{"title":"Memory Device Programmers","description":"\u003cp data-mce-fragment=\"1\"\u003eMemory Device Programmers are essential tools for writing, reading, erasing, and verifying data on various memory devices. Whether you're a professional in the electronics industry or an enthusiastic hobbyist, The Debug Store offers a wide selection of high-quality memory device programmers to meet your programming needs.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAt The Debug Store, we understand the importance of reliable and efficient programming solutions when working with memory devices. Our range of Memory Device Programmers is carefully curated to provide the best tools for effortless programming and debugging. Whether you're working with EEPROMs, flash memory, microcontrollers, or other memory devices, we have the perfect programmer to suit your requirements.\u003c\/p\u003e","products":[{"product_id":"total-phase-tp240141-aardvark-i2c-spi-interface","title":"Total Phase Aardvark I2C\/SPI Host Adapter","description":"\u003csection\u003e\n\u003ch2\u003eFull Description\u003c\/h2\u003e\n\u003cp\u003eThe Total Phase Aardvark I2C\/SPI Host Adapter is a USB-powered host adapter designed for electronic design engineers who need reliable, controllable access to I2C and SPI buses during bring-up, debugging, and production scripting. Operating as both master and slave, it supports I2C at up to 800kHz and SPI at up to 8MHz in master mode (4MHz in slave mode), with a standard 2×5 IDC target connector exposing I2C (SCL\/SDA), SPI (MOSI\/MISO\/SCLK\/SS) and up to six GPIO signals. It interfaces over USB to Windows, Linux, and macOS, and is supplied with the Control Center Serial GUI, Flash Center programming utility, and cross-platform APIs for C\/C\/C#, Python and .NET. With target power output available at +5V for low-current devices and a compact footprint that fits easily on a crowded bench, it provides a dependable link between a computer and digital peripherals without imposing unnecessary complexity.\u003c\/p\u003e\n\u003ch2\u003eUSB to I2C Master\/Slave Control up to 800kHz for Fast Bring-up\u003c\/h2\u003e\n\u003cp\u003eAs an I2C host adapter, the Aardvark operates in both master and slave modes across typical development speeds from a few kilohertz up to 800kHz. This covers Standard-mode (100kHz) and Fast-mode (400kHz) devices comfortably and provides headroom for designs that push closer to 800kHz during evaluation. Master mode enables scripted register access, burst reads, and device initialisation sequences, while slave mode allows engineers to emulate peripherals to test a host SoC’s behavioural edge cases. In practice, this means a board with a temperature sensor and an EEPROM can be validated quickly by writing configuration registers, verifying ACK\/NACK behaviour, and reading back calibration data under repeatable conditions. The direct benefit is reduced time-to-first-success during board bring-up: with deterministic control of bit rate, addressing (7-bit\/10-bit), and transaction framing, engineers can focus on root cause rather than fighting tool setup.\u003c\/p\u003e\n\u003ch2\u003eSPI Master to 8MHz and Slave to 4MHz for Peripheral Exercise\u003c\/h2\u003e\n\u003cp\u003eOn SPI, Aardvark supports master mode up to 8MHz and slave mode up to 4MHz, with control over mode (CPOL\/CPHA), bit order, and chip select handling across the 2×5 IDC header. These rates are well suited to common flash memories, DACs\/ADCs, motor controllers and LED drivers that are rarely exercised above 10MHz during early validation. By driving deterministic patterns and parsing responses in the same session, an engineer can rapidly iterate on timing hypotheses—switching between Mode 0 and Mode 3, for example—to isolate sampling edge issues. When used as an SPI slave, Aardvark can emulate a sensor or memory device to verify that a microcontroller’s SPI driver adheres to command framing and timing requirements, a practical way to catch off-by-one and CS deassertion bugs before firmware freeze. The measurable outcome is fewer lab cycles and clearer pass\/fail criteria for interface readiness.\u003c\/p\u003e\n\u003ch2\u003eStandard 2×5 IDC Target Connector with I2C, SPI and up to Six GPIOs\u003c\/h2\u003e\n\u003cp\u003eThe adapter’s 2×5 IDC (2.54mm pitch) target connector presents a predictable, lab-friendly pinout: I2C (SCL, SDA), SPI (MISO, MOSI, SCLK, SS), ground, +5V target power for low-current devices, and up to six GPIO lines. Engineers benefit from quick swaps between fixtures and DUTs using ribbon cables that are already commonplace on mixed-signal benches. GPIOs can toggle control pins such as resets, enables, or mode selects, or sample status lines to coordinate test steps. This consolidation reduces the need to juggle multiple USB widgets for simple digital manipulation. In a concrete scenario, a GPIO can hold a PMIC in shutdown while SPI writes a configuration to a companion device; then a GPIO release triggers power-up to verify a clean boot sequence under scripted control.\u003c\/p\u003e\n\u003ch2\u003eControl Center Serial GUI for Interactive Debugging and Repeatable Automation\u003c\/h2\u003e\n\u003cp\u003eThe supplied Control Center Serial application makes the Aardvark immediately productive without writing code. Engineers can configure bit rates (I2C up to 800kHz; SPI up to 8MHz), bus modes, and active lines, then compose transactions interactively to poke registers or stream data. Crucially, the GUI supports batch execution via XML scripts, so a proven manual sequence can be captured once and re-run as an automated regression across firmware revisions or PCB spins. This is particularly useful for validating that a board still boots and enumerates properly after an ECO, or that an I2C expander’s configuration survives power cycles. For teams, scripts become lightweight test fixtures—repeatable, reviewable, and version-controlled—without the upfront cost of a full test framework.\u003c\/p\u003e\n\u003ch2\u003eFlash Center Utility for I2C\/SPI EEPROM and Flash Programming\u003c\/h2\u003e\n\u003cp\u003eFor memory programming tasks, the Flash Center utility streamlines operations on I2C and SPI EEPROMs and NOR flash devices using an extensible parts library. Engineers can select a device, set the required speed (e.g., I2C at 400kHz for 24-series EEPROMs or SPI at several megahertz for 25-series flash), and program images with automatic page handling and erase\/write sequencing. This saves time compared to hand-coding page-aligned transactions and status polling, and reduces the chance of subtle mistakes such as failing to wait for WIP bits to clear. In production support, this enables quick field updates to peripheral images or calibration data. During development, it’s invaluable for restoring golden images after deliberate corruption tests or validating that bootloaders correctly read a known-good payload.\u003c\/p\u003e\n\u003ch2\u003eCross-Platform APIs for C\/C\/C#, Python and .NET to Integrate with Test Benches\u003c\/h2\u003e\n\u003cp\u003eThe Aardvark includes cross-platform APIs and bindings for C, C++, C#, Python and .NET on Windows, Linux and macOS. This allows the adapter to plug into existing test harnesses and CI pipelines. Engineers can write concise scripts to exercise I2C at 100kHz for power-on defaults, then switch to 800kHz to stress-read buffers, or sweep SPI from 1MHz to 8MHz to bracket timing margins. Return codes and exceptions can be mapped directly to pass\/fail criteria and logged alongside firmware and PCB revision identifiers. Integrating these scripts with a logic analyser such as a Saleae mixed-signal instrument provides protocol decode corroboration, so a single test run both drives traffic and captures waveforms for later review, tightening feedback loops between hardware and firmware.\u003c\/p\u003e\n\u003ch2\u003eMaster\/Slave Emulation for Host and Peripheral Testing\u003c\/h2\u003e\n\u003cp\u003eBidirectional capability is central to the Aardvark’s role in the lab. In master mode, it stands in for a microcontroller to validate sensors, PMICs, expanders, and displays before firmware is stable. In slave mode, it emulates the target peripheral to harden host drivers, particularly valuable when the real device is back-ordered or when controlled error injection is needed. For instance, by emulating an I2C temperature sensor that NACKs every fourth transaction at 400kHz, firmware robustness to transient errors can be characterised without specialised fixtures. Similarly, an SPI slave emulation at 4MHz can check that the host asserts chip select for the entire frame and respects required inter-byte delays, preventing field issues caused by marginal timing.\u003c\/p\u003e\n\u003ch2\u003eEveryday Debugging Scenarios: From Simple Checks to Edge Cases\u003c\/h2\u003e\n\u003cp\u003eIn a simple scenario, an engineer validating a new sensor board uses I2C master mode at 100kHz to read WHO_AM_I, confirms the expected ID, then increases to 400kHz to stream measurements while adjusting GPIO-controlled ranges. If a register write appears ineffective, a quick cross-check with a logic analyser’s protocol decode confirms a missed stop condition; adjusting the transaction resolves it immediately. In another common case, programming a 25-series SPI flash at 8MHz to load a boot image takes minutes via Flash Center, after which the engineer uses slave mode at 4MHz to emulate a slightly slower device and ensure the host tolerates extended busy times. For edge cases, an engineer can script mid-transaction resets using a GPIO line while monitoring bus behaviour, reproducing elusive bugs such as stuck lines or CS race conditions and capturing them for the firmware team to fix.\u003c\/p\u003e\n\u003ch2\u003ePower and Physical Considerations for Bench Efficiency\u003c\/h2\u003e\n\u003cp\u003eThe adapter is USB bus-powered, eliminating an external PSU and simplifying bench wiring. Target power at +5V is available for low-current devices, which is convenient when validating small breakout boards or low-power peripherals that do not yet have a stable on-board supply. The compact enclosure and standard ribbon cable reduce strain on fragile headers and make it straightforward to leave the adapter connected during extended testing. Engineers focused on 1.8V targets can pair the Aardvark with a suitable level shifter to align logic thresholds, maintaining signal integrity while exercising devices at representative speeds. This modular approach avoids over-investing in features that are only occasionally required, while keeping the core interface accessible and predictable.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Tool in the Total Phase Ecosystem\u003c\/h2\u003e\n\u003cp\u003eThe Aardvark sits alongside other Total Phase tools to cover a wide range of serial workflows. For designs that need much higher bus speeds or integrated, selectable voltage levels, consider stepping up to the Promira Serial Platform, which extends I2C into the multi-megahertz range and SPI beyond tens of megahertz with configurable level shifting and additional I\/O resources. For non-intrusive capture and deep timing analysis, pair the Aardvark with a protocol analyser such as a Saleae mixed-signal logic analyser; this combination lets one tool generate traffic while the other provides timestamped protocol decode and waveform context. Where SPI throughput alone is critical at higher master rates, the Cheetah SPI Host Adapter is an alternative optimised for speed. Selecting among these options ensures the lab covers generation, capture, and performance corners without redundancy.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAardvark vs Other I2C\/SPI Tools\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen selecting an \u003c\/span\u003e\u003cspan\u003eI2C SPI host adapter\u003c\/span\u003e\u003cspan\u003e, it is important to understand how the Aardvark compares to other tools in the same category.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAardvark vs Low-Cost USB I2C Adapters\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBasic USB-to-I2C converters typically:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOnly support master mode\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLack SPI support or advanced control\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDo not include APIs or automation tools\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe Aardvark provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFull master and slave operation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSPI support up to 8 MHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eProfessional-grade APIs and scripting tools\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReliable use in production environments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAardvark vs Total Phase Promira Serial Platform\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Promira Serial Platform is designed for higher-performance applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePromira → higher speed, advanced voltage control, extended features\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAardvark → cost-effective, widely used for everyday development and debugging\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor most engineering workflows, the Aardvark provides the ideal balance of capability and simplicity.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAardvark vs Beagle Protocol Analyzer\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAardvark → active communication tool (generates I2C\/SPI traffic)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBeagle → passive monitoring tool (captures and analyses bus traffic)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMany engineers use both together for full debugging visibility.\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWho Should Use the Total Phase Aardvark\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Aardvark I2C\/SPI Host Adapter is ideal for:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eEmbedded systems engineers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFirmware developers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHardware validation engineers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eElectronics design teams\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eProduction test engineers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eR\u0026amp;D laboratories\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUniversity engineering departments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is especially useful where direct \u003c\/span\u003e\u003cspan\u003eUSB to I2C SPI communication\u003c\/span\u003e\u003cspan\u003e is required for testing and automation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUK Availability – TP240141 Total Phase Aardvark \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Total Phase Aardvark I2C\/SPI Host Adapter (TP240141) is available for purchase in the UK from The Debug Store with full manufacturer compatibility and official software support.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is widely used as a \u003c\/span\u003e\u003cspan\u003eUSB to I2C SPI adapter\u003c\/span\u003e\u003cspan\u003e for embedded development, firmware debugging, EEPROM programming, and SPI Flash programming applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEngineers in the UK looking for a reliable I2C SPI host adapter often choose the Aardvark for its proven performance and cross-platform support. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhether referenced as:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTotal Phase Aardvark UK\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eAardvark I2C SPI host adapter\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUSB to I2C SPI adapter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTP240141 Total Phase Aardvark\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis product remains a standard tool in professional embedded engineering workflows\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cp\u003eFor higher performance and integrated level shifting, explore the \u003ca href=\"https:\/\/thedebugstore.com\/products\/total-phase-promira-serial-platform\"\u003eTotal Phase Promira Serial Platform serial host adapter\u003c\/a\u003e. For dedicated high-speed SPI generation, see the \u003ca href=\"https:\/\/thedebugstore.com\/products\/total-phase-cheetah-spi-host-adapter\"\u003eTotal Phase Cheetah SPI Host Adapter for fast SPI master\u003c\/a\u003e. To complement Aardvark with capture and protocol decode, consider a \u003ca href=\"https:\/\/thedebugstore.com\/collections\/saleae\"\u003eSaleae logic analyser mixed-signal instrument\u003c\/a\u003e for protocol decode and timing correlation during debugging. If low-voltage targets are common, add a suitable level shifter; pairing Aardvark with a \u003ca href=\"https:\/\/thedebugstore.com\/products\/total-phase-level-shifter-board\"\u003eTotal Phase Level Shifter Board for I2C\/SPI voltage translation\u003c\/a\u003e helps maintain signal integrity on 1.8V or 2.5V buses.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37754547896509,"sku":"TP240141","price":335.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp240141-total-phase-aardvark-i2c-spi-host-adapter-tp240141-debug-store-uk-42624390168799.png?v=1717340146"},{"product_id":"amfeltec-sku-018-01-easy-loader-uk","title":"Amfeltec Universal In-Circuit Programmer\/Loader","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe In-Circuit Programmer\/Loader (\"EasyLoader\" or \"eLoader\") is a standalone device that was designed to provide a flexible and cost-effective solution for electronic device manufacturers, as well as for hardware design companies and their customers. It allows you to upgrade code on any JTAG\/SPI\/I2C compliant device (like FPGA\/CPLD\/EEprom\/Flash, etc.) or Microcontrollers at any time of development, testing or production.\u003c\/p\u003e\n\n\u003cp\u003eIts small size and ease of use make the \"eLoader\" a unique device for the electronics manufacturing industry. Practically anyone can use it without making any mistakes. Once configured using a PC, it can be repeatedly used for a particular electronic product. An intuitive red\/green LED interface indicates the operation status, making it ideal for a manufacturing line environment. Eliminate the need to pre-program (before assembly) as code releases can be loaded momentarily — just before a manufactured device is shipped to a customer.\u003c\/p\u003e\n\n\u003cp\u003eUpon initial configuration, the \"eLoader\" functions as a completely standalone device that does not require connection to a host PC, power cable or batteries.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eBoard Assembly House\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eeLOADER\u003c\/strong\u003e can be used in a board assembly house to program the programmable logic devices as they come off the assembly line. It's easy to use, so minimal training is required for the personnel. After initial configuration, the device does not require a computer connection for normal operation. This can help you completely avoid pre-programming parts and first article sign off, and as a result you can significantly reduce production costs.\u003c\/p\u003e\n\n\u003ch2\u003eUpdate Firmware Prior to Shipping\u003c\/h2\u003e\n\n\u003cp\u003eBoards can be programmed just prior to shipping to the customer. This ensures that only the latest firmware will be used. It also adds further flexibility, because a board can be programmed with different security\/capability settings based on the particular customer order. There's no need to stock boards with different firmware; instead, program each board as the order comes in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv lang=\"en-us\" xml:lang=\"en-us\"\u003e\n\u003ciframe allowfullscreen=\"1\" frameborder=\"0\" height=\"360\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/b_K50t63YOc?controls=0\u0026amp;modestbranding=1\u0026amp;rel=0\u0026amp;showinfo=0\u0026amp;loop=0\u0026amp;hl=en\u0026amp;iv_load_policy=1\u0026amp;wmode=transparent\u0026amp;enablejsapi=1\u0026amp;origin=https%3A%2F%2Fwww.amfeltec.com\u0026amp;widgetid=1\" teidentifier=\"qm9f56bs69mlgw5e76y\" title=\"YouTube video player\" width=\"640\"\u003e\u003c\/iframe\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\nPlay Video\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch2\u003eRemote Firmware Update\u003c\/h2\u003e\nThe compact size and ease of use make it possible to simply ship the \u003cstrong\u003eeLOADER\u003c\/strong\u003e to customers. The \u003cstrong\u003eeLoader\u003c\/strong\u003e starts working after the power is turned on so it can be easily operated by anyone. There's no need to send an engineer overseas just to reprogram a customer's device or to ship a device back to the factory for an update or replacement.\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eEngineering\u003c\/h2\u003e\n\n\u003cp\u003eBecause the\u003cstrong\u003e eLOADER\u003c\/strong\u003e doesn't need a computer for normal operation, it can be a very useful portable programming\/loading solution in the event that the debugging laboratory and engineering cubes are in different locations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Amfeltec Corp","offers":[{"title":"Default Title","offer_id":37768295055549,"sku":"SKU-018-01","price":150.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/amfeltec-corp-programmer-sku-018-01-easy-loader-programmer-30225612144829.jpg?v=1685068304"},{"product_id":"dediprog-sf100-spi-programmer-uk","title":"Dediprog SF100 SPI NOR Flash Programmer","description":"\u003ch3\u003eHardware\u003c\/h3\u003e\n\n\u003cp\u003eThe\u003cstrong\u003e Dediprog SF100\u003c\/strong\u003e is designed with an ISP header, through an appropriate connector; users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF100 2x7 header pin out. DediProg also provides the SF100 ISP Cable which is used to connect the SF100 programmer to the 2X4 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF100 ISP Cable 2x4 pin out.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSF100 ISP Header Pin Out (2x7)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ctable align=\"center\" border=\"1\"\u003e\n\t\u003ctbody\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e1\u003c\/td\u003e\n\t\t\t\u003ctd\u003eI\/O1\u003c\/td\u003e\n\t\t\t\u003ctd\u003eI\/O4\u003c\/td\u003e\n\t\t\t\u003ctd\u003e2\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e3\u003c\/td\u003e\n\t\t\t\u003ctd\u003eI\/O2 or CS2\u003c\/td\u003e\n\t\t\t\u003ctd\u003eNC\u003c\/td\u003e\n\t\t\t\u003ctd\u003e4\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e5\u003c\/td\u003e\n\t\t\t\u003ctd\u003eVcc\u003c\/td\u003e\n\t\t\t\u003ctd\u003eGND\u003c\/td\u003e\n\t\t\t\u003ctd\u003e6\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e7\u003c\/td\u003e\n\t\t\t\u003ctd\u003eCS\u003c\/td\u003e\n\t\t\t\u003ctd\u003eCLK\u003c\/td\u003e\n\t\t\t\u003ctd\u003e8\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e9\u003c\/td\u003e\n\t\t\t\u003ctd\u003eMISO\u003c\/td\u003e\n\t\t\t\u003ctd\u003eMOSI\u003c\/td\u003e\n\t\t\t\u003ctd\u003e10\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e11\u003c\/td\u003e\n\t\t\t\u003ctd\u003eVpp\/Acc\u003c\/td\u003e\n\t\t\t\u003ctd\u003eI\/O3\u003c\/td\u003e\n\t\t\t\u003ctd\u003e12\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e13\u003c\/td\u003e\n\t\t\t\u003ctd\u003eSCL\u003c\/td\u003e\n\t\t\t\u003ctd\u003eSDA\u003c\/td\u003e\n\t\t\t\u003ctd\u003e14\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eISP Cable Connector Pin Out (2x4)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ctable align=\"center\" border=\"1\"\u003e\n\t\u003ctbody\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e1\u003c\/td\u003e\n\t\t\t\u003ctd\u003eVcc\u003c\/td\u003e\n\t\t\t\u003ctd\u003eGND\u003c\/td\u003e\n\t\t\t\u003ctd\u003e2\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e3\u003c\/td\u003e\n\t\t\t\u003ctd\u003eCS\u003c\/td\u003e\n\t\t\t\u003ctd\u003eCLK\u003c\/td\u003e\n\t\t\t\u003ctd\u003e4\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e5\u003c\/td\u003e\n\t\t\t\u003ctd\u003eMISO\u003c\/td\u003e\n\t\t\t\u003ctd\u003eMOSI\u003c\/td\u003e\n\t\t\t\u003ctd\u003e6\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e7\u003c\/td\u003e\n\t\t\t\u003ctd\u003eVpp\/Acc\u003c\/td\u003e\n\t\t\t\u003ctd\u003eI\/O3\u003c\/td\u003e\n\t\t\t\u003ctd\u003e8\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eSF100 Application Software\u003c\/h3\u003e\n\n\u003cp\u003eThe SF100 USB software tool chain offers high flexibility and fits different and the highest requirements:\u003c\/p\u003e\n\n\u003ch4\u003e\u003cstrong\u003eEngineering Mode\u003c\/strong\u003e\u003c\/h4\u003e\n\n\u003cp\u003eFor engineers and expert to access advanced features for development, repairing etc.\u003c\/p\u003e\n\n\u003ch4\u003e\u003cstrong\u003eProduction Mode\u003c\/strong\u003e\u003c\/h4\u003e\n\n\u003cp\u003eThe SF100 Application software supports \u003cstrong\u003eGang Programming\u003c\/strong\u003e\u003cstrong\u003e. \u003c\/strong\u003eAdditional programmers can be added at any time production capacity needs to be increased.\u003c\/p\u003e\n\n\u003cp\u003eFor operators in production to control multiple programmers and improve the throughput.\u003c\/p\u003e\n\n\u003ch4\u003e\u003cstrong\u003eCommand Line\u003c\/strong\u003e\u003c\/h4\u003e\n\n\u003cp\u003eCustomer software can control multiple SF100 programmers by command line interface.\u003c\/p\u003e\n\n\u003ch4\u003e \u003c\/h4\u003e","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":37768306950333,"sku":"SF100","price":290.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/dediprog-technology-co-ltd-sf100-dediprog-sf100-spi-nor-flash-programmer-70707502580087.png?v=1727574581"},{"product_id":"su-3000-gang-programmer-leap-electronic-uk","title":"Leap SU-3000 Gang Programmer","description":"\u003cp\u003eSU-3000 is a high-speed \u0026amp; modular gang programmer for production. Quickly supporting new devices, particular for wireless, PDA and cell phone industries.\u003c\/p\u003e","brand":"Leaptronix","offers":[{"title":"Default Title","offer_id":37768309178557,"sku":"SU-3000","price":434.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/leap-electronic-co-ltd-programmer-su-3000-gang-programmer-29034923524285.jpg?v=1685080915"},{"product_id":"uprog-le-universal-programmer-rk-system-uk","title":"RK-System UProg-LE Universal Programmer","description":"\u003cp\u003eThe RK-System Uprog LE supports a basic range of programmable devices and is therefore available at a low price. Its 48 universal pin-drivers allow using any 48-pin adapters for non-DIP packages. Built-in in-system programming connector enables the programmer to program ISP capable chips in circuit.  New software for Windows 2000 and newer systems was esigned for intuitive operation. It supports many programmers simultaneously, so several programmers may be connected to the PC in to increase efficiency of whole system.\u003c\/p\u003e","brand":"RK-System","offers":[{"title":"Default Title","offer_id":37768314552509,"sku":"UPROG-LE","price":270.41,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/rk-system-programmer-uprog-le-universal-programmer-23152199565501.jpg?v=1685149663"},{"product_id":"uprog-icp-in-system-programmer-rk-system-uk","title":"RK-System UProg-ICP In-System Programmer","description":"\u003cp\u003eThe RK-System Uprog-ICP is a small, hand-held programmer, designed for programming EEPROM, Flash EPROM, microcontrollers (8051, ARM, PIC, AVR etc.) and logic devices (CPLD, FPGA) in the target board. A range of hardware interfaces are also supported including I2C, SPI, Microwire, 1-wire etc.  The Uprog-ICD is powered by its USB interface, when connected to the host PC and includes full MS Windows based software that will support multiple programmers.\u003c\/p\u003e","brand":"RK-System","offers":[{"title":"Default Title","offer_id":37768314618045,"sku":"UPROG-ICP","price":174.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/rk-system-programmer-uprog-icp-in-system-programmer-23152199336125.jpg?v=1685149491"},{"product_id":"uprog-icp-zif-rk-system-uk","title":"RK-System UProg-ICP-ZIF Adapter","description":"\u003cp\u003eThe RK-System Uprog-ICP programmer can optionally be equipped with an additional board fitted with a  ZIF socket that allows non-ICP programming of devices in DIL packages, or other types using adapters.   Using a short cable, the user is able to connect the control signals from programmers ICP socket to respective pins of the device.\u003c\/p\u003e","brand":"RK-System","offers":[{"title":"Default Title","offer_id":37768314650813,"sku":"UPROG-ICP-ZIF","price":53.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/rk-system-programmer-adapter-uprog-icp-zif-adapter-23152199368893.jpg?v=1685149322"},{"product_id":"uprog-lite-lpt-universal-programmer-rk-system-uk","title":"RK-System UProg-LITE-LPT Universal Programmer","description":"\u003cp\u003eUprog LITE has build-in interface for in-circuit programming via SPI, JTAG and others.\u003c\/p\u003e","brand":"RK-System","offers":[{"title":"Default Title","offer_id":37768315142333,"sku":"UPROG-LITE","price":137.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/rk-system-programmer-uprog-lite-lpt-universal-programmer-23152199499965.jpg?v=1685123218"},{"product_id":"total-phase-tp280121-cheetah-spi-adapter-uk","title":"Total Phase Cheetah SPI Host Adapter","description":"\u003csection class=\"product-rich\"\u003e\n\u003ch3\u003eProfessional SPI Host Adapter for High-Performance Applications\u003c\/h3\u003e\n\u003cp\u003eThe Total Phase Cheetah SPI Host Adapter represents the pinnacle of SPI interface technology, specifically engineered for applications demanding maximum performance and reliability. Operating at speeds up to 40+ MHz, this professional-grade adapter delivers the performance required for modern embedded system development and production programming environments.\u003c\/p\u003e\n\u003ch4\u003eAdvanced Architecture and Performance\u003c\/h4\u003e\n\u003cp\u003eThe Cheetah adapter's pipelined architecture enables continuous, gapless data shifting that maximises throughput whilst maintaining precise timing control. This advanced design eliminates the performance bottlenecks common in traditional SPI interfaces, delivering sustained data rates that approach the theoretical maximum of the SPI clock frequency.\u003c\/p\u003e\n\u003cdiv class=\"tbl\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPI Clock Range\u003c\/td\u003e\n\u003ctd\u003e0.1 MHz to 40+ MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Overclocking\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz (experimental)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlave Select Lines\u003c\/td\u003e\n\u003ctd\u003e3 independent (SS1, SS2, SS3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Interface\u003c\/td\u003e\n\u003ctd\u003eHigh-Speed USB 2.0 (480 Mbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget Power Supply\u003c\/td\u003e\n\u003ctd\u003e+5V, 25mA maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4\u003eComprehensive Software Ecosystem\u003c\/h4\u003e\n\u003cp\u003eThe Cheetah adapter includes a complete software suite designed to maximise productivity across the entire development lifecycle. Flash Center Software provides professional-grade memory programming capabilities with support for hundreds of SPI flash and EEPROM devices through an extensible XML-based parts library.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e\n\u003ch4\u003eGang Programming Capability\u003c\/h4\u003e\n\u003cp\u003eConnect multiple Cheetah adapters to a single computer for parallel programming operations, dramatically reducing production line cycle times whilst maintaining programming reliability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eWiring Quick-Start\u003c\/h4\u003e\n\u003cp\u003eThe Cheetah adapter connects to target systems via a standard 10-pin ribbon cable with 2.54mm (0.1\") pitch IDC connector. The pin assignment follows industry standards for maximum compatibility:\u003c\/p\u003e\n\u003cdiv class=\"tbl\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eSS2\u003c\/td\u003e\n\u003ctd\u003eSlave Select 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround Reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eSS3\u003c\/td\u003e\n\u003ctd\u003eSlave Select 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eNC\/+5V\u003c\/td\u003e\n\u003ctd\u003eTarget Power (Optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eMISO\u003c\/td\u003e\n\u003ctd\u003eMaster In, Slave Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eNC\/+5V\u003c\/td\u003e\n\u003ctd\u003eTarget Power (Optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eSCLK\u003c\/td\u003e\n\u003ctd\u003eSerial Clock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eMOSI\u003c\/td\u003e\n\u003ctd\u003eMaster Out, Slave In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eSS1\u003c\/td\u003e\n\u003ctd\u003ePrimary Slave Select\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround Reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"imgph\"\u003e\u003c\/div\u003e\n\u003ch4\u003eEssential Wiring Considerations\u003c\/h4\u003e\n\u003cp\u003eProper grounding is critical for reliable operation. Connect both ground pins (2 and 10) to establish a solid ground reference between the Cheetah adapter and target system. The adapter provides optional +5V target power on pins 4 and 6, capable of supplying up to 25mA for low-power target devices.\u003c\/p\u003e\n\u003ch4\u003eProgramming Example Code\u003c\/h4\u003e\n\u003cp\u003eThe following Python example demonstrates basic SPI communication using the Cheetah API:\u003c\/p\u003e\n\u003cpre\u003e\u003ccode\u003eimport cheetah_py as ch # Open Cheetah adapter handle = ch.ch_open(0) if handle \u0026lt;= 0: print(\"Unable to open Cheetah adapter\") exit() # Configure SPI mode and bitrate ch.ch_spi_configure(handle, ch.CH_SPI_POL_RISING_FALLING, ch.CH_SPI_PHASE_SAMPLE_SETUP, ch.CH_SPI_BITORDER_MSB, 0x0) ch.ch_spi_bitrate(handle, 10000) # 10 MHz # Clear command queue and setup transaction ch.ch_spi_queue_clear(handle) ch.ch_spi_queue_oe(handle, 1) # Enable outputs ch.ch_spi_queue_ss(handle, 0x1) # Assert SS1 ch.ch_spi_queue_byte(handle, 1, 0x9f) # Send READ ID command ch.ch_spi_queue_byte(handle, 3, 0x00) # Read 3 bytes response ch.ch_spi_queue_ss(handle, 0x0) # Deassert SS1 # Execute transaction (ret, data_in) = ch.ch_spi_batch_shift(handle, 0) print(f\"Device ID: {data_in:02x} {data_in:02x} {data_in:02x}\")[1][2][3] ch.ch_close(handle)\u003c\/code\u003e\u003c\/pre\u003e\n\u003ch4\u003eFlash Memory Programming Workflow\u003c\/h4\u003e\n\u003cp\u003eProgramming SPI flash memory with the Cheetah adapter and Flash Center Software follows a streamlined workflow optimised for both development and production environments:\u003c\/p\u003e\n\u003col class=\"spec-note\"\u003e\n\u003cli\u003eConnect target flash device via ribbon cable\u003c\/li\u003e\n\u003cli\u003eLaunch Flash Center Software and detect adapter\u003c\/li\u003e\n\u003cli\u003eSelect memory device from extensive parts library\u003c\/li\u003e\n\u003cli\u003eLoad programming data (binary, hex, or S-record formats)\u003c\/li\u003e\n\u003cli\u003eExecute erase, program, and verify sequence\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"callout\"\u003e\n\u003ch5\u003ePerformance Benchmark\u003c\/h5\u003e\n\u003cp\u003eThe Cheetah adapter can erase, program, and verify a typical 1MB SPI flash memory in approximately 23 seconds, with the main limitation being the flash memory's page commit time rather than the adapter's transfer speed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eDevelopment Environment Integration\u003c\/h4\u003e\n\u003cp\u003eCross-platform API support enables seamless integration into existing development workflows. The Cheetah API provides comprehensive control over all adapter functions, with example code available for C\/C++, Python, C#, and LabVIEW development environments.\u003c\/p\u003e\n\u003cp\u003eFor automated testing and production environments, XML batch scripting capabilities in Control Center Serial Software enable complex test sequences to be executed without manual intervention, improving both efficiency and repeatability.\u003c\/p\u003e\n\u003ch4\u003eQuality and Compliance\u003c\/h4\u003e\n\u003cp\u003eManufactured to professional standards with CE, REACH, and RoHS compliance, the Cheetah adapter meets international regulatory requirements for professional and industrial applications. Each unit includes a comprehensive one-year warranty backed by Total Phase's professional support team.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317403325,"sku":"TP280121","price":475.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp280121-total-phase-cheetah-spi-host-adapter-tp280121-debug-store-uk-42654128275679.png?v=1717575587"},{"product_id":"superpro-6000-universal-programmer-xeltek-uk","title":"Xeltek SuperPro 6000 Fast Universal Programmer","description":"\u003ch3\u003e\u003cstrong\u003eUSB Interfaced Ultra-Fast 144pin Stand-Alone Universal Programmer\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e88,000+ \u003c\/strong\u003edevices supported by \u003cstrong\u003e314 IC Manufacturers\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003eARM9 32 Bit MCU + Linux for algorithm processing.\u003c\/li\u003e\n    \u003cli\u003eSupports \u003cstrong\u003eNAND \u003c\/strong\u003e\/ \u003cstrong\u003eeMMC \u003c\/strong\u003edevices up to \u003cstrong\u003e256 GB \u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003eStand-alone (no PC required) and PC hosted mode.\u003c\/li\u003e\n    \u003cli\u003eBuilt-in 144 universal pin-driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eExpanded Features\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eSupport devices with Vcc from 1.2V - 5V.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e30% faster-programming speed \u003c\/strong\u003ecompared to SuperPro-5000 with \u003cstrong\u003eARM9 MCU Processor + Linux ultra-fast algorithm processing engine\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003eSupport files up to \u003cstrong\u003e256 GBytes\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003eBuilt with \u003cstrong\u003e144 universal pin-drivers. \u003c\/strong\u003eUniversal adapters are available for various package types up to 144 pins. More efficient for new device support.\u003c\/li\u003e\n    \u003cli\u003eStand-alone mode (No PC required) and PC hosted mode.\n    \u003cul\u003e\n        \u003cli\u003eUnder PC hosted mode the programmer is controlled by a PC via USB2.0 (high speed) to program a chip.\u003c\/li\u003e\n        \u003cli\u003eUnder stand-alone mode, the programmer is controlled via the 6-KEY keypad and the 20 characters 4 line LCD display.\u003c\/li\u003e\n        \u003cli\u003eA CF (compact flash) card is used to store the project files.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003eCluster 1-15 units for flexible volume production. Operate multiple units to construct a concurrent multi-programming system.\u003c\/li\u003e\n    \u003cli\u003eOver-current and over-voltage protection for safety of the chip and programmer hardware.\u003c\/li\u003e\n    \u003cli\u003eCompatible with Windows XP \/ Vista \/ 7 \/ 8 (32\/64 bit)\u003c\/li\u003e\n    \u003cli\u003eOnly IC manufacturer approved programming algorithms are used for high reliability.\u003c\/li\u003e\n    \u003cli\u003eVcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.\u003c\/li\u003e\n    \u003cli\u003eAdvanced and powerful software functions:\n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eProduction mode\u003c\/strong\u003e starts chip operation the moment the chip is inserted properly.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eProject \u003c\/strong\u003e\u003cstrong\u003efunction \u003c\/strong\u003esimplifies processes such as Device Selection, File Loading, Device Configuration Setting, Program Option, and Batch File Setting into one step.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ePassword \u003c\/strong\u003efor project files can be set for volume production control\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eBatch \u003c\/strong\u003ecommand combines device operations like Program, Verify,and Security into a single command at any sequence.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eSerial numbers generators \u003c\/strong\u003eare available as standard or customer-specific functions. A Log file is useful for quality tracking. \u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Xeltek, Inc","offers":[{"title":"Default Title","offer_id":37768320549053,"sku":"SuperPro-6000","price":935.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/xeltek-inc-programmer-xeltek-superpro-6000-fast-universal-programmer-23152153198781.jpg?v=1685148044"},{"product_id":"xeltek-superpro-is01-in-system-programmer-uk","title":"Xeltek SuperPro IS01 High-Performance In-System Programmer","description":"\u003cp\u003e \u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cul\u003e\n    \u003cli\u003eResearch and development applications\u003c\/li\u003e\n    \u003cli\u003eVolume production: Devices may be programmed after the board is fully assembled. One example is the serial number writing to an on-board serial device\u003c\/li\u003e\n    \u003cli\u003eField application: Comes with portability, stand-alone mode and mobile data storage media (SD card), it is suitable for field test, debug and data acquisition\u003c\/li\u003e\n    \u003cli\u003eThird-party Integration: Friendly software interface (DLL and Virtual Com communication command set) and the hardware interface (ATE and USB) are provided and make it very easy for you to integrate Superpro IS01 as a functional module into your system. One example is ICT equipment; with this integration, you can complete the in-circuit test and in-circuit programming in one step.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMultiple Ways to Control SuperPro IS01\u003c\/h2\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek ISP Device Support\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/ispdevices.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-isp-device-support.png?v=1692444525\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eLargest ISP Device Library \u003c\/strong\u003eLocated in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro IS01 currently supports more than 10,000 devices, which is the largest device library in the serial programming industry. SuperPro IS01 supports all common ISP protocols such as I2C, SPI, UART, BDM, MW, JTAG, CAN and RS232.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 Programmer Long Cable\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/ispcable.png?1471969895924\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-long-cable.png\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eLonger Cable Length - Supported with Adjustable Speed \u003c\/strong\u003eFor industrial applications, numerous problems arise if in-system programming (ISP) is done with a parallel programmer via an ISP header. Parallel programmers restrict the target board to be programmed at a particular distance (usually less than a couple of inches). SuperProIS01 is a serial programmer with an ISP cable that can program a target board up to 3 feet (1M) in distance. Besides the cable line driveability for long-distance applications, the advanced in-system driver allows operating speed to be adjusted for execution timing purposes. VDD (0-5.5V \/0.5A) and Vpp (0-15V \/ 0.2A) lines were provided to power the target board and the target devices.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 Programmer for Mass Production - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/massproduction.png?1471969975676\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-mass-production.png?v=1692444814\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eMass Production Mode \u003c\/strong\u003eSuperPro IS01 has a working mode called \"mass production\", that is, once the programmer detects that the target board is ready and receives an ISP signal, it immediately starts the functional operation defined by AUTO without keyboard operation. TPIN and TPOUT in the ISP port are provided for this purpose. TPOUT supplies a high level, and TPIN is the level detection input line. If these points are short-circuited on the target board, once the ISP signal is applied to the test point, TPIN immediately detects a high level, and AUTO command sequence can be started.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/multiprogramming.png?1471969261011\" src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/multiprogramming.png?1471969261011\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eMultiprogramming \u003c\/strong\u003eUp to 12 programmers can be connected to a single PC for programming multiple PCBs or all the programmers can be used in stand-alone mode.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 Technmical Support - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/technicalsupport.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-technical-support.png?v=1692444968\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eTechnical Support \u003c\/strong\u003eXeltek is proud to offer same-day support for technical and sales inquiries. We are available to help customers and representatives resolve issues or help with their requests in an effective way. This service is provided by our highly qualified new support team that will provide the best of their knowledge to bring prompt sales and technical support.\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cimg alt=\"Xeltek IS01 In-System Programmer Software Features\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/software1.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-software-features.png\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eAdvanced Software Features\u003c\/h2\u003e\n\n\u003cp\u003eSuperPro IS01 comes with powerful and easy to use programming software. The biggest advantage is its simplicity so that any operator can operate the programmer with little or no training. SuperPro IS01 software is supported on Windows Vista, 7, 8, and 10.\u003c\/p\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 Programmer Project Files\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/Johnny\/project%20files.png?1521580080135\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-project-files.png\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eProject Files \u003c\/strong\u003eThe project file stores preparations before programming. Users could also restore and save work environment. The project file includes device type, buffer data, operation option settings, configuration bit settings and batch commands. Project files may be password protected to increase security and reliability when operated by untrained operators.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 Programmer Project Groups - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/projectgroups.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-0s01-project-groups.png\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eProject Group: Operate Multiple Project Files in Batch Mode \u003c\/strong\u003eMultiple chips could be programmed simultaneously using the Project Group feature on the SuperPro IS01 software. Project Group organizes batch running of multiple projects and is available on all SuperPro ISP models.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 Programmer Autorun Functions - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/autofunction.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-autorun-functions.png\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eAuto Function \u003c\/strong\u003eThe Auto function organizes different functions into a sequential group (erase, blank check, program, verify and protect). Functions are executed in sequential order similar to a batch command.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 In-System Programmer Statistics - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/statistics.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-programmer-statistics.png\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eProduction Statistics \u003c\/strong\u003eA log file could be used to save operation information before exiting the program. Log files can also be used to facilitate quality tracking.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 In-System Programmer Factory Modse - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/factorymode.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-programmer-factory-mode.png\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eFactory Mode \u003c\/strong\u003eThis mode is designed for factory volume production. To prevent operation errors from destroying chips and wrong data written to the chip, SuperPro will operate in the Auto function mode.The administrator can set a password to prevent unauthorized access to the system.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 In-System Programmer - X-Player - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/xplayer.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-programmer-x-player.png\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eXPlayer \u003c\/strong\u003eSuperPro IS01 supports JAM, SVF and Staple files from ACTEL, Xilinx and ALTERA. SuperPro IS01 also supports Direct C files from ACTEL. STP or JAM files can be generated using design tools such as ISE and Quartus II.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 In-System Programmer Labview Support - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/labview.png?1471909716548\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-programmer-labview.png\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eLabVIEW \u003c\/strong\u003eIntegrating SuperPro IS01 onto an existing LabVIEW environment is a simple task. Previously, users had to purchase DLL functions and create a set of custom VIs for integration, taking days and resulting in expensive engineering time. The LabVIEW driver package is ready to be used in the test program with very little need of coding and customization. Standard LabVIEW driver is available for download.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 In-System Programmer Auto File Recognition - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/recognition.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-programmer-auto-file-recognition.png\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eAuto Recognition of File \u003c\/strong\u003e\u003cstrong\u003eTypes \u003c\/strong\u003eWe support almost all kinds of known file-formats including file formats with automatic recognition functions: Binary, Intel (linear \u0026amp; segmented) Hex, Motorola S, Tektronix (linear \u0026amp; segmented), JEDEC, POF, etc.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 In-System Programmer Auto Serial Number Generation - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/autoincrement.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-programmer-serial-numbers.png?v=1692447034\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eAuto Increment of Serial Numbers \u003c\/strong\u003eAuto-generation of electronic serial numbers is available on Superpro IS01. This feature is implemented by setting Auto Increment in Operation Option. Auto Increment allows users to add a unique serial number to the device. After each successful programming, the software automatically changes the value by the specified increment mode.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cimg alt=\"Xeltek IS01 In-System Programmer IP Protection - Debug Store UK\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/www.xeltek.com\/images\/companies\/1\/softwarefeatures\/protection.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/xeltek-is01-programmer-ip-protection.png\"\u003e\u003c\/td\u003e\n            \u003ctd\u003e\n\u003cstrong\u003eIntellectual Property Protection \u003c\/strong\u003ePassword settings are available in both PC and stand-alone mode.\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ccenter\u003e\n\u003cp\u003eCertificates\u003c\/p\u003e\n\n\u003ch3\u003e\n\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/xeltek.com\/ximages\/ce_icon.gif\" src=\"http:\/\/xeltek.com\/ximages\/ce_icon.gif\"\u003e \u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/xeltek.com\/ximages\/rohs_icon.gif\" src=\"http:\/\/xeltek.com\/ximages\/rohs_icon.gif\"\u003e \u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/xeltek.com\/ximages\/iso_9001_icon.gif\" src=\"http:\/\/xeltek.com\/ximages\/iso_9001_icon.gif\"\u003e \u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"http:\/\/xeltek.com\/ximages\/iso_14001_icon.gif\" src=\"http:\/\/xeltek.com\/ximages\/iso_14001_icon.gif\"\u003e\n\u003c\/h3\u003e\n\n\u003ch2\u003e \u003c\/h2\u003e\n\n\u003ch2 class=\"text-align-left\"\u003eHardware \u0026amp; Electrical Specifications\u003c\/h2\u003e\n\n\u003cul\u003e\n    \u003cli class=\"text-align-left\"\u003eSupports all common ISP protocols (i.e. I2C, SPI, UART, BDM, MW, JTAG, CAN, RS232). Contact Xeltek for more details\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eProvides VDD (0.5A) output line and VPP(0.2A)\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eOperating Temperature 10-50ºC\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eESD protection - I\/O level is adjusted via SuperProIS01 software (1.5V ~ 4V)\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eOnline software operates the programmer and manages offline projects via USB2.0\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eWhen operated offline, operations are shown through the built-in LCD screen, keypad and LED status indicator.\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eProject files could be stored using a removable SD card (Max. 4GB)\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eThe ATE interface allows operating and controlling the programmer through external signals. There are six project selection lines (SEL0 - SEL5), two command input lines (START and STOP) and three status output lines (PASS, FAIL and BUSY). External signals are isolated from the system from optocouplers\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003e12V DC \/ 2A system external power input\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 class=\"text-align-left\"\u003eExpanded Features\u003c\/h2\u003e\n\n\u003cul\u003e\n    \u003cli class=\"text-align-left\"\u003eHigh programming speed selectable: Adapt to cable length and load feature for your target board.\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eSupports online (USB2.0 high-speed) and offline mode simultaneously.\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eSupports all common ISP protocols (i.e. I2C, SPI, UART, BDM, MW, JTAG, CAN, RS232).\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eContains Automatic Test Equipment (ATE) interface for automated operation.\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eBuilt-in overcurrent protection function.\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eField-proven for R\u0026amp;D, mass production and individual in-system programming projects.\u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eThe programmer operates in either PC hosted mode or stand-alone mode.\n    \u003cul\u003e\n        \u003cli\u003eUnder PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection for device programming.\u003c\/li\u003e\n        \u003cli\u003eUnder stand-alone mode, the user controls the programmer via a built-in LCD screen and keypad.\u003c\/li\u003e\n        \u003cli\u003eAn SD card stores project files.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli class=\"text-align-left\"\u003eCompatible with Windows XP \/ Vista \/ 7 \/ 8 \/ 10 (32\/64 bit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/center\u003e","brand":"Xeltek, Inc","offers":[{"title":"Default Title","offer_id":37768320614589,"sku":"SuperPro-IS01","price":1145.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/xeltek-inc-programmer-xeltek-superpro-is01-high-performance-in-system-programmer-30219321540797.jpg?v=1685218792"},{"product_id":"superpro-6000e-universal-programmer-xeltek-uk","title":"Xeltek SuperPro 6000E Ultra-Fast Universal Programmer","description":"\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n    \u003cli\u003eSupports ------- IC devices from ---- manufacturers as of ----.\u003c\/li\u003e\n    \u003cli\u003ePrograms devices with Vcc as low as 1.2V.\u003c\/li\u003e\n    \u003cli\u003eUltra-fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds.\u003c\/li\u003e\n    \u003cli\u003eBuilt with 144 universal pin-drivers for support of today's most complex devices. Universal and device-independent socket adapters are available for various packages up to 144 pins.\u003c\/li\u003e\n    \u003cli\u003eThe programmer operates in either PC hosted mode or stand-alone mode.\n    \u003cul\u003e\n        \u003cli\u003eUnder PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.\u003c\/li\u003e\n        \u003cli\u003eUnder stand-alone mode, the user controls the programmer via\u003cbr\u003e\n        20-characters, 4-line LCD display with 6-KEY\u003c\/li\u003e\n        \u003cli\u003eA CF (compact flash) card stores the project files.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003eISP\/ICP programming capability through optional ISP\/ICP adapter.\u003c\/li\u003e\n    \u003cli\u003eIn stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.\u003c\/li\u003e\n    \u003cli\u003eOver-current and over-voltage protection for safety of the chip and programmer hardware.\u003c\/li\u003e\n    \u003cli\u003eCompatible with Windows 7 \u0026amp; Vista \u0026amp; XP 32\/64 bit\u003c\/li\u003e\n    \u003cli\u003eOnly IC manufacturer approved programming algorithms provide high reliability.\u003c\/li\u003e\n    \u003cli\u003eVcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.\u003c\/li\u003e\n    \u003cli\u003eIncludes the following advanced and powerful software functions:\n    \u003cul\u003e\n        \u003cli\u003eChip operation starts immediately upon proper chip insertion in Production Mode.\u003c\/li\u003e\n        \u003cli\u003eProject function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.\u003c\/li\u003e\n        \u003cli\u003ePassword protection provides security for project files and production volume control.\u003c\/li\u003e\n        \u003cli\u003eBatch command combines device operations like program, verify, security into a single command at any sequence.\u003c\/li\u003e\n        \u003cli\u003eSerial number generators are available as standard or customer-specific functions.\u003c\/li\u003e\n        \u003cli\u003eA Log file provides production quality tracking.\u003c\/li\u003e\n        \u003cli\u003eCE and RoHS Compliant\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDevices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic\u003c\/li\u003e\n    \u003cli\u003ePackage: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP\u003c\/li\u003e\n    \u003cli\u003ePC interface: USB2.0 (High speed)\u003c\/li\u003e\n    \u003cli\u003eStand-alone memory: Compact FLASH Card\u003c\/li\u003e\n    \u003cli\u003ePower supply: AC Adapter: Input AC 100V- 240V; Output: 12V\/1.5A\u003c\/li\u003e\n    \u003cli\u003eMain unit: Dimensions 148(L) * 216(W) * 94(h) mm; Weight 3.5 lbs (1.6 Kg)\u003c\/li\u003e\n    \u003cli\u003ePackage: Dimensions 301(L) * 252(W) * 145(H) mm; Weight 6.2 lbs (2.8Kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Xeltek, Inc","offers":[{"title":"Default Title","offer_id":37768322580669,"sku":"SuperPro-6000E","price":880.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/xeltek-inc-programmer-xeltek-superpro-6000e-ultra-fast-universal-programmer-23152153460925.jpg?v=1685062190"},{"product_id":"dediprog-starprog-u-universal-programmer-uk","title":"Dediprog StarProg-U Engineering Universal IC Programmer","description":"","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":37768324022461,"sku":"StarProg-U","price":745.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/dediprog-technology-co-ltd-programmer-starprog-u-engineering-universal-programmer-29818513326269.jpg?v=1685116922"},{"product_id":"sku-018-02-easy-loader-amfeltec-uk","title":"Amfeltec SKU-018-02 Easy Loader Programmer","description":"\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003eThe In-Circuit Programmer\/Loader (\u003cstrong\u003eEasyLoader \u003c\/strong\u003eor \u003cstrong\u003eeLoader\u003c\/strong\u003e) is a standalone device that was designed to provide a flexible and cost-effective solution for electronic device manufacturers, as well as for hardware design companies and their customers. It allows you to upgrade code on any JTAG\/SPI\/I2C compliant device (like FPGA\/CPLD\/EEPROM\/Flash, etc.) or Microcontrollers at any time of development, testing or production.\u003c\/p\u003e\n\u003cp\u003eIts small size and ease of use make the \u003cstrong\u003eeLoader\u003c\/strong\u003e a unique device for the electronics manufacturing industry. Practically anyone can use it without making any mistakes. Once configured using a PC, it can be repeatedly used for a particular electronic product. An intuitive red\/green LED interface indicates the operation status, making it ideal for a manufacturing line environment. Eliminate the need to pre-program (before assembly) as code releases can be loaded momentarily — just before a manufactured device is shipped to a customer.\u003c\/p\u003e\n\u003cp\u003eUpon initial configuration, the \"eLoader\" functions as a completely standalone device that does not require connection to a host PC, power cable or batteries.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003ch3\u003eBoard Assembly House\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eeLoader\u003c\/strong\u003e can be used in a board assembly house to program the programmable logic devices as they come off the assembly line. It's easy to use, so minimal training is required for the personnel. After initial configuration, the device does not require a computer connection for normal operation. This can help you completely avoid pre-programming parts and first article sign off, and as a result you can significantly reduce production costs.\u003c\/p\u003e\n\u003ch3\u003eUpdate Firmware Prior to Shipping\u003c\/h3\u003e\n\u003cp\u003eBoards can be programmed just prior to shipping to the customer. This ensures that only the latest firmware will be used. It also adds further flexibility, because a board can be programmed with different security\/capability settings based on the particular customer order. There's no need to stock boards with different firmware; instead, program each board as the order comes in.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv lang=\"en-us\" xml:lang=\"en-us\"\u003e\n\u003ciframe frameborder=\"0\" allowfullscreen=\"1\" title=\"YouTube video player\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/b_K50t63YOc?controls=0\u0026amp;modestbranding=1\u0026amp;rel=0\u0026amp;showinfo=0\u0026amp;loop=0\u0026amp;hl=en\u0026amp;iv_load_policy=1\u0026amp;wmode=transparent\u0026amp;enablejsapi=1\u0026amp;origin=https%3A%2F%2Fwww.amfeltec.com\u0026amp;widgetid=1\"\u003e\u003c\/iframe\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003ePlay Video\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eRemote Firmware Update\u003c\/h3\u003eThe compact size and ease of use make it possible to simply ship the \u003cstrong\u003eeLoader\u003c\/strong\u003e to customers. The \u003cstrong\u003eeLoader\u003c\/strong\u003e starts working after the power is turned on so it can be easily operated by anyone. There's no need to send an engineer overseas just to reprogram a customer's device or to ship a device back to the factory for an update or replacement.\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eEngineering\u003c\/h3\u003e\n\u003cp\u003eBecause the\u003cstrong\u003e eLoader\u003c\/strong\u003e doesn't need a computer for normal operation, it can be a very useful portable programming\/loading solution in the event that the debugging laboratory and engineering cubes are in different locations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Amfeltec Corp","offers":[{"title":"Default Title","offer_id":37768325365949,"sku":"SKU-018-02","price":208.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/amfeltec-corp-programmer-sku-018-02-easy-loader-programmer-30225611260093.jpg?v=1685068144"},{"product_id":"wice-spi-in-system-programmer-leap-electronic-uk","title":"Leap WICE-SPI In-System SPI Programmer","description":"\u003cp\u003eWICE-SPI In-System SPI Programmer.\u003c\/p\u003e","brand":"Leaptronix","offers":[{"title":"Default Title","offer_id":37768362721469,"sku":"WICE-SPI","price":137.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/leap-electronic-co-ltd-programmer-wice-spi-in-system-spi-programmer-29034885513405.jpg?v=1685063282"},{"product_id":"ronetix-peedi-programmer-uk","title":"Ronetix PEEDI Debugger","description":"","brand":"Ronetix Development Tools GmbH","offers":[{"title":"ARM \/ No","offer_id":39997717151933,"sku":"PGM-ARM","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"ARM \/ Yes","offer_id":39997717184701,"sku":"PD-ARM","price":1842.5,"currency_code":"GBP","in_stock":true},{"title":"ARM11 \/ No","offer_id":39997717545149,"sku":"PGM-ARM11","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"ARM11 \/ Yes","offer_id":39997717610685,"sku":"PD-ARM11","price":1535.41,"currency_code":"GBP","in_stock":true},{"title":"AVR32 \/ No","offer_id":39997718003901,"sku":"PGM-AVR32","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"AVR32 \/ Yes","offer_id":39997718036669,"sku":"PD-AVR32","price":1535.41,"currency_code":"GBP","in_stock":true},{"title":"BLACKFIN \/ No","offer_id":39997718462653,"sku":"PGM-BLACKFIN","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"BLACKFIN \/ Yes","offer_id":39997718528189,"sku":"PD-BLACKFIN","price":1535.41,"currency_code":"GBP","in_stock":true},{"title":"COLDFIRE \/ No","offer_id":39997718855869,"sku":"PGM-COLDFIRE","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"COLDFIRE \/ Yes","offer_id":39997718921405,"sku":"PD-COLDFIRE","price":1535.41,"currency_code":"GBP","in_stock":true},{"title":"CORTEX \/ No","offer_id":39997719281853,"sku":"PGM-CORTEX","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"CORTEX \/ Yes","offer_id":39997719347389,"sku":"PD-CORTEX","price":1535.41,"currency_code":"GBP","in_stock":true},{"title":"MIPS32 \/ No","offer_id":39997719707837,"sku":"PGM-MIPS32","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"MIPS32 \/ Yes","offer_id":39997719773373,"sku":"PD-MIPS32","price":1842.5,"currency_code":"GBP","in_stock":true},{"title":"MPC5500 \/ No","offer_id":39997720166589,"sku":"PGM-MPC5500","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"MPC5500 \/ Yes","offer_id":39997720232125,"sku":"PD-MPC5500","price":1842.5,"currency_code":"GBP","in_stock":true},{"title":"MPC8300 \/ No","offer_id":39997720658109,"sku":"PGM-MPC8300","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"MPC8300 \/ Yes","offer_id":39997720723645,"sku":"PD-MPC8300","price":1842.5,"currency_code":"GBP","in_stock":true},{"title":"MPC8500 \/ No","offer_id":39997720985789,"sku":"PGM-MPC8500","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"MPC8500 \/ Yes","offer_id":39997721018557,"sku":"PD-MPC8500","price":1842.5,"currency_code":"GBP","in_stock":true},{"title":"QORIQ \/ No","offer_id":39997721247933,"sku":"PGM-QORIQ","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"QORIQ \/ Yes","offer_id":39997721280701,"sku":"PD-QORIQ","price":1842.5,"currency_code":"GBP","in_stock":true},{"title":"XSCALE \/ No","offer_id":39997721542845,"sku":"PGM-XSCALE","price":1031.25,"currency_code":"GBP","in_stock":true},{"title":"XSCALE \/ Yes","offer_id":39997721575613,"sku":"PD-XSCALE","price":1842.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/ronetix-development-tools-gmbh-programmer-arm-europe-no-ronetix-peedi-programmer-30231625695421.jpg?v=1685041127"},{"product_id":"nuprog-e2-engineering-ufs-and-emmc-programmer-uk","title":"Dediprog NuProg-E2 Engineering UFS and emmC Programmer","description":"\u003cul\u003e\n    \u003cli\u003eHigh-Speed Programming\n    \u003cul\u003e\n        \u003cli\u003eBuilt-in high-speed processor to achieve high programming speed.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003eSupport UFS\/UMCP and eMMC\/eMCP programming\n    \u003cul\u003e\n        \u003cli\u003eUFS part (v2.0\/v2.1\/v3.0\/v3.1)\n        \u003cul\u003e\n            \u003cli\u003eSupport Descriptors, Attributes, Flags Setting\u003c\/li\u003e\n            \u003cli\u003eSupport LUN configured and advance setting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003c\/li\u003e\n        \u003cli\u003eeMMC part\n        \u003cul\u003e\n            \u003cli\u003eSupport User Area, Boot1\/2 Partition and Extend CSD\u003c\/li\u003e\n            \u003cli\u003eSupport RPMB, GPP1~4, and Enhanced mode\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003eSupport USB 2.0 and USB 3.0 (Using Power Adapter)\u003c\/li\u003e\n    \u003cli\u003eSupport Various Storage IC\n    \u003cul\u003e\n        \u003cli\u003eUFS, eMMC, MCU, SPI NOR, SPI NAND, Parallel NOR, Parallel NAND, EEPROM, CPLD, FPGA\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003eSupport All IC Package\n    \u003cul\u003e\n        \u003cli\u003eCSP, BGA, QFN, QFP, SOP, TSOP, SSOP, PLCC, DIP, etc.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003eSupport various file formats:\n    \u003cul\u003e\n        \u003cli\u003eBinary (bin\/rom), Intel Hex (h16\/h20\/hex), Motorola S19(mhx\/mot\/s19\/srec) and specific of MCU IC.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003eRegular software update\u003c\/li\u003e\n    \u003cli\u003eProgramming projects and sockets are compatible with NuProgPlus. (NuProg-E2 can share the socket with NuProgPlus, and NuProg-E2 only supports the upper socket of the Dual Socket.)\u003c\/li\u003e\n    \u003cli\u003eThe socket adaptors for NuProg-E2 and NuProg-E are not compatible.\u003c\/li\u003e\n    \u003cli\u003eSupport Windows 7\/8\/8.1\/10\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The socket adaptors for NuProg-E2 and NuProg-E are not compatible.\u003c\/p\u003e","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":40619525931197,"sku":"NuProg-E2","price":765.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/dediprog-technology-co-ltd-programmer-nuprog-e2-engineering-ufs-and-emmc-programmer-30207267012797.jpg?v=1685067233"},{"product_id":"dediprog-sf600plus-g2-spi-nor-flash-programmer","title":"Dediprog SF600Plus-G2 High-Speed SPI NOR\/NAND Flash Programmer","description":"\u003cp\u003eIntroducing the SF600Plus-G2 Serial NOR\/NAND Flash Programmer, a high-speed and versatile programming solution for developers and engineers. With both In-Circuit Programming and Standalone programming modes, the SF600Plus-G2 can update the SPI Flash soldered on board or the SPI Flash in the socket adaptor, making it an ideal solution for various programming needs.\u003c\/p\u003e\n\n\u003ch2\u003eUpgrade to SF600Plus-G2\u003c\/h2\u003e\n\n\u003cp\u003eThe SF600Plus-G2 is the upgraded version of the popular SF600 and SF600Plus models. It boasts improved programming efficiency thanks to its SOC architecture of FPGA. This upgrade means the SF600Plus-G2 has enhanced features and capabilities compared to its predecessors.\u003c\/p\u003e\n\n\u003ch2\u003eSPI NAND Support\u003c\/h2\u003e\n\n\u003cp\u003eOne of the standout features of the SF600Plus-G2 is its ability to support SPI NAND. This feature provides convenience for developers when programming and sets it apart from other Flash programmers on the market.\u003c\/p\u003e\n\n\u003ch2\u003eHigh-Speed and Volume Support\u003c\/h2\u003e\n\n\u003cp\u003eThe SF600Plus-G2 supports high-speed USB and high SPI performance. It also supports any volume of the SPI Flash on the market, making it a flexible and future-proof solution.\u003c\/p\u003e\n\n\u003ch2\u003eAdditional Features and Capabilities\u003c\/h2\u003e\n\n\u003cp\u003eThe SF600Plus-G2 has several features and capabilities that make it a powerful and user-friendly programmer. These include:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSupport for 1.2V low voltage IC\u003c\/li\u003e\n\t\u003cli\u003eStart button feature for batch programming when connected to the software\u003c\/li\u003e\n\t\u003cli\u003eSignal conflict protections\u003c\/li\u003e\n\t\u003cli\u003eMulti-Programmers Capability through USB\u003c\/li\u003e\n\t\u003cli\u003eProgrammer Index displays on the programmer\u003c\/li\u003e\n\t\u003cli\u003eSupport for 2 CS pins\u003c\/li\u003e\n\t\u003cli\u003eStand-Alone Mode with support for Start button programming and Control Port for removing control programming\u003c\/li\u003e\n\t\u003cli\u003eCompatibility with WIN8 and above\u003c\/li\u003e\n\t\u003cli\u003eCompatibility with both 32 and 64bit OS\u003c\/li\u003e\n\t\u003cli\u003eSupport for Single\/Dual Multiple Dies\u003c\/li\u003e\n\t\u003cli\u003eSupport for Single\/Dual\/Quad\/Octal IO\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUpgrade to SF600Plus-G2U\u003c\/h2\u003e\n\n\u003cp\u003eThe SF600Plus-G2 also has an upgrade option to SF600Plus-G2U, which includes additional features such as support for Universal Flash Storage (UFS), a new standard for high-capacity, high-performance flash memory.\u003c\/p\u003e","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":44008362311903,"sku":"SF600Plus-G2","price":375.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/dediprog-technology-co-ltd-programmer-dediprog-sf600plus-g2-spi-nor-flash-programmer-39575831380191.png?v=1684943384"},{"product_id":"dediprog-nuprogplus-u16-universal-gang-programmer-duplicator","title":"Dediprog NuProgPlus-U16 Universal Gang Programmer \u0026 Duplicator","description":"\u003ch2\u003eFully-Featured Production Programmer\u003c\/h2\u003e\n\n\u003cp\u003eThe Dediprog NuProgPlus-U8 has been designed using an advanced FPGA-kernel based architecture to ensure devices can be programmed at ultra-high speed from a device data file or copied from a pre-programmed device.\u003c\/p\u003e\n\n\u003ch2\u003eThe Widest Device, Interface and Package Support in the Market\u003c\/h2\u003e\n\n\u003ch3\u003eSupported Device Types\u003c\/h3\u003e\n\n\u003cp\u003eSupports standard and advanced storage devices including eMMC and UFS, in addition to SPI NOR, SPI NAND, Parallel NOR, Parallel NAND, and EEPROM.  Also programs MCUs. CPLDs and FPGAs.\u003c\/p\u003e\n\n\u003ch3\u003eDesigned For Production\u003c\/h3\u003e\n\n\u003cp\u003eOut of the box, eight devices - SPI Flash programming or eMMC\/UFS IC duplicated in parallel.  The programmer can be expanded to support up to sixteen devices.  In addition, the PC Programming Software supports multiple programmers connected to the same PC.\u003c\/p\u003e\n\n\u003cp\u003eThe programmer has also been designed for low-skilled operators by LCD Keypad operation in Stand-alone mode.\u003c\/p\u003e\n\n\u003ch3\u003eDevice Duplication\u003c\/h3\u003e\n\n\u003cp\u003eIf more convenient for you, devices can also be duplicated.  This can often be a time-saving process.  The following can be duplicated:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003eUFS data, LUN configuration, and Descriptors\/Attributes\/Flags. (\u003cstrong\u003eNote: \u003c\/strong\u003eRPMB duplication is not supported)\u003c\/li\u003e\n    \u003cli\u003eeMMC boot area, GPP, user area, and ExtCSD. (\u003cstrong\u003eNote: \u003c\/strong\u003eRPMB duplication is not supported)\u003c\/li\u003e\n    \u003cli\u003eDuplicate PCI-E SSD in different modes (Whole disk, selected partition with specific percentage)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProject Management\u003c\/h3\u003e\n\n\u003cp\u003eProject files are supported.  This feature makes it easier to manage multiple projects by being better organised:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003eIntegrates high speed storage to store project file or project folder for more stable and faster transmission.\u003c\/li\u003e\n    \u003cli\u003eProject download speed up to 100 MB\/s\u003c\/li\u003e\n    \u003cli\u003eProvision of a simple Start button to commence programming after loading the project file, so operator will not load the wrong image file or select the incorrect IC part number.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProductivity Features\u003c\/h2\u003e\n\n\u003cp\u003eThe programmer supports Manual Mode, Auto-Detection Mode and use with a Device Handler.\u003c\/p\u003e\n\n\u003ch2\u003eeMMC\/UFS Programming and Duplicating\u003c\/h2\u003e\n\n\u003ch2\u003e\u003cimg alt=\"eMMC\/UPS Programmer and Duplicator\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/old-www.dediprog.com\/upload_file\/download\/1094.png\"\u003e\u003c\/h2\u003e\n\n\u003ch2\u003eMCU\/Flash Programming\u003c\/h2\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"MCU\/Flash Programming\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/old-www.dediprog.com\/upload_file\/download\/1095.png\"\u003e\u003c\/p\u003e","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":44276888207583,"sku":"NuProgPlus-U16","price":7200.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/dediprog-technology-co-ltd-nuprogplus-u16-40235807473887.jpg?v=1689926518"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/lg-dediprog-nuprog-e2-angle.jpg?v=1724338115","url":"https:\/\/thedebugstore.com\/en-it\/collections\/memory-device-programmers.oembed","provider":"Debug Store","version":"1.0","type":"link"}