{"title":"Debuggers \u0026 Trace Tools","description":null,"products":[{"product_id":"em100pro-serial-flash-emulator-dediprog-uk","title":"Dediprog EM100Pro SPI Flash Emulator","description":"\u003cp\u003eThe Dediprog EM100Pro has replaced the EM100. This advanced tool has been designed in close cooperation with the Serial Flash suppliers to emulate the behaviours of all the market Serial Flash and also the next generation Serial Flash. HardwareThe EM100Pro has two 2.54mm pitch males connectors of: * 2x2 for the Reset and Trig signals * 2*10 for the Emulation signals The EM100Pro is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the EM100Pro 2x10 header pin out. DediProg also provides the EM100pro ISP Cable which is used to connect the EM100Pro programmer to the 2X5 2.54mm ISP Pin Header on board.\u003c\/p\u003e\n\n\u003ch3\u003eMemory Emulation: \u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEmulate all the market Serial Flash (suppliers, families, densities and future road map serial Flash). Memory part number to be selected by user on the software list.\u003c\/li\u003e\n    \u003cli\u003eDensities: from 512Kb to 512Mb SPI Flash\u003c\/li\u003e\n    \u003cli\u003eFrequency: from DC to 75MHz (chipset and application dependant)\u003c\/li\u003e\n    \u003cli\u003eI\/O: Unidirectional SPI input and output\u003c\/li\u003e\n    \u003cli\u003eTransparency: Small add-in capacitance to the application SPI bus\u003c\/li\u003e\n    \u003cli\u003ePins option: Support Wp, Hold and Reset features (when supported by the target Serial flash)\u003c\/li\u003e\n    \u003cli\u003eMemory Power: 3.3V, 3V, 2.5V, 1.8V 9 Vcc monitoring for Power On Reset and I\/O level auto set.\u003c\/li\u003e\n    \u003cli\u003eInstructions: Support standard market Serial flash instructions and features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e**To view the EM100 Pro full specification, look under downloads.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":37768306098365,"sku":"EM100PRO","price":375.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/dediprog-technology-co-ltd-emulator-dediprog-em100pro-spi-flash-emulator-23150685847741.jpg?v=1685095127"},{"product_id":"wice-me-leaptronix-uk","title":"Leaptronix WICE-ME Flash Emulator","description":"\u003cp\u003eSPI Module and FWH Modules are available as options.\u003c\/p\u003e","brand":"Leaptronix","offers":[{"title":"Default Title","offer_id":37768309407933,"sku":"WICE-ME","price":68.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/leap-electronic-co-ltd-emulator-wice-me-flash-emulator-29038517682365.jpg?v=1685132395"},{"product_id":"sauris-sau100-usb-v1-jtag-emulator-sauris-uk","title":"Sauris SAU100-USB v1 JTAG Emulator","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional JTAG Debugging Made Affordable\u003c\/h2\u003e\n\u003cp\u003eThe Sauris SAU100-USB v1 is a compact, USB-powered JTAG emulator providing professional debugging capabilities for Texas Instruments microcontrollers and DSPs at an exceptional price point. Built to XDS100v2 class specifications, this emulator delivers reliable real-time debugging, code download, and programming functionality through a simple USB 2.0 connection.\u003c\/p\u003e\n\u003ch3\u003eTexas Instruments Compatibility\u003c\/h3\u003e \u003cp\u003eEngineered specifically for TI processor families, the SAU100-USB supports comprehensive debugging across multiple architectures including C2000, C5000, C6000, ARM Cortex-M, ARM Cortex-R, and ARM Cortex-A series processors. Full compatibility with Code Composer Studio V4 and newer versions ensures seamless integration into existing development workflows.\u003c\/p\u003e\n\u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e \u003cdiv class=\"imgph\"\u003eJTAG 14-pin connector wiring diagram placeholder\u003c\/div\u003e \u003cpre\u003e\u003ccode\u003e Pin Assignment (TI 14-pin JTAG Header): Pin 1: TMS (Test Mode Select) Pin 2: nTRST (Test Reset) Pin 3: TDI (Test Data In) Pin 4: TDIS (Test Disconnect) Pin 5: VTRef (Voltage Reference) Pin 6: KEY (No Connection) Pin 7: TDO (Test Data Out) Pin 8: GND (Ground) Pin 9: RTCK (Return Test Clock) Pin 10: GND (Ground) Pin 11: TCK (Test Clock) Pin 12: GND (Ground) Pin 13: EMU0 (Emulation Pin 0) Pin 14: EMU1 (Emulation Pin 1) \u003c\/code\u003e\u003c\/pre\u003e\n\u003ch3\u003eDevelopment Environment Integration\u003c\/h3\u003e \u003cp\u003eThe SAU100-USB integrates directly with Code Composer Studio through standard XDS drivers, eliminating complex setup procedures. USB bus-powered operation requires no external power supply, whilst the compact form factor minimises desk space requirements. LED status indicators provide immediate visual feedback on connection status and emulation activity.\u003c\/p\u003e\n\u003cdiv class=\"spec-note\"\u003e \u003cstrong\u003eVoltage Compatibility:\u003c\/strong\u003e Supports target systems operating at 1.8V to 3.3V logic levels with automatic voltage detection and adjustment. \u003c\/div\u003e\n\u003ch3\u003eReady-to-Run Code Example\u003c\/h3\u003e \u003cpre\u003e\u003ccode\u003e \/\/ Basic CCS connection verification #include \"DSP28x_Project.h\"\nvoid main(void) {\nInitSysCtrl(); \/\/ Initialize system con\nrol InitGpio(); \/\/ Initial\nze GPIO DINT; \/\/ Disable globa\ninterrupts InitPieCtrl(); \/\/ Initia\nize PIE control IER = 0x0000; \/\/ Di\nable CPU interrupts IFR = 0x0000;\nData format:\n\ntext\n\/\/ Enable JTAG debug mode\nSysCtrlRegs.PCLKCR0.bit.TBCLKSYNC = 0;\nEINT;                  \/\/ Enable global interrupts\n\nwhile(1) {\n    \/\/ Debug breakpoint location\n    asm(\" NOP\");       \/\/ Set breakpoint here\n}\n}\n\u003c\/code\u003e\u003c\/pre\u003e\n\n\u003cdiv class=\"aside\"\u003e For optimal debugging performance, ensure target board ground connections are solid and keep JTAG cable length under 15cm to minimise signal integrity issues. \u003c\/div\u003e \u003c\/section\u003e","brand":"Sauris GmbH","offers":[{"title":"Default Title","offer_id":37768316027069,"sku":"SAU100-USB","price":44.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/sauris-gmbh-emulator-sau100-usb-v1-jtag-emulator-23152120823997.jpg?v=1685125550"},{"product_id":"usb2demon-cop-interface-macraigor-systems-uk","title":"Macraigor U2D-COP USB2Demon USB to COP JTAG","description":"\u003cp\u003eThe Macraigor Systems usb2Demonis a mid-cost interface used in the design, debug, and programming of microprocessor based embedded systems.\u003c\/p\u003e\n\n\u003cp\u003eOne side of the usb2Demon interfaces to the USB port of a host IBM compatible PC and the other side connects to an OCD (On-Chip Debug) port of the target system. This port may be JTAG, E-JTAG, OnCE, COP, BDM or any of several other types of connections. When connected to a USB 2.0 or USB 3.0 port on your PC, the usb2Demon will operate up to Hi-Speed USB rates (480Mb\/s).\u003c\/p\u003e\n\n\u003ch3\u003eFlash Programming Software\u003c\/h3\u003e\n\n\u003cp\u003eThe usb2Demon has the ability to be licenced to use the Macraigor Systems OCDemon Flash programming software. This allows the usb2Wiggler to program on-board Flash EPROM from any PC with the Macraigor Flash Programming software installed.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768332214461,"sku":"U2D-COP","price":687.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-u2d-cop-usb2demon-usb-to-cop-jtag-23152201498813.jpg?v=1685080198"},{"product_id":"usb2demon-24-pin-atom-interface-macraigor-systems-uk","title":"Macraigor U2D-Atom-24 USB2Demon USB to 24-pin Atom","description":"\u003cp\u003eThe Macraigor Systems usb2Demonis a mid-cost interface used in the design, debug, and programming of microprocessor based embedded systems.\u003c\/p\u003e\n\n\u003cp\u003eOne side of the usb2Demon interfaces to the USB port of a host IBM compatible PC and the other side connects to an OCD (On-Chip Debug) port of the target system. This port may be JTAG, E-JTAG, OnCE, COP, BDM or any of several other types of connections. When connected to a USB 2.0 or USB 3.0 port on your PC, the usb2Demon will operate up to Hi-Speed USB rates (480Mb\/s).\u003c\/p\u003e\n\n\u003ch3\u003eFlash Programming Software\u003c\/h3\u003e\n\n\u003cp\u003eThe usb2Demon has the ability to be licenced to use the Macraigor Systems OCDemon Flash programming software. This allows the usb2Wiggler to program on-board Flash EPROM from any PC with the Macraigor Flash Programming software installed.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768332345533,"sku":"U2D-ATOM-24","price":858.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-u2d-atom-24-usb2demon-usb-to-24-pin-atom-23152200974525.jpg?v=1685150029"},{"product_id":"usb2demon-31-pin-atom-interface-macraigor-systems-uk","title":"Macraigor U2D-Atom-31 USB2Demon USB to 31-pin Atom","description":"\u003cp\u003eThe Macraigor Systems usb2Demonis a mid-cost interface used in the design, debug, and programming of microprocessor based embedded systems.\u003c\/p\u003e\n\n\u003cp\u003eOne side of the usb2Demon interfaces to the USB port of a host IBM compatible PC and the other side connects to an OCD (On-Chip Debug) port of the target system. This port may be JTAG, E-JTAG, OnCE, COP, BDM or any of several other types of connections. When connected to a USB 2.0 or USB 3.0 port on your PC, the usb2Demon will operate up to Hi-Speed USB rates (480Mb\/s).\u003c\/p\u003e\n\n\u003ch3\u003eFlash Programming Software\u003c\/h3\u003e\n\n\u003cp\u003eThe usb2Demon has the ability to be licenced to use the Macraigor Systems OCDemon Flash programming software. This allows the usb2Wiggler to program on-board Flash EPROM from any PC with the Macraigor Flash Programming software installed.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768332411069,"sku":"U2D-ATOM-31","price":742.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-u2d-atom-31-usb2demon-usb-to-31-pin-atom-23152201007293.jpg?v=1685150038"},{"product_id":"mikroe-1100-mikroprog-stm32-uk","title":"MikroProg for STM32","description":"\u003cp\u003eThe\u003cstrong\u003e mikroProg for STM32\u003c\/strong\u003e is a fast programmer and hardware debugger based on ST-LINK v2. Smart engineering allows mikroProg to support all STM32 ARM Cortex™-M0, Cortex™-M3 and Cortex™-M4 and Cortex™-M7 devices in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika ARM compilers (mikroC, mikroBasic, mikroPascal).\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e mikroProg™ for STM32 is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for ARM®. Works with other ARM® compilers too!\u003c\/p\u003e\n\n\u003ch3\u003eSingleClick™ Debugging\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ has native support for hardware step-by-step Debugging. debugger is a separate DLL module in mikroElektronika ARM® compilers which supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6], Run To Cursor[F4] debugging operations. Also, debugger supports standard and advanced breakpoints, which enable you to exploit the full potential of fast debugging.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eOn board mikroProg™ programmer requires special programming software called mikroProg™ for ARM®. This software is used for programming ALL of STM32 ARM® Cortex-M3™ microcontroller families, Software has intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332673213,"sku":"MIKROE-1100","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-stm32-36570047119583.jpg?v=1684955815"},{"product_id":"mikroe-1505-mikroprog-ti-tiva-uk","title":"MikroProg for Tiva","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg for Tiva\u003c\/strong\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support all Tiva C Series and Stellaris ARM Cortex-M3 and Cortex-M4 devices from Texas Instruments in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in mikroElektronika ARM compilers.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikroprog-8051.jpg\" alt=\"Mikroprog for Tiva Debugger\/Programmer\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003ch2\u003eCompiler Compatibility\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMikroProgfor Tiva\u003c\/strong\u003e is supported with mikroC, mikroBasicand mikroPascalcompilers for ARM\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332705981,"sku":"MIKROE-1505","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-tiva-36570068123871.jpg?v=1684955808"},{"product_id":"mikroe-1383-mikroprog-atmel-avr-debugger-programmer-uk","title":"MikroProg for AVR","description":"\u003ch3\u003emikroProg for AVR\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003emikroProg for AVR \u003c\/strong\u003e is a fast USB programmer. Smart engineering allows mikroProg to support 92 Atmel AVR devices in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika AVR compilers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for AVR\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility \u003c\/strong\u003e \u003cstrong\u003emikroProg™ for AVR®\u003c\/strong\u003e is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for AVR®. You may also use mikroProg™ for AVR® as a standalone programming tool.\u003c\/p\u003e\n\n\u003ch3\u003eSame pinout as AVRProg\u003c\/h3\u003e\n\n\u003cp\u003eWe made sure to retain backward compatibility with our popular AVRProg programmer. This means that you can use mikroProg™ with your existing designs or mikroElektronika development boards for AVR® where IDC10 programming headers are already integrated.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for AVR connector\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/www.mikroe.com\/img\/cms\/mikroprog-connector-idc10-a.jpg\" src=\"https:\/\/www.mikroe.com\/img\/cms\/mikroprog-connector-idc10-a.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for AVR inside\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_for_avr_inside.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_for_avr_inside.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eOn board mikroProg programmer requires special programming software called AVRFlash. It is used for programming over 90 Atmel AVR microcontrollers. Software has intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroprog_for_avr_inside.jpg\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/screen-avr.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/screen-avr.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003emikroProg™ for AVR®\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332738749,"sku":"MIKROE-1383","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-avr-29818697220285.jpg?v=1685132386"},{"product_id":"mikroe-1748-mikroprog-ftdi-ft90x-uk","title":"MikroProg for FT90x","description":"\u003csection id=\"info-description\"\u003e\n\u003ch3\u003emikroProg for FT90x\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003emikroProg for FT90x\u003c\/strong\u003e\u003c\/em\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support all FTDI Chip's 32-bit FT90x MCUs in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in mikroElektronika FT90x compilers.\u003c\/p\u003e\n\u003cimg alt=\"mikroProg for FT90x connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\n\u003ch3\u003eSupports Your Favorite Boards\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003emikroProg for FT90x\u003c\/strong\u003e has a connector for one-wire programming and debugging, compatible with boards like clicker 2 for FT90x (all upcoming FT90x hardware tools will also have built-in support)\u003c\/p\u003e\n\u003cimg alt=\"mikroProg for FT90x with clicker 2 ft90x\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/clicker2_ft900_mikroprog.jpg\" width=\"100%\"\u003e\n\u003ch3\u003eYou Won't Rip Out The Cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programmer cable and created a holder to tie it firmly into place.\u003c\/p\u003e\n\u003cimg alt=\"mikroProg for FT90x cable\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_cable.jpg\" width=\"100%\"\u003e\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eA standalone programming software utility called mikroProg Suite™ for FT90x® is available as an alternative to programming the MCU directly from the FT90x compiler. This software is used for programming of all supported FT90x microcontrollers. The software has an intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003emikroProg™ for FT90x 5LP programmer\/debugger\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332771517,"sku":"MIKROE-1748","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-ft90x-29029285068989.jpg?v=1685132042"},{"product_id":"mikroe-1382-mikroprog-8051-debugger-programmer-uk","title":"MikroProg for 8051","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003emikroProg for 8051 \u003c\/strong\u003e\u003c\/em\u003eis a fast USB programmer. Smart engineering allows mikroProg to support Atmel AT89 devices in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika 8051 compilers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for 8051 connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003emikroProg™ for 8051\u003c\/strong\u003e is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for 8051. You may also use \u003cstrong\u003emikroProg™ for 8051\u003c\/strong\u003e as a standalone programming tool.\u003c\/p\u003e\n\n\u003ch3\u003eSame Pinout as 8051Prog2\u003c\/h3\u003e\n\n\u003cp\u003eWe made sure to retain backward compatibility with our popular 8051Prog2 programmer. This means that you can use mikroProg™ with your existing designs or mikroElektronika development boards for 8051 where IDC10 programming headers are already integrated.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for 8051 connector\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-8051-connector.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eYou Won't rip Out the Cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programmer cable and created a holder to tie it firmly into place.\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eOn board mikroProg™ programmer requires special programming software called 8051Flash. It is used for programming ALL of Atmel® AT89 microcontrollers. Software has intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"8051flash-window-screen.jpg\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/8051flash-window-screen.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003emikroProg™ for 8051\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332837053,"sku":"MIKROE-1382","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-8051-29818681491645.jpg?v=1685132210"},{"product_id":"mikroprog-microchip-pic-debugger-programmer-mikroe-764-uk","title":"MikroProg for PIC, DSPIC and PIC32","description":"\u003cp\u003e\u003cstrong\u003emikroProg for PIC, dsPIC and PIC32\u003c\/strong\u003e is a fast USB 2.0 programmer with mikroICD™ hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30\/33, PIC24 and PIC32 devices in a single programmer! It supports over 1000 microcontrollers from Microchip. Outstanding performance, easy operation and elegant design are it's top features. Debug your code and monitor code execution on the chip itself. mikroProg™ technology brings the power of hardware debugging to your favorite compiler.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompiler Compatibility \u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for PIC®, dsPIC® and PIC32®. Choose the flavour that you like the most.\u003c\/p\u003e\n\n\u003ch3\u003eFaster programming\u003c\/h3\u003e\n\n\u003cp\u003eWe have done major enhancements in programming and debugging algorithms, and boosted programmer electronics to make it all possible. And the results are stunning! mikroProg™ is up to 400% faster than LvPICFlash.\u003c\/p\u003e\n\n\u003ch3\u003eSingleClick™ Debugging\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ has native support for mikroICD™ - hardware step-by-step In-Circuit Debugging in mikroElektronika compilers. It supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6] Run To Cursor[F4] debugging operations, as well as standard and advanced breakpoints.\u003c\/p\u003e\n\n\u003ch3\u003eOne firmware for all Devices\u003c\/h3\u003e\n\n\u003cp\u003eWith mikroProg™, single firmware takes care of all supported architectures. Supporting new microcontrollers is easy. Just by downloading the latest version of mikroProg Suite™ your programmer is ready to program new devices.\u003c\/p\u003e\n\n\u003ch3\u003ePower your Target Board\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ can provide power supply to your target board. Using mikroProg Suite™ Software, or directly from your compiler you can set the voltage level to be generated for you. It can provide up to 150mA of current in the voltage range from 1.8–5V.\u003c\/p\u003e\n\n\u003ch3\u003eCompatible with PICFlash\u003c\/h3\u003e\n\n\u003cp\u003eIf you have already integrated previous programmer connector in your device, don't worry. mikroProg™ retained the original connector pinout. Use front row of the connector (next to the knob) when programming mikromedia boards.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidentally and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332869821,"sku":"MIKROE-764","price":199.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-pic-dspic-and-pic32-29818741391549.jpg?v=1685132390"},{"product_id":"mikroe-1449-mikroprog-psoc-5lp-uk","title":"MikroProg for PSoC 5LP","description":"\u003ch3\u003emikroProg for PSoC 5LP\u003c\/h3\u003e\n\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003emikroProg for PSoC\u003c\/strong\u003e\u003c\/em\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support all PSoC 5LP ARM Cortex™-M3 devices from Infineon in a single programmer! It's also supported in PSoC® Creator IDE. Outstanding performance, easy operation, elegant design and a low price are its top features.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for PSoC 5LP connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_8051_connected.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e \u003cstrong\u003emikroProg™ for PSoC® 5LP\u003c\/strong\u003e is supported in PSoC® Creator™, the free Windows-based IDE from Infineon which allows concurrent hardware and firmware design.\u003c\/p\u003e\n\n\u003ch3\u003eSupports your favorite boards\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003emikroProg™ for PSoC®\u003c\/strong\u003e features IDC10 JTAG connector for SWD programming and debugging, compatible with boards like mikromedia for PSoC® 5LP. You can also use an adapter to connect it to Cortex Debug connectors found on other PSoC® boards as well.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eBefore you start working with \u003cstrong\u003emikroProg for PSoC 5LP\u003c\/strong\u003e , you'll need to download PSoC® Programmer™ from Infineon's website (registration required). It is a programming application with the necessary Windows drivers included. For detailed instructions on installing the software and more information about the programmer itself.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for PSoC 5LP programmer software\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/psoc_programmer_software.png\" width=\"69%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003emikroProg™ for PSoC® 5LP\u003c\/strong\u003e programmer\/debugger\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332902589,"sku":"MIKROE-1449","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-psoc-5lp-29880948785341.jpg?v=1685106475"},{"product_id":"mikroe-1303-mikroprog-to-st-link-v2-adapter-uk","title":"MikroProg to ST-Link v2 Adapter","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg to ST-Link v2 Adapter\u003c\/strong\u003e allows you to connect mikroProg for STM32 programmer and hardware debugger to 20-pin male JTAG connector on your target board. The Adapter consists of one 2x10 male header and a 2x10 female socket. Its recommended to first place the adapter on 2x10 male header on the target board, and then plug in the mikroProg into the adapters 2x5 male header.\u003c\/p\u003e\n\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eAdapter\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eAdapter allows you to connect mikroProg for STM32 programmer and hardware debugger to 20-pin male JTAG connector on your target board\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003e2x10 male header and a 2x10 female socket\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eGPIO\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003eIDC10\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768337948861,"sku":"MIKROE-1303","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-adapter-mikroprog-to-st-link-v2-adapter-30237431660733.jpg?v=1685033743"},{"product_id":"raven-jtag-bdm-interface-for-mips-macraigor-uk","title":"Macraigor Raven JTAG\/BDM Interface for MIPS","description":"\u003cp\u003eRaven JTAG\/BDM Interface for MIPS.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768362885309,"sku":"RMIPS","price":687.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-raven-jtag-bdm-interface-for-mips-23152115712189.jpg?v=1685041497"},{"product_id":"macraigor-raven-jtag-bdm-interface-for-once-uk","title":"Macraigor Raven JTAG\/BDM Interface for OnCE","description":"\u003cp\u003eRaven JTAG\/BDM Interface for OnCE.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768362918077,"sku":"RONCE","price":687.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-raven-jtag-bdm-interface-for-once-23152116203709.jpg?v=1685041499"},{"product_id":"raven-jtag-bdm-interface-for-tx49-macraigor-uk","title":"Macraigor Raven JTAG\/BDM Interface for TX49","description":"\u003cp\u003eRaven JTAG\/BDM Interface for TX49.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768362950845,"sku":"RTX49","price":687.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-raven-jtag-bdm-interface-for-tx49-23152116236477.jpg?v=1685128427"},{"product_id":"wifidemon-jtag-interface-for-mips-macraigor-systems-uk","title":"Macraigor WiFiDemon JTAG Interface for MIPS","description":"\u003cp\u003eMacraigor WiFiDemon JTAG Interface for MIPS.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768363540669,"sku":"WIFI-MIPS","price":275.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-wifidemon-jtag-interface-for-mips-29038589903037.jpg?v=1685132574"},{"product_id":"wiggler-host-adapter-for-cop-macraigor-systems-uk","title":"Macraigor Wiggler Host Adapter for COP","description":"\u003cp\u003eThe original Macraigor Wiggler host adapter for COP.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768363638973,"sku":"WNPJ-COP","price":192.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-wiggler-host-adapter-for-cop-23152207233213.jpg?v=1685157593"},{"product_id":"macraigor-wbdm32-3v-wiggler-uk","title":"Macraigor Wiggler Host Adapter for CPU32 3V BDM","description":"\u003cp\u003eThe original Macraigor Wiggler host adapter for CPU32 3V BDM.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768363671741,"sku":"WBDM32-3V","price":236.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-wiggler-host-adapter-for-cpu32-3v-bdm-23152206184637.jpg?v=1685063992"},{"product_id":"wiggler-host-adapter-for-amcc-macraigor-systems-uk","title":"Macraigor Wiggler Host Adapter for AMCC","description":"\u003cp\u003eThe original Macraigor Wiggler host adapter for AMCC.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768363802813,"sku":"WAMCC","price":247.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-wiggler-host-adapter-for-amcc-23152207003837.jpg?v=1685157600"},{"product_id":"mikroe-2002-mikroprog-for-cec1302-uk","title":"MikroProg for CEC1302","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg for CEC\u003c\/strong\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support the CEC cryptographic engine with secure firmware updating. Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika ARM compilers (mikroC, mikroBasic and mikroPascal).\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikroprog-8051.jpg\" alt=\"MikroProg for CEC Debugger\/Programmer\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003cp\u003eThis mikroProg supports the CEC1302 and CEC1702(+EFUSE) microcontrollers from Microchip.\u003c\/p\u003e\u003ch2\u003eSingleClick Board™Debugging\u003c\/h2\u003e\u003cp\u003emikroProghas native support for hardware step-by-step Debugging. debugger is a separate DLL module in mikroElektronika ARM\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768364687549,"sku":"MIKROE-2002","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-cec-36570029195487.jpg?v=1684955818"},{"product_id":"mikroe-2331-mikroprog-kinetis-uk","title":"MikroProg for Kinetis","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003emikroProg for Kinetis\u003c\/strong\u003e\u003c\/em\u003e is a fast programmer and hardware debugger for NXP's ARM Cortex™-M microcontrollers from the Kinetis family. Outstanding performance, easy operation, elegant design and low price are its top features. \u003cstrong\u003emikroProg for Kinetis\u003c\/strong\u003e is fully supported in MikroElektronika ARM compilers (mikroC, mikroPascal, and mikroBasic).\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for Kinetis connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003emikroProg™ for Kinetis\u003c\/strong\u003e is supported with MikroElektronika mikroC™, mikroBasic™ and mikroPascal™ compilers for ARM® microcontrollers.\u003c\/p\u003e\n\n\u003ch3\u003eSingleClick™ Debugging\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ has native support for hardware step-by-step Debugging. debugger is a separate DLL module in mikroElektronika ARM® compilers which supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6], Run To Cursor[F4] debugging operations. Also, debugger supports standard and advanced breakpoints, which enable you to exploit the full potential of fast debugging.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programmer cable and created a holder to tie it firmly into place\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003emikroProg programmer requires special programming software called mikroProg Suite for ARM. This software is used for programming all supported Kinetis microcontrollers. The software has an intuitive interface and uses SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003ch3\u003eThe package Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003emikroProg™ for Kinetis\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768370127037,"sku":"MIKROE-2331","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-kinetis-36569989480671.jpg?v=1684955824"},{"product_id":"mikoprog-msp432-mikroe-2511-uk","title":"MikroProg for MSP432","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg for MSP432\u003c\/strong\u003e is a fast and reliable USB programmer and hardware debugger. This mikroProg supports the SimpleLink MSP432 microcontroller family from Texas Instruments. .\u003c\/p\u003e\u003ch2\u003eCompiler Compatibility\u003c\/h2\u003e\u003cp\u003emikroProg for MSP432 is supported with mikroC, mikroBasic and mikroPascal compilers for ARM.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768397095101,"sku":"MIKROE-2511","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-msp432-36570008420575.jpg?v=1684955821"},{"product_id":"zeroplus-lap-f-logic-analyser-professional-40-64-channel-lap-f164256m","title":"ZeroPlus LAP-F High-Performance PC-Based Logic Analyser 40\/64 Channel","description":"\u003cp\u003eExtremely compact and lightweight, the ZeroPlus ZeroPlus-LAP-F logic analyser connects to and is powered by the USB port of any desktop or ZeroPlus-Laptop PC making it very portable and ideal for use in the field. \u003c\/p\u003e\n\n\u003cp\u003eThe ZeroPlus-LAP-F) provides internal sampling rates up to 1GHz and up to 512M samples memory depth per channel.\u003c\/p\u003e\n\n\u003ch3\u003eTrigger\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e6 protocol triggers (hardware)(serial): I2C, I2S, SPI, SVID, UART(RS-232C\/422\/485), CAN 2.0B\u003c\/li\u003e\n    \u003cli\u003eTrigger types: Pattern \/ Edge \/ Pulse-Width \/ Interval\u003c\/li\u003e\n    \u003cli\u003eTrigger channels: 40\u003c\/li\u003e\n    \u003cli\u003eTrigger delay: Yes\u003c\/li\u003e\n    \u003cli\u003eTrigger levels: 256\u003c\/li\u003e\n    \u003cli\u003eTrigger pass: 1-65535\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eSpecial Software Features\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eZooming and panning\u003c\/li\u003e\n    \u003cli\u003eWaveform and UI Customization\u003c\/li\u003e\n    \u003cli\u003eState list and Waveform view\u003c\/li\u003e\n    \u003cli\u003ePacket list\u003c\/li\u003e\n    \u003cli\u003eWaveform Navigator\u003c\/li\u003e\n    \u003cli\u003eMemory view\u003c\/li\u003e\n    \u003cli\u003eStatistic\u003c\/li\u003e\n    \u003cli\u003eFile Comparison\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eCertifications\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eFCC \/ CE\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eActive Probes\/Signals\u003c\/h3\u003e\n\n\u003ctable border=\"0\" width=\"100%\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eP120LV\n            \u003cul\u003e\n                \u003cli\u003eDUT Bandwidth (Max.)：120 MHz\u003c\/li\u003e\n                \u003cli\u003eChannels (Max.)：Data 64 ch\u003c\/li\u003e\n                \u003cli\u003eSignal Type：Single-Ended Bus\u003c\/li\u003e\n                \u003cli\u003eInput Impedance \/ Capacitance：190 Kohm ± 10% \/ 4.3 pF ±2 pF\u003c\/li\u003e\n                \u003cli\u003eBus Voltage： VIH：0.6V-5V\u003c\/li\u003e\n                \u003cli\u003eInput DC Voltage (Max.): ± 10V\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cbr\u003e\n            \u003cbr\u003e\n            P200EM (4 ch + 1 ch (CLK))\n            \u003cul\u003e\n                \u003cli\u003eDUT Bandwidth (Max.)：200 MHz\u003c\/li\u003e\n                \u003cli\u003eChannels (Max.)：Data 32 ch\u003c\/li\u003e\n                \u003cli\u003eSignal Type：Single-Ended Bus\u003c\/li\u003e\n                \u003cli\u003eInput Impedance \/ Capacitance：190 Kohm ± 10% \/ 4.3 pF ±2 pF\u003c\/li\u003e\n                \u003cli\u003eBus Voltage： VIH：0.6V-5V\u003c\/li\u003e\n                \u003cli\u003eInput DC Voltage (Max.): ± 10V\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eProtocol Analysis Feature\u003c\/h3\u003e\n\n\u003cp\u003eOver 130 different protocols can be analysed by the LAP-C logic analyser: .\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1-Wire (Adv) Interface\u003c\/li\u003e\n    \u003cli\u003e1-Wire Interface\u003c\/li\u003e\n    \u003cli\u003e3-Wire Interface\u003c\/li\u003e\n    \u003cli\u003e7-segment LED Interface\u003c\/li\u003e\n    \u003cli\u003eAC97 Interface\u003c\/li\u003e\n    \u003cli\u003eAES\/EBU Interface\u003c\/li\u003e\n    \u003cli\u003eAMD SVI2 Interface\u003c\/li\u003e\n    \u003cli\u003eArithmetic Logic\u003c\/li\u003e\n    \u003cli\u003eBDM Interface\u003c\/li\u003e\n    \u003cli\u003eBMS Interface\u003c\/li\u003e\n    \u003cli\u003eCAN 2.0B Bus\u003c\/li\u003e\n    \u003cli\u003eCCIR656 Interface\u003c\/li\u003e\n    \u003cli\u003eCMOS Image Sensor Interface\u003c\/li\u003e\n    \u003cli\u003eCompact Flash 4.1 Interface\u003c\/li\u003e\n    \u003cli\u003eDALI Interface\u003c\/li\u003e\n    \u003cli\u003eDifferential Manchester Interface\u003c\/li\u003e\n    \u003cli\u003eDigital Logic\u003c\/li\u003e\n    \u003cli\u003eDigRF Interface\u003c\/li\u003e\n    \u003cli\u003eDMX512 Interface\u003c\/li\u003e\n    \u003cli\u003eDP Aux Channel 1.1 Interface\u003c\/li\u003e\n    \u003cli\u003eDSA Interface\u003c\/li\u003e\n    \u003cli\u003eDSI Bus\u003c\/li\u003e\n    \u003cli\u003eFlexRay 2.1A Bus\u003c\/li\u003e\n    \u003cli\u003eFWH Interface\u003c\/li\u003e\n    \u003cli\u003eGPIB\/IEEE488 Interface\u003c\/li\u003e\n    \u003cli\u003eHART Interface\u003c\/li\u003e\n    \u003cli\u003eHD Audio Interface\u003c\/li\u003e\n    \u003cli\u003eHDMI CEC Interface\u003c\/li\u003e\n    \u003cli\u003eHDQ Interface\u003c\/li\u003e\n    \u003cli\u003eHPI Interface\u003c\/li\u003e\n    \u003cli\u003eI2C EEPROM 24L Memory Interface\u003c\/li\u003e\n    \u003cli\u003eI2C EEPROM 24LCS Memory Interface\u003c\/li\u003e\n    \u003cli\u003eI2C Interface\u003c\/li\u003e\n    \u003cli\u003eI2S Interface\u003c\/li\u003e\n    \u003cli\u003eISO7816 UART Interface\u003c\/li\u003e\n    \u003cli\u003eJ-K Flip-flop\u003c\/li\u003e\n    \u003cli\u003eJTAG 2.0 Interface\u003c\/li\u003e\n    \u003cli\u003eKeeLoq Code Hopping Interface\u003c\/li\u003e\n    \u003cli\u003eKNX Interface\u003c\/li\u003e\n    \u003cli\u003eLCD12864 Display Interface\u003c\/li\u003e\n    \u003cli\u003eLCD1602 Display Interface\u003c\/li\u003e\n    \u003cli\u003eLED Pitch Array Interface\u003c\/li\u003e\n    \u003cli\u003eLG4572 Interface\u003c\/li\u003e\n    \u003cli\u003eLIN Bus 2.1\u003c\/li\u003e\n    \u003cli\u003eLine Code\u003c\/li\u003e\n    \u003cli\u003eLPC Bus\u003c\/li\u003e\n    \u003cli\u003eLPC-SERIRQ Interface\u003c\/li\u003e\n    \u003cli\u003eLPT Interface\u003c\/li\u003e\n    \u003cli\u003eManchester Encoding\u003c\/li\u003e\n    \u003cli\u003eMaxim DS1302 Interface\u003c\/li\u003e\n    \u003cli\u003eMaxim DS18B20 Interface\u003c\/li\u003e\n    \u003cli\u003eMCU-51 Disassembly\u003c\/li\u003e\n    \u003cli\u003eMDDI Interface\u003c\/li\u003e\n    \u003cli\u003eMHL-CBus\u003c\/li\u003e\n    \u003cli\u003eMicrowire Bus\u003c\/li\u003e\n    \u003cli\u003eMicrowire EEPROM 93C\u003c\/li\u003e\n    \u003cli\u003eMIDI Interface\u003c\/li\u003e\n    \u003cli\u003eMII Interface\u003c\/li\u003e\n    \u003cli\u003eMiller Interface\u003c\/li\u003e\n    \u003cli\u003eMIPI CSI-2 Interface\u003c\/li\u003e\n    \u003cli\u003eMIPI DSI Interface\u003c\/li\u003e\n    \u003cli\u003eModBus\u003c\/li\u003e\n    \u003cli\u003eModified Miller Interface\u003c\/li\u003e\n    \u003cli\u003eModified SPI Interface\u003c\/li\u003e\n    \u003cli\u003eMVB\u003c\/li\u003e\n    \u003cli\u003eNEC PD6122 Interface\u003c\/li\u003e\n    \u003cli\u003eOpentherm 2.2 Interface\u003c\/li\u003e\n    \u003cli\u003ePCI Bus\u003c\/li\u003e\n    \u003cli\u003ePCM Interface\u003c\/li\u003e\n    \u003cli\u003ePECI Interface\u003c\/li\u003e\n    \u003cli\u003ePhilips RC5 Interface\u003c\/li\u003e\n    \u003cli\u003ePhilips RC6 Interface\u003c\/li\u003e\n    \u003cli\u003eProfiBus\u003c\/li\u003e\n    \u003cli\u003ePS\/2 Interface\u003c\/li\u003e\n    \u003cli\u003ePSB Interface\u003c\/li\u003e\n    \u003cli\u003ePT2262\/PT2272 Interface\u003c\/li\u003e\n    \u003cli\u003eQuad SPI Interface\u003c\/li\u003e\n    \u003cli\u003eRGB Interface\u003c\/li\u003e\n    \u003cli\u003eS\/PDIF Interface\u003c\/li\u003e\n    \u003cli\u003eS2Cwire\/AS2Cwire Interface\u003c\/li\u003e\n    \u003cli\u003eSamsung K9 NAND Flash Interface\u003c\/li\u003e\n    \u003cli\u003eSCCB Interface\u003c\/li\u003e\n    \u003cli\u003eSD2.0\/SDIO Interface\u003c\/li\u003e\n    \u003cli\u003eSDQ Interface\u003c\/li\u003e\n    \u003cli\u003eSerial GPIO IBPI Interface\u003c\/li\u003e\n    \u003cli\u003eSHT11 Interface\u003c\/li\u003e\n    \u003cli\u003eSignia 6210 Interface\u003c\/li\u003e\n    \u003cli\u003eSingle Wire Debug (SWD) Interface\u003c\/li\u003e\n    \u003cli\u003eSITI DM114\/DM115 Interface\u003c\/li\u003e\n    \u003cli\u003eSLE4442 Interface\u003c\/li\u003e\n    \u003cli\u003eSMBus 2.0\u003c\/li\u003e\n    \u003cli\u003eSPI (Atmel 25F EEPROM)\u003c\/li\u003e\n    \u003cli\u003eSPI Interface\u003c\/li\u003e\n    \u003cli\u003eSPI Plus Interface\u003c\/li\u003e\n    \u003cli\u003eSSI Interface\u003c\/li\u003e\n    \u003cli\u003eST7669 Interface\u003c\/li\u003e\n    \u003cli\u003eSTBus\u003c\/li\u003e\n    \u003cli\u003eSVID Interface\u003c\/li\u003e\n    \u003cli\u003eUART (RS-232C\/RS-422\/RS-485) Interface\u003c\/li\u003e\n    \u003cli\u003eUNI\/O Interface\u003c\/li\u003e\n    \u003cli\u003eUp\/Down Counter\u003c\/li\u003e\n    \u003cli\u003eUSB v1.1 Interface\u003c\/li\u003e\n    \u003cli\u003eUSB v2.0 Interface\u003c\/li\u003e\n    \u003cli\u003eWIEGAND Interface\u003c\/li\u003e\n    \u003cli\u003eWTB Bus\u003c\/li\u003e\n    \u003cli\u003eWWV-WWVH-WWVB Interface\u003c\/li\u003e\n    \u003cli\u003eYK-5 Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eTest Probes\u003c\/h3\u003e\n\n\u003cp\u003eNinety two Test probes are included with the basic analyser. \u003ca href=\"https:\/\/www.thedebugstore.com\/products\/lap-probe-20-test-grabbers.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eAdditional hooks\u003c\/a\u003e are available as spares when needed.\u003c\/p\u003e","brand":"ZeroPlus Technology Co Ltd","offers":[{"title":"40 \/ 64M","offer_id":42025004073183,"sku":"LAP-F(14064M)","price":1350.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/zeroplus-technology-co-ltd-logic-analyser-lap-f-140512m-40-ch-logic-protocol-analyser-30245638176957.jpg?v=1685223289"},{"product_id":"mikroe-codegrip-for-arm-programmer-debugger-uk","title":"CODEGRIP for ARM","description":"\u003ch2\u003eWORLD'S FIRST DEBUGGER OVER WiFi\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip front debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDebugging and programming over WiFi\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP for ARM is first-ever embedded programmer \u0026amp; debugger over WiFi. Enjoy cable-free world!\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n*CODEGRIP WiFi License is available as an add-on feature.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip side debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAccess anywhere, under any circumstances at anytime\u003c\/h3\u003e\n\n\u003cp\u003eUnlimited possibilities for development, you can place the CODEGRIP for ARM programmer \u0026amp; debugger in almost any hardly accessible places such as hazardous environment, agricultural setting, and high-rise buildings while still retaining full debugging and programming access.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip back debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-back.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-back.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eRedefine technical support\u003c\/h3\u003e\n\n\u003cp\u003eReplicating user's hardware has always been a challenge, debugging trough WiFi enables technical support to directly access user's hardware.\u003cbr\u003e\nDo more with less effort!\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP programmer \u0026amp; debugger, please read the CODEGRIP Manual.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Programmer and debugger CODEGRIP arm v8 legend\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-in-position-and-legend.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-in-position-and-legend.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCODEGRIP SUITE\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot1\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot1.png\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot1.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCODEGRIP Suite\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP Suite is a powerful software tool. It is used to intelligently manage programming tasks, as well as various other options and settings of the CODEGRIP.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot2\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot2.png\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot2.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eEffortless programming with complete control over MCU's\u003c\/h3\u003e\n\n\u003cp\u003eWireless connectivity and USB-C connector allow seamless and effortless programming of a huge number of various ARM® Cortex-M based microcontrollers, providing users with both the mobility and the complete control over the microcontroller programming and debugging process.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot3\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot3.png\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot3.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePlug and play\u003c\/h3\u003e\n\n\u003cp\u003eUSB-C debugger enables effortless programming\/debugging over generic USB driver connection without the need for additional driver support.\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP Suite and module, please read the CODEGRIP Manual.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB-C","offer_id":43331307536607,"sku":"MIKROE-5273","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"USB-C and WiFi","offer_id":43331307569375,"sku":"MIKROE-3460","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-usb-c-and-wifi-codegrip-for-arm-38006674161887.jpg?v=1684977052"},{"product_id":"mikroe-codegrip-for-ti-tiva-programmer-debugger-uk","title":"CODEGRIP for Tiva","description":"\u003cp\u003eCODEGRIP for TI Tiva™ is the first Programmer \/ Debugger for ARM Cortex with a WiFi or USB-C interface. It supports all STM32 ARM Cortex-M based MCUs.\u003c\/p\u003e\n\n\u003cp\u003eNow you can debug and program your target board remotely. This is ideal if your target board is located in an inaccessible place such as a hazardous environment, in an agricultural setting or high-rise building.\u003c\/p\u003e\n\n\u003cp\u003eDo more, safely, and with less effort!\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB-C","offer_id":43425214595295,"sku":"MIKROE-5281","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"USB-C and WiFi","offer_id":43425214628063,"sku":"MIKROE-3463","price":251.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-codegrip-for-tiva-28869587665085.jpg?v=1685162102"},{"product_id":"mikroe-codegrip-for-nxp-kinetis-uk","title":"CODEGRIP for Kinetis","description":"\u003ch2\u003eUniversal Programmer and Debugger for Kinetis over USB-C and WiFi\u003c\/h2\u003e\n\n\u003ch3\u003eTHE WORLD'S FIRST DEBUGGER OVER WIFI\u003c\/h3\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip front debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDebugging and Programming Over WiFi\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP is the first-ever embedded programmer \u0026amp; debugger over WiFi. Enjoy a cable-free world!\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n*CODEGRIP WiFi License is available as an add-on feature. \u003cimg alt=\"codegrip side debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAccess Anywhere, Under Any Circumstance, Anytime\u003c\/h3\u003e\n\n\u003cp\u003eUnlimited possibilities for development, you can place the CODEGRIP programmer \u0026amp; debugger in almost any hardly accessible places such as hazardous environments, agricultural settings, and high-rise buildings while still retaining full debugging and programming access.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip back debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-back-kinetis.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eRedefines Technical Support\u003c\/h3\u003e\n\n\u003cp\u003eReplicating users' hardware has always been a challenge, debugging through WiFi enables technical support to directly access users' hardware.\u003cbr\u003e\nDo more with less effort!\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP programmer \u0026amp; debugger, please read the CODEGRIP Manual.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Programmer and debugger CODEGRIP arm v8 legend\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-in-position-and-legend.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCODEGRIP SUITE\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot1\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot1.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCODEGRIP Suite\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP Suite is a powerful software tool. It is used to intelligently manage programming tasks, as well as various other options and settings of the CODEGRIP.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot2\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot2.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eEffortless Programming with Complete MCU Control\u003c\/h3\u003e\n\n\u003cp\u003eWireless connectivity and USB-C connector allow seamless and effortless programming of a huge number of various Kinetis-based microcontrollers, providing users with both mobility and complete control over the microcontroller programming and debugging process.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot3\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot3.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePlug and Play\u003c\/h3\u003e\n\n\u003cp\u003eUSB-C debugger enables effortless programming\/debugging over generic USB driver connection without the need for additional driver support.\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP Suite and module, please read the CODEGRIP Manual.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"no","offer_id":43391496978655,"sku":"MIKROE-5280","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"Yes","offer_id":43391497011423,"sku":"MIKROE-3462","price":251.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-codegrip-for-kinetis-28869578621117.jpg?v=1685162453"},{"product_id":"zeroplus-lap-c-pro-logic-protocol-analyser-uk","title":"ZeroPlus LAP-C Pro Series Logic Analyser","description":"","brand":"ZeroPlus Technology Co Ltd","offers":[{"title":"LAP-C Pro(16064M) \/ TuffTest","offer_id":42025072558303,"sku":"TT-LAP-C Pro-16064M","price":925.0,"currency_code":"GBP","in_stock":true},{"title":"LAP-C Pro(32064M) \/ TuffTest","offer_id":42025072591071,"sku":"TT-LAP-C Pro-32064M","price":1375.0,"currency_code":"GBP","in_stock":true},{"title":"LAP-C Pro(32128M) \/ TuffTest","offer_id":42025072623839,"sku":"TT-LAP-C Pro-32128M","price":1975.0,"currency_code":"GBP","in_stock":true},{"title":"LAP-C Pro(32256M) \/ TuffTest","offer_id":42025072656607,"sku":"TT-LAP-C Pro-32256M","price":3000.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/zeroplus-technology-co-ltd-logic-analyser-lap-c-pro-16064m-zeroplus-lap-c-pro-series-logic-analyser-34533194072287.jpg?v=1685219520"},{"product_id":"dediprog-em100pro-g2-spi-nor-flash-emulator-uk","title":"Dediprog EM100Pro-G2 SPI NOR Flash Emulator","description":"\u003ch2\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n    \u003cli\u003eMinutes become seconds for SPI NOR Flash code update (3 seconds to update 2Gbit code)\u003c\/li\u003e\n    \u003cli\u003eSave up to 1 hour every day for your development and reduce your time to market\u003c\/li\u003e\n    \u003cli\u003eDebug efficiently your application through the available SPI bus with our SPI Trace, SPI Trigger, SPI Hyper Terminal for debug messages\u003c\/li\u003e\n    \u003cli\u003eDevelop your own application debugger via our bidirectional SPI Hyper terminal and control application from your host PC\u003c\/li\u003e\n    \u003cli\u003eEM100Pro-G2 can connect with Intel motherboard by specific adaptor ISP-ADP-Intel-C (Option).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePerformance (Erase+Program+Verify)\u003c\/h2\u003e\n\n\u003ctable align=\"center\" border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003eDensity \u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eProgrammer\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eEM100Pro-G2 Emulator\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e8Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e9s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e16Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e13s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e32Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e16s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e64Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e38s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e128Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e75s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e256Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e115s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e512Mb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e200s\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e1Gb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eN\/A\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e2Gb\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003eN\/A\u003c\/td\u003e\n            \u003ctd\u003e3s\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003e\n\u003cbr\u003e\n\u003cstrong\u003eHardware\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp\u003eThe EM100Pro-G2 has two 2.54mm pitch males connectors of:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e2x2 for the Reset and Trig signals\u003c\/li\u003e\n    \u003cli\u003e2x10 for the Emulation signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEM100Pro-G2 is designed with ISP header, through different cables\/adaptors, it can connect to the PCB board directly. Please refer to Table 1 for EM100Pro-G2 2x10 header pin out.\u003c\/p\u003e\n\n\u003cp\u003eDediProg also provides the EM100Pro-G2 ISP Cable which is used to connect the EM100Pro-G2 programmer to the 2X5 2.54mm ISP Pin Header on board, please refer to Table 2 for the EM100Pro-G2 ISP Cable 2x5 pin out.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eEM100Pro-G2 ISP Header Pin Out\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003ctable align=\"center\" border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eNC\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCS2\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e2\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCS1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eVcc\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e4\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eMISO\/DQ1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eHold\/DQ3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e6\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e7\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eWp\/DQ2\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCLK\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e8\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e9\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eMOSI\/DQ0\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e10\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e11\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e3.3V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eNC\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e12\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e13\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCTRL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eNC\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e14\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e15\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCTRL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e3.3V\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e16\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e17\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCTRL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCTRL\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e18\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e19\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eNC\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e20\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ctable align=\"center\" border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eReset\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e2\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eTrig\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e4\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eISP Cable Connector Pin Out (2x5)\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003ctable align=\"center\" border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eNC\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCS2\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e2\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCS1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eVcc\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e4\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eMISO\/DQ1\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eHold\/DQ3\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e6\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e7\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eWp\/DQ2\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eCLK\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e8\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\u003cstrong\u003e9\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003eMOSI\/DQ0\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003cstrong\u003e10\u003c\/strong\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eEM100Pro-G2 increases productivity by downloading firmware code or data into the emulator in a few seconds for density as large as 2Gb. In addition, it provides \"SPI BUS Analyzer\" feature by collecting all the SPI command and data on the SPI bus in order to help the debugging process.\u003cbr\u003e\nIt will speed up your firmware development and testing by eliminating the need to remove-erase-program and re-install SPI flash each time you test a code change.\u003cbr\u003e\nIf you want to stop the \"program\/insert\/boot\/remove\/erase\" cycle, then this is the tool for you.\u003c\/p\u003e","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":37768475541693,"sku":"EM100Pro-G2","price":695.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/dediprog-technology-co-ltd-emulator-dediprog-em100pro-g2-spi-nor-flash-emulator-29038557855933.jpg?v=1684997403"},{"product_id":"spi-adapter-pod-for-wice-me-flash-emulator-uk","title":"Leap SPI Adapter Pod for WICE-ME Flash Emulator","description":"","brand":"Leaptronix","offers":[{"title":"Default Title","offer_id":39743424069821,"sku":"WICE-ME-SPI","price":38.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/leap-electronic-co-ltd-programmer-adapter-spi-adapter-pod-for-wice-me-flash-emulator-28797888528573.jpg?v=1685135275"},{"product_id":"mikroe-codegrip-for-pic-uk","title":"CODEGRIP for PIC","description":"\u003cp\u003e\u003ci\u003e \u003c\/i\u003e \u003cimg alt=\"CODEGRIP yellow logo\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-logo.png\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eUniversal programmer and debugger for PIC, dsPIC   and PIC32 over USB-C and WiFi (optional)\u003c\/p\u003e\n\n\u003ch2\u003eThe World's First Debugger Over WiFi\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip front debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDebugging and Programming over WiFi\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP is the first-ever embedded programmer \u0026amp; debugger over WiFi. Enjoy a cable-free world!\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n*CODEGRIP WiFi License is available as an add-on feature. \u003cimg alt=\"codegrip side debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAccess anywhere, under any circumstances at anytime\u003c\/h3\u003e\n\n\u003cp\u003eUnlimited possibilities for development, you can place the CODEGRIP programmer \u0026amp; debugger in almost any hardly accessible places such as hazardous environment, agricultural setting, and high-rise buildings while still retaining full debugging and programming access.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip back debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-pic\/codegrip-pic-back.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eRedefine technical support\u003c\/h3\u003e\n\n\u003cp\u003eReplicating your hardware has always been a challenge; debugging through WiFi enables technical support to access your hardware if required directly.\u003c\/p\u003e\n\n\u003cp\u003eDo more with less effort!\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP programmer \u0026amp; debugger, please read the CODEGRIP Manual (see Downloads Tab).\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Programmer and debugger CODEGRIP PIC v8 legend\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-pic\/codegrip-pic-in-position-and-legend.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCODEGRIP Suite\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot1\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-pic\/codegrip-suite-scan-screenshot1.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCODEGRIP Suite\u003c\/h3\u003e\n\n\u003cp\u003eThe CODEGRIP Suite is a powerful software tool. It is used to intelligently manage programming tasks and various other options and settings of the CODEGRIP.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot2\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-pic\/codegrip-suite-scan-screenshot2.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eEffortless Programming with Complete Control over MCU's\u003c\/h3\u003e\n\n\u003cp\u003eWireless connectivity and USB-C connector allow seamless and effortless programming of many PIC microcontrollers, providing users with mobility and complete control over the microcontroller programming and debugging process.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot3\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-pic\/codegrip-suite-scan-screenshot3.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePlug and Play\u003c\/h3\u003e\n\n\u003cp\u003eThe USB-C Debugger enables effortless programming\/debugging over a generic USB driver connection without the need for additional driver support.\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP Suite and module, please read the CODEGRIP Manual.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB-C","offer_id":43329196982495,"sku":"MIKROE-5262","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"USB-C and WiFi","offer_id":43329197015263,"sku":"MIKROE-4544","price":270.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroe-programmer-codegrip-for-pic-37999688417503.jpg?v=1684971295"},{"product_id":"active-pro-debug-toolbox","title":"Active-Pro Firmware Debugger","description":"\u003cp\u003eThe Active-Pro Firmware Debugger (AP-FD) from Active Firmware Tools is a USB 2.0 firmware debugger and logic analyser that captures 8 digital channels at up to 120 Msps and 3 analogue channels at up to 1 Msps, time-aligned with debug output from up to four processors or FPGAs. Firmware sends text, values and events through the Active Debug Port on one or two GPIO pins, with 1 ns timestamps. It is built for firmware bring-up and multi-processor timing work, where stopping a core at a breakpoint would change the behaviour you are trying to see. It sits in our \u003ca href=\"\/collections\/logic-analysers\"\u003elogic analysers\u003c\/a\u003e range alongside the other \u003ca href=\"\/collections\/active-firmware-catalogue\"\u003eActive Firmware Tools debuggers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eActive Debug Port: Firmware Output from Up to Four Processors\u003c\/h2\u003e\n\u003cp\u003eFour Active Debug Ports (A to D) connect to four separate processors or FPGAs at once. Each runs as 1-wire UART on a TX pin (baud rates dividing exactly from 30 MHz, such as 1 Mbaud, 500 kbaud or 250 kbaud), 1-wire SWV on the SWV\/ITM pin of ARM Cortex-M parts, or 2-wire clock and data at up to 80 Mbit\/s, which an SPI peripheral in transmit-only mode can drive.\u003c\/p\u003e\n\u003cp\u003eOutput calls exist for C, C++, MicroPython, Verilog\/SystemVerilog and VHDL, with the library source published on GitHub.\u003c\/p\u003e\n\n\u003ch2\u003e8-Channel Logic Analyser with Analogue and Current Inputs\u003c\/h2\u003e\n\u003cp\u003eThe 8 digital channels sample at up to 120 Msps, and the FPGA in the pod frames hardware-decoded protocols at up to 240 Msps before data reaches the PC. Analogue CH1 and CH2 are single-ended, 0V to 20V or ±10V. CH3 works single-ended, or CH3 and CH4 work as a differential pair across a shunt resistor for current measurement (50 mΩ to 10 Ω recommended). All analogue inputs tolerate ±30V.\u003c\/p\u003e\n\u003cp\u003eThe capture buffer is set from 1 MB to 1 TB in host RAM. Triggers fire on analogue or digital edges, pulse widths, or firmware data itself: a text match or a value crossing a threshold on any Active Debug Port.\u003c\/p\u003e\n\n\u003ch2\u003eProtocol Decoding and Python Custom Decoders\u003c\/h2\u003e\n\u003cp\u003eHardware decoders cover I2C\/SMBus, UART (8- or 9-bit, normal or inverted) and four SPI variants; software adds 1-Wire, MDIO and CHSI on any port, and LIN, RS-232 and DS101 on Port A through the analogue inputs. Python custom decoders run after capture, with examples for CAN, Modbus, SWD, JTAG, I³C, QSPI and more.\u003c\/p\u003e\n\n\u003ch2\u003eSignal Outputs, Automation and Software\u003c\/h2\u003e\n\u003cp\u003eTwo digital outputs (0V, 3.3V or tri-state, 8 mA) and two analogue outputs (DC 0V to 3.3V; A1 also sine, ramp, triangle and square) stimulate the target. The application runs on Windows, Mac and Linux, with an Automation API and an MCP server for scripted test.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0, USB-C cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDigital channels\u003c\/th\u003e\n\u003ctd\u003e8, up to 120 Msps\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardware bus decoders\u003c\/th\u003e\n\u003ctd\u003eUp to 240 Msps\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnalogue channels\u003c\/th\u003e\n\u003ctd\u003e3, up to 1 Msps\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnalogue CH1, CH2 range\u003c\/th\u003e\n\u003ctd\u003eSingle-ended, 0V to 20V or ±10V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnalogue CH3\/CH4\u003c\/th\u003e\n\u003ctd\u003eSingle-ended or differential pair for current measurement\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnalogue input tolerance\u003c\/th\u003e\n\u003ctd\u003e±30V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eActive Debug Ports\u003c\/th\u003e\n\u003ctd\u003e4 (A to D), one processor or FPGA each\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eActive Debug Port modes\u003c\/th\u003e\n\u003ctd\u003e1-wire UART, 1-wire SWV, 2-wire clock and data up to 80 Mbit\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTimestamp resolution\u003c\/th\u003e\n\u003ctd\u003e1 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCapture buffer\u003c\/th\u003e\n\u003ctd\u003e1 MB to 1 TB, in host RAM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDigital outputs\u003c\/th\u003e\n\u003ctd\u003eD0, D1: 0V, 3.3V or tri-state, up to 8 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnalogue outputs\u003c\/th\u003e\n\u003ctd\u003eA0, A1: DC 0V to 3.3V; A1 also sine, ramp, triangle, square\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eWindows, Mac, Linux\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAnalogue sampling is 1 Msps, so it does not replace an oscilloscope for fast edges. The Active-Pro Ultra samples 6 analogue channels at up to 50 Msps.\u003c\/li\u003e\n  \u003cli\u003eFirmware must be instrumented with Active Debug Port output calls. It does not halt cores, set breakpoints or program flash.\u003c\/li\u003e\n  \u003cli\u003eCAN is not a built-in decoder in the current software build; use the supplied Python custom decoder example.\u003c\/li\u003e\n  \u003cli\u003eDigital inputs D0 to D7 accept -0.5V to +6V sustained (±30V transient), with the logic threshold adjustable from 0V to +4V. Check your target's I\/O levels against these before connecting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eComparison with Other Active Firmware Tools Debuggers\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDigital channels\u003c\/th\u003e\n\u003cth\u003eAnalogue channels\u003c\/th\u003e\n\u003cth\u003eActive Debug Ports\u003c\/th\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eActive Debugger\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eActive-Pro (this product)\u003c\/td\u003e\n\u003ctd\u003e8 at 120 Msps\u003c\/td\u003e\n\u003ctd\u003e3 at 1 Msps\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"active-pro-debug-toolbox\"\u003e£549\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eActive-Pro Ultra\u003c\/td\u003e\n\u003ctd\u003e8 at 500 Msps\u003c\/td\u003e\n\u003ctd\u003e6 at up to 50 Msps\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 SuperSpeed\u003c\/td\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eCorrelating Cortex-M state messages over SWV with the I2C sensor traffic they trigger. Logging sleep and wake events from a low-power MCU while measuring its supply current through a shunt on CH3\/CH4. Timing messages between a host MCU and an FPGA on separate ports against one 1 ns timebase.\u003c\/p\u003e\n\u003cp\u003eIt suits firmware engineers debugging live hardware that cannot be paused.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eActive-Pro pod\u003c\/li\u003e\n  \u003cli\u003e19 test clips\u003c\/li\u003e\n  \u003cli\u003eColour-coded test leads\u003c\/li\u003e\n  \u003cli\u003eUSB-C cable\u003c\/li\u003e\n  \u003cli\u003eStorage case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOrder the Active-Pro Firmware Debugger from \u003cspan data-ds-price=\"active-pro-debug-toolbox\"\u003e£549\u003c\/span\u003e ex VAT. Try the application in demo mode first, without hardware, to check the workflow.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I Need a JTAG or SWD Probe as Well?\u003c\/h3\u003e\n\u003cp\u003eNot for the Active Debug Port. It reads firmware output from a UART TX pin, two GPIO pins or the SWV pin on ARM Cortex-M parts, without halting the core. Keep your JTAG or SWD probe for flash programming and breakpoints.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAnswered by John Legg, Director, Debug Store\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich Operating Systems Does the Software Support?\u003c\/h3\u003e\n\u003cp\u003eWindows, Mac and Linux. The USB driver installs automatically when the pod is plugged in, and the Windows installer includes a Python 3 runtime for custom decoders.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAnswered by John Legg, Director, Debug Store\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eCan the Active-Pro Decode CAN?\u003c\/h3\u003e\n\u003cp\u003eYes, through a Python custom decoder. CAN is not a built-in decoder in the current build, but the application ships with a CAN example decoder that runs after capture stops.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAnswered by John Legg, Director, Debug Store\u003c\/small\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed: 30 October 2026\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (7 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/logic-analyzer\"\u003eActive-Pro product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/getting-started\"\u003eUser's Manual: Getting Started\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/main-window-stbtg\"\u003eUser's Manual: Active Debug Port, Firmware Integration\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/main-window-nxh86\"\u003eUser's Manual: Protocol Decoding\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/triggers\"\u003eUser's Manual: Buffers and Triggers\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/main-window-ad67j\"\u003eUser's Manual: Current Analyzer\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.activefirmwaretools.com\/usersmanualold\/main-window-5skjp\"\u003eUser's Manual: Devices\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"Active Firmware Tools","offers":[{"title":"Default Title","offer_id":44127073599711,"sku":"AP-FD","price":549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/active-firmware-tools-ap-fd-active-pro-firmware-debugger-43389743268063.png?v=1724368242"},{"product_id":"segger-j-link-pro-debugger-programmer-8-12-00","title":"SEGGER J-Link PRO – Ultra-Fast Ethernet\/USB Debug Probe","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional JTAG\/SWD Debug Probe with Dual Interface Connectivity\u003c\/h2\u003e\n\u003cp\u003eThe SEGGER J-Link PRO is a high-performance debug probe that combines USB and Ethernet interfaces for maximum flexibility in embedded development. With download speeds up to 4 MB\/s and support for remote debugging via Ethernet, this probe is ideal for professional development environments and test farms.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003ch3\u003eKey Technical Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eDual Interface:\u003c\/strong\u003e USB 2.0 Hi-Speed and 100 Mbit\/s Ethernet\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTarget Interface:\u003c\/strong\u003e JTAG\/SWD 20-pin standard connector\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDownload Speed:\u003c\/strong\u003e Up to 4 MB\/s via Ethernet, 3 MB\/s via USB\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTarget Voltage:\u003c\/strong\u003e 1.2V to 5V with automatic level detection\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e\n\u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e\n\u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVTRef\u003c\/td\u003e\n\u003ctd\u003eTarget voltage reference (1.2V-5V)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eNC\u003c\/td\u003e\n\u003ctd\u003eNot connected\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003enRST\u003c\/td\u003e\n\u003ctd\u003eTarget reset (open drain)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eTDI\u003c\/td\u003e\n\u003ctd\u003eJTAG data input\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eTMS\/SWDIO\u003c\/td\u003e\n\u003ctd\u003eTest mode select \/ SWD data I\/O\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eTCK\/SWCLK\u003c\/td\u003e\n\u003ctd\u003eTest clock \/ SWD clock\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003eTDO\/SWO\u003c\/td\u003e\n\u003ctd\u003eJTAG data output \/ SWD trace output\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003enSRST\u003c\/td\u003e\n\u003ctd\u003eSystem reset (optional)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003ctd\u003eVCC\u003c\/td\u003e\n\u003ctd\u003eTarget power supply (max 300mA)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e4,6,8,10,12,14,16,18,20\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround connections\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e\n\u003ch3\u003eEthernet Configuration\u003c\/h3\u003e\n\u003cp\u003eThe J-Link PRO supports DHCP by default and includes a built-in web server for easy network configuration. Access the configuration interface by connecting to the device's IP address in any web browser.\u003c\/p\u003e\n\u003cdiv class=\"spec-note\"\u003e \u003cstrong\u003eNetwork Requirements:\u003c\/strong\u003e Standard Ethernet network with DHCP server. Static IP configuration available via web interface or J-Link Configurator. \u003c\/div\u003e\n\u003cdiv class=\"imgph\"\u003e [Placeholder: J-Link PRO Ethernet connection diagram showing network setup] \u003c\/div\u003e\n\u003ch3\u003eSoftware Integration\u003c\/h3\u003e\n\u003cp\u003eCompatible with all major IDEs including SEGGER Embedded Studio, Keil µVision, IAR EWARM, Eclipse-based environments, and command-line tools via GDB Server. Includes licenses for:\u003c\/p\u003e\n\u003cul\u003e \u003cli\u003eUnlimited Flash Breakpoints\u003c\/li\u003e \u003cli\u003eSEGGER Ozone debugger\u003c\/li\u003e \u003cli\u003eJ-Flash programming software\u003c\/li\u003e \u003cli\u003eReal-Time Transfer (RTT) technology\u003c\/li\u003e \u003c\/ul\u003e\n\u003cpre\u003e\u003ccode\u003e\/\/ Example RTT output setup #include \"SEGGER_RTT.h\" void debug_output(void) { SEGGER_RTT_WriteString(0, \"Debug message via RTT\\n\"); }\u003c\/code\u003e\u003c\/pre\u003e\u003c\/section\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263171948767,"sku":"8.12.00","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-12-00-40189792583903.jpg?v=1688907179"},{"product_id":"segger-j-link-wifi-8-14-28","title":"SEGGER J-Link WiFi Wireless Debug Probe (8.14.28)","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional Wireless Debugging for Mobile Applications\u003c\/h2\u003e \u003cp\u003eThe J-Link WiFi represents a breakthrough in embedded debugging technology, combining SEGGER's industry-leading debug capabilities with wireless connectivity. This JTAG\/SWD debug probe operates at speeds up to 15MHz, delivering professional-grade debugging performance through a stable WiFi interface.\u003c\/p\u003e \u003ch3\u003eWireless Freedom for Modern Development\u003c\/h3\u003e \u003cp\u003eEliminate the constraints of physical connections when debugging mobile applications, robotic systems, or embedded devices that require movement during testing. The J-Link WiFi enables remote debugging scenarios previously impossible with traditional wired probes.\u003c\/p\u003e \u003cdiv class=\"aside\"\u003e \u003cstrong\u003eKey Applications:\u003c\/strong\u003e Mobile robotics, IoT devices in hazardous environments, rotating machinery, and any application where physical cable connections prove impractical or dangerous. \u003c\/div\u003e \u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e \u003cp\u003eConnect your target system using the standard 20-pin JTAG\/SWD interface:\u003c\/p\u003e \u003ctable class=\"tbl\"\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003ePin\u003c\/th\u003e \u003cth\u003eSignal\u003c\/th\u003e \u003cth\u003eDescription\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e1\u003c\/td\u003e \u003ctd\u003eVTref\u003c\/td\u003e \u003ctd\u003eTarget reference voltage (1.2V - 5V)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e7\u003c\/td\u003e \u003ctd\u003eSWDIO\u003c\/td\u003e \u003ctd\u003eSerial Wire Data I\/O (bidirectional)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e9\u003c\/td\u003e \u003ctd\u003eSWCLK\u003c\/td\u003e \u003ctd\u003eSerial Wire Clock\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e13\u003c\/td\u003e \u003ctd\u003eSWO\u003c\/td\u003e \u003ctd\u003eSerial Wire Output (trace data)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e15\u003c\/td\u003e \u003ctd\u003enRESET\u003c\/td\u003e \u003ctd\u003eTarget reset (active low)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e19\u003c\/td\u003e \u003ctd\u003e5V Supply\u003c\/td\u003e \u003ctd\u003eTarget power (max 300mA)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp class=\"spec-note\"\u003eEven-numbered pins (2, 4, 6, 8, 10, 12, 14, 16, 18, 20) connect to ground.\u003c\/p\u003e \u003ch3\u003eNetwork Configuration\u003c\/h3\u003e \u003cp\u003eThe J-Link WiFi includes a built-in web server for easy network configuration. Connect via USB initially to configure WiFi settings through the web interface at the device's IP address.\u003c\/p\u003e \u003cpre\u003e\u003ccode\u003e\/\/ Example GDB connection via WiFi target remote 192.168.1.100:2331 monitor reset load continue\u003c\/code\u003e\u003c\/pre\u003e \u003ch3\u003eProfessional Software Suite\u003c\/h3\u003e \u003cp\u003eIncludes comprehensive licenses for:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUnlimited Flash Breakpoints\u003c\/li\u003e \u003cli\u003eJ-Flash programming software\u003c\/li\u003e \u003cli\u003eOzone graphical debugger\u003c\/li\u003e \u003cli\u003eRDI\/RDDI interfaces\u003c\/li\u003e \u003cli\u003eGDB Server\u003c\/li\u003e \u003c\/ul\u003e \u003c\/section\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172014303,"sku":"8.14.28","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-14-28-segger-j-link-wifi-8-14-28-42714466615519.png?v=1722900000"},{"product_id":"segger-8-08-00-j-link-base-classic","title":"SEGGER J-Link BASE Classic USB JTAG\/SWD Debug Probe","description":"","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172079839,"sku":"8.08.00","price":470.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-08-00-40212524663007.jpg?v=1689508389"},{"product_id":"segger-j-link-plus-compact-8-19-28","title":"SEGGER J-Link PLUS Compact (8.19.28)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e \u003cp\u003eThe SEGGER J-Link PLUS Compact (SKU 8.19.28) is a USB-powered JTAG\/SWD debug probe in a small, mountable enclosure with USB-C. It offers the same functionality as the J-Link PLUS Classic, providing up to 15 MHz target interface clocking and SWO sampling up to 30 MHz via the standard 20-pin 0.1″ header. The J-Link Software and Documentation Pack includes GDB Server integration for major IDEs, the Ozone debugger and J-Flash for production-grade flash programming. A built-in Virtual COM (VCOM) bridge exposes a target UART to the host for logging and CLI access.\u003c\/p\u003e \u003ch3\u003ePart of the J-Link Family\u003c\/h3\u003e \u003cp\u003eIf you need higher interface speeds, see \u003ca href=\"https:\/\/thedebugstore.com\/products\/segger-j-link-ultra-debug-probe-uk?variant=44263171981535\"\u003eJ-Link ULTRA+\u003c\/a\u003e. For Ethernet and test farms, see \u003ca href=\"https:\/\/thedebugstore.com\/products\/segger-j-link-pro-debugger-programmer-8-12-00\"\u003eJ-Link PRO\u003c\/a\u003e. For entry-level use, consider \u003ca href=\"https:\/\/thedebugstore.com\/products\/segger-8-19-00-j-link-base-compact-debugger?variant=44263172145375\"\u003eJ-Link BASE Compact\u003c\/a\u003e. Adapters are available for compact headers, e.g. the \u003ca href=\"https:\/\/thedebugstore.com\/en-fi\/products\/segger-8-06-02-9-pin-cortex-m-adapter\"\u003e9-Pin Cortex-M Adapter\u003c\/a\u003e.\u003c\/p\u003e \u003ch3\u003eWhy Consider This Model?\u003c\/h3\u003e \u003cp\u003eThe PLUS Compact balances performance, broad device\/IDE support and a space-saving form factor that’s easy to secure inside fixtures or service kits. It is a practical, long-lived choice for multi-vendor ARM projects where consistent tooling, SWO visibility and dependable flash programming matter.\u003c\/p\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172112607,"sku":"8.19.28","price":660.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-19-28-40212529381599.jpg?v=1689508757"},{"product_id":"segger-8-19-00-j-link-base-compact-debugger","title":"SEGGER J-Link BASE Compact Debug Probe","description":"\u003cp\u003eThe SEGGER J-Link BASE Compact (part number 8.19.00) is a USB-powered JTAG\/SWD debug probe in a 46mm x 46mm x 17mm housing, with a 1.2V to 5V target interface, up to 15 MHz target interface speed and download speeds up to 1 MB\/s. It has the same J-Link BASE feature set as the desktop Classic model, with a USB-C host port and two mounting holes so it can stay inside a test fixture or end equipment. It suits firmware bring-up on Arm Cortex, RISC-V, Renesas RX and Microchip PIC32 targets, and fixed debug or programming stations where a full-size probe will not fit.\u003c\/p\u003e\n\n\u003ch2\u003eCompact JTAG\/SWD Debug Probe Built for Fixtures\u003c\/h2\u003e\n\u003cp\u003eAt 20g and 46mm square, with two mounting holes, the Compact is built to be fixed inside equipment housings, test jigs and development systems. The host link is USB 2.0 Hi-Speed over USB-C, and the probe is USB powered. On the target side it uses the standard J-Link 20-pin 0.1\" connector found on most J-Link models. Pin assignments and adapter options are in our \u003ca href=\"\/pages\/segger-j-link-20-pin-connector-pinout\"\u003eSEGGER J-Link 20-pin connector pinout\u003c\/a\u003e guide.\u003c\/p\u003e\n\n\u003ch2\u003eTarget Interfaces and Supported Cores\u003c\/h2\u003e\n\u003cp\u003eCurrent J-Link BASE hardware supports JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2. SEGGER's supported cores list covers Arm Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, legacy ARM7 to ARM1176, RISC-V cores from SiFive, Andes, Codasip and Nuclei, Renesas RX, Microchip PIC32 and Silicon Labs EFM8. The probe can also supply the target with 5V at up to 300mA from the USB rail.\u003c\/p\u003e\n\n\u003ch2\u003eRTT, VCOM and Trace Buffer Support\u003c\/h2\u003e\n\u003cp\u003eSEGGER Real Time Transfer (RTT) moves data between the running target and the host through the debug connection, so you can log or interact with an application without a spare UART. Where a UART is available, the VCOM function bridges it to a virtual COM port on the PC using pins 5 (J-Link Tx) and 17 (J-Link Rx) of the 20-pin connector; VCOM works only when debugging over SWD. Embedded Trace Buffer (ETB) and Micro Trace Buffer (MTB) are supported where the target implements them.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware and IDE Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe J-Link software and firmware updates are free. Setup and control software runs on Windows (x86-64 and Arm64), Linux (x86-64 and Arm64) and macOS (x86-64 and Apple Silicon). SEGGER lists full support in SEGGER Embedded Studio, Eclipse, IAR EWARM, Keil MDK-ARM, STM32CubeIDE, MCUXpresso and Visual Studio Code, among others. Several J-Links can run from one PC, each identified by its serial number.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eJ-Link BASE Compact probe, 20-pin 0.1\" ribbon cable and a USB-C cable. No adapter for 10-pin 0.05\" Cortex Debug headers is included.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Hi-Speed, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface\u003c\/th\u003e\n\u003ctd\u003eJTAG\/SWD 20-pin, 0.1\" (2.54mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported debug interfaces\u003c\/th\u003e\n\u003ctd\u003eJTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE, Silicon Labs C2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface voltage (VIF)\u003c\/th\u003e\n\u003ctd\u003e1.2V to 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget supply\u003c\/th\u003e\n\u003ctd\u003e5V (derived from USB), max. 300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget interface speed\u003c\/th\u003e\n\u003ctd\u003eMax. 15 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSWO sampling frequency\u003c\/th\u003e\n\u003ctd\u003eMax. 30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDownload speed\u003c\/th\u003e\n\u003ctd\u003eUp to 1 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eUSB powered, max. 50mA plus target supply current\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (without cables)\u003c\/th\u003e\n\u003ctd\u003e46mm x 46mm x 17mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWeight (without cables)\u003c\/th\u003e\n\u003ctd\u003e20g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e+5°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-20°C to +65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003eMax. 90% rH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEMC\u003c\/th\u003e\n\u003ctd\u003eEN 55022, EN 55024\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHost OS\u003c\/th\u003e\n\u003ctd\u003eWindows and Linux (x86-64, Arm64); macOS (x86-64, Apple Silicon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eJ-Flash and J-Flash SPI, Unlimited Flash Breakpoints, the Ozone debugger and the RDI licence pack are not included, and SEGGER lists monitor-mode debugging under the PLUS upgrade. They come with the J-Link PLUS, or with the BASE to PLUS upgrade licence for an existing BASE.\u003c\/li\u003e\n  \u003cli\u003eDownload speed is up to 1 MB\/s; SEGGER quotes up to 4 MB\/s for higher-tier J-Link models.\u003c\/li\u003e\n  \u003cli\u003eNo ETM trace (use SEGGER J-Trace) and no QSPI target interface.\u003c\/li\u003e\n  \u003cli\u003eVCOM is available only when debugging over SWD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJ-Link BASE Compact Compared with Related Models\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003cth\u003eHost connector\u003c\/th\u003e\n\u003cth\u003eJ-Flash, Ozone, Unlimited Flash Breakpoints\u003c\/th\u003e\n\u003cth\u003ePrice ex VAT\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eJ-Link BASE Compact (this product)\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, 20g, two mounting holes\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/segger-8-08-00-j-link-base-classic\"\u003eJ-Link BASE Classic\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 x 53 x 27mm, 70g\u003c\/td\u003e\n\u003ctd\u003eUSB Type B\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-8-08-00-j-link-base-classic\"\u003e£470\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/segger-j-link-plus-compact-8-19-28\"\u003eJ-Link PLUS Compact\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e46 x 46 x 17mm, two mounting holes\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"segger-j-link-plus-compact-8-19-28\"\u003e£660\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/j-link-upgrade-base-to-plus\"\u003eJ-Link Upgrade BASE to PLUS\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLicence for an existing BASE\u003c\/td\u003e\n\u003ctd\u003en\/a\u003c\/td\u003e\n\u003ctd\u003eAdds them\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-ds-price=\"j-link-upgrade-base-to-plus\"\u003e£320\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eFlash download and source-level debug of STM32, NXP LPC and Kinetis Cortex-M parts from STM32CubeIDE or MCUXpresso. A probe fixed inside a test jig, wired to a 20-pin header, for repeat debug access to Cortex-M33 or RISC-V boards in validation. RTT logging from a target with no free UART during firmware bring-up.\u003c\/p\u003e\n\u003cp\u003eChoose the Compact for a fixture or enclosure; for the bench, the Classic carries the same feature set in a larger housing.\u003c\/p\u003e\n\n\u003cp\u003eOrder the J-Link BASE Compact for \u003cspan data-ds-price=\"segger-8-19-00-j-link-base-compact-debugger\"\u003e£470\u003c\/span\u003e ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our \u003ca href=\"\/collections\/segger-debugger-catalogue-uk\"\u003eSEGGER debug probes\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat Is the Difference Between the BASE Compact and the BASE Classic?\u003c\/h3\u003e\n\u003cp\u003eThe housing and the host connector. The Compact measures 46mm x 46mm x 17mm, weighs 20g, has two mounting holes and a USB-C port; the Classic measures 100mm x 53mm x 27mm, weighs 70g and uses USB Type B. SEGGER lists no difference in electrical or performance specification.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAnswered by John Legg, Director, Debug Store\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eCan the J-Link BASE Compact Power My Target Board?\u003c\/h3\u003e\n\u003cp\u003eYes, within limits. It supplies 5V derived from USB at up to 300mA on the 20-pin connector. Boards that need more current, or a different supply voltage, need their own supply.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAnswered by John Legg, Director, Debug Store\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eDoes It Connect to a 10-Pin 0.05\" Cortex Debug Header?\u003c\/h3\u003e\n\u003cp\u003eNot directly. The probe has the 20-pin 0.1\" J-Link connector, so a 10-pin Cortex Debug header needs a SEGGER adapter. Our 20-pin pinout guide lists the signal assignments and the adapters.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAnswered by John Legg, Director, Debug Store\u003c\/small\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eLast reviewed 30\/10\/2026.\u003c\/small\u003e\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003csmall\u003eSources (4 manufacturer pages)\u003c\/small\u003e\u003c\/summary\u003e\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.segger.com\/products\/debug-probes\/j-link\/models\/j-link-base\/\"\u003eSEGGER J-Link BASE product page\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/J-Link_BASE\"\u003eSEGGER Knowledge Base: J-Link BASE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Using_J-Link_VCOM_functionality\"\u003eSEGGER Knowledge Base: Using J-Link VCOM functionality\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/kb.segger.com\/Supported_IDEs\"\u003eSEGGER Knowledge Base: Supported IDEs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172145375,"sku":"8.19.00","price":470.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-19-00-40212528234719.jpg?v=1689509458"},{"product_id":"segger-j-trace-pro-cortex-debugger","title":"SEGGER J-Trace PRO Cortex Trace Debugger","description":"","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172178143,"sku":"8.20.00","price":2005.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-20-00-40235997790431.jpg?v=1689939840"},{"product_id":"segger-j-trace-pro-cortex-m-8-18-00","title":"SEGGER J-Trace PRO Cortex-M Streaming Trace Debugger (8.18.00)","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional ARM Cortex-M Trace Debugging\u003c\/h2\u003e \u003cdiv class=\"imgph\"\u003eImage Placeholder — J-Trace PRO Connected to Target Board\u003c\/div\u003e \u003cp\u003eThe SEGGER J-Trace PRO Cortex-M represents a significant advancement in ARM Cortex-M debugging technology. Unlike conventional debug probes that rely on limited internal trace buffers, this professional instrument provides unlimited streaming trace capabilities through high-speed SuperSpeed USB 3.0 and Gigabit Ethernet interfaces.\u003c\/p\u003e \u003ch3\u003eStreaming Trace Technology\u003c\/h3\u003e \u003cp\u003eTraditional trace solutions capture instruction data in finite internal buffers, typically 4-32MB, which fills rapidly at high CPU frequencies. The J-Trace PRO Cortex-M eliminates this constraint by continuously streaming trace data to the host computer in real-time. This enables capture periods extending from minutes to months without data loss.\u003c\/p\u003e \u003cdiv class=\"aside\"\u003eThe 64MB internal trace buffer provides temporary storage during streaming interruptions, ensuring no trace data is lost during brief USB or network disconnections.\u003c\/div\u003e \u003ch3\u003eETM Instruction Tracing\u003c\/h3\u003e \u003cp\u003eARM Cortex-M cores with Embedded Trace Macrocell (ETM) capability output detailed instruction execution information through dedicated trace pins. The J-Trace PRO captures this data at up to 150MHz trace clock frequencies, providing complete visibility into program execution flow.\u003c\/p\u003e \u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eTrace Type\u003c\/th\u003e\n\u003cth\u003eInformation Captured\u003c\/th\u003e\n\u003cth\u003eUse Cases\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eInstruction Trace\u003c\/td\u003e\n\u003ctd\u003eEvery executed instruction with timing\u003c\/td\u003e\n\u003ctd\u003eProgram flow analysis, performance profiling\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eData Trace\u003c\/td\u003e\n\u003ctd\u003eMemory read\/write operations\u003c\/td\u003e\n\u003ctd\u003eData flow debugging, cache analysis\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eException Trace\u003c\/td\u003e\n\u003ctd\u003eInterrupt and exception handling\u003c\/td\u003e\n\u003ctd\u003eRTOS debugging, timing analysis\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch3\u003eLive Analysis Capabilities\u003c\/h3\u003e \u003cp\u003eThe streaming trace architecture enables sophisticated real-time analysis whilst the target executes at full speed. The included Ozone debugger processes trace data as it arrives, providing immediate insights into system behaviour.\u003c\/p\u003e \u003ch4\u003eLive Code Profiling\u003c\/h4\u003e \u003cp\u003eExecution profiling operates continuously without target performance impact. The system identifies function execution times, call frequencies, and performance bottlenecks in real-time. Engineers can observe hotspots developing during extended test runs and optimise accordingly.\u003c\/p\u003e \u003ch4\u003eLive Code Coverage\u003c\/h4\u003e \u003cp\u003eInstruction-level code coverage monitoring tracks which portions of the application execute during testing. This feature proves essential for safety-critical applications requiring verification that all code paths have been exercised according to regulatory standards such as DO-178C or ISO 26262.\u003c\/p\u003e \u003ch3\u003eHardware Architecture\u003c\/h3\u003e \u003cp\u003eThe J-Trace PRO Cortex-M features dual high-speed interfaces for maximum flexibility. SuperSpeed USB 3.0 provides up to 5Gbps bandwidth for streaming trace data, whilst the Gigabit Ethernet interface enables remote debugging scenarios.\u003c\/p\u003e \u003cdiv class=\"imgph\"\u003eImage Placeholder — J-Trace PRO Block Diagram\u003c\/div\u003e \u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003cth\u003eBandwidth\u003c\/th\u003e\n\u003cth\u003eUse Case\u003c\/th\u003e\n\u003cth\u003eBenefits\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eUSB 3.0\u003c\/td\u003e\n\u003ctd\u003e5 Gbps\u003c\/td\u003e\n\u003ctd\u003eDirect PC connection\u003c\/td\u003e\n\u003ctd\u003eHighest bandwidth, simple setup\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eGigabit Ethernet\u003c\/td\u003e\n\u003ctd\u003e1 Gbps\u003c\/td\u003e\n\u003ctd\u003eRemote debugging\u003c\/td\u003e\n\u003ctd\u003eNetwork access, isolation from EMI\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch3\u003eTarget Interface Specifications\u003c\/h3\u003e \u003cp\u003eThe probe provides separate connectors for debug and trace signals. The debug connector supports standard JTAG and SWD protocols at up to 50MHz clock frequencies. The dedicated trace connector handles high-speed ETM data capture.\u003c\/p\u003e \u003ch4\u003eDebug Connector (20-pin 0.1\")\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eJTAG: TDI, TDO, TCK, TMS, TRST\u003c\/li\u003e \u003cli\u003eSWD: SWDIO, SWDCLK\u003c\/li\u003e \u003cli\u003ePower: VTref, VCPout, Reset\u003c\/li\u003e \u003cli\u003eControl: nSRST, RTCK\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTrace Connector (20-pin 0.05\")\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eTrace Clock: TRACECLK\u003c\/li\u003e \u003cli\u003eTrace Data: TRACEDATA[3:0]\u003c\/li\u003e \u003cli\u003eSWO: Single Wire Output\u003c\/li\u003e \u003cli\u003ePower and Ground\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSoftware Integration\u003c\/h3\u003e \u003cp\u003eThe J-Trace PRO Cortex-M integrates seamlessly with existing development workflows. The probe operates with all major toolchains and IDEs through standard GDB remote protocol support.\u003c\/p\u003e \u003ch4\u003eIncluded Software\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eOzone Debugger:\u003c\/strong\u003e Professional graphical debugger with trace analysis\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eJ-Flash:\u003c\/strong\u003e High-speed flash programming utility\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eJ-Link GDB Server:\u003c\/strong\u003e GDB remote protocol server\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRTT Client:\u003c\/strong\u003e Real-Time Transfer communication tool\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eIDE Compatibility\u003c\/h4\u003e \u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevelopment Environment\u003c\/th\u003e\n\u003cth\u003eIntegration Method\u003c\/th\u003e\n\u003cth\u003eTrace Support\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eIAR Embedded Workbench\u003c\/td\u003e\n\u003ctd\u003eNative plugin\u003c\/td\u003e\n\u003ctd\u003eFull ETM analysis\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eKeil µVision MDK\u003c\/td\u003e\n\u003ctd\u003eNative plugin\u003c\/td\u003e\n\u003ctd\u003eComplete trace features\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eEclipse CDT\u003c\/td\u003e\n\u003ctd\u003eGDB remote protocol\u003c\/td\u003e\n\u003ctd\u003eBasic trace viewing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eVisual Studio Code\u003c\/td\u003e\n\u003ctd\u003eCortex-Debug extension\u003c\/td\u003e\n\u003ctd\u003eTrace data export\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch3\u003ePerformance Specifications\u003c\/h3\u003e \u003cdiv class=\"callout\"\u003e \u003ch4\u003eKey Performance Metrics\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMaximum trace clock frequency: 150 MHz\u003c\/li\u003e \u003cli\u003eFlash programming speed: Up to 4.0 MB\/s\u003c\/li\u003e \u003cli\u003eTarget interface speed: Up to 50 MHz\u003c\/li\u003e \u003cli\u003eSWO speed: Up to 100 MHz\u003c\/li\u003e \u003cli\u003eMaximum CPU frequency: Unlimited\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003ch3\u003eTrace Setup Example\u003c\/h3\u003e \u003cp\u003eSetting up streaming trace typically requires minimal target modifications. Most development boards expose trace pins on debug connectors.\u003c\/p\u003e \u003cpre\u003e\u003ccode\u003e\/\/ STM32F4 ETM configuration example void configure_etm_trace(void) { \/\/ Enable trace and debug clocks RCC-\u0026gt;AHB1ENR |= RCC_AHB1ENR_ETMEN; CoreDebug-\u0026gt;DEMCR |= CoreDebug_DEMCR_TRCENA_Msk; \/\/ Configure trace pins (PE2-PE6) GPIOE-\u0026gt;MODER |= (2 \u0026lt;\u0026lt; 4) | (2 \u0026lt;\u0026lt; 6) | (2 \u0026lt;\u0026lt; 8) | (2 \u0026lt;\u0026lt; 10) | (2 \u0026lt;\u0026lt; 12); GPIOE-\u0026gt;AFR |= (0 \u0026lt;\u0026lt; 8) | (0 \u0026lt;\u0026lt; 12) | (0 \u0026lt;\u0026lt; 16) | (0 \u0026lt;\u0026lt; 20) | (0 \u0026lt;\u0026lt; 24); \/\/ Setup ETM for instruction trace ETM-\u0026gt;CR = ETM_CR_ETMEN | ETM_CR_PROGBIT; ETM-\u0026gt;TRIGGER = 0x406F; ETM-\u0026gt;SR = 0x00000002; \/\/ Configure TPIU for parallel trace output TPIU-\u0026gt;CSPSR = 0x00000008; \/\/ 4-bit trace port TPIU-\u0026gt;ACPR = (SystemCoreClock \/ 2000000) - 1; \/\/ 2MHz trace clock TPIU-\u0026gt;SPPR = 0x00000000; \/\/ Parallel trace protocol TPIU-\u0026gt;FFCR = 0x00000100; \/\/ Formatter enabled } \u003c\/code\u003e\u003c\/pre\u003e \u003ch3\u003eAdvanced Debugging Scenarios\u003c\/h3\u003e \u003cp\u003eThe unlimited trace capture capability enables debugging scenarios impossible with traditional tools. Engineers can capture complete system execution over extended periods, then analyse the data to identify infrequent bugs or performance degradation patterns.\u003c\/p\u003e \u003ch4\u003eHard-to-Reproduce Bug Analysis\u003c\/h4\u003e \u003cp\u003eIntermittent faults that occur after hours or days of operation can be captured and analysed. The trace data provides complete visibility into the sequence of events leading to the fault condition.\u003c\/p\u003e \u003ch4\u003ePerformance Regression Testing\u003c\/h4\u003e \u003cp\u003eLong-term performance monitoring identifies gradual degradation in system performance. The live profiling features highlight when functions begin consuming excessive CPU time.\u003c\/p\u003e \u003ch4\u003eReal-Time System Analysis\u003c\/h4\u003e \u003cp\u003eRTOS-based applications benefit from complete task switching visibility. The trace data reveals scheduling behaviour, interrupt latencies, and resource contention issues.\u003c\/p\u003e \u003cdiv class=\"aside\"\u003eThe J-Trace PRO Cortex-M includes comprehensive example projects and tutorials to accelerate initial setup. The included Cortex-M Trace Reference Board provides an immediate evaluation platform.\u003c\/div\u003e \u003c\/section\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172210911,"sku":"8.18.00","price":1515.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-18-00-40212539080927.jpg?v=1689509285"},{"product_id":"segger-8-22-00-j-trace-pro-risc-v","title":"SEGGER J-Trace PRO RISC-V Debug Probe","description":"","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172243679,"sku":"8.22.00","price":2005.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-22-00-40212577452255.jpg?v=1689939145"},{"product_id":"segger-8-06-29-5v-target-supply-adapter","title":"SEGGER 5V Target Supply Adapter","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eWhat it is\u003c\/h2\u003e \u003cp class=\"aside\"\u003eCompact inline adapter that injects a regulated 5 V supply into the standard 20‑pin ARM\/JTAG ribbon, preserving a 1:1 pass‑through for all debug signals while powering the target from pin 19.\u003c\/p\u003e \u003ch3\u003eWhere it fits\u003c\/h3\u003e \u003cp\u003ePlugs directly between any compatible SEGGER J‑Link or Flasher and the 20‑pin ribbon cable, adding a fixed 5 V target supply without extra wiring or bench supplies.\u003c\/p\u003e \u003ch3\u003eKey specifications\u003c\/h3\u003e \u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eOutput voltage\u003c\/td\u003e\n\u003ctd\u003e5 V ±5 % (fixed, delivered on pin 19)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMax output current\u003c\/td\u003e\n\u003ctd\u003eUp to 500 mA (limited by host); typical J‑Link yields ≈5 V\/220 mA\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMax capacitive load\u003c\/td\u003e\n\u003ctd\u003e220 µF\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOutput ramp time\u003c\/td\u003e\n\u003ctd\u003e2–6 ms\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e20‑pin 0.1″ socket (probe side) to 20‑pin 0.1″ header (target side)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCompatible hosts\u003c\/td\u003e\n\u003ctd\u003eJ‑Link BASE\/PLUS\/ULTRA+\/PRO\/PRO PoE, WiFi, and Flashers\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003cp class=\"spec-note\"\u003eActual available current depends on the driving probe’s power capability; a typical J‑Link providing ~4.5 V\/300 mA supports about 220 mA at 5 V.\u003c\/p\u003e\n\u003ch3\u003eWiring quick‑start\u003c\/h3\u003e \u003col\u003e \u003cli\u003ePower down the target and disconnect any existing target supply sources to avoid back‑feeding.\u003c\/li\u003e \u003cli\u003eInsert the adapter between the J‑Link\/Flasher and the 20‑pin ribbon (socket to probe, header to cable).\u003c\/li\u003e \u003cli\u003eConnect the ribbon to the target’s 20‑pin ARM\/JTAG header, ensuring pin‑1 orientation.\u003c\/li\u003e \u003cli\u003ePower the J‑Link\/Flasher; the adapter will ramp 5 V to the target within 2–6 ms on pin 19.\u003c\/li\u003e \u003cli\u003eVerify target current draw stays within the host’s limit (typ. ~220 mA via standard J‑Link).\u003c\/li\u003e \u003c\/ol\u003e\n\u003ch3\u003e20‑pin ARM\/JTAG pinout (adapter preserves 1:1 signals)\u003c\/h3\u003e \u003cpre\u003e\u003ccode\u003e1: VTref 2: GND 3: nTRST 4: GND 5: TDI 6: GND 7: TMS\/SWDIO 8: GND 9: TCK\/SWCLK 10: GND 11: RTCK 12: GND 13: TDO\/SWO 14: GND 15: nRESET 16: GND 17: DBGRQ 18: GND 19: +5V OUT 20: GND \u003c\/code\u003e\u003c\/pre\u003e \u003cp class=\"aside\"\u003eThe adapter drives +5 V on pin 19; all other pins are pass‑through for standard JTAG\/SWD signalling per ARM 20‑pin assignment.\u003c\/p\u003e \u003ch3\u003eNotes and cautions\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not parallel external supplies; power the target either from the adapter or an external regulator, not both.\u003c\/li\u003e \u003cli\u003eLarge input capacitance above 220 µF may affect ramp behaviour or trip host limits.\u003c\/li\u003e \u003cli\u003eOutput voltage can be altered by resistor changes at user risk; use SEGGER’s adjustable adapter (8.06.18) if routinely needing 0.8–3.6 V.\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv class=\"imgph\"\u003eHero image placeholder — inline adapter between J‑Link and 20‑pin ribbon\u003c\/div\u003e \u003c\/section\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172276447,"sku":"8.06.29","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-29-40212885799135.jpg?v=1689520085"},{"product_id":"segger-8-06-11-2mm-adapter","title":"SEGGER 2mm Adapter","description":"","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172309215,"sku":"8.06.11","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-11-40212741292255.jpg?v=1689515939"},{"product_id":"segger-j-link-6-pin-needle-adapter-8-06-16","title":"SEGGER J-Link 6-Pin Needle Adapter (8.06.16)","description":"","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172341983,"sku":"8.06.16","price":110.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-16-40213023555807.jpg?v=1689526381"},{"product_id":"segger-8-06-03-14-pin-ti-adapter","title":"SEGGER 14-Pin TI Adapter with Cable","description":"","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172374751,"sku":"8.06.03","price":62.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-03-40215942758623.jpg?v=1689588121"},{"product_id":"segger-9-pin-cortex-m-adapter-8-06-02","title":"SEGGER 9-Pin Cortex-M Adapter (SKU 8.06.02)","description":"\u003csection class=\"product-rich\"\u003e\n\u003ch1\u003eSEGGER 9-Pin Cortex-M Adapter\u003c\/h1\u003e\n\u003cp class=\"spec-note\"\u003eAdapts the 20-pin 0.1″ J-Link\/Flasher header to the 9-pin 0.05″ Cortex‑M Samtec FTSH footprint for SWD, JTAG and SWO. Includes 9-pin ribbon cable. [SKU: 8.06.02]\u003c\/p\u003e\n\u003cp\u003eThe SEGGER 9-Pin Cortex‑M Adapter enables reliable JTAG, SWD, and SWO connections from any compatible J-Link or Flasher probe to targets that provide the compact 9‑pin 0.05″ Cortex‑M header defined by Arm. It converts the standard 20‑pin 0.1″ ribbon from the probe to the 9‑pin fine‑pitch Samtec FTSH connector used on many modern MCU boards. [SKU: 8.06.02]\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey terms\u003c\/strong\u003e (plain definitions): VTref — target I\/O level reference used by the probe to match logic levels; SWD — two‑wire Arm Serial Wire Debug (SWDIO, SWCLK); SWO — Serial Wire Output trace pin; JTAG — 4\/5‑wire IEEE 1149.1 debug; nRESET — active‑low target reset line; TRST — optional JTAG reset. [SKU: 8.06.02]\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with J-Link BASE\/PLUS\/ULTRA+\/PRO, J-Link WiFi\/Compact, and SEGGER Flasher units that expose the 20‑pin 0.1″ connector. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eTargets must provide the 9‑pin Samtec FTSH Cortex‑M pinout; non‑Cortex‑M targets are supported if the same 9‑pin pinout is used. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eTRST is not connected by default; solder bridge NR1 can route TRST to pin 9 when needed for JTAG. [SKU: 8.06.02]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"aside\"\u003eWhy 9‑pin? The “9‑pin” header follows the Arm Cortex Debug layout with one physical key omitted; some communities still refer to it as a “10‑pin” keyed header. [SKU: 8.06.02]\u003c\/div\u003e\n\u003ch2\u003ePinout (9‑pin Cortex‑M header)\u003c\/h2\u003e\n\u003cdiv class=\"tbl\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eDirection\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVTref\u003c\/td\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eTarget reference voltage for level matching and power‑present sense.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO \/ TMS\u003c\/td\u003e\n\u003ctd\u003eI\/O \/ Out\u003c\/td\u003e\n\u003ctd\u003eSWD data or JTAG TMS.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround\u003c\/td\u003e\n\u003ctd\u003eDigital ground.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK \/ TCK\u003c\/td\u003e\n\u003ctd\u003eOut\u003c\/td\u003e\n\u003ctd\u003eSWD clock or JTAG TCK.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround\u003c\/td\u003e\n\u003ctd\u003eDigital ground.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO \/ TDO\u003c\/td\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eSWO trace (SWD) or JTAG TDO.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e(7)\u003c\/td\u003e\n\u003ctd\u003eKey\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eKey location; physically not populated.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eNC \/ TDI\u003c\/td\u003e\n\u003ctd\u003eNC \/ Out\u003c\/td\u003e\n\u003ctd\u003eNot used for SWD; JTAG TDI when applicable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eNC (TRST)\u003c\/td\u003e\n\u003ctd\u003eNC\u003c\/td\u003e\n\u003ctd\u003eOptional TRST if NR1 solder bridge is closed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003ctd\u003eI\/O\u003c\/td\u003e\n\u003ctd\u003eActive‑low target reset.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWiring Quick‑Start\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eConnect the adapter to the J-Link\/Flasher 20‑pin 0.1″ cable with the red stripe at pin 1. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eAttach the included 9‑pin 0.05″ ribbon cable to the adapter and the target’s 9‑pin header, observing pin‑1 polarity. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eEnsure VTref (pin 1) matches target I\/O voltage; do not series‑resist this pin. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eFor SWD, only VTref, SWDIO, SWCLK, GND, nRESET, and optional SWO are required; leave TDI\/TRST unconnected. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eFor full JTAG, close NR1 if TRST is required by the target to guarantee TAP reset. [SKU: 8.06.02]\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eReady‑to‑run examples\u003c\/h2\u003e\n\u003ch3\u003eJ-Link Commander sanity check\u003c\/h3\u003e\n\u003cpre\u003e\u003ccode\u003e# Launch J-Link Commander and connect via SWD JLink.exe # In the CLI: connect Device \u0026gt; STM32F407VG Please specify target interface: J) JTAG S) SWD TIF \u0026gt; S Speed \u0026gt; 4000 r h q \u003c\/code\u003e\u003c\/pre\u003e\n\u003ch3\u003eOpenOCD minimal config (J-Link + SWD)\u003c\/h3\u003e\n\u003cpre\u003e\u003ccode\u003e# interface and transport interface jlink transport select swd adapter speed 4000\ntarget (example STM32F4)\nset CHIPNAME stm32f4x\nsource [find target\/stm32f4x.cfg]\ninit\nreset halt\n\u003c\/code\u003e\u003c\/pre\u003e\n\u003ch2\u003eMechanical\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProbe side: 20‑pin 0.1″ boxed header; target side: 9‑pin 0.05″ Samtec FTSH mating. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eIncludes 9‑pin cable; compact PCB fits tight target areas. [SKU: 8.06.02]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"imgph\"\u003e[Hero image placeholder — product front with 9‑pin cable]\u003c\/div\u003e\n\u003cdiv class=\"aside\"\u003eNR1 solder bridge lets advanced users enable TRST on pin 9 for strict JTAG reset sequencing when required. [SKU: 8.06.02]\u003c\/div\u003e\n\u003ch2\u003eCompetitor\/alternatives map\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSEGGER 19‑Pin Cortex‑M Adapter for Arm’s 19‑pin 0.05″ headers on some boards. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eSTDC14 14‑pin 0.05″ ecosystems (alternative header family) require different adapter types. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eFlying‑wire and Tag‑Connect solutions trade convenience for flexibility and test‑point use. [SKU: 8.06.02]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat makes it unique\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOfficial SEGGER adapter designed and validated for J-Link\/Flasher interoperability, reducing pinout mismatch risks. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eConfigurable TRST via NR1 to accommodate strict JTAG reset requirements without rewiring. [SKU: 8.06.02]\u003c\/li\u003e\n\u003cli\u003eSupplied 9‑pin ribbon ensures correct length\/impedance for clean SWD\/SWO signalling on fine‑pitch targets. [SKU: 8.06.02]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172440287,"sku":"8.06.02","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-02-40212738736351.jpg?v=1689515228"},{"product_id":"segger-8-06-04-10-pin-needle-adapter","title":"SEGGER 10-Pin Needle Adapter for J-Link Debug Programming","description":"\u003csection class=\"product-rich\"\u003e \u003ch3\u003eAdvanced Needle Adapter for Connector-Free Programming\u003c\/h3\u003e \u003cp\u003eThe SEGGER 10-Pin Needle Adapter transforms how engineers connect J-Link and Flasher debug probes to target PCBs. This precision adapter eliminates the need for mounted connectors on your circuit boards whilst providing reliable spring-pin contact to a specialised footprint pattern.\u003c\/p\u003e \u003ch4\u003eFoolproof Connection Design\u003c\/h4\u003e \u003cp class=\"spec-note\"\u003eThree strategically positioned locating pins ensure the adapter can only connect in the correct orientation, preventing costly connection errors during development and production programming.\u003c\/p\u003e \u003cdiv class=\"aside\"\u003e \u003cstrong\u003eCost-Saving PCB Design:\u003c\/strong\u003e Remove headers, save board real estate, reduce BOM costs by up to 15p per unit whilst maintaining professional debugging capabilities. \u003c\/div\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eInput Connector\u003c\/th\u003e\n\u003ctd\u003e20-pin 0.1\" (2.54mm) standard JTAG\/SWD\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eOutput Pattern\u003c\/th\u003e\n\u003ctd\u003e10-pin 0.05\" (1.27mm) needle pattern\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eSpring Pins\u003c\/th\u003e\n\u003ctd\u003eHigh-reliability, \u0026gt;100,000 cycle rating\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePCB Footprint\u003c\/th\u003e\n\u003ctd\u003eMinimal space requirement with tri-pin keying\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTarget Power\u003c\/th\u003e\n\u003ctd\u003eOptional 5V supply via pin 9 (300mA max)\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch4\u003eSignal Mapping \u0026amp; Pinout\u003c\/h4\u003e \u003cp\u003eThe adapter provides full JTAG and SWD signal access including:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eJTAG Signals:\u003c\/strong\u003e TCK, TDI, TDO, TMS, TRST\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSWD Signals:\u003c\/strong\u003e SWCLK, SWDIO, SWO\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e RESET, VTref, GND\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 5V target supply (optional)\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv class=\"imgph\"\u003eNeedle adapter PCB footprint pattern with positioning guides\u003c\/div\u003e \u003ch4\u003ePCB Layout Requirements\u003c\/h4\u003e \u003cpre\u003e\u003ccode\u003ePad Specifications: - Contact pads: 0.8mm diameter minimum - Positioning holes: 0.7mm diameter - Solder mask: Must be clear of contact pads - No solder paste on needle contact areas - 0.5mm clearance from other traces\u003c\/code\u003e\u003c\/pre\u003e \u003ch4\u003eCompatible Debug Probes\u003c\/h4\u003e \u003cp\u003eWorks seamlessly with all SEGGER debug tools including J-Link BASE, PLUS, PRO, ULTRA+, EDU, and Flasher series. The 20-pin standard interface ensures universal compatibility across the SEGGER ecosystem.\u003c\/p\u003e \u003cdiv class=\"callout\"\u003e \u003cstrong\u003eProduction Programming:\u003c\/strong\u003e Ideal for high-volume manufacturing where repeated connection cycles demand reliable contact without wear on target PCBs. \u003c\/div\u003e \u003c\/section\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172473055,"sku":"8.06.04","price":114.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-04-40212885340383.jpg?v=1689520082"},{"product_id":"segger-8-06-28-50-mil-10-pin-patch-adapter","title":"SEGGER 0.1\" To 50-mil 10-Pin Patch Adapter","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eTechnical Overview\u003c\/h2\u003e \u003cp\u003eThe SEGGER 50-Mil 10-Pin Patch Adapter bridges the gap between traditional 20-pin JTAG interfaces and modern compact 10-pin Cortex-M connectors. This professional-grade adapter serves dual purposes: standard Cortex-M connectivity and custom pin mapping for legacy or proprietary designs.\u003c\/p\u003e \u003ch3\u003eConnector Specifications\u003c\/h3\u003e \u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e\n\u003cth\u003eSide\u003c\/th\u003e\n\u003cth\u003eConnector Type\u003c\/th\u003e\n\u003cth\u003ePin Count\u003c\/th\u003e\n\u003cth\u003ePitch\u003c\/th\u003e\n\u003cth\u003eCompatible With\u003c\/th\u003e\n\u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e20-pin IDC Socket\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e0.1\" (2.54mm)\u003c\/td\u003e\n\u003ctd\u003eStandard JTAG debuggers\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e10-pin Header\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e0.05\" (1.27mm)\u003c\/td\u003e\n\u003ctd\u003eARM Cortex-M targets\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003ch3\u003eStandard Cortex-M Pinout\u003c\/h3\u003e \u003cp\u003eWhen used with the included ribbon cable, the adapter follows ARM's standard 10-pin Cortex-M debug connector specification:\u003c\/p\u003e \u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVTref\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO\/TMS\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK\/TCK\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO\/TDO\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eKEY (No pin)\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eNC\/TDI\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003cdiv class=\"aside\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e Pin 7 is keyed (no physical pin) to prevent incorrect insertion of the connector. \u003c\/div\u003e \u003ch3\u003eCustom Wiring Quick-Start\u003c\/h3\u003e \u003cp\u003eFor non-standard pinouts, replace the ribbon cable with individual jumper wires:\u003c\/p\u003e \u003col\u003e \u003cli\u003e\n\u003cstrong\u003eDisconnect the ribbon cable\u003c\/strong\u003e from the 10-pin header side\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eIdentify target pinout\u003c\/strong\u003e from your PCB documentation\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eConnect jumper wires\u003c\/strong\u003e between 20-pin test points and 10-pin header pins\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVerify connections\u003c\/strong\u003e with multimeter before powering target\u003c\/li\u003e \u003c\/ol\u003e \u003cdiv class=\"spec-note\"\u003e \u003cstrong\u003eEssential Connections:\u003c\/strong\u003e At minimum, connect VTref, GND, SWCLK, and SWDIO for SWD operation. Add nRESET for full debug control. \u003c\/div\u003e \u003ch3\u003eCompatible Debug Probes\u003c\/h3\u003e \u003cp\u003eThis adapter works with any debug probe featuring a standard 20-pin 0.1\" JTAG connector:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eSEGGER:\u003c\/strong\u003e J-Link BASE, PLUS, PRO, ULTRA+, WiFi, Flasher series\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSTMicroelectronics:\u003c\/strong\u003e ST-LINK\/V2, ST-LINK\/V3SET\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eP\u0026amp;E Micro:\u003c\/strong\u003e Multilink Universal, Cyclone ARM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eARM:\u003c\/strong\u003e ULINK2, ULINKplus (with adapter)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePCB Layout Considerations\u003c\/h3\u003e \u003cp\u003eWhen designing PCBs for 10-pin debug connectors:\u003c\/p\u003e \u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eRecommendation\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eSamtec FTSH-105-01-L-DV\u003c\/td\u003e\n\u003ctd\u003eShrouded, surface mount\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eKeep-out Zone\u003c\/td\u003e\n\u003ctd\u003e3mm all sides\u003c\/td\u003e\n\u003ctd\u003eFor connector and cable clearance\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eVia Size\u003c\/td\u003e\n\u003ctd\u003e0.2mm drill min\u003c\/td\u003e\n\u003ctd\u003eStandard PCB manufacturing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTrace Width\u003c\/td\u003e\n\u003ctd\u003e0.1mm minimum\u003c\/td\u003e\n\u003ctd\u003eFor high-speed signals\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003cdiv class=\"imgph\"\u003ePCB layout example showing optimal 10-pin debug connector placement with keep-out zones\u003c\/div\u003e \u003ch3\u003eSignal Integrity Guidelines\u003c\/h3\u003e \u003cp\u003eFor reliable high-speed debugging:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e Keep total cable length under 30cm\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eGround Planes:\u003c\/strong\u003e Use solid ground planes under debug traces\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e Match 50Ω characteristic impedance for clock signals\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTermination:\u003c\/strong\u003e Add series termination resistors if signal integrity issues occur\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTroubleshooting Common Issues\u003c\/h3\u003e \u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e\n\u003cth\u003eSymptom\u003c\/th\u003e\n\u003cth\u003ePossible Cause\u003c\/th\u003e\n\u003cth\u003eSolution\u003c\/th\u003e\n\u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eNo target detection\u003c\/td\u003e\n\u003ctd\u003eVTref not connected\u003c\/td\u003e\n\u003ctd\u003eVerify pin 1 connection to target VCC\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eIntermittent connection\u003c\/td\u003e\n\u003ctd\u003ePoor jumper wire contact\u003c\/td\u003e\n\u003ctd\u003eCheck all jumper wire connections\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHigh-speed programming fails\u003c\/td\u003e\n\u003ctd\u003eCable too long\u003c\/td\u003e\n\u003ctd\u003eReduce total cable length\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCannot reset target\u003c\/td\u003e\n\u003ctd\u003enRESET not connected\u003c\/td\u003e\n\u003ctd\u003eConnect pin 10 to target reset\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003ch3\u003eApplication Examples\u003c\/h3\u003e \u003ch4\u003eSpace-Constrained IoT Devices\u003c\/h4\u003e \u003cp\u003eModern IoT devices often cannot accommodate 20-pin connectors. This adapter enables the use of compact 10-pin connectors while maintaining compatibility with existing JTAG tools.\u003c\/p\u003e \u003ch4\u003eLegacy System Integration\u003c\/h4\u003e \u003cp\u003eWhen working with older designs that use non-standard debug pinouts, the custom wiring capability allows connection without PCB modifications.\u003c\/p\u003e \u003ch4\u003eProduction Programming\u003c\/h4\u003e \u003cp\u003eIn manufacturing environments, the compact connector reduces fixture complexity while maintaining programming speed and reliability.\u003c\/p\u003e \u003cdiv class=\"callout\"\u003e \u003cstrong\u003eProfessional Tip:\u003c\/strong\u003e Document custom wiring configurations in your project files. Create a simple wiring diagram showing the jumper wire connections for future reference. \u003c\/div\u003e \u003c\/section\u003e","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172505823,"sku":"8.06.28","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-28-40212735230175.jpg?v=1689515049"},{"product_id":"segger-8-06-15-intel-fpga-adapter","title":"SEGGER Intel FPGA Adapter","description":"","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172571359,"sku":"8.06.15","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-15-40212883308767.jpg?v=1689520088"},{"product_id":"segger-8-06-27-flying-wire-adapter","title":"SEGGER Flying Wire Adapter","description":"","brand":"SEGGER Microcontroller GmbH","offers":[{"title":"Default Title","offer_id":44263172604127,"sku":"8.06.27","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/segger-microcontroller-gmbh-8-06-27-40212744601823.jpg?v=1689515945"}],"url":"https:\/\/thedebugstore.com\/collections\/debuggers-and-trace-tools.oembed?page=6","provider":"Debug Store","version":"1.0","type":"link"}