Professional Wireless Debugging for Mobile Applications
The J-Link WiFi represents a breakthrough in embedded debugging technology, combining SEGGER's industry-leading debug capabilities with wireless connectivity. This JTAG/SWD debug probe operates at speeds up to 15MHz, delivering professional-grade debugging performance through a stable WiFi interface.
Wireless Freedom for Modern Development
Eliminate the constraints of physical connections when debugging mobile applications, robotic systems, or embedded devices that require movement during testing. The J-Link WiFi enables remote debugging scenarios previously impossible with traditional wired probes.
Wiring Quick-Start
Connect your target system using the standard 20-pin JTAG/SWD interface:
Pin | Signal | Description |
---|---|---|
1 | VTref | Target reference voltage (1.2V - 5V) |
7 | SWDIO | Serial Wire Data I/O (bidirectional) |
9 | SWCLK | Serial Wire Clock |
13 | SWO | Serial Wire Output (trace data) |
15 | nRESET | Target reset (active low) |
19 | 5V Supply | Target power (max 300mA) |
Even-numbered pins (2, 4, 6, 8, 10, 12, 14, 16, 18, 20) connect to ground.
Network Configuration
The J-Link WiFi includes a built-in web server for easy network configuration. Connect via USB initially to configure WiFi settings through the web interface at the device's IP address.
Professional Software Suite
Includes comprehensive licenses for:
- Unlimited Flash Breakpoints
- J-Flash programming software
- Ozone graphical debugger
- RDI/RDDI interfaces
- GDB Server