Tag Connect TC2030-FTDI-TTL-232RG-VIP USB to Serial Cable

TC2030-FTDI-TTL-232RG-VIP
Regular price
£90.00
Sale price
£90.00
Regular price
£0
Sold out
Unit price
Quantity must be 1 or more

Revolutionary Debugging Cable with Voltage-Adaptive TTL Interface

The Tag Connect TC2030-FTDI-TTL-232RG-VIP represents a groundbreaking fusion of FTDI's advanced voltage-adaptive TTL-232RG-VIP technology with Tag Connect's patented space-saving connector system. This professional debugging cable eliminates the need for permanent connectors on your PCB whilst offering complete voltage flexibility from 1.8V to 5.25V.

Tag Connect TC2030-FTDI-TTL-232RG-VIP cable product photo

VIP Technology: Voltage Input Power for Ultimate Flexibility

Unlike fixed-voltage cables, the VIP (Voltage Input Power) version adapts to your target system's voltage level. The cable's UART signal output levels automatically match the VCCIO input voltage supplied by your target device, ensuring perfect logic level compatibility across the entire 1.8V to 5.25V range.

Critical Note: VCCIO is a required input from your target system. UART signals will not function without this connection.

TC2030 Connector: Maximum Space Efficiency

The TC2030 "Legged" Tag-Connector features four precision alignment pins that snap securely into a tiny PCB footprint measuring just 0.09 square inches. This revolutionary connector eliminates expensive mating components whilst providing reliable spring-pin contact for extended debugging sessions.

TC2030 Pin Signal Type Wire Colour Description
1 VCCIO Input Red VCC input from target system (1.8V to 5.25V)
2 CTS/TMS Input Brown Clear to Send control input
3 RXD/TDI Input Yellow Receive data input to FTDI
4 TXD/TCLK Output Orange Transmit data output from FTDI
5 GND Ground Black Ground reference
6 RTS/TDO Output Green Request to Send control output

Wiring Quick-Start

Connection to your target microcontroller requires only three essential signals plus power and ground:

 

Professional Tip

For production programming, consider the TC2030-NL version, with no legs for rapid board-to-board operations.

PCB Footprint Requirements

The TC2030 footprint requires six contact pads and four alignment holes on a 0.05" × 0.1" grid. No mating connector is required, saving both cost and PCB real estate.

TC2030 PCB footprint diagram with dimensions
Go to full site