{"title":"Debuggers \u0026 Trace Tools","description":null,"products":[{"product_id":"em100pro-serial-flash-emulator-dediprog-uk","title":"Dediprog EM100Pro SPI Flash Emulator","description":"\u003cp\u003eThe Dediprog EM100Pro has replaced the EM100. This advanced tool has been designed in close cooperation with the Serial Flash suppliers to emulate the behaviours of all the market Serial Flash and also the next generation Serial Flash. HardwareThe EM100Pro has two 2.54mm pitch males connectors of: * 2x2 for the Reset and Trig signals * 2*10 for the Emulation signals The EM100Pro is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the EM100Pro 2x10 header pin out. DediProg also provides the EM100pro ISP Cable which is used to connect the EM100Pro programmer to the 2X5 2.54mm ISP Pin Header on board.\u003c\/p\u003e\n\n\u003ch3\u003eMemory Emulation: \u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eEmulate all the market Serial Flash (suppliers, families, densities and future road map serial Flash). Memory part number to be selected by user on the software list.\u003c\/li\u003e\n    \u003cli\u003eDensities: from 512Kb to 512Mb SPI Flash\u003c\/li\u003e\n    \u003cli\u003eFrequency: from DC to 75MHz (chipset and application dependant)\u003c\/li\u003e\n    \u003cli\u003eI\/O: Unidirectional SPI input and output\u003c\/li\u003e\n    \u003cli\u003eTransparency: Small add-in capacitance to the application SPI bus\u003c\/li\u003e\n    \u003cli\u003ePins option: Support Wp, Hold and Reset features (when supported by the target Serial flash)\u003c\/li\u003e\n    \u003cli\u003eMemory Power: 3.3V, 3V, 2.5V, 1.8V 9 Vcc monitoring for Power On Reset and I\/O level auto set.\u003c\/li\u003e\n    \u003cli\u003eInstructions: Support standard market Serial flash instructions and features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e**To view the EM100 Pro full specification, look under downloads.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Dediprog Technology Co Ltd","offers":[{"title":"Default Title","offer_id":37768306098365,"sku":"EM100PRO","price":375.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/dediprog-technology-co-ltd-emulator-dediprog-em100pro-spi-flash-emulator-23150685847741.jpg?v=1685095127"},{"product_id":"wice-me-leaptronix-uk","title":"Leaptronix WICE-ME Flash Emulator","description":"\u003cp\u003eSPI Module and FWH Modules are available as options.\u003c\/p\u003e","brand":"Leaptronix","offers":[{"title":"Default Title","offer_id":37768309407933,"sku":"WICE-ME","price":68.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/leap-electronic-co-ltd-emulator-wice-me-flash-emulator-29038517682365.jpg?v=1685132395"},{"product_id":"sauris-sau100-usb-v1-jtag-emulator-sauris-uk","title":"Sauris SAU100-USB v1 JTAG Emulator","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional JTAG Debugging Made Affordable\u003c\/h2\u003e\n\u003cp\u003eThe Sauris SAU100-USB v1 is a compact, USB-powered JTAG emulator providing professional debugging capabilities for Texas Instruments microcontrollers and DSPs at an exceptional price point. Built to XDS100v2 class specifications, this emulator delivers reliable real-time debugging, code download, and programming functionality through a simple USB 2.0 connection.\u003c\/p\u003e\n\u003ch3\u003eTexas Instruments Compatibility\u003c\/h3\u003e \u003cp\u003eEngineered specifically for TI processor families, the SAU100-USB supports comprehensive debugging across multiple architectures including C2000, C5000, C6000, ARM Cortex-M, ARM Cortex-R, and ARM Cortex-A series processors. Full compatibility with Code Composer Studio V4 and newer versions ensures seamless integration into existing development workflows.\u003c\/p\u003e\n\u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e \u003cdiv class=\"imgph\"\u003eJTAG 14-pin connector wiring diagram placeholder\u003c\/div\u003e \u003cpre\u003e\u003ccode\u003e Pin Assignment (TI 14-pin JTAG Header): Pin 1: TMS (Test Mode Select) Pin 2: nTRST (Test Reset) Pin 3: TDI (Test Data In) Pin 4: TDIS (Test Disconnect) Pin 5: VTRef (Voltage Reference) Pin 6: KEY (No Connection) Pin 7: TDO (Test Data Out) Pin 8: GND (Ground) Pin 9: RTCK (Return Test Clock) Pin 10: GND (Ground) Pin 11: TCK (Test Clock) Pin 12: GND (Ground) Pin 13: EMU0 (Emulation Pin 0) Pin 14: EMU1 (Emulation Pin 1) \u003c\/code\u003e\u003c\/pre\u003e\n\u003ch3\u003eDevelopment Environment Integration\u003c\/h3\u003e \u003cp\u003eThe SAU100-USB integrates directly with Code Composer Studio through standard XDS drivers, eliminating complex setup procedures. USB bus-powered operation requires no external power supply, whilst the compact form factor minimises desk space requirements. LED status indicators provide immediate visual feedback on connection status and emulation activity.\u003c\/p\u003e\n\u003cdiv class=\"spec-note\"\u003e \u003cstrong\u003eVoltage Compatibility:\u003c\/strong\u003e Supports target systems operating at 1.8V to 3.3V logic levels with automatic voltage detection and adjustment. \u003c\/div\u003e\n\u003ch3\u003eReady-to-Run Code Example\u003c\/h3\u003e \u003cpre\u003e\u003ccode\u003e \/\/ Basic CCS connection verification #include \"DSP28x_Project.h\"\nvoid main(void) {\nInitSysCtrl(); \/\/ Initialize system con\nrol InitGpio(); \/\/ Initial\nze GPIO DINT; \/\/ Disable globa\ninterrupts InitPieCtrl(); \/\/ Initia\nize PIE control IER = 0x0000; \/\/ Di\nable CPU interrupts IFR = 0x0000;\nData format:\n\ntext\n\/\/ Enable JTAG debug mode\nSysCtrlRegs.PCLKCR0.bit.TBCLKSYNC = 0;\nEINT;                  \/\/ Enable global interrupts\n\nwhile(1) {\n    \/\/ Debug breakpoint location\n    asm(\" NOP\");       \/\/ Set breakpoint here\n}\n}\n\u003c\/code\u003e\u003c\/pre\u003e\n\n\u003cdiv class=\"aside\"\u003e For optimal debugging performance, ensure target board ground connections are solid and keep JTAG cable length under 15cm to minimise signal integrity issues. \u003c\/div\u003e \u003c\/section\u003e","brand":"Sauris GmbH","offers":[{"title":"Default Title","offer_id":37768316027069,"sku":"SAU100-USB","price":44.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/sauris-gmbh-emulator-sau100-usb-v1-jtag-emulator-23152120823997.jpg?v=1685125550"},{"product_id":"tag-connect-tc2030-clip-retainer","title":"Tag-Connect TC2030-CLIP Retainer","description":"\u003cp\u003eThis product is intended to temporarily hold a TC2030 -NL (\"No Legs\") cable in place on a PCB. This solution will help when board space is at a premium and you need a hands free solution for debugging.\u003c\/p\u003e\u003cp\u003eWe recommend keeping a few spare of these since the tiny boards are easy to misplace when working on the bench.\u003cbr\u003eFor a more robust solution consider a TC2030 legged cable.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"One (TC2030-CLIP)","offer_id":55778047820151,"sku":"TC2030-CLIP","price":9.5,"currency_code":"GBP","in_stock":true},{"title":"Pack of Three (TC2030-CLIP-3PACK)","offer_id":55778047852919,"sku":"TC2030-CLIP-3PACK","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/tag-connect-llc-cable-tag-connect-tc2030-clip-retainer-30220420972733.jpg?v=1685202596"},{"product_id":"tag-connect-tc2030-ctx-cable-uk","title":"Tag-Connect TC2030-CTX 6-Pin Cable for Arm Cortex SWD (Legged or No Legs)","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003eSWD From a 10-Pin Cortex Debug Probe to Six Pads on Your PCB\u003c\/h3\u003e\n\u003cp\u003eThe Tag-Connect TC2030-CTX connects an Arm Cortex debugger with the 10-pin 0.05 in Cortex Debug header to a 6-pad TC2030 footprint on your PCB, with no connector fitted to the board. The ribbon connector at the tool end mates with the FTSH-105 style micro-header used on the Keil ULINK2 and other Cortex debug probes. The cable carries SWD with SWO and nRESET.\u003c\/p\u003e\n\u003ch4\u003eOptions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eChoice\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eFour legs latch into holes in the PCB; footprint 0.09 sq in\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNo latch holes; footprint 0.02 sq in; hold by hand, with a \u003ca href=\"\/products\/tag-connect-tc2030-clip-retainer\"\u003eTC2030-CLIP\u003c\/a\u003e or in a fixture\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSqueeze\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eRegular-tension squeeze tabs on the Legged head; holds through long debug sessions\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSqueeze\u003c\/td\u003e\n\u003ctd\u003eSoft Squeeze\u003c\/td\u003e\n\u003ctd\u003eSofter tabs for frequent production programming; Legged only, not suited to debugging\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRibbon\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003e10-pin connector wired to the standard Cortex Debug pinout\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRibbon\u003c\/td\u003e\n\u003ctd\u003eLEMTA (for Atmel-ICE)\u003c\/td\u003e\n\u003ctd\u003e10-pin connector fitted reversed to suit the Microchip Atmel-ICE, whose header numbering is reversed\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003ePin Assignment\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eTC2030 Pad\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003e10-Pin Cortex Debug Connector Pin\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVCC\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO \/ TMS\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK \/ TCK\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e3, 5 and 9 (GNDDetect)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO \/ TDO\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eConnector pins 7 (RTCK) and 8 (TDI) are not connected, so the cable carries SWD, not full 4-wire JTAG.\u003c\/p\u003e\n\u003cp\u003ePinout, footprint and wiring diagram: \u003ca href=\"\/blogs\/tech-tips\/tc2030-ctx-pinout\"\u003eTC2030-CTX pinout\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003cp\u003e\u003cstrong\u003ePCB footprint:\u003c\/strong\u003e the TC2030-CTX uses the same footprints as the \u003ca href=\"\/products\/tag-connect-tc2030-idc-cable\"\u003eTC2030-IDC\u003c\/a\u003e (Legged) and TC2030-IDC-NL (No Legs). No solder paste on the contact pads. Tag-Connect says the No Legs footprint saves over 66% of the board space of a typical FTSH-105 10-pin micro-header. The footprint drawings are in the TC2030-IDC and TC2030-IDC-NL datasheets under Downloads. See also our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eSpring-Pin Contacts\u003c\/h4\u003e\n\u003cp\u003eEach cable has six spring pins. Tag-Connect's cycle testing shows them lasting well over 100,000 connections. On the Legged version the legs hold the plug on the board during programming or debugging, so no fixture or hand pressure is needed.\u003c\/p\u003e\n\u003cdiv class=\"callout\"\u003e \u003cp\u003e\u003cstrong\u003eAtmel-ICE users:\u003c\/strong\u003e the Atmel-ICE's 10-pin header numbering is reversed relative to the standard Cortex Debug header. Order the LEMTA ribbon, which has the connector fitted reversed. Tag-Connect warns that a standard Cortex cable plugged into an Atmel-ICE will short out power and other signals.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cp\u003eEngineers who program or debug Arm Cortex-M boards over SWD through a 6-pad TC2030 footprint, from a probe with the 10-pin 0.05 in Cortex Debug connector.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevice Family\u003c\/th\u003e\n\u003cth\u003eDebugger or Programmer\u003c\/th\u003e\n\u003cth\u003eRibbon\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eArm Cortex devices with SWD\u003c\/td\u003e\n\u003ctd\u003eKeil ULINK2, and other probes with the 10-pin Cortex Debug (MIPI-10) connector\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eInfineon (Cypress) PSoC 4, PSoC 5LP and PSoC 6, and Cypress Arm MCUs, SWD\u003c\/td\u003e\n\u003ctd\u003eCypress MiniProg3, MiniProg4\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMicrochip SAM (Arm Cortex), SWD\u003c\/td\u003e\n\u003ctd\u003eMicrochip Atmel-ICE, SAM port\u003c\/td\u003e\n\u003ctd\u003eLEMTA\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003eLimitations\u003c\/h4\u003e\n\u003cp\u003eNot the right cable for an ST-LINK\/V3 (use the \u003ca href=\"\/products\/tag-connect-tc2030-ctx-st14-cable\"\u003eTC2030-CTX-STDC14\u003c\/a\u003e or \u003ca href=\"\/products\/tag-connect-tc2030-ctx-nl-st14-stm32-swd-programming-cable\"\u003eTC2030-CTX-NL-STDC14\u003c\/a\u003e), a probe with the 20-pin 0.05 in Cortex header such as the IAR I-jet or Keil ULINKpro (use the \u003ca href=\"\/products\/tag-connect-tc2030-ctx-20-arm-cortex-debug-cable-swd-programming\"\u003eTC2030-CTX-20\u003c\/a\u003e), a SEGGER J-Link with the 20-pin 0.1 in ARM header (use the \u003ca href=\"\/products\/tag-connect-tc2030-idc-cable\"\u003eTC2030-IDC\u003c\/a\u003e with the \u003ca href=\"\/products\/tag-connect-arm20-ctx-20-pin-to-tc2030-idc-adapter-uk\"\u003eARM20-CTX\u003c\/a\u003e adapter), 4-wire JTAG (use the 10-pin \u003ca href=\"\/products\/tag-connect-tc2050-idc-050-all-cable-uk\"\u003eTC2050-IDC-050-ALL\u003c\/a\u003e), or ETM trace (use the \u003ca href=\"\/products\/tag-connect-tc2030-ctx-etm-cortex-trace-cable-uk\"\u003eTC2030-CTX-ETM\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch4\u003eCompare the Versions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eSqueeze\u003c\/th\u003e\n\u003cth\u003eRibbon\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-CTX\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging: clips in and stays connected hands-free\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-CTX-NL\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNone (no tabs)\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eProduction programming, or debugging with a TC2030-CLIP; smallest footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-CTX-SOFT\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eSoft Squeeze\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eFrequent production programming on a legged footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-CTX-LEMTA\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eLEMTA\u003c\/td\u003e\n\u003ctd\u003eAtmel-ICE: development and debugging\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-CTX-NL-LEMTA\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNone (no tabs)\u003c\/td\u003e\n\u003ctd\u003eLEMTA\u003c\/td\u003e\n\u003ctd\u003eAtmel-ICE: production programming, or debugging with a TC2030-CLIP\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-CTX-SOFT-LEMTA\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eSoft Squeeze\u003c\/td\u003e\n\u003ctd\u003eLEMTA\u003c\/td\u003e\n\u003ctd\u003eAtmel-ICE: frequent production programming on a legged footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eAll six versions use the same six-pad contact pattern and the same wiring; only the head, the squeeze tabs and the ribbon connector orientation differ.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n","brand":"Tag-Connect, LLC","offers":[{"title":"Legged \/ Standard tabs \/ Standard","offer_id":55790062928247,"sku":"TC2030-CTX","price":46.75,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ Standard tabs \/ Standard","offer_id":55790062961015,"sku":"TC2030-CTX-NL","price":46.75,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Standard tabs \/ LEMTA (for Atmel-ICE)","offer_id":57509682053495,"sku":"TC2030-CTX-LEMTA","price":46.75,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ Standard tabs \/ LEMTA (for Atmel-ICE)","offer_id":57509682086263,"sku":"TC2030-CTX-NL-LEMTA","price":46.75,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Soft Squeeze \/ Standard","offer_id":57730595193207,"sku":"TC2030-CTX-SOFT","price":53.77,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Soft Squeeze \/ LEMTA (for Atmel-ICE)","offer_id":57730595225975,"sku":"TC2030-CTX-SOFT-LEMTA","price":53.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2030-ctx-tag-connect-tc2030-ctx-cortex-pogo-pin-cable-71069919871351.png?v=1729993961"},{"product_id":"tag-connect-tc2030-mcp-cable-uk","title":"Tag-Connect TC2030-MCP 6-Pin Cable with RJ12 for Microchip ICD","description":"\u003cp\u003eOne listing for every TC2030-MCP cable. Pick the head, the squeeze tabs and the length above; the price, SKU and stock follow your choice. All versions connect a Microchip ICD programmer or debugger with an RJ12 socket to the 6-pin TC2030 footprint on your board, with no connector fitted to the PCB.\u003c\/p\u003e\n\u003ch2\u003eWhich Version?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eSqueeze tabs\u003c\/th\u003e\n\u003cth\u003eOverall length\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTC2030-MCP\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003e228 mm (9 in)\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging; also production programming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTC2030-MCP-10\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003e297 mm (11.7 in)\u003c\/td\u003e\n\u003ctd\u003eAs TC2030-MCP, when the board sits further from the ICD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTC2030-MCP-SOFT\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eSoft\u003c\/td\u003e\n\u003ctd\u003e228 mm (9 in)\u003c\/td\u003e\n\u003ctd\u003eFrequent production programming; not for debugging or humid environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTC2030-MCP-NL\u003c\/td\u003e\n\u003ctd\u003eNo legs\u003c\/td\u003e\n\u003ctd\u003eNot applicable (no legs to release)\u003c\/td\u003e\n\u003ctd\u003e225 mm (8.9 in)\u003c\/td\u003e\n\u003ctd\u003eProduction programming with brief connections, board to board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTC2030-MCP-NL-10\u003c\/td\u003e\n\u003ctd\u003eNo legs\u003c\/td\u003e\n\u003ctd\u003eNot applicable (no legs to release)\u003c\/td\u003e\n\u003ctd\u003e297 mm (11.7 in)\u003c\/td\u003e\n\u003ctd\u003eAs TC2030-MCP-NL, with a longer reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 297 mm versions use a 10 in (254 mm) cable. That is longer than the 8 in maximum cable length Microchip specifies, so Microchip does not support it, although Tag-Connect says it has not been known to cause problems in general use.\u003c\/p\u003e\n\u003cp\u003eLegged and No Legs cables use the same contact pattern, so a board laid out for the legged footprint takes either cable: legged for development, No Legs on the production line. A No Legs cable can be held in place with a \u003ca href=\"\/products\/tag-connect-tc2030-clip-retainer\"\u003eTC2030-CLIP retaining clip\u003c\/a\u003e or a \u003ca href=\"\/products\/tag-connect-tc2030-mount\"\u003eTC-MOUNT-6 fixture\u003c\/a\u003e, both offered as add-ons above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget end\u003c\/td\u003e\n\u003ctd\u003eTC2030 6-pin Plug-of-Nails with spring-loaded pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool end\u003c\/td\u003e\n\u003ctd\u003eRJ12 modular plug for Microchip ICD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003ePIC ICD \/ ICSP (MCLR\/Vpp, Vdd, GND, PGD, PGC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall length, RJ12 plug to head tip\u003c\/td\u003e\n\u003ctd\u003eStandard: 228 mm (9 in) legged, 225 mm (8.9 in) No Legs. Long: 297 mm (11.7 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetention (legged)\u003c\/td\u003e\n\u003ctd\u003eFour plastic legs clip into locating holes in the board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCB footprint\u003c\/td\u003e\n\u003ctd\u003eLegged: TC2030-MCP-FP. No Legs: TC2030-MCP-NL-FP, which also fits the legged footprint. No component is fitted; list it as DNL in your BOM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eTC2030 pin\u003c\/th\u003e\n\u003cth\u003eRJ12 pin\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCLR \/ Vpp\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVdd\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePGD (ICSPDAT)\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePGC (ICSPCLK)\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNC \/ LVP\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatible Tools\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMicrochip MPLAB ICD 3 and ICD 4: plugs straight in.\u003c\/li\u003e\n\u003cli\u003eCCS programmers: plugs straight in.\u003c\/li\u003e\n\u003cli\u003eMicrochip PICkit 3 and PICkit 4: need Microchip adapter AC164110 (not included). For PICkit 3, 4 and 5 without an adapter, use a \u003ca href=\"\/products\/tag-connect-tc2030-pkt-programming-cable\"\u003eTC2030-PKT cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMicrochip MPLAB PM3: needs Microchip adapter AC164111 (not included).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePCB Layout Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLeave the contact pads free of solder paste.\u003c\/li\u003e\n\u003cli\u003eKeep tracks and vias out of the shaded keep-out area.\u003c\/li\u003e\n\u003cli\u003eKeep tracks and other signals at least 0.02 in (0.5 mm) from any contact pad.\u003c\/li\u003e\n\u003cli\u003eAllow finger room on the two squeeze-tab sides of a legged footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFull footprint dimensions for both heads are in Tag-Connect's drawings under Downloads. Which cable fits your programmer? See our \u003ca href=\"\/collections\/microchip-pic-tag-connect-cables-catalogue\"\u003eMicrochip PIC Tag-Connect cables\u003c\/a\u003e, all \u003ca href=\"\/collections\/6-pin-tag-connect-cables-tc2030-catalogue\"\u003e6-pin Tag-Connect cables\u003c\/a\u003e, or the \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which head or length suits your board or fixture? \u003ca href=\"\/pages\/contact-us\"\u003eAsk our engineers\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Tag-Connect, LLC","offers":[{"title":"Legged \/ Standard tabs \/ 9 in","offer_id":37768316289213,"sku":"TC2030-MCP","price":42.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ Standard tabs \/ 9 in","offer_id":57727689654647,"sku":"TC2030-MCP-NL","price":38.0,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Standard tabs \/ 11.7 in","offer_id":57727689687415,"sku":"TC2030-MCP-10","price":45.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ Standard tabs \/ 11.7 in","offer_id":57727689720183,"sku":"TC2030-MCP-NL-10","price":44.0,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Soft Squeeze \/ 9 in","offer_id":57727689752951,"sku":"TC2030-MCP-SOFT","price":54.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tc2030-mcp-legged-transparent.png?v=1794237618"},{"product_id":"tag-connect-tc2050-idc-cable-uk","title":"Tag-Connect TC2050-IDC 10-Pin Plug-of-Nails IDC Cable (Legged, No Legs or Long Legs)","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003e10-Pin Plug-of-Nails Cable with a 0.1 in IDC Connector\u003c\/h3\u003e\n\u003cp\u003eThe ribbon is 10-conductor, so the signals you get depend on the tool or adapter at the other end, typically JTAG or SWD.\u003c\/p\u003e\n\u003ch4\u003eOptions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eChoice\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eFour legs latch into holes in the PCB, so the cable holds itself in place\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNo leg holes; footprint about 0.03 sq in; hold by hand, with a \u003ca href=\"\/products\/tag-connect-tc2050-clip-uk\"\u003eTC2050-CLIP\u003c\/a\u003e or in a fixture\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLong Legs\u003c\/td\u003e\n\u003ctd\u003eLonger alignment pins and legs for PCBs over 1.6 mm and up to 3.2 mm thick (TC2050-IDC-LONGLEGS)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSqueeze\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eRegular-tension squeeze tabs on the legged head; holds through long debug sessions\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSqueeze\u003c\/td\u003e\n\u003ctd\u003eSoft Squeeze\u003c\/td\u003e\n\u003ctd\u003eSofter tabs for frequent production programming; Legged, female only; not suited to debugging (TC2050-IDC-SOFT)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003ctd\u003eStandard 2x5 0.1 in female ribbon socket, plugs onto a 10-pin 0.1 in header on the debugger or an adapter\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eMale\u003c\/td\u003e\n\u003ctd\u003e2x5 0.1 in male ribbon plug, only for debuggers whose own cable cannot be removed and must be extended, such as some Intel (Altera) USB Blaster and ByteBlaster units\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eOverall length on Tag-Connect's drawings, from the IDC connector end to the pin tips: 8 in (203.2 mm) for the Legged and No Legs versions. Tag-Connect publishes no drawing for the Soft Squeeze or Long Legs versions.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003cp\u003e\u003cstrong\u003ePCB footprint:\u003c\/strong\u003e ten contact pads at 0.05 in pitch with three alignment holes; the Legged footprint adds four leg latch holes. No solder paste on the contact pads. On the Legged footprint, allow finger access to the squeeze tabs from both sides. See the datasheets under Downloads and our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eSpring-Pin Contacts\u003c\/h4\u003e\n\u003cp\u003eTag-Connect quotes over 100,000 operations for the spring pins. On the Legged and Long Legs versions the legs hold the plug on the board during programming or debugging, so no fixture or hand pressure is needed.\u003c\/p\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cp\u003eEngineers who program, debug or test boards over a 10-pin interface through a TC2050 footprint, usually JTAG or SWD.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevice Family\u003c\/th\u003e\n\u003cth\u003eDebugger or Programmer\u003c\/th\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eArm Cortex (STM32, NXP and others), JTAG or SWD\u003c\/td\u003e\n\u003ctd\u003eSEGGER J-Link, ST-LINK\/V2, STLINK-V3SET, PEmicro Multilink ACP and Cyclone ARM\u003c\/td\u003e\n\u003ctd\u003eFemale, with the \u003ca href=\"\/products\/tag-connect-tc2050-arm2010-adapter-uk\"\u003eTC2050-ARM2010\u003c\/a\u003e adapter for 20-pin 0.1 in ARM headers\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eIntel (Altera) FPGA and CPLD, JTAG\u003c\/td\u003e\n\u003ctd\u003eIntel USB Blaster, ByteBlaster\u003c\/td\u003e\n\u003ctd\u003eFemale on the 10-pin target connector; Male where the Blaster's own cable cannot be removed\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eXilinx FPGA, JTAG\u003c\/td\u003e\n\u003ctd\u003eXilinx Platform Cable\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/tc2050-xilinx-adapter-tag-connect-uk\"\u003eTC2050-XILINX\u003c\/a\u003e adapter, which plugs onto the Platform Cable's 14-pin 2 mm header\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eXilinx FPGA, JTAG\u003c\/td\u003e\n\u003ctd\u003eDigilent JTAG-HS2, JTAG-HS3\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/tc2050-xilinx-adapter-tag-connect-uk\"\u003eTC2050-XILINX-M\u003c\/a\u003e adapter, which plugs into the tool's female 14-pin 2 mm header\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eLattice FPGA, JTAG\u003c\/td\u003e\n\u003ctd\u003eLattice HW-USBN-2B\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/tag-connect-tc-lattice-10-adapter-uk\"\u003eTC-LATTICE-10\u003c\/a\u003e adapter\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRenesas MCUs, JTAG or FINE\u003c\/td\u003e\n\u003ctd\u003eRenesas E1, E2, E8a, E20\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/tag-connect-tc-renesas-adapter-uk\"\u003eTC-RENESAS\u003c\/a\u003e adapter\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSilicon Labs 8-bit MCUs, C2 or JTAG\u003c\/td\u003e\n\u003ctd\u003eSilicon Labs USB Debug Adapter\u003c\/td\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMulti-vendor boundary scan (Intel, Xilinx, Lattice, Microchip)\u003c\/td\u003e\n\u003ctd\u003eXJTAG\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/tag-connect-tc2050-2x10-adapter-uk\"\u003eTC2050-2X10\u003c\/a\u003e adapter, which takes two TC2050-IDC cables\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTI C2000 DSPs, JTAG\u003c\/td\u003e\n\u003ctd\u003eTI XDS100v2\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/tag-connect-tc-c2000-m-adapter-uk\"\u003eTC-C2000-M\u003c\/a\u003e adapter\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003ePEmicro Multilink Universal and FX, and Cyclone Universal, have a 0.05 in MINI-10 port: use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-050-all-cable-uk\"\u003eTC2050-IDC-050-ALL\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eWhen to Choose a Different Cable\u003c\/h4\u003e\n\u003cp\u003eNot the right cable for a TI MSP430 FET (use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-430-msp430-programming-cables\"\u003eTC2050-IDC-430\u003c\/a\u003e) or a probe with a 10-pin or 20-pin 0.05 in Cortex header (see the TC2050-IDC-050 family in our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch4\u003eCompare the Versions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eSqueeze\u003c\/th\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging: clips in and stays connected hands-free\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-M\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eMale\u003c\/td\u003e\n\u003ctd\u003eExtending a debugger cable that cannot be removed\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-NL\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNone (no tabs)\u003c\/td\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003ctd\u003eProduction programming, or debugging with a TC2050-CLIP; smallest footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-NL-M\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNone (no tabs)\u003c\/td\u003e\n\u003ctd\u003eMale\u003c\/td\u003e\n\u003ctd\u003eNo Legs footprint with a debugger cable that cannot be removed\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-SOFT\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eSoft Squeeze\u003c\/td\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003ctd\u003eFrequent production programming on a legged footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-LONGLEGS\u003c\/td\u003e\n\u003ctd\u003eLong Legs\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003ctd\u003eLegged connection on PCBs over 1.6 mm and up to 3.2 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eAll six versions use the same ten-pad contact pattern; the head, squeeze tabs and connector gender differ.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n","brand":"Tag-Connect, LLC","offers":[{"title":"Legged \/ Standard tabs \/ Female","offer_id":42773788852447,"sku":"TC2050-IDC","price":50.0,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Standard tabs \/ Male","offer_id":42773788885215,"sku":"TC2050-IDC-M","price":60.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ Standard tabs \/ Female","offer_id":57730609840503,"sku":"TC2050-IDC-NL","price":50.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ Standard tabs \/ Male","offer_id":57730609873271,"sku":"TC2050-IDC-NL-M","price":60.0,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Soft Squeeze \/ Female","offer_id":57730609906039,"sku":"TC2050-IDC-SOFT","price":58.5,"currency_code":"GBP","in_stock":true},{"title":"Long Legs \/ Standard tabs \/ Female","offer_id":57730609938807,"sku":"TC2050-IDC-LONGLEGS","price":100.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2050-idc-tag-connect-tc2050-idc-cable-71069953294711.png?v=1729993793"},{"product_id":"tag-connect-tc2050-idc-430-msp430-programming-cables","title":"Tag-Connect TC2050-IDC-430 10-Pin Debug Cable for MSP430","description":"\u003csection class=\"product-rich\"\u003e \u003ch3\u003eMSP430 Programming Made Simple\u003c\/h3\u003e \u003cp\u003eThe Tag Connect TC2050-IDC-430 series revolutionises MSP430 microcontroller programming by eliminating traditional programming headers whilst maintaining reliable JTAG connections. Available in both legged (TC2050-IDC-430) and no-legs (TC2050-IDC-NL-430) variants, these cables connect directly to TI's MSP-FET430 debugger and are compatible with all MSP430 MCU families.\u003c\/p\u003e \u003ch4\u003eSpring-Pin Technology\u003c\/h4\u003e \u003cp\u003eEach cable features high-reliability spring-pins rated for over 100,000 operations, ensuring consistent electrical contact throughout the development lifecycle. The \u003cspan class=\"spec-note\"\u003e10-conductor design\u003c\/span\u003e terminates in a standard 14-pin ribbon connector specifically wired for MSP-FET430 debuggers.\u003c\/p\u003e \u003ch4\u003eFootprint Options\u003c\/h4\u003e \u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eFootprint Size\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-430\u003c\/td\u003e\n\u003ctd\u003e~2-3 SMT resistors\u003c\/td\u003e\n\u003ctd\u003eDevelopment \u0026amp; debugging\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-NL-430\u003c\/td\u003e\n\u003ctd\u003e0.03 square inches\u003c\/td\u003e\n\u003ctd\u003eProduction programming\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003ch4\u003eWiring Quick-Start\u003c\/h4\u003e \u003cp\u003eConnection is straightforward: the 14-pin connector plugs directly into the MSP-FET430 target port, whilst the Tag-Connect end aligns with PCB pads using three guide pins. The \u003cspan class=\"kbd\"\u003ered stripe\u003c\/span\u003e on the ribbon cable indicates pin 1 for proper orientation.\u003c\/p\u003e \u003cdiv class=\"imgph\"\u003eMSP430 FET430 connection diagram\u003c\/div\u003e \u003ch4\u003ePinout Reference\u003c\/h4\u003e \u003cpre\u003e\u003ccode\u003eTC2050 Pin MSP-FET430 Pin Function 1 1 VCC 2 2 TDI 3 3 TDO 4 4 TMS 5 5 TCK 6 6 VCC 7 7 GND 8 8 GND 9 9 RST\/NMI 10 11 TEST \u003c\/code\u003e\u003c\/pre\u003e \u003cdiv class=\"aside\"\u003e \u003cstrong\u003eCompatibility Note:\u003c\/strong\u003e The TC2050-IDC-NL-430 (no-legs) variant is compatible with both legged and no-legs footprints, providing flexibility for different development stages. \u003c\/div\u003e \u003ch4\u003eProduction Benefits\u003c\/h4\u003e \u003cp\u003eEliminating programming headers reduces BOM costs to zero per board whilst freeing valuable PCB real estate. The flat footprint (no height) allows component placement on both sides of the board, maximising design efficiency.\u003c\/p\u003e \u003c\/section\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Legged (TC2050-IDC-430)","offer_id":55815249166711,"sku":"TC2050-IDC-430","price":52.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs (TC2050-IDC-NL-430)","offer_id":55815249199479,"sku":"TC2050-IDC-NL-430","price":52.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2050-idc-430-tag-connect-tc2050-idc-430-legged-cable-tc2050-idc-430-msp430-fet430-programming-cable-71069972791671.png?v=1729993613"},{"product_id":"tag-connect-tc2050-minihdmi-legged-cable","title":"Tag-Connect TC2050-MINIHDMI Cable for Altium USB JTAG (Discontinued)","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003eDiscontinued: Remaining Stock Only\u003c\/h3\u003e\n\u003cp\u003eThe TC2050-MINIHDMI is a 10-pin TC2050 Plug-of-Nails cable with a Mini HDMI connector for Altium's USB JTAG adapter. Tag-Connect has discontinued it because Altium no longer makes that adapter. Our remaining stock is the Legged version only, and once it has sold this page will close.\u003c\/p\u003e\n\u003ch4\u003eReplacement\u003c\/h4\u003e\n\u003cp\u003eFor new designs, Tag-Connect recommends its standard \u003ca href=\"\/products\/tag-connect-tc2050-idc-cable-uk\"\u003eTC2050-IDC\u003c\/a\u003e cable (Legged, No Legs or Long Legs), used with one of Altium's adapters. It uses the same 10-pin TC2050 footprint, so a board laid out for this cable takes the TC2050-IDC without changes.\u003c\/p\u003e\n\u003cp\u003eCable only. No debugger, adapter or demo board is included.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Legged","offer_id":37768316944573,"sku":"TC2050-MINIHDMI","price":52.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs","offer_id":57730935062903,"sku":"TC2050-MINIHDMI-NL","price":52.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2050-minihdmi-tag-connect-tc2050-minihdmi-legged-cable-72351321293175.png?v=1732671465"},{"product_id":"tag-connect-tc2030-ctx-20-arm-cortex-debug-cable-swd-programming","title":"Tag-Connect TC2030-CTX-20 6-Pin to 20-Pin Arm Cortex Debug Cable","description":"\u003cp\u003e\u003cstrong\u003ePinout, footprint and wiring diagram:\u003c\/strong\u003e \u003ca href=\"\/blogs\/tech-tips\/tc2030-ctx-20-pinout\"\u003eTC2030-CTX-20 pinout\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis Cortex programming cable is the same as the TC2030-CTX cable except it has a 0.05″ (1.27mm) pitch 20-pin connector compatible with i-Jet and ULINK pro. \u003c\/p\u003e\u003cp\u003enote: This won't fit the traditional 20-pin 0.1″ connector such as found on the standard J-Link debuggers).\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Legged (TC2030-CTX-20)","offer_id":55790036844919,"sku":"TC2030-CTX-20","price":56.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs (TC2030-CTX-20-NL)","offer_id":55790036877687,"sku":"TC2030-CTX-20-NL","price":56.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2030-ctx-20-tag-connect-tc2030-ctx-20-6-pin-cable-72351848923511.png?v=1732671645"},{"product_id":"tag-connect-tc2030-idc-cable","title":"Tag-Connect TC2030-IDC 6-Pin Plug-of-Nails Cable","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003e6-Pin Plug-of-Nails Cable with a 0.1 in IDC Connector, Legged or No Legs\u003c\/h3\u003e\n\u003cp\u003eThe Tag-Connect TC2030-IDC connects a debugger or programmer with a 6-pin 0.1 in IDC header to a 6-pad TC2030 footprint on your PCB, with no connector fitted to the board. The Legged version clips into the footprint so the cable stays in place while you work. The No Legs version needs a smaller footprint and is held by hand, with a clip or in a fixture.\u003c\/p\u003e\n\u003ch4\u003eOptions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eChoice\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eFour legs latch into holes in the PCB; footprint 0.09 sq in\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNo latch holes; footprint 0.02 sq in; hold by hand, with a \u003ca href=\"\/products\/tag-connect-tc2030-clip-retainer\"\u003eTC2030-CLIP\u003c\/a\u003e or in a fixture\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e225 mm\u003c\/td\u003e\n\u003ctd\u003e225 mm (8.8 in) overall, IDC connector to head (TC2030-IDC, TC2030-IDC-NL)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e265 mm\u003c\/td\u003e\n\u003ctd\u003e265 mm overall; sold by Tag-Connect as the 10 in version (TC2030-IDC-10, TC2030-IDC-NL-10)\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eWe suggest the shortest length that reaches, especially for high-speed signals.\u003c\/p\u003e\n\u003ch4\u003ePin Assignment\u003c\/h4\u003e\n\u003cp\u003eThe cable is wired straight through: TC2030 pad n goes to IDC pin n. The signal on each pin depends on the convention you use:\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePad and IDC Pin\u003c\/th\u003e\n\u003cth\u003eARM SWD (Tag-Connect convention, as on the ARM20-CTX adapter)\u003c\/th\u003e\n\u003cth\u003eAVR ISP (standard 6-pin ISP header)\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVCC (VTref)\u003c\/td\u003e\n\u003ctd\u003eMISO\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO\u003c\/td\u003e\n\u003ctd\u003eVCC\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003ctd\u003eSCK\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK\u003c\/td\u003e\n\u003ctd\u003eMOSI\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eRESET\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cdiv class=\"aside\"\u003e \u003cp\u003e\u003cstrong\u003ePCB footprint:\u003c\/strong\u003e no solder paste on the contact pads. The legged footprint adds four latch holes for the legs; see the datasheets under Downloads and our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eSpring-Pin Contacts\u003c\/h4\u003e\n\u003cp\u003eEach cable has six spring pins. Tag-Connect's cycle testing shows them lasting well over 100,000 connections. On the Legged version the legs hold the plug on the board during programming or debugging, so no fixture or hand pressure is needed.\u003c\/p\u003e\n\u003cdiv class=\"callout\"\u003e \u003cp\u003e\u003cstrong\u003eDebugger compatibility:\u003c\/strong\u003e plugs into tools with a 6-pin 0.1 in IDC header. For a SEGGER J-Link or ST-LINK\/V2 with the 20-pin ARM header, add the \u003ca href=\"\/products\/tag-connect-arm20-ctx-20-pin-to-tc2030-idc-adapter-uk\"\u003eARM20-CTX\u003c\/a\u003e adapter. The ARM20-CTX carries SWD only; it does not carry full JTAG. For the Microchip Atmel-ICE AVR port, use the \u003ca href=\"\/products\/tag-connect-tc2030-icespi-lemta-avr-cable\"\u003eTC2030-ICESPI\u003c\/a\u003e (or TC2030-ICESPI-NL) instead, ordered in the LEMTA orientation, which reverses the ribbon connector to suit the Atmel-ICE.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cp\u003eEngineers who program or debug boards through a 6-pad TC2030 footprint from a tool with a 6-pin 0.1 in connection, either directly or through a Tag-Connect adapter. Tag-Connect also lists Zilog devices among this cable's uses.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevice Family\u003c\/th\u003e\n\u003cth\u003eDebugger or Programmer\u003c\/th\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eARM Cortex-M (STM32, NXP and others), SWD\u003c\/td\u003e\n\u003ctd\u003eSEGGER J-Link, ST-LINK\/V2, STLINK-V3SET\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/tag-connect-arm20-ctx-20-pin-to-tc2030-idc-adapter-uk\"\u003eARM20-CTX\u003c\/a\u003e adapter (SWD only)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eAtmel AVR, ISP\u003c\/td\u003e\n\u003ctd\u003eAtmel AVRISP mkII\u003c\/td\u003e\n\u003ctd\u003eDirect, on the AVRISP mkII's internal 6-pin header in place of its own ribbon cable\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRenesas MCUs with a 6-pin debug interface (check your device: some need the 10-pin \u003ca href=\"\/products\/tag-connect-tc2050-idc-cable-uk\"\u003eTC2050-IDC\u003c\/a\u003e)\u003c\/td\u003e\n\u003ctd\u003eRenesas E1, E8a\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/tag-connect-tc-renesas-adapter-uk\"\u003eTC-Renesas\u003c\/a\u003e adapter (also suits E2, E2 Lite and E20)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eXilinx FPGA, JTAG\u003c\/td\u003e\n\u003ctd\u003eXilinx Platform Cable USB II\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/tag-connect-tc-xilinx6-adapter-uk\"\u003eTC-XILINX6\u003c\/a\u003e adapter\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eLattice FPGA, JTAG\u003c\/td\u003e\n\u003ctd\u003eLattice HW-USBN-2B\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/tag-connect-tc-lattice-adapter-hw-usbn-2b-tc-lattice\"\u003eTC-LATTICE\u003c\/a\u003e adapter\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003eWhen to Choose a Different Cable\u003c\/h4\u003e\n\u003cp\u003eNot the right cable for a Microchip Atmel-ICE (use the \u003ca href=\"\/products\/tag-connect-tc2030-icespi-lemta-avr-cable\"\u003eTC2030-ICESPI\u003c\/a\u003e for its AVR port or the \u003ca href=\"\/products\/tag-connect-tc2030-ctx-cable-uk\"\u003eTC2030-CTX\u003c\/a\u003e for its SAM port) or a Microchip MPLAB ICD 3 or ICD 4 (use the \u003ca href=\"\/products\/tag-connect-tc2030-mcp-cable-uk\"\u003eTC2030-MCP\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch4\u003eCompare the Versions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-IDC\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003e225 mm (8.8 in)\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging: clips in and stays connected hands-free\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-IDC-NL\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003e225 mm (8.8 in)\u003c\/td\u003e\n\u003ctd\u003eProduction programming, or debugging with a TC2030-CLIP; smallest footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-IDC-10\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003e265 mm\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging when the board sits further from the tool\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-IDC-NL-10\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003e265 mm\u003c\/td\u003e\n\u003ctd\u003eProduction fixtures and test jigs that need the extra reach\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eAll four versions use the same six-pad contact pattern and the same straight-through wiring; only the head and the length differ.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Legged \/ 225 mm","offer_id":55804530524535,"sku":"TC2030-IDC","price":42.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ 225 mm","offer_id":55804530557303,"sku":"TC2030-IDC-NL","price":42.0,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ 265 mm","offer_id":57730342715767,"sku":"TC2030-IDC-10","price":42.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ 265 mm","offer_id":57730342748535,"sku":"TC2030-IDC-NL-10","price":42.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/tag-connect-llc-cable-tag-connect-tc2030-idc-cable-29821716988093.jpg?v=1685121763"},{"product_id":"tag-connect-tc2070-idc-cable-uk","title":"Tag-Connect TC2070-IDC 14-Pin Plug-of-Nails IDC Cable (Legged, No Legs or Soft Squeeze)","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003e14-Pin Plug-of-Nails Cable with a 0.1 in IDC Connector\u003c\/h3\u003e\n\u003cp\u003eEach pin of the 14-pin IDC socket connects to the footprint pad of the same number, so the signals are whatever your debugger puts on its 14-pin 0.1 in male header: usually JTAG, plus Spy-Bi-Wire on MSP430 tools.\u003c\/p\u003e\n\u003ch4\u003eOptions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eChoice\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eFour legs latch into holes in the PCB, so the cable holds itself in place\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNo leg holes, so a smaller footprint; hold by hand, with a \u003ca href=\"\/products\/tag-connect-three-pack-of-grip-14-retainers-uk\"\u003eGRIP-14\u003c\/a\u003e retainer for short holds, or build into a test fixture with a \u003ca href=\"\/products\/tag-connect-tc2070-mount\"\u003eTC-MOUNT-14\u003c\/a\u003e bracket\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSqueeze\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eRegular-tension squeeze tabs on the legged head; holds through long debug sessions\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSqueeze\u003c\/td\u003e\n\u003ctd\u003eSoft Squeeze\u003c\/td\u003e\n\u003ctd\u003eSofter tabs for frequent production programming; Legged only; not suited to debugging (TC2070-IDC-SOFT)\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eAll versions end in a 2x7 0.1 in female ribbon socket, with 8 in (203 mm) of ribbon cable between the socket and the Plug-of-Nails head, as dimensioned on Tag-Connect's Legged and No Legs drawings (the Soft Squeeze version uses the Legged drawing).\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003cp\u003e\u003cstrong\u003ePCB footprint:\u003c\/strong\u003e fourteen contact pads at 0.05 in pitch in two rows of seven, with three alignment holes; the Legged footprint adds four leg latch holes. No solder paste on the contact pads, no tracks or vias in the keep-out area, and no components taller than 1.0 mm under the connector. On the Legged footprint, allow finger access to the squeeze tabs from both sides. Name the footprint TC2070-FP (or TC2070-NL-FP) and mark it Do Not Install in your BOM so your assembler does not order a cable per board. See the datasheets under Downloads and our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eSpring-Pin Contacts\u003c\/h4\u003e\n\u003cp\u003eIn Tag-Connect's cycle testing, its spring pins last for well over 100,000 operations. On the Legged versions the legs hold the plug on the board during programming or debugging, so no fixture or hand pressure is needed.\u003c\/p\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cp\u003eEngineers who program, debug or test boards with a tool that has a 14-pin 0.1 in male header (pins, not a socket), and who want pads on the PCB instead of a fitted header.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevice Family\u003c\/th\u003e\n\u003cth\u003eDebugger or Programmer\u003c\/th\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTI MSP430 MCUs, JTAG, Spy-Bi-Wire or BSL\u003c\/td\u003e\n\u003ctd\u003eTI MSP-FET and MSP-FET430UIF\u003c\/td\u003e\n\u003ctd\u003ePlugs straight onto the FET's 14-pin JTAG connector, in place of TI's 14-conductor cable\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTI DSPs, JTAG\u003c\/td\u003e\n\u003ctd\u003eTI XDS emulators with a TI 14-pin 0.1 in JTAG cable\u003c\/td\u003e\n\u003ctd\u003eNot direct: the emulator cable ends in a female socket. Use the \u003ca href=\"\/products\/tag-connect-tc-c2000-m-adapter-uk\"\u003eTC-C2000-M\u003c\/a\u003e adapter with a TC2050-IDC cable on a 10-pin footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRenesas MCUs\u003c\/td\u003e\n\u003ctd\u003eRenesas E1 and E2 Lite (E2 and E20 through the 14-pin adapter supplied with the emulator)\u003c\/td\u003e\n\u003ctd\u003eNot direct: the 14-pin user interface cable ends in a female socket. Use the \u003ca href=\"\/products\/tag-connect-tc-renesas-adapter-uk\"\u003eTC-RENESAS\u003c\/a\u003e adapter with a TC2030-IDC or TC2050-IDC cable on a 6-pin or 10-pin footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eNXP MPC5xxx and DSC devices\u003c\/td\u003e\n\u003ctd\u003ePEmicro Multilink Universal and FX, Cyclone LC and FX Universal\u003c\/td\u003e\n\u003ctd\u003ePlugs onto the probe's 14-pin port in place of the supplied ribbon cable\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eMany of these tools can also reach a smaller 6-pin or 10-pin footprint through a Tag-Connect adapter or a dedicated cable, which saves board space and costs less per cable. For MSP430, the \u003ca href=\"\/products\/tag-connect-tc2050-idc-430-msp430-programming-cables\"\u003eTC2050-IDC-430\u003c\/a\u003e cable does this on a 10-pin footprint.\u003c\/p\u003e\n\u003ch4\u003eWhen to Choose a Different Cable\u003c\/h4\u003e\n\u003cp\u003eNot the right cable for the 14-pin 0.05 in STDC14 connector on an STLINK-V3 or similar probe (use the \u003ca href=\"\/products\/tag-connect-tc2070-idc-050-cable\"\u003eTC2070-IDC-050\u003c\/a\u003e) or a tool with a 14-pin 2 mm header (use the \u003ca href=\"\/products\/tag-connect-tc2070-idc-2mm-cable\"\u003eTC2070-IDC-2MM\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch4\u003eCompare the Versions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eSqueeze\u003c\/th\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2070-IDC\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003e0.1 in female\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging: clips in and stays connected hands-free\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2070-IDC-NL\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNone (no tabs)\u003c\/td\u003e\n\u003ctd\u003e0.1 in female\u003c\/td\u003e\n\u003ctd\u003eProduction programming by hand or in a test fixture; smaller footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2070-IDC-SOFT\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eSoft Squeeze\u003c\/td\u003e\n\u003ctd\u003e0.1 in female\u003c\/td\u003e\n\u003ctd\u003eFrequent production programming on a legged footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eAll three versions use the same fourteen-pad contact pattern; the head and squeeze tabs differ.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n","brand":"Tag-Connect, LLC","offers":[{"title":"Legged \/ Standard tabs","offer_id":55778268643703,"sku":"TC2070-IDC","price":52.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ Standard tabs","offer_id":55778268676471,"sku":"TC2070-IDC-NL","price":52.0,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Soft Squeeze","offer_id":57730924052855,"sku":"TC2070-IDC-SOFT","price":59.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/tag-connect-llc-cable-tag-connect-tc2070-idc-cable-29821049667773.jpg?v=1685133295"},{"product_id":"usb2demon-cop-interface-macraigor-systems-uk","title":"Macraigor U2D-COP USB2Demon USB to COP JTAG","description":"\u003cp\u003eThe Macraigor Systems usb2Demonis a mid-cost interface used in the design, debug, and programming of microprocessor based embedded systems.\u003c\/p\u003e\n\n\u003cp\u003eOne side of the usb2Demon interfaces to the USB port of a host IBM compatible PC and the other side connects to an OCD (On-Chip Debug) port of the target system. This port may be JTAG, E-JTAG, OnCE, COP, BDM or any of several other types of connections. When connected to a USB 2.0 or USB 3.0 port on your PC, the usb2Demon will operate up to Hi-Speed USB rates (480Mb\/s).\u003c\/p\u003e\n\n\u003ch3\u003eFlash Programming Software\u003c\/h3\u003e\n\n\u003cp\u003eThe usb2Demon has the ability to be licenced to use the Macraigor Systems OCDemon Flash programming software. This allows the usb2Wiggler to program on-board Flash EPROM from any PC with the Macraigor Flash Programming software installed.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768332214461,"sku":"U2D-COP","price":687.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-u2d-cop-usb2demon-usb-to-cop-jtag-23152201498813.jpg?v=1685080198"},{"product_id":"usb2demon-24-pin-atom-interface-macraigor-systems-uk","title":"Macraigor U2D-Atom-24 USB2Demon USB to 24-pin Atom","description":"\u003cp\u003eThe Macraigor Systems usb2Demonis a mid-cost interface used in the design, debug, and programming of microprocessor based embedded systems.\u003c\/p\u003e\n\n\u003cp\u003eOne side of the usb2Demon interfaces to the USB port of a host IBM compatible PC and the other side connects to an OCD (On-Chip Debug) port of the target system. This port may be JTAG, E-JTAG, OnCE, COP, BDM or any of several other types of connections. When connected to a USB 2.0 or USB 3.0 port on your PC, the usb2Demon will operate up to Hi-Speed USB rates (480Mb\/s).\u003c\/p\u003e\n\n\u003ch3\u003eFlash Programming Software\u003c\/h3\u003e\n\n\u003cp\u003eThe usb2Demon has the ability to be licenced to use the Macraigor Systems OCDemon Flash programming software. This allows the usb2Wiggler to program on-board Flash EPROM from any PC with the Macraigor Flash Programming software installed.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768332345533,"sku":"U2D-ATOM-24","price":858.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-u2d-atom-24-usb2demon-usb-to-24-pin-atom-23152200974525.jpg?v=1685150029"},{"product_id":"usb2demon-31-pin-atom-interface-macraigor-systems-uk","title":"Macraigor U2D-Atom-31 USB2Demon USB to 31-pin Atom","description":"\u003cp\u003eThe Macraigor Systems usb2Demonis a mid-cost interface used in the design, debug, and programming of microprocessor based embedded systems.\u003c\/p\u003e\n\n\u003cp\u003eOne side of the usb2Demon interfaces to the USB port of a host IBM compatible PC and the other side connects to an OCD (On-Chip Debug) port of the target system. This port may be JTAG, E-JTAG, OnCE, COP, BDM or any of several other types of connections. When connected to a USB 2.0 or USB 3.0 port on your PC, the usb2Demon will operate up to Hi-Speed USB rates (480Mb\/s).\u003c\/p\u003e\n\n\u003ch3\u003eFlash Programming Software\u003c\/h3\u003e\n\n\u003cp\u003eThe usb2Demon has the ability to be licenced to use the Macraigor Systems OCDemon Flash programming software. This allows the usb2Wiggler to program on-board Flash EPROM from any PC with the Macraigor Flash Programming software installed.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768332411069,"sku":"U2D-ATOM-31","price":742.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-u2d-atom-31-usb2demon-usb-to-31-pin-atom-23152201007293.jpg?v=1685150038"},{"product_id":"mikroe-1100-mikroprog-stm32-uk","title":"MikroProg for STM32","description":"\u003cp\u003eThe\u003cstrong\u003e mikroProg for STM32\u003c\/strong\u003e is a fast programmer and hardware debugger based on ST-LINK v2. Smart engineering allows mikroProg to support all STM32 ARM Cortex™-M0, Cortex™-M3 and Cortex™-M4 and Cortex™-M7 devices in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika ARM compilers (mikroC, mikroBasic, mikroPascal).\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e mikroProg™ for STM32 is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for ARM®. Works with other ARM® compilers too!\u003c\/p\u003e\n\n\u003ch3\u003eSingleClick™ Debugging\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ has native support for hardware step-by-step Debugging. debugger is a separate DLL module in mikroElektronika ARM® compilers which supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6], Run To Cursor[F4] debugging operations. Also, debugger supports standard and advanced breakpoints, which enable you to exploit the full potential of fast debugging.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eOn board mikroProg™ programmer requires special programming software called mikroProg™ for ARM®. This software is used for programming ALL of STM32 ARM® Cortex-M3™ microcontroller families, Software has intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332673213,"sku":"MIKROE-1100","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-stm32-36570047119583.jpg?v=1684955815"},{"product_id":"mikroe-1505-mikroprog-ti-tiva-uk","title":"MikroProg for Tiva","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg for Tiva\u003c\/strong\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support all Tiva C Series and Stellaris ARM Cortex-M3 and Cortex-M4 devices from Texas Instruments in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in mikroElektronika ARM compilers.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikroprog-8051.jpg\" alt=\"Mikroprog for Tiva Debugger\/Programmer\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003ch2\u003eCompiler Compatibility\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMikroProgfor Tiva\u003c\/strong\u003e is supported with mikroC, mikroBasicand mikroPascalcompilers for ARM\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332705981,"sku":"MIKROE-1505","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-tiva-36570068123871.jpg?v=1684955808"},{"product_id":"mikroe-1383-mikroprog-atmel-avr-debugger-programmer-uk","title":"MikroProg for AVR","description":"\u003ch3\u003emikroProg for AVR\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003emikroProg for AVR \u003c\/strong\u003e is a fast USB programmer. Smart engineering allows mikroProg to support 92 Atmel AVR devices in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika AVR compilers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for AVR\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility \u003c\/strong\u003e \u003cstrong\u003emikroProg™ for AVR®\u003c\/strong\u003e is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for AVR®. You may also use mikroProg™ for AVR® as a standalone programming tool.\u003c\/p\u003e\n\n\u003ch3\u003eSame pinout as AVRProg\u003c\/h3\u003e\n\n\u003cp\u003eWe made sure to retain backward compatibility with our popular AVRProg programmer. This means that you can use mikroProg™ with your existing designs or mikroElektronika development boards for AVR® where IDC10 programming headers are already integrated.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for AVR connector\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/www.mikroe.com\/img\/cms\/mikroprog-connector-idc10-a.jpg\" src=\"https:\/\/www.mikroe.com\/img\/cms\/mikroprog-connector-idc10-a.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for AVR inside\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_for_avr_inside.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_for_avr_inside.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eOn board mikroProg programmer requires special programming software called AVRFlash. It is used for programming over 90 Atmel AVR microcontrollers. Software has intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroprog_for_avr_inside.jpg\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/screen-avr.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/screen-avr.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003emikroProg™ for AVR®\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332738749,"sku":"MIKROE-1383","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-avr-29818697220285.jpg?v=1685132386"},{"product_id":"mikroe-1748-mikroprog-ftdi-ft90x-uk","title":"MikroProg for FT90x","description":"\u003csection id=\"info-description\"\u003e\n\u003ch3\u003emikroProg for FT90x\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003emikroProg for FT90x\u003c\/strong\u003e\u003c\/em\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support all FTDI Chip's 32-bit FT90x MCUs in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in mikroElektronika FT90x compilers.\u003c\/p\u003e\n\u003cimg alt=\"mikroProg for FT90x connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\n\u003ch3\u003eSupports Your Favorite Boards\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003emikroProg for FT90x\u003c\/strong\u003e has a connector for one-wire programming and debugging, compatible with boards like clicker 2 for FT90x (all upcoming FT90x hardware tools will also have built-in support)\u003c\/p\u003e\n\u003cimg alt=\"mikroProg for FT90x with clicker 2 ft90x\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/clicker2_ft900_mikroprog.jpg\" width=\"100%\"\u003e\n\u003ch3\u003eYou Won't Rip Out The Cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programmer cable and created a holder to tie it firmly into place.\u003c\/p\u003e\n\u003cimg alt=\"mikroProg for FT90x cable\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_cable.jpg\" width=\"100%\"\u003e\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eA standalone programming software utility called mikroProg Suite™ for FT90x® is available as an alternative to programming the MCU directly from the FT90x compiler. This software is used for programming of all supported FT90x microcontrollers. The software has an intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003emikroProg™ for FT90x 5LP programmer\/debugger\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332771517,"sku":"MIKROE-1748","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-ft90x-29029285068989.jpg?v=1685132042"},{"product_id":"mikroe-1382-mikroprog-8051-debugger-programmer-uk","title":"MikroProg for 8051","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003emikroProg for 8051 \u003c\/strong\u003e\u003c\/em\u003eis a fast USB programmer. Smart engineering allows mikroProg to support Atmel AT89 devices in a single programmer! Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika 8051 compilers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for 8051 connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003emikroProg™ for 8051\u003c\/strong\u003e is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for 8051. You may also use \u003cstrong\u003emikroProg™ for 8051\u003c\/strong\u003e as a standalone programming tool.\u003c\/p\u003e\n\n\u003ch3\u003eSame Pinout as 8051Prog2\u003c\/h3\u003e\n\n\u003cp\u003eWe made sure to retain backward compatibility with our popular 8051Prog2 programmer. This means that you can use mikroProg™ with your existing designs or mikroElektronika development boards for 8051 where IDC10 programming headers are already integrated.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for 8051 connector\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-8051-connector.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eYou Won't rip Out the Cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programmer cable and created a holder to tie it firmly into place.\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eOn board mikroProg™ programmer requires special programming software called 8051Flash. It is used for programming ALL of Atmel® AT89 microcontrollers. Software has intuitive interface and SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"8051flash-window-screen.jpg\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/8051flash-window-screen.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003emikroProg™ for 8051\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332837053,"sku":"MIKROE-1382","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-8051-29818681491645.jpg?v=1685132210"},{"product_id":"mikroprog-microchip-pic-debugger-programmer-mikroe-764-uk","title":"MikroProg for PIC, DSPIC and PIC32","description":"\u003cp\u003e\u003cstrong\u003emikroProg for PIC, dsPIC and PIC32\u003c\/strong\u003e is a fast USB 2.0 programmer with mikroICD™ hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30\/33, PIC24 and PIC32 devices in a single programmer! It supports over 1000 microcontrollers from Microchip. Outstanding performance, easy operation and elegant design are it's top features. Debug your code and monitor code execution on the chip itself. mikroProg™ technology brings the power of hardware debugging to your favorite compiler.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompiler Compatibility \u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for PIC®, dsPIC® and PIC32®. Choose the flavour that you like the most.\u003c\/p\u003e\n\n\u003ch3\u003eFaster programming\u003c\/h3\u003e\n\n\u003cp\u003eWe have done major enhancements in programming and debugging algorithms, and boosted programmer electronics to make it all possible. And the results are stunning! mikroProg™ is up to 400% faster than LvPICFlash.\u003c\/p\u003e\n\n\u003ch3\u003eSingleClick™ Debugging\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ has native support for mikroICD™ - hardware step-by-step In-Circuit Debugging in mikroElektronika compilers. It supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6] Run To Cursor[F4] debugging operations, as well as standard and advanced breakpoints.\u003c\/p\u003e\n\n\u003ch3\u003eOne firmware for all Devices\u003c\/h3\u003e\n\n\u003cp\u003eWith mikroProg™, single firmware takes care of all supported architectures. Supporting new microcontrollers is easy. Just by downloading the latest version of mikroProg Suite™ your programmer is ready to program new devices.\u003c\/p\u003e\n\n\u003ch3\u003ePower your Target Board\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ can provide power supply to your target board. Using mikroProg Suite™ Software, or directly from your compiler you can set the voltage level to be generated for you. It can provide up to 150mA of current in the voltage range from 1.8–5V.\u003c\/p\u003e\n\n\u003ch3\u003eCompatible with PICFlash\u003c\/h3\u003e\n\n\u003cp\u003eIf you have already integrated previous programmer connector in your device, don't worry. mikroProg™ retained the original connector pinout. Use front row of the connector (next to the knob) when programming mikromedia boards.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidentally and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332869821,"sku":"MIKROE-764","price":199.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-pic-dspic-and-pic32-29818741391549.jpg?v=1685132390"},{"product_id":"mikroe-1449-mikroprog-psoc-5lp-uk","title":"MikroProg for PSoC 5LP","description":"\u003ch3\u003emikroProg for PSoC 5LP\u003c\/h3\u003e\n\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003emikroProg for PSoC\u003c\/strong\u003e\u003c\/em\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support all PSoC 5LP ARM Cortex™-M3 devices from Infineon in a single programmer! It's also supported in PSoC® Creator IDE. Outstanding performance, easy operation, elegant design and a low price are its top features.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for PSoC 5LP connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog_8051_connected.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e \u003cstrong\u003emikroProg™ for PSoC® 5LP\u003c\/strong\u003e is supported in PSoC® Creator™, the free Windows-based IDE from Infineon which allows concurrent hardware and firmware design.\u003c\/p\u003e\n\n\u003ch3\u003eSupports your favorite boards\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003emikroProg™ for PSoC®\u003c\/strong\u003e features IDC10 JTAG connector for SWD programming and debugging, compatible with boards like mikromedia for PSoC® 5LP. You can also use an adapter to connect it to Cortex Debug connectors found on other PSoC® boards as well.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003eBefore you start working with \u003cstrong\u003emikroProg for PSoC 5LP\u003c\/strong\u003e , you'll need to download PSoC® Programmer™ from Infineon's website (registration required). It is a programming application with the necessary Windows drivers included. For detailed instructions on installing the software and more information about the programmer itself.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for PSoC 5LP programmer software\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/psoc_programmer_software.png\" width=\"69%\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003emikroProg™ for PSoC® 5LP\u003c\/strong\u003e programmer\/debugger\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768332902589,"sku":"MIKROE-1449","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-psoc-5lp-29880948785341.jpg?v=1685106475"},{"product_id":"mikroe-1303-mikroprog-to-st-link-v2-adapter-uk","title":"MikroProg to ST-Link v2 Adapter","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg to ST-Link v2 Adapter\u003c\/strong\u003e allows you to connect mikroProg for STM32 programmer and hardware debugger to 20-pin male JTAG connector on your target board. The Adapter consists of one 2x10 male header and a 2x10 female socket. Its recommended to first place the adapter on 2x10 male header on the target board, and then plug in the mikroProg into the adapters 2x5 male header.\u003c\/p\u003e\n\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\n\u003ctable\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eType\u003c\/td\u003e\n            \u003ctd\u003eAdapter\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eApplications\u003c\/td\u003e\n            \u003ctd\u003eAdapter allows you to connect mikroProg for STM32 programmer and hardware debugger to 20-pin male JTAG connector on your target board\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOn-board modules\u003c\/td\u003e\n            \u003ctd\u003e2x10 male header and a 2x10 female socket\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003eGPIO\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003eIDC10\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768337948861,"sku":"MIKROE-1303","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-adapter-mikroprog-to-st-link-v2-adapter-30237431660733.jpg?v=1685033743"},{"product_id":"raven-jtag-bdm-interface-for-mips-macraigor-uk","title":"Macraigor Raven JTAG\/BDM Interface for MIPS","description":"\u003cp\u003eRaven JTAG\/BDM Interface for MIPS.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768362885309,"sku":"RMIPS","price":687.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-raven-jtag-bdm-interface-for-mips-23152115712189.jpg?v=1685041497"},{"product_id":"macraigor-raven-jtag-bdm-interface-for-once-uk","title":"Macraigor Raven JTAG\/BDM Interface for OnCE","description":"\u003cp\u003eRaven JTAG\/BDM Interface for OnCE.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768362918077,"sku":"RONCE","price":687.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-raven-jtag-bdm-interface-for-once-23152116203709.jpg?v=1685041499"},{"product_id":"raven-jtag-bdm-interface-for-tx49-macraigor-uk","title":"Macraigor Raven JTAG\/BDM Interface for TX49","description":"\u003cp\u003eRaven JTAG\/BDM Interface for TX49.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768362950845,"sku":"RTX49","price":687.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-raven-jtag-bdm-interface-for-tx49-23152116236477.jpg?v=1685128427"},{"product_id":"wifidemon-jtag-interface-for-mips-macraigor-systems-uk","title":"Macraigor WiFiDemon JTAG Interface for MIPS","description":"\u003cp\u003eMacraigor WiFiDemon JTAG Interface for MIPS.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768363540669,"sku":"WIFI-MIPS","price":275.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-wifidemon-jtag-interface-for-mips-29038589903037.jpg?v=1685132574"},{"product_id":"wiggler-host-adapter-for-cop-macraigor-systems-uk","title":"Macraigor Wiggler Host Adapter for COP","description":"\u003cp\u003eThe original Macraigor Wiggler host adapter for COP.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768363638973,"sku":"WNPJ-COP","price":192.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-wiggler-host-adapter-for-cop-23152207233213.jpg?v=1685157593"},{"product_id":"macraigor-wbdm32-3v-wiggler-uk","title":"Macraigor Wiggler Host Adapter for CPU32 3V BDM","description":"\u003cp\u003eThe original Macraigor Wiggler host adapter for CPU32 3V BDM.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768363671741,"sku":"WBDM32-3V","price":236.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-wiggler-host-adapter-for-cpu32-3v-bdm-23152206184637.jpg?v=1685063992"},{"product_id":"wiggler-host-adapter-for-amcc-macraigor-systems-uk","title":"Macraigor Wiggler Host Adapter for AMCC","description":"\u003cp\u003eThe original Macraigor Wiggler host adapter for AMCC.\u003c\/p\u003e","brand":"Macraigor Systems, LLC","offers":[{"title":"Default Title","offer_id":37768363802813,"sku":"WAMCC","price":247.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/macraigor-systems-llc-pc-interface-wiggler-host-adapter-for-amcc-23152207003837.jpg?v=1685157600"},{"product_id":"mikroe-2002-mikroprog-for-cec1302-uk","title":"MikroProg for CEC1302","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg for CEC\u003c\/strong\u003e is a fast programmer and hardware debugger. Smart engineering allows mikroProg to support the CEC cryptographic engine with secure firmware updating. Outstanding performance, easy operation, elegant design and low price are it's top features. It is supported in MikroElektronika ARM compilers (mikroC, mikroBasic and mikroPascal).\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/\/www.thedebugstore.com\/uploads\/Images\/mikroprog-8051.jpg\" alt=\"MikroProg for CEC Debugger\/Programmer\" class=\"fr-fic fr-dib\"\u003e.\u003c\/p\u003e\u003cp\u003eThis mikroProg supports the CEC1302 and CEC1702(+EFUSE) microcontrollers from Microchip.\u003c\/p\u003e\u003ch2\u003eSingleClick Board™Debugging\u003c\/h2\u003e\u003cp\u003emikroProghas native support for hardware step-by-step Debugging. debugger is a separate DLL module in mikroElektronika ARM\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768364687549,"sku":"MIKROE-2002","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-cec-36570029195487.jpg?v=1684955818"},{"product_id":"mikroe-2331-mikroprog-kinetis-uk","title":"MikroProg for Kinetis","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003emikroProg for Kinetis\u003c\/strong\u003e\u003c\/em\u003e is a fast programmer and hardware debugger for NXP's ARM Cortex™-M microcontrollers from the Kinetis family. Outstanding performance, easy operation, elegant design and low price are its top features. \u003cstrong\u003emikroProg for Kinetis\u003c\/strong\u003e is fully supported in MikroElektronika ARM compilers (mikroC, mikroPascal, and mikroBasic).\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"mikroProg for Kinetis connected\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/shop.mikroe.com\/img\/cms\/mikroprog-connected-intro.jpg\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompiler Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003emikroProg™ for Kinetis\u003c\/strong\u003e is supported with MikroElektronika mikroC™, mikroBasic™ and mikroPascal™ compilers for ARM® microcontrollers.\u003c\/p\u003e\n\n\u003ch3\u003eSingleClick™ Debugging\u003c\/h3\u003e\n\n\u003cp\u003emikroProg™ has native support for hardware step-by-step Debugging. debugger is a separate DLL module in mikroElektronika ARM® compilers which supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6], Run To Cursor[F4] debugging operations. Also, debugger supports standard and advanced breakpoints, which enable you to exploit the full potential of fast debugging.\u003c\/p\u003e\n\n\u003ch3\u003eYou won't rip out the cable\u003c\/h3\u003e\n\n\u003cp\u003eHow many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programmer cable and created a holder to tie it firmly into place\u003c\/p\u003e\n\n\u003ch3\u003eProgramming Software\u003c\/h3\u003e\n\n\u003cp\u003emikroProg programmer requires special programming software called mikroProg Suite for ARM. This software is used for programming all supported Kinetis microcontrollers. The software has an intuitive interface and uses SingleClick™ programming technology.\u003c\/p\u003e\n\n\u003ch3\u003eThe package Contains\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003eDamage resistant protective box\u003c\/li\u003e\n    \u003cli\u003emikroProg™ for Kinetis\u003c\/li\u003e\n    \u003cli\u003eUSB cable\u003c\/li\u003e\n    \u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768370127037,"sku":"MIKROE-2331","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-kinetis-36569989480671.jpg?v=1684955824"},{"product_id":"mikoprog-msp432-mikroe-2511-uk","title":"MikroProg for MSP432","description":"\u003cp\u003eThe \u003cstrong\u003emikroProg for MSP432\u003c\/strong\u003e is a fast and reliable USB programmer and hardware debugger. This mikroProg supports the SimpleLink MSP432 microcontroller family from Texas Instruments. .\u003c\/p\u003e\u003ch2\u003eCompiler Compatibility\u003c\/h2\u003e\u003cp\u003emikroProg for MSP432 is supported with mikroC, mikroBasic and mikroPascal compilers for ARM.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"Default Title","offer_id":37768397095101,"sku":"MIKROE-2511","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-mikroprog-for-msp432-36570008420575.jpg?v=1684955821"},{"product_id":"tag-connect-tc2050-pgusb-10-pin-locking-connector-to-usb-2-0-cable","title":"Tag-Connect TC2050-PGUSB 10-Pin Plug-of-Nails Cable to 6-Pin IDC and USB Type A (Legged or No Legs)","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003eOne 10-Pin Footprint for a 6-Pin Programming Header and a USB Port\u003c\/h3\u003e\n\u003cp\u003eThe TC2050-PGUSB splits the 10-pin TC2050 footprint two ways: pads 1 to 6 go straight through to a 6-pin (2x3) 0.1 in female IDC connector for your programmer, and pads 7 to 10 go to a USB 2.0 cable with a Type A plug. One connection both programs the board and links its USB port to a PC, with no programming header or USB socket fitted to the board.\u003c\/p\u003e\n\u003ch4\u003eOptions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eChoice\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eFour legs latch into holes in the PCB, so the cable holds itself in place (TC2050-PGUSB)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNo leg holes, so a smaller footprint; hold by hand, with a \u003ca href=\"\/products\/tag-connect-tc2050-clip-uk\"\u003eTC2050-CLIP\u003c\/a\u003e or in a fixture (TC2050-PGUSB-NL)\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003ePinout\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eTC2050 Pad\u003c\/th\u003e\n\u003cth\u003eGoes To\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e1 to 6\u003c\/td\u003e\n\u003ctd\u003e6-pin IDC pins 1 to 6, straight through\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eUSB GND\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eUSB D-\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eUSB D+\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eUSB VBUS\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eTag-Connect does not publish an overall length for the PGUSB versions.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003cp\u003e\u003cstrong\u003ePCB footprint:\u003c\/strong\u003e the standard TC2050 footprint, ten contact pads at 0.05 in pitch with three alignment holes; the Legged footprint adds four leg latch holes. No solder paste on the contact pads. Route your programming signals to pads 1 to 6 in the order your programmer's 6-pin header expects, and the USB lines to pads 7 to 10. Our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e links the TC2050 footprint drawings.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eSpring-Pin Contacts\u003c\/h4\u003e\n\u003cp\u003eIn Tag-Connect's cycle testing, its spring pins last for well over 100,000 operations. On the Legged version the legs hold the plug on the board, so no fixture or hand pressure is needed.\u003c\/p\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cp\u003eEngineers designing boards with a USB device port who program through a tool with a 6-pin 2x3 0.1 in male header, and who want to program and test USB through one footprint in development or on the production line.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevice Family\u003c\/th\u003e\n\u003cth\u003eDebugger or Programmer\u003c\/th\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMCUs with a USB device interface\u003c\/td\u003e\n\u003ctd\u003eProgrammer or debugger with a 6-pin 2x3 0.1 in male header\u003c\/td\u003e\n\u003ctd\u003eThe 6-pin IDC socket plugs onto the tool's header; the USB Type A plug goes to a PC or USB hub\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eTag-Connect does not name specific programmers for this cable. Check that your tool's 6-pin pin order matches the pads you route to 1 to 6.\u003c\/p\u003e\n\u003ch4\u003eWhen to Choose a Different Cable\u003c\/h4\u003e\n\u003cp\u003eIf you only need a programming connection on a 10-pin footprint, use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-cable-uk\"\u003eTC2050-IDC\u003c\/a\u003e. For a 6-pin footprint with a USB lead, see the \u003ca href=\"\/products\/tag-connect-tc2030-usb-cable-uk\"\u003eTC2030-USB\u003c\/a\u003e. All our 10-pin cables are in \u003ca href=\"\/collections\/10-pin-tag-connect-cables-tc2050-catalogue\"\u003e10-Pin Tag-Connect Cables\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eCompare the Versions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-PGUSB\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging: clips in and stays connected hands-free\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-PGUSB-NL\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eProduction programming and test, or debugging with a TC2050-CLIP; smaller footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eBoth versions use the same ten-pad contact pattern and pinout; only the head differs.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n","brand":"Tag-Connect, LLC","offers":[{"title":"Legged","offer_id":37768424227005,"sku":"TC2050-PGUSB","price":60.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs","offer_id":57730935193975,"sku":"TC2050-PGUSB-NL","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/tag-connect-llc-cable-tag-connect-tc2050-pgusb-10-pin-locking-connector-to-usb-2-0-cable-29821169402045.jpg?v=1685057881"},{"product_id":"mikroe-codegrip-for-arm-programmer-debugger-uk","title":"CODEGRIP for ARM","description":"\u003ch2\u003eWORLD'S FIRST DEBUGGER OVER WiFi\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip front debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDebugging and programming over WiFi\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP for ARM is first-ever embedded programmer \u0026amp; debugger over WiFi. Enjoy cable-free world!\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n*CODEGRIP WiFi License is available as an add-on feature.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip side debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAccess anywhere, under any circumstances at anytime\u003c\/h3\u003e\n\n\u003cp\u003eUnlimited possibilities for development, you can place the CODEGRIP for ARM programmer \u0026amp; debugger in almost any hardly accessible places such as hazardous environment, agricultural setting, and high-rise buildings while still retaining full debugging and programming access.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip back debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-back.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-back.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eRedefine technical support\u003c\/h3\u003e\n\n\u003cp\u003eReplicating user's hardware has always been a challenge, debugging trough WiFi enables technical support to directly access user's hardware.\u003cbr\u003e\nDo more with less effort!\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP programmer \u0026amp; debugger, please read the CODEGRIP Manual.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Programmer and debugger CODEGRIP arm v8 legend\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-in-position-and-legend.jpg\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-in-position-and-legend.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCODEGRIP SUITE\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot1\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot1.png\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot1.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCODEGRIP Suite\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP Suite is a powerful software tool. It is used to intelligently manage programming tasks, as well as various other options and settings of the CODEGRIP.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot2\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot2.png\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot2.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eEffortless programming with complete control over MCU's\u003c\/h3\u003e\n\n\u003cp\u003eWireless connectivity and USB-C connector allow seamless and effortless programming of a huge number of various ARM® Cortex-M based microcontrollers, providing users with both the mobility and the complete control over the microcontroller programming and debugging process.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot3\" data-entity-type=\"\" data-entity-uuid=\"\" data-mce-src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot3.png\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot3.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePlug and play\u003c\/h3\u003e\n\n\u003cp\u003eUSB-C debugger enables effortless programming\/debugging over generic USB driver connection without the need for additional driver support.\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP Suite and module, please read the CODEGRIP Manual.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB-C","offer_id":43331307536607,"sku":"MIKROE-5273","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"USB-C and WiFi","offer_id":43331307569375,"sku":"MIKROE-3460","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-usb-c-and-wifi-codegrip-for-arm-38006674161887.jpg?v=1684977052"},{"product_id":"mikroe-codegrip-for-ti-tiva-programmer-debugger-uk","title":"CODEGRIP for Tiva","description":"\u003cp\u003eCODEGRIP for TI Tiva™ is the first Programmer \/ Debugger for ARM Cortex with a WiFi or USB-C interface. It supports all STM32 ARM Cortex-M based MCUs.\u003c\/p\u003e\n\n\u003cp\u003eNow you can debug and program your target board remotely. This is ideal if your target board is located in an inaccessible place such as a hazardous environment, in an agricultural setting or high-rise building.\u003c\/p\u003e\n\n\u003cp\u003eDo more, safely, and with less effort!\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"USB-C","offer_id":43425214595295,"sku":"MIKROE-5281","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"USB-C and WiFi","offer_id":43425214628063,"sku":"MIKROE-3463","price":251.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-codegrip-for-tiva-28869587665085.jpg?v=1685162102"},{"product_id":"mikroe-codegrip-for-nxp-kinetis-uk","title":"CODEGRIP for Kinetis","description":"\u003ch2\u003eUniversal Programmer and Debugger for Kinetis over USB-C and WiFi\u003c\/h2\u003e\n\n\u003ch3\u003eTHE WORLD'S FIRST DEBUGGER OVER WIFI\u003c\/h3\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip front debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-front.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDebugging and Programming Over WiFi\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP is the first-ever embedded programmer \u0026amp; debugger over WiFi. Enjoy a cable-free world!\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n*CODEGRIP WiFi License is available as an add-on feature. \u003cimg alt=\"codegrip side debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-side.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAccess Anywhere, Under Any Circumstance, Anytime\u003c\/h3\u003e\n\n\u003cp\u003eUnlimited possibilities for development, you can place the CODEGRIP programmer \u0026amp; debugger in almost any hardly accessible places such as hazardous environments, agricultural settings, and high-rise buildings while still retaining full debugging and programming access.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip back debugging and programming over WiFi and USB-C\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-back-kinetis.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eRedefines Technical Support\u003c\/h3\u003e\n\n\u003cp\u003eReplicating users' hardware has always been a challenge, debugging through WiFi enables technical support to directly access users' hardware.\u003cbr\u003e\nDo more with less effort!\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP programmer \u0026amp; debugger, please read the CODEGRIP Manual.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Programmer and debugger CODEGRIP arm v8 legend\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip\/codegrip-in-position-and-legend.jpg\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCODEGRIP SUITE\u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot1\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot1.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCODEGRIP Suite\u003c\/h3\u003e\n\n\u003cp\u003eCODEGRIP Suite is a powerful software tool. It is used to intelligently manage programming tasks, as well as various other options and settings of the CODEGRIP.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot2\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot2.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eEffortless Programming with Complete MCU Control\u003c\/h3\u003e\n\n\u003cp\u003eWireless connectivity and USB-C connector allow seamless and effortless programming of a huge number of various Kinetis-based microcontrollers, providing users with both mobility and complete control over the microcontroller programming and debugging process.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"codegrip suite scan screenshot3\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.mikroe.com\/img\/8th-generation\/Programmer-and-debugger\/codegrip-suite\/codegrip-suite-scan-screenshot3.png\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePlug and Play\u003c\/h3\u003e\n\n\u003cp\u003eUSB-C debugger enables effortless programming\/debugging over generic USB driver connection without the need for additional driver support.\u003c\/p\u003e\n\n\u003cp\u003eTo better understand the functions of the CODEGRIP Suite and module, please read the CODEGRIP Manual.\u003c\/p\u003e","brand":"Mikroelektronika d.o.o.","offers":[{"title":"no","offer_id":43391496978655,"sku":"MIKROE-5280","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"Yes","offer_id":43391497011423,"sku":"MIKROE-3462","price":251.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/mikroelektronika-d-o-o-programmer-codegrip-for-kinetis-28869578621117.jpg?v=1685162453"},{"product_id":"ag-connect-reversed-10-pin-cortex-cable-cortexribbon10-l","title":"Tag Connect Reversed 10-Pin ARM Cortex Debug Cable for Atmel ICE","description":"\u003csection class=\"product-rich\"\u003e\n\u003ch2\u003eProfessional ARM Cortex Programming Cable\u003c\/h2\u003e\n\u003cp\u003eThe CORTEXRIBBON10-L is a specialised reversed 10-pin ribbon cable engineered for ARM Cortex debugging and programming applications. This cable features the LEMTA (reversed) configuration specifically designed for use with Atmel ICE debuggers, which require pin-reversed connectivity to maintain correct signal mapping.\u003c\/p\u003e\n\u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e\n\u003cdiv class=\"tbl\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVTRef\u003c\/td\u003e\n\u003ctd\u003eTarget reference voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO\/TMS\u003c\/td\u003e\n\u003ctd\u003eSerial Wire Data I\/O \/ Test Mode Select\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK\/TCK\u003c\/td\u003e\n\u003ctd\u003eSerial Wire Clock \/ Test Clock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO\/TDO\u003c\/td\u003e\n\u003ctd\u003eSerial Wire Output \/ Test Data Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eKEY\u003c\/td\u003e\n\u003ctd\u003eNot connected (keying pin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eNC\/TDI\u003c\/td\u003e\n\u003ctd\u003eNot connected \/ Test Data In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003ctd\u003eReset signal (active low)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003eConnection Instructions\u003c\/h3\u003e\n\u003cp\u003eConnect the female IDC connector to your ARM Cortex programmer\/debugger 10-pin male header. The reversed LEMTA orientation corrects for Atmel ICE's non-standard pin numbering where pin 1 is physically located at pin 10 position.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e\n\u003cstrong\u003eImportant:\u003c\/strong\u003e The LEMTA version is essential for Atmel ICE compatibility. Standard orientation cables will cause signal conflicts and potential hardware damage.\u003c\/div\u003e\n\u003ch3\u003eCompatible Interfaces\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSerial Wire Debug (SWD) - 2-wire debugging protocol\u003c\/li\u003e\n\u003cli\u003eJTAG - 4-wire IEEE 1149.1 standard interface\u003c\/li\u003e\n\u003cli\u003eSerial Wire Output (SWO) trace support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis cable bridges the gap between your Atmel ICE debugger and target boards featuring the standard 10-pin 50mil (1.27mm) FTSH-style headers, enabling seamless programming and debugging workflows.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Default Title","offer_id":37768444674237,"sku":"CORTEXRIBBON10-L","price":19.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/tag-connect-llc-cable-tag-connect-reversed-10-pin-cortex-ribbon-cable-lemta-29821557047485.jpg?v=1685080903"},{"product_id":"tag-connect-tc2030-alt-legged-cable-uk","title":"Tag-Connect TC2030-ALT 6-Pin Cable for Altera USB-Blaster\/ByteBlaster","description":"\u003cp\u003eThe TC2030-ALT programming cable is a special cable that has a TC2030 \"Legged\" Tag-Connector at one end and a 10-pin 0.1″ pitch female IDC connector at the other. The 10-pin IDC can be plugged directly into some Altera USB Blasters and ByteBlasters.\u003c\/p\u003e\u003cp\u003eThe cable is wired as follows:\u003c\/p\u003e\u003ctable border=\"1\" style=\"width:36%;\"\u003e\n\u003ccaption\u003eTC2030-ALT Connections\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\" style=\"width:40.32%;\"\u003eTC2030-NL\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"width:59.4913%;\"\u003e10-pin 0.1″ IDC\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:40.32%;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width:59.4913%;\"\u003e4     Vref\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:40.32%;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width:59.4913%;\"\u003e5     TMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:40.32%;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"width:59.4913%;\"\u003e9     TDI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:40.32%;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"width:59.4913%;\"\u003e1     TCLK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:40.32%;\"\u003e5\u003c\/td\u003e\n\u003ctd style=\"width:59.4913%;\"\u003e2,10  GND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:40.32%;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"width:59.4913%;\"\u003e3     TDO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003ePlease refer to the TC2030-IDC datasheet for details of the TC2030 connector and footprint.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Legged (TC2030-ALT)","offer_id":55804980167031,"sku":"TC2030-ALT","price":68.75,"currency_code":"GBP","in_stock":true},{"title":"No Legs (TC2030-ALT-NL)","offer_id":55804980199799,"sku":"TC2030-ALT-NL","price":68.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2030-alt-tag-connect-tc2030-alt-legged-pogo-pin-cable-72351608504695.png?v=1732671822"},{"product_id":"tag-connect-tc2030-ctx-etm-cortex-trace-cable-uk","title":"Tag Connect TC2030-CTX-ETM ARM Cortex Trace Cable","description":"\u003cp\u003e\u003cstrong\u003ePinout, footprint and wiring diagram:\u003c\/strong\u003e \u003ca href=\"\/blogs\/tech-tips\/tc2030-ctx-etm-pinout\"\u003eTC2030-CTX-ETM pinout\u003c\/a\u003e.\u003c\/p\u003e\n\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional ARM Cortex Debug and Trace Cable\u003c\/h2\u003e\n\u003cp\u003eThe TC2030-CTX-ETM is Tag-Connect's specialised cable for ARM Cortex processors requiring both Serial Wire Debug (SWD) and Embedded Trace Macrocell (ETM) capabilities. This professional-grade cable combines a 6-pin TC2030 Tag-Connector for standard SWD debugging with a 10-pin TC2050 connector for extended trace signals, providing comprehensive debugging and trace capture for ARM Cortex applications.\u003c\/p\u003e\n\u003ch3\u003eDual Connector Design\u003c\/h3\u003e\n\u003cp\u003eThe cable features two distinct connector types optimised for different debugging functions. The 6-pin TC2030 connector handles standard SWD operations including programming, debugging, and Serial Wire Output (SWO). The additional 10-pin TC2050 connector connects to pins 11-20 of the ARM Cortex 20-pin connector, providing access to the four-channel ETM trace data lines and trace clock signal.\u003c\/p\u003e\n\u003cdiv class=\"tbl\"\u003e \u003ch4\u003eTC2030 SWD Connector Pinout\u003c\/h4\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003ePin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVCC\u003c\/td\u003e\n\u003ctd\u003eTarget reference voltage\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO\u003c\/td\u003e\n\u003ctd\u003eSerial Wire Data I\/O\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003ctd\u003eTarget reset (active low)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK\u003c\/td\u003e\n\u003ctd\u003eSerial Wire Clock\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround reference\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO\u003c\/td\u003e\n\u003ctd\u003eSerial Wire Output\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003c\/div\u003e\n\u003cdiv class=\"tbl\"\u003e \u003ch4\u003eTC2050 ETM Trace Connector Pinout\u003c\/h4\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eTC2050 Pin\u003c\/th\u003e\n\u003cth\u003eCortex 20-Pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround reference\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround reference\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround reference\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround reference\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround reference\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003eTRACEDATA\u003c\/td\u003e\n\u003ctd\u003eTrace data line 3\u003c\/td\u003e\n\u003c\/tr\u003e[1] \u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003eTRACEDATA\u003c\/td\u003e\n\u003ctd\u003eTrace data line 2\u003c\/td\u003e\n\u003c\/tr\u003e[2] \u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003eTRACEDATA\u003c\/td\u003e\n\u003ctd\u003eTrace data line 1\u003c\/td\u003e\n\u003c\/tr\u003e[3] \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003eTRACEDATA\u003c\/td\u003e\n\u003ctd\u003eTrace data line 0\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eTRACECLK\u003c\/td\u003e\n\u003ctd\u003eTrace clock signal\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003c\/div\u003e\n\u003ch3\u003ePCB Footprint Requirements\u003c\/h3\u003e\n\u003cp\u003eThe TC2030 connector requires a minimal PCB footprint consisting of six test pads and four alignment holes arranged in a specific pattern. The footprint measures just 7mm × 4mm, offering significant space savings compared to traditional 20-pin headers.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003cstrong\u003eImportant:\u003c\/strong\u003e Ensure your PCB design follows manufacturer's signal integrity guidelines for trace length matching and termination when implementing ETM trace signals. High-speed trace data requires careful attention to signal integrity. \u003c\/div\u003e\n\u003ch3\u003eCompatible Debug Probes\u003c\/h3\u003e\n\u003cp\u003eThis cable is designed for use with professional trace-capable debug probes including:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eARM Keil ULINKpro with 20-pin MIPI connector\u003c\/li\u003e \u003cli\u003eIAR I-JET debug probes\u003c\/li\u003e \u003cli\u003eSEGGER J-Trace series with 20-pin support\u003c\/li\u003e \u003cli\u003eGeneric 20-pin Cortex debug connectors\u003c\/li\u003e \u003c\/ul\u003e\n\u003cdiv class=\"imgph\"\u003eTC2030-CTX-ETM cable with both connectors visible\u003c\/div\u003e\n\u003ch3\u003eInstallation and Usage\u003c\/h3\u003e\n\u003cp\u003eThe TC2030 connector features spring-loaded pins that make contact with PCB pads through precise alignment holes. The legged version provides secure retention during extended debugging sessions. For production programming applications, the TC2030-CTX-ETM-NL variant offers a \"no-legs\" design for rapid connection and disconnection.\u003c\/p\u003e\n\u003cdiv class=\"spec-note\"\u003e Signal integrity considerations: ETM trace signals operate at high frequencies and require matched trace lengths and appropriate termination. Consult your microcontroller's reference manual for specific trace port implementation details. \u003c\/div\u003e\u003c\/section\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Default Title","offer_id":37768445755581,"sku":"TC2030-CTX-ETM","price":74.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2030-ctx-etm-tag-connect-tc2030-ctx-etm-cortex-cable-72351440142711.png?v=1732671840"},{"product_id":"tag-connect-tc2030-ctx-st14-cable","title":"Tag-Connect TC2030-CTX-STDC14 6-Pin Cable for ST-LINK V3 (Legged or No Legs)","description":"\u003cp\u003e\u003cstrong\u003ePinout, footprint and wiring diagram:\u003c\/strong\u003e \u003ca href=\"\/blogs\/tech-tips\/tc2030-ctx-stdc14-pinout\"\u003eTC2030-CTX-STDC14 pinout\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Tag-Connect TC2030-CTX-STDC14 connects an ST STLINK-V3 debugger's 14-pin STDC14 connector to a 6-pad TC2030 footprint on your PCB, for SWD, SWO and reset on STM32 targets with no header fitted. This is the legged version; the no-legs version is the TC2030-CTX-NL-STDC14.\u003c\/p\u003e\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Legged","offer_id":37768445821117,"sku":"TC2030-CTX-ST14","price":58.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs","offer_id":57737456222583,"sku":"TC2030-CTX-NL-ST14","price":58.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2030-ctx-stdc14-tag-connect-tc2030-ctx-stdc14-cable-71069935731063.png?v=1729993783"},{"product_id":"tag-connect-tc2030-icespi-lemta-avr-cable","title":"Tag-Connect TC2030-ICESPI 6-Pin Cable for Atmel-ICE","description":"\u003csection class=\"product-rich\"\u003e \u003ch3\u003eProfessional AVR Development Solution\u003c\/h3\u003e \u003cp\u003eThe TC2030-ICESPI programming cable represents the pinnacle of professional AVR microcontroller development tools. Engineered specifically for Atmel-ICE compatibility, this cable bridges the gap between sophisticated debugging hardware and space-constrained embedded designs. The innovative Tag-Connect technology eliminates traditional programming headers whilst maintaining the reliability and functionality demanded by professional development environments.\u003c\/p\u003e \u003ch3\u003eComprehensive Protocol Support\u003c\/h3\u003e \u003cp\u003eSupporting the complete spectrum of AVR programming interfaces, the TC2030-ICESPI ensures compatibility across the entire AVR microcontroller family. From classic ATmega devices using SPI and debugWIRE protocols to modern tinyAVR chips supporting TPI and UPDI interfaces, this single cable serves diverse development requirements.\u003c\/p\u003e \u003cdiv class=\"aside\"\u003e \u003cstrong\u003eProtocol Compatibility Matrix:\u003c\/strong\u003e This cable supports legacy SPI programming for all AVR devices, debugWIRE for on-chip debugging of megaAVR and tinyAVR devices, TPI for programming-only tinyAVR variants, PDI for XMEGA devices, and aWire for advanced debugging applications. \u003c\/div\u003e \u003ch3\u003eWiring Quick-Start Guide\u003c\/h3\u003e \u003cp\u003eConnecting the TC2030-ICESPI requires careful attention to the Atmel-ICE's unique pin arrangement. The 10-pin IDC connector features reversed pin numbering compared to standard ARM debug connectors, necessitating the LEMTA version for proper operation.\u003c\/p\u003e \u003ctable class=\"tbl\"\u003e \u003cthead\u003e \u003ctr\u003e\n\u003cth\u003eTC2030 Pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eAtmel-ICE Pin\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eMISO\/TDO\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eMaster In, Slave Out \/ Test Data Out\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eVTG\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eTarget voltage reference\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eSCK\/TCK\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eSerial Clock \/ Test Clock\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eMOSI\/TDI\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eMaster Out, Slave In \/ Test Data In\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e\/RESET\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eTarget reset (active low)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e2,10\u003c\/td\u003e\n\u003ctd\u003eGround reference\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003ePCB Footprint Implementation\u003c\/h3\u003e \u003cp\u003eThe TC2030 footprint requires precise implementation to ensure reliable mechanical and electrical connections. The design incorporates six contact pads with specific dimensions and four alignment holes for the legged connector variant.\u003c\/p\u003e \u003cdiv class=\"spec-note\"\u003e \u003cstrong\u003eCritical Design Requirements:\u003c\/strong\u003e Contact pads must be 0.031\" diameter with 0.003\" tolerance. No solder paste should be applied to contact pads. Keep-out areas must be observed around the connector footprint to prevent mechanical interference. \u003c\/div\u003e \u003ch3\u003eProgramming Protocol Details\u003c\/h3\u003e \u003ch4\u003eSPI Interface Programming\u003c\/h4\u003e \u003cp\u003eThe Serial Peripheral Interface provides the foundation for AVR programming across all device variants. Operating at frequencies up to 5MHz, SPI programming offers robust, reliable firmware updates with comprehensive fuse and lock bit control.\u003c\/p\u003e \u003cpre\u003e\u003ccode\u003e\/\/ SPI Programming Sequence Example \/\/ 1. Assert RESET (low) \/\/ 2. Apply programming enable sequence \/\/ 3. Poll for programming mode acknowledgment \/\/ 4. Execute memory operations \/\/ 5. Release RESET to exit programming mode\u003c\/code\u003e\u003c\/pre\u003e \u003ch4\u003edebugWIRE Interface\u003c\/h4\u003e \u003cp\u003eThe debugWIRE protocol transforms the RESET pin into a bidirectional debugging interface, enabling real-time program execution control, breakpoint management, and memory inspection without additional hardware pins.\u003c\/p\u003e \u003cdiv class=\"aside\"\u003e \u003cstrong\u003edebugWIRE Considerations:\u003c\/strong\u003e Once enabled, debugWIRE takes control of the RESET pin. Standard SPI programming becomes unavailable until debugWIRE is explicitly disabled through the debugging interface. \u003c\/div\u003e \u003ch4\u003ePDI Protocol for XMEGA Devices\u003c\/h4\u003e \u003cp\u003eProgram and Debug Interface provides high-speed programming and debugging for XMEGA microcontrollers. Using a two-wire interface with clock and bidirectional data signals, PDI enables efficient flash, EEPROM, and configuration memory access.\u003c\/p\u003e \u003ch3\u003eProduction Programming Considerations\u003c\/h3\u003e \u003cp\u003eFor high-volume production environments, the TC2030-ICESPI-NL no-legs variant offers rapid programming cycles without mechanical wear on PCB footprints. The legged version excels in development scenarios requiring extended debugging sessions with hands-free operation.\u003c\/p\u003e \u003cdiv class=\"imgph\"\u003eTC2030 connector comparison showing legged vs no-legs variants\u003c\/div\u003e \u003ch3\u003eSignal Integrity and Performance\u003c\/h3\u003e \u003cp\u003eThe 6-inch cable length represents an optimal balance between flexibility and signal integrity. High-frequency programming protocols benefit from minimised transmission line effects, whilst the ribbon cable construction provides controlled impedance characteristics essential for reliable data transmission.\u003c\/p\u003e \u003ch3\u003eCompatibility and Ecosystem Integration\u003c\/h3\u003e \u003cp\u003eBeyond Atmel-ICE compatibility, the TC2030 ecosystem includes variants for SEGGER J-Link, ST-LINK, and PICkit programmers. This standardisation enables consistent PCB footprints across diverse debugging tool requirements, simplifying design validation and production programming workflows.\u003c\/p\u003e \u003c\/section\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Legged \/ No","offer_id":55790135116151,"sku":"TC2030-ICESPI","price":76.0,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Yes (LEMTA)","offer_id":55790145601911,"sku":"TC2030-ICESPI-LEMTA","price":76.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs (NL) \/ No","offer_id":55790135148919,"sku":"TC2030-ICESPI-NL","price":76.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs (NL) \/ Yes (LEMTA)","offer_id":55790145634679,"sku":"TC2030-ICESPI-NL-LEMTA","price":76.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/tag-connect-llc-cable-tag-connect-tc2030-icespi-locking-cable-37194435920095.jpg?v=1758031875"},{"product_id":"tag-connect-tc2030-pkt-programming-cable","title":"Tag-Connect TC2030-PKT 6-Pin Programming Cable for PICkit","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional Microcontroller Programming Solution\u003c\/h2\u003e\nThe Tag Connect TC2030-PKT is a professional-grade 6-pin pogo pin programming cable specifically designed for use with Microchip PICkit 3, 4, and 5 programmers. This innovative cable eliminates the need for permanent programming connectors on your PCB whilst providing reliable ICSP (In-Circuit Serial Programming) connectivity.\n\n\u003ch3\u003eUltra-Compact PCB Footprint\u003c\/h3\u003e \u003cdiv class=\"spec-note\"\u003e The TC2030-PKT requires only a tiny 0.02 square inch footprint on your PCB—approximately the same space as an 0805 resistor. This miniature footprint includes six contact pads (0.5mm pitch) and four alignment holes for secure positioning. \u003c\/div\u003e \u003ch3\u003eSecure Connection with Plastic Legs\u003c\/h3\u003e\nFour precision-moulded plastic legs clip securely into dedicated PCB holes, maintaining firm mechanical connection during extended debugging sessions. The spring-loaded pogo pins ensure reliable electrical contact rated for over 100,000 connection cycles.\n\n\u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e \u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eTC2030 Pin\u003c\/th\u003e\n\u003cth\u003ePICkit Pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eVDD\u003c\/td\u003e\n\u003ctd\u003eTarget Power (3.3V\/5V)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003ePGD\u003c\/td\u003e\n\u003ctd\u003eProgramming Data (ICSPDAT)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eMCLR\u003c\/td\u003e\n\u003ctd\u003eMaster Clear\/VPP\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003ePGC\u003c\/td\u003e\n\u003ctd\u003eProgramming Clock (ICSPCLK)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround Reference\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eNC\u003c\/td\u003e\n\u003ctd\u003eNo Connection\/AUX\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003c\/div\u003e \u003ch3\u003ePCB Design Guidelines\u003c\/h3\u003e \u003cdiv class=\"aside\"\u003e Critical: Ensure no solder paste is applied to contact pads. Set paste mask layer to zero for all TC2030 pads in your CAD software. Maintain 0.020\" clearance around contact pads for optimal connection reliability. \u003c\/div\u003e \u003cpre\u003e\u003ccode\u003e\/\/ Example PIC configuration for ICSP #pragma config MCLRE = ON \/\/ MCLR pin enabled #pragma config WDTE = OFF \/\/ Watchdog timer disabled #pragma config PWRTE = ON \/\/ Power-up timer enabled #pragma config FOSC = INTRC_NOCLKOUT \/\/ Internal RC oscillator \u003c\/code\u003e\u003c\/pre\u003e \u003ch3\u003eProduction vs Development Use\u003c\/h3\u003e\nThe legged TC2030-PKT version excels in development environments where sustained connections are required for debugging, single-stepping, and real-time variable monitoring. For high-volume production programming, consider the TC2030-PKT-NL (no legs) variant for faster operation.\n\n\u003c\/section\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Legged (TC2030-PKT)","offer_id":55799255302519,"sku":"TC2030-PKT","price":52.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs (TC2030-PKT-NL)","offer_id":55799255335287,"sku":"TC2030-PKT-NL","price":52.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2030-pkt-tag-connect-tc2030-pkt-6-pin-pogo-pin-cable-72345555894647.png?v=1732585243"},{"product_id":"tag-connect-tc2030-pkt-swd-cable","title":"Tag-Connect TC2030-PKT-SWD 6-Pin SWD Cable for PICkit 4\/5 and SNAP","description":"\u003csection class=\"product-rich\"\u003e \u003ch2\u003eProfessional SWD Programming Solution for ARM Cortex MCUs\u003c\/h2\u003e \u003cp\u003eThe TC2030-PKT-SWD cable provides a \u003cstrong\u003ereliable connection\u003c\/strong\u003e for programming and debugging SAM ARM Cortex microcontrollers using Microchip PICkit 4, PICkit 5, or SNAP debuggers. This specialized cable features an \u003cstrong\u003e8-pin SIP connector\u003c\/strong\u003e designed specifically for SWD (Serial Wire Debug) protocol.\u003c\/p\u003e \u003ch3\u003eWiring Quick-Start\u003c\/h3\u003e \u003cp\u003eConnect the cable to your PICkit 4\/5\/SNAP by aligning \u003cstrong\u003ePin 1\u003c\/strong\u003e of the TC2030-PKT-SWD with \u003cstrong\u003ePin 1\u003c\/strong\u003e of the debugger's 8-pin connector. The cable automatically maps SWD signals to the correct pins:\u003c\/p\u003e \u003cdiv class=\"tbl\"\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003eSignal\u003c\/th\u003e \u003cth\u003ePICkit 4\/5\/SNAP Pin\u003c\/th\u003e \u003cth\u003eTC2030 Pin\u003c\/th\u003e \u003cth\u003eFunction\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eNMCLR\/RESET\u003c\/td\u003e \u003ctd\u003e1\u003c\/td\u003e \u003ctd\u003e3\u003c\/td\u003e \u003ctd\u003eTarget reset control\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVDD VIOREF\u003c\/td\u003e \u003ctd\u003e2\u003c\/td\u003e \u003ctd\u003e1\u003c\/td\u003e \u003ctd\u003eVoltage reference\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eGND\u003c\/td\u003e \u003ctd\u003e3\u003c\/td\u003e \u003ctd\u003e5\u003c\/td\u003e \u003ctd\u003eGround connection\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSWO\u003c\/td\u003e \u003ctd\u003e4\u003c\/td\u003e \u003ctd\u003e6\u003c\/td\u003e \u003ctd\u003eSerial Wire Output\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSWCLK\u003c\/td\u003e \u003ctd\u003e5\u003c\/td\u003e \u003ctd\u003e4\u003c\/td\u003e \u003ctd\u003eSerial Wire Clock\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSWDIO\u003c\/td\u003e \u003ctd\u003e8\u003c\/td\u003e \u003ctd\u003e2\u003c\/td\u003e \u003ctd\u003eSerial Wire Data I\/O\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003ch3\u003ePCB Footprint Requirements\u003c\/h3\u003e \u003cp\u003eThe TC2030 footprint requires a compact \u003cstrong\u003e7.0 × 4.0 mm area\u003c\/strong\u003e on your PCB with six contact pads and four leg retention holes. The \u003cspan class=\"spec-note\"\u003espring-loaded pogo pins\u003c\/span\u003e make reliable contact with the PCB pads, whilst the four plastic legs clip securely into matching holes for \u003cstrong\u003ehands-free operation\u003c\/strong\u003e during extended debugging sessions.\u003c\/p\u003e \u003cdiv class=\"aside\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e This cable is exclusively for SAM ARM Cortex MCUs using SWD protocol. For Microchip PIC programming, use the standard TC2030-PKT cable. \u003c\/div\u003e \u003ch3\u003eReady-to-Run Code Example\u003c\/h3\u003e \u003cp\u003eConnect your SAM MCU for immediate programming:\u003c\/p\u003e \u003cpre\u003e\u003ccode\u003e\/\/ Configure SWD pins in your PCB design \/\/ Pin 1 (VDD): Connect to MCU VDD \/\/ Pin 2 (SWDIO): Connect to MCU SWDIO \/\/ Pin 3 (RESET): Connect to MCU RESET \/\/ Pin 4 (SWCLK): Connect to MCU SWCLK \/\/ Pin 5 (GND): Connect to MCU ground \/\/ Pin 6 (SWO): Connect to MCU SWO (optional)\u003c\/code\u003e\u003c\/pre\u003e \u003cdiv class=\"imgph\"\u003eTC2030 PCB footprint diagram showing pad layout and dimensions\u003c\/div\u003e \u003c\/section\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Legged (TC2030-PKT-SWD)","offer_id":55799326310775,"sku":"TC2030-PKT-SWD","price":52.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs (TC2030-PKT-SWD-NL)","offer_id":55799326343543,"sku":"TC2030-PKT-SWD-NL","price":52.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2030-pkt-swd-tag-connect-tc2030-pkt-swd-cable-71069944512887.png?v=1729993787"},{"product_id":"tag-connect-tc2030-swim-cable-uk","title":"Tag-Connect TC2030-SWIM 6-Pin Plug-of-Nails Cable for STM8 SWIM (Legged or No Legs)","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003eSTM8 SWIM From an ST-LINK to Six Pads on Your PCB\u003c\/h3\u003e\n\u003cp\u003eThe TC2030-SWIM is a TC2030-MCP cable modified with a 4-pin SWIM connector (the No Legs TC2030-SWIM-NL is built from the TC2030-MCP-NL). It plugs into the SWIM connector of an ST-LINK\/V2, so you can program and debug STM8 microcontrollers through the 6-pin TC2030 footprint instead of a fitted header.\u003c\/p\u003e\n\u003ch4\u003eOptions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eChoice\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eLegs clip into leg latch holes in the PCB, so the cable holds itself in place (TC2030-SWIM)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNo leg holes, so a smaller footprint; hold by hand, with a \u003ca href=\"\/products\/tag-connect-tc2030-clip-retainer\"\u003eTC2030-CLIP\u003c\/a\u003e or mount it in a test fixture with a \u003ca href=\"\/products\/tag-connect-tc2030-mount\"\u003eTC-MOUNT-6\u003c\/a\u003e bracket (TC2030-SWIM-NL)\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003ePinout\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eTC2030 Pin\u003c\/th\u003e\n\u003cth\u003eSWIM Signal\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVDD\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eDATA (SWIM)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eRESET\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eNot connected\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eNot connected\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eTag-Connect does not publish an overall length for the SWIM versions.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003cp\u003e\u003cstrong\u003ePCB footprint:\u003c\/strong\u003e the standard 6-pin TC2030 footprint. Legged and No Legs cables use the same contact pattern, so a board laid out for the legged footprint takes either cable. Leave the contact pads free of solder paste and keep tracks and vias out of the keep-out area. See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e for footprint drawings.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eSpring-Pin Contacts\u003c\/h4\u003e\n\u003cp\u003eIn Tag-Connect's cycle testing the spring pins last for well over 100,000 operations; Tag-Connect says the ribbon cable is usually the first part to fail.\u003c\/p\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cp\u003eEngineers who program or debug STM8 boards over SWIM and want six pads on the PCB instead of a fitted SWIM header.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevice Family\u003c\/th\u003e\n\u003cth\u003eDebugger or Programmer\u003c\/th\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eST STM8 MCUs, SWIM\u003c\/td\u003e\n\u003ctd\u003eST-LINK\/V2\u003c\/td\u003e\n\u003ctd\u003ePlugs into the ST-LINK\/V2's 4-pin SWIM connector\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eST STM8 MCUs, SWIM\u003c\/td\u003e\n\u003ctd\u003eSTLINK-V3SET\u003c\/td\u003e\n\u003ctd\u003ePlugs into the 4-pin SWIM header on the STLINK-V3SET's MB1440 adapter board (SWIM is only available through that board)\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003eWhen to Choose a Different Cable\u003c\/h4\u003e\n\u003cp\u003eThis cable carries SWIM only. For STM32 over SWD with an ST-LINK\/V2, Tag-Connect lists the \u003ca href=\"\/products\/tag-connect-arm20-ctx-20-pin-to-tc2030-idc-adapter-uk\"\u003eARM20-CTX\u003c\/a\u003e adapter with a \u003ca href=\"\/products\/tag-connect-tc2030-idc-cable\"\u003eTC2030-IDC\u003c\/a\u003e cable. With an STLINK-V3, it lists the \u003ca href=\"\/products\/tag-connect-tc2030-ctx-st14-cable\"\u003eTC2030-CTX-STDC14\u003c\/a\u003e (or the No Legs \u003ca href=\"\/products\/tag-connect-tc2030-ctx-st14-cable?variant=57737456222583\"\u003eTC2030-CTX-NL-STDC14\u003c\/a\u003e); for other Cortex debuggers, see the \u003ca href=\"\/products\/tag-connect-tc2030-ctx-cable-uk\"\u003eTC2030-CTX\u003c\/a\u003e. For a Microchip ICD with an RJ12 socket, use the \u003ca href=\"\/products\/tag-connect-tc2030-mcp-cable-uk\"\u003eTC2030-MCP\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eCompare the Versions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-SWIM\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging: clips in and stays connected hands-free\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2030-SWIM-NL\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eProduction programming, or debugging with a TC2030-CLIP; smaller footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eBoth versions use the same six-pad contact pattern and pinout; only the head differs.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n","brand":"Tag-Connect, LLC","offers":[{"title":"Legged","offer_id":37768447131837,"sku":"TC2030-SWIM","price":75.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs","offer_id":57730935226743,"sku":"TC2030-SWIM-NL","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2030-swim-tag-connect-6-pin-pogo-pin-cable-tc2030-swim-debug-store-uk-41800637382879.jpg?v=1714001515"},{"product_id":"tag-connect-tc2050-idc-050-plug-of-nails-debug-cable","title":"Tag-Connect TC2050-IDC-050 10-Pin Plug-of-Nails Cable for 0.05 in Cortex Debug (Legged or No Legs)","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003e10-Pin Plug-of-Nails Cable for the 10-Pin 0.05 in Cortex Debug Connector\u003c\/h3\u003e\n\u003cp\u003eThe Tag-Connect TC2050-IDC-050 connects a debugger with the 10-pin 0.05 in (1.27 mm) Cortex Debug header, the Samtec FTSH-105 style micro-header found on the Keil ULINK2 and similar probes, to a 10-pad TC2050 footprint on your PCB. No connector is fitted to the board. The wiring is 1-to-1 except that pins 5 and 9 are not connected.\u003c\/p\u003e\n\u003ch4\u003eOptions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eChoice\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eFour legs latch into holes in the PCB, so the cable holds itself in place (TC2050-IDC-050)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNo leg holes; footprint about 0.03 sq in; hold by hand, with a \u003ca href=\"\/products\/tag-connect-tc2050-clip-uk\"\u003eTC2050-CLIP\u003c\/a\u003e or in a fixture (TC2050-IDC-NL-050)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRibbon\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eRibbon connector fitted in the standard orientation, pin 1 to pin 1\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRibbon\u003c\/td\u003e\n\u003ctd\u003eLEMTA\u003c\/td\u003e\n\u003ctd\u003eRibbon connector fitted reversed, the orientation Tag-Connect uses to correct the reversed pin numbering of the Atmel-ICE; No Legs only (TC2050-IDC-NL-050-LEMTA)\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cdiv class=\"aside\"\u003e \u003cp\u003e\u003cstrong\u003ePCB footprint:\u003c\/strong\u003e the same ten-pad TC2050 footprint as the TC2050-IDC: ten contact pads at 0.05 in pitch with three alignment holes; the Legged footprint adds four leg latch holes. No solder paste on the contact pads. The footprint drawings are on sheet 1 of the TC2050-IDC and TC2050-IDC-NL datasheets under Downloads. Sheet 2 of each shows the 0.1 in TC2050-IDC cable, not this one. See also our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003ePin Assignment\u003c\/h4\u003e\n\u003cp\u003eTC2050 pad n goes to connector pin n, except pads 5 and 9. Signals follow the Arm 10-pin Cortex Debug connector:\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePad and Pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003ePad and Pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVTref\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO \/ TMS\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK \/ TCK\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eNot connected (GND on the header)\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO \/ TDO\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eKey (no signal)\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eTDI\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eNot connected (GNDDetect on the header)\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003ePins 5 and 9\u003c\/h4\u003e\n\u003cp\u003eOn the 10-pin Cortex Debug header, pins 5 and 9 are ground and ground-detect. This cable leaves them unconnected, similar to the wiring of the TC2050-ARM2010 adapter. If your probe or target needs pins 5 and 9 connected, use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-050-all-cable-uk\"\u003eTC2050-IDC-050-ALL\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eSpring-Pin Contacts\u003c\/h4\u003e\n\u003cp\u003eTag-Connect quotes over 100,000 operations for the spring pins. The 0.05 in connector uses fine-pitch ribbon with thin conductors, which Tag-Connect says can break over time with repeated flexing. For a debugger with a 0.1 in header, the \u003ca href=\"\/products\/tag-connect-tc2050-idc-cable-uk\"\u003eTC2050-IDC\u003c\/a\u003e uses heavier ribbon and is the more durable choice.\u003c\/p\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cp\u003eEngineers who debug or program Arm Cortex-M boards over SWD or JTAG from a probe with the 10-pin 0.05 in Cortex Debug header, and want no debug header on the PCB.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevice Family\u003c\/th\u003e\n\u003cth\u003eDebugger or Programmer\u003c\/th\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eArm Cortex-M devices, for example STM32, NXP LPC and Kinetis, Microchip SAM and Nordic nRF, SWD or JTAG\u003c\/td\u003e\n\u003ctd\u003eKeil ULINK2 and other probes with the 10-pin 0.05 in Cortex Debug (FTSH-105) header\u003c\/td\u003e\n\u003ctd\u003eDirect\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003eWhen to Choose a Different Cable\u003c\/h4\u003e\n\u003cp\u003eFor pins 5 and 9 connected, or for the Microchip Atmel-ICE, use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-050-all-cable-uk\"\u003eTC2050-IDC-050-ALL\u003c\/a\u003e (Tag-Connect recommends it in the LEMTA orientation for the Atmel-ICE). For a 20-pin 0.05 in Cortex probe use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-050-all-20-cable\"\u003eTC2050-IDC-050-ALL-20\u003c\/a\u003e. For a debugger with a 20-pin 0.1 in Arm JTAG header use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-cable-uk\"\u003eTC2050-IDC\u003c\/a\u003e with the \u003ca href=\"\/products\/tag-connect-tc2050-arm2010-adapter-uk\"\u003eTC2050-ARM2010\u003c\/a\u003e adapter.\u003c\/p\u003e\n\u003ch4\u003eCompare the Versions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eRibbon\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-050\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging: clips in and stays connected hands-free\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-NL-050\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eProduction programming, or debugging with a TC2050-CLIP; smallest footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-NL-050-LEMTA\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eLEMTA (reversed)\u003c\/td\u003e\n\u003ctd\u003eRibbon connector reversed (LEMTA). For the Atmel-ICE, Tag-Connect recommends the TC2050-IDC-050-ALL in LEMTA.\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eAll three versions use the same ten-pad contact pattern. TC2050-IDC-050 and TC2050-IDC-NL-050 leave pins 5 and 9 unconnected; check the LEMTA version's wiring with us before ordering.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n","brand":"Tag-Connect, LLC","offers":[{"title":"Legged \/ Standard","offer_id":55783739064695,"sku":"TC2050-IDC-050","price":70.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ Standard","offer_id":55783739097463,"sku":"TC2050-IDC-NL-050","price":70.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ LEMTA","offer_id":57730657976695,"sku":"TC2050-IDC-NL-050-LEMTA","price":70.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2050-idc-050-tag-connect-tc2050-idc-050-cable-71069962273143.png?v=1729994141"},{"product_id":"tag-connect-tc2050-idc-050-all-20-cable","title":"Tag-Connect TC2050-IDC-050-ALL-20 10-Pin Cable for 20-Pin 0.05 in Cortex Debug (Legged or No Legs)","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003eTen Pads on Your PCB to a 20-Pin 0.05 in Cortex Debug Probe\u003c\/h3\u003e\n\u003cp\u003eThe Tag-Connect TC2050-IDC-050-ALL-20 connects a debugger with the 20-pin 0.05 in (1.27 mm) Cortex Debug + ETM header, the Samtec FTSH-110 style micro-header, to a 10-pad TC2050 footprint on your PCB, with no connector fitted to the board. Pins 1 to 10 are wired 1-to-1 to the ten pads, so SWD and JTAG reach the target. Pins 11 to 20, which on the 20-pin header carry the trace clock and data, extra grounds and, on some probes, a target power feed, are not connected.\u003c\/p\u003e\n\u003ch4\u003eOptions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eChoice\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eFour legs latch into holes in the PCB, so the cable holds itself in place\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNo leg holes; footprint about 0.03 sq in; hold by hand, with a \u003ca href=\"\/products\/tag-connect-tc2050-clip-uk\"\u003eTC2050-CLIP\u003c\/a\u003e or in a fixture\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003eTC2050-IDC-050-ALL-20 Pinout\u003c\/h4\u003e\n\u003cp\u003eTC2050 pad n goes to connector pin n for pins 1 to 10. Signals follow the Arm Cortex Debug connector:\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePad and Pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003ePad and Pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVTref\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO \/ TMS\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK \/ TCK\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO \/ TDO\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eKey (no signal)\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eTDI\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eGNDDetect\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eConnector pins 11 to 20 are not connected, so parallel trace (TRACECLK and TRACEDATA) is not available through this cable, and a probe that feeds target power on pins 11 and 13 cannot power the target through it. SWO on pin 6 is connected.\u003c\/p\u003e\n\u003cp\u003eOn the footprint the pads are numbered 1 to 5 along one row and 6 to 10 back along the other, so pad 10 sits opposite pad 1. They are not arranged odd and even like the header: follow the footprint drawing.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003cp\u003e\u003cstrong\u003ePCB footprint:\u003c\/strong\u003e ten contact pads at 0.05 in pitch and three alignment holes; the Legged footprint adds four leg latch holes. Keep solder paste off the contact pads. The footprint drawings are in the TC2050-IDC (Legged) and TC2050-IDC-NL (No Legs) datasheets under Downloads. See also our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eSpring-Pin Contacts\u003c\/h4\u003e\n\u003cp\u003eTag-Connect quotes over 100,000 operations for the TC2050 spring pins. The 0.05 in connector uses fine-pitch ribbon with thin conductors, which Tag-Connect says can break over time with repeated flexing, so avoid sharp bends and repeated flexing at the connector.\u003c\/p\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cp\u003eEngineers who program or debug Arm Cortex boards over SWD or JTAG from a probe with the 20-pin 0.05 in Cortex Debug + ETM header, and want no debug header on the PCB.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevice Family\u003c\/th\u003e\n\u003cth\u003eDebugger or Programmer\u003c\/th\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eArm Cortex-M devices, SWD or JTAG\u003c\/td\u003e\n\u003ctd\u003eKeil ULINKpro\u003c\/td\u003e\n\u003ctd\u003eDirect, on the 20-pin 0.05 in Cortex Debug + ETM header inside the probe (remove the cover)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eArm Cortex devices, SWD or JTAG\u003c\/td\u003e\n\u003ctd\u003eIAR I-jet\u003c\/td\u003e\n\u003ctd\u003eDirect, on the I-jet's MIPI-20 (20-pin 0.05 in) connector; parallel trace is not carried\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eThe Keil ULINK2 and ULINKplus have the 10-pin 0.05 in Cortex Debug connector: use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-050-all-cable-uk\"\u003eTC2050-IDC-050-ALL\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eLimitations\u003c\/h4\u003e\n\u003cp\u003eNot the right cable when you need parallel trace: only pins 1 to 10 are connected. Not for a debugger with only the 20-pin 0.1 in Arm JTAG header (use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-cable-uk\"\u003eTC2050-IDC\u003c\/a\u003e with the \u003ca href=\"\/products\/tag-connect-tc2050-arm2010-adapter-uk\"\u003eTC2050-ARM2010\u003c\/a\u003e adapter), or for a Microchip Atmel-ICE (use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-050-all-cable-uk\"\u003eTC2050-IDC-050-ALL\u003c\/a\u003e with the Ribbon option set to LEMTA, which has the ribbon connector fitted reversed).\u003c\/p\u003e\n\u003ch4\u003eCompare the Versions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-050-ALL-20\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eTen pads, three alignment holes and four leg latch holes\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging: clips in and stays connected hands-free\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-NL-050-ALL-20\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eTen pads and three alignment holes, about 0.03 sq in\u003c\/td\u003e\n\u003ctd\u003eProduction programming, or debugging with a TC2050-CLIP; smallest footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eBoth versions use the same ten-pad contact pattern and the same wiring; only the head differs.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n","brand":"Tag-Connect, LLC","offers":[{"title":"Legged","offer_id":37768450932925,"sku":"TC2050-IDC-050-ALL-20","price":68.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs","offer_id":57730730230135,"sku":"TC2050-IDC-NL-050-ALL-20","price":68.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2050-idc-050-all-20-tag-connect-tc2050-idc-050-all-20-cable-71069965287799.png?v=1729994144"},{"product_id":"tag-connect-tc2070-idc-050-cable","title":"Tag-Connect TC2070-IDC-050 14-Pin Programming Cable","description":"\u003csection class=\"product-rich\"\u003e\n\u003ch3\u003eDevelopment-Ready Programming Solution\u003c\/h3\u003e\n\u003cp\u003eThe TC2070-IDC-050 combines professional microcontroller programming capabilities with hands-free debugging convenience through its integrated retention system. This legged version features four plastic clips that securely lock onto the PCB, enabling sustained development sessions without manual cable holding.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e\n\u003ch4\u003eKey Connection Points\u003c\/h4\u003e\n\u003cp\u003e14-pin \"Plug-of-Nails\" spring-pin connector with plastic retention legs on the PCB end, whilst the debugger end terminates in a 0.05\" pitch (1.27mm) female IDC connector for modern STDC14-compatible programmers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePCB Footprint \u0026amp; Retention System\u003c\/h3\u003e\n\u003cp\u003eRequires gold-plated test pads, three alignment holes, plus four additional mounting holes for the plastic retention legs. The complete TC2070 footprint measures approximately 16.5mm x 11.1mm including leg clearance areas, providing secure attachment during extended debugging sessions.\u003c\/p\u003e\n\u003cdiv class=\"tbl\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCB End\u003c\/td\u003e\n\u003ctd\u003e14-pin spring contacts (with legs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDebugger End\u003c\/td\u003e\n\u003ctd\u003e0.05\" pitch female IDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003eApproximately 200mm (8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact Rating\u003c\/td\u003e\n\u003ctd\u003e100,000+ operations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetention System\u003c\/td\u003e\n\u003ctd\u003e4 plastic clips + 3 alignment pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4\u003eWiring Quick-Start\u003c\/h4\u003e\n\u003cpre\u003e\u003ccode\u003e STDC14 Pin TC2070 Pin Signal -----------+-----------+-------- 3 1 VCC 4 2 SWDIO\/TMS 5 3 GND 6 4 SWCLK\/TCK 7 5 GND 8 6 SWO\/TDO 9 7 KEY (NC) 10 8 TDI 11 9 GND Reset 12 10 Reset 13 11 N\/C 14 12 N\/C 1 13 N\/C 2 14 N\/C \u003c\/code\u003e\u003c\/pre\u003e\n\u003cdiv class=\"spec-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eDevelopment Advantage:\u003c\/strong\u003e Retention legs enable hands-free debugging, breakpoint setting, and code stepping without holding the cable manually.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"imgph\"\u003ePCB footprint layout showing contact pads, alignment holes, and leg mounting holes\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tag-Connect, LLC","offers":[{"title":"Legged (TC2070-IDC-050)","offer_id":55803559018871,"sku":"TC2070-IDC-050","price":66.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs (TC2070-IDC-NL-050)","offer_id":55803559051639,"sku":"TC2070-IDC-NL-050","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tc2070-idc-050-tag-connect-tc2070-idc-050-cable-72351416156535.png?v=1732671473"},{"product_id":"tag-connect-tc2070-idc-2mm-cable","title":"Tag-Connect TC2070-IDC-2MM 14-Pin Plug-of-Nails Cable, 2 mm IDC (Legged or No Legs)","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003e14-Pin Plug-of-Nails Cable with a 2 mm IDC Connector\u003c\/h3\u003e\n\u003cp\u003eThe 14-pin 2 mm IDC socket carries whatever your tool puts on its 14-pin 2 mm header, typically JTAG on a Xilinx (AMD) Platform Cable. Pad numbers are shown on the footprint drawings in the datasheets under Downloads.\u003c\/p\u003e\n\u003ch4\u003eOptions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eChoice\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eFour legs latch into holes in the PCB, so the cable holds itself in place (TC2070-IDC-2MM)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNo leg holes, so a smaller footprint; hold by hand, with a \u003ca href=\"\/products\/tag-connect-three-pack-of-grip-14-retainers-uk\"\u003eGRIP-14\u003c\/a\u003e retainer for short holds, or build into a test fixture with a \u003ca href=\"\/products\/tag-connect-tc2070-mount\"\u003eTC-MOUNT-14\u003c\/a\u003e bracket (TC2070-IDC-NL-2MM)\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003ePhotos show the 0.1 in socket. The cable supplied has the 2 mm socket.\u003c\/p\u003e\n\u003cp\u003eBoth versions end in a 2x7 2 mm pitch female IDC socket, with 100 mm of ribbon between the connectors. For drawings, Tag-Connect's 2 mm product pages refer to the 0.1 in TC2070-IDC and TC2070-IDC-NL datasheets, which it says are similar apart from the 2 mm connector and cable.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003cp\u003e\u003cstrong\u003ePCB footprint:\u003c\/strong\u003e the same TC2070 footprint as the 0.1 in cables. Fourteen contact pads at 0.05 in pitch in two rows of seven, with three alignment holes; the Legged footprint adds four leg latch holes. No solder paste on the contact pads, no tracks or vias in the keep-out area, and no components taller than 1.0 mm under the connector. Name the footprint TC2070-FP (or TC2070-NL-FP) and mark it Do Not Install in your BOM. See the datasheets under Downloads.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eSpring-Pin Contacts\u003c\/h4\u003e\n\u003cp\u003eIn Tag-Connect's cycle testing, its spring pins last for well over 100,000 operations.\u003c\/p\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cp\u003eEngineers whose programmer or debugger has a 14-pin 2 mm male header (pins, not a socket), and who want pads on the PCB instead of a fitted header. Tools with a female 14-pin 2 mm connector, such as the Digilent JTAG-HS2 and JTAG-HS3, do not plug into this cable.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevice Family\u003c\/th\u003e\n\u003cth\u003eDebugger or Programmer\u003c\/th\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eXilinx (AMD) FPGAs and CPLDs, JTAG\u003c\/td\u003e\n\u003ctd\u003eXilinx Platform Cable USB II\u003c\/td\u003e\n\u003ctd\u003ePlugs onto the pod's 14-pin 2 mm header\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eTo use a smaller 10-pin footprint with a Platform Cable, see the \u003ca href=\"\/products\/tc2050-xilinx-adapter-tag-connect-uk\"\u003eTC2050-XILINX\u003c\/a\u003e adapter with a TC2050-IDC cable.\u003c\/p\u003e\n\u003ch4\u003eWhen to Choose a Different Cable\u003c\/h4\u003e\n\u003cp\u003eFor a tool with a 14-pin 0.1 in connector, such as a TI MSP-FET for MSP430, use the \u003ca href=\"\/products\/tag-connect-tc2070-idc-cable-uk\"\u003eTC2070-IDC\u003c\/a\u003e. For a tool with a 14-pin 0.05 in connector, such as ST's STLINK-V3SET, use the \u003ca href=\"\/products\/tag-connect-tc2070-idc-050-cable\"\u003eTC2070-IDC-050\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eCompare the Versions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2070-IDC-2MM\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003e2 mm female\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging: clips in and stays connected hands-free\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2070-IDC-NL-2MM\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003e2 mm female\u003c\/td\u003e\n\u003ctd\u003eProduction programming by hand or in a test fixture; smaller footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eBoth versions use the same fourteen-pad contact pattern; only the head differs.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n","brand":"Tag-Connect, LLC","offers":[{"title":"Legged","offer_id":37768451096765,"sku":"TC2070-IDC-2MM","price":66.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs","offer_id":57730929951095,"sku":"TC2070-IDC-NL-2MM","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/products\/tag-connect-llc-cable-tag-connect-tc2070-idc-2mm-cable-30224014278845.jpg?v=1685203313"},{"product_id":"tag-connect-tc2050-idc-050-all-cable-uk","title":"Tag-Connect TC2050-IDC-050-ALL 10-Pin Cable for 0.05 in Cortex Debug, All Pins (Legged or No Legs)","description":"\u003csection class=\"product-rich\"\u003e\u003ch3\u003eAll Ten Cortex Debug Pins From a 0.05 in Probe to Ten Pads on Your PCB\u003c\/h3\u003e\n\u003cp\u003eThe Tag-Connect TC2050-IDC-050-ALL connects a debugger with the 10-pin 0.05 in (1.27 mm) Cortex Debug header, the Samtec FTSH-105 style micro-header, to a 10-pad TC2050 footprint on your PCB, with no connector fitted to the board. All ten conductors are wired 1-to-1, including pins 5 and 9, so it carries SWD and JTAG.\u003c\/p\u003e\n\u003ch4\u003eOptions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eChoice\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eFour legs latch into holes in the PCB, so the cable holds itself in place\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNo leg holes; footprint about 0.03 sq in; hold by hand, with a \u003ca href=\"\/products\/tag-connect-tc2050-clip-uk\"\u003eTC2050-CLIP\u003c\/a\u003e or in a fixture\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSqueeze\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eRegular-tension squeeze tabs on the Legged head; holds through long debug sessions\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSqueeze\u003c\/td\u003e\n\u003ctd\u003eSoft Squeeze\u003c\/td\u003e\n\u003ctd\u003eSofter tabs for frequent production programming; Legged only, not suited to debugging\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRibbon\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eRibbon connector in the standard orientation, pin 1 to pin 1\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRibbon\u003c\/td\u003e\n\u003ctd\u003eLEMTA (for Atmel-ICE)\u003c\/td\u003e\n\u003ctd\u003eRibbon connector fitted reversed to suit the Microchip Atmel-ICE, whose header numbering is reversed\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003eTC2050-IDC-050-ALL Pinout\u003c\/h4\u003e\n\u003cp\u003eTC2050 pad n goes to connector pin n. The table shows the signals when the cable is plugged into an Arm 10-pin Cortex Debug port, including the Atmel-ICE SAM port. On the LEMTA version the connector is fitted reversed to correct the Atmel-ICE's reversed numbering, so the pads carry the same signals. On the Atmel-ICE AVR port the pads carry that port's AVR signals instead, so check the Atmel-ICE user guide before laying out an AVR board.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePad and Pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003cth\u003ePad and Pin\u003c\/th\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eVTref\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSWDIO \/ TMS\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSWCLK \/ TCK\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSWO \/ TDO\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eKey (no signal)\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eTDI\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eGNDDetect\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003enRESET\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eOn the footprint the pads are numbered 1 to 5 along one row and 6 to 10 back along the other, so pad 10 sits opposite pad 1. They are not arranged odd and even like the header: follow the footprint drawing.\u003c\/p\u003e\n\u003cdiv class=\"aside\"\u003e \u003cp\u003e\u003cstrong\u003ePCB footprint:\u003c\/strong\u003e ten contact pads at 0.05 in pitch and three alignment holes; the Legged footprint adds four leg latch holes. Keep solder paste off the contact pads. The drawings are in the TC2050-IDC (Legged) and TC2050-IDC-NL (No Legs) datasheets under Downloads.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eSpring-Pin Contacts\u003c\/h4\u003e\n\u003cp\u003eTag-Connect quotes over 100,000 operations for the TC2050 spring pins. The 0.05 in connector uses fine-pitch ribbon with thin conductors, which Tag-Connect says can break over time with repeated flexing. If your debugger also has the 20-pin 0.1 in Arm JTAG header, the \u003ca href=\"\/products\/tag-connect-tc2050-idc-cable-uk\"\u003eTC2050-IDC\u003c\/a\u003e with the \u003ca href=\"\/products\/tag-connect-tc2050-arm2010-adapter-uk\"\u003eTC2050-ARM2010\u003c\/a\u003e adapter uses heavier ribbon and is the more durable choice, though that route leaves pins 5 and 9 unconnected.\u003c\/p\u003e\n\u003cdiv class=\"callout\"\u003e \u003cp\u003e\u003cstrong\u003eAtmel-ICE users:\u003c\/strong\u003e the Atmel-ICE numbers its 10-pin header in reverse. Order the LEMTA ribbon, which has the connector fitted reversed. Tag-Connect warns that a standard cable plugged into an Atmel-ICE will short out power and other signals.\u003c\/p\u003e \u003c\/div\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cp\u003eEngineers who program or debug boards over SWD or JTAG from a probe with the 10-pin 0.05 in Cortex Debug header, and want no debug header on the PCB.\u003c\/p\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003eDevice Family\u003c\/th\u003e\n\u003cth\u003eDebugger or Programmer\u003c\/th\u003e\n\u003cth\u003eRibbon\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eArm Cortex-M devices, SWD or JTAG\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/pages\/keil-ulink2-debugger-application\"\u003eKeil ULINK2\u003c\/a\u003e and other probes with the 10-pin 0.05 in Cortex Debug (FTSH-105) header\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCypress (now Infineon) PSoC and other Cypress MCUs, JTAG. The SWD signals also pass through; for an SWD-only board Tag-Connect recommends the 6-pin TC2030-CTX\u003c\/td\u003e\n\u003ctd\u003eCypress MiniProg3, MiniProg4\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMicrochip SAM (Arm) devices from the Atmel-ICE SAM port, JTAG or SWD; AVR devices from the AVR port, JTAG, PDI, aWire, SPI or debugWIRE\u003c\/td\u003e\n\u003ctd\u003eMicrochip Atmel-ICE\u003c\/td\u003e\n\u003ctd\u003eLEMTA\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003ch4\u003eLimitations\u003c\/h4\u003e\n\u003cp\u003eNot the right cable for a 20-pin 0.05 in Cortex probe (use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-050-all-20-cable\"\u003eTC2050-IDC-050-ALL-20\u003c\/a\u003e) or a debugger with only the 20-pin 0.1 in Arm JTAG header (use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-cable-uk\"\u003eTC2050-IDC\u003c\/a\u003e with the \u003ca href=\"\/products\/tag-connect-tc2050-arm2010-adapter-uk\"\u003eTC2050-ARM2010\u003c\/a\u003e adapter). If your target must not see pins 5 and 9, use the \u003ca href=\"\/products\/tag-connect-tc2050-idc-050-plug-of-nails-debug-cable\"\u003eTC2050-IDC-050\u003c\/a\u003e, which leaves them unconnected.\u003c\/p\u003e\n\u003ch4\u003eCompare the Versions\u003c\/h4\u003e\n\u003ctable class=\"tbl\"\u003e \u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eHead\u003c\/th\u003e\n\u003cth\u003eSqueeze\u003c\/th\u003e\n\u003cth\u003eRibbon\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-050-ALL\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eDevelopment and debugging: clips in and stays connected hands-free\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-NL-050-ALL\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNone (no tabs)\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eProduction programming, or debugging with a TC2050-CLIP; smallest footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-050-ALL-SOFT\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eSoft Squeeze\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eFrequent production programming on a legged footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-050-ALL-LEMTA\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eStandard tabs\u003c\/td\u003e\n\u003ctd\u003eLEMTA\u003c\/td\u003e\n\u003ctd\u003eAtmel-ICE: development and debugging\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-NL-050-ALL-LEMTA\u003c\/td\u003e\n\u003ctd\u003eNo Legs\u003c\/td\u003e\n\u003ctd\u003eNone (no tabs)\u003c\/td\u003e\n\u003ctd\u003eLEMTA\u003c\/td\u003e\n\u003ctd\u003eAtmel-ICE: production programming, or debugging with a TC2050-CLIP\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTC2050-IDC-050-ALL-LEMTA-SOFT\u003c\/td\u003e\n\u003ctd\u003eLegged\u003c\/td\u003e\n\u003ctd\u003eSoft Squeeze\u003c\/td\u003e\n\u003ctd\u003eLEMTA\u003c\/td\u003e\n\u003ctd\u003eAtmel-ICE: frequent production programming on a legged footprint\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e\n\u003cp\u003eAll six versions use the same ten-pad contact pattern and connect all ten pins; only the head, the squeeze tabs and the ribbon orientation differ.\u003c\/p\u003e\n\u003cp\u003eWhich cable fits your debugger? See our \u003ca href=\"\/collections\/tag-connect-catalogue\"\u003eTag-Connect cable guide\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n","brand":"Tag-Connect, LLC","offers":[{"title":"Legged \/ Standard tabs \/ Standard","offer_id":42773759099103,"sku":"TC2050-IDC-050-ALL","price":70.0,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Standard tabs \/ LEMTA","offer_id":42773759131871,"sku":"TC2050-IDC-050-ALL-LEMTA","price":75.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ Standard tabs \/ Standard","offer_id":57730673901943,"sku":"TC2050-IDC-NL-050-ALL","price":70.0,"currency_code":"GBP","in_stock":true},{"title":"No Legs \/ Standard tabs \/ LEMTA","offer_id":57730673934711,"sku":"TC2050-IDC-NL-050-ALL-LEMTA","price":75.0,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Soft Squeeze \/ Standard","offer_id":57730673967479,"sku":"TC2050-IDC-050-ALL-SOFT","price":85.9,"currency_code":"GBP","in_stock":true},{"title":"Legged \/ Soft Squeeze \/ LEMTA","offer_id":57730674000247,"sku":"TC2050-IDC-050-ALL-LEMTA-SOFT","price":85.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0522\/6931\/8333\/files\/tag-connect-llc-tag-connect-tc2050-idc-050-all-lemta-cable-72344619680119.png?v=1732585259"}],"url":"https:\/\/thedebugstore.com\/collections\/debuggers-and-trace-tools.oembed?page=3","provider":"Debug Store","version":"1.0","type":"link"}