{"title":"Bus \u0026 Protocol Tools","description":null,"products":[{"product_id":"total-phase-tp240141-aardvark-i2c-spi-interface","title":"Total Phase Aardvark I2C\/SPI Host Adapter","description":"\u003csection\u003e\n\u003cp\u003eThe Total Phase Aardvark I2C\/SPI Host Adapter (TP240141) connects a Windows, Linux or macOS PC to the I2C and SPI buses on your board over USB. It works as a master or a slave on either bus, so you can drive a sensor or memory from a script, or stand in for a peripheral while you test a host driver. It is Total Phase's most popular product and is used for I2C and SPI bring-up, EEPROM and Flash programming, and scripted production test.\u003c\/p\u003e\n\n\u003ch2\u003eAardvark I2C\/SPI Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI2C\u003c\/th\u003e\n\u003ctd\u003eMaster 1 kHz to 800 kHz; slave mode; multi-master, clock stretching, repeated start and 10-bit addressing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSPI\u003c\/th\u003e\n\u003ctd\u003eMaster 125 kHz to 8 MHz; slave 0.1 MHz to 4 MHz; full duplex; SS polarity set in software (master)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGPIO\u003c\/th\u003e\n\u003ctd\u003eUp to 6, shared with the I2C and SPI pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible buses\u003c\/th\u003e\n\u003ctd\u003eSMBus, PMBus, DDC, SBBus, IPMI, TWI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal levels\u003c\/th\u003e\n\u003ctd\u003e3.3 V, 10 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTarget power\u003c\/th\u003e\n\u003ctd\u003e+5 V, 25 mA max on pins 4 and 6, switched in software\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTarget connector\u003c\/th\u003e\n\u003ctd\u003e2×5 IDC female, 2.54 mm pitch, on a 10-way ribbon cable (1.27 mm pitch, 130 mm long)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 1.1 full speed, USB-B receptacle, bus-powered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eControl Center Serial, Flash Center, Aardvark API (C, C++, C#, Python, .NET, VB.NET, VB6), LabVIEW driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating systems\u003c\/th\u003e\n\u003ctd\u003eWindows 7, 10 and 11; Linux (Red Hat, SuSE, Ubuntu, Fedora); macOS 13 and later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize and weight\u003c\/th\u003e\n\u003ctd\u003e55.6 × 22.2 × 89 mm, 64 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e10 to 35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eActual I2C bus speed varies with bus capacitance.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAardvark I2C\/SPI Host Adapter with 10-way target ribbon cable\u003c\/li\u003e\n\u003cli\u003eUSB A to B cable, 1.8 m (6 ft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eControl Center Serial, Flash Center, the Aardvark API and the LabVIEW driver are free downloads from Total Phase.\u003c\/p\u003e\n\n\u003ch2\u003eWhere Engineers Use the Aardvark\u003c\/h2\u003e\n\u003ch3\u003eBoard Bring-Up Before Firmware Exists\u003c\/h3\u003e\n\u003cp\u003eAs an I2C or SPI master, the Aardvark takes the place of the microcontroller. Read a sensor's ID register, write a PMIC's configuration or poll an ADC from Control Center Serial without writing code. Once a sequence works, save it as an XML batch script and run it again on every board spin.\u003c\/p\u003e\n\u003ch3\u003eEEPROM and Flash Programming\u003c\/h3\u003e\n\u003cp\u003eFlash Center programs and reads I2C and SPI EEPROMs and Flash memory from an XML parts library that you can extend. The Aardvark programs parts in-system on the target board or stand-alone.\u003c\/p\u003e\n\u003ch3\u003ePeripheral Emulation for Host Driver Testing\u003c\/h3\u003e\n\u003cp\u003eIn slave mode the Aardvark answers as an I2C or SPI peripheral, so you can test a host driver before the real part arrives, with responses you control. Pins not used by the active bus can be switched to GPIO to drive resets and enables or watch status lines alongside the bus traffic.\u003c\/p\u003e\n\u003ch3\u003eAutomated and Production Test\u003c\/h3\u003e\n\u003cp\u003eThe Aardvark API gives C, C++, C#, Python, .NET, VB.NET and VB6 access on Windows, Linux and macOS, and the LabVIEW driver suits NI-based test rigs. Several Aardvarks can run from one PC, each opened by its own port number.\u003c\/p\u003e\n\n\u003ch2\u003eAardvark, Beagle, Cheetah or Promira\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTool\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRole\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eI2C\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSPI\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eChoose It When\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAardvark I2C\/SPI (TP240141)\u003c\/td\u003e\n\u003ctd\u003eHost adapter, master or slave\u003c\/td\u003e\n\u003ctd\u003eMaster to 800 kHz\u003c\/td\u003e\n\u003ctd\u003eMaster to 8 MHz, slave to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eEveryday 3.3 V bring-up, programming and test\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-de\/products\/total-phase-tp320121-beagle-i2c-spi-analyser-uk\"\u003eBeagle I2C\/SPI (TP320121)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003ePassive protocol analyser\u003c\/td\u003e\n\u003ctd\u003eMonitors to 4 MHz\u003c\/td\u003e\n\u003ctd\u003eMonitors to 24 MHz\u003c\/td\u003e\n\u003ctd\u003eYou need to record bus traffic without driving it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-de\/products\/total-phase-tp280121-cheetah-spi-adapter-uk\"\u003eCheetah SPI (TP280121)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-speed SPI host adapter\u003c\/td\u003e\n\u003ctd\u003eNot supported\u003c\/td\u003e\n\u003ctd\u003eMaster to 40+ MHz\u003c\/td\u003e\n\u003ctd\u003eFast SPI Flash programming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-de\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform (TP500110)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHost adapter and analyser\u003c\/td\u003e\n\u003ctd\u003eMaster and slave to 3.4 MHz\u003c\/td\u003e\n\u003ctd\u003eMaster to 80 MHz, slave to 20 MHz\u003c\/td\u003e\n\u003ctd\u003eHigher speeds, or 0.9 V to 3.3 V signalling without a level shifter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePromira speeds depend on the application level licensed. Many engineers pair the Aardvark with a Beagle: one generates traffic, the other records it. For targets below 3.3 V, add the \u003ca href=\"\/en-de\/products\/total-phase-tp240610-level-shifter-board-uk\"\u003eTotal Phase Level Shifter Board (TP240610)\u003c\/a\u003e, which shifts to standard logic levels from 1.2 V to 3.3 V.\u003c\/p\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cp\u003e3.3 V signalling only (use the Level Shifter Board below 3.3 V); SPI slave mode tops out at 4 MHz; USB 1.1 full speed; no eSPI (see Promira).\u003c\/p\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-de\/products\/total-phase-tp-240212-10-pin-split-cable-uk\"\u003e10-Pin Split Cable (TP240212)\u003c\/a\u003e for connecting to individual header pins on the target\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-de\/products\/total-phase-i2c-spi-activity-board-tp240310\"\u003eI2C\/SPI Activity Board (TP240310)\u003c\/a\u003e, a ready-made I2C and SPI target for learning and testing scripts\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-de\/collections\/saleae-catalogue-uk\"\u003eSaleae logic analysers\u003c\/a\u003e for waveform-level timing alongside protocol decode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLast reviewed 24 October 2026.\u003c\/p\u003e\n\u003c\/section\u003e\n","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37754547896509,"sku":"TP240141","price":335.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp240141-total-phase-aardvark-i2c-spi-host-adapter-tp240141-debug-store-uk-42624390168799.png?v=1717340146"},{"product_id":"smart488-gpib-interface-alciom-uk","title":"Alciom Smart488 GPIB Interface","description":"\u003cp\u003eThe \u003cstrong\u003eAlciom smart488 \u003c\/strong\u003e\u003cstrong\u003eGPIB interface\u003c\/strong\u003e acts as a \u003cstrong\u003eGPIB controller\u003c\/strong\u003e with listener and talker functions and is seen as a virtual serial port from the host PC.\u003c\/p\u003e\n\n\u003cp\u003eThere is no need to scrap your existing test equipment with a GPIB \/ IEEE488 interface. You can now control these expensive items from your own desktop PC or Laptop by using the smart488 USB to GPIB converter.\u003c\/p\u003e\n\n\u003ch2\u003eSimple to Use\u003c\/h2\u003e\n\n\u003cp\u003eYou just need to ensure that you configure your existing GPIB software to treat the smart488 as a virtual COM port and set the GPIB address to 1. The smart488 is ideal for connecting to single instruments with a GPIB interface.\u003c\/p\u003e\n\n\u003ch2\u003eAdvanced Users\u003c\/h2\u003e\n\n\u003cp\u003eMany configuration parameters can be modified to tailor your connection is needed.\u003c\/p\u003e\n\n\u003ch2\u003eLabView Compatible\u003c\/h2\u003e\n\n\u003cp\u003eThe smart488 can be used with\u003cstrong\u003e LabView\u003c\/strong\u003e.  \u003cstrong\u003eLabView example\u003c\/strong\u003es can be downloaded to get you started.\u003c\/p\u003e","brand":"Alciom Sarl","offers":[{"title":"Default Title","offer_id":37768294662333,"sku":"Smart488","price":193.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/alciom-sarl-serial-adapter-smart488-gpib-interface-29817227772093.jpg?v=1685135626"},{"product_id":"le-200pr-data-logger-analyser-lineeye-uk","title":"Lineeye LE-200PF PC-connectable Multi Protocol Analyzer","description":"\u003cp\u003eIt is a high performance model, which covers all functions on LE-150P\/150PS and supports multiple protocols. PC Hosted ModeThe LE-200PR can be connected to a host PC which can be used to control the instrument and display captured data in a variety of different formats. Stand-alone ModeThe LE-200PS will operate by itself, from a local power supply, capturing data. This is useful when a PC cannot be used: in dirty or dusty environments or if data needs to be recorded for long periods of time, perhaps longer than one month.\u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768309440701,"sku":"LE-200PF","price":1020.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-analyser-lineeye-le-200pr-pc-connectable-multi-protocol-analyzer-23152043294909.jpg?v=1685036445"},{"product_id":"lineeye-le-25m34-v35-monitor-cable-uk","title":"Lineeye LE-25M34 V35 Monitor cable","description":"\u003cp\u003eLineeye LE-25M34 V35 Monitor Cable\u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768309571773,"sku":"LE-25M34","price":525.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-cable-monitor-cable-for-v-35-23152044048573.jpg?v=1685034119"},{"product_id":"lineeye-le-25tb-d-sub-25-pin-terminal-block-uk","title":"Lineeye LE-25TB2 Terminal block for DSUB 25pin","description":"\u003cp\u003eLE-25TB Terminal Block for DSUB 25-pin\u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768309670077,"sku":"LE-25TB2","price":135.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-protocol-analyser-accessory-le-25tb-terminal-block-for-dsub-25pin-38119200358623.jpg?v=1684964445"},{"product_id":"lineeye-le-25y15-x21-monitor-cable-uk","title":"Lineeye LE-25Y15 X20\/X21 Monitor cable","description":"\u003cp\u003eBranch cable for monitoring X20\/X21 interfaces fitted with DSUB 15-pin connectors.  Fitted with one male and one female DB15 connector to conveniently fit into a cable run.\u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768309735613,"sku":"LE-25Y15","price":280.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-cable-monitor-cable-for-x-21-23152044507325.jpg?v=1685084870"},{"product_id":"lineeye-le-25y37-rs-440-monitor-cable-uk","title":"Lineeye LE-25Y37 RS-449 Monitor cable","description":"\u003cp\u003eBranch cable for monitoring RS-449 fitted with DSUB 37-pin connectors.  Fitted with one male and one female DB37 connector to conveniently fit into a cable run.\u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768309768381,"sku":"LE-25Y37","price":295.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-cable-monitor-cable-for-rs-449-23152044540093.jpg?v=1685084867"},{"product_id":"lineeye-le-590tx-lan-packet-tester-debug-store-uk","title":"Lineeye LE-590TX Ethernet LAN Packet Tester","description":"\u003ch3\u003eCapture 10\/100Mbps LAN Packets Via USB\u003c\/h3\u003e\n\n\u003cp\u003eTAP mode captures 10\/100Mbps full-duplex data on PortA\/ PortB, and transmits to PC via USB2.0 port. Captured data can be displayed on PC.\u003c\/p\u003e\n\n\u003ch3\u003eFilter To Capture The Specific Packets\u003c\/h3\u003e\n\n\u003cp\u003eLE-590TX is not only able to capture all frames but also filter the specific packets. Filtering conditions can be set by MAC\/IP address, protocols (ARP\/IP\/ICMP\/IGMP\/TCP\/UDP\/use defined), and specifying IP address\/port\/packet size etc.\u003c\/p\u003e\n\n\u003ch3\u003eVisualize the amount of traffic\u003c\/h3\u003e\n\n\u003cp\u003eYou can evaluate the amount of traffic visually by a line, pie, an bar graph.\u003c\/p\u003e\n\n\u003ch3\u003eGenerate Packets Max. At 100Mbps Line Speed.\u003c\/h3\u003e\n\n\u003cp\u003ePG mode generates test packets at your specified transmitting speed. Tells you the processing ability of the network devices and how they work at the high traffic. Test packets are generated in the FPGA, so it will not be affected by the performance of PC.\u003c\/p\u003e\n\n\u003ch3\u003eUser Defined Test Packets\u003c\/h3\u003e\n\n\u003cp\u003eThe user can define 2-7 layer of data frames up to 64 for each of A and B port, and transmit them continuously or selected times. Add errors (CRC etc.) and VLAN tags. Captured packets can be used as transmitting packets.\u003c\/p\u003e\n\n\u003ch3\u003eRFC 2544 based Test Tool is attached\u003c\/h3\u003e\n\n\u003cp\u003eLINEEYE provide an Utility software \"LE590-2544; which is basing on RFC 2544 (an technical standard of network interconnection).\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003eThroughput\u003c\/li\u003e\n    \u003cli\u003eLatency\u003c\/li\u003e\n    \u003cli\u003ePacket Loss\u003c\/li\u003e\n    \u003cli\u003eBack to Back (Test of Buffer Capacity)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eYou can check those 4 tests by simple operation. The result can be output as a report.\u003c\/p\u003e\n\n\u003ch3\u003eCan be used as a NIC via USB\u003c\/h3\u003e\n\n\u003cp\u003eUsing a LE590-NIC, the packet tester acts as a network interface via USB. LE590-NIC can also be used for firmware update too.\u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768309866685,"sku":"LE-590TX","price":1125.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-protocol-analyser-le-590tx-ethernet-lan-packet-tester-38119224017119.jpg?v=1684964279"},{"product_id":"lineeye-le-650h2-usb-protocol-analyzer","title":"Lineeye LE-650H2 USB 2.0 Protocol Analyzer","description":"\u003cp\u003eWhile recording 480Mbps high-speed transfer data of USB 2.0 to the hard disk of the PC via a large capacity memory of LE-620HS, displays the contents of that data on the screen of the PC in detail at real time. It can identify PING and the split transaction at high speed.\u003c\/p\u003e\n\n\u003ch3\u003eEasy operation USB analyzer with auto tracking of the USB Speed\u003c\/h3\u003e\n\n\u003cp\u003eWithout affecting the communication carrying data between the analyzer and target device, the LE-650H2 series USB analyzer internally records large amounts of data and simultaneously transfer it to a connected PC via USB. The analyzer automatically detects the speed of the target devices (480\/12\/1.5 Mbps), so a speed setting is unnecessary. If the device is connected through a hub of differing speed, measurement can be started by simply pressing the space bar of the PC.\u003c\/p\u003e\n\n\u003ch3\u003eSmaller and Lighter\u003c\/h3\u003e\n\n\u003cp\u003eLE-650H2 has almost the same functions as the conventional model of the PC connectable USB analyzer LE-620HS has, but it is smaller and lighter by employing an aluminum case and 8-layer PCB.\u003c\/p\u003e\n\n\u003ch3\u003eContinuous Recording up to 10GB on HDD or SSD\u003c\/h3\u003e\n\n\u003cp\u003eThe data measured by the USB analyzer is continuously transferred to the PC and recorded as log files with a maximum of 2GB (Can be specify every 1MB) on the HDD or SSD of the PC. Furthermore, it is possible to form a ring buffer to record maximum of 5 log files continuously by using repetitive recording mode. The measurement log data can be displayed and scrolled during measurement, which is effective for an extended analysis of rare communications failures.\u003c\/p\u003e\n\n\u003ch3\u003eClearly Detailed Monitor Display\u003c\/h3\u003e\n\n\u003cp\u003eUSB packets are clearly displayed by transaction. The device can identify PING and the split transaction at high-speed. Standard descriptors\/device requests, descriptors of Communication\/Printer class, and peculiar device requests of HUB\/HID\/Audio\/Communication\/Mass storage class are translated and displayed in detail, therefore the difficult-to-understand USB protocols can be intuitively understood.\u003c\/p\u003e\n\n\u003ch3\u003ePowerful Sequential Trigger\u003c\/h3\u003e\n\n\u003cp\u003eTrigger condition by a certain transmission data or an external signal condition Up to 16 actions can be set which will be executed when the trigger condition is established.\u003cbr\u003e\nWith these triggers you can control logging by synchronizing with external signal or cooperate with another measurement equipment by switching the external trigger signal to ON when a specify data is detected. It will help your analysis.\u003c\/p\u003e\n\n\u003ch3\u003ePerfect Offline Analysis Features\u003c\/h3\u003e\n\n\u003cp\u003eData can be easily found among the huge volume of recorded data by using the filter function. It incorporates a advanced search function, such as searching for a standard request, class-divided request and class command.\u003c\/p\u003e\n\n\u003cp\u003eDevelopment efficiency is boosted to a higher level by using color-coded customization features for packet types and mark\/jump features.\u003c\/p\u003e\n\n\u003cp\u003eDetailed translation is possible by specifying the class for the data without emulation information.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768309899453,"sku":"LE-650H2","price":835.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-protocol-analyser-le-650h2-usb-2-0-protocol-analyzer-38119555006687.jpg?v=1684964273"},{"product_id":"lineeye-le-din13-din-rail-mount-uk","title":"Lineeye LE-DIN13 DIN rail mounting plate for LE-series","description":"","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768309964989,"sku":"LE-DIN13","price":65.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-protocol-analyser-accessory-le-din13-din-rail-mounting-plate-for-le-series-38119574765791.jpg?v=1684964267"},{"product_id":"le-pc300g-le-2500-e-3500-e-software-lineeye-uk","title":"PC Link software (for LE-3500XR(V2)\/2500XR(V2))","description":"","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768309997757,"sku":"LE-PC300R","price":275.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-analyser-accessory-pc-link-software-for-le-3500-x-r-2500-x-r-1500r-23152047489213.jpg?v=1685143195"},{"product_id":"op-sb7gx-can-bus-expansion-kit-lineeye-uk","title":"Lineeye OP-SB7GX Expansion kit for CAN \/ LIN","description":"\u003cp\u003eThe Lineeye OP-SB7GX expansion kit makes it possible to monitor, and simulate CAN and LIN communications. It enables monitoring of CAN and LIN data in any combination up to 2 channels at a time. Suitable for evaluation of mixed in-vehicle networks of CAN and LIN. It also supports the simultaneous recording of digital \/ analog signal input from four-channels of external signal.\u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768310128829,"sku":"OP-SB7GX","price":525.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-analyser-accessory-expansion-kit-for-can-lin-for-le-3500r-2500r-23152085762237.jpg?v=1685164250"},{"product_id":"lipowsky-elektronik-if-can-bc-reve01-uk","title":"Lipowsky IF-CAN-BC-REVE01 CAN Bus High-Low Converter","description":"\u003cp\u003eThe IF-CAN-BC-REVE01 is plugged into a CAN high speed interface and converts the signals of this interface for compatibility with fault tolerant low speed signal requirements. A DC Voltage from 8 to 36 volts can be connected to pin number 9 of either the low speed or the high speed connector. An internal voltage regulator and decoupling diodes supply the internal circuits with the proper voltage. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003enote:\u003c\/strong\u003e This unit is fitted with a line termination resistor on the high speed side.\u003c\/p\u003e","brand":"Lipowsky Industrie Elektronik GmbH","offers":[{"title":"Default Title","offer_id":37768310390973,"sku":"IF-CAN-BC-REVE01","price":115.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lipowsky-industrie-elektronik-gmbh-converter-lineeye-if-can-bc-reve01-can-bus-high-low-converter-29194678567101.jpg?v=1685037176"},{"product_id":"total-phase-tp320121-beagle-i2c-spi-analyser-uk","title":"Total Phase Beagle I2C\/SPI Analyser","description":"\u003ch3\u003eReal-Time Data Display\u003c\/h3\u003e\n\n\u003cp\u003eData captured by the \u003cstrong\u003eBeagle I2C\/SPI Analyser\u003c\/strong\u003e is displayed on screen as it arrives. This is especially useful when capturing slow data from HMI devices: the effect of a change can be seen straight away.\u003c\/p\u003e\n\n\u003cp\u003eMany analysers show a capture only after it stops; the Beagle with Data Center shows each transaction as it happens, so the impact of a change on the bus is understood quickly.\u003c\/p\u003e\n\n\u003ch3\u003eNon-Intrusive Capture of I2C, SPI and MDIO Data\u003c\/h3\u003e\n\n\u003cp\u003eRunning on Windows 7, 10 and 11, Linux (Red Hat, SuSE, Ubuntu, Fedora) and macOS 13 and later, the \u003cstrong\u003eTotal Phase Beagle I2C\/SPI Analyser\u003c\/strong\u003e is a low-cost way to monitor I2C, SPI or MDIO buses: \u003cstrong\u003eI2C to 4 MHz\u003c\/strong\u003e, \u003cstrong\u003eSPI to 24 MHz\u003c\/strong\u003e and \u003cstrong\u003eMDIO to 2.5 MHz\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe Beagle is a passive monitor: it adds only about 15 pF to each bus line and does not drive the bus. Attach it inline to capture the traffic to the target devices.\u003c\/p\u003e\n\n\u003ch3\u003eNearly Limitless Capture\u003c\/h3\u003e\n\n\u003cp\u003eCaptured data is streamed via High-Speed USB directly to your computer. The amount of data captured is limited only by the physical memory available on the machine.\u003c\/p\u003e\n\n\u003ch3\u003eBit-Level Timing\u003c\/h3\u003e\n\n\u003cp\u003eAs well as the timing of a whole packet, the Beagle gives the timing of each bit in a packet, with a resolution of \u003cstrong\u003e20 ns\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-Speed USB 2.0\u003c\/h3\u003e\n\n\u003cp\u003eThe Beagle has a \u003cstrong\u003eHigh-Speed USB 2.0 interface\u003c\/strong\u003e (480 Mbps) to the analysis PC. USB also powers the analyser, so no external supply is needed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Total Phase Beagle I2C\/SPI Analyser powered from the USB port, no external supply\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/usb-powered.png?v=1627552729\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSPI capture at 24 MHz is tested for typical bursts; sustained streaming at the top rate depends on the host PC.\u003c\/li\u003e\n\u003cli\u003eMDIO capture uses the Beagle API or Data Center v2.20, which Total Phase still provides.\u003c\/li\u003e\n\u003cli\u003eMonitors one SPI slave select line.\u003c\/li\u003e\n\u003cli\u003eTarget signals are 3.3 V logic; operating temperature 10 to 35 °C.\u003c\/li\u003e\n\u003cli\u003eThe 10-Pin Split Cable (TP240212) is not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eLast reviewed 24 October 2026.\u003c\/p\u003e\n","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317108413,"sku":"TP320121","price":400.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp320121-total-phase-beagle-i2c-spi-analyser-tp320121-debug-store-uk-42624418513119.png?v=1717340685"},{"product_id":"total-phase-tp320510-beagle-usb-480-analyser-uk","title":"Total Phase Beagle USB 480 Analyser","description":"\u003ch2\u003eBeagle USB 480 Real-time capture\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBeagle™USB 480 analyser \u003c\/strong\u003ehas two different capture modes, real-time capture and delayed download capture. Real-time mode allows you to see all the high-speed data transfer as it happens over a USB. The capture size in real-time mode is virtually infinite and is only limited by the RAM available on the computer used for analysis.The delayed-download mode is designed for cases when the\u003cstrong\u003e Beagle™ USB 480\u003c\/strong\u003e and the target device, both are connected on the same high-speed bus. The Beagle™ analyser consumes very less USB bandwidth in this case and thus does not hampers the operation of the target device.\u003c\/p\u003e\n\n\u003ch2\u003eUSB Class-Level Decoding\u003c\/h2\u003e\n\n\u003cp\u003eReal-time USB class-level decoding in the Data Center Software is available with the Beagle™ USB 480 Protocol Analyser.\u003c\/p\u003e\n\n\u003ch2\u003eHigh-Speed USB Chirp Detection\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBeagle™ USB 480 analyser\u003c\/strong\u003e features an integrated 64Mb buffer that stores all the information of the traffic. It has high transfer speeds of up to 480Mbps and also features \u003cstrong\u003ehigh-speed USB chirp detection\u003c\/strong\u003e that allows this analyser to capture and display the K and J chirp patterns used in high-speed speed negotiations.\u003c\/p\u003e\n\n\u003ch2\u003eAutomatic Speed Detection\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBeagle™ USB 480 Protocol Analyser\u003c\/strong\u003e is able to robustly and reliably detect the correct speed of the USB data it is monitoring.\u003c\/p\u003e\n\n\u003ch2\u003eDelayed Download Mode\u003c\/h2\u003e\n\n\u003cp\u003eThe delayed-download mode is designed for cases when the \u003cstrong\u003eBeagle™ USB 480\u003c\/strong\u003e and the target device are both connected on the same high-speed bus. The Beagle™ analyser consumes very less USB bandwidth in this case and thus does not hamper the operation of the target device.\u003c\/p\u003e\n\n\u003ch2\u003eHardware-based Packet Suppression\u003c\/h2\u003e\n\n\u003cp\u003eA hardware input filter is available to suppress packets in order to reduce the amount of data captured. The filter can remove empty packet pairs such as IN\/NAK and PING\/NAK pairs.\u003c\/p\u003e\n\n\u003ch2\u003eDigital I\/O for Synchronizing\u003c\/h2\u003e\n\n\u003cp\u003eFor easy identification of problems, the \u003cstrong\u003eBeagle™ USB 480\u003c\/strong\u003e comes with four digital inputs, which allow you capture USB data from the target device, along with additional hardware events.\u003c\/p\u003e\n\n\u003cp\u003eThe four digital outputs available on the analyzer match the pattern captured data along with idle bus states.\u003c\/p\u003e\n\n\u003ch2\u003eDetect Bus Events and Unexpected Signals\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBeagle™ USB 480 Protocol Analyser\u003c\/strong\u003e can intelligently detect suspend and resume events as well as unexpected signals on the bus.\u003c\/p\u003e\n\n\u003ch2\u003ePacket-Level Timing\u003c\/h2\u003e\n\n\u003cp\u003eGet packet-level timing with 16.67 ns resolution.\u003c\/p\u003e\n\n\u003cdiv class=\"inline-prod-text\"\u003e\n\u003ch2\u003eLow Cost\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBeagle™ USB 480 Protocol Analyser\u003c\/strong\u003e comes complete with \u003cstrong\u003eData Center Software\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe low cost makes it affordable for a company to provide every developer with their own analyser. The benefits of every developer having their own analyser are: .\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLess time wasted because developers do not have to share analysers or go to the lab to debug simple problems.\u003c\/li\u003e\n\t\u003cli\u003eLess wasted time means higher productivity because developers can identify and fix problems quickly and easily with less down-time.\u003c\/li\u003e\n\t\u003cli\u003eHigher productivity means shorter development cycles. Projects get done on time and on budget.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBy saving a day of engineering time, the Beagle™USB 480 analyser will have paid for itself.\u003c\/strong\u003e\u003c\/em\u003e .\u003c\/p\u003e\n\n\u003ch2\u003eFuture-Proof\u003c\/h2\u003e\n\n\u003cp\u003eOnce you have started working with the \u003cstrong\u003eBeagle™ USB 480\u003c\/strong\u003e, you do not have to worry about it getting outdated due to old firmware and compatibility concerns. This analyser is \u003cstrong\u003efield upgradeable\u003c\/strong\u003e via the USB connection and for software and firmware upgrades, leaving you tension-free about falling back with latest software features.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317141181,"sku":"TP320510","price":1375.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp320510-total-phase-beagle-usb-480-tp320510-debug-store-uk-42624459669727.png?v=1717341228"},{"product_id":"beagle-usb-5000-v2-ultimate-total-phase-uk","title":"Total Phase Beagle USB 5000 v2 SuperSpeed Ultimate Edition","description":"\u003ch2\u003eTrue Interactive Real-Time Performance\u003c\/h2\u003e\n\n\u003cp\u003eThe Beagle™USB 5000 v2 Ultimate is a great analyser tool that non-intrusively monitors the \u003cstrong\u003eUSB 2.0 or USB 3.0\u003c\/strong\u003e and allows you to interact and analyse the data as and when it is captured on the bus. You do not have to wait for the data to be downloaded and parsed, just connect Beagle™ to the USB port of your computer and see the data transfer immediately.\u003c\/p\u003e\n\n\u003ch2\u003eFast Data Analysis\u003c\/h2\u003e\n\n\u003cp\u003eFilter and quickly search for data of interest while the capture is still running. Utilize the real-time statistics function of the Data Center Software to view packets and errors on the bus.\u003c\/p\u003e\n\n\u003ch2\u003eEvent-based Triggering\u003c\/h2\u003e\n\n\u003cp\u003eThe Beagle™USB 5000 v2 allows you to create flexible, state-based event triggers with a maximum of 8 independent states and 6 matches for each state for USB 2.0 captures. Match\/Action triggering and filtering function allow you to trigger the capture, filter data, or set external triggers by matching data patterns, packet types, error types, and more.\u003c\/p\u003e\n\n\u003ch2\u003eUnlimited Capture Sizes\u003c\/h2\u003e\n\n\u003cp\u003eAlthough the on-board buffer memory of 2GB of allows you to store a lot of data on the analyser, the actual amount of data that you can capture depends on the buffer of computer under analysis. As USB traffic is transmitted in bursts, the Beagle™ analyser easily catches up with USB traffic and frees the buffer memory for capturing more analysis data.\u003c\/p\u003e\n\n\u003ch2\u003eMulti-Analyser Functionality\u003c\/h2\u003e\n\n\u003cp\u003eSome applications require multiple analysers for monitoring the data transfer across the system. For such cases you can simply take advantage of the advanced sync feature and create a multi-analyser scenario to measure the latency across the system with utmost precision, which was reviously impossible to attain.\u003c\/p\u003e\n\n\u003ch2\u003eReal-Time USB Class-level Decoding with the Data Center Software\u003c\/h2\u003e\n\n\u003cp\u003eThis analyser comes with a Data Center Software that allows you to \u003cstrong\u003eanalyse data in real-time\u003c\/strong\u003e, while the capture is still running. This software also provides Class-level data decoding that makes understanding the USB data easier. Although the Data Center Software supports a number of USB classes, if you are using a class that is not specified in the list, you can save the USB configuration and apply decoding after capturing the data completely. The Data Center Software also allows you to easily share the data you captured with your colleagues all over the world.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch2\u003eHow the Beagle 5000 USB Analyzer Monitors Low-Level Events\u003c\/h2\u003e\n\n\u003cp\u003eThe Beagle USB 5000 v2 standard analyzer can capture, \u003ca href=\"https:\/\/www.totalphase.com\/solutions\/apps\/class-decoding\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003edecode\u003c\/a\u003e, and debug low-level bus events and errors, as well as high-traffic data.\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003eLow-level bus events include K\/J chirps, Reset, Suspend, Resume, In\/NAKs, SOF.\u003c\/li\u003e\n    \u003cli\u003eBeagle USB 5000 v2 analyzer also provides visibility into the USB 3.0 bus, detecting low-level bus events including link training, LFPS polling, training sequences.\u003c\/li\u003e\n    \u003cli\u003eSometimes, the cause is also a PHY error which is a special-case bus event and can also occur due to electrical inconsistencies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe Beagle USB 5000 v2 standard analyzer should help you determine to the cause of issues you described.\u003c\/p\u003e\n\n\u003ch3\u003e Advanced Features for USB Troubleshooting and Analysis\u003c\/h3\u003e\n\n\u003cp\u003eFor more advanced features, consider the \u003ca href=\"https:\/\/thedebugstore.com\/products\/beagle-usb-5000-v2-superspeed-ultimate-total-phase-uk\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBeagle USB 5000 v2 SuperSpeed Protocol Analyzer - Ultimate Edition\u003c\/a\u003e. The Beagle USB 5000 v2 ultimate analyzer supports everything that the standard edition provides, plus the following:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003eSimultaneous Capture Option for USB 3.0 and 2.0 Monitoring\u003c\/li\u003e\n    \u003cli\u003eSuperSpeed Downlink Upgrade\u003c\/li\u003e\n    \u003cli\u003eAdvanced USB 3.0 Triggers (only USB 2.0 Included with Standard)\u003c\/li\u003e\n    \u003cli\u003eUSB 3.0 Advanced State-Based Matching Option\u003c\/li\u003e\n    \u003cli\u003eMulti-Analyzer Synchronization Option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317206717,"sku":"TP322610","price":5580.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp322610-total-phase-beagle-usb-5000-v2-superspeed-ultimate-debug-store-uk-42655596904671.png?v=1717589986"},{"product_id":"total-phase-tp360310-can-bus-terminator-uk","title":"Total Phase CAN Bus Terminator","description":"","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317337789,"sku":"TP360310","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp360310-total-phase-can-bus-terminator-tp360310-72356340367735.png?v=1732757867"},{"product_id":"total-phase-tp280121-cheetah-spi-adapter-uk","title":"Total Phase Cheetah SPI Host Adapter","description":"\u003csection class=\"product-rich\"\u003e\n\u003ch3\u003eProfessional SPI Host Adapter for High-Performance Applications\u003c\/h3\u003e\n\u003cp\u003eThe Total Phase Cheetah SPI Host Adapter represents the pinnacle of SPI interface technology, specifically engineered for applications demanding maximum performance and reliability. Operating at speeds up to 40+ MHz, this professional-grade adapter delivers the performance required for modern embedded system development and production programming environments.\u003c\/p\u003e\n\u003ch4\u003eAdvanced Architecture and Performance\u003c\/h4\u003e\n\u003cp\u003eThe Cheetah adapter's pipelined architecture enables continuous, gapless data shifting that maximises throughput whilst maintaining precise timing control. This advanced design eliminates the performance bottlenecks common in traditional SPI interfaces, delivering sustained data rates that approach the theoretical maximum of the SPI clock frequency.\u003c\/p\u003e\n\u003cdiv class=\"tbl\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPI Clock Range\u003c\/td\u003e\n\u003ctd\u003e0.1 MHz to 40+ MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Overclocking\u003c\/td\u003e\n\u003ctd\u003eUp to 50 MHz (experimental)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlave Select Lines\u003c\/td\u003e\n\u003ctd\u003e3 independent (SS1, SS2, SS3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Interface\u003c\/td\u003e\n\u003ctd\u003eHigh-Speed USB 2.0 (480 Mbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget Power Supply\u003c\/td\u003e\n\u003ctd\u003e+5V, 25mA maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4\u003eComprehensive Software Ecosystem\u003c\/h4\u003e\n\u003cp\u003eThe Cheetah adapter includes a complete software suite designed to maximise productivity across the entire development lifecycle. Flash Center Software provides professional-grade memory programming capabilities with support for hundreds of SPI flash and EEPROM devices through an extensible XML-based parts library.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e\n\u003ch4\u003eGang Programming Capability\u003c\/h4\u003e\n\u003cp\u003eConnect multiple Cheetah adapters to a single computer for parallel programming operations, dramatically reducing production line cycle times whilst maintaining programming reliability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eWiring Quick-Start\u003c\/h4\u003e\n\u003cp\u003eThe Cheetah adapter connects to target systems via a standard 10-pin ribbon cable with 2.54mm (0.1\") pitch IDC connector. The pin assignment follows industry standards for maximum compatibility:\u003c\/p\u003e\n\u003cdiv class=\"tbl\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eSS2\u003c\/td\u003e\n\u003ctd\u003eSlave Select 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround Reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eSS3\u003c\/td\u003e\n\u003ctd\u003eSlave Select 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eNC\/+5V\u003c\/td\u003e\n\u003ctd\u003eTarget Power (Optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eMISO\u003c\/td\u003e\n\u003ctd\u003eMaster In, Slave Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eNC\/+5V\u003c\/td\u003e\n\u003ctd\u003eTarget Power (Optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eSCLK\u003c\/td\u003e\n\u003ctd\u003eSerial Clock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eMOSI\u003c\/td\u003e\n\u003ctd\u003eMaster Out, Slave In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eSS1\u003c\/td\u003e\n\u003ctd\u003ePrimary Slave Select\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround Reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"imgph\"\u003e\u003c\/div\u003e\n\u003ch4\u003eEssential Wiring Considerations\u003c\/h4\u003e\n\u003cp\u003eProper grounding is critical for reliable operation. Connect both ground pins (2 and 10) to establish a solid ground reference between the Cheetah adapter and target system. The adapter provides optional +5V target power on pins 4 and 6, capable of supplying up to 25mA for low-power target devices.\u003c\/p\u003e\n\u003ch4\u003eProgramming Example Code\u003c\/h4\u003e\n\u003cp\u003eThe following Python example demonstrates basic SPI communication using the Cheetah API:\u003c\/p\u003e\n\u003cpre\u003e\u003ccode\u003eimport cheetah_py as ch # Open Cheetah adapter handle = ch.ch_open(0) if handle \u0026lt;= 0: print(\"Unable to open Cheetah adapter\") exit() # Configure SPI mode and bitrate ch.ch_spi_configure(handle, ch.CH_SPI_POL_RISING_FALLING, ch.CH_SPI_PHASE_SAMPLE_SETUP, ch.CH_SPI_BITORDER_MSB, 0x0) ch.ch_spi_bitrate(handle, 10000) # 10 MHz # Clear command queue and setup transaction ch.ch_spi_queue_clear(handle) ch.ch_spi_queue_oe(handle, 1) # Enable outputs ch.ch_spi_queue_ss(handle, 0x1) # Assert SS1 ch.ch_spi_queue_byte(handle, 1, 0x9f) # Send READ ID command ch.ch_spi_queue_byte(handle, 3, 0x00) # Read 3 bytes response ch.ch_spi_queue_ss(handle, 0x0) # Deassert SS1 # Execute transaction (ret, data_in) = ch.ch_spi_batch_shift(handle, 0) print(f\"Device ID: {data_in:02x} {data_in:02x} {data_in:02x}\")[1][2][3] ch.ch_close(handle)\u003c\/code\u003e\u003c\/pre\u003e\n\u003ch4\u003eFlash Memory Programming Workflow\u003c\/h4\u003e\n\u003cp\u003eProgramming SPI flash memory with the Cheetah adapter and Flash Center Software follows a streamlined workflow optimised for both development and production environments:\u003c\/p\u003e\n\u003col class=\"spec-note\"\u003e\n\u003cli\u003eConnect target flash device via ribbon cable\u003c\/li\u003e\n\u003cli\u003eLaunch Flash Center Software and detect adapter\u003c\/li\u003e\n\u003cli\u003eSelect memory device from extensive parts library\u003c\/li\u003e\n\u003cli\u003eLoad programming data (binary, hex, or S-record formats)\u003c\/li\u003e\n\u003cli\u003eExecute erase, program, and verify sequence\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"callout\"\u003e\n\u003ch5\u003ePerformance Benchmark\u003c\/h5\u003e\n\u003cp\u003eThe Cheetah adapter can erase, program, and verify a typical 1MB SPI flash memory in approximately 23 seconds, with the main limitation being the flash memory's page commit time rather than the adapter's transfer speed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eDevelopment Environment Integration\u003c\/h4\u003e\n\u003cp\u003eCross-platform API support enables seamless integration into existing development workflows. The Cheetah API provides comprehensive control over all adapter functions, with example code available for C\/C++, Python, C#, and LabVIEW development environments.\u003c\/p\u003e\n\u003cp\u003eFor automated testing and production environments, XML batch scripting capabilities in Control Center Serial Software enable complex test sequences to be executed without manual intervention, improving both efficiency and repeatability.\u003c\/p\u003e\n\u003ch4\u003eQuality and Compliance\u003c\/h4\u003e\n\u003cp\u003eManufactured to professional standards with CE, REACH, and RoHS compliance, the Cheetah adapter meets international regulatory requirements for professional and industrial applications. Each unit carries a 2-year warranty from Debug Store: Total Phase's standard hardware warranty is 12 months, and Debug Store covers the second year itself, at no extra cost.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317403325,"sku":"TP280121","price":475.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp280121-total-phase-cheetah-spi-host-adapter-tp280121-debug-store-uk-42654128275679.png?v=1717575587"},{"product_id":"total-phase-tp240810-dvi-ddc-breakout-cable","title":"Total Phase TP240810 DVI DDC Breakout Cable","description":"\u003cp\u003eThe DVI DDC Breakout Cable is a standard 2 metre DVI-D single link cable (DVI-male to DVI-male) with an additional 5x2 0.100\" pitch keyed box connector to provide a convenient way to access the Display Data Channel (DDC) lines with a Beagle™ I2C\/SPI Protocol Analyser or an Aardvark™ I2C\/SPI Host Adapter\u003c\/p\u003e\n\n\u003ctable border=\"0\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px;\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp\u003e \u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd\u003e\n            \u003ctable style=\"border-spacing:0px;font-size:13px;font-family:arial, helvetica, 'Luxi Sans', sans-serif;font-style:normal;font-variant:normal;font-weight:normal;letter-spacing:normal;line-height:16px;text-align:left;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;\"\u003e\n                \u003ctbody\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003eDVI Pin\u003c\/strong\u003e\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003e10-pin Header Pin\u003c\/strong\u003e\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SCL\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 6\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 1\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SDA\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 7\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 3\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC GND\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 15\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 2\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e .\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317599933,"sku":"TP240810","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-dvi-ddc-breakout-cable-23151993651389.jpg?v=1685009283"},{"product_id":"total-phase-tp240710-hdmi-ddc-breakout-cable","title":"Total Phase TP240710 HDMI DDC Breakout Cable","description":"\u003cp\u003eThe HDMI DDC Breakout Cable is a standard 2 metre HDMI cable (HDMI-male to HDMI-male) with an additional 5x2 0.100\" pitch keyed box connector to provide a convenient way to access the Display Data Channel (DDC) lines with a Beagle™ I2C\/SPI Protocol Analyser or an Aardvark™ I2C\/SPI Host Adapter.\u003c\/p\u003e\n\n\u003ctable border=\"0\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px;\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp\u003e \u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd\u003e\n            \u003ctable style=\"border-spacing:0px;font-size:13px;font-family:arial, helvetica, 'Luxi Sans', sans-serif;font-style:normal;font-variant:normal;font-weight:normal;letter-spacing:normal;line-height:16px;text-align:left;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;\"\u003e\n                \u003ctbody\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003eHDMI Pin\u003c\/strong\u003e\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003e10-pin Header Pin\u003c\/strong\u003e\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SCL\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 15\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 1\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SDA\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 16\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 3\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC GND\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 17\u003c\/td\u003e\n                        \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 2\u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317862077,"sku":"TP240710","price":108.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-hdmi-ddc-breakout-cable-23152019701949.jpg?v=1685026738"},{"product_id":"total-phase-tp360110-komodo-can-duo-adapter","title":"Total Phase Komodo CAN Duo Interface","description":"\u003ch3\u003eFull-Featured CAN Adapter\u003c\/h3\u003e\n\n\u003cp\u003eThe Komodo CAN Duo Interface can operate as a CAN node, to send and receive messages, on up to two different CAN networks. Communicate with any type of CAN network, from automotive systems to industrial controls. The Komodo interface operates at up to a maximum bitrate of 1 Mbps.\u003c\/p\u003e\n\n\u003ch3\u003eFlexible Design\u003c\/h3\u003e\n\n\u003cp\u003eConfigure each CAN channel independently as either an adapter or a non-intrusive analyser. Communicate and\/or monitor two different CAN buses with a single Komodo interface.\u003c\/p\u003e\n\n\u003ch3\u003eTrue Real-Time Monitoring\u003c\/h3\u003e\n\n\n\n\u003cp\u003enon-intrusively monitor up to 2 different CAN buses and see the data as it is captured. Each channel of the Komodo interface is independently, galvanically isolated and can capture CAN data at up to 1 Mbps.\u003c\/p\u003e\n\n\u003ch3\u003eGPIO\u003c\/h3\u003e\n\n\u003cp\u003eThe 8-GPIO pins can be configured for input or output, allowing the Komodo interface to communicate with external logic.\u003c\/p\u003e\n\n\u003ch3\u003eIndustrial Grade\u003c\/h3\u003e\n\n\u003cp\u003eThe Komodo CAN Duo Interface is rated for operating temperatures from -40°C to +85°C (non-condensing).\u003c\/p\u003e\n\n\u003ch3\u003eLow Cost\u003c\/h3\u003e\n\n\u003cp\u003e\u003cimg alt=\"No Hidden Fees\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/www.totalphase.com\/media\/wysiwyg\/no-hidden-fees.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/no-hidden-fees_1.png?v=1627554212\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Komodo CAN Duo Interface comes complete with a royalty-free API.\u003c\/p\u003e\n\n\u003cp\u003eThe low cost makes it affordable for a company to provide every developer with their own interface. The benefits of every developer having their own interface are:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eLess time wasted\u003c\/strong\u003e because developers do not have to share tools or go to the lab to debug simple problems.\u003c\/li\u003e\n\t\u003cli\u003eLess wasted time means \u003cstrong\u003ehigher productivity\u003c\/strong\u003e because developers can identify and fix problems quickly and easily with less down-time.\u003c\/li\u003e\n\t\u003cli\u003eHigher productivity means \u003cstrong\u003eshorter development cycles\u003c\/strong\u003e. Projects get done on time and on budget.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eBy saving just a few hours of engineering time, the Komodo CAN Duo Interface will have paid for itself.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFuture-Proof\u003c\/h3\u003e\n\n\u003cp\u003eThe Komodo interface is completely field-upgradable via USB. Total Phase is committed to improving the Komodo interface and making these improvements available to our customers.\u003c\/p\u003e\n\n\u003cp\u003eYou will never have to worry about being out of step with the latest software features.\u003c\/p\u003e\n\n\u003ch3\u003eMinimum Hardware requirements\u003c\/h3\u003e\n\n\u003cp\u003e• Intel or AMD processor operating at 2 gigahertz (GHz) or faster\u003cbr\u003e\n• 1 gigabyte (GB) physical RAM (32-bit) or 2 GB RAM (64- bit)\u003cbr\u003e\n• 2 GB or more available hard disk space\u003cbr\u003e\n• High-speed USB port\u003cbr\u003e\n• VGA capable of 1024x768 or higher screen resolution\u003cbr\u003e\n• Internet access is helpful\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768317927613,"sku":"TP360110","price":650.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp360110-total-phase-komodo-can-duo-interface-42654260101343.png?v=1717577205"},{"product_id":"total-phase-tp320610-usb-mini-otg-cable-set","title":"Total Phase TP320610 USB Mini OTG Cable Set","description":"\u003cp\u003eThe short lengths of these cables ensure that the total cable length between host and device stays below the specified minimum to avoid data timing issues.\u003c\/p\u003e\n\n\u003cp\u003eThese cables are rated for high-speed data transmission.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318156989,"sku":"TP320610","price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-usb-mini-otg-cable-set-28938642423997.jpg?v=1685180999"},{"product_id":"total-phase-tp-240212-10-pin-split-cable-uk","title":"Total Phase TP240212 10 pin Split Cable","description":"\u003cp\u003eThe Total Phase TP240212 cable is for connecting the Aardvark™, Beagle™ or Cheetah™ to header pins or IC legs on your target boards.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318353597,"sku":"TP240212","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp240212-total-phase-10-pin-split-cable-tp240212-72356315726199.png?v=1732757875"},{"product_id":"total-phase-tp240411-split-cable-with-grabbers-uk","title":"Total Phase TP240411 Split Cable with Grabbers","description":"\u003cp\u003eThe 10-Pin Grabber Clip Split Cable has a 10-pin box header that attaches to the ribbon cable. Each individual lead has a different colour and is labelled with the pin name so that they are easy to identify.\u003c\/p\u003e\n\n\u003cp\u003e10 - individually colour coded grabber clips are included:.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Grabber Probe Clips\" class=\"fr-fic fr-dii\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"http:\/\/www.thedebugstore.com\/files\/Images\/Inline\/Inline-Probe-Drawing-1.jpg\" style=\"width:300px;height:127px;\"\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe connector is a standard 5x2 0.100\" (2.54mm) pitch IDC type keyed box connector. Each individual lead is terminated with a single pin crimp connector with the same 0.100\" (2.54mm) pitch. The cable is only 5\" (12.7cm) long to minimize signal degradation.\u003c\/p\u003e\n\n\u003ch3\u003eUniversal Use\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e10-Pin Grabber Clip Split Cable\u003c\/strong\u003e is an incredibly useful tool that will save you from having to create or purchase adapter boards for your 10-pin ribbon cable. Although it is labelled with the Aardvark™ I2C\/SPI Host Adapter and Beagle™ I2C\/SPI Protocol Analyser specific pinout, this split cable is universally adaptable to a variety of applications.\u003c\/p\u003e\n\n\u003cp\u003eThis split cable will connect to any standard 0.100\" (2.54mm) pitch 10-pin keyed female IDC-type connector.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318386365,"sku":"TP240411","price":70.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-total-phase-tp240411-split-cable-with-grabbers-38321715445983.jpg?v=1685072283"},{"product_id":"total-phase-tp240910-vga-ddc-breakout-cable","title":"Total Phase TP240910 VGA DDC Breakout Cable","description":"\u003cp\u003eThe VGA DDC Breakout Cable is a standard 2 metre VGA cable (HD15-male to HD15-male) with an additional 5x2 0.100\" pitch keyed box connector to provide a convenient way to access the Display Data Channel (DDC) lines with a Beagle™ I2C\/SPI Protocol Analyser or an Aardvark™ I2C\/SPI Host Adapter.\u003c\/p\u003e\n\n\u003ctable style=\"border-spacing:0px;font-size:13px;font-family:arial, helvetica, 'Luxi Sans', sans-serif;font-style:normal;font-variant:normal;font-weight:normal;letter-spacing:normal;line-height:16px;text-align:left;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003eVGA Pin\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003e\u003cstrong\u003e10-pin Header Pin\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SCL\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 15\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 1\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC SDA\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 12\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 3\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;\"\u003eDDC GND\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 10\u003c\/td\u003e\n            \u003ctd class=\"center\" style=\"margin:0px;padding:.5em;border-right-width:1px;border-right-style:solid;vertical-align:top;text-align:center;\"\u003ePin 2\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768318451901,"sku":"TP240910","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp240910-total-phase-vga-ddc-breakout-cable-tp240910-72357991874935.png?v=1732757878"},{"product_id":"total-phase-tp323610-beagle-usb-480-power-ultimate-uk","title":"Total Phase Beagle USB 480 Power - Ultimate","description":"\u003ch3\u003eCurrent\/Voltage Monitor\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eReal-time graphing of VBUS current and voltage values\u003c\/li\u003e\n    \u003cli\u003eInteractive and bi-directional correlation of current\/voltage values with USB data\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eUSB 2.0 Advanced Triggers\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eCreate state-based and flexible trigger conditions based on data patterns, packet types, error types, events, and other criteria\u003c\/li\u003e\n    \u003cli\u003eHardware packet filtering\u003c\/li\u003e\n    \u003cli\u003eUp to eight independent states and six matches per state for USB 2.0 captures\u003c\/li\u003e\n    \u003cli\u003eDigital inputs and outputs to synchronize with oscilloscopes or logic analyzers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eHigh Performance Hardware Buffer\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e256 MB capacity\u003c\/li\u003e\n    \u003cli\u003eLarge circular buffer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eReal-Time Non-Intrusive Monitoring\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eReal-time data analysis and display\u003c\/li\u003e\n    \u003cli\u003eAutomatic bus speed detection\u003c\/li\u003e\n    \u003cli\u003eLow\/Full\/High-Speed USB 2.0\u003c\/li\u003e\n    \u003cli\u003eCapture traces to \u0026gt;25 GB\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReal-Time USB Class-Level Decoding\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eHID, Audio, Video, Still Image, Printer\u003c\/li\u003e\n    \u003cli\u003eMass Storage, Hub\u003c\/li\u003e\n    \u003cli\u003eNetwork, Mobile, CDC\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eQuality\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eCE, RoHS\u003c\/li\u003e\n    \u003cli\u003e2-year warranty from Debug Store\u003c\/li\u003e\n    \u003cli\u003eManufacturing: ISO 9001, ISO 13485, AS9100C, ITAR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768322384061,"sku":"TP323610","price":2680.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp323610-total-phase-beagle-usb-480-power-tp323610-72356360487287.png?v=1732758043"},{"product_id":"op-sb5gl-expansion-kit-for-ttl-i2c-and-spi-le-2500-3500-lineeye-uk","title":"Lineeye OP-SB5GL Expansion kit for TTL, I2C, SPI","description":"\u003cp\u003eLineeye OP-SB5GL Expansion kit for TTL, I2C and SPI (LE-2500\/3500).\u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768323563709,"sku":"OP-SB5GL","price":455.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-analyser-accessory-expansion-kit-for-ttl-i2c-spi-for-le-3500-x-r-2500-x-r-1500r-23152085467325.jpg?v=1685220233"},{"product_id":"total-phase-tp320221-beagle-usb-12-analyser-uk","title":"Total Phase Beagle USB 12 Analyser","description":"\u003ch3\u003eBeagle USB 12 Galvanic Isolation\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eBeagle USB 12\u003c\/strong\u003e \u003c\/em\u003eallows you passively monitor full-speed and low-speed USB devices by a simple inline connection with the device. The analyser is galvanically isolated, hence it does not affect the system under test or distort the test results in any way. It also allows you to monitor high-speed devices by connecting them through a Full-speed hub.\u003c\/p\u003e\n\n\u003ch3\u003eStreams Captured Data to PC up to 480Mbps\u003c\/h3\u003e\n\n\u003cp\u003eThis monitor provides limitless capture of data in real-time. The amount of data captured only depends on the amount of RAM available on the test computer. This high-speed, low-power device provides exceptional data transfer speed of up to 480 Mbps and does not require any external power adapter. It is a bus-powered device that draws power from the USB port itself. This prevents setting up of any complex triggers.\u003c\/p\u003e\n\n\u003ch3\u003eField Upgradable\u003c\/h3\u003e\n\n\u003cp\u003eThe Beagle™ USB 12 is field-upgradeable, which means that you will always stay up-to-date with the latest software and firmware that are compatible with modern machines and operating systems. There is no additional charge for software updates.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768324087997,"sku":"TP320221","price":540.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-tp320221-total-phase-beagle-usb-12-analyser-tp320221-debug-store-uk-42624441188575.png?v=1717341045"},{"product_id":"lipowsky-if-can-bc-reve02-can-bus-high-low-converter","title":"Lipowsky IF-CAN-BC-REVE02 CAN Bus High-Low Speed Converter","description":"","brand":"Lipowsky Industrie Elektronik GmbH","offers":[{"title":"Default Title","offer_id":37768328577213,"sku":"IF-CAN-BC-REVE02","price":115.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lipowsky-industrie-elektronik-gmbh-converter-lineeye-if-can-bc-reve02-can-bus-high-low-converter-29194681155773.jpg?v=1685037178"},{"product_id":"p-20s-replacement-nimh-battery-pack-for-le-8200-e-lineeye-uk","title":"Lineeye P-20S NiMH battery pack","description":"\u003cp\u003eReplacement NiMH Battery Pack for LE-8200-E.\u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768362819773,"sku":"P-20S","price":135.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-battery-nimh-battery-pack-for-le-8200a-8200-23152087990461.jpg?v=1685144094"},{"product_id":"lipowsky-baby-lin-rc-ii-lin-bus-adapter-uk","title":"Lipowsky Baby-LIN-RC-II LIN Bus Simulator","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSupports LIN-bus versions 1.2, 1.3, 2.0, 2.1 and 2.2.\u003c\/li\u003e\n\t\u003cli\u003eBaby-LIN-RC-II offers all features of the standard\u0026gt;Baby-LIN-II.\u003c\/li\u003e\n\t\u003cli\u003eCan be used as stand-alone remote control for LIN-bus.\u003c\/li\u003e\n\t\u003cli\u003eIn addition, a freely programmable membrane keypad with 6 keys is integrated.\u003c\/li\u003e\n\t\u003cli\u003eThrough optional shift functions (F5\/F6) it is possible to program up to 12 virtual keys.\u003c\/li\u003e\n\t\u003cli\u003eAny LIN-command can be assigned to the individual keys.\u003c\/li\u003e\n\t\u003cli\u003eStarting from an LDF (LIN Description File), it just takes a few minutes to realize a complete manual control unit for your LIN-bus.\u003c\/li\u003e\n\t\u003cli\u003eSimulates your LIN-master and if applicable additional LIN-slaves (system simulation).\u003c\/li\u003e\n\t\u003cli\u003ePerfect for demonstration, test applications, service and all other situations, where LIN-devices have to be handled manually.\u003c\/li\u003e\n\t\u003cli\u003eThe device supports the expanded SDF-V3 format.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eSoftware compatibility\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eWindows XP\u003c\/li\u003e\n\t\u003cli\u003eWindows Vista\u003c\/li\u003e\n\t\u003cli\u003eWindows 7 (32\/64 Bit)\u003c\/li\u003e\n\t\u003cli\u003eWindows 8 (32\/64 Bit)\u003c\/li\u003e\n\t\u003cli\u003eWindows 10 (32\/64 Bit)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lipowsky Industrie Elektronik GmbH","offers":[{"title":"Default Title","offer_id":37768362852541,"sku":"8000995\/8","price":690.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lipowsky-industrie-elektronik-gmbh-pc-interface-lipowsky-baby-lin-rc-ii-lin-bus-adapter-29194691772605.jpg?v=1685096024"},{"product_id":"total-phase-tp320310-extension-cable-for-beagle-usb-12-6","title":"Total Phase TP320310 Extension Cable for Beagle USB 12 6\"","description":"\u003cp\u003eConnect USB devices with captive USB-A connectors quickly and easily to the Beagle USB 12 Protocol Analyzer or the Beagle USB 480 Protocol Analyzer with the USB Extension Cable.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768365637821,"sku":"TP320310","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-cable-extension-cable-for-beagle-usb-12-6-28938487038141.jpg?v=1685098553"},{"product_id":"lineeye-le-650h2-advanced-usb-protocol-analyser-uk","title":"Lineeye LE-650H2-A Advanced USB 2.0 Protocol Analyzer","description":"\u003cp\u003eWhile recording 480Mbps high-speed transfer data of USB 2.0 to the hard disk of the PC via a large capacity memory of LE-650H2-A, displays the contents of that data on the screen of the PC in detail at real time. It can identify PING and the split transaction at high speed.\u003c\/p\u003e","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768370847933,"sku":"LE-650H2-A","price":965.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-protocol-analyser-le-650h2-advanced-usb-2-0-protocol-analyzer-38119566442719.jpg?v=1684964100"},{"product_id":"lipowsky-8001054-baby-lin-ii-lin-bus-simulator-uk","title":"Lipowsky Baby-LIN-II LIN Bus Simulator","description":"\u003cp\u003eThe \u003cstrong\u003eLipowsky Baby-LIN-II\u003c\/strong\u003e is a compact and cost-effective way to control LIN-Bus equipped devices with the help of a USB port of a standard computer. This controller features an integrated 32-bit microcontroller that is responsible for important tasks like LIN-bus protocol decoding and message scheduling. It comes with the LINWorks software suite that contains application programs, which along with a DLL, allows you to access the LIN-Bus of the controller. The LIN-Bus can also be accessed directly by the DLL-API that is easy to use and allows you to fetch or put frames, respective signals to the \u003cstrong\u003eLIN-Bus\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eOne of the most unique features of \u003cstrong\u003eBaby-LIN\u003c\/strong\u003e is that it can be powered either the USB port or from the LIN-Bus, allowing it to be as a standalone device, without a computer. The macro feature of this LIN-Bus allows it to store commands sequences, which can be later used for various tasks like, running an endless loop of tests on a LIN-equipped ECU.\u003c\/p\u003e\n\n\u003cp\u003eThe voltage provided at the LIN-Bus side can vary between 9 volts to 36 volts, and since the LIN-bus is isolated from the USB side, there are no electrical interference between the computer and on board electronics of the controller. The flash-based firmware storage of the Baby-LIN allows easy updates and changes of the LIN-bus specifications.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eLINWorks software\u003c\/strong\u003e suite that comes along with the Baby-LIN features various application programs. The \u003cstrong\u003eLDF-Editor\u003c\/strong\u003e allows you to create, inspect, and edit \u003cstrong\u003eLDF\u003c\/strong\u003es. The Session Configurator allows you to define additional session parameters, like choosing which nodes should be available and which nodes should be simulated. It allows the Baby-LIN to play the role of both, master and slave nodes. The \u003cstrong\u003eLIN-Bus\u003c\/strong\u003e can also work without any slave nodes, simulating all nodes at the same time.\u003c\/p\u003e","brand":"Lipowsky Industrie Elektronik GmbH","offers":[{"title":"Default Title","offer_id":37768370880701,"sku":"8001054","price":550.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lipowsky-industrie-elektronik-gmbh-pc-adapter-lipowsky-baby-lin-ii-lin-bus-adapter-30244858396861.jpg?v=1685015207"},{"product_id":"hantek-automotive-diagnostics-6074be-kit-iii-4-ch-70mhz-64k","title":"Hantek Automotive Diagnostics 6074BE Kit III, 4-ch, 70MHz, 64K","description":"\u003ch3 align=\"left\"\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eStandard equipped over 80 types of automotive measurement function\u003c\/li\u003e\n    \u003cli\u003eFit for portable computers, table PCs. Supports WIN10\/ WIN8\/WIN7 etc.\u003c\/li\u003e\n    \u003cli\u003eUSB 2.0 interface plug and play, and no need extra power supply;\u003c\/li\u003e\n    \u003cli\u003eGreat functionality, More than 20 kinds of automatic measurement functions, PASS\/FAIL Check function. Resourceful trigger function, dynamic cursor tracking, waveform record and replay function.\u003c\/li\u003e\n    \u003cli\u003eThe outer case is made from Anodised aluminium and has great heat resistance and abrasive resistance with a hardwearing appearance.\u003c\/li\u003e\n    \u003cli\u003e4 channels oscilloscope, 1GSa\/s real time sampling rate, 2mV-10V\/DIV high input sensitivity and large input range, 70MHz high bandwidth,\u003c\/li\u003e\n    \u003cli\u003eThe waveform data can be outputted to EXCEL,BMP and JPG files.\u003c\/li\u003e\n    \u003cli\u003eWaveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.\u003c\/li\u003e\n    \u003cli\u003eFFT spectrum analyzer \u003c\/li\u003e\n    \u003cli\u003eOne computer can connect with multiple oscilloscopes, to expand the number of channels\u003c\/li\u003e\n    \u003cli\u003eProvide secondary development library DLL; Provide Labview\\VB\\VC\\QT developing examples.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg alt=\"Hantek 6074BE Accessory Kit\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/20201015091429_1788417988_1.jpg?v=1635856586\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" width=\"581\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eModel\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003eHantek-6074BE\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eBandwidth\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e70MHz\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eAutomotive Measurement Function\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003eIntake manifold vacuum \u0026amp; ignition, Petrol fumes adjusting valve vacuum \u0026amp; ignition, Idle exhaust ignition, Starting exhaust ignition;\u003c\/p\u003e\n\n            \u003cp align=\"left\"\u003eSensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position;\u003c\/p\u003e\n\n            \u003cp align=\"left\"\u003eCAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus;\u003c\/p\u003e\n\n            \u003cp\u003ePerformer: Petrol\/Diesel;\u003c\/p\u003e\n\n            \u003cp\u003eStarter and charging circuits\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eChannel\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e4-ch\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eReal-time Sampling Rate\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e1GSa\/s\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eMemory Depth\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e64K\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eTime Base Precision\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e±50ppm\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eTime Base Range\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e2ns\/div-1000s\/div (1-2-4 sequences)\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eInput Impedance\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e1MΩ 25pF\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eInput Sensitivity\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e2mV\/div～10V\/div \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eVertical Resolution\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e8Bit\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eVertical Displacement Range\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e2mV ~ 10V\/div @ x1 probe; 20mV ~ 100V\/div @ x10 probe；\u003cbr\u003e\n             200mV ~ 1000V\/div @ x100 probe; 2V ~ 10000V\/div @ x1000 probe\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eDC Gain Accuracy\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e±3%\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eBandwidth Limit\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e20MHz\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eTrigger Mode\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003eEdge, Pulse, Video, Alternative\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eTrigger Source\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003eCH1, CH2, CH3,CH4\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eWaveform Signal Process\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e+,-,x,÷,FFT, Invert\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eCursors Measurement\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003eCross, Trace, Horizontal, Vertical\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eAuto Measurement\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003eVpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eVolume\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e175mm * 105mm * 25mm\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eWeight\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e0.9KG\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \u003cp align=\"left\"\u003eAccessory\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd width=\"476\"\u003e\n            \u003cp align=\"left\"\u003e2 passive probes, 2 gator clip lines\u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Hantek Electronic Co Ltd","offers":[{"title":"Default Title","offer_id":37768377008317,"sku":"HANTEK-6074BE Kit III","price":430.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/hantek-electronic-co-ltd-automotive-test-hantek-automotive-diagnostics-6074be-kit-iii-4-ch-70mhz-64k-30253729087677.jpg?v=1685004231"},{"product_id":"hantek-365c-data-logger-bluetooth","title":"Hantek-365C Bluetooth\/USB Data Logger - Multimeter Recording","description":"\u003csection class=\"product-rich\"\u003e\n\u003ch2\u003eWireless Data Logging Multimeter with True RMS Measurement\u003c\/h2\u003e\n\u003cp\u003eThe Hantek-365C is a professional data logger that combines the functionality of a digital multimeter with wireless Bluetooth connectivity and long-term data recording capabilities. This 6000-count instrument measures voltage, current, resistance, capacitance, diode characteristics, and temperature whilst automatically logging readings for trend analysis and equipment monitoring.\u003c\/p\u003e\n\u003ch3\u003eMeasurement Capabilities\u003c\/h3\u003e\n\u003cdiv class=\"tbl\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003cth\u003eRange\u003c\/th\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003cth\u003eResolution\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Voltage\u003c\/td\u003e\n\u003ctd\u003e60mV to 800V\u003c\/td\u003e\n\u003ctd\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd\u003e10µV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Voltage\u003c\/td\u003e\n\u003ctd\u003e60mV to 600V\u003c\/td\u003e\n\u003ctd\u003e±1%±3 digit\u003c\/td\u003e\n\u003ctd\u003e10µV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Current\u003c\/td\u003e\n\u003ctd\u003e60mA to 10A\u003c\/td\u003e\n\u003ctd\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd\u003e10µA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Current\u003c\/td\u003e\n\u003ctd\u003e60mA to 10A\u003c\/td\u003e\n\u003ctd\u003e±1.5%±3 digit\u003c\/td\u003e\n\u003ctd\u003e10µA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003e600Ω to 60MΩ\u003c\/td\u003e\n\u003ctd\u003e±1%±3 digit\u003c\/td\u003e\n\u003ctd\u003e0.1Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e40nF to 400µF\u003c\/td\u003e\n\u003ctd\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd\u003e10pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003e-200°C to 1000°C\u003c\/td\u003e\n\u003ctd\u003e±2%±3 digit\u003c\/td\u003e\n\u003ctd\u003e0.1°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eWireless Connectivity and Data Logging\u003c\/h3\u003e\n\u003cp\u003eThe 365C features integrated Bluetooth connectivity for wireless data transmission to Windows PCs, enabling remote monitoring of critical measurements in hazardous or inaccessible locations. The built-in rechargeable lithium battery provides portable operation for extended field measurements.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e The 365C model does not support iPad connectivity. For iPad compatibility, select the \u003ca href=\"https:\/\/thedebugstore.com\/products\/hantek-365e-data-logger\"\u003eHantek-365E\u003c\/a\u003e or \u003ca href=\"https:\/\/thedebugstore.com\/products\/hantek-365f-data-logger\"\u003eHantek-365F\u003c\/a\u003e models.\u003c\/div\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eSoftware Features\u003c\/h3\u003e\n\u003cp\u003eThe included Windows software provides real-time trend charting with configurable data intervals from 1 to 100 seconds. Measurements are displayed both numerically and graphically, with data export capabilities to .txt format for analysis in spreadsheet applications.\u003c\/p\u003e\n\u003ch4\u003eWiring Quick-Start\u003c\/h4\u003e\n\u003cdiv class=\"imgph\"\u003eBasic voltage measurement connection diagram\u003c\/div\u003e\n\u003cp\u003eFor basic voltage measurements:\u003c\/p\u003e\n\u003cpre\u003e\u003ccode\u003e1. Connect black lead to COM terminal 2. Connect red lead to V\/Ω\/C terminal 3. Connect leads to measurement points 4. Select voltage function on software interface\u003c\/code\u003e\u003c\/pre\u003e\n\u003cp\u003eFor current measurements up to 600mA, use the mA terminal. For currents above 600mA up to 10A, connect the red lead to the dedicated 10A terminal.\u003c\/p\u003e\n\u003ch4\u003eTemperature Measurement Setup\u003c\/h4\u003e\n\u003cp\u003eConnect the included K-type thermocouple sensor using the temperature measurement configuration. The software automatically switches between Celsius and Fahrenheit display modes.\u003c\/p\u003e\n\u003cdiv class=\"spec-note\"\u003e\n\u003cstrong\u003eSafety Rating:\u003c\/strong\u003e Maximum input voltage AC: 600V, DC: 800V. Maximum input current: 10A AC\/DC. Input impedance: 10MΩ.\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Hantek Electronic Co Ltd","offers":[{"title":"Default Title","offer_id":37768377237693,"sku":"HANTEK-365C","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/hantek-electronic-co-ltd-data-logger-hantek-365c-bluetooth-usb-data-logger-36520714436831.jpg?v=1685179561"},{"product_id":"hantek-365d-data-logger-uk","title":"Hantek-365D Bluetooth\/USB Data Logger","description":"\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style=\"width:495pt;\" width=\"659\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"141\"\u003eFunction \u003c\/td\u003e\n\u003ctd width=\"168\"\u003eRange\u003c\/td\u003e\n\u003ctd width=\"185\"\u003eAccuracy\u003c\/td\u003e\n\u003ctd width=\"165\"\u003eResolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"120\" rowspan=\"6\" width=\"141\"\u003eDC Voltage\u003c\/td\u003e\n\u003ctd width=\"168\"\u003e60.00mV\u003c\/td\u003e\n\u003ctd rowspan=\"6\" width=\"185\"\u003e±1% ±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10uV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.00mV\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100uV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.00V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e60.00V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e60.00V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e800V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"100\" rowspan=\"5\" width=\"141\"\u003eAC Voltage\u003c\/td\u003e\n\u003ctd width=\"168\"\u003e60.00mV\u003c\/td\u003e\n\u003ctd rowspan=\"5\" width=\"185\"\u003e±1%±3 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10uV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.00mV\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100uV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.00V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e60.00V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.0V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"80\" rowspan=\"4\" width=\"141\"\u003eDC Current\u003c\/td\u003e\n\u003ctd width=\"168\"\u003e60.00mA\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1.5%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10uA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.00mA\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100uA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.000A\u003c\/td\u003e\n\u003ctd rowspan=\"2\" width=\"185\"\u003e±1.5%±3 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e10.00A\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"80\" rowspan=\"4\" width=\"141\"\u003eAC Current\u003c\/td\u003e\n\u003ctd width=\"168\"\u003e60.00mA\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1.5%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10uA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.00mA\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100uA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.000A\u003c\/td\u003e\n\u003ctd rowspan=\"2\" width=\"185\"\u003e±1.5%±3 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e10.00A\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"120\" rowspan=\"6\" width=\"141\"\u003eResistance \u003c\/td\u003e\n\u003ctd width=\"168\"\u003e600\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1%±3 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e0.1Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.000 K\u003c\/td\u003e\n\u003ctd rowspan=\"4\" width=\"185\"\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e60.00 K\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.0 K\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.000 M\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e60.00 M\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1.5%±3 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"120\" rowspan=\"6\" width=\"141\"\u003eCapacitance\u003c\/td\u003e\n\u003ctd width=\"168\"\u003e40.00nF\u003c\/td\u003e\n\u003ctd rowspan=\"5\" width=\"185\"\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e400.00nF\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e4.000uF\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1nF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e40.00uF\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e400.0uF\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\" height=\"20\" width=\"518\"\u003eAttention: The smallest capacitance value that can be measured in 5nF\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"141\"\u003eDiode\u003c\/td\u003e\n\u003ctd colspan=\"3\" width=\"518\"\u003e0V~2.0V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Hantek Electronic Co Ltd","offers":[{"title":"Default Title","offer_id":37768377270461,"sku":"HANTEK-365D","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/hantek-electronic-co-ltd-data-logger-hantek-365d-bluetooth-usb-data-logger-36520730034399.jpg?v=1685179556"},{"product_id":"hantek-365e-data-logger-uk","title":"Hantek-365E Bluetooth\/USB Data Logger - iOS","description":"\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style=\"width:495pt;\" width=\"659\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"141\"\u003eFunction \u003c\/td\u003e\n\u003ctd width=\"168\"\u003eRange\u003c\/td\u003e\n\u003ctd width=\"185\"\u003eAccuracy\u003c\/td\u003e\n\u003ctd width=\"165\"\u003eResolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"120\" rowspan=\"6\" width=\"141\"\u003eDC Voltage\u003c\/td\u003e\n\u003ctd width=\"168\"\u003e60.00mV\u003c\/td\u003e\n\u003ctd rowspan=\"6\" width=\"185\"\u003e±1% ±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10uV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.00mV\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100uV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.00V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e60.00V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e60.00V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e800V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"100\" rowspan=\"5\" width=\"141\"\u003eAC Voltage\u003c\/td\u003e\n\u003ctd width=\"168\"\u003e60.00mV\u003c\/td\u003e\n\u003ctd rowspan=\"5\" width=\"185\"\u003e±1%±3 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10uV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.00mV\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100uV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.00V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e60.00V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.0V\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"80\" rowspan=\"4\" width=\"141\"\u003eDC Current\u003c\/td\u003e\n\u003ctd width=\"168\"\u003e60.00mA\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1.5%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10uA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.00mA\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100uA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.000A\u003c\/td\u003e\n\u003ctd rowspan=\"2\" width=\"185\"\u003e±1.5%±3 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e10.00A\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"80\" rowspan=\"4\" width=\"141\"\u003eAC Current\u003c\/td\u003e\n\u003ctd width=\"168\"\u003e60.00mA\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1.5%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10uA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.00mA\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100uA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.000A\u003c\/td\u003e\n\u003ctd rowspan=\"2\" width=\"185\"\u003e±1.5%±3 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e10.00A\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"120\" rowspan=\"6\" width=\"141\"\u003eResistance \u003c\/td\u003e\n\u003ctd width=\"168\"\u003e600\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1%±3 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e0.1Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.000 K\u003c\/td\u003e\n\u003ctd rowspan=\"4\" width=\"185\"\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e60.00 K\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e600.0 K\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e6.000 M\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e60.00 M\u003c\/td\u003e\n\u003ctd width=\"185\"\u003e±1.5%±3 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"120\" rowspan=\"6\" width=\"141\"\u003eCapacitance\u003c\/td\u003e\n\u003ctd width=\"168\"\u003e40.00nF\u003c\/td\u003e\n\u003ctd rowspan=\"5\" width=\"185\"\u003e±1%±1 digit\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e400.00nF\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e4.000uF\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e1nF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e40.00uF\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e10pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"168\"\u003e400.0uF\u003c\/td\u003e\n\u003ctd width=\"165\"\u003e100pF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\" height=\"20\" width=\"518\"\u003eAttention: The smallest capacitance value that can be measured in 5nF\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"141\"\u003eDiode\u003c\/td\u003e\n\u003ctd colspan=\"3\" width=\"518\"\u003e0V~2.0V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Hantek Electronic Co Ltd","offers":[{"title":"Default Title","offer_id":37768377303229,"sku":"HANTEK-365E","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/hantek-electronic-co-ltd-data-logger-hantek-365e-bluetooth-usb-data-logger-ios-29038389297341.jpg?v=1685118584"},{"product_id":"total-phase-tp500110-promira-serial-platform-uk","title":"Total Phase PROMIRA Platform","description":"\u003cp\u003eBuilt on a completely new FPGA-based architecture, the Promira platform is the latest tool in Total Phase's established line of cost-effective and easy-to-use embedded solutions. Instantly add new features to your device, as they become available: program and receive data with new protocols, higher clock rates and real-time protocol analysis.\u003c\/p\u003e\n\u003cp\u003eEach Promira platform includes a full software suite including powerful GUIs and APIs for a variety of applications.\u003c\/p\u003e\n\u003cp\u003eEvery Promira platform comes standard with integrated level-shifting, as well as Ethernet and USB control interfaces. The Promira platform is ready to accomplish any task you set it to.\u003c\/p\u003e\n\n\u003cp\u003eHere are some typical applications of the PROMIRA:\u003c\/p\u003e\n\u003ch3\u003eDevelopment Prototyping\u003c\/h3\u003e\n\u003cp\u003eThe Promira can be configured as a bus master or slave. As a master, it can be used to connect to sensors, memory devices and other peripherals. As a slave, it can be used to emulate a serial device and respond to test commands sent by a master CPU.\u003c\/p\u003e\n\u003ch3\u003eDevice Programming\u003c\/h3\u003e\n\u003cp\u003eThe unit can be used to program EEPROM and Flash devices on a target board in the laboratory.\u003c\/p\u003e\n\u003cp\u003eThe Promira is also ideal for production programming. Using its inbuilt Ethernet interface, the unit can be controlled away from the production floor using its API. This gives greater flexibility than the usual USB interface.\u003c\/p\u003e\n\u003ch3\u003eProduction Testing\u003c\/h3\u003e\n\u003cp\u003eIn addition to being able to program a blank memory device in production, the Promira can also be used to perform regression tests on the programmed device, ensuring the quality of your manufactured device.\u003c\/p\u003e\n\u003ch3\u003eHow Do I Buy a Promira?\u003c\/h3\u003e\n\u003cp\u003eThe Promira serial platform can be configured to run a range of Applications. You simply choose which application, or applications you need when ordering. At least one application must be chosen. Other applications can be purchased when you need them. This makes the Prpmira a great investment as you only pay for applications that you need, saving you money! .\u003c\/p\u003e\n\u003cp\u003eCurrently, the following applications are available, with more being developed all the time: .\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eI2C Active - Level 1 Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eAn essential I2C interface with programming speeds are twice as fast as the Aardvark I2C\/SPI Host Adapter. Featuring support for the I2C fast mode plus specification, the Promira platform equipped with the I2C Active - Level 1 Application provides high speed I2C programming, high performance debugging, and superior emulation for your I2C protocol needs.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eI2C Active - Level 2 Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eFeatures I2C programming speeds up to 3.4 MHz for Master and Slave. Featuring support for the I2C High Speed Mode specification, the Promira platform equipped with the I2C Active - Level 2 Application provides high speed I2C programming, high performance debugging, and superior emulation for your I2C protocol needs.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSPI Active - Level 1 Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eSPI programming speeds are over eight times faster than the Aardvark I2C\/SPI Host Adapter. Supporting clock speeds of up to 12.5 MHz for master and 8 MHz for slave functionality, the PROMIRA platform equipped with the SPI Active - Level 1 Application provides fast programming, ultra-high performance debugging and superior emulation for your SPI protocol needs.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSPI Active - Level 2 Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eSPI programming speeds are even faster than the Level 1 application - supporting clock speeds of up to 40 MHz for master and 20 MHz for slave functionality, the Promira platform equipped with the SPI Active - Level 2 Application provides fast programming, ultra-high performance debugging and superior emulation for your SPI protocol needs.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSPI Active - Level 3 Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eSPI programming speeds are even faster - supporting clock speeds of up to 80 MHz for master and 20 MHz for slave functionality, the Promira platform equipped with the SPI Active - Level 3 Application provides fast programming, ultra-high performance debugging and superior emulation for your SPI protocol needs. The eSPI®Active Example files also show you how to use your SPI Active licensed Promira Serial Platform to act as a master for the eSPI®protocol.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eeSPI®Analysis Application\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eMonitor the communication between a master and slave on accross the data lines, 5 channels (peripheral, virtual wire, OOB, Flash, Independent), 2 alert lines, 2 reset lines and more. The eSPI®Active Example files also show you how to use your SPI Active licensed Promira Serial Platform to act as a master for the eSPI®protocol.\u003c\/p\u003e\n\u003ch3\u003eIntegrated Capabilities\u003c\/h3\u003e\n\u003cp\u003eGigabit Ethernet and High-Speed USB connectivity to analysis PC included\" Signaling voltage from 0.9 V- 3.3 V, 5V fault tolerant\" Power your project with up to 200 mA supplemental power - 100 mA at 5 V, 100 mA available from 0.9 V- 3.3 V.\u003c\/p\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":55551942492535,"sku":"TP500110","price":1040.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/total-phase-inc-total-phase-promira-serial-platform-tp500110-72356892967287.png?v=1732757880"},{"product_id":"espi-analysis-application-total-phase-uk","title":"Total Phase PROMIRA eSPI Analysis Application","description":"\u003cp\u003eThe Promira eSPI Analysis Application (TP601010) turns a Total Phase Promira Serial Platform into an eSPI protocol analyser that monitors Enhanced Serial Peripheral Interface traffic at 20, 25, 33, 50 and 66 MHz in single, dual and quad I\/O. It follows the peripheral, virtual wire, out-of-band and flash channels, with two slave selects, two alert lines and two reset lines, and adds match triggers, hardware filters and statistics. It is for firmware, BIOS and BMC teams validating eSPI links between a chipset and its EC, BMC or Super I\/O.\u003c\/p\u003e\n\n\u003ch2\u003eeSPI Capture to 66 MHz in Single, Dual and Quad I\/O\u003c\/h2\u003e\n\u003cp\u003eeSPI replaced the LPC bus on Intel platforms, and its traffic needs a dedicated eSPI protocol analyser rather than an SPI one. This application captures every supported eSPI clock rate up to 66 MHz across single, dual and quad I\/O, so you see the link at the configuration the platform actually negotiates.\u003c\/p\u003e\n\n\u003ch2\u003ePeripheral, Virtual Wire, OOB and Flash Channels\u003c\/h2\u003e\n\u003cp\u003eThe analyser decodes the eSPI channels that carry a platform conversation: peripheral cycles, virtual wires that replace legacy side-band signals, out-of-band messages to a BMC, and flash access. Monitoring two slave selects, two alert lines and two reset lines alongside the data shows the whole exchange during boot, sleep transitions and resets, not one channel in isolation.\u003c\/p\u003e\n\n\u003ch2\u003eTriggers, Hardware Filters and Statistics\u003c\/h2\u003e\n\u003cp\u003eMatch triggers start a capture on the transaction that matters, and hardware filters discard traffic you do not need before it reaches the PC. Hardware statistics counters summarise the traffic, which helps make sense of a heavy boot sequence. Captures are viewed in Total Phase Data Center, which supports the Promira eSPI analyser from version 6.62. The analyser decodes the initialisation handshake and channel negotiation, and reports both correct and incorrect CRC values for command and response phases. For automated capture, the free Promira Software API eSPI Analysis drives the analyser from C, C#, Python, .NET, VB.NET or VB6.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eeSPI bus monitor (Analysis), non-intrusive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClock rates\u003c\/th\u003e\n\u003ctd\u003e20, 25, 33, 50 and 66 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI\/O modes\u003c\/th\u003e\n\u003ctd\u003eSingle, dual and quad I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChannels\u003c\/th\u003e\n\u003ctd\u003ePeripheral, virtual wire, OOB, flash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMonitored control lines\u003c\/th\u003e\n\u003ctd\u003e2 slave selects, 2 alert lines, 2 reset lines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapture tools\u003c\/th\u003e\n\u003ctd\u003eMatch triggers, hardware filters, statistics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal level\u003c\/th\u003e\n\u003ctd\u003e1.8 V I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003ctd\u003e2x17 IDC with 34-pin ribbon cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eData Center 6.62 or later; Promira Software API eSPI Analysis (C, C#, Python, .NET, VB.NET, VB6), free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost platform\u003c\/th\u003e\n\u003ctd\u003ePromira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eTP601010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a software licence only. It runs on the \u003ca href=\"\/en-de\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform\u003c\/a\u003e (\u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk\"\u003e£1,040\u003c\/span\u003e ex VAT), which is sold separately and must be in place before the licence can be installed.\u003c\/li\u003e\n\u003cli\u003eeSPI I\/O runs at 1.8 V, which is the eSPI norm. If your target runs eSPI at 3.3 V, \u003ca href=\"\/en-de\/pages\/contact-us\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMonitor only. It does not act as an eSPI master or slave.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLicence or Kit?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eeSPI Analysis Application\u003c\/th\u003e\n\u003cth\u003ePromira eSPI Bus Analyser Kit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrder code\u003c\/th\u003e\n\u003ctd\u003eTP601010\u003c\/td\u003e\n\u003ctd\u003eTP601100 (Debug Store kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003eLicence for an existing Promira\u003c\/td\u003e\n\u003ctd\u003ePromira Serial Platform with the eSPI Analysis application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"espi-analysis-application-total-phase-uk\"\u003e£1,215\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"total-phase-promira-espi-bus-analyser-kit\"\u003e£2,130\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf you do not yet own a Promira, the \u003ca href=\"\/en-de\/products\/total-phase-promira-espi-bus-analyser-kit\"\u003ePromira eSPI Bus Analyser Kit\u003c\/a\u003e supplies the platform and this application together for \u003cspan data-ds-price=\"total-phase-promira-espi-bus-analyser-kit\"\u003e£2,130\u003c\/span\u003e ex VAT; bought separately, the two total \u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk+espi-analysis-application-total-phase-uk\"\u003e£2,255\u003c\/span\u003e ex VAT. Choose this licence on its own to add eSPI to a Promira you already use for I2C or SPI.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eTracing virtual wire and OOB traffic between a PCH and an embedded controller during S3 and S5 transitions. Debugging BMC firmware that misses an eSPI alert during boot. Verifying flash channel accesses on a platform where the EC shares the BIOS flash.\u003c\/p\u003e\n\u003cp\u003eeSPI Analysis suits BIOS and EC firmware engineers, platform validation teams and BMC developers working on Intel eSPI designs.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Promira eSPI Analysis Application from \u003cspan data-ds-price=\"espi-analysis-application-total-phase-uk\"\u003e£1,215\u003c\/span\u003e ex VAT. For a formal quotation, \u003ca href=\"\/en-de\/pages\/contact-us\"\u003erequest a quote from our team\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes this include the Promira hardware?\u003c\/h3\u003e\n\u003cp\u003eNo. It is an application licence for a Promira Serial Platform you already own or order with it. The \u003ca href=\"\/en-de\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform\u003c\/a\u003e is \u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk\"\u003e£1,040\u003c\/span\u003e ex VAT.\u003c\/p\u003e\n\u003ch3\u003eWhat eSPI clock rates does it capture?\u003c\/h3\u003e\n\u003cp\u003e20, 25, 33, 50 and 66 MHz, in single, dual and quad I\/O.\u003c\/p\u003e\n\u003ch3\u003eCan it monitor a 3.3 V eSPI bus?\u003c\/h3\u003e\n\u003cp\u003eThe analyser is specified for 1.8 V eSPI I\/O. Contact us with your target details before ordering for a 3.3 V bus.\u003c\/p\u003e\n\u003ch3\u003eWhich software do I need?\u003c\/h3\u003e\n\u003cp\u003eTotal Phase Data Center, version 6.62 or later, which is free.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 5 October 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 Total Phase pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/espi-analysis\/\"\u003eeSPI Analysis Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/support\/articles\/213706108-promira-serial-platform-espi-analyzer-user-manual\/\"\u003ePromira eSPI Analyzer User Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/data-center\/\"\u003eData Center\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/protocols\/espi\/\"\u003eeSPI protocol tools\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-software-api-espi\/\"\u003ePromira Software API eSPI Analysis\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-serial\/\"\u003ePromira Serial Platform\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768388542653,"sku":"TP601010","price":1215.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-software-espi-analysis-application-28942809170109.jpg?v=1685155425"},{"product_id":"zeroplus-lap-f-logic-analyser-professional-40-64-channel-lap-f164256m","title":"ZeroPlus LAP-F High-Performance PC-Based Logic Analyser 40\/64 Channel","description":"\u003cp\u003eExtremely compact and lightweight, the ZeroPlus ZeroPlus-LAP-F logic analyser connects to and is powered by the USB port of any desktop or ZeroPlus-Laptop PC making it very portable and ideal for use in the field. \u003c\/p\u003e\n\n\u003cp\u003eThe ZeroPlus-LAP-F) provides internal sampling rates up to 1GHz and up to 512M samples memory depth per channel.\u003c\/p\u003e\n\n\u003ch3\u003eTrigger\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e6 protocol triggers (hardware)(serial): I2C, I2S, SPI, SVID, UART(RS-232C\/422\/485), CAN 2.0B\u003c\/li\u003e\n    \u003cli\u003eTrigger types: Pattern \/ Edge \/ Pulse-Width \/ Interval\u003c\/li\u003e\n    \u003cli\u003eTrigger channels: 40\u003c\/li\u003e\n    \u003cli\u003eTrigger delay: Yes\u003c\/li\u003e\n    \u003cli\u003eTrigger levels: 256\u003c\/li\u003e\n    \u003cli\u003eTrigger pass: 1-65535\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eSpecial Software Features\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eZooming and panning\u003c\/li\u003e\n    \u003cli\u003eWaveform and UI Customization\u003c\/li\u003e\n    \u003cli\u003eState list and Waveform view\u003c\/li\u003e\n    \u003cli\u003ePacket list\u003c\/li\u003e\n    \u003cli\u003eWaveform Navigator\u003c\/li\u003e\n    \u003cli\u003eMemory view\u003c\/li\u003e\n    \u003cli\u003eStatistic\u003c\/li\u003e\n    \u003cli\u003eFile Comparison\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eCertifications\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eFCC \/ CE\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eActive Probes\/Signals\u003c\/h3\u003e\n\n\u003ctable border=\"0\" width=\"100%\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eP120LV\n            \u003cul\u003e\n                \u003cli\u003eDUT Bandwidth (Max.)：120 MHz\u003c\/li\u003e\n                \u003cli\u003eChannels (Max.)：Data 64 ch\u003c\/li\u003e\n                \u003cli\u003eSignal Type：Single-Ended Bus\u003c\/li\u003e\n                \u003cli\u003eInput Impedance \/ Capacitance：190 Kohm ± 10% \/ 4.3 pF ±2 pF\u003c\/li\u003e\n                \u003cli\u003eBus Voltage： VIH：0.6V-5V\u003c\/li\u003e\n                \u003cli\u003eInput DC Voltage (Max.): ± 10V\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cbr\u003e\n            \u003cbr\u003e\n            P200EM (4 ch + 1 ch (CLK))\n            \u003cul\u003e\n                \u003cli\u003eDUT Bandwidth (Max.)：200 MHz\u003c\/li\u003e\n                \u003cli\u003eChannels (Max.)：Data 32 ch\u003c\/li\u003e\n                \u003cli\u003eSignal Type：Single-Ended Bus\u003c\/li\u003e\n                \u003cli\u003eInput Impedance \/ Capacitance：190 Kohm ± 10% \/ 4.3 pF ±2 pF\u003c\/li\u003e\n                \u003cli\u003eBus Voltage： VIH：0.6V-5V\u003c\/li\u003e\n                \u003cli\u003eInput DC Voltage (Max.): ± 10V\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eProtocol Analysis Feature\u003c\/h3\u003e\n\n\u003cp\u003eOver 130 different protocols can be analysed by the LAP-C logic analyser: .\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1-Wire (Adv) Interface\u003c\/li\u003e\n    \u003cli\u003e1-Wire Interface\u003c\/li\u003e\n    \u003cli\u003e3-Wire Interface\u003c\/li\u003e\n    \u003cli\u003e7-segment LED Interface\u003c\/li\u003e\n    \u003cli\u003eAC97 Interface\u003c\/li\u003e\n    \u003cli\u003eAES\/EBU Interface\u003c\/li\u003e\n    \u003cli\u003eAMD SVI2 Interface\u003c\/li\u003e\n    \u003cli\u003eArithmetic Logic\u003c\/li\u003e\n    \u003cli\u003eBDM Interface\u003c\/li\u003e\n    \u003cli\u003eBMS Interface\u003c\/li\u003e\n    \u003cli\u003eCAN 2.0B Bus\u003c\/li\u003e\n    \u003cli\u003eCCIR656 Interface\u003c\/li\u003e\n    \u003cli\u003eCMOS Image Sensor Interface\u003c\/li\u003e\n    \u003cli\u003eCompact Flash 4.1 Interface\u003c\/li\u003e\n    \u003cli\u003eDALI Interface\u003c\/li\u003e\n    \u003cli\u003eDifferential Manchester Interface\u003c\/li\u003e\n    \u003cli\u003eDigital Logic\u003c\/li\u003e\n    \u003cli\u003eDigRF Interface\u003c\/li\u003e\n    \u003cli\u003eDMX512 Interface\u003c\/li\u003e\n    \u003cli\u003eDP Aux Channel 1.1 Interface\u003c\/li\u003e\n    \u003cli\u003eDSA Interface\u003c\/li\u003e\n    \u003cli\u003eDSI Bus\u003c\/li\u003e\n    \u003cli\u003eFlexRay 2.1A Bus\u003c\/li\u003e\n    \u003cli\u003eFWH Interface\u003c\/li\u003e\n    \u003cli\u003eGPIB\/IEEE488 Interface\u003c\/li\u003e\n    \u003cli\u003eHART Interface\u003c\/li\u003e\n    \u003cli\u003eHD Audio Interface\u003c\/li\u003e\n    \u003cli\u003eHDMI CEC Interface\u003c\/li\u003e\n    \u003cli\u003eHDQ Interface\u003c\/li\u003e\n    \u003cli\u003eHPI Interface\u003c\/li\u003e\n    \u003cli\u003eI2C EEPROM 24L Memory Interface\u003c\/li\u003e\n    \u003cli\u003eI2C EEPROM 24LCS Memory Interface\u003c\/li\u003e\n    \u003cli\u003eI2C Interface\u003c\/li\u003e\n    \u003cli\u003eI2S Interface\u003c\/li\u003e\n    \u003cli\u003eISO7816 UART Interface\u003c\/li\u003e\n    \u003cli\u003eJ-K Flip-flop\u003c\/li\u003e\n    \u003cli\u003eJTAG 2.0 Interface\u003c\/li\u003e\n    \u003cli\u003eKeeLoq Code Hopping Interface\u003c\/li\u003e\n    \u003cli\u003eKNX Interface\u003c\/li\u003e\n    \u003cli\u003eLCD12864 Display Interface\u003c\/li\u003e\n    \u003cli\u003eLCD1602 Display Interface\u003c\/li\u003e\n    \u003cli\u003eLED Pitch Array Interface\u003c\/li\u003e\n    \u003cli\u003eLG4572 Interface\u003c\/li\u003e\n    \u003cli\u003eLIN Bus 2.1\u003c\/li\u003e\n    \u003cli\u003eLine Code\u003c\/li\u003e\n    \u003cli\u003eLPC Bus\u003c\/li\u003e\n    \u003cli\u003eLPC-SERIRQ Interface\u003c\/li\u003e\n    \u003cli\u003eLPT Interface\u003c\/li\u003e\n    \u003cli\u003eManchester Encoding\u003c\/li\u003e\n    \u003cli\u003eMaxim DS1302 Interface\u003c\/li\u003e\n    \u003cli\u003eMaxim DS18B20 Interface\u003c\/li\u003e\n    \u003cli\u003eMCU-51 Disassembly\u003c\/li\u003e\n    \u003cli\u003eMDDI Interface\u003c\/li\u003e\n    \u003cli\u003eMHL-CBus\u003c\/li\u003e\n    \u003cli\u003eMicrowire Bus\u003c\/li\u003e\n    \u003cli\u003eMicrowire EEPROM 93C\u003c\/li\u003e\n    \u003cli\u003eMIDI Interface\u003c\/li\u003e\n    \u003cli\u003eMII Interface\u003c\/li\u003e\n    \u003cli\u003eMiller Interface\u003c\/li\u003e\n    \u003cli\u003eMIPI CSI-2 Interface\u003c\/li\u003e\n    \u003cli\u003eMIPI DSI Interface\u003c\/li\u003e\n    \u003cli\u003eModBus\u003c\/li\u003e\n    \u003cli\u003eModified Miller Interface\u003c\/li\u003e\n    \u003cli\u003eModified SPI Interface\u003c\/li\u003e\n    \u003cli\u003eMVB\u003c\/li\u003e\n    \u003cli\u003eNEC PD6122 Interface\u003c\/li\u003e\n    \u003cli\u003eOpentherm 2.2 Interface\u003c\/li\u003e\n    \u003cli\u003ePCI Bus\u003c\/li\u003e\n    \u003cli\u003ePCM Interface\u003c\/li\u003e\n    \u003cli\u003ePECI Interface\u003c\/li\u003e\n    \u003cli\u003ePhilips RC5 Interface\u003c\/li\u003e\n    \u003cli\u003ePhilips RC6 Interface\u003c\/li\u003e\n    \u003cli\u003eProfiBus\u003c\/li\u003e\n    \u003cli\u003ePS\/2 Interface\u003c\/li\u003e\n    \u003cli\u003ePSB Interface\u003c\/li\u003e\n    \u003cli\u003ePT2262\/PT2272 Interface\u003c\/li\u003e\n    \u003cli\u003eQuad SPI Interface\u003c\/li\u003e\n    \u003cli\u003eRGB Interface\u003c\/li\u003e\n    \u003cli\u003eS\/PDIF Interface\u003c\/li\u003e\n    \u003cli\u003eS2Cwire\/AS2Cwire Interface\u003c\/li\u003e\n    \u003cli\u003eSamsung K9 NAND Flash Interface\u003c\/li\u003e\n    \u003cli\u003eSCCB Interface\u003c\/li\u003e\n    \u003cli\u003eSD2.0\/SDIO Interface\u003c\/li\u003e\n    \u003cli\u003eSDQ Interface\u003c\/li\u003e\n    \u003cli\u003eSerial GPIO IBPI Interface\u003c\/li\u003e\n    \u003cli\u003eSHT11 Interface\u003c\/li\u003e\n    \u003cli\u003eSignia 6210 Interface\u003c\/li\u003e\n    \u003cli\u003eSingle Wire Debug (SWD) Interface\u003c\/li\u003e\n    \u003cli\u003eSITI DM114\/DM115 Interface\u003c\/li\u003e\n    \u003cli\u003eSLE4442 Interface\u003c\/li\u003e\n    \u003cli\u003eSMBus 2.0\u003c\/li\u003e\n    \u003cli\u003eSPI (Atmel 25F EEPROM)\u003c\/li\u003e\n    \u003cli\u003eSPI Interface\u003c\/li\u003e\n    \u003cli\u003eSPI Plus Interface\u003c\/li\u003e\n    \u003cli\u003eSSI Interface\u003c\/li\u003e\n    \u003cli\u003eST7669 Interface\u003c\/li\u003e\n    \u003cli\u003eSTBus\u003c\/li\u003e\n    \u003cli\u003eSVID Interface\u003c\/li\u003e\n    \u003cli\u003eUART (RS-232C\/RS-422\/RS-485) Interface\u003c\/li\u003e\n    \u003cli\u003eUNI\/O Interface\u003c\/li\u003e\n    \u003cli\u003eUp\/Down Counter\u003c\/li\u003e\n    \u003cli\u003eUSB v1.1 Interface\u003c\/li\u003e\n    \u003cli\u003eUSB v2.0 Interface\u003c\/li\u003e\n    \u003cli\u003eWIEGAND Interface\u003c\/li\u003e\n    \u003cli\u003eWTB Bus\u003c\/li\u003e\n    \u003cli\u003eWWV-WWVH-WWVB Interface\u003c\/li\u003e\n    \u003cli\u003eYK-5 Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eTest Probes\u003c\/h3\u003e\n\n\u003cp\u003eNinety two Test probes are included with the basic analyser. \u003ca href=\"https:\/\/www.thedebugstore.com\/products\/lap-probe-20-test-grabbers.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eAdditional hooks\u003c\/a\u003e are available as spares when needed.\u003c\/p\u003e","brand":"ZeroPlus Technology Co Ltd","offers":[{"title":"40 \/ 64M","offer_id":42025004073183,"sku":"LAP-F(14064M)","price":1350.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/zeroplus-technology-co-ltd-logic-analyser-lap-f-140512m-40-ch-logic-protocol-analyser-30245638176957.jpg?v=1685223289"},{"product_id":"mikroe-2886-temp-log-click-board-uk","title":"Temp-Log Click Board™","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eTemp-Log Click Board™ \u003c\/strong\u003e\u003c\/em\u003eis a precise ambient temperature measurement device, equipped with 8Kbit (1024 bytes) of EEPROM memory, which can be used to permanently store system configuration or log application specific or user preference data. This click covers a range of temperatures from -55°C to +125°C with the highest accuracy of ±0.5°C, in the range of 0°C to 85°C. The device can also send an ALERT signal to the INT pin of the mikroBUS™ every time programmed temperature thresholds are reached.\u003c\/p\u003e\n\n\u003cp\u003eBesides the EEPROM, the device also contains non-volatile configuration register, which is copied to the main configuration register after every restart of the device. This allows for near-autonomous operation of the device, without the need to initialize the sensor configuration parameters after every power cycle. These features make the Temp-Log click a perfect choice for temperature measurement in a wide variety of communication, consumer, computer, industrial and similar applications, with an addition of up to 8Kbit of user data storage space.\u003c\/p\u003e\n\n\u003ch3\u003eHow Does The Temp-Log Click Board™ Work?\u003c\/h3\u003e\n\n\u003cp\u003eThe main active component used on this click is the AT30TSE758A, a 9 to 12bit, ±0.5°C accurate digital temperature sensor with non-volatile registers and integrated serial EEPROM, from Microchip. The AT30TSE758A utilizes a band-gap type temperature sensor with an internal sigma-delta ADC to measure and convert the temperature. The internal ADC can be configured to work with the resolution of 9, 10, 11 or 12 bits. This directly affects the size of the temperature measurement steps. However, it should be noted that the higher resolution results in longer conversion times. The measured temperature is calibrated in degrees Celsius.\u003c\/p\u003e\n\n\u003cp\u003eThe AT30TSE758A sensor uses the I2C bus for the communication with the MCU. This sensor has 7 data registers, which are used to access all of the functions of this device. After initializing the I2C communication with the START condition from the master, a valid device address is expected. This thermal sensor uses 1001AAA as the 7bit I2C address, where \"AAA\" corresponds to the hard-wired A2 to A0 address pins. Those pins can be set to a HIGH or a LOW logic state by switching the onboard SMD jumpers, labelled as A0, A1, and A2. After the correct address has been received by the sensor, it will respond with the ACK and it is ready to accept the address of one of the seven available 16bit registers.\u003cbr\u003e\n\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/www.mikroe.com\/img\/cms\/temp-log-click-inside-image-a.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe 16bit temperature register holds the converted thermal data in MSB\/LSB format and is available for reading at every moment; the thermal conversion is performed in the background, and if there is no active READ task over the thermal register, the newly converted temperature data is placed in this register. If there is an active READ task being performed, the converted thermal data will be withheld, until the reading process is completed.\u003c\/p\u003e\n\n\u003cp\u003eThe AT30TSE758A sensor is made with the power saving in mind. When the shutdown mode is engaged, the power consumption is minimal and most of the device sections are not consuming any power. The ONE SHOT function allows to wake up the device, take one measurement, update the registers and go into shutdown mode again. This is accomplished by the OS bit in the config register. Setting this bit as 1 while the device is in the shutdown mode will perform one reading cycle as described above. This allows for a minimum power consumption.\u003c\/p\u003e\n\n\u003cp\u003eThe 16bit configuration register is used to configure all the working parameters of the sensor: mode (one-shot mode, normal and shutdown mode), conversion resolution, the polarity of the ALERT pin, ALERT mode, non-volatile memory busy status and so on. There is also a copy of this register in the non-volatile memory, which can be independently changed. After the power on, the content of the non-volatile config register will be copied to its volatile counterpart. The non-volatile version of the configuration register contains additional bits for the permanent lock-down and config lock, used to prevent further changes of the configuration parameters.\u003c\/p\u003e\n\n\u003cp\u003eAlso, there are two more 16bit registers used to set the high and the low temperature threshold, which also have their non-volatile copies. Depending on the ALERT mode bit in the config register, the temperature threshold values in these registers will be used to trigger an event on the ALERT pin, routed to the mikroBUS™ INT pin. This pin is pulled HIGH on this click so it is a good idea to configure it as active LOW, by using the polarity bit in the config register.\u003c\/p\u003e\n\n\u003cp\u003eThe 8Kbit EEPROM section of the AT30TSE758A acts as an additional serial device, with its own I2C slave address. The 7bit I2C address of the serial EEPROM is 1010APP, where \"A\" corresponds to the status of the A2 address pin. The last two \"P\" characters correspond to the memory page bits P1 and P0. The remaining two address pin states (A0 and A1) are not required to match when addressing the EEPROM. These bits, along with the word address byte transmitted via the I2C, now comprise the 10bit address field required to map all of the 1024 bytes available on this device. The EEPROM itself contains 16 bytes per page and has 64 pages in an array.\u003c\/p\u003e\n\n\u003cp\u003eMikroElektronika provides libraries and functions which simplify working with this device. For more detailed information on the functionality of this device, it is always a good idea to consult the AT30TSE758A datasheet.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTemp-Log Click Board™\u003c\/strong\u003e is capable of working with both 3.3V and 5V systems. The desired operational voltage can be selected by the VCC SEL SMD jumper. SCL and SDA lines are both pulled HIGH by the onboard resistors, so the Temp-Log click is ready to be used right out of the box.\u003c\/p\u003e\n\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eTemperature \u0026amp; humidity,Temperature Logging\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eThe \u003cstrong\u003eTemp-Log Click Board™\u003c\/strong\u003e can be used for the temperature measurement in a wide variety of communication, consumer, computer, industrial and similar applications, where accurate ambient thermal measurement with a simple data logging is required.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003eAT30TSE758A, a 9 to 12bit, ±0.5°C accurate digital temperature sensor with non-volatile registers and integrated serial EEPROM, from Microchip.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eAn accurate 12bit thermal sensor with non-volatile registers and 8Kbit of EEPROM for storing user data. Optimized for low power performance and intelligent data management.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eI2C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003emikroBUS\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eClick board size\u003c\/td\u003e\n            \u003ctd\u003eM (42.9 x 25.4 mm)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e3.3V or 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePINOUT DIAGRAM\u003c\/h3\u003e\n\n\u003cp\u003eThis table shows how the pinout on \u003cstrong\u003eTemp-Log\u003c\/strong\u003e\u003cb\u003e click\u003c\/b\u003e corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).\u003c\/p\u003e\n\n\u003ctable width=\"549\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth colspan=\"4\"\u003e\u003cimg alt=\"Mikrobus logo.png\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/mikrobus\/mikroBUS-logo-black.png\"\u003e\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003eAN\u003c\/td\u003e\n            \u003ctd\u003ePWM\u003c\/td\u003e\n            \u003ctd\u003e16\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n            \u003ctd\u003eRST\u003c\/td\u003e\n            \u003ctd\u003eINT\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eALT\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eAlert\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n            \u003ctd\u003eCS\u003c\/td\u003e\n            \u003ctd\u003eRX\u003c\/td\u003e\n            \u003ctd\u003e14\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003eSCK\u003c\/td\u003e\n            \u003ctd\u003eTX\u003c\/td\u003e\n            \u003ctd\u003e13\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n            \u003ctd\u003eMISO\u003c\/td\u003e\n            \u003ctd\u003eSCL\u003c\/td\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSCL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Clock\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003eMOSI\u003c\/td\u003e\n            \u003ctd\u003eSDA\u003c\/td\u003e\n            \u003ctd\u003e11\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSDA\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Data\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePower Supply\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e+3V3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e7\u003c\/td\u003e\n            \u003ctd\u003e3.3V\u003c\/td\u003e\n            \u003ctd\u003e5V\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e+5V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003ePower Supply\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003e9\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTEMP-LOG CLICK MAXIMUM RATINGS\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eDescription\u003c\/th\u003e\n            \u003cth\u003eMin\u003c\/th\u003e\n            \u003cth\u003eTyp\u003c\/th\u003e\n            \u003cth\u003eMax\u003c\/th\u003e\n            \u003cth\u003eUnit\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature measurement range\u003c\/td\u003e\n            \u003ctd\u003e-55\u003c\/td\u003e\n            \u003ctd\u003e+125\u003c\/td\u003e\n            \u003ctd\u003e°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature measurement accuracy\u003c\/td\u003e\n            \u003ctd\u003e±0.5\u003c\/td\u003e\n            \u003ctd\u003e±3\u003c\/td\u003e\n            \u003ctd\u003e°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature measurement conversion resolution\u003c\/td\u003e\n            \u003ctd\u003e9\u003c\/td\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003ebits\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eI2C clock speed\u003c\/td\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003e4000\u003c\/td\u003e\n            \u003ctd\u003ekHz\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eONBOARD SETTINGS AND INDICATORS\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eLabel\u003c\/th\u003e\n            \u003cth\u003eName\u003c\/th\u003e\n            \u003cth\u003eDefault\u003c\/th\u003e\n            \u003cth\u003eDescription\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLD1\u003c\/td\u003e\n            \u003ctd\u003ePWR\u003c\/td\u003e\n            \u003ctd\u003ePower LED indicator\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP1\u003c\/td\u003e\n            \u003ctd\u003eA0\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003eI2C address bit 0 selection: left position '0', right position '1'\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP2\u003c\/td\u003e\n            \u003ctd\u003eA1\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003eI2C address bit 1 selection: left position '0', right position '1'\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP3\u003c\/td\u003e\n            \u003ctd\u003eA2\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003eI2C address bit 2 selection: left position '0', right position '1'\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP4\u003c\/td\u003e\n            \u003ctd\u003eVCC SEL\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003ePower supply voltage selection, left position 3V3, right position 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e \u003c\/h3\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768413905085,"sku":"MIKROE-2886","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-temp-log-click-board-30217669509309.jpg?v=1685218983"},{"product_id":"total-phase-promira-espi-bus-analyser-kit","title":"Total Phase PROMIRA eSPI Bus Analyser Kit","description":"\u003cp\u003eThe Promira eSPI Bus Analyser Kit (TP601100) is a complete eSPI protocol analyser: a Total Phase Promira Serial Platform supplied with the eSPI Analysis Application, ready to monitor Enhanced Serial Peripheral Interface traffic at 20, 25, 33, 50 and 66 MHz in single, dual and quad I\/O. It follows the peripheral, virtual wire, out-of-band and flash channels with two slave selects, two alert lines and two reset lines, and adds match triggers, hardware filters and statistics. It is the starting point for BIOS, embedded controller and BMC teams who need to see the eSPI link between a chipset and its EC, BMC or Super I\/O.\u003c\/p\u003e\n\n\u003ch2\u003eOne Order for Platform and eSPI Licence\u003c\/h2\u003e\n\u003cp\u003eThe kit combines the \u003ca href=\"\/en-de\/products\/total-phase-tp500110-promira-serial-platform-uk\"\u003ePromira Serial Platform\u003c\/a\u003e with the \u003ca href=\"\/en-de\/products\/espi-analysis-application-total-phase-uk\"\u003eeSPI Analysis\u003c\/a\u003e licence, so the analyser arrives ready for eSPI capture rather than as two separate purchases. The Promira connects to the analysis PC over USB 2.0 or Gigabit Ethernet, which lets it sit beside a platform in a validation lab while Data Center runs on a desk PC.\u003c\/p\u003e\n\n\u003ch2\u003eeSPI Capture to 66 MHz With Triggers and Filters\u003c\/h2\u003e\n\u003cp\u003eeSPI replaced the LPC bus on Intel platforms, and its traffic needs a dedicated eSPI protocol analyser rather than an SPI one. The kit captures every supported eSPI clock rate up to 66 MHz across single, dual and quad I\/O, decodes the initialisation handshake and channel negotiation, and reports both correct and incorrect CRC values for command and response phases. Match triggers start a capture on the transaction that matters, hardware filters drop traffic you do not need, and hardware statistics counters summarise the traffic.\u003c\/p\u003e\n\n\u003ch2\u003eGrows With the Rest of the Promira Range\u003c\/h2\u003e\n\u003cp\u003eThe platform in the kit is the same Promira that runs the I2C and SPI applications. Add an SPI Active licence and Total Phase's eSPI Active example files let the same unit send eSPI commands to a target as a master; Total Phase recommends \u003ca href=\"\/en-de\/products\/tp600710-spi-active-level-3-application-total-phase-uk\"\u003eSPI Active Level 3\u003c\/a\u003e for full eSPI performance at 66 MHz quad I\/O. I2C and SPI analysis and host-adapter licences can be added to the same unit later.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eeSPI bus monitor (Analysis), non-intrusive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClock rates\u003c\/th\u003e\n\u003ctd\u003e20, 25, 33, 50 and 66 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI\/O modes\u003c\/th\u003e\n\u003ctd\u003eSingle, dual and quad I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChannels\u003c\/th\u003e\n\u003ctd\u003ePeripheral, virtual wire, OOB, flash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMonitored control lines\u003c\/th\u003e\n\u003ctd\u003e2 slave selects, 2 alert lines, 2 reset lines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapture tools\u003c\/th\u003e\n\u003ctd\u003eMatch triggers, hardware filters, statistics, CRC reporting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal level\u003c\/th\u003e\n\u003ctd\u003e1.8 V I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTarget connector\u003c\/th\u003e\n\u003ctd\u003e2x17 IDC with 34-pin ribbon cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost interfaces\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 and Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eData Center 6.62 or later; Promira Software API eSPI Analysis (C, C#, Python, .NET, VB.NET, VB6), free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating systems\u003c\/th\u003e\n\u003ctd\u003eWindows 10 and 11, Linux, macOS 13 or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrder code\u003c\/th\u003e\n\u003ctd\u003eTP601100 (Debug Store kit of TP500110 and TP601010)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eeSPI I\/O runs at 1.8 V, the eSPI norm. If your target runs eSPI at 3.3 V, \u003ca href=\"\/en-de\/pages\/contact-us\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eThe eSPI Analysis Application monitors only. Acting as an eSPI master needs an SPI Active licence as well.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKit or Licence?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003ePromira eSPI Bus Analyser Kit\u003c\/th\u003e\n\u003cth\u003eeSPI Analysis Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrder code\u003c\/th\u003e\n\u003ctd\u003eTP601100 (Debug Store kit)\u003c\/td\u003e\n\u003ctd\u003eTP601010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003ePromira Serial Platform with the eSPI Analysis application\u003c\/td\u003e\n\u003ctd\u003eLicence for an existing Promira\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"total-phase-promira-espi-bus-analyser-kit\"\u003e£2,130\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"espi-analysis-application-total-phase-uk\"\u003e£1,215\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eChoose the kit if you do not yet own a Promira; it is \u003cspan data-ds-price=\"total-phase-promira-espi-bus-analyser-kit\"\u003e£2,130\u003c\/span\u003e ex VAT, and the platform and licence bought separately total \u003cspan data-ds-price=\"total-phase-tp500110-promira-serial-platform-uk+espi-analysis-application-total-phase-uk\"\u003e£2,255\u003c\/span\u003e ex VAT. If you already use a Promira for I2C or SPI, add eSPI with the licence alone.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eTracing virtual wire and OOB traffic between a PCH and an embedded controller during S3 and S5 transitions. Debugging BMC firmware that misses an eSPI alert during boot. Verifying flash channel accesses on a platform where the EC shares the BIOS flash.\u003c\/p\u003e\n\u003cp\u003eThe kit suits BIOS and EC firmware engineers, platform validation teams and BMC developers bringing up Intel eSPI designs.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Promira eSPI Bus Analyser Kit from \u003cspan data-ds-price=\"total-phase-promira-espi-bus-analyser-kit\"\u003e£2,130\u003c\/span\u003e ex VAT. For a formal quotation, \u003ca href=\"\/en-de\/pages\/contact-us\"\u003erequest a quote from our team\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is in the kit?\u003c\/h3\u003e\n\u003cp\u003eA Promira Serial Platform with the eSPI Analysis Application licence. Data Center and the Promira Software API are free downloads from Total Phase.\u003c\/p\u003e\n\u003ch3\u003eWhat eSPI clock rates does it capture?\u003c\/h3\u003e\n\u003cp\u003e20, 25, 33, 50 and 66 MHz, in single, dual and quad I\/O.\u003c\/p\u003e\n\u003ch3\u003eCan it monitor a 3.3 V eSPI bus?\u003c\/h3\u003e\n\u003cp\u003eThe analyser is specified for 1.8 V eSPI I\/O. Contact us with your target details before ordering for a 3.3 V bus.\u003c\/p\u003e\n\u003ch3\u003eCan I use the same Promira for I2C and SPI?\u003c\/h3\u003e\n\u003cp\u003eYes. Add the I2C or SPI Active or Analysis applications to the same unit; a Promira can hold more than one application licence.\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 5 October 2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (6 Total Phase pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/espi-analysis\/\"\u003eeSPI Analysis Application\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/protocols\/espi\/\"\u003eeSPI protocol tools\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/support\/articles\/213706108-promira-serial-platform-espi-analyzer-user-manual\/\"\u003ePromira eSPI Analyzer User Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-software-api-espi\/\"\u003ePromira Software API eSPI Analysis\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/data-center\/\"\u003eData Center\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.totalphase.com\/products\/promira-serial\/\"\u003ePromira Serial Platform\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Total Phase, Inc","offers":[{"title":"Default Title","offer_id":37768414691517,"sku":"TP601100","price":2130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/total-phase-inc-analyser-espi-bus-analyser-kit-28942789869757.jpg?v=1685164783"},{"product_id":"temp-log-2-click-board-mikroe-3004-uk","title":"Temp-Log 2 Click Board™","description":"\u003cp\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"\/\/www.youtube.com\/embed\/96s-9NVUYkA\" style=\"width:500px;height:281px;\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe\u003cem\u003e\u003cstrong\u003e Temp-Log 2 Click Board™\u003c\/strong\u003e\u003c\/em\u003e is a precise ambient temperature measurement device, equipped with the additional non-volatile (EEPROM) memory that can be used to permanently store system configuration, and 64 bits of general-purpose EEPROM, used for logging application-specific or user preference data. This click covers a range of temperatures from -55°C to +125°C with the highest accuracy of ±0.2°C, in the range of -10°C to 85°C, exceeding the accuracy of CLASS A RTD. The device can also send an ALERT signal to the INT pin of the mikroBUS™ every time programmed temperature thresholds are exceeded.\u003cbr\u003e\n\u003cbr\u003e\nWhen the device is reset, the configuration values programmed to the EEPROM memory of the sensor IC are copied to the respective register map locations. This allows for near-autonomous operation of the device, without the need to initialize the sensor configuration parameters after every power cycle. These features make the Temp-Log click a perfect choice for temperature measurement in a wide variety of communication, consumer, computer, industrial and similar applications, with the addition of user data storage space.\u003c\/p\u003e\n\n\u003ch3\u003eHow Does The Temp-Log 2 Click Board™ Work?\u003c\/h3\u003e\n\n\u003cp\u003eThe main active component used on the  \u003cstrong\u003eTemp-Log 2 Click Board™\u003c\/strong\u003e is the TMP116, a high-accuracy, low-power, digital temperature sensor, from Texas Instruments. The TMP116 utilizes a diode type temperature sensor with an internal sigma-delta 16bit ADC for the temperature measurement and conversion. The device can work in several operating modes that affect the power consumption, as well as the measurement accuracy. Equipped with 16bit ADC, TMP116 provides a measurement step of 0.0078125°C.\u003c\/p\u003e\n\n\u003cp\u003eThe TMP116 sensor uses the I2C bus for communication with the MCU. This sensor has six config\/data registers, which are used to access all the functions of this device. It also has four additional registers for storing user-specific data in the non-volatile memory area (EEPROM). After initializing the I2C communication with the START condition from the master, a valid device address is expected. This thermal sensor uses the 100100A binary value as the 7bit I2C address, where \"A\" corresponds to the logical state of the ADDR0 pin. This pin can be set to a HIGH or LOW logic state by switching the position of the onboard SMD jumper, labelled as ADDR SEL.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/www.mikroe.com\/img\/cms\/temp-log-2-click-inside.jpg\" src=\"https:\/\/www.mikroe.com\/img\/cms\/temp-log-2-click-inside.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe TMP116 sensor is made with the power saving in mind. When the Shutdown mode is engaged, the power consumption is minimal and most of the device sections are not consuming any power. One Shot mode allows to wake up the device, take one measurement, update the registers, and revert to the Shutdown mode again. This allows for a minimum power consumption. To allow One Shot mode, the device needs to be put into the Shutdown mode first. The most power is consumed by the Continuous mode. This mode allows setting the integration and the standby time. Integration time actively burst-samples the thermal data, reducing the noise error by averaging the result. Allowing longer stand-by duration prevents too much power consumption, as well as the additional self-heating of the sensor IC which would affect the accuracy of the measurement.\u003c\/p\u003e\n\n\u003cp\u003eThe 16bit Configuration register is used to configure all the working parameters of the sensor: working mode (one-shot mode, continuous conversion mode, and shutdown mode), measurement conversion and integration parameters, the polarity of the ALERT pin, DATA_RDY status, non-volatile memory busy status, and so on. There is also a copy of this register in the non-volatile memory, which can be independently changed. After the power on, the content of the non-volatile Configuration register will be copied to its volatile counterpart allowing settings retention, even after power down.\u003c\/p\u003e\n\n\u003cp\u003eTo write data to the non-volatile memory locations, it is necessary to first unlock the EUN lock bit in the EEPROM Unlock register. After the EEPROM unlock, it is possible to write in the EEPROM locations. Four general purpose EEPROM register locations can be used for storing any type of data. Writing data to the configuration registers will mirror the data to the respective EEPROM locations. EEPROM Unlock register also contains the EEPROM_Busy bit, which indicates the readiness of the EEPROM. If this bit is 0, writing to EEPROM is possible. This bit mirrors the same bit in the Configuration register.\u003c\/p\u003e\n\n\u003cp\u003eThere are two more 16bit registers used to set the high and low-temperature threshold, which also have their non-volatile copies. Depending on the ALERT mode bit in the Configuration register, the temperature threshold values in these registers will be used to trigger an event on the ALERT pin, routed to the mikroBUS™ INT pin. This pin is pulled HIGH on this Click board™ by a resistor, so it is a good idea to configure it as active LOW, by using the polarity bit in the Configuration register.\u003c\/p\u003e\n\n\u003cp\u003eThe TMP116 device contains a register with the unique device ID, which is factory programmed to read only locations. Additionally, the general purpose EEPROM registers are pre-programmed with one more unique ID, which allows NIST traceability. The TMP116 units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO\/IEC 17025 accredited standards. If the NIST traceability is not required, general purpose EEPROM registers can be freely overwritten.\u003c\/p\u003e\n\n\u003cp\u003eMikroElektronika provides libraries and functions which simplify working with this device. For more detailed information on the functionality of this device, the TMP116 datasheet can be consulted.\u003c\/p\u003e\n\n\u003cp\u003eTemp-Log 2 click is capable of working with both 3.3V and 5V systems. The desired operational voltage can be selected by the VCC SEL SMD jumper. SCL and SDA lines are both pulled HIGH by the onboard resistors, so the Temp-Log 2 click is ready to be used right out of the box.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003csection\u003e\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eTemperature \u0026amp; humidity,Temperature Logging\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eCan be used for temperature measurement in a wide variety of communication, consumer, computer, industrial and similar applications - with an addition of the user data storage space\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003eTMP116, a high-accuracy, low-power, digital temperature sensor, from Texas Instruments\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eWide range of measurements with a high accuracy that exceeds even the accuracy of the RTD devices, low power consumption, non-volatile memory that offers configuration parameters storage, as well as the user-specific data\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eI2C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003emikroBUS\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eClick board size\u003c\/td\u003e\n            \u003ctd\u003eM (42.9 x 25.4 mm)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e3.3V or 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003ch3\u003ePinout diagram\u003c\/h3\u003e\n\n\u003cp\u003eThis table shows how the pinout on  \u003cstrong\u003eTemp-Log 2\u003c\/strong\u003e\u003cstrong\u003e Click Board™\u003c\/strong\u003e corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).\u003c\/p\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/mikrobus\/mikroBUS-logo-black.png\" src=\"https:\/\/cdn.mikroe.com\/img\/mikrobus\/mikroBUS-logo-black.png\"\u003e\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003eAN\u003c\/td\u003e\n            \u003ctd\u003ePWM\u003c\/td\u003e\n            \u003ctd\u003e16\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n            \u003ctd\u003eRST\u003c\/td\u003e\n            \u003ctd\u003eINT\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eALT\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eAlert\/INT\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n            \u003ctd\u003eCS\u003c\/td\u003e\n            \u003ctd\u003eRX\u003c\/td\u003e\n            \u003ctd\u003e14\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003eSCK\u003c\/td\u003e\n            \u003ctd\u003eTX\u003c\/td\u003e\n            \u003ctd\u003e13\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n            \u003ctd\u003eMISO\u003c\/td\u003e\n            \u003ctd\u003eSCL\u003c\/td\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSCL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Clock\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003eMOSI\u003c\/td\u003e\n            \u003ctd\u003eSDA\u003c\/td\u003e\n            \u003ctd\u003e11\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSDA\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Data\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePower Supply\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e+3V3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e7\u003c\/td\u003e\n            \u003ctd\u003e3.3V\u003c\/td\u003e\n            \u003ctd\u003e5V\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e+5V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003ePower Supply\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003e9\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTemp-Log click characteristics\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eDescription\u003c\/th\u003e\n            \u003cth\u003eMin\u003c\/th\u003e\n            \u003cth\u003eTyp\u003c\/th\u003e\n            \u003cth\u003eMax\u003c\/th\u003e\n            \u003cth\u003eUnit\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature measurement range\u003c\/td\u003e\n            \u003ctd\u003e-55\u003c\/td\u003e\n            \u003ctd\u003e+125\u003c\/td\u003e\n            \u003ctd\u003e°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature measurement accuracy\u003c\/td\u003e\n            \u003ctd\u003e± 0.2\u003c\/td\u003e\n            \u003ctd\u003e±0.3\u003c\/td\u003e\n            \u003ctd\u003e°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eI2C clock speed\u003c\/td\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003e400\u003c\/td\u003e\n            \u003ctd\u003ekHz\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOnboard settings and indicators\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eLabel\u003c\/th\u003e\n            \u003cth\u003eName\u003c\/th\u003e\n            \u003cth\u003eDefault\u003c\/th\u003e\n            \u003cth\u003eDescription\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLD1\u003c\/td\u003e\n            \u003ctd\u003ePWR\u003c\/td\u003e\n            \u003ctd\u003ePower LED indicator\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP1\u003c\/td\u003e\n            \u003ctd\u003eADDR SEL\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003eI2C address LSB selection: left position '0', right position '1'\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP2\u003c\/td\u003e\n            \u003ctd\u003eVCC SEL\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003ePower supply voltage selection: left position 3V3, right position 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e \u003c\/h3\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768416329917,"sku":"MIKROE-3004","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-temp-log-2-click-board-30217795829949.jpg?v=1685218976"},{"product_id":"mikroe-3329-temp-log-4-click-board-uk","title":"Temp-Log 4 Click Board™","description":"\u003cp\u003eThe SE97B IC meets JEDEC specification JC42.4-TSE2002B1, making it a viable solution for a memory module thermal sensor component. The SE97B is designed specifically for DRAM DIMMs (Dual In-line Memory Modules), allowing the Serial Presence Detect (SPD) feature. However, its use is not limited only to provide the SPD feature. The presence of EEPROM can be utilized for many different tasks: recording of temperature peaks, storage of event alerts, and similar. This makes the \u003cstrong\u003eTemp-Log 4 Click Board™\u003c\/strong\u003e a great solution for the development of various embedded applications based on temperature measurement and data logging.\u003c\/p\u003e\n\n\u003ch3\u003eHow Does The Temp-Log 4 Click Board™ Work?\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTemp-Log 4 Click Board™\u003c\/strong\u003e is equipped with the SE97B IC, a temperature sensor with integrated EEPROM, by NXP. This IC is used to convert the temperature measurement into digital information. Besides the thermal sensor, this IC also features 256 bytes of EEPROM on the same die. It is compliant with the JEDEC specification JC42.4-TSE2002B1 since it is designed specifically for DRAM DIMMs (Dual In-line Memory Modules), allowing the Serial Presence Detect (SPD) feature. However, it is not limited to this role only: it can be used as a very accurate general-purpose thermometer with the added benefit of integrated EEPROM, reducing the number of physical ICs required to design a temperature logging application. Temp-Log 4 click utilizes the I2C serial interface (SMBus compatible), which allows it to be used in a wide range of applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"MikroE Sensors Temp-Log 4 Click\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/www.mikroe.com\/img\/images\/Temp-Log-4-click-inner-img.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe temperature sensor section includes all the features typically found on such ICs. The band gap thermal sensor is sampled by a 11-bit delta-sigma A\/D converter. It is sampled about 10 times per second, and the thermal value is placed on the double-buffered output register. This prevents data corruption if access to the output registry is attempted during the conversion process. The specified accuracy of the temperature sensor is typically ±2 °C in the range from -40 °C to +125 °C, further improving near the operating temperature of DIMM, within the range between +40 °C to +125 °C.\u003c\/p\u003e\n\n\u003cp\u003eThe SE97B IC features the CAPABILITY register. This register is a read-only register and it provides some general information, such as the factory-specified accuracy in the upper-temperature range (+75°C to +95°C and +40°C to +125°C), measurement range, resolution, and other parameters of the sensor. Its description, along with the description of other registers, can be found in the SE97B IC datasheet.\u003c\/p\u003e\n\n\u003cp\u003eThe SE97B IC is fully configurable. It contains a set of registers for configuring the thermal sensor, the upper and the lower thermal limit, as well as the critical temperature. This IC features a very usable interrupt engine, designed mainly to support SPD functionality, but it can be utilized for much wider range of applications. The #EVENT pin is an open-drain, active-LOW pin used to alert the host microcontroller (MCU) or some other circuit, whether the programmed thresholds have been exceeded, or a critical temperature level has been reached. The SE97B allows two EVENT modes: the interrupt mode, and the comparator mode. The interrupt mode can be used in the embedded applications controlled by a MCU, while the comparator mode is used to directly control a circuit, since unlike the interrupt mode, it does not require the software to clear the Both the temperature and the EEPROM section have their own I2C address. The I2C address is determined by four fixed bit values, while the last three bits (LSBs) are determined by the logic states applied to A2, A1, and A0. While A0 and A1 address are hard-wired to a LOW logic level on this Click board™, the value of the A2 address bit can be changed by switching the SMD jumper labelled as ADDR SEL to either 0 (tied to GND) or 1 (tied to VCC). The datasheet of the SE97B offers a table with the content of these four bits for each section of the IC.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTemp-Log 4 Click Board™\u003c\/strong\u003e uses the I2C communication interface. It has pull-up resistors connected to the mikroBUS™ 3.3V rail. A proper conversion of logic voltage levels should be applied before the Click board™ is used with MCUs operated with 5V.\u003c\/p\u003e\n\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eTemperature \u0026amp; humidity,Temperature Logging\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eThe \u003cstrong\u003eTemp-Log 4 Click Board™\u003c\/strong\u003e is a great solution for the development of various embedded applications based on temperature measurement and data logging.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003eSE97B IC, a temperature sensor with integrated EEPROM, by NXP.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eA very high measurement accuracy and repeatability, programmable thresholds and hysteresis, a dedicated EVENT pin with a programmable function, selectable resolution, 256 bytes of integrated EEPROM, and more.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eI2C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003emikroBUS\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eClick board size\u003c\/td\u003e\n            \u003ctd\u003eM (42.9 x 25.4 mm)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e3.3V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePINOUT DIAGRAM\u003c\/h3\u003e\n\n\u003cp\u003eThis table shows how the pinout of the \u003cstrong\u003eTemp-Log 4 Click Board™ \u003c\/strong\u003ecorresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).\u003c\/p\u003e\n\n\u003ctable width=\"549\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth colspan=\"4\"\u003e\u003cimg alt=\"Mikrobus logo.png\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/mikrobus\/mikroBUS-logo-black.png\"\u003e\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003eAN\u003c\/td\u003e\n            \u003ctd\u003ePWM\u003c\/td\u003e\n            \u003ctd\u003e16\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n            \u003ctd\u003eRST\u003c\/td\u003e\n            \u003ctd\u003eINT\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eINT\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eAlert OUT\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n            \u003ctd\u003eCS\u003c\/td\u003e\n            \u003ctd\u003eRX\u003c\/td\u003e\n            \u003ctd\u003e14\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003eSCK\u003c\/td\u003e\n            \u003ctd\u003eTX\u003c\/td\u003e\n            \u003ctd\u003e13\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n            \u003ctd\u003eMISO\u003c\/td\u003e\n            \u003ctd\u003eSCL\u003c\/td\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSCL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Clock\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003eMOSI\u003c\/td\u003e\n            \u003ctd\u003eSDA\u003c\/td\u003e\n            \u003ctd\u003e11\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSDA\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Data\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePower Supply\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e+3V3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e7\u003c\/td\u003e\n            \u003ctd\u003e3.3V\u003c\/td\u003e\n            \u003ctd\u003e5V\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003e9\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eONBOARD SETTINGS AND INDICATORS\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eLabel\u003c\/th\u003e\n            \u003cth\u003eName\u003c\/th\u003e\n            \u003cth\u003eDefault\u003c\/th\u003e\n            \u003cth\u003eDescription\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePWR\u003c\/td\u003e\n            \u003ctd\u003ePWR\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003ePower LED indicator\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eADDR SEL\u003c\/td\u003e\n            \u003ctd\u003eADDR SEL\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003eI2C slave address selection: left position 0 (GND), right position 1 (VCC)\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e \u003c\/h3\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768421212349,"sku":"MIKROE-3329","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-temp-log-4-click-board-30217736388797.jpg?v=1685191979"},{"product_id":"mikroe-3437-temp-log-6-click-board-uk","title":"Temp-Log 6 Click Board™","description":"\u003cp\u003eThe MAX6642 features a high accuracy of ±1°C within the range between +60°C and +100°C, which is a critical thermal bandwidth of most IC with the substrate PNP transistor as a temperature sensor. However, the \u003cem\u003e\u003cstrong\u003eTemp-Log 6 Click Board™\u003c\/strong\u003e\u003c\/em\u003e can be operated within the range between -40°C to +125°C when used to measure the local temperature, or between 0°C and +150°C when measuring the remote PN junction. Features such as dual temperature measurement, high accuracy, and programmable ALARM events, allow this Click board™ to be used in many applications, including dual-zone thermal monitoring in FPGA, embedded, and PC systems, i.e. when it is required to monitor both the ambient temperature within the enclosure, as well as the IC die temperature, for test and measurement applications, and similar.\u003c\/p\u003e\n\n\u003ch3\u003eHow Does The Temp-Log 6 Click Board™ Work?\u003c\/h3\u003e\n\n\u003cp\u003eThe main component of the \u003cstrong\u003eTemp-Log 6 Click Board™\u003c\/strong\u003e is the MAX6642, a ±1°C, SMBus\/I2C compatible local\/remote temperature sensor with an overtemperature alarm, from Analog Devices. This sensor is capable of measuring its own die temperature, as well as a temperature of a remote PN junction, which can be either a PNP transistor on a substrate of some integrated component (typically CPU, FPGA, ASIC or GPU), but also a discrete diode-connected PNP transistor with its collector grounded. There are some specific requirements for a discrete component when using it as a remote temperature sensor: it has to be a small signal PNP transistor with its collector grounded along with its base, while the emitter is connected to the DXP input pin of the MAX6642. Datasheet of the MAX6642 also states some forward voltage ranges for the highest and the lowest expected temperatures, so the transistor should be selected according to these parameters. The discrete component can be connected to the screw terminal at the edge of the Click board™.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"MikroE Sensors Temp-Log 6 Click\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/www.mikroe.com\/img\/images\/temp-log-6-click-inner-img(1).jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe MAX6642 features a 10-bit ADC which results in having the 0.25°C resolution. For the local temperature sensing, there are only 8 bits of data available, while the full 10-bit resolution is used for the remote sensing. The MAX6642 IC automatically sends biasing current through the PN junctions, while the IC samples the forward voltage for the given current and calculates the temperature. The ADC integrates the result over a period of 60ms, reducing the noise that way. Therefore, the temperature acquisition is not particularly fast. In return, the temperature measurement results are more accurate and reliable.\u003c\/p\u003e\n\n\u003cp\u003eThe accuracy of the remote measurement depends on the ideality factor of the remote PN junction. The ideality factor is one of the listed specifications of devices equipped with such on-chip elements. The MAX6642 is designed for an ideality factor of 1.008, a typical value for the Intel Pentium III CPU. However, if using IC with a different ideality factor, a conversion formula needs to be applied. The conversion formula can be found within the MAX6642 datasheet.\u003c\/p\u003e\n\n\u003cp\u003eThe MAX6642 IC also features the ALERT reporting capability. If a programmed threshold is exceeded, the ALERT pin will be asserted to a LOW logic level. When the ALERT pin is asserted, it will remain latched until its STATUS register is read after the overtemperature condition no longer exists. Another way to clear the ALERT interrupt is to respond to the alert response address. This is a global I2C\/SMBus protocol, where the host MCU broadcasts a Receive Byte transmission after the interrupt is received. One (or more) slave devices which generated this interrupt will respond, sending their I2C slave address, following the bus arbitration rules. This protocol is explained in more details within the MAX6642 datasheet. The ALERT pin is routed to the INT pin of the mikroBUS™ and it is pulled up by a resistor.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTemp-Log 6 Click Board™\u003c\/strong\u003e uses an I2C interface to communicate with the host MCU. It is equipped with an SMD jumper labelled as VCC SEL. This jumper is used to select the power supply for the pull-up resistors on the I2C bus, allowing both 3.3V and 5V MCUs to be interfaced with this Click board™.\u003c\/p\u003e\n\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eTemperature \u0026amp; humidity,Temperature Logging\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eThe \u003cstrong\u003eTemp-Log 6 Click Board™\u003c\/strong\u003e can be used in many applications, including dual-zone thermal monitoring in FPGA, embedded, and PC systems, i.e. when it is required to monitor both the ambient temperature within the enclosure, as well as the IC die temperature, for test and measurement applications, and similar.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003eMAX6642, a ±1°C, SMBus\/I2C compatible local\/remote temperature sensor with an overtemperature alarm, produced by Maxim Integrated.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eA very high measurement accuracy and repeatability, ALARM thresholds, a dedicated ALARM interrupt pin, dual zone thermal monitoring (ambient temperature and remote temperature), suitable to be used for the on-chip PN junctions, etc.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eI2C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003emikroBUS\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eClick board size\u003c\/td\u003e\n            \u003ctd\u003eM (42.9 x 25.4 mm)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e3.3V or 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePINOUT DIAGRAM\u003c\/h3\u003e\n\n\u003cp\u003eThis table shows how the pinout of the \u003cstrong\u003eTemp-Log 6 Click Board™ \u003c\/strong\u003ecorresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).\u003c\/p\u003e\n\n\u003ctable width=\"549\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth colspan=\"4\"\u003e\u003cimg alt=\"Mikrobus logo.png\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/mikrobus\/mikroBUS-logo-black.png\"\u003e\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003eAN\u003c\/td\u003e\n            \u003ctd\u003ePWM\u003c\/td\u003e\n            \u003ctd\u003e16\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n            \u003ctd\u003eRST\u003c\/td\u003e\n            \u003ctd\u003eINT\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eINT\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eAlert OUT\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n            \u003ctd\u003eCS\u003c\/td\u003e\n            \u003ctd\u003eRX\u003c\/td\u003e\n            \u003ctd\u003e14\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003eSCK\u003c\/td\u003e\n            \u003ctd\u003eTX\u003c\/td\u003e\n            \u003ctd\u003e13\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n            \u003ctd\u003eMISO\u003c\/td\u003e\n            \u003ctd\u003eSCL\u003c\/td\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSCL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Clock\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003eMOSI\u003c\/td\u003e\n            \u003ctd\u003eSDA\u003c\/td\u003e\n            \u003ctd\u003e11\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSDA\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Data\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePower Supply\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e3.3V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e7\u003c\/td\u003e\n            \u003ctd\u003e3.3V\u003c\/td\u003e\n            \u003ctd\u003e5V\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e5V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003ePower Supply\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003e9\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eONBOARD SETTINGS AND INDICATORS\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eLabel\u003c\/th\u003e\n            \u003cth\u003eName\u003c\/th\u003e\n            \u003cth\u003eDefault\u003c\/th\u003e\n            \u003cth\u003eDescription\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLD1\u003c\/td\u003e\n            \u003ctd\u003ePWR\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003ePower indication LED\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJP1\u003c\/td\u003e\n            \u003ctd\u003eVCC SEL\u003c\/td\u003e\n            \u003ctd\u003eLeft\u003c\/td\u003e\n            \u003ctd\u003ePower supply voltage selection: left position 3.3V, right position 5V\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTB1\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003eRemote PN junction connector\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e \u003c\/h3\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768430223549,"sku":"MIKROE-3437","price":17.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-temp-log-6-click-board-30217671311549.jpg?v=1685047606"},{"product_id":"mikroe-3442-temp-log-5-click-board-uk","title":"Temp-Log 5 Click Board™","description":"\u003ch3\u003eHow Does The Temp-Log 5 Click Board™ Work?\u003c\/h3\u003e\n\n\u003cp\u003eThe sensor IC used on the Temp-Log 5 Click Board™ is CAT34TS02 from ON semiconductor that combines a JC42.4 compliant Temperature Sensor (TS) with 2 Kb of Serial Presence Detect (SPD) EEPROM. Temperature sensor measures and stores temperatures at least 10 times in a second, allowing it to be retrieved by the host MCU via the I2C interface. The result can be compared to critical limits, stored in internal registers. This allows the sensor to reduce the processing workload of the host MCU by employing the trigger limits mechanism: by asserting the EVENT line to a LOW logic level, the CAT34TS02 is able to wake up the host MCU, reducing the power consumption. The EVENT pin is routed to the INT pin of the mikroBUS™. The CAT34TS02 IC can be configured to trigger an EVENT in three different modes: Interrupt mode, Comparator mode, and Critical Temperature mode.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/www.mikroe.com\/img\/images\/temp-log-5-click-inner-img(1).jpg\" src=\"https:\/\/www.mikroe.com\/img\/images\/temp-log-5-click-inner-img(1).jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen set in the Interrupt Mode, the EVENT output will be asserted every time the temperature crosses one of the alarm limits. Once the temperature exceeds the critical limit, the EVENT remains asserted as long as the temperature stays above the critical limit. The EVENT can be cleared by setting a bit in a corresponding register (must be cleared by the software). However, the pin will remain asserted as long as the temperature exceeds the critical limits.\u003c\/p\u003e\n\n\u003cp\u003eIn the Comparator mode, the EVENT pin is asserted whenever the temperature is outside the predefined limit values and deasserted as soon as the temperature drops under the limit (no need to clear the bit by the software). If set in the Critical Temperature Mode, the EVENT pin will be asserted only if the temperature exceeds a critical threshold limit. The limit values can be programmed via the corresponding registers.\u003c\/p\u003e\n\n\u003cp\u003eCAT34TS02 IC uses the I2C\/SMBus protocols to communicate with the host MCU. Its I2C bus pins are routed to the mikroBUS™ I2C pins and are pulled to a HIGH logic level by the onboard resistors. The I2C slave address of the CAT34TS02 IC can be selected by ADDR pins A0, A1 and A2: LOW logic level clears the corresponding address bit (GND), while HIGH logic level sets the bit (VCC). This can be done using a group of onboard jumpers, positioned under the label ADDR SEL.\u003c\/p\u003e\n\n\u003cp\u003eThe provided click board™ library contains simple and easy to use functions, which simplify configuring and reading of the measurement data. These functions are demonstrated in the included example application and can be used as a reference for custom projects. These functions can be used in mikroC, mikroBasic and mikroPascal compilers for all MCU architectures, supported by MikroElektronika.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003csection\u003e\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eTemperature \u0026amp; humidity,Temperature Logging\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eTemp-Log 5 is a great solution for the development of various embedded applications based on temperature measurement and data logging.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003eCAT34TS02, a digital output temperature sensor with SPD EEPROM, by ON semiconductor\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eKey Features\u003c\/td\u003e\n            \u003ctd\u003eVery high measurement accuracy and repeatability, programmable thresholds and hysteresis, a dedicated EVENT pin with a programmable function, selectable resolution, 256 bytes of integrated EEPROM, and more\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eI2C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003emikroBUS\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eClick board size\u003c\/td\u003e\n            \u003ctd\u003eM (42.9 x 25.4 mm)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInput Voltage\u003c\/td\u003e\n            \u003ctd\u003e3.3V\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003ch3\u003ePinout diagram\u003c\/h3\u003e\n\n\u003cp\u003eThis table shows how the pinout on \u003cstrong\u003eTemp-Log 5\u003c\/strong\u003e\u003cstrong\u003e click\u003c\/strong\u003e corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).\u003c\/p\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/mikrobus\/mikroBUS-logo-black.png\" src=\"https:\/\/cdn.mikroe.com\/img\/mikrobus\/mikroBUS-logo-black.png\"\u003e\u003c\/th\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003eAN\u003c\/td\u003e\n            \u003ctd\u003ePWM\u003c\/td\u003e\n            \u003ctd\u003e16\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n            \u003ctd\u003eRST\u003c\/td\u003e\n            \u003ctd\u003eINT\u003c\/td\u003e\n            \u003ctd\u003e15\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eINT\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eInterrupt output\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n            \u003ctd\u003eCS\u003c\/td\u003e\n            \u003ctd\u003eRX\u003c\/td\u003e\n            \u003ctd\u003e14\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003eSCK\u003c\/td\u003e\n            \u003ctd\u003eTX\u003c\/td\u003e\n            \u003ctd\u003e13\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n            \u003ctd\u003eMISO\u003c\/td\u003e\n            \u003ctd\u003eSCL\u003c\/td\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSCL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Clock\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003eMOSI\u003c\/td\u003e\n            \u003ctd\u003eSDA\u003c\/td\u003e\n            \u003ctd\u003e11\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eSDA\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eI2C Data\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePower Supply\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e3.3V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e7\u003c\/td\u003e\n            \u003ctd\u003e3.3V\u003c\/td\u003e\n            \u003ctd\u003e5V\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003eNC\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003eGND\u003c\/td\u003e\n            \u003ctd\u003e9\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eGround\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eElectrical Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eDescription\u003c\/th\u003e\n            \u003cth\u003eMin\u003c\/th\u003e\n            \u003cth\u003eTyp\u003c\/th\u003e\n            \u003cth\u003eMax\u003c\/th\u003e\n            \u003cth\u003eUnit\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature Accuracy\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e+\/-0.2\u003c\/td\u003e\n            \u003ctd\u003e+\/-0.4\u003c\/td\u003e\n            \u003ctd\u003e°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature resolution\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e0.0625\u003c\/td\u003e\n            \u003ctd\u003e°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOperating temperature\u003c\/td\u003e\n            \u003ctd\u003e-45\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e130\u003c\/td\u003e\n            \u003ctd\u003e°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eActive range\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e±1.0\u003c\/td\u003e\n            \u003ctd\u003e°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eMonitor range\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e±2.0\u003c\/td\u003e\n            \u003ctd\u003e°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eSensing range\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e±3.0\u003c\/td\u003e\n            \u003ctd\u003e°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eI2C clock frequency\u003c\/td\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003e400\u003c\/td\u003e\n            \u003ctd\u003ekHz\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOnboard settings and indicators\u003c\/h3\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003cth\u003eLabel\u003c\/th\u003e\n            \u003cth\u003eName\u003c\/th\u003e\n            \u003cth\u003eDefault\u003c\/th\u003e\n            \u003cth\u003e Description\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLD1\u003c\/td\u003e\n            \u003ctd\u003ePWR\u003c\/td\u003e\n            \u003ctd\u003e-\u003c\/td\u003e\n            \u003ctd\u003ePWR indication LED\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e \u003c\/h3\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768430289085,"sku":"MIKROE-3442","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-click-board-temp-log-5-click-board-29648352706749.jpg?v=1685047603"},{"product_id":"lipowsky-baby-lin-rm-iii-can-lin-bus-adapter-uk","title":"Lipowsky Baby-LIN-RM-III CAN\/LIN Bus Simulator","description":"\u003cp\u003eThe \u003cstrong\u003eBaby-LIN-RM-III\u003c\/strong\u003e is a controller that can be used to control LIN or CAN interface using a standard computer. This device comes with an integrated 32-bit microcontroller that can perform all time-critical operations.\u003c\/p\u003e\n\n\u003ch2\u003eLINWorks V2 Software\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBaby-LIN-RM-III\u003c\/strong\u003e includes the easy-to-use LINWorks V2 software suite.\u003c\/p\u003e\n\n\u003cp\u003eBased on LDF or DBC files configurations can be set up within minutes. Each configuration can define which nodes from the bus will be simulated by the \u003cstrong\u003eBaby-LIN-RM-III\u003c\/strong\u003e (restbus simulation) or how a change of state at the digital inputs will change bus signals or trigger a macro. Via the digital inputs PWM signals can be read, scaled and mapped to bus signals.\u003c\/p\u003e\n\n\u003cp\u003eSignal values can be read can be read and written in real-time while other operations are in progress. This can be done via a Simple Menu found in the LINWorks suite or by a custom product or even via the API functions of a supplied DLL.\u003c\/p\u003e\n\n\u003ch2\u003eOperating System Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe LINWorks-V2 software suite is compatible to Win-XP, Win7, Win8 and Win10 (16 and 32-bit). A Linux version is available upon request.\u003c\/p\u003e\n\n\u003ch2\u003eDigital I\/O\u003c\/h2\u003e\n\n\u003cp\u003eAlso, the module's digital outputs can be controlled by the values of the bus signals. For instance; an output can be set, if a signal is equal to, not equal to, greater or less than a reference value. It also can be tested, if a certain signal value is within a given range or not.\u003c\/p\u003e\n\n\u003ch2\u003eLIN Bus Interface\u003c\/h2\u003e\n\n\u003cp\u003eThe implemented LIN driver supports bus voltages up to 36 volts and can be used to up to 200 Kbit\/s. These way even nodes that operate outside the standard limits of the LIN specifications can be controlled with the \u003cstrong\u003eBaby-LIN-RM-III\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eCAN Bus Interface\u003c\/h2\u003e\n\n\u003cp\u003eOne CAN interface is designed as a high-speed interface, conforming to ISO-11898 with a SN65HVD251 driver while the other interface utilises a fault-tolerant low-speed physical layer conforming to ISO-11519 with a TJA1054 transceiver.\u003c\/p\u003e\n\n\u003ch2\u003eGalvanically Isolated Interfaces\u003c\/h2\u003e\n\n\u003cp\u003eAll communication interfaces (LIN, CAN and USB) as well as the digital inputs are galvanically isolated from the module's logic circuit.\u003c\/p\u003e\n\n\u003ch2\u003eProgrammable Buttons\u003c\/h2\u003e\n\n\u003cp\u003eAdditionally, the Baby-LIN-RM-II offers two programmable buttons that may be configured to control the start and stop functions of the bus.\u003c\/p\u003e\n\n\u003ch2\u003eStand-alone Operation\u003c\/h2\u003e\n\n\u003cp\u003eThe configuration designed on a computer can be transferred to and stored on the device, allowing you to use the controller as a standalone device, without any computer.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBaby-LIN-RM-III\u003c\/strong\u003e makes is easy to add LIN or CAN bus communication capabilities to PLC-based test equipment such as durability test facilities, validation tests etc. The Baby-LIN-RM-II is equipped with a powerful 32-bit microcontroller that handles all time-critical operations such as message formatting and the decoding of the bus protocol.\u003cbr\u003e\n.\u003c\/p\u003e","brand":"Lipowsky Industrie Elektronik GmbH","offers":[{"title":"Default Title","offer_id":37768433893565,"sku":"BABY-LIN-RM-III","price":1175.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lipowsky-industrie-elektronik-gmbh-pc-adapter-lipowsky-baby-lin-rm-iii-lin-bus-adapter-34534838763743.jpg?v=1685093334"},{"product_id":"lineeye-le-110sa-asynchronous-protocol-analyser-uk","title":"Lineeye LE-110SA Line Monitor","description":"","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768451653821,"sku":"LE-110SA-E","price":625.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-analyser-lineeye-le-110sa-line-monitor-36514203042015.jpg?v=1684960131"},{"product_id":"lineeye-le-120sa-rs-232c-and-ttl-protocol-analyser-uk","title":"Lineeye LE-120SA Line Monitor","description":"","brand":"Lineeye Co Ltd","offers":[{"title":"Default Title","offer_id":37768451686589,"sku":"LE-120SA-E","price":625.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/lineeye-co-ltd-analyser-lineeye-le-120sa-line-monitor-36514295087327.jpg?v=1684960318"}],"url":"https:\/\/thedebugstore.com\/en-de\/collections\/bus-and-protocol-tools.oembed?page=6","provider":"Debug Store","version":"1.0","type":"link"}