User Manual
Picotest VRTS3 Distributed System Demo Board User Manual
- Brand
- Picotest
- Part number
- VRTS3
- Date
- 22 December 2015
- File
- PDF507 KB
The Picotest VRTS3 Distributed System Demo Board is a self-contained, USB-powered training platform designed for comprehensive power integrity measurements. This demonstration board contains eight individual circuit sections representing typical distributed system components.
The VRTS3 includes a 2.8MHz switching regulator, 2.5V voltage reference, 245MHz operational amplifier buffer, LD1086 linear regulator, 10MHz and 125MHz clock circuits, Short-Open-Load calibration ports, parallel tantalum and ceramic capacitors on PCB plane, and 50Ω microstrips with precision aberrations.
The board supports over 20 measurement types including 1-port impedance, Bode plots, non-invasive stability measurement, PSRR testing, output impedance, step load response, clock jitter analysis, crosstalk, plane impedance, and EMI testing using standard test equipment.
The VRTS3 includes a 2.8MHz switching regulator, 2.5V voltage reference, 245MHz operational amplifier buffer, LD1086 linear regulator, 10MHz and 125MHz clock circuits, Short-Open-Load calibration ports, parallel tantalum and ceramic capacitors on PCB plane, and 50Ω microstrips with precision aberrations.
The board supports over 20 measurement types including 1-port impedance, Bode plots, non-invasive stability measurement, PSRR testing, output impedance, step load response, clock jitter analysis, crosstalk, plane impedance, and EMI testing using standard test equipment.
