e\n\u003ctd\u003eMaster Out, Slave In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eSS1\u003c\/td\u003e\n\u003ctd\u003ePrimary Slave Select\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround Reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"imgph\"\u003e\u003c\/div\u003e\n\u003ch4\u003eEssential Wiring Considerations\u003c\/h4\u003e\n\u003cp\u003eProper grounding is critical for reliable operation. Connect both ground pins (2 and 10) to establish a solid ground reference between the Cheetah adapter and target system. The adapter provides optional +5V target power on pins 4 and 6, capable of supplying up to 25mA for low-power target devices.\u003c\/p\u003e\n\u003ch4\u003eProgramming Example Code\u003c\/h4\u003e\n\u003cp\u003eThe following Python example demonstrates basic SPI communication using the Cheetah API:\u003c\/p\u003e\n\u003cpre\u003e\u003ccode\u003eimport cheetah_py as ch # Open Cheetah adapter handle = ch.ch_open(0) if handle \u0026lt;= 0: print(\"Unable to open Cheetah adapter\") exit() # Configure SPI mode and bitrate ch.ch_spi_configure(handle, ch.CH_SPI_POL_RISING_FALLING, ch.CH_SPI_PHASE_SAMPLE_SETUP, ch.CH_SPI_BITORDER_MSB, 0x0) ch.ch_spi_bitrate(handle, 10000) # 10 MHz # Clear command queue and setup transaction ch.ch_spi_queue_clear(handle) ch.ch_spi_queue_oe(handle, 1) # Enable outputs ch.ch_spi_queue_ss(handle, 0x1) # Assert SS1 ch.ch_spi_queue_byte(handle, 1, 0x9f) # Send READ ID command ch.ch_spi_queue_byte(handle, 3, 0x00) # Read 3 bytes response ch.ch_spi_queue_ss(handle, 0x0) # Deassert SS1 # Execute transaction (ret, data_in) = ch.ch_spi_batch_shift(handle, 0) print(f\"Device ID: {data_in:02x} {data_in:02x} {data_in:02x}\")[1][2][3] ch.ch_close(handle)\u003c\/code\u003e\u003c\/pre\u003e\n\u003ch4\u003eFlash Memory Programming Workflow\u003c\/h4\u003e\n\u003cp\u003eProgramming SPI flash memory with the Cheetah adapter and Flash Center Software follows a streamlined workflow optimised for both development and production environments:\u003c\/p\u003e\n\u003col class=\"spec-note\"\u003e\n\u003cli\u003eConnect target flash device via ribbon cable\u003c\/li\u003e\n\u003cli\u003eLaunch Flash Center Software and detect adapter\u003c\/li\u003e\n\u003cli\u003eSelect memory device from extensive parts library\u003c\/li\u003e\n\u003cli\u003eLoad programming data (binary, hex, or S-record formats)\u003c\/li\u003e\n\u003cli\u003eExecute erase, program, and verify sequence\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"callout\"\u003e\n\u003ch5\u003ePerformance Benchmark\u003c\/h5\u003e\n\u003cp\u003eThe Cheetah adapter can erase, program, and verify a typical 1MB SPI flash memory in approximately 23 seconds, with the main limitation being the flash memory's page commit time rather than the adapter's transfer speed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eDevelopment Environment Integration\u003c\/h4\u003e\n\u003cp\u003eCross-platform API support enables seamless integration into existing development workflows. The Cheetah API provides comprehensive control over all adapter functions, with example code available for C\/C++, Python, C#, and LabVIEW development environments.\u003c\/p\u003e\n\u003cp\u003eFor automated testing and production environments, XML batch scripting capabilities in Control Center Serial Software enable complex test sequences to be executed without manual intervention, improving both efficiency and repeatability.\u003c\/p\u003e\n\u003ch4\u003eQuality and Compliance\u003c\/h4\u003e\n\u003cp\u003eManufactured to professional standards with CE, REACH, and RoHS compliance, the Cheetah adapter meets international regulatory requirements for professional and industrial applications. Each unit includes a comprehensive one-year warranty backed by Total Phase's professional support team.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317403325,"sku":"TP280121","price":475.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp280121-total-phase-cheetah-spi-host-adapter-tp280121-debug-store-uk-42654128275679.png?v=1717575587"},{"product_id":"total-phase-tp240810-dvi-ddc-breakout-cable","title":"Total Phase TP240810 DVI DDC Breakout Cable","description":"\u003cp\u003eThe DVI DDC Breakout Cable is a standard 2 metre DVI-D single link cable (DVI-male to DVI-male) with an additional 5x2 0.100\" pitch keyed box connector to provide a convenient way to access the Display Data Channel (DDC) lines with a Beagle™ I2C\/SPI Protocol Analyser or an Aardvark™ I2C\/SPI Host Adapter\u003c\/p\u003e\n\n\u003ctable border=\"0\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px;\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp\u003e \u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd\u003e\n            \u003ctable style=\"border-spacing:0px;font-size:13px;font-family:arial, helvetica, 'Luxi Sans', sans-serif;font-style:normal;font-variant:normal;font-weight:normal;letter-spacing:normal;line-height:16px;text-align:left;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;\"\u003e\n                \u003ctbody\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003eDVI Pin\u003c\/strong\u003e\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003e10-pin Header Pin\u003c\/strong\u003e\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SCL\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 6\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 1\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SDA\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 7\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 3\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC GND\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 15\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 2\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e .\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317599933,"sku":"TP240810","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-dvi-ddc-breakout-cable-23151993651389.jpg?v=1685009283"},{"product_id":"total-phase-tp360110-komodo-can-duo-adapter","title":"Total Phase Komodo CAN Duo Interface","description":"\u003ch3\u003eFull-Featured CAN Adapter\u003c\/h3\u003e\n\n\u003cp\u003eThe Komodo CAN Duo Interface can operate as a CAN node, to send and receive messages, on up to two different CAN networks. Communicate with any type of CAN network, from automotive systems to industrial controls. The Komodo interface operates at up to a maximum bitrate of 1 Mbps.\u003c\/p\u003e\n\n\u003ch3\u003eFlexible Design\u003c\/h3\u003e\n\n\u003cp\u003eConfigure each CAN channel independently as either an adapter or a non-intrusive analyser. Communicate and\/or monitor two different CAN buses with a single Komodo interface.\u003c\/p\u003e\n\n\u003ch3\u003eTrue Real-Time Monitoring\u003c\/h3\u003e\n\n\u003cp\u003e\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" height=\"150\" src=\"https:\/\/www.youtube.com\/embed\/htKcPBulIk4\" width=\"300\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003enon-intrusively monitor up to 2 different CAN buses and see the data as it is captured. Each channel of the Komodo interface is independently, galvanically isolated and can capture CAN data at up to 1 Mbps.\u003c\/p\u003e\n\n\u003ch3\u003eGPIO\u003c\/h3\u003e\n\n\u003cp\u003eThe 8-GPIO pins can be configured for input or output, allowing the Komodo interface to communicate with external logic.\u003c\/p\u003e\n\n\u003ch3\u003eIndustrial Grade\u003c\/h3\u003e\n\n\u003cp\u003eThe Komodo CAN Duo Interface is rated for operating temperatures from -40°C to +85°C (non-condensing).\u003c\/p\u003e\n\n\u003ch3\u003eLow Cost\u003c\/h3\u003e\n\n\u003cp\u003e\u003cimg alt=\"No Hidden Fees\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/www.totalphase.com\/media\/wysiwyg\/no-hidden-fees.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/no-hidden-fees_1.png?v=1627554212\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Komodo CAN Duo Interface comes complete with a royalty-free API.\u003c\/p\u003e\n\n\u003cp\u003eThe low cost makes it affordable for a company to provide every developer with their own interface. The benefits of every developer having their own interface are:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eLess time wasted\u003c\/strong\u003e because developers do not have to share tools or go to the lab to debug simple problems.\u003c\/li\u003e\n\t\u003cli\u003eLess wasted time means \u003cstrong\u003ehigher productivity\u003c\/strong\u003e because developers can identify and fix problems quickly and easily with less down-time.\u003c\/li\u003e\n\t\u003cli\u003eHigher productivity means \u003cstrong\u003eshorter development cycles\u003c\/strong\u003e. Projects get done on time and on budget.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eBy saving just a few hours of engineering time, the Komodo CAN Duo Interface will have paid for itself.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFuture-Proof\u003c\/h3\u003e\n\n\u003cp\u003eThe Komodo interface is completely field-upgradable via USB. Total Phase is committed to improving the Komodo interface and making these improvements available to our customers.\u003c\/p\u003e\n\n\u003cp\u003eYou will never have to worry about being out of step with the latest software features.\u003c\/p\u003e\n\n\u003ch3\u003eMinimum Hardware requirements\u003c\/h3\u003e\n\n\u003cp\u003e• Intel or AMD processor operating at 2 gigahertz (GHz) or faster\u003cbr\u003e\n• 1 gigabyte (GB) physical RAM (32-bit) or 2 GB RAM (64- bit)\u003cbr\u003e\n• 2 GB or more available hard disk space\u003cbr\u003e\n• High-speed USB port\u003cbr\u003e\n• VGA capable of 1024x768 or higher screen resolution\u003cbr\u003e\n• Internet access is helpful\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317927613,"sku":"TP360110","price":650.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp360110-total-phase-komodo-can-duo-interface-42654260101343.png?v=1717577205"},{"product_id":"total-phase-tp320610-usb-mini-otg-cable-set","title":"Total Phase TP320610 USB Mini OTG Cable Set","description":"\u003cp\u003eThe short lengths of these cables ensure that the total cable length between host and device stays below the specified minimum to avoid data timing issues.\u003c\/p\u003e\n\n\u003cp\u003eThese cables are rated for high-speed data transmission.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318156989,"sku":"TP320610","price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-usb-mini-otg-cable-set-28938642423997.jpg?v=1685180999"},{"product_id":"total-phase-tp-240212-10-pin-split-cable-uk","title":"Total Phase TP240212 10 pin Split Cable","description":"\u003cp\u003eThe Total Phase TP240212 cable is for connecting the Aardvark™, Beagle™ or Cheetah™ to header pins or IC legs on your target boards.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318353597,"sku":"TP240212","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp240212-total-phase-10-pin-split-cable-tp240212-72356315726199.png?v=1732757875"},{"product_id":"total-phase-tp240411-split-cable-with-grabbers-uk","title":"Total Phase TP240411 Split Cable with Grabbers","description":"\u003cp\u003eThe 10-Pin Grabber Clip Split Cable has a 10-pin box header that attaches to the ribbon cable. Each individual lead has a different colour and is labelled with the pin name so that they are easy to identify.\u003c\/p\u003e\n\n\u003cp\u003e10 - individually colour coded grabber clips are included:.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Grabber Probe Clips\" class=\"fr-fic fr-dii\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"http:\/\/www.thedebugstore.com\/files\/Images\/Inline\/Inline-Probe-Drawing-1.jpg\" style=\"width:300px;height:127px;\"\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe connector is a standard 5x2 0.100\" (2.54mm) pitch IDC type keyed box connector. Each individual lead is terminated with a single pin crimp connector with the same 0.100\" (2.54mm) pitch. The cable is only 5\" (12.7cm) long to minimize signal degradation.\u003c\/p\u003e\n\n\u003ch3\u003eUniversal Use\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e10-Pin Grabber Clip Split Cable\u003c\/strong\u003e is an incredibly useful tool that will save you from having to create or purchase adapter boards for your 10-pin ribbon cable. Although it is labelled with the Aardvark™ I2C\/SPI Host Adapter and Beagle™ I2C\/SPI Protocol Analyser specific pinout, this split cable is universally adaptable to a variety of applications.\u003c\/p\u003e\n\n\u003cp\u003eThis split cable will connect to any standard 0.100\" (2.54mm) pitch 10-pin keyed female IDC-type connector.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318386365,"sku":"TP240411","price":70.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-total-phase-tp240411-split-cable-with-grabbers-38321715445983.jpg?v=1685072283"},{"product_id":"total-phase-tp240910-vga-ddc-breakout-cable","title":"Total Phase TP240910 VGA DDC Breakout Cable","description":"\u003cp\u003eThe VGA DDC Breakout Cable is a standard 2 metre VGA cable (HD15-male to HD15-male) with an additional 5x2 0.100\" pitch keyed box connector to provide a convenient way to access the Display Data Channel (DDC) lines with a Beagle™ I2C\/SPI Protocol Analyser or an Aardvark™ I2C\/SPI Host Adapter.\u003c\/p\u003e\n\n\u003ctable style=\"border-spacing:0px;font-size:13px;font-family:arial, helvetica, 'Luxi Sans', sans-serif;font-style:normal;font-variant:normal;font-weight:normal;letter-spacing:normal;line-height:16px;text-align:left;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003eVGA Pin\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003e10-pin Header Pin\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SCL\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 15\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 1\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SDA\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 12\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 3\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC GND\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 10\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 2\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318451901,"sku":"TP240910","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp240910-total-phase-vga-ddc-breakout-cable-tp240910-72357991874935.png?v=1732757878"},{"product_id":"mikroe-mikroc-pro-arm-c-compiler-uk","title":"mikroC PRO for ARM C Compiler with USB Dongle","description":"\u003cp\u003eMikroC PRO for ARM Cortex C compiler with USB Dongle Licence.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":40898121662653,"sku":"MIKROE-936","price":419.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikroc-pro-for-arm-usb-dongle-29795491971261.jpg?v=1685095680"},{"product_id":"mikroe-1100-mikroprog-stm32-uk","title":"MikroProg for STM32","description":"\u003cp\u003eThe\u003cstrong\u003e mikroProg for STM32\u003c\/strong\u003e is a fast programmer and hardware debugger based on ST-LINK v2. Smart engineering allows mikroProg to support all STM32 ARM Cortex™-M0, Cortex™-M3 and Cortex™-M4 and Cortex™-M7 devices in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika ARM compilers (mikroC, mikroBasic, mikroPascal).\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e mikroProg™ for STM32 is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for ARM®. Works with other ARM® compilers too!\u003c\/p\u003e\n\n\u003ch3\u003eSingleClick™ Debugging\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ has native support for hardware step-by-step Debugging. debugger is a separate DLL module in mikroElektronika ARM® compilers which supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6], Run To Cursor[F4] debugging operations. Also, debugger supports standard and advanced breakpoints, which enable you to exploit the full potential of fast debugging.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eOn board mikroProg™ programmer requires special programming software called mikroProg™ for ARM®. This software is used for programming ALL of STM32 ARM® Cortex-M3™ microcontroller families, Software has intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332673213,"sku":"MIKROE-1100","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-stm32-36570047119583.jpg?v=1684955815"},{"product_id":"mikroe-1505-mikroprog-ti-tiva-uk","title":"MikroProg for Tiva","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg for Tiva\u003c\/strong\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support all Tiva C Series and Stellaris ARM Cortex-M3 and Cortex-M4 devices from Texas Instruments in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in mikroElektronika ARM compilers.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikroprog-8051.jpg\" alt=\"Mikroprog for Tiva Debugger\/Programmer\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003ch2\u003eCompiler Compatibility\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMikroProgfor Tiva\u003c\/strong\u003e is supported with mikroC, mikroBasicand mikroPascalcompilers for ARM\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332705981,"sku":"MIKROE-1505","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-tiva-36570068123871.jpg?v=1684955808"},{"product_id":"mikroe-1383-mikroprog-atmel-avr-debugger-programmer-uk","title":"MikroProg for AVR","description":"\u003ch3\u003emikroProg for AVR\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003emikroProg for AVR \u003c\/strong\u003e is a fast USB programmer. Smart engineering allows mikroProg to support 92 Atmel AVR devices in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika AVR compilers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for AVR\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility \u003c\/strong\u003e \u003cstrong\u003emikroProg™ for AVR®\u003c\/strong\u003e is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for AVR®. You may also use mikroProg™ for AVR® as a standalone programming tool.\u003c\/p\u003e\n\n\u003ch3\u003eSame pinout as AVRProg\u003c\/h3\u003e\n\n\u003cp\u003eWe made sure to retain backward compatibility with our popular AVRProg programmer. This means that you can use mikroProg™ with your existing designs or mikroElektronika development boards for AVR® where IDC10 programming headers are already integrated.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for AVR connector\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/www.mikroe.com\/img\/cms\/mikroprog-connector-idc10-a.jpg\" src=\"https:\/\/www.mikroe.com\/img\/cms\/mikroprog-connector-idc10-a.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for AVR inside\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_for_avr_inside.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_for_avr_inside.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eOn board mikroProg programmer requires special programming software called AVRFlash. It is used for programming over 90 Atmel AVR microcontrollers. Software has intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroprog_for_avr_inside.jpg\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/screen-avr.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/screen-avr.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003emikroProg™ for AVR®\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332738749,"sku":"MIKROE-1383","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-avr-29818697220285.jpg?v=1685132386"},{"product_id":"mikroe-1748-mikroprog-ftdi-ft90x-uk","title":"MikroProg for FT90x","description":"\u003csection id=\"info-description\"\u003e\n\u003ch3\u003emikroProg for FT90x\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003emikroProg for FT90x\u003c\/strong\u003e\u003c\/em\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support all FTDI Chip's 32-bit FT90x MCUs in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in mikroElektronika FT90x compilers.\u003c\/p\u003e\n\u003cimg alt=\"mikroProg for FT90x connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\n\u003ch3\u003eSupports Your Favorite Boards\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003emikroProg for FT90x\u003c\/strong\u003e has a connector for one-wire programming and debugging, compatible with boards like clicker 2 for FT90x (all upcoming FT90x hardware tools will also have built-in support)\u003c\/p\u003e\n\u003cimg alt=\"mikroProg for FT90x with clicker 2 ft90x\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/clicker2_ft900_mikroprog.jpg\" width=\"100%\"\u003e\n\u003ch3\u003eYou Won't Rip Out The Cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programmer cable and created a holder to tie it firmly into place.\u003c\/p\u003e\n\u003cimg alt=\"mikroProg for FT90x cable\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_cable.jpg\" width=\"100%\"\u003e\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eA standalone programming software utility called mikroProg Suite™ for FT90x® is available as an alternative to programming the MCU directly from the FT90x compiler. This software is used for programming of all supported FT90x microcontrollers. The software has an intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003emikroProg™ for FT90x 5LP programmer\/debugger\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332771517,"sku":"MIKROE-1748","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-ft90x-29029285068989.jpg?v=1685132042"},{"product_id":"mikroe-1382-mikroprog-8051-debugger-programmer-uk","title":"MikroProg for 8051","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003emikroProg for 8051 \u003c\/strong\u003e\u003c\/em\u003eis a fast USB programmer. Smart engineering allows mikroProg to support Atmel AT89 devices in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika 8051 compilers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for 8051 connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003emikroProg™ for 8051\u003c\/strong\u003e is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for 8051. You may also use \u003cstrong\u003emikroProg™ for 8051\u003c\/strong\u003e as a standalone programming tool.\u003c\/p\u003e\n\n\u003ch3\u003eSame Pinout as 8051Prog2\u003c\/h3\u003e\n\n\u003cp\u003eWe made sure to retain backward compatibility with our popular 8051Prog2 programmer. This means that you can use mikroProg™ with your existing designs or mikroElektronika development boards for 8051 where IDC10 programming headers are already integrated.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for 8051 connector\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-8051-connector.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eYou Won't rip Out the Cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programmer cable and created a holder to tie it firmly into place.\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eOn board mikroProg™ programmer requires special programming software called 8051Flash. It is used for programming ALL of Atmel® AT89 microcontrollers. Software has intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"8051flash-window-screen.jpg\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/8051flash-window-screen.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003emikroProg™ for 8051\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332837053,"sku":"MIKROE-1382","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-8051-29818681491645.jpg?v=1685132210"},{"product_id":"mikroprog-microchip-pic-debugger-programmer-mikroe-764-uk","title":"MikroProg for PIC, DSPIC and PIC32","description":"\u003cp\u003e\u003cstrong\u003emikroProg for PIC, dsPIC and PIC32\u003c\/strong\u003e is a fast USB 2.0 programmer with mikroICD™ hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30\/33, PIC24 and PIC32 devices in a single programmer! It supports over 1000 microcontrollers from Microchip. Outstanding performance, easy operation and elegant design are it's top features. Debug your code and monitor code execution on the chip itself. mikroProg™ technology brings the power of hardware debugging to your favorite compiler.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompiler Compatibility \u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for PIC®, dsPIC® and PIC32®. Choose the flavour that you like the most.\u003c\/p\u003e\n\n\u003ch3\u003eFaster programming\u003c\/h3\u003e\n\n\u003cp\u003eWe have done major enhancements in programming and debugging algorithms, and boosted programmer electronics to make it all possible. And the results are stunning! mikroProg™ is up to 400% faster than LvPICFlash.\u003c\/p\u003e\n\n\u003ch3\u003eSingleClick™ Debugging\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ has native support for mikroICD™ - hardware step-by-step In-Circuit Debugging in mikroElektronika compilers. It supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6] Run To Cursor[F4] debugging operations, as well as standard and advanced breakpoints.\u003c\/p\u003e\n\n\u003ch3\u003eOne firmware for all Devices\u003c\/h3\u003e\n\n\u003cp\u003eWith mikroProg™, single firmware takes care of all supported architectures. Supporting new microcontrollers is easy. Just by downloading the latest version of mikroProg Suite™ your programmer is ready to program new devices.\u003c\/p\u003e\n\n\u003ch3\u003ePower your Target Board\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ can provide power supply to your target board. Using mikroProg Suite™ Software, or directly from your compiler you can set the voltage level to be generated for you. It can provide up to 150mA of current in the voltage range from 1.8–5V.\u003c\/p\u003e\n\n\u003ch3\u003eCompatible with PICFlash\u003c\/h3\u003e\n\n\u003cp\u003eIf you have already integrated previous programmer connector in your device, don't worry. mikroProg™ retained the original connector pinout. Use front row of the connector (next to the knob) when programming mikromedia boards.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidentally and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332869821,"sku":"MIKROE-764","price":199.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-pic-dspic-and-pic32-29818741391549.jpg?v=1685132390"},{"product_id":"mikroe-1449-mikroprog-psoc-5lp-uk","title":"MikroProg for PSoC 5LP","description":"\u003ch3\u003emikroProg for PSoC 5LP\u003c\/h3\u003e\n\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003emikroProg for PSoC\u003c\/strong\u003e\u003c\/em\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support all PSoC 5LP ARM Cortex™-M3 devices from Infineon in a single programmer! It's also supported in PSoC® Creator IDE. Outstanding performance, easy operation, elegant design and a low price are its top features.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for PSoC 5LP connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_8051_connected.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e \u003cstrong\u003emikroProg™ for PSoC® 5LP\u003c\/strong\u003e is supported in PSoC® Creator™, the free Windows-based IDE from Infineon which allows concurrent hardware and firmware design.\u003c\/p\u003e\n\n\u003ch3\u003eSupports your favorite boards\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003emikroProg™ for PSoC®\u003c\/strong\u003e features IDC10 JTAG connector for SWD programming and debugging, compatible with boards like mikromedia for PSoC® 5LP. You can also use an adapter to connect it to Cortex Debug connectors found on other PSoC® boards as well.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eBefore you start working with \u003cstrong\u003emikroProg for PSoC 5LP\u003c\/strong\u003e , you'll need to download PSoC® Programmer™ from Infineon's website (registration required). It is a programming application with the necessary Windows drivers included. For detailed instructions on installing the software and more information about the programmer itself.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for PSoC 5LP programmer software\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/psoc_programmer_software.png\" width=\"69%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003emikroProg™ for PSoC® 5LP\u003c\/strong\u003e programmer\/debugger\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332902589,"sku":"MIKROE-1449","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-psoc-5lp-29880948785341.jpg?v=1685106475"},{"product_id":"mikroe-mikroc-pro-dspic-c-compiler-uk","title":"mikroC PRO for dsPIC C Compiler","description":"\u003cp\u003eMikroC PRO for dsPIC compiler with USB Dongle Licence.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40898092728509,"sku":"MIKROE-734","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40898092761277,"sku":"MIKROE-1949","price":349.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikroc-pro-for-dspic-usb-dongle-29795644473533.jpg?v=1685137967"},{"product_id":"mikroe-mikroc-pro-pic-uk","title":"mikroC PRO for PIC C Compiler","description":"\u003ch1\u003eYou Will Love mikroC!\u003c\/h1\u003e\u003ch2\u003eOne-Time Payment, Lifetime Licence\u003c\/h2\u003e\u003cp\u003ePay once and never worry about it again. Once you buy the compiler you are entitled to lifetime free upgrades. Upgrading the compiler takes only a few minutes and a few Click Board™s. We are constantly adding new features to the compiler, you can keep track of what is happening on the Software Roadmap page.\u003c\/p\u003e\u003cp\u003eOur support team is always available you can rely on our help while you are developing. The compiler license guarantees free product lifetime technical support.\u003c\/p\u003e\u003ch2\u003e1000 Library Functions\u003c\/h2\u003e\u003cp\u003eMikroC offers a unique mechanism to easily use libraries in your project, just select the libraries you need and they will be instantly available in your code. No need for dozens of #include directives. You can also install and manage third-party libraries using our package manager and library manager.\u003c\/p\u003e\u003cp\u003eSimply select the libraries you need for your project, by checking the box. Or press the Check Allbutton to include them all.\u003c\/p\u003e\u003cp\u003eWith more than 1000 library functions youll save time, effort and youll write better code.\u003c\/p\u003e\u003cp\u003eVisit LibStock and download fully functional and working projects, and install them with a single Click Board™.\u003c\/p\u003e\u003ch2\u003e153 Examples\u003c\/h2\u003e\u003cp\u003eEvery single library that is in our compiler is covered by a working example. More than 153 ready-made working examples, to help you understand how the library works or give you useful code snippets for your project.\u003c\/p\u003e\u003ch2\u003e619 Supported MCUs\u003c\/h2\u003e\u003cp\u003eThe mikroC PRO for PIC currently supports over 619 MCUs and we are constantly adding new ones.\u003cbr\u003eYou can be part of the process by letting us know what microcontroller you wish to see supported next, by using our helpdesk and submitting a ticket.\u003c\/p\u003e\u003cp\u003eCreate Amazing User Interfaces thanks to the Integrated Visual TFT.\u003c\/p\u003e\u003cp\u003eThe integrated solution allows for a streamlined workflow. Drag and drop graphic elements while the compiler generates the code automatically in the background. Modify the generated code in the compiler and create event functions. Seamlessly switch between designing and coding using keyboard shortcut F12.\u003c\/p\u003e\u003ch2\u003eTry it Out for Yourself and Create Fully Functional GUIs with just a Few Click Board™s.\u003c\/h2\u003e\u003cp\u003eAnd dont worry about the code, the compiler will take care of that.\u003c\/p\u003e\u003cp\u003eTo enable Visual TFT, you need to acquire the Visual TFT license separately. That is why we prepared a 30% discount on the Visual TFT software if you purchase it with the compiler.\u003c\/p\u003e\u003cp\u003eVisual TFT supports 17 TFT controllers and five different display resolutions. So, we even have the hardware prepared for your next graphic project.\u003c\/p\u003e\u003ch2\u003eIntegrated Development Environment (IDE)\u003c\/h2\u003e\u003cp\u003eThe ideal environment for you to write, compile, execute, and debug your code. All the tools you could think of, and more, are there. The Library Manager, Interrupt Assistant, Project Explorer, Quick Converter and more.\u003c\/p\u003e\u003ch2\u003eThe Perfect Toolbox\u003c\/h2\u003e\u003cp\u003eMikroC comes equipped with fully-functional software tools that can boost your efficiency and do the job for you, so you can be more productive in your work: LCD Custom Character Tool, GLCD Bitmap Editor, Seven Segment Editor, UART Terminal, UDP Terminal, HID Terminal, ASCII Chart, Active Comments Editor, Interrupt Assistant, Advanced Statistics and much, much more.\u003c\/p\u003e\u003ch2\u003eHardware Debugging\u003c\/h2\u003e\u003cp\u003eDetect and correct all the code errors in seconds. mikroC has native support for hardware debugging when used with the mikroProg in-circuit programmer and debugger. It supports Step-over, Step-into, Step-out, Run, and Run To Cursor debugging operations. Also, the debugger supports standard and advanced breakpoints, which enable you to exploit the full potential of hardware debugging.\u003c\/p\u003e\u003ch2\u003eComprehensive Documentation\u003c\/h2\u003e\u003cp\u003eThe help file is the best place to start if you want to get to know the compiler. The easy-to-read format and detailed explanations of every functionality and feature will make you an expert in no time..\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40898080211133,"sku":"MIKROE-736","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40898080243901,"sku":"MIKROE-1943","price":349.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikroc-pro-for-pic-usb-dongle-29795551477949.jpg?v=1685138517"},{"product_id":"mikroe-mikroc-pro-pic32-c-compiler-uk","title":"mikroC PRO for PIC32 C Compiler with Dongle","description":"\u003csection\u003e\n\u003ch2\u003eYou'll Love mikroC!\u003c\/h2\u003e\n\n\u003ch2\u003e1-Time Payment, Lifetime LIcence\u003c\/h2\u003e\n\n\u003cp\u003ePay once and never worry about it again. Once you buy the compiler you are entitled to lifetime free upgrades. Upgrading the compiler takes only a few minutes and a few clicks. We are constantly adding new features to the compiler, you can keep track of what is happening on the Software Roadmap page.\u003c\/p\u003e\n\n\u003cp\u003eOur support team is always available – you can rely on our help while you are developing. The compiler license guarantees free product lifetime technical support.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003e1200 Library Functions\u003c\/h2\u003e\n\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003emikroC PRO for PIC32 \u003c\/strong\u003e\u003c\/em\u003eoffers a unique mechanism to easily use libraries in your project, just select the libraries you need and they will be instantly available in your code. No need for dozens of #include directives. You can also install and manage third-party libraries using our package manager and library manager.\u003c\/p\u003e\n\n\u003cp\u003eSimply select the libraries you need for your project, by checking the box. Or press the \u003cem\u003e\"Check All\" \u003c\/em\u003ebutton to include them all.\u003c\/p\u003e\n\n\u003cp\u003eWith more than 1200 library functions you'll save time, effort and you'll write better code.\u003c\/p\u003e\n\n\u003cp\u003eVisit LibStock and download fully functional and working projects, and install them with a single click.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/arm\/highilghts\/1200-libs-img.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/arm\/highilghts\/1200-libs-img.jpg\"\u003e\u003c\/section\u003e\n\n\u003csection\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-examples-overview.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-examples-overview.jpg\"\u003e\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003e100 EXAMPLES\u003c\/h2\u003e\n\n\u003cp\u003eEvery single library that is in our compiler is covered by a working example. More than 100 ready-made working examples, to help you understand how the library works or give you useful code snippets for your project.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003e187 SUPPORTED MCUs\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003emikroC PRO for PIC32 compiler\u003c\/strong\u003e\u003c\/em\u003e currently supports 187 PIC32 and we are constantly adding new ones.\u003c\/p\u003e\n\n\u003cp\u003eDownload a List of supported MCU devices from the Downloads tab.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eFreeRTOS\u003c\/h2\u003e\n\n\u003cp\u003eWith the release 4.0.0 MikroE have implemented support for FreeRTOS. All your complex projects will be organized and ordered. Accomplishing numerous different tasks with ease.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003csection\u003e\n\u003ch2\u003eCreate Amazing User Interfaces\u003c\/h2\u003e\n\n\u003cp\u003eThe integrated solution allows for a streamlined workflow. Drag and drop graphic elements while the compiler generates the code automatically in the background. Modify the generated code in the compiler and create event functions. Seamlessly switch between designing and coding using keyboard shortcut F12.\u003c\/p\u003e\n\n\u003cp\u003eTry it out for yourself and create fully functional GUIs with just a few clicks. And don't worry about the code, the compiler will take care of that.\u003c\/p\u003e\n\n\u003cp\u003eVisual TFT supports 17 TFT controllers and multiple display resolutions. So, we even have the hardware prepared for your next graphic project.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-vtft-overview.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-vtft-overview.jpg\"\u003e\u003c\/section\u003e\n\n\u003csection\u003e\n\u003csection\u003e \u003c\/section\u003e\n\n\u003csection\u003e \u003c\/section\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-ide-overview.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-ide-overview.jpg\"\u003e\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eIDE\u003c\/h2\u003e\n\n\u003cp\u003eThe ideal environment for you to write, compile, execute, and debug your code. All the tools you could think of, and more, are there. The Library Manager, Interrupt Assistant, Project Explorer, Quick Converter and more.\u003c\/p\u003e\n\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/arm\/highilghts\/ide-main-overview-img-22.png\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/arm\/highilghts\/ide-main-overview-img-22.png\"\u003e\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eThe Perfect Toolbox\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003emikroC PRO for PIC32\u003c\/strong\u003e comes equipped with fully functional software tools that can boost your efficiency and do the job for you, so you can be more productive in your work: LCD Custom Character Tool, GLCD Bitmap Editor, Seven Segment Editor, UART Terminal, UDP Terminal, HID Terminal, ASCII Chart, Active Comments Editor, Interrupt Assistant, Advanced Statistics and much, much more.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-tools-overview.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-tools-overview.jpg\"\u003e\u003c\/section\u003e\n\n\u003csection\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-debug-overview.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-debug-overview.jpg\"\u003e\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eHardware Debugging\u003c\/h2\u003e\n\n\u003cp\u003eDetect and correct all the code errors in seconds. mikroC has native support for hardware debugging when used with the mikroProg in-circuit programmer and debugger. It supports Step-over, Step-into, Step-out, Run, and Run To Cursor debugging operations. Also, the debugger supports standard breakpoints, which enable you to exploit the full potential of hardware debugging.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eComprehensive Documentation\u003c\/h2\u003e\n\n\u003cp\u003eThe help file is the best place to start if you want to get to know the compiler. The easy-to-read format and detailed explanations of every functionality and feature will make you an expert in no time.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-help-overview.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-help-overview.jpg\"\u003e\u003c\/section\u003e\n\n\u003csection\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-licensing-overview.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/pic32\/highlights\/mikroc-pic32-licensing-overview.jpg\"\u003e\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eFlexible Licensing Options\u003c\/h2\u003e\n\n\u003ch4\u003eLICENSE CODE\u003c\/h4\u003e\n\n\u003cp\u003eBuy the compiler and the License Code will be sent to your inbox instantly. Once you activate the license you can use it on up to two computers.\u003c\/p\u003e\n\n\u003ch4\u003eUSB DONGLE\u003c\/h4\u003e\n\n\u003cp\u003eDo you need a portable license, that can be used on multiple computers? USB Dongle license is the perfect solution.\u003c\/p\u003e\n\n\u003ch4\u003eSITE LICENSE\u003c\/h4\u003e\n\n\u003cp\u003eOwn, manage, and deploy multiple software licenses. Instead of buying several licenses at a regular price, use the Site License option and get licenses for your whole team or class at a special price. Learn more.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eStart Developing Out of the Box!\u003c\/h2\u003e\n\n\u003cp\u003eFor a complete development Kit, take a look at MikroLAB.\u003c\/p\u003e\n\n\u003cp\u003eCode, compile, program, and debug – all in one environment. Choose the development board, and you'll soon see that the rest of the tools are perfectly arranged around it.\u003c\/p\u003e\n\n\u003cp\u003emikroLab contains everything a developer needs to explore the possibilities of the microcontroller architectures we offer: a development board (with integrated programmer and debugger), the compiler license, an assortment of accessories, and as a bonus, a free license for one of our GUI design tools (either Visual TFT or Visual GLCD).\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":40897881604285,"sku":"MIKROE-738","price":419.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikroc-pro-for-pic32-usb-dongle-30239938740413.jpg?v=1685023134"},{"product_id":"mikroe-mikroc-pro-8051-c-compiler-uk","title":"mikroC PRO for 8051 C Compiler","description":"\u003cp\u003eMikroC PRO for 8051 - USB Dongle Licence.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40898102689981,"sku":"MIKROE-730","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40898102722749,"sku":"MIKROE-1457","price":349.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikroc-pro-for-8051-usb-dongle-30167261642941.jpg?v=1685067421"},{"product_id":"mikropascal-pro-8051-pascal-compiler-uk","title":"mikroPascal PRO for 8051","description":"\u003ch1\u003eYou will love mikroPascal!\u003c\/h1\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-8051.jpg\" alt=\"MikroPascal PRO for 8051\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003ch2\u003eOne-Time Payment, Lifetime Licence\u003c\/h2\u003e\u003cp\u003ePay once and never worry about it again. Once you buy the compiler you are entitled to lifetime free upgrades. Upgrading the compiler takes only a few minutes and a few Click Board™s. We are constantly adding new features to the compiler, you can keep track of what is happening on the Software.\u003c\/p\u003e\u003cp\u003eOur support team is always available you can rely on our help while you are developing. The compiler license guarantees free product lifetime technical support.\u003c\/p\u003e\u003ch2\u003e1200 Library Functions\u003c\/h2\u003e\u003cp\u003emikroPascal offers a unique mechanism to easily use libraries in your project, just select the libraries you need and they will be instantly available in your code. No need for dozens of #include directives. You can also install and manage third-party libraries using our package manager and library manager.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-8051-library-functions.jpg\" alt=\"MikroPascal PRO for 8051 - Library Functions\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003cp\u003eSimply select the libraries you need for your project, by checking the box. Or press the Check Allbutton to include them all.\u003c\/p\u003e\u003cp\u003eWith more than 1200 library functions youll save time, effort and youll write better code.\u003cbr\u003eVisit LibStock and download fully functional and working projects, and install them with a single Click Board™.\u003c\/p\u003e\u003ch2\u003e104 Examples\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-8051-examples.jpg\" alt=\"MikroPascal PRO for 8051 - 104 Worked Examples\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003cp\u003eEvery single library that is in our compiler is covered by a working example. More than 104 ready-made working examples, to help you understand how the library works or give you useful code snippets for your project.\u003c\/p\u003e\u003ch2\u003e202 Supported MCUs\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003emikroPascal PRO for 8051\u003c\/strong\u003e currently supports 202 MCUs for 8051 and we are constantly adding new ones.\u003cbr\u003eYou can be part of the process by letting us know what microcontroller you wish to see supported next, by using our helpdesk and submitting a ticket.\u003c\/p\u003e\u003ch2\u003eIntegrated Development Environment (IDE)\u003c\/h2\u003e\u003cp\u003eThe ideal environment for you to write, compile, execute, and debug your code. All the tools you could think of, and more, are there. The Library Manager, Interrupt Assistant, Project Explorer, Quick Converter and more.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-8051-ide.jpg\" alt=\"MikroPascal PRO for 8051 IDE\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003ch2\u003eThe Perfect Toolbox\u003c\/h2\u003e\u003cp\u003emikroPascal comes equipped with fully-functional software tools that can boost your efficiency and do the job for you, so you can be more productive in your work: LCD Custom Character Tool, GLCD Bitmap Editor, Seven Segment Editor, UART Terminal, UDP Terminal, HID Terminal, ASCII Chart, Active Comments Editor, Interrupt Assistant, Advanced Statistics and much, much more.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-8051-toolbox.jpg\" alt=\"MikroPascal PRO for 8051 Toolbox\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003ch2\u003eComprehensive Documentation\u003c\/h2\u003e\u003cp\u003eThe help file is the best place to start if you want to get to know the compiler. The easy-to-read format and detailed explanations of every functionality and feature will make you an expert in no time.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-8051-documentation.jpg\" alt=\"MikroPascal PRO for 8051 Comprehensive Documentation\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40994856599741,"sku":"MIKROE-740","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40994856632509,"sku":"MIKROE-1455","price":349.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikropascal-pro-for-8051-usb-dongle-29795878109373.jpg?v=1685022584"},{"product_id":"mikropascal-pro-arm-pascal-compiler-uk","title":"mikroPascal PRO for ARM","description":"\u003cp\u003eMikroPascal PRO for ARM compiler with USB Dongle Licence.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40994860499133,"sku":"MIKROE-932","price":419.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40994860531901,"sku":"MIKROE-1965","price":399.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikropascal-pro-for-arm-usb-dongle-30156242092221.jpg?v=1685188186"},{"product_id":"mikropascal-pro-atmel-avr-pascal-compiler-uk","title":"mikroPascal PRO for AVR","description":"\u003cp\u003eMikroPascal PRO for AVR compiler with USB Dongle Licence.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40994880520381,"sku":"MIKROE-742","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40994880553149,"sku":"MIKROE-1959","price":349.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikropascal-pro-for-avr-usb-dongle-30240331661501.jpg?v=1685022423"},{"product_id":"mikropascal-pro-pic-pascal-compiler-uk","title":"mikroPascal PRO for PIC","description":"\u003ch1\u003eYou will love mikroPascal!\u003c\/h1\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pic.jpg\" alt=\"MikroPascal for PIC\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003ch2\u003eOne-Time Payment, Lifetime Licence\u003c\/h2\u003e\u003cp\u003ePay once and never worry about it again. Once you buy the compiler you are entitled to lifetime free upgrades. Upgrading the compiler takes only a few minutes and a few Click Board™s. We are constantly adding new features to the compiler, you can keep track of what is happening on the Software Roadmap page.\u003c\/p\u003e\u003cp\u003eOur support team is always available you can rely on our help while you are developing. The compiler license guarantees free product lifetime technical support from MikroElektronika.\u003c\/p\u003e\u003ch2\u003e1000 Library Functions\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/Libstock.jpg\" alt=\"Libstock - Library Functions and Projects\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eMikroPascal offers a unique mechanism to easily use libraries in your project, just select the libraries you need and they will be instantly available in your code. No need for dozens of #include directives. You can also install and manage third-party libraries using our package manager and library manager.\u003c\/p\u003e\u003cp\u003eSimply select the libraries you need for your project, by checking the box. Or press the Check Allbutton to include them all.\u003c\/p\u003e\u003cp\u003eWith more than 1000 library functions youll save time, effort and youll write better code.\u003c\/p\u003e\u003cp\u003eVisit LibStock and download fully functional and working projects, and install them with a single Click Board™.\u003c\/p\u003e\u003ch2\u003e145 Examples\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/examples.jpg\" alt=\"Example Code\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eEvery single library that is in our compiler is covered by a working example. More than 145 ready-made working examples, to help you understand how the library works or give you useful code snippets for your project.\u003c\/p\u003e\u003ch2\u003e619 Supported MCUs\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/microchip.jpg\" alt=\"Support for 619 Microchip Devices\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eMikroPascal PRO for PIC currently supports 619 PIC and we are constantly adding new ones.\u003cbr\u003eYou can be part of the process by letting us know what microcontroller you wish to see supported next, by using our helpdesk and submitting a ticket.\u003c\/p\u003e\u003ch2\u003eCreate Amazing user Interfaces thanks to the Integrated Visual TFT\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/visual-tft-mikropascal-pic.jpg\" alt=\"Visual TFT - MikroPascal for PIC\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eThe integrated solution allows for a streamlined workflow. Drag and drop graphic elements while the compiler generates the code automatically in the background. Modify the generated code in the compiler and create event functions. Seamlessly switch between designing and coding using keyboard shortcut F12.\u003c\/p\u003e\u003cp\u003eTry it out for yourself and create fully functional GUIs with just a few Click Board™s. And dont worry about the code, the compiler will take care of that.\u003c\/p\u003e\u003cp\u003eTo enable Visual TFT, you need to acquire the Visual TFT license separately. That is why we prepared a 30% discount on the Visual TFT software if you purchase it with the compiler.\u003c\/p\u003e\u003cp\u003eVisual TFT supports 17 TFT controllers and five different display resolutions. So, we even have the hardware prepared for your next graphic project.\u003c\/p\u003e\u003ch2\u003eIDE\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/ide-mikropascal-pic.jpg\" alt=\"IDE - MikroPascal for PIC\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eThe ideal environment for you to write, compile, execute, and debug your code. All the tools you could think of, and more, are there. The Library Manager, Interrupt Assistant, Project Explorer, Quick Converter and more.\u003c\/p\u003e\u003ch2\u003eThe Perfect Toolbox\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/toolbox-mikropascal-pic.jpg\" alt=\"Toolbox - MikroPascal for PIC\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eMikroPascal comes equipped with fully-functional software tools that can boost your efficiency and do the job for you, so you can be more productive in your work: LCD Custom Character Tool, GLCD Bitmap Editor, Seven Segment Editor, UART Terminal, UDP Terminal, HID Terminal, ASCII Chart, Active Comments Editor, Interrupt Assistant, Advanced Statistics and much, much more.\u003c\/p\u003e\u003ch2\u003eHardware Debugging\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/debugging%20-%20mikropascal-pic.jpg\" alt=\"Hardware Debugging - MikroPascal for PIC\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eDetect and correct all the code errors in seconds. mikroPascal has native support for hardware debugging when used with the mikroProg in-circuit programmer and debugger. It supports Step-over, Step-into, Step-out, Run, and Run To Cursor debugging operations. Also, the debugger supports standard and advanced breakpoints, which enable you to exploit the full potential of hardware debugging.\u003c\/p\u003e\u003ch2\u003eComprehensive Documentation\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/documentation%20-%20MikroPascal%20for%20PICjpg.jpg\" alt=\"Comprehensive Documentation - MikroPascal for PIC\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eThe help file is the best place to start if you want to get to know the compiler. The easy-to-read format and detailed explanations of every functionality and feature will make you an expert in no time.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40994897494205,"sku":"MIKROE-746","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40994897559741,"sku":"MIKROE-1947","price":349.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikropascal-pro-for-pic-usb-dongle-29796041130173.jpg?v=1685112947"},{"product_id":"mikropascal-pro-pic32-pascal-compiler-uk","title":"mikroPascal PRO for PIC32","description":"\u003cp\u003emikroPascal PRO for PIC32 is a full-featured Pascal compiler for PIC32 devices.\u003c\/p\u003e\u003cp\u003eThe feature rich environment you can experience today is the result of 15 years of dedicated work and steady progress. The ever-increasing number of hardware and software libraries, intuitive IDE, integrated Visual TFT software, detailed documentation, a full box of additional tools.\u003c\/p\u003e\u003ch1\u003eYou will love MikroPascal!\u003c\/h1\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-pic32.jpg\" alt=\"MikroPascal PRO for PIC32\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003ch2\u003e1-TIME PAYMENT, LIFETIME LICENSE\u003c\/h2\u003e\u003cp\u003ePay once and never worry about it again. Once you buy the compiler you are entitled to lifetime free upgrades. Upgrading the compiler takes only a few minutes and a few Click Board™s. We are constantly adding new features to the compiler, you can keep track of what is happening on the Software Roadmap page.\u003c\/p\u003e\u003cp\u003eOur support team is always available you can rely on our help while you are developing. The compiler license guarantees free product lifetime technical support.\u003c\/p\u003e\u003ch2\u003e1200 Library Functions\u003c\/h2\u003e\u003cp\u003eMikroPascal offers a unique mechanism to easily use libraries in your project, just select the libraries you need and they will be instantly available in your code. No need for dozens of #include directives. You can also install and manage third-party libraries using our package manager and library manager.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-pic32-library-functions.jpg\" alt=\"MikroPascal PRO for PIC32 - 100 Library Functions\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eSimply select the libraries you need for your project, by checking the box. Or press the Check Allbutton to include them all.\u003c\/p\u003e\u003cp\u003eWith more than 1200 library functions youll save time, effort and youll write better code.\u003c\/p\u003e\u003cp\u003eVisit LibStock and download fully functional and working projects, and install them with a single Click Board™.\u003c\/p\u003e\u003ch2\u003e100 Examples\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-pic32-examples.jpg\" alt=\"100 Examples\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eEvery single library that is in our compiler is covered by a working example. More than 100 ready-made working examples, to help you understand how the library works or give you useful code snippets for your project.\u003c\/p\u003e\u003ch2\u003e187 Supported MCU Devices\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/microchip.jpg\" alt=\"Microchip\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eThe mikroPascal PRO for PIC32 currently supports 187 PIC32 and we are constantly adding new ones.\u003c\/p\u003e\u003ch2\u003eIntegrated Visual TFT\u003c\/h2\u003e\u003cp\u003eCreate amazing user interfaces thanks to the integrated Visual TFT.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-pic32-visual-tft.jpg\" alt=\"MikroPascal PRO for PIC32 - Built-in Visual TFT\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eThe integrated solution allows for a streamlined workflow. Drag and drop graphic elements while the compiler generates the code automatically in the background. Modify the generated code in the compiler and create event functions. Seamlessly switch between designing and coding using keyboard shortcut F12.\u003c\/p\u003e\u003cp\u003eTry it out for yourself and create fully functional GUIs with just a few Click Board™s. And dont worry about the code, the compiler will take care of that.\u003c\/p\u003e\u003cp\u003eTo enable Visual TFT, you need to acquire the Visual TFT license separately. That is why we prepared a 30% discount on the Visual TFT software if you purchase it with the compiler.\u003c\/p\u003e\u003cp\u003eVisual TFT supports 17 TFT controllers and multiple different display resolutions. So, we even have the hardware prepared for your next graphic project.\u003c\/p\u003e\u003ch2\u003eIDE\u003c\/h2\u003e\u003cp\u003eThe ideal environment for you to write, compile, execute, and debug your code. All the tools you could think of, and more, are there. The Library Manager, Interrupt Assistant, Project Explorer, Quick Converter and more.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-pic32-ide.jpg\" alt=\"MikroPascal PRO for PIC32 - IDE\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003ch2\u003eThe Perfect Toolbox\u003c\/h2\u003e\u003cp\u003emikroPascal comes equipped with fully-functional software tools that can boost your efficiency and do the job for you, so you can be more productive in your work: LCD Custom Character Tool, GLCD Bitmap Editor, Seven Segment Editor, UART Terminal, UDP Terminal, HID Terminal, ASCII Chart, Active Comments Editor, Interrupt Assistant, Advanced Statistics and much, much more.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-pic32-toolbox.jpg\" alt=\"MikroPascal PRO for PIC32- Toolbox\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003ch2\u003eHardware Debugging\u003c\/h2\u003e\u003cp\u003eDetect and correct all the code errors in seconds. mikroPascal has native support for hardware debugging when used with the mikroProg in-circuit programmer and debugger. It supports..\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStep-over\u003c\/li\u003e\n\u003cli\u003eStep-into\u003c\/li\u003e\n\u003cli\u003eStep-out\u003c\/li\u003e\n\u003cli\u003eRun\u003c\/li\u003e\n\u003cli\u003eRun To Cursor debugging operations\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-pic32-debugging.jpg\" alt=\"MikroPascal PRO for PIC32 - Hardware Debugging\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e\u003cp\u003eAlso, the debugger supports standard breakpoints, which enable you to exploit the full potential of hardware debugging.\u003c\/p\u003e\u003ch2\u003eComprehensive Documentation\u003c\/h2\u003e\u003cp\u003eThe help file is the best place to start if you want to get to know the compiler. The easy-to-read format and detailed explanations of every functionality and feature will make you an expert in no time.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikropascal-pro-pic32-documentation.jpg\" alt=\"MikroPascal PRO for PIC32 - Comprehensive Documentation\" class=\"fr-fic fr-dib\"\u003e .\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40994902180029,"sku":"MIKROE-748","price":419.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40994902212797,"sku":"MIKROE-1935","price":399.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikropascal-pro-for-pic32-usb-dongle-29036258623677.jpg?v=1685132204"},{"product_id":"mikrobasic-pro-8051-basic-compiler-uk","title":"mikroBasic PRO for 8051","description":"\u003cp\u003eMikroBasic PRO for 8051 - USB Dongle Licence.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40994782412989,"sku":"MIKROE-720","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40994782445757,"sku":"MIKROE-1453","price":349.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikrobasic-pro-for-8051-usb-dongle-29795706831037.jpg?v=1685107184"},{"product_id":"mikroe-mikrobasic-pro-arm-basic-compiler-uk","title":"mikroBasic PRO for ARM","description":"\u003cp\u003e\u003cimg alt=\"Library manager Libstock\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikrobasic\/arm\/highlights\/arm-basic-lifetime-license-overview-img.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eYou will love mikroBasic!\u003c\/h2\u003e\n\n\u003ch2\u003eOne-Time Payment, Lifetime Licence\u003c\/h2\u003e\n\n\u003cp\u003ePay once and never worry about it again. Once you buy the compiler, you are entitled to lifetime free upgrades. Upgrading the compiler takes only a few minutes and a few Click Board™s. We are constantly adding new features to the compiler, you can keep track of what is happening on the software Roadmap page.\u003c\/p\u003e\n\n\u003cp\u003eOur support team is always available – you can rely on our help while you are developing. The compiler license guarantees free product lifetime technical support.\u003c\/p\u003e\n\n\u003ch2\u003e1200 Library Functions\u003c\/h2\u003e\n\n\u003cp\u003emikroBasic offers a unique mechanism to easily use libraries in your project; just select the libraries you need, and they will be instantly available in your code. No need for dozens of #include directives. You can also install and manage third-party libraries using our package manager and library manager.\u003c\/p\u003e\n\n\u003cp\u003eSimply select the libraries you need for your project, by checking the box. Or press the\u003ci\u003e\"Check All\" \u003c\/i\u003ebutton to include them all.\u003c\/p\u003e\n\n\u003cp\u003eWith more than 1200 library functions, you'll save time, and effort and write better code.\u003c\/p\u003e\n\n\u003cp\u003eVisitLibStockand download fully functional and working projects and install them with a single Click Board™.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Library manager Libstock\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/arm\/highilghts\/1200-libs-img.jpg\"\u003e\u003cimg alt=\"Library manager Libstock\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/arm\/highilghts\/400-examples-img.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003e410 Examples\u003c\/h2\u003e\n\n\u003cp\u003eA working example covers every single library that is in our compiler. More than 400 ready-made working examples to help you understand how the library works or give you helpful code snippets for your project.\u003c\/p\u003e\n\n\u003ch2\u003e1312 Supported MCUs\u003c\/h2\u003e\n\n\u003cp\u003eThe mikroBasic PRO for ARM\u003csup\u003e®\u003c\/sup\u003ecurrently supports over 1312 ARM\u003csup\u003e®\u003c\/sup\u003eCortex-M0\u003csup\u003e®\u003c\/sup\u003e, M0+, M3, M4,and M7 microcontrollers from leading manufacturers, and we are constantly adding new ones.\u003c\/p\u003e\n\n\u003cp\u003eYou can be part of the process by letting us know what microcontroller you wish to see supported next, by using our helpdesk and submitting a ticket.\u003c\/p\u003e\n\n\u003ch3\u003e\n\u003cimg alt=\"NXP\" data-entity-type=\"\" data-entity-uuid=\"\" name=\"NXP\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/NXP-color-long.jpg\"\u003e\u003cimg alt=\"Microchip\" data-entity-type=\"\" data-entity-uuid=\"\" name=\"Microchip\" src=\"https:\/\/cdn2.mikroe.com\/img\/2016\/11\/23154718\/microchip-tech-logo.jpg\"\u003e\u003cimg alt=\"STMicroelectronics\" data-entity-type=\"\" data-entity-uuid=\"\" name=\"STMicroelectronics\" src=\"https:\/\/cdn2.mikroe.com\/img\/2016\/11\/23155635\/st-logo.jpg\"\u003e\u003cimg alt=\"Texas Instruments\" data-entity-type=\"\" data-entity-uuid=\"\" name=\"Texas Instruments\" src=\"https:\/\/cdn2.mikroe.com\/img\/2016\/11\/23155252\/texas-instruments-logo.jpg\"\u003e\n\u003c\/h3\u003e\n\n\u003ch3\u003eCreate Fantastic User Interfaces - thanks to the integrated Visual TFT\u003c\/h3\u003e\n\n\u003cp\u003eThe integrated solution allows for a streamlined workflow. Drag and drop graphic elements while the compiler generates the code automatically in the background. Modify the generated code in the compiler and create event functions. Seamlessly switch between designing and coding using keyboard shortcut F12.\u003c\/p\u003e\n\n\u003cp\u003eTry it out yourself and create fully functional GUIs with just a few Click Board™s. And don't worry about the code; the compiler will take care of that.\u003c\/p\u003e\n\n\u003cp\u003eVisual TFT supports 17 TFT controllers and multiple display resolutions. So, we even have the hardware prepared for your next graphic project.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"VisualTFT Software\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/arm\/highilghts\/mikroc-arm-vtft-overview.jpg\"\u003e\u003cimg alt=\"Basic ide overview\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikrobasic\/arm\/highlights\/arm-basic-ide-overview-img.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eIDE\u003c\/h2\u003e\n\n\u003cp\u003eThe ideal environment is for writing, compiling, executing, and debugging your code. All the tools you could think of, and more, are there. the library Manager, Interrupt Assistant, Project Explorer, Quick Converter and more.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"IDE\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikroc\/arm\/highilghts\/ide-main-overview-img-22.png\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eThe Perfect Toolbox\u003c\/h2\u003e\n\n\u003cp\u003emikroBasic comes equipped with fully-functional software tools that can boost your efficiency and do the job for you, so you can be more productive in your work: LCD Custom Character Tool, GLCD Bitmap Editor, Seven Segment Editor, UART Terminal, UDP Terminal, HID Terminal, ASCII Chart, Active Comments Editor, Interrupt Assistant, Advanced Statistics and much, much more.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Comprehensive help file\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikrobasic\/arm\/highlights\/arm-basic-toolbox-overview-img.jpg\"\u003e\u003cimg alt=\"VisualTFT Software\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikrobasic\/arm\/highlights\/arm-basic-debug-tools-overview-img.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eHardware Debugging\u003c\/h2\u003e\n\n\u003cp\u003eDetect and correct all the code errors in seconds. mikroBasic has native support for hardware debugging when used with the mikroProg in-circuit programmer and debugger. It supports Step-over, Step-into, Step-out, Run, and Run To Cursor debugging operations. Also, the debugger supports standard breakpoints, which enable you to exploit the full potential of hardware debugging.\u003c\/p\u003e\n\n\u003ch2\u003eComprehensive Documentation\u003c\/h2\u003e\n\n\u003cp\u003eThe help file is the best place to start if you want to get to know the compiler. The easy-to-read format and detailed explanations of every functionality and feature will make you an expert.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Comprehensive help file\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikrobasic\/arm\/highlights\/arm-basic-help-docs-overview-img.jpg\"\u003e\u003cimg alt=\"VisualTFT Software\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/compilers\/mikrobasic\/arm\/highlights\/arm-basic-license-options-overview-img.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFlexible Licensing Options\u003c\/h2\u003e\n\n\u003ch4\u003eLICENSE CODE\u003c\/h4\u003e\n\n\u003cp\u003eBuy the compiler, and the License Code will be sent to your inbox instantly. Once you activate the license, you can use it on up to two computers.\u003c\/p\u003e\n\n\u003ch4\u003eUSB DONGLE\u003c\/h4\u003e\n\n\u003cp\u003eDo you need a portable license that can be used on multiple computers? USB Dongle license is the perfect solution.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40994826617021,"sku":"MIKROE-928","price":419.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40994826649789,"sku":"MIKROE-1963","price":399.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikrobasic-pro-for-arm-usb-dongle-30156228952253.jpg?v=1685067048"},{"product_id":"mikrobasic-pro-atmel-avr-basic-compiler-uk","title":"mikroBasic PRO for AVR","description":"\u003cp\u003eMikroBasic PRO for AVR compiler with USB Dongle Licence.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40994815049917,"sku":"MIKROE-722","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40994815082685,"sku":"MIKROE-1957","price":349.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikrobasic-pro-for-avr-usb-dongle-29035865145533.jpg?v=1685107190"},{"product_id":"mikrobasic-pro-pic-basic-compiler-uk","title":"mikroBasic PRO for PIC","description":"\u003cp\u003eMikroBasic PRO for PIC compiler with USB Dongle Licence.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB Dongle","offer_id":40994803417277,"sku":"MIKROE-726","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Code Licence","offer_id":40994803450045,"sku":"MIKROE-1945","price":349.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-compiler-mikrobasic-pro-for-pic-usb-dongle-29795765977277.jpg?v=1685138694"},{"product_id":"mikroe-1303-mikroprog-to-st-link-v2-adapter-uk","title":"MikroProg to ST-Link v2 Adapter","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg to ST-Link v2 Adapter\u003c\/strong\u003e allows you to connect mikroProg for STM32 programmer and hardware debugger to 20-pin male JTAG connector on your target board. The Adapter consists of one 2x10 male header and a 2x10 female socket. Its recommended to first place the adapter on 2x10 male header on the target board, and then plug in the mikroProg into the adapters 2x5 male header.\u003c\/p\u003e\n\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eAdapter\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eAdapter allows you to connect mikroProg for STM32 programmer and hardware debugger to 20-pin male JTAG connector on your target board\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003e2x10 male header and a 2x10 female socket\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eGPIO\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003eIDC10\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768337948861,"sku":"MIKROE-1303","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-adapter-mikroprog-to-st-link-v2-adapter-30237431660733.jpg?v=1685033743"},{"product_id":"lipowsky-baby-lin-rc-ii-lin-bus-adapter-uk","title":"Lipowsky Baby-LIN-RC-II LIN Bus Simulator","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSupports LIN-bus versions 1.2, 1.3, 2.0, 2.1 and 2.2.\u003c\/li\u003e\n\t\u003cli\u003eBaby-LIN-RC-II offers all features of the standard\u0026gt;Baby-LIN-II.\u003c\/li\u003e\n\t\u003cli\u003eCan be used as stand-alone remote control for LIN-bus.\u003c\/li\u003e\n\t\u003cli\u003eIn addition, a freely programmable membrane keypad with 6 keys is integrated.\u003c\/li\u003e\n\t\u003cli\u003eThrough optional shift functions (F5\/F6) it is possible to program up to 12 virtual keys.\u003c\/li\u003e\n\t\u003cli\u003eAny LIN-command can be assigned to the individual keys.\u003c\/li\u003e\n\t\u003cli\u003eStarting from an LDF (LIN Description File), it just takes a few minutes to realize a complete manual control unit for your LIN-bus.\u003c\/li\u003e\n\t\u003cli\u003eSimulates your LIN-master and if applicable additional LIN-slaves (system simulation).\u003c\/li\u003e\n\t\u003cli\u003ePerfect for demonstration, test applications, service and all other situations, where LIN-devices have to be handled manually.\u003c\/li\u003e\n\t\u003cli\u003eThe device supports the expanded SDF-V3 format.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eSoftware compatibility\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eWindows XP\u003c\/li\u003e\n\t\u003cli\u003eWindows Vista\u003c\/li\u003e\n\t\u003cli\u003eWindows 7 (32\/64 Bit)\u003c\/li\u003e\n\t\u003cli\u003eWindows 8 (32\/64 Bit)\u003c\/li\u003e\n\t\u003cli\u003eWindows 10 (32\/64 Bit)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lipowsky Industrie Elektronik GmbH","offers":[{"title":"Default Title","offer_id":37768362852541,"sku":"8000995\/8","price":690.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lipowsky-industrie-elektronik-gmbh-pc-interface-lipowsky-baby-lin-rc-ii-lin-bus-adapter-29194691772605.jpg?v=1685096024"},{"product_id":"mikroe-2002-mikroprog-for-cec1302-uk","title":"MikroProg for CEC1302","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg for CEC\u003c\/strong\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support the CEC cryptographic engine with secure firmware updating. Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika ARM compilers (mikroC, mikroBasic and mikroPascal).\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikroprog-8051.jpg\" alt=\"MikroProg for CEC Debugger\/Programmer\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003cp\u003eThis mikroProg supports the CEC1302 and CEC1702(+EFUSE) microcontrollers from Microchip.\u003c\/p\u003e\u003ch2\u003eSingleClick Board™Debugging\u003c\/h2\u003e\u003cp\u003emikroProghas native support for hardware step-by-step Debugging. debugger is a separate DLL module in mikroElektronika ARM\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768364687549,"sku":"MIKROE-2002","price":104.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-cec-36570029195487.jpg?v=1684955818"},{"product_id":"total-phase-tp320310-extension-cable-for-beagle-usb-12-6","title":"Total Phase TP320310 Extension Cable for Beagle USB 12 6\"","description":"\u003cp\u003eConnect USB devices with captive USB-A connectors quickly and easily to the Beagle USB 12 Protocol Analyzer or the Beagle USB 480 Protocol Analyzer with the USB Extension Cable.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768365637821,"sku":"TP320310","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-extension-cable-for-beagle-usb-12-6-28938487038141.jpg?v=1685098553"},{"product_id":"mikroe-2331-mikroprog-kinetis-uk","title":"MikroProg for Kinetis","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003emikroProg for Kinetis\u003c\/strong\u003e\u003c\/em\u003e is a fast programmer and hardware debugger for NXP's ARM Cortex™-M microcontrollers from the Kinetis family. Outstanding performance, easy operation, elegant design and low price are its top features. \u003cstrong\u003emikroProg for Kinetis\u003c\/strong\u003e is fully supported in MikroElektronika ARM compilers (mikroC, mikroPascal, and mikroBasic).\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for Kinetis connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003emikroProg™ for Kinetis\u003c\/strong\u003e is supported with MikroElektronika mikroC™, mikroBasic™ and mikroPascal™ compilers for ARM® microcontrollers.\u003c\/p\u003e\n\n\u003ch3\u003eSingleClick™ Debugging\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ has native support for hardware step-by-step Debugging. debugger is a separate DLL module in mikroElektronika ARM® compilers which supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6], Run To Cursor[F4] debugging operations. Also, debugger supports standard and advanced breakpoints, which enable you to exploit the full potential of fast debugging.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programmer cable and created a holder to tie it firmly into place\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003emikroProg programmer requires special programming software called mikroProg Suite for ARM. This software is used for programming all supported Kinetis microcontrollers. The software has an intuitive interface and uses SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003ch3\u003eThe package Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003emikroProg™ for Kinetis\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768370127037,"sku":"MIKROE-2331","price":104.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-kinetis-36569989480671.jpg?v=1684955824"},{"product_id":"lipowsky-8001054-baby-lin-ii-lin-bus-simulator-uk","title":"Lipowsky Baby-LIN-II LIN Bus Simulator","description":"\u003cp\u003eThe \u003cstrong\u003eLipowsky Baby-LIN-II\u003c\/strong\u003e is a compact and cost-effective way to control LIN-Bus equipped devices with the help of a USB port of a standard computer. This controller features an integrated 32-bit microcontroller that is responsible for important tasks like LIN-bus protocol decoding and message scheduling. It comes with the LINWorks software suite that contains application programs, which along with a DLL, allows you to access the LIN-Bus of the controller. The LIN-Bus can also be accessed directly by the DLL-API that is easy to use and allows you to fetch or put frames, respective signals to the \u003cstrong\u003eLIN-Bus\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eOne of the most unique features of \u003cstrong\u003eBaby-LIN\u003c\/strong\u003e is that it can be powered either the USB port or from the LIN-Bus, allowing it to be as a standalone device, without a computer. The macro feature of this LIN-Bus allows it to store commands sequences, which can be later used for various tasks like, running an endless loop of tests on a LIN-equipped ECU.\u003c\/p\u003e\n\n\u003cp\u003eThe voltage provided at the LIN-Bus side can vary between 9 volts to 36 volts, and since the LIN-bus is isolated from the USB side, there are no electrical interference between the computer and on board electronics of the controller. The flash-based firmware storage of the Baby-LIN allows easy updates and changes of the LIN-bus specifications.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eLINWorks software\u003c\/strong\u003e suite that comes along with the Baby-LIN features various application programs. The \u003cstrong\u003eLDF-Editor\u003c\/strong\u003e allows you to create, inspect, and edit \u003cstrong\u003eLDF\u003c\/strong\u003es. The Session Configurator allows you to define additional session parameters, like choosing which nodes should be available and which nodes should be simulated. It allows the Baby-LIN to play the role of both, master and slave nodes. The \u003cstrong\u003eLIN-Bus\u003c\/strong\u003e can also work without any slave nodes, simulating all nodes at the same time.\u003c\/p\u003e","brand":"Lipowsky Industrie Elektronik GmbH","offers":[{"title":"Default Title","offer_id":37768370880701,"sku":"8001054","price":550.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lipowsky-industrie-elektronik-gmbh-pc-adapter-lipowsky-baby-lin-ii-lin-bus-adapter-30244858396861.jpg?v=1685015207"},{"product_id":"total-phase-tp500110-promira-serial-platform-uk","title":"Total Phase PROMIRA Platform","description":"\u003cp\u003eBuilt on a completely new FPGA-based architecture, the Promira platform is the latest tool in Total Phase's established line of cost-effective and easy-to-use embedded solutions. Instantly add new features to your device, as they become available: program and receive data with new protocols, higher clock rates and real-time protocol analysis.\u003c\/p\u003e\n\u003cp\u003eEach Promira platform includes a full software suite including powerful GUIs and APIs for a variety of applications.\u003c\/p\u003e\n\u003cp\u003eEvery Promira platform comes standard with integrated level-shifting, as well as Ethernet and USB control interfaces. The Promira platform is ready to accomplish any task you set it to.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"fr-video fr-fvc fr-dvi fr-draggable\"\u003e\u003ciframe class=\"fr-draggable\" src=\"https:\/\/www.youtube.com\/embed\/4n5d4cEmg1w\" style=\"width: 500px; height: 281px;\" teidentifier=\"iqo6kpu1b5bmou5izp9\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHere are some typical applications of the PROMIRA:\u003c\/p\u003e\n\u003ch3\u003eDevelopment Prototyping\u003c\/h3\u003e\n\u003cp\u003eThe Promira can be configured as a bus master or slave. As a master, it can be used to connect to sensors, memory devices and other peripherals. As a slave, it can be used to emulate a serial device and respond to test commands sent by a master CPU.\u003c\/p\u003e\n\u003ch3\u003eDevice Programming\u003c\/h3\u003e\n\u003cp\u003eThe unit can be used to program EEPROM and Flash devices on a target board in the laboratory.\u003c\/p\u003e\n\u003cp\u003eThe Promira is also ideal for production programming. Using its inbuilt Ethernet interface, the unit can be controlled away from the production floor using its API. This gives greater flexibility than the usual USB interface.\u003c\/p\u003e\n\u003ch3\u003eProduction Testing\u003c\/h3\u003e\n\u003cp\u003eIn addition to being able to program a blank memory device in production, the Promira can also be used to perform regression tests on the programmed device, ensuring the quality of your manufactured device.\u003c\/p\u003e\n\u003ch3\u003eHow Do I Buy a Promira?\u003c\/h3\u003e\n\u003cp\u003eThe Promira serial platform can be configured to run a range of Applications. You simply choose which application, or applications you need when ordering. At least one application must be chosen. Other applications can be purchased when you need them. This makes the Prpmira a great investment as you only pay for applications that you need, saving you money! .\u003c\/p\u003e\n\u003cp\u003eCurrently, the following applications are available, with more being developed all the time: .\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eI2C Active - Level 1 Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eAn essential I2C interface with programming speeds are twice as fast as the Aardvark I2C\/SPI Host Adapter. Featuring support for the I2C fast mode plus specification, the Promira platform equipped with the I2C Active - Level 1 Application provides high speed I2C programming, high performance debugging, and superior emulation for your I2C protocol needs.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eI2C Active - Level 2 Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eFeatures I2C programming speeds up to 3.4 MHz for Master and Slave. Featuring support for the I2C High Speed Mode specification, the Promira platform equipped with the I2C Active - Level 2 Application provides high speed I2C programming, high performance debugging, and superior emulation for your I2C protocol needs.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSPI Active - Level 1 Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eSPI programming speeds are over eight times faster than the Aardvark I2C\/SPI Host Adapter. Supporting clock speeds of up to 12.5 MHz for master and 8 MHz for slave functionality, the PROMIRA platform equipped with the SPI Active - Level 1 Application provides fast programming, ultra-high performance debugging and superior emulation for your SPI protocol needs.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSPI Active - Level 2 Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eSPI programming speeds are even faster than the Level 1 application - supporting clock speeds of up to 40 MHz for master and 20 MHz for slave functionality, the Promira platform equipped with the SPI Active - Level 2 Application provides fast programming, ultra-high performance debugging and superior emulation for your SPI protocol needs.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSPI Active - Level 3 Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eSPI programming speeds are even faster - supporting clock speeds of up to 80 MHz for master and 20 MHz for slave functionality, the Promira platform equipped with the SPI Active - Level 3 Application provides fast programming, ultra-high performance debugging and superior emulation for your SPI protocol needs. The eSPI®Active Example files also show you how to use your SPI Active licensed Promira Serial Platform to act as a master for the eSPI®protocol.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eeSPI®Analysis Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eMonitor the communication between a master and slave on accross the data lines, 5 channels (peripheral, virtual wire, OOB, Flash, Independent), 2 alert lines, 2 reset lines and more. The eSPI®Active Example files also show you how to use your SPI Active licensed Promira Serial Platform to act as a master for the eSPI®protocol.\u003c\/p\u003e\n\u003ch3\u003eIntegrated Capabilities\u003c\/h3\u003e\n\u003cp\u003eGigabit Ethernet and High-Speed USB connectivity to analysis PC included\" Signaling voltage from 0.9 V- 3.3 V, 5V fault tolerant\" Power your project with up to 200 mA supplemental power - 100 mA at 5 V, 100 mA available from 0.9 V- 3.3 V.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":55551942492535,"sku":"TP500110","price":1040.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-total-phase-promira-serial-platform-tp500110-72356892967287.png?v=1732757880"},{"product_id":"mikoprog-msp432-mikroe-2511-uk","title":"MikroProg for MSP432","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg for MSP432\u003c\/strong\u003e is a fast and reliable USB programmer and hardware debugger. This mikroProg supports the SimpleLink MSP432 microcontroller family from Texas Instruments. .\u003c\/p\u003e\u003ch2\u003eCompiler Compatibility\u003c\/h2\u003e\u003cp\u003emikroProg for MSP432 is supported with mikroC, mikroBasic and mikroPascal compilers for ARM.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768397095101,"sku":"MIKROE-2511","price":104.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-msp432-36570008420575.jpg?v=1684955821"},{"product_id":"mikroe-codegrip-for-arm-programmer-debugger-uk","title":"CODEGRIP for ARM","description":"\u003ch2\u003eWORLD'S FIRST DEBUGGER OVER WiFi\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip front debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDebugging and programming over WiFi\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP for ARM is first-ever embedded programmer \u0026amp; debugger over WiFi. Enjoy cable-free world!\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n*CODEGRIP WiFi License is available as an add-on feature.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip side debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAccess anywhere, under any circumstances at anytime\u003c\/h3\u003e\n\n\u003cp\u003eUnlimited possibilities for development, you can place the CODEGRIP for ARM programmer \u0026amp; debugger in almost any hardly accessible places such as hazardous environment, agricultural setting, and high-rise buildings while still retaining full debugging and programming access.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip back debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-back.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-back.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eRedefine technical support\u003c\/h3\u003e\n\n\u003cp\u003eReplicating user's hardware has always been a challenge, debugging trough WiFi enables technical support to directly access user's hardware.\u003cbr\u003e\nDo more with less effort!\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP programmer \u0026amp; debugger, please read the CODEGRIP Manual.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Programmer and debugger CODEGRIP arm v8 legend\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-in-position-and-legend.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-in-position-and-legend.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCODEGRIP SUITE\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot1\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot1.png\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot1.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCODEGRIP Suite\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP Suite is a powerful software tool. It is used to intelligently manage programming tasks, as well as various other options and settings of the CODEGRIP.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot2\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot2.png\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot2.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eEffortless programming with complete control over MCU's\u003c\/h3\u003e\n\n\u003cp\u003eWireless connectivity and USB-C connector allow seamless and effortless programming of a huge number of various ARM® Cortex-M based microcontrollers, providing users with both the mobility and the complete control over the microcontroller programming and debugging process.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot3\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot3.png\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot3.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePlug and play\u003c\/h3\u003e\n\n\u003cp\u003eUSB-C debugger enables effortless programming\/debugging over generic USB driver connection without the need for additional driver support.\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP Suite and module, please read the CODEGRIP Manual.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB-C","offer_id":43331307536607,"sku":"MIKROE-5273","price":174.3,"currency_code":"GBP","in_stock":true},{"title":"USB-C and WiFi","offer_id":43331307569375,"sku":"MIKROE-3460","price":209.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-usb-c-and-wifi-codegrip-for-arm-38006674161887.jpg?v=1684977052"},{"product_id":"mikroe-codegrip-for-ti-tiva-programmer-debugger-uk","title":"CODEGRIP for Tiva","description":"\u003cp\u003eCODEGRIP for TI Tiva™ is the first Programmer \/ Debugger for ARM Cortex with a WiFi or USB-C interface. It supports all STM32 ARM Cortex-M based MCUs.\u003c\/p\u003e\n\n\u003cp\u003eNow you can debug and program your target board remotely. This is ideal if your target board is located in an inaccessible place such as a hazardous environment, in an agricultural setting or high-rise building.\u003c\/p\u003e\n\n\u003cp\u003eDo more, safely, and with less effort!\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB-C","offer_id":43425214595295,"sku":"MIKROE-5281","price":139.3,"currency_code":"GBP","in_stock":true},{"title":"USB-C and WiFi","offer_id":43425214628063,"sku":"MIKROE-3463","price":160.3,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-codegrip-for-tiva-28869587665085.jpg?v=1685162102"},{"product_id":"mikroe-codegrip-for-nxp-kinetis-uk","title":"CODEGRIP for Kinetis","description":"\u003ch2\u003eUniversal Programmer and Debugger for Kinetis over USB-C and WiFi\u003c\/h2\u003e\n\n\u003ch3\u003eTHE WORLD'S FIRST DEBUGGER OVER WIFI\u003c\/h3\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip front debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDebugging and Programming Over WiFi\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP is the first-ever embedded programmer \u0026amp; debugger over WiFi. Enjoy a cable-free world!\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n*CODEGRIP WiFi License is available as an add-on feature. \u003cimg alt=\"codegrip side debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAccess Anywhere, Under Any Circumstance, Anytime\u003c\/h3\u003e\n\n\u003cp\u003eUnlimited possibilities for development, you can place the CODEGRIP programmer \u0026amp; debugger in almost any hardly accessible places such as hazardous environments, agricultural settings, and high-rise buildings while still retaining full debugging and programming access.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip back debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-back-kinetis.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eRedefines Technical Support\u003c\/h3\u003e\n\n\u003cp\u003eReplicating users' hardware has always been a challenge, debugging through WiFi enables technical support to directly access users' hardware.\u003cbr\u003e\nDo more with less effort!\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP programmer \u0026amp; debugger, please read the CODEGRIP Manual.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Programmer and debugger CODEGRIP arm v8 legend\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-in-position-and-legend.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCODEGRIP SUITE\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot1\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot1.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCODEGRIP Suite\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP Suite is a powerful software tool. It is used to intelligently manage programming tasks, as well as various other options and settings of the CODEGRIP.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot2\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot2.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eEffortless Programming with Complete MCU Control\u003c\/h3\u003e\n\n\u003cp\u003eWireless connectivity and USB-C connector allow seamless and effortless programming of a huge number of various Kinetis-based microcontrollers, providing users with both mobility and complete control over the microcontroller programming and debugging process.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot3\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot3.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePlug and Play\u003c\/h3\u003e\n\n\u003cp\u003eUSB-C debugger enables effortless programming\/debugging over generic USB driver connection without the need for additional driver support.\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP Suite and module, please read the CODEGRIP Manual.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"no","offer_id":43391496978655,"sku":"MIKROE-5280","price":139.3,"currency_code":"GBP","in_stock":true},{"title":"Yes","offer_id":43391497011423,"sku":"MIKROE-3462","price":160.3,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-codegrip-for-kinetis-28869578621117.jpg?v=1685162453"},{"product_id":"lipowsky-baby-lin-rm-iii-can-lin-bus-adapter-uk","title":"Lipowsky Baby-LIN-RM-III CAN\/LIN Bus Simulator","description":"\u003cp\u003eThe \u003cstrong\u003eBaby-LIN-RM-III\u003c\/strong\u003e is a controller that can be used to control LIN or CAN interface using a standard computer. This device comes with an integrated 32-bit microcontroller that can perform all time-critical operations.\u003c\/p\u003e\n\n\u003ch2\u003eLINWorks V2 Software\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBaby-LIN-RM-III\u003c\/strong\u003e includes the easy-to-use LINWorks V2 software suite.\u003c\/p\u003e\n\n\u003cp\u003eBased on LDF or DBC files configurations can be set up within minutes. Each configuration can define which nodes from the bus will be simulated by the \u003cstrong\u003eBaby-LIN-RM-III\u003c\/strong\u003e (restbus simulation) or how a change of state at the digital inputs will change bus signals or trigger a macro. Via the digital inputs PWM signals can be read, scaled and mapped to bus signals.\u003c\/p\u003e\n\n\u003cp\u003eSignal values can be read can be read and written in real-time while other operations are in progress. This can be done via a Simple Menu found in the LINWorks suite or by a custom product or even via the API functions of a supplied DLL.\u003c\/p\u003e\n\n\u003ch2\u003eOperating System Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe LINWorks-V2 software suite is compatible to Win-XP, Win7, Win8 and Win10 (16 and 32-bit). A Linux version is available upon request.\u003c\/p\u003e\n\n\u003ch2\u003eDigital I\/O\u003c\/h2\u003e\n\n\u003cp\u003eAlso, the module's digital outputs can be controlled by the values of the bus signals. For instance; an output can be set, if a signal is equal to, not equal to, greater or less than a reference value. It also can be tested, if a certain signal value is within a given range or not.\u003c\/p\u003e\n\n\u003ch2\u003eLIN Bus Interface\u003c\/h2\u003e\n\n\u003cp\u003eThe implemented LIN driver supports bus voltages up to 36 volts and can be used to up to 200 Kbit\/s. These way even nodes that operate outside the standard limits of the LIN specifications can be controlled with the \u003cstrong\u003eBaby-LIN-RM-III\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eCAN Bus Interface\u003c\/h2\u003e\n\n\u003cp\u003eOne CAN interface is designed as a high-speed interface, conforming to ISO-11898 with a SN65HVD251 driver while the other interface utilises a fault-tolerant low-speed physical layer conforming to ISO-11519 with a TJA1054 transceiver.\u003c\/p\u003e\n\n\u003ch2\u003eGalvanically Isolated Interfaces\u003c\/h2\u003e\n\n\u003cp\u003eAll communication interfaces (LIN, CAN and USB) as well as the digital inputs are galvanically isolated from the module's logic circuit.\u003c\/p\u003e\n\n\u003ch2\u003eProgrammable Buttons\u003c\/h2\u003e\n\n\u003cp\u003eAdditionally, the Baby-LIN-RM-II offers two programmable buttons that may be configured to control the start and stop functions of the bus.\u003c\/p\u003e\n\n\u003ch2\u003eStand-alone Operation\u003c\/h2\u003e\n\n\u003cp\u003eThe configuration designed on a computer can be transferred to and stored on the device, allowing you to use the controller as a standalone device, without any computer.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBaby-LIN-RM-III\u003c\/strong\u003e makes is easy to add LIN or CAN bus communication capabilities to PLC-based test equipment such as durability test facilities, validation tests etc. The Baby-LIN-RM-II is equipped with a powerful 32-bit microcontroller that handles all time-critical operations such as message formatting and the decoding of the bus protocol.\u003cbr\u003e\n.\u003c\/p\u003e","brand":"Lipowsky Industrie Elektronik GmbH","offers":[{"title":"Default Title","offer_id":37768433893565,"sku":"BABY-LIN-RM-III","price":1175.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lipowsky-industrie-elektronik-gmbh-pc-adapter-lipowsky-baby-lin-rm-iii-lin-bus-adapter-34534838763743.jpg?v=1685093334"},{"product_id":"mikroe-codegrip-for-pic-uk","title":"CODEGRIP for PIC","description":"\u003cp\u003e\u003ci\u003e \u003c\/i\u003e \u003cimg alt=\"CODEGRIP yellow logo\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-logo.png\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eUniversal programmer and debugger for PIC, dsPIC   and PIC32 over USB-C and WiFi (optional)\u003c\/p\u003e\n\n\u003ch2\u003eThe World's First Debugger Over WiFi\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip front debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDebugging and Programming over WiFi\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP is the first-ever embedded programmer \u0026amp; debugger over WiFi. Enjoy a cable-free world!\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n*CODEGRIP WiFi License is available as an add-on feature. \u003cimg alt=\"codegrip side debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAccess anywhere, under any circumstances at anytime\u003c\/h3\u003e\n\n\u003cp\u003eUnlimited possibilities for development, you can place the CODEGRIP programmer \u0026amp; debugger in almost any hardly accessible places such as hazardous environment, agricultural setting, and high-rise buildings while still retaining full debugging and programming access.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip back debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-pic\/codegrip-pic-back.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eRedefine technical support\u003c\/h3\u003e\n\n\u003cp\u003eReplicating your hardware has always been a challenge; debugging through WiFi enables technical support to access your hardware if required directly.\u003c\/p\u003e\n\n\u003cp\u003eDo more with less effort!\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP programmer \u0026amp; debugger, please read the CODEGRIP Manual (see Downloads Tab).\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Programmer and debugger CODEGRIP PIC v8 legend\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-pic\/codegrip-pic-in-position-and-legend.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCODEGRIP Suite\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot1\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-pic\/codegrip-suite-scan-screenshot1.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCODEGRIP Suite\u003c\/h3\u003e\n\n\u003cp\u003eThe CODEGRIP Suite is a powerful software tool. It is used to intelligently manage programming tasks and various other options and settings of the CODEGRIP.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot2\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-pic\/codegrip-suite-scan-screenshot2.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eEffortless Programming with Complete Control over MCU's\u003c\/h3\u003e\n\n\u003cp\u003eWireless connectivity and USB-C connector allow seamless and effortless programming of many PIC microcontrollers, providing users with mobility and complete control over the microcontroller programming and debugging process.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot3\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-pic\/codegrip-suite-scan-screenshot3.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePlug and Play\u003c\/h3\u003e\n\n\u003cp\u003eThe USB-C Debugger enables effortless programming\/debugging over a generic USB driver connection without the need for additional driver support.\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP Suite and module, please read the CODEGRIP Manual.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB-C","offer_id":43329196982495,"sku":"MIKROE-5262","price":139.3,"currency_code":"GBP","in_stock":true},{"title":"USB-C and WiFi","offer_id":43329197015263,"sku":"MIKROE-4544","price":160.3,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroe-programmer-codegrip-for-pic-37999688417503.jpg?v=1684971295"},{"product_id":"active-pro-debug-toolbox","title":"Active-Pro Firmware Debugger","description":"","brand":"Active Firmware Tools","offers":[{"title":"Default Title","offer_id":44127073599711,"sku":"AP-FD","price":549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/active-firmware-tools-ap-fd-active-pro-firmware-debugger-43389743268063.png?v=1724368242"},{"product_id":"segger-j-link-pro-debugger-programmer-8-12-00","title":"SEGGER J-Link PRO – Ultra-Fast Ethernet\/USB Debug Probe","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional JTAG\/SWD Debug Probe with Dual Interface Connectivity\u003c\/h2\u003e\n\u003cp\u003eThe SEGGER J-Link PRO is a high-performance debug probe that combines USB and Ethernet interfaces for maximum flexibility in embedded development. With download speeds up to 4 MB\/s and support for remote debugging via Ethernet, this probe is ideal for professional development environments and test farms.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003ch3\u003eKey Technical Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eDual Interface:\u003c\/strong\u003e USB 2.0 Hi-Speed and 100 Mbit\/s Ethernet\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTarget Interface:\u003c\/strong\u003e JTAG\/SWD 20-pin standard connector\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDownload Speed:\u003c\/strong\u003e Up to 4 MB\/s via Ethernet, 3 MB\/s via USB\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTarget Voltage:\u003c\/strong\u003e 1.2V to 5V with automatic level detection\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e\n\u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e\n\u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVTRef\u003c\/td\u003e\n\u003ctd\u003eTarget voltage reference (1.2V-5V)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eNC\u003c\/td\u003e\n\u003ctd\u003eNot connected\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003enRST\u003c\/td\u003e\n\u003ctd\u003eTarget reset (open drain)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eTDI\u003c\/td\u003e\n\u003ctd\u003eJTAG data input\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eTMS\/SWDIO\u003c\/td\u003e\n\u003ctd\u003eTest mode select \/ SWD data I\/O\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eTCK\/SWCLK\u003c\/td\u003e\n\u003ctd\u003eTest clock \/ SWD clock\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003eTDO\/SWO\u003c\/td\u003e\n\u003ctd\u003eJTAG data output \/ SWD trace output\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003enSRST\u003c\/td\u003e\n\u003ctd\u003eSystem reset (optional)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003ctd\u003eVCC\u003c\/td\u003e\n\u003ctd\u003eTarget power supply (max 300mA)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e4,6,8,10,12,14,16,18,20\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround connections\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e\n\u003ch3\u003eEthernet Configuration\u003c\/h3\u003e\n\u003cp\u003eThe J-Link PRO supports DHCP by default and includes a built-in web server for easy network configuration. Access the configuration interface by connecting to the device's IP address in any web browser.\u003c\/p\u003e\n\u003cdiv class=\"spec-note\"\u003e \u003cstrong\u003eNetwork Requirements:\u003c\/strong\u003e Standard Ethernet network with DHCP server. Static IP configuration available via web interface or J-Link Configurator. \u003c\/div\u003e\n\u003cdiv class=\"imgph\"\u003e [Placeholder: J-Link PRO Ethernet connection diagram showing network setup] \u003c\/div\u003e\n\u003ch3\u003eSoftware Integration\u003c\/h3\u003e\n\u003cp\u003eCompatible with all major IDEs including SEGGER Embedded Studio, Keil µVision, IAR EWARM, Eclipse-based environments, and command-line tools via GDB Server. Includes licenses for:\u003c\/p\u003e\n\u003cul\u003e \u003cli\u003eUnlimited Flash Breakpoints\u003c\/li\u003e \u003cli\u003eSEGGER Ozone debugger\u003c\/li\u003e \u003cli\u003eJ-Flash programming software\u003c\/li\u003e \u003cli\u003eReal-Time Transfer (RTT) technology\u003c\/li\u003e \u003c\/ul\u003e\n\u003cpre\u003e\u003ccode\u003e\/\/ Example RTT output setup #include \"SEGGER_RTT.h\" void debug_output(void) { SEGGER_RTT_WriteString(0, \"Debug message via RTT\\n\"); }\u003c\/code\u003e\u003c\/pre\u003e\u003c\/section\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263171948767,"sku":"8.12.00","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-12-00-40189792583903.jpg?v=1688907179"},{"product_id":"segger-j-link-wifi-8-14-28","title":"SEGGER J-Link WiFi Wireless Debug Probe (8.14.28)","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional Wireless Debugging for Mobile Applications\u003c\/h2\u003e \u003cp\u003eThe J-Link WiFi represents a breakthrough in embedded debugging technology, combining SEGGER's industry-leading debug capabilities with wireless connectivity. This JTAG\/SWD debug probe operates at speeds up to 15MHz, delivering professional-grade debugging performance through a stable WiFi interface.\u003c\/p\u003e \u003ch3\u003eWireless Freedom for Modern Development\u003c\/h3\u003e \u003cp\u003eEliminate the constraints of physical connections when debugging mobile applications, robotic systems, or embedded devices that require movement during testing. The J-Link WiFi enables remote debugging scenarios previously impossible with traditional wired probes.\u003c\/p\u003e \u003cdiv class=\"aside\"\u003e \u003cstrong\u003eKey Applications:\u003c\/strong\u003e Mobile robotics, IoT devices in hazardous environments, rotating machinery, and any application where physical cable connections prove impractical or dangerous. \u003c\/div\u003e \u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e \u003cp\u003eConnect your target system using the standard 20-pin JTAG\/SWD interface:\u003c\/p\u003e \u003ctable class=\"tbl\"\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003ePin\u003c\/th\u003e \u003cth\u003eSignal\u003c\/th\u003e \u003cth\u003eDescription\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e1\u003c\/td\u003e \u003ctd\u003eVTref\u003c\/td\u003e \u003ctd\u003eTarget reference voltage (1.2V - 5V)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e7\u003c\/td\u003e \u003ctd\u003eSWDIO\u003c\/td\u003e \u003ctd\u003eSerial Wire Data I\/O (bidirectional)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e9\u003c\/td\u003e \u003ctd\u003eSWCLK\u003c\/td\u003e \u003ctd\u003eSerial Wire Clock\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e13\u003c\/td\u003e \u003ctd\u003eSWO\u003c\/td\u003e \u003ctd\u003eSerial Wire Output (trace data)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e15\u003c\/td\u003e \u003ctd\u003enRESET\u003c\/td\u003e \u003ctd\u003eTarget reset (active low)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e19\u003c\/td\u003e \u003ctd\u003e5V Supply\u003c\/td\u003e \u003ctd\u003eTarget power (max 300mA)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp class=\"spec-note\"\u003eEven-numbered pins (2, 4, 6, 8, 10, 12, 14, 16, 18, 20) connect to ground.\u003c\/p\u003e \u003ch3\u003eNetwork Configuration\u003c\/h3\u003e \u003cp\u003eThe J-Link WiFi includes a built-in web server for easy network configuration. Connect via USB initially to configure WiFi settings through the web interface at the device's IP address.\u003c\/p\u003e \u003cpre\u003e\u003ccode\u003e\/\/ Example GDB connection via WiFi target remote 192.168.1.100:2331 monitor reset load continue\u003c\/code\u003e\u003c\/pre\u003e \u003ch3\u003eProfessional Software Suite\u003c\/h3\u003e \u003cp\u003eIncludes comprehensive licenses for:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUnlimited Flash Breakpoints\u003c\/li\u003e \u003cli\u003eJ-Flash programming software\u003c\/li\u003e \u003cli\u003eOzone graphical debugger\u003c\/li\u003e \u003cli\u003eRDI\/RDDI interfaces\u003c\/li\u003e \u003cli\u003eGDB Server\u003c\/li\u003e \u003c\/ul\u003e \u003c\/section\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172014303,"sku":"8.14.28","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-14-28-segger-j-link-wifi-8-14-28-42714466615519.png?v=1722900000"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/tr-segger-j-link-plus-angle-right.png?v=1724420433","url":"https:\/\/thedebugstore.com\/en-si\/collections\/development-tools.oembed","provider":"Debug Store","version":"1.0","type":"link"}