Take your pick from the Total Phase USB Analyser range. Up to 25% off!

USB C PD Analyser

The Total Phase USB Power Delivery Analyzer is a small adapter for recording the Power Delivery protocol traffic on the USB Type-C connector. It connects in-line between two Type-C products, and passively captures all communication between them, on both the CC1 and CC2 signals. While connected, it does not disturb any USB 3.1 Gen 2 or USB 2.0 signals, enabling the capture of PD negotiation for power, USB data roles, and DisplayPort, or other Type-C Alternate Modes.

Buy Now
Beagle USB 12 Analyser

The Beagle™ USB 12 from Total Phase is a full/low speed USB analyser that non-intrusively monitors the USB bus in real-time. This analyzer can monitor the data across the USB bus at 21 ns resolution and is a cost-effective solution for every engineer and developer.  The analyser is galvanically isolated, hence it does not affect the system under test or distort the test results in any way. It also allows you to monitor high-speed devices by connecting them through a Full-speed hub.

Buy Now
USB C PD Analyser

The Total Phase USB Power Delivery Analyzer is a small adapter for recording the Power Delivery protocol traffic on the USB Type-C connector. It connects in-line between two Type-C products, and passively captures all communication between them, on both the CC1 and CC2 signals. While connected, it does not disturb any USB 3.1 Gen 2 or USB 2.0 signals, enabling the capture of PD negotiation for power, USB data roles, and DisplayPort, or other Type-C Alternate Modes.

Buy Now
Beagle USB 12 Analyser

The Beagle™ USB 12 from Total Phase is a full/low speed USB analyser that non-intrusively monitors the USB bus in real-time. This analyzer can monitor the data across the USB bus at 21 ns resolution and is a cost-effective solution for every engineer and developer. The analyser is galvanically isolated, hence it does not affect the system under test or distort the test results in any way. It also allows you to monitor high-speed devices by connecting them through a Full-speed hub.

Buy Now
USB C PD Analyser

The Total Phase USB Power Delivery Analyzer is a small adapter for recording the Power Delivery protocol traffic on the USB Type-C connector. It connects in-line between two Type-C products, and passively captures all communication between them, on both the CC1 and CC2 signals. While connected, it does not disturb any USB 3.1 Gen 2 or USB 2.0 signals, enabling the capture of PD negotiation for power, USB data roles, and DisplayPort, or other Type-C Alternate Modes.

Buy Now
Beagle USB 12 Analyser

The Beagle™ USB 12 from Total Phase is a full/low speed USB analyser that non-intrusively monitors the USB bus in real-time. This analyzer can monitor the data across the USB bus at 21 ns resolution and is a cost-effective solution for every engineer and developer. The analyser is galvanically isolated, hence it does not affect the system under test or distort the test results in any way. It also allows you to monitor high-speed devices by connecting them through a Full-speed hub.

Buy Now