Advanced Cable Tester Module Bundle - USB-C

TP825010
Regular price
£1,650.00
Sale price
£1,650.00
Regular price
£0
Sold out
Unit price
Quantity must be 1 or more

  • Individually measure the DC resistance of VBUS and GND wires
  • Individually measure the DC resistance of VBUS and GND pins in the USB Type-C connector
  • Verify wiring is correct with no shorted or disconnected wires
  • Testing of USB 2.0 pairs is supported at about 518 Mbps, and any present SuperSpeed pairs tested at 5 Gbps or 10 Gbps.
  • This is all you will need for testing USB Type-C cables, whether USB 2.0, USB 3.1 Gen1, USB 3.1 Gen2, or USB 3.2

Test Compatibility/Coverage

  • USB 3.2/3.1/3.0/2.0
  • PD 2.0, PD 3.0
  • Short testing - Dynamic visualization of test results
  • Open testing - Dynamic visualization of test results
  • Continuity testing - Dynamic visualization of test results
  • DC resistance measurement for most wires, with milliohm precision on ground and power wires, ohm resolution on most other wires, continuity check only on high-speed data lines
  • Signal integrity testing of data lines to 12.8 Gbps per channel
  • E-Marker verification
Go to full site