{"title":"Interface Boards","description":"\u003cp data-mce-fragment=\"1\"\u003eAn Interface Board, also known as an I\/O (Input\/Output) board, acts as a bridge between a computer or microcontroller and external devices. These boards enable the exchange of data, signals, and commands, allowing users to control and monitor various hardware components effortlessly.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur Interface Boards support a wide array of communication protocols, including UART, SPI, I2C, CAN, and USB. With features such as GPIO (General Purpose Input\/Output) pins, analogue and digital interfaces, and programmable logic, these boards empower you to interface with sensors, actuators, displays, and other peripherals effortlessly.\u003c\/p\u003e","products":[{"product_id":"proto-connect-2-board-mikroe-320-uk","title":"Proto Connect 2 Board","description":"\u003cp\u003eIntroduce a simple and convenient way of connecting multiple wires from power supply, communication, analog and\/or GPIO lines to a breakout board using the \u003cstrong\u003ePROTO Connect Board\u003c\/strong\u003e. This adapter board includes two connection pads in standard 100mil spacing and two screw terminals to meet the device requirements. It also has male header pins that can be soldered. This compact-sized and affordable board makes for a great choice for prototyping.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768335851709,"sku":"MIKROE-320","price":15.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-proto-connect-2-board-23151658336445.jpg?v=1685034823"},{"product_id":"icd-2-connector-board-mikroe-315-uk","title":"ICD2 Connector Board","description":"\u003cp\u003eEasily connect the ICD2\/ICD3 or Real ICE programmers\/debuggers to the prototyping device using the \u003cem\u003e\u003cstrong\u003eICD2 Connector Board\u003c\/strong\u003e\u003c\/em\u003e. It is offered with a loose 1x6 header connector that user can solder, when required. The single-row header and the RJ12 connector are wired one to one. This RJ12-type connector provides easy prototyping and considered suitable for use with solder-less breadboards. The RJ12 socket is wired to six pins to provide access to PGD, PGC and \/MCLR lines along with VCC and GND power connections.\u003c\/p\u003e\n\n\u003cp\u003eFeaturing a compact design, the \u003cstrong\u003eICD2 Connector Board\u003c\/strong\u003e works as a cost-effective solution to solve your connecting problems. The board is designed to perfectly fit into standard prototyping boards.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768336408765,"sku":"MIKROE-315","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-icd2-connector-board-30249297117373.jpg?v=1685197741"},{"product_id":"touch-panel-connector-board-mikroe-322-uk","title":"TouchPanel Connector Board","description":"","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768336474301,"sku":"MIKROE-322","price":1.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-touchpanel-connector-board-23151731769533.jpg?v=1685043475"},{"product_id":"mikroe-319-proto-connect-board-uk","title":"Proto Connect Board","description":"\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003ePROTO Connect Board\u003c\/strong\u003e\u003c\/em\u003e provides a convenient way of connecting eight wires from power supply, communication, analog or GPIO lines to the target breadboard. Board features eight screw terminals and eight connection pads in standard 100mil distance. Board is compact and cheap thus making is a good choice for prototyping.\u003c\/p\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eAdapter\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eBoard is used for connecting eight wires from power supply, communication, analog or GPIO lines to the target breadboard\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003eEight screw terminals and eight connection pads in standard 100mil distance\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eMicro screw terminals for eight wire connections\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eGPIO\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003eBreadboard (PROTO)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e3.3V or 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768336507069,"sku":"MIKROE-319","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-proto-connect-board-23151659155645.jpg?v=1685129685"},{"product_id":"smartproto-board-mikroe-197-uk","title":"SmartProto Board","description":"\u003cp\u003eIntended to aid easy and fast prototype development, the \u003cem\u003e\u003cstrong\u003eSmartPROTO Board\u003c\/strong\u003e\u003c\/em\u003e can be used to place additional components onto prototyping area and quickly assemble custom accessory board for a wide range of development systems from MikroElektronika. For this, this add-on board comes with female IDC10 connector and two prototyping areas. The first prototyping area includes eight lines with five prototyping pads, wherein each pad is connected to one IDC10 pin (D0-D7). The other prototyping area has 15 double lines each with five pads.\u003c\/p\u003e\n\n\u003cp\u003eThis add-on board also has additional power lines for the components. On the outer edges of the board, it features a line for GND and a line of pads for VCC. The\u003cstrong\u003e SmartPROTO Board\u003c\/strong\u003e is also designed to be compatible with the port expansion headers on MikroElektronika\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768336703677,"sku":"MIKROE-197","price":5.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-smartproto-board-29669425381565.jpg?v=1685117983"},{"product_id":"easypull-board-1k-mikroe-575-uk","title":"EasyPULL 1K Board","description":"\u003cp\u003eThe \u003cstrong\u003eEasyPULL Board\u003c\/strong\u003e is an add-on board that comprises of 8 pull-up\/pull-down resistors. The board comes with 1K Ω resistors. A version with 10K Ω resiostors is available. The pull-up or pull-down selection is done via jumpers and the selection is made by simple jumper moving in Up and Down positions. The EasyPULL Board can be used to fix an input pin to a known state if no input is present. It is ideal for protecting the input pin and fixing the input pin at a valid voltage level. It can provide voltage levels to PORT pins, and is very convenient to use when pins are used as inputs, as they need to have predefined logic states. The board features an on-board IDC10 connector and extension pins that enable user to easily connect to external electronic circuits.\u003c\/p\u003e\u003cp\u003eCompatible with EasyLED Board, these board can be used in combination to serve the requirement in various types of applications. In this way, users can tie the device pin to VCC or GND via resistors and have visual indication of output signals through a LED.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768336736445,"sku":"MIKROE-575","price":9.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easypull-board-1k-30253410123965.jpg?v=1685220422"},{"product_id":"mikroe-576-easypull-board-10k-uk","title":"EasyPULL 10K Board","description":"\u003cp\u003eThe \u003cstrong\u003eEasyPULL Board\u003c\/strong\u003e is an add-on board that comprises of 8 pull-up\/pull-down resistors. The board comes with 10K Ω resistors. A version with 1K Ω resiostors is available. The pull-up or pull-down selection is done via jumpers and the selection is made by simple jumper moving in Up and Down positions. The EasyPULL Board can be used to fix an input pin to a known state if no input is present. It is ideal for protecting the input pin and fixing the input pin at a valid voltage level. It can provide voltage levels to PORT pins, and is very convenient to use when pins are used as inputs, as they need to have predefined logic states. The board features an on-board IDC10 connector and extension pins that enable user to easily connect to external electronic circuits.\u003c\/p\u003e\u003cp\u003eCompatible with EasyLED Board, these board can be used in combination to serve the requirement in various types of applications. In this way, users can tie the device pin to VCC or GND via resistors and have visual indication of output signals through a LED.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768336769213,"sku":"MIKROE-576","price":9.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easypull-board-10k-28872980889789.jpg?v=1685156697"},{"product_id":"easyconnect-board-mikroe-128-uk","title":"EasyConnect Board","description":"\u003cp\u003eThe \u003cstrong\u003eEasyConnect Board\u003c\/strong\u003e is an accessory board that provides an easy access to the MCU pins via screw terminals. This additional board features on-board screw-terminated connectors that can handle solid and stranded wires. These connectors enable eight wires to be easily connected or removed. Featuring modular configuration, it permits several wires to be connected or removed with one operation.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eEasyConnect Board\u003c\/strong\u003e has a female IDC10 connector that provides easy way to connect the peripheral devices to the development system. This additional board is designed to operate in a wide range of power supply range (from 2.7V to 5V). Featuring compatible headers already installed on MikroElektronika.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768337785021,"sku":"MIKROE-128","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easyconnect-board-30257222123709.jpg?v=1685212489"},{"product_id":"easyconnect-2-board-mikroe-194-uk","title":"EasyConnect2 Board","description":"\u003cp\u003eThe \u003cstrong\u003eEasyConnect 2 Board\u003c\/strong\u003e is an accessory board that provides an easy access to the MCU pins via screw terminals. This additional board features on-board small screw-terminated connectors that can handle solid and stranded wires. These connectors enable eight wires to be easily connected or removed. Featuring modular configuration, it permits several wires to be connected or removed with one operation.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eEasyConnect2 Board\u003c\/strong\u003e has a female IDC10 connector that provides easy way to connect the peripheral devices to the development system. This additional board is designed to operate in a wide range of power supply range (from 2.7V to 5V). Featuring compatible headers already installed on MikroElektronika.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768337817789,"sku":"MIKROE-194","price":3.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easyconnect2-board-28876968394941.jpg?v=1685010721"},{"product_id":"easy-ps-2-board-mikroe-486-uk","title":"EasyPS\/2 Board","description":"\u003cp\u003eThe\u003cstrong\u003e EasyPS\/2 Board\u003c\/strong\u003e is a great way to add PS\/2 connectivity to your prototype, development board or final device. It features standard PS\/2 connector in metal shield and female IDC10 header compatible with mikroElektronika development boards. Additional DIP switches enable you to select DATA and CLOCK lines that match your target application. Board is clearly marked which helps facilitate connections.\u003c\/p\u003e\n\n\u003ch2\u003ePS\/2 Connector\u003c\/h2\u003e\n\n\u003cp\u003eThe PS\/2 connector is a 6-pin mini-DIN connector that allows connection between devices like keyboards and mice to a PC compatible computer system. Generally, purple PS\/2 ports are used to connect the keyboards while green PS\/2 ports are to be connect the mice.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The PS\/2 standard had been completely replaced by the faster and more flexible USB standard in consumer machines.\u003c\/p\u003e\n\n\u003cp\u003eVCC is on pin 9 of the IDC10 connector and GND on pin 10. The DIP switches enable the user to choose pins 1, 3, 5, and 7 for the DATA line (D0\/D2\/D4\/D6), and pins 2, 4, 6, and 8 for the CLK line (C1\/C3\/C5\/C7). This plug-in compatible board with I\/O port headers on various mikroElektronikas development systems also gives user with options for the design.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768337850557,"sku":"MIKROE-486","price":3.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easyps-2-board-28873003663549.jpg?v=1685156705"},{"product_id":"mikroprog-to-icd2-icd3-adapter-mikroe-791-uk","title":"MikroProg to ICD2 \u0026 ICD3 Adapter","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg to ICD2 \u0026amp; ICD3\u003c\/strong\u003e is an adapter board which allows you to connect mikroProgprogrammer and In-Circuit debugger to target board where only ICD2\/3 connector is available for programming. Board provides the necessary interface for stable and secure connection of PGC, PGD, RST, VCC and GND programming lines. Provided IDC10 header and RJ-12 connectors allow easy connections. No soldering, just plug-n-play! Board comes with ICD2\/3 cable.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768337883325,"sku":"MIKROE-791","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-adapter-mikroprog-to-icd2-icd3-adapter-29452646023357.jpg?v=1685132213"},{"product_id":"mikroe-1303-mikroprog-to-st-link-v2-adapter-uk","title":"MikroProg to ST-Link v2 Adapter","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg to ST-Link v2 Adapter\u003c\/strong\u003e allows you to connect mikroProg for STM32 programmer and hardware debugger to 20-pin male JTAG connector on your target board. The Adapter consists of one 2x10 male header and a 2x10 female socket. Its recommended to first place the adapter on 2x10 male header on the target board, and then plug in the mikroProg into the adapters 2x5 male header.\u003c\/p\u003e\n\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eAdapter\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eAdapter allows you to connect mikroProg for STM32 programmer and hardware debugger to 20-pin male JTAG connector on your target board\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003e2x10 male header and a 2x10 female socket\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eGPIO\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003eIDC10\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768337948861,"sku":"MIKROE-1303","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-adapter-mikroprog-to-st-link-v2-adapter-30237431660733.jpg?v=1685033743"},{"product_id":"easyinput-board-mikroe-1025-uk","title":"EasyInput Board","description":"\u003ch2\u003eElectrical characteristics of tri-state DIP switch\u003c\/h2\u003e\n\n\u003cp\u003eContact Rating: Switching: 25mA, 24VDC; Non-Switching: 100 mA, 50VDC.\u003c\/p\u003e\n\n\u003cp\u003eContact Resistance: Initial: 50 mOhm.\u003c\/p\u003e\n\n\u003cp\u003eMechanical Life: 5000 cycles (Min.) .\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768339882173,"sku":"MIKROE-1025","price":7.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easyinput-board-30257192501437.jpg?v=1685211779"},{"product_id":"mikroe-193-easyproto-board-uk","title":"EasyProto Board","description":"\u003cp\u003eThe\u003cem\u003e\u003cstrong\u003e EasyPROTO Board\u003c\/strong\u003e\u003c\/em\u003e is a complete, cost-effective solution to deal with all your connection difficulties. The board features 10 port pins, labelled as D0-D7, VCC, and GND. The \u003cstrong\u003eEasyPROTO Board\u003c\/strong\u003e includes 10 header pads on one end and a ribbon flat cable with 2x5-pin female IDC10 connector on the other. The ribbon cable is connected to some of the development system\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768339914941,"sku":"MIKROE-193","price":7.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easyproto-board-29669536235709.jpg?v=1685156694"},{"product_id":"mikroe-260-easytest-board-uk","title":"EasyTEST Board","description":"\u003ch2\u003eIDC10 Splitter Board\u003c\/h2\u003e\n\n\u003cp\u003eThe splitter for IDC10 connector splits a female 2x5-pin header into two 2x5-pin headers, connected in parallel. It aids in doubling the number of pins of single IDC10 header, and thus enable the user to monitor signals using oscilloscope probes while the PORT is in operation.\u003c\/p\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eAdapter\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eThe EasyTEST Board is an ideal solution for connecting your prototype or development board to oscilloscope or other monitoring devices\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003efemale and two male IDC10 connectors\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eFemale IDC10 connector is compatible with mikroE development boards\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eGPIO\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003eIDC10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e3.3V or 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768339947709,"sku":"MIKROE-260","price":7.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easytest-board-30253409042621.jpg?v=1685004601"},{"product_id":"mikroe-268-ps-2-connector-board-uk","title":"PS\/2 Connector Board","description":"\u003ch2\u003ePS\/2 Connector\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ePS\/2 Connector Board\u003c\/strong\u003e features a 6-pin round Personal System\/2 (PS\/2) connector used to connect peripheral devices, usually a mouse or keyboard, with a computer. Usually, they are available in two sizes, one with a diameter of about 1\/4-inch and other with a diameter of about 3\/8-inch. However, in the modern world, USB connectors have almost entirely replaced PS\/2 connectors as the primary means of hooking up computer devices.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768340373693,"sku":"MIKROE-268","price":24.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-ps-2-connector-board-23151661318333.jpg?v=1685128799"},{"product_id":"max232-board-mikroe-222-uk","title":"MAX232 Board","description":"\u003ch2\u003eIC\/Module: MAX232N Dual EIA-232 Drivers\/Receivers\u003c\/h2\u003e\n\n\u003cp\u003eThe integrated MAX232N is a dual EIA-232 driver\/receiver that operates from a single 5-V power supply and converts a serial signal from TTL to RS232C standard and vice versa through a built-in voltage generator. The two RS232 drivers interface standard logic level to RS232 levels while the two receivers interface RS232 levels to standard logic levels.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Connectors\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMAX232 Board \u003c\/strong\u003efeatures two connectors: a female connector DB9 and a 6-pin connector. While the former enables connection with devices that use RS232 standard (typically a PC), the latter allows for connection with microcontroller pins intended for serial communication (USART).\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768340799677,"sku":"MIKROE-222","price":9.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-max232-board-29669831999677.jpg?v=1685021683"},{"product_id":"eeprom-board-mikroe-88-uk","title":"EEPROM Board","description":"\u003ch2\u003eBoard Connection\u003c\/h2\u003e\u003cp\u003eThe EEPROM Board uses a 2x5 male header and 2x5 female header for connection between a development system and the microcontroller device. Every pin on DIP switch SW1 is connected to different pin of 2x5 female header.\u003c\/p\u003e\u003ch2\u003eOperating Voltage\u003c\/h2\u003e\u003cp\u003eThe EEPROM Board includes another SMD jumper that enable user to select the power supply between 3.3V and 5V.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768340897981,"sku":"MIKROE-88","price":9.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-eeprom-board-28877552976061.jpg?v=1685098009"},{"product_id":"easyled-board-with-red-leds-mikroe-571-uk","title":"EasyLED Board with Red LEDs","description":"\u003cp\u003eNow easily add LED signals to the design using the \u003cstrong\u003eEasyLED R Board\u003c\/strong\u003e. The EasyLED R Board is a cost-effective yet effective solution for visual indication of output signals. Featuring 8 surface mounted LEDs, the EasyLED Board is used to connect a development system port to LEDs. It features two IDC10 header connectors; one female header (CN2) and one male header (CN1). The user can connect a prototype device using its female IDC10 connector, or can be wired to your system using the make 2x5 pin header. These header connectors make EasyLED Board highly compatible with all development boards. The board supports 3.3V or 5V power supply voltage. This board is supplied with red LEDs. Alternative boards are available fitted with green and yellow LEDs.\u003c\/p\u003e\u003cp\u003eThe EasyLED Board is used to indicate the logic level on the development system ports. When a pin is driven high (logic 1), the appropriate LED connected to that pin gets illuminated. Similarly, if a pin is driven low (logic 0), the appropriate LED remains off.\u003c\/p\u003e\u003cp\u003eThe user can use the EasyLED board with EasyPULL board in order to provide the device pin to VCC or GND via resistors and have visual indication of output signals via LED.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768341061821,"sku":"MIKROE-571","price":10.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-display-easyled-board-with-red-diodes-28870609109181.jpg?v=1685157403"},{"product_id":"easyled-board-with-green-leds-mikroe-572-uk","title":"EasyLED Board with Green LEDs","description":"\u003cp\u003eNow easily add LED signals to the design using the \u003cstrong\u003eEasyLED G Board\u003c\/strong\u003e. The EasyLED Board is a cost-effective yet effective solution for visual indication of output signals. Featuring 8 surface mounted LEDs, the EasyLED Board is used to connect a development system port to LEDs. It features two IDC10 header connectors; one female header (CN2) and one male header (CN1). The user can connect a prototype device using its female IDC10 connector, or can be wired to your system using the make 2x5 pin header. These header connectors make EasyLED Board highly compatible with all development boards. The board supports 3.3V or 5V power supply voltage. This board is supplied with Green LEDs. Alternative boards are available fitted with red and yellow LEDs.\u003c\/p\u003e\u003cp\u003eThe EasyLED Board is used to indicate the logic level on the development system ports. When a pin is driven high (logic 1), the appropriate LED connected to that pin gets illuminated. Similarly, if a pin is driven low (logic 0), the appropriate LED remains off.\u003c\/p\u003e\u003cp\u003eThe user can use the EasyLED board with EasyPULL board in order to provide the device pin to VCC or GND via resistors and have visual indication of output signals via LED.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768341094589,"sku":"MIKROE-572","price":9.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lg-easyled-board.jpg?v=1724857236"},{"product_id":"easyled-board-with-yellow-leds-mikroe-573-uk","title":"EasyLED Board with Yellow LEDs","description":"\u003cp\u003eNow easily add LED signals to the design using the \u003cstrong\u003eEasyLED Y Board\u003c\/strong\u003e. The EasyLED Y Board is a cost-effective yet effective solution for visual indication of output signals. Featuring 8 surface mounted LEDs, the EasyLED Board is used to connect a development system port to LEDs. It features two IDC10 header connectors; one female header (CN2) and one male header (CN1). The user can connect a prototype device using its female IDC10 connector, or can be wired to your system using the make 2x5 pin header. These header connectors make EasyLED Board highly compatible with all development boards. The board supports 3.3V or 5V power supply voltage. This board is supplied with Yellow LEDs. Alternative boards are available fitted with red and green LEDs.\u003c\/p\u003e\u003cp\u003eThe EasyLED Board is used to indicate the logic level on the development system ports. When a pin is driven high (logic 1), the appropriate LED connected to that pin gets illuminated. Similarly, if a pin is driven low (logic 0), the appropriate LED remains off.\u003c\/p\u003e\u003cp\u003eThe user can use the EasyLED board with EasyPULL board in order to provide the device pin to VCC or GND via resistors and have visual indication of output signals via LED.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768341127357,"sku":"MIKROE-573","price":9.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-display-easyled-board-with-yellow-leds-30257173364925.jpg?v=1685212497"},{"product_id":"keypad-4x4-board-mikroe-86-uk","title":"Keypad 4x4 Board","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eKeypad 4x4 Board\u003c\/strong\u003e\u003c\/em\u003e features 16 push buttons arranged in 4x4 matrix to form standard alphanumeric keypad. Some embedded systems that require user input in form of numbers (decimal, or hexadecimal) can use this board as a solution. Board features flat cable with female IDC10 connector, compatible with mikroElektronika development boards.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768341717181,"sku":"MIKROE-86","price":10.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-keypad-4x4-board-23151520055485.jpg?v=1685144270"},{"product_id":"easybuzz-board-mikroe-478-uk","title":"EasyBuzz Board","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eEasyBuzz Board\u003c\/strong\u003e\u003c\/em\u003e features a Piezo Speaker capable of emitting audio signals. For the piezo buzzer to operate normally it is necessary to generate a voltage signal of specified frequency. Piezo buzzer's resonant frequency is 3.8kHz (where you can expect it's best performance), but frequencies ranging between 2kHz and 4kHz can also be used. Buzzer driver can be provided with digital signal, or pulse-width modulated signal, where sound pitch is determined by the PWM frequency, and sound volume can be adjusted by changing PWM duty cycle.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eEasyBuzz Board\u003c\/strong\u003e supports both 3.3V and 5V systems.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768341782717,"sku":"MIKROE-478","price":3.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-easybuzz-board-28870554910909.jpg?v=1685010899"},{"product_id":"mikroe-480-serialflash-proto-board-uk","title":"SerialFlash Proto Board","description":"\u003ch2\u003eIC\/Module: EN25F80 8 Mbit, low-voltage Serial Flash Memory\u003c\/h2\u003e\n\n\u003cp\u003eThe EN25F80 is a low-power, high performance serial flash memory that allows the microcontroller to use additional 8Mbit flash memory via high-speed SPI serial interface. It is backed with high performance program\/erase speed. It has 256 sectors of 4-Kbyte or 16 blocks of 64-Kbyte, where any sector or block can be erased individually. It can sustain a minimum of 100K program\/erase cycles on each sector.\u003c\/p\u003e\n\n\u003ch2\u003eBoard Connections\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSerialFlash PROTO Board\u003c\/strong\u003e is connected to other devices through the Serial Peripheral Interface (SPI). It uses a 1x7 connector CN1 for connection with the additional board. Next to the CN1 connector, the board denotes the function of pins provided on the additional board.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768341815485,"sku":"MIKROE-480","price":7.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-serialflash-proto-board-29669691130045.jpg?v=1685126281"},{"product_id":"mikroe-483-usb-uart-board-uk","title":"USB UART Board","description":"\u003ch2\u003eIC\/Module: FT232R Serial UART to USB Interface\u003c\/h2\u003e\n\n\u003cp\u003eThe FT232R is a fully integrated serial UART to USB interface that reduces the external component count by including external EEPROM, clock circuit and USB resistors onto the device. This way, it also ensures further simplification of USB to serial designs. FT232R also features synchronous and asynchronous bit bang interface options with RD# and WR# strobes.\u003c\/p\u003e\n\n\u003ch2\u003eConnectors and Jumpers\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eUSB UART Board \u003c\/strong\u003eutilizes the USB MINIB connector CN1 for connecting to USB devices. The 1x6 connector CN2 and 1x9 connector CN3 are used to establish connection with the microcontroller. On the other hand, the board features an on-board jumper J6 that allows selection of a logic level (3.3V or 5V), which is sent to the VCCIO pin on 1x6 connector CN2.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768341848253,"sku":"MIKROE-483","price":16.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-usb-uart-board-36288219218143.jpg?v=1684970387"},{"product_id":"usb-uart-2-board-mikroe-549-uk","title":"USB UART 2 Board","description":"\u003cp\u003e\u003cstrong\u003eIC\/Module: MCP2200 USB-to-UART Serial Converter\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eMCP2200 is a USB-to-UART serial converter that allows USB connectivity for prototype devices with UART interface. Designed for low-power consumption, MCP2200 has 256 bytes of integrated user EEPROM and eight GPIO pins.It also has a USB protocol controller, which is full-speed USB 2.0 compliant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEEPROM Module\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe on-board EEPROM module is a 256-byte array of non-volatile memory. The memory cells for data EEPROM are capable of enduring thousands of erase\/write cycles, up to 100K for EEPROM. It allows for data retention without refresh for more than 40 years. The memory locations are retrieved for read\/write operations through USB host commands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUART Interface\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eUSB UART 2 Board uses the UART (Universal Asynchronous Receiver\/Transmitter) interface and supports baud rates of 300-1000k. It has hardware flow control and UART signal polarity option. It has eight general purpose I\/O pins.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768341881021,"sku":"MIKROE-549","price":10.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-usb-uart-2-board-23151746842813.jpg?v=1685149313"},{"product_id":"ethernet-connector-board-mikroe-224-uk","title":"Ethernet Connector Board","description":"\u003ch2\u003eRJ45 Ethernet Connector\u003c\/h2\u003e\n\n\u003cp\u003eThis high-quality Ethernet connector is a standardized physical network interface commonly used for Ethernet networking. Slightly wider than a telephone jack, Ethernet cables come with an RJ45 (Registered Jack) connector on each end. The 8-position, 8-contact (8P8C) is the most commonly used twisted-pair RJ45 connector.\u003c\/p\u003e\n\n\u003ch2\u003eLED Indicators\u003c\/h2\u003e\n\n\u003cp\u003eEthernet Connector Board features two (Rx and Tx) LED indicators that denotes receive and transmit operations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eEthernet Connector Board,\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768342208701,"sku":"MIKROE-224","price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-ethernet-connector-board-30254463713469.jpg?v=1685003336"},{"product_id":"mikroe-602-max3232-board-uk","title":"MAX3232 Board","description":"\u003ch2\u003eUART Interface\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eMAX3232 Board\u003c\/strong\u003e\u003c\/em\u003e sends\/receives data to\/from the host microcontroller using serial UART communication. The data is first converted as per the RS232 standard, and then sent to the RS232 device.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Connectors\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMAX3232 Board\u003c\/strong\u003e features two connectors: 1x6 connector CN1 and CN2. The CN1 is used to easily connect the additional board to a microcontroller. The CN2 connector enables user to establish connection with an RS232 device.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768342241469,"sku":"MIKROE-602","price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-max3232-board-29669837209789.jpg?v=1685150205"},{"product_id":"usb-charger-board-mikroe-710-uk","title":"USB Charger Board","description":"\u003ch2\u003eIC\/Module: MCP73832 Single-Cell Charge Management Controller\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eUSB Charger Board\u003c\/strong\u003e\u003c\/em\u003e is based on the Microchip MCP73832 is a miniature, single-cell, fully-integrated Li-Ion\/Li-Polymer charge management controller. This linear charge management controller employs a constant-current\/constant-voltage charge algorithm with selectable preconditioning and charge termination. It offers thermal regulation that optimizes the charge cycle time and maintains the device reliability.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768342274237,"sku":"MIKROE-710","price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-usb-charger-board-29669777146045.jpg?v=1685051396"},{"product_id":"glcd-240x64-adapter-board-mikroe-162-uk","title":"GLCD 240x64 Adapter Board","description":"\u003cp\u003eThe \u003cstrong\u003eGLCD 240x64 Adapter Board\u003c\/strong\u003e is used to connect a 240x64 GLCD with T6963C Toshiba driver to your development board or prototype device. Board features a potentiometer used for GLCD contrast adjustment. It is equipped with two long flat cables, each with IDC10 female header connector, which is compatible with all mikroElektronika development boards.\u003c\/p\u003e\n\n\u003ch2\u003eIC\/Module: T6963C Toshiba Driver\u003c\/h2\u003e\n\n\u003cp\u003ePopularly used in small graphic modules, the T6963C LCD controller from Toshiba is capable of controlling displays with a resolution up to 240x128 or 320x64 pixels. It has an 8-bit parallel data bus and control lines that allow for easy interfacing with a number of MPUs. Its compact size and low-power consumption make it an ideal choice for PDAs, MP3 players, mobile measurement equipment, etc. It also contains a 128-character Character-Generator ROM (CG-ROM) and has the capability to control up to 64K bytes of external display RAM (VRAM).\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768342438077,"sku":"MIKROE-162","price":50.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-glcd-240x64-adapter-board-28878733082813.jpg?v=1685167309"},{"product_id":"glcd-128x64-adapter-board-mikroe-130-uk","title":"GLCD 128x64 Adapter Board","description":"\u003cp\u003eThe \u003cstrong\u003eGLCD 128x64 Adapter Board\u003c\/strong\u003e provides the necessary interface for connecting 128x64 Graphical LCD Display with the target development board. Board supports 8-bit parallel data and control interface and is equipped with GLCD contrast potentiometer. Data and control lines are grouped separately and connected via long flat cables to female IDC10 header connectors.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768342470845,"sku":"MIKROE-130","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-glcd-128x64-adapter-board-28878714536125.jpg?v=1685007649"},{"product_id":"mikroe-153-glcd-240x128-adapter-board-uk","title":"GLCD 240x128 Adapter Board","description":"\u003cp\u003eThe \u003cstrong\u003eGLCD 240x128 Adapter Board\u003c\/strong\u003e is used to connect a 240x128 GLCD with \u003ca href=\"http:\/\/www.toshiba.com\/taec\/components\/Datasheet\/T6963CDS.pdf\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eT6963C\u003c\/a\u003e Toshiba driver to your development board or prototype device. Board features a potentiometer used for GLCD contrast adjustment. It is equipped with two long flat cables, each with IDC10 female header connector, which is compatible with all mikroElektronika development boards.\u003c\/p\u003e\n\n\u003ch2\u003eIC\/Module: Toshiba T6963C CMOS Digital IC\u003c\/h2\u003e\n\n\u003cp\u003eT6963C is an LCD controller designed for use with LCD control driver LSIs and data display memories. It features a 128-word character generator ROM that can provide control over an external display RAM of up to 64 Kbytes. With an 8-bit parallel data and control lines, this driver supports reading or writing through an MPU interface.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768342503613,"sku":"MIKROE-153","price":30.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-glcd-240x128-adapter-board-28878727905469.jpg?v=1685103410"},{"product_id":"smartadapt-mini-board-mikroe-206-uk","title":"SmartADAPT MINI Board","description":"\u003ch2\u003eBoard Connections\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eSmartADAPT2 MINI Board\u003c\/strong\u003e\u003c\/em\u003e is connected to the development system using 2x5 connectors CN1, which is connected to the development systems port via a flat cable with IDC10 connectors. For connection with another accessory board or device, use a 2x5 connector CN2. The add-on board can be provided with the power supply voltage from the development system it is connected to.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768342536381,"sku":"MIKROE-206","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-smartadapt-mini-board-29669449957565.jpg?v=1685068670"},{"product_id":"smartadapt-board-mikroe-204-uk","title":"SmartADAPT Board","description":"\u003ch2\u003eBoard Connections\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eSmartADAPT\u003c\/strong\u003e\u003c\/em\u003e board features 20x8 header matrix with 8 jumpers which are used to manually route desired input lines to appropriate output headers in order to form a new pinout arrangement. Board is equipped with screw terminals if you want to provide external power supply, instead of using one from input headers. Both input and output headers are compatible with mikroElektronika development and accessory boards.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768342995133,"sku":"MIKROE-204","price":66.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-smartadapt-29669463818429.jpg?v=1685117812"},{"product_id":"mikroe-333-microphone-amp-board-uk","title":"Microphone AMP Board","description":"\u003cp\u003eThe \u003cstrong\u003eMicrophone AMP Board\u003c\/strong\u003e features a microphone connected to a power amplifier \u003ca href=\"http:\/\/www.ti.com\/product\/lm4864\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eLM4864\u003c\/a\u003e designed for use in low-voltage consumer applications. The gain is internally set to 20 in order to keep external part count low, but the addition of a potentiometer and capacitor between pins 1 and 8 will increase the gain up to 200.\u003c\/p\u003e\n\n\u003ch2\u003eIC\/Module: LM4864 Audio Power Amplifier with Shutdown Mode\u003c\/h2\u003e\n\n\u003cp\u003eLM4864 is a 725mW audio power amplifier for a 5V power supply. Designed specifically to work on a low supply voltage with high quality output power, LM4864 requires a minimal amount of external components. This module does not require output coupling capacitors, bootstrap capacitors, or snubber circuits, making it fit for use in low-power portable applications.\u003c\/p\u003e\n\n\u003ch2\u003eBridge Amplifier Design\u003c\/h2\u003e\n\n\u003cp\u003eThe bridge amplifier design features some benefits over the single-ended configuration. It provides differential drive to the load, and thus doubles output swing for a specified supply voltage. It can provide four times the output power as compared to a single-ended amplifier. Another advantage is that it eliminates the need for an output coupling capacitor required in a single supply, single-ended amplifier configuration.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768343257277,"sku":"MIKROE-333","price":14.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-microphone-amp-board-29669550096573.jpg?v=1685139947"},{"product_id":"mikroe-1198-volt-usb-battery-charger-board-uk","title":"VOLT - Smart USB Li-Po Battery Charger Board","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eVOLT\u003c\/strong\u003e\u003c\/em\u003e is a smart USB Li-Polymer battery charger. It features power management circuitry with an MCP73832, which can charge the battery over USB connector. Using provided screw terminals (VSYS and GND) VOLT can also be used to power your target device from battery (Vbat) or USB (5V). When USB is connected battery is charging and VSYS outputs 5V. Power LED is active when either USB or battery is connected, while Charge LED lights up only when battery is charging. Additional screw terminals with STAT and SENSE lines enable battery charge monitoring.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768344338621,"sku":"MIKROE-1198","price":16.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-battery-volt-smart-usb-li-po-battery-charger-28827881799869.jpg?v=1685148229"},{"product_id":"mikroe-151-serial-lcd-adapter-board-uk","title":"Serial LCD Adapter Board","description":"\u003ch2\u003eIC\/Module: MCP23S17 High-Speed 16-bit I\/O Expander\u003c\/h2\u003e\n\n\u003cp\u003eMCP23S17 features a remote bidirectional 16-bit I\/O port that allows SPI clock speeds up to 10 MHz. It consists of several 8-bit configuration registers for input, output and polarity selection. The system master can qualify the I\/Os as either inputs or outputs by writing the I\/O configuration bits (IODIRA\/B). The data for each input or output is kept in the corresponding input or output register. The 16-bit I\/O port functionality consists of two 8-bit ports: PORTA and PORTB. It has two interrupt pins (INTA and INTB) that can be connected with their individual ports, or can be logically ORed together in order to activate the pins in case either port triggers an interrupt.\u003c\/p\u003e\n\n\u003ch2\u003eBoard Connections\u003c\/h2\u003e\n\n\u003cp\u003eThe Serial LCD Adapter Board makes use of an IDC10 connector (on the additional board) for connection to a development system as well as one of the 2x5 connectors on the development systems ports. The on-board 1x6 connector CN2 allows the user to establish a connection with the LCD display.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768344371389,"sku":"MIKROE-151","price":5.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-serial-lcd-adapter-board-29669678022845.jpg?v=1685041843"},{"product_id":"mikroe-154-serial-lcd-glcd-adapter-board-uk","title":"Serial LCD\/GLCD Adapter Board","description":"\u003cp\u003eThe \u003cstrong\u003eSerial LCD\/GLCD Adapter Board\u003c\/strong\u003e enables you to easily connect your GLCD 128x64px and LCD 2x16, 4x20 character displays to your board and save MCU pins. A 16-bit I\/O expander \u003ca href=\"http:\/\/www.microchip.com\/wwwproducts\/Devices.aspx?dDocName=en023500\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eMCP23S17\u003c\/a\u003e is provided on the board thus decreasing the number of MCU pins needed for running this display. Expander features SPI(tm) clock speeds up to 10 MHz for higher throughput applications. Board is equipped with a long flat cable with IDC10 female header connector, which is compatible with all mikroElektronika development boards.\u003c\/p\u003e\n\n\u003ch2\u003eIC\/Module: MCP23S17 16-bit Bidirectional I\/O Port\u003c\/h2\u003e\n\n\u003cp\u003eMCP23S17 is a 16-bit remote bidirectional I\/O port featuring SPI clock speeds up to 10 MHz for higher-throughput applications. It comprises of multiple 8-bit configuration registers for input, output and polarity selection. The 16-bit I\/O port functionality consists of two 8-bit ports: PORTA and PORTB. It has two interrupt pins (INTA and INTB) that can be connected with their individual ports, or can be logically ORed together in order to activate the pins in case either port triggers an interrupt.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768344404157,"sku":"MIKROE-154","price":16.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-serial-lcd-glcd-adapter-board-23151686156477.jpg?v=1685125009"},{"product_id":"serial-glcd-240x64-adapter-board-mikroe-150-uk","title":"Serial GLCD 240x64 Adapter Board","description":"\u003cp\u003eSerial GLCD 240x64 Adapter Board.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768344436925,"sku":"MIKROE-150","price":11.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-serial-glcd-240x64-adapter-board-23151686090941.jpg?v=1685041677"},{"product_id":"mikroe-155-serial-glcd-240x128-adapter-board-uk","title":"Serial GLCD 240x128 Adapter Board","description":"\u003cp\u003eThe \u003cstrong\u003eSerial GLCD 240x128 Adapter Board\u003c\/strong\u003e enables you to easily connect your GLCD T6963C (Toshiba) and save MCU pins. A 16-bit I\/O expander MCP23S17 is provided on the board thus decreasing the number of MCU pins needed for running this display. Expander features SPI(tm) clock speeds up to 10 MHz for higher throughput applications. Board is equipped with a long flat cable with IDC10 female header connector, which is compatible with all mikroElektronika development boards.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768344469693,"sku":"MIKROE-155","price":8.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-serial-glcd-240x128-adapter-board-23151686189245.jpg?v=1685082706"},{"product_id":"mikroe-234-audioamp-board-uk","title":"AudioAMP Board","description":"\u003ch2\u003eIC\/Module: LM386 Audio Amplifier\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eAudioAMP Board\u003c\/strong\u003e\u003c\/em\u003e is based on the LM386 power amplifier intended for low-voltage consumer applications. In order to keep external part count low, the gain is initially set to 20. However, with the addition of an external resistor and capacitor between pins 1 and 8, the gain can be increased from 20 to 200. The inputs are ground referenced while the output automatically gives a bias to one-half the supply voltage.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768344502461,"sku":"MIKROE-234","price":14.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-audioamp-board-28853594259645.jpg?v=1684983535"},{"product_id":"touchpanel-controller-proto-mikroe-317-uk","title":"TouchPanel Controller PROTO Board","description":"\u003ch2\u003eResistive Touch-Screen Concept\u003c\/h2\u003e\n\n\u003cp\u003eA resistive touch screen is fabricated with two transparent, flexible sheets coated with a conductive material stacked on top of each other, separated by an air gap. When pressure is applied by a finger or a stylus on the screen, the top layer makes contact with the lower layer. When a voltage is applied across one of the layers, a voltage divider is created. The coordinates of a touch can be found by applying a voltage across one layer in the Y-direction and reading the voltage created by the voltage divider to find the Y-coordinate, and then applying a voltage across the other layer in the X-direction and reading the voltage generated by the voltage divider to find the X-coordinate.\u003c\/p\u003e\n\n\u003ch2\u003eBoard Connections\u003c\/h2\u003e\n\n\u003cp\u003eUsing a 1x6 connector CN1, the TouchPanel Controller PROTO can be connected to a port of the development system. On the other hand, the connection between a touch panel and the TouchPanel Controller PROTO is established using the connector CN2.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768344535229,"sku":"MIKROE-317","price":16.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-touchpanel-controller-proto-23151735505085.jpg?v=1685043644"},{"product_id":"smartadapt2-with-glcd-connector-mikroe-207-uk","title":"SmartADAPT2 with GLCD Connector Board","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eSmartADAPT2 with GLCD\/LCD Connector Board\u003c\/strong\u003e\u003c\/em\u003e is used to rearrange 16 I\/O pins just by moving on-board jumpers in order to meet your specified needs. It features a jumper for selecting input voltage and configurable GLCD\/LCD connector.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eSmartADAPT2 with GLCD\/LCD Connector Board\u003c\/strong\u003e\u003c\/em\u003e features 32x16 header matrix with 16 jumpers which are used to manually route desired input lines to appropriate output headers in order to form a new pinout arrangement. It also features GLCD\/LCD connector, as well as contrast potentiometer. Board is equipped with screw terminals if you want to provide external power supply, instead of using one from input headers. Both input and output headers are compatible with mikroElektronika development and accessory boards.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768344797373,"sku":"MIKROE-207","price":33.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-smartadapt2-with-glcd-connector-29669477122237.jpg?v=1685135101"},{"product_id":"mikroe-316-potentiometer-board-uk","title":"Potentiometer Board","description":"\u003cp\u003eAdd potentiometer functionality to the design using the \u003cstrong\u003ePotentiometer Board\u003c\/strong\u003e. Designed for testing analog inputs of a microcontroller on a development system, the Potentiometer Board is equipped with eight 10K potentiometers with related jumpers that allows user to enable\/disable each one individually. It works as an effective and low-cost solution for testing analog inputs on the prototype board. The on-board potentiometers allow for adjusting voltage levels on the host microcontroller.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768345682109,"sku":"MIKROE-316","price":19.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-potentiometer-board-29777635803325.jpg?v=1685130238"},{"product_id":"mikroe-429-microsd-card-proto-board-uk","title":"MicroSD Card Proto Board","description":"\u003cp\u003eThe \u003cstrong\u003emicroSD Card PROTO Board\u003c\/strong\u003e is equipped with a card slot for microSD memory cards that allow for simple and fast data acquisition or storage of audio, video, images and other multimedia data. Generally, microcontrollers serve as a removable storage option, but have limited built-in storage. The \u003cstrong\u003emicroSD Card PROTO Board\u003c\/strong\u003e is a simple and safe solution to your data storage needs. With this, the user can store large amount of data into a small space. The board is connected to a development system through a 2x5 connector and is designed to connect with a wide range of development systems.\u003c\/p\u003e\n\n\u003ch2\u003eBoard Connections\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003emicroSD Card PROTO Board\u003c\/strong\u003e uses a 1x7 connector CN1 to connect to a microcontroller. The connector CN2 is used for inserting a microSD memory card. A power supply voltage of 3.3V is provided for its operation.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768345714877,"sku":"MIKROE-429","price":25.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-microsd-card-proto-board-29669699944637.jpg?v=1685139046"},{"product_id":"mikroe-201-serial-7-seg-display-board-uk","title":"Serial 7-seg Display Board","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eSerial 7-seg Display Board\u003c\/strong\u003e\u003c\/em\u003e features a compact, serial input\/output common-cathode display driver MAX7219 used to interface MCUs to 7-segment numeric LED displays via SPI interface. The chip includes a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers and 8x8 static RAM for storing digits. Display drivers are connected to 4 common-cathode LED displays.\u003cbr\u003e\n\u003cbr\u003e\nThe board is equipped with a flat cable ending with IDC10 female header connector, which is compatible with all mikroElektronika development boards. It features four 7-segment digits arranged in a single row.\u003c\/p\u003e\n\n\u003ch3\u003eHow to Connect the Serial 7-seg Display Board?\u003c\/h3\u003e\n\n\u003cp\u003eThe additional board is connected to a development system via an IDC10 connector on the board and a 2x5 connector on one of the development system's ports. It is necessary to define in the program, to be loaded into the microcontroller, which port will be used for SPI communication.\u003c\/p\u003e\n\n\u003cp\u003eThe position of SMD jumpers depends on the development system in use. These jumpers are placed in the position marked PIC by default. It means that the board is ready to be used with PIC development systems. If you want to use it with AVR\/8051 development systems, it is necessary to unsolder jumpers from the PIC position and resolder them in the AVR\/8051 position.\u003c\/p\u003e\n\n\u003cp\u003eThe Serial 7-Seg Display additional board is powered with the 5V power supply from the development system it is connected to.\u003c\/p\u003e\n\n\u003ch3\u003eDisplaying Digits\u003c\/h3\u003e\n\n\u003cp\u003eDisplaying digits is enabled by the time-division multiplexing. All the operations related to multiplexing and displaying digits are performed by using the MAX7219 circuit provided on the additional board.\u003cbr\u003e\n\u003cbr\u003e\nThe time-division multiplexing of a 7-segment display is based on fast turning the display segments on\/off in such a manner that one gets an impression that all eight digits are active at the same time. The MAX7219 circuit feeds digit segments with a signal via pins marked SEGxx, whereas pins marked DIGx are used to select one of four displays to show the appropriate number.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768346042557,"sku":"MIKROE-201","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-display-serial-7-seg-display-board-29669660229821.jpg?v=1685082712"},{"product_id":"mikroe-67-can-1-board-uk","title":"CAN-1 Board","description":"\u003cp\u003e\u003cstrong\u003eIC\/Module: MCP2551 CAN Transceiver\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe MCP2551 is a high-speed CAN transceiver that serves as an interface between a CAN protocol controller and the physical bus. This fault-tolerant device provides differential transmit and receive capability for the CAN protocol controller. Fully compatible with the ISO-11898 standard, it allows a maximum of 112 nodes to be connected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCAN Protocol\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe physical layer uses differential transmission on a twisted pair wire while a non-destructive bit-wise arbitration is used to control access to the bus. The protocol is also implemented in silicon, which allows the error handling and fault confinement facilities of CAN to be combined with a high transmission speed.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768346239165,"sku":"MIKROE-67","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-can-1-board-28861741269181.jpg?v=1684991462"},{"product_id":"mikroe-66-rs-485-interface-board-uk","title":"RS485 Board","description":"\u003ch2\u003eIC\/Module: ADM485 Low-Power Differential Line Transceiver\u003c\/h2\u003e\n\n\u003cp\u003eThe ADM485 is a differential line transceiver that provides high performance and low-power consumption. Suitable for high speed bidirectional data communication on multipoint bus transmission lines, it assures of balanced data transmission. Both the driver and receiver, included in the module, can be enabled independently.\u003c\/p\u003e\n\n\u003ch2\u003eBiCMOS Technology\u003c\/h2\u003e\n\n\u003cp\u003eIntegrating two separate semiconductor technologies, BiCMOS combines bipolar and CMOS technology. It enables the user to combine low-power CMOS circuits with high-speed circuits by means of bipolar transistors. While all inputs and outputs are protected against electrostatic discharge, the drivers are made to have high current carrying capacity.\u003c\/p\u003e\n\n\u003ch2\u003eSMD Jumpers\u003c\/h2\u003e\n\n\u003cp\u003eRS485 Board features a set of jumpers that allows user to determine which node in RS485 network will be assigned to RS485 accessory board. Place jumpers J1, J2, J3 to set the accessory board to first node in RS485 network. Remove all jumpers, if it is required to keep the accessory board somewhere in between first and last node. Place jumper J1 to keep set the board to last node.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768346271933,"sku":"MIKROE-66","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-rs485-board-29669823938749.jpg?v=1685116381"},{"product_id":"mikroe-233-mikrodrive-board-uk","title":"mikroDrive Board","description":"\u003ch2\u003eIC\/Module: ULN2803A Darlington Transistor Array\u003c\/h2\u003e\n\n\u003cp\u003eThe ULN2803A is a high-current 8x Darlington transistor array that is capable of powering loads up to 260W in total. The open-collector output transistors have integral clamp diodes that protect them against high voltage of self-induction.With a collector-current rating of 500 mA, each Darlington pair may be connected in parallel for higher current capability. It features a 2.7-kΩ series base resistor for each Darlington pair for operation directly with TTL or 5-V CMOS devices.\u003c\/p\u003e\n\n\u003ch2\u003eJumper Settings\u003c\/h2\u003e\n\n\u003cp\u003eThe mikroDrive Board features a Jumper J1 that allows the user to select the power supply source for the ULN2803As output drivers. When J1 is set in Vcc position, the power comes through the IDC10 connector from the 5V microcontroller host system. When the jumper is set to the Vcc-Ext position, the outputs are powered from an external source up to 50V via screw terminals.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eThe mikroDrive Board serves as an ideal choice for designs where power source conversion between low-level logic circuitry and multiple peripheral power loads. Typical power loads include relay drivers, hammer drivers, lamp drivers, display drivers (LED and gas discharge), line drivers, and logic buffers.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eMiscellaneous\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eCompact and inexpensive, this board is perfect for use when the power source conversion is needed for your embedded project\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003eDarlington arrays ULN2803AN, Screw terminals\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eOutput voltage selection jumper on board\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eGPIO\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003eIDC10\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e9-32V DC or 7-23 AC (via external source)\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768346337469,"sku":"MIKROE-233","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-mikrodrive-board-29669753553085.jpg?v=1685085420"},{"product_id":"mikroe-473-accel-spi-board-uk","title":"Accel SPI Board","description":"\u003ch2\u003eIC\/Module: ADXL345 Three-Axis Accelerometer\u003c\/h2\u003e\n\n\u003cp\u003eADXL345 is an ultra-small, low-power, 3-axis accelerometer tool that measures static and dynamic acceleration in 13-bit resolution ranging +\/- 16g. The digital output data is formatted as 16-bit twos complement and is accessible through either a SPI or I2C digital interface. It is an ideal choice for integrating into mobile devices thanks to its low-power consumption.\u003c\/p\u003e\n\n\u003ch2\u003eExtraordinary Sensing Functions\u003c\/h2\u003e\n\n\u003cp\u003eThe ADXL345 based \u003cstrong\u003eAccel SPI Board\u003c\/strong\u003e features several special sensing functions. It provides activity and inactivity sensing that detect the presence or lack of motion. The tap sensing identifies taps and double taps while the free-fall sensing detects whether the tool is falling. These sensing functions can be mapped to one or two interrupt output pins.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768346894525,"sku":"MIKROE-473","price":117.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-interface-board-accel-spi-board-28847472935101.jpg?v=1685109001"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/collections\/lg-can-spi-33v-click.jpg?v=1724338105","url":"https:\/\/thedebugstore.com\/en-gr\/collections\/interface-boards-catalogue.oembed?page=12","provider":"Debug Store","version":"1.0","type":"link"}